Adding upstream version 255.4.upstream/255.4

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 124 insertions, 0 deletions

diff --git a/test/units/testsuite-70.pcrextend.sh b/test/units/testsuite-70.pcrextend.sh
new file mode 100755
index 0000000..318fce0
--- /dev/null
+++ b/test/units/testsuite-70.pcrextend.sh
@@ -0,0 +1,124 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: LGPL-2.1-or-later
+set -eux
+set -o pipefail
+
+# shellcheck source=test/units/util.sh
+. "$(dirname "$0")"/util.sh
+
+export SYSTEMD_LOG_LEVEL=debug
+SD_PCREXTEND="/usr/lib/systemd/systemd-pcrextend"
+
+if [[ ! -x "${SD_PCREXTEND:?}" ]] || ! tpm_has_pcr sha256 11 || ! tpm_has_pcr sha256 15; then
+    echo "$SD_PCREXTEND or PCR sysfs files not found, skipping PCR extension tests"
+    exit 0
+fi
+
+at_exit() {
+    if [[ $? -ne 0 ]]; then
+        # Dump the event log on fail, to make debugging a bit easier
+        jq --seq --slurp </run/log/systemd/tpm2-measure.log
+    fi
+}
+
+trap at_exit EXIT
+
+# Temporarily override sd-pcrextend's sanity checks
+export SYSTEMD_FORCE_MEASURE=1
+
+"$SD_PCREXTEND" --help
+"$SD_PCREXTEND" --version
+"$SD_PCREXTEND" foo
+"$SD_PCREXTEND" --machine-id
+"$SD_PCREXTEND" --tpm2-device=list
+"$SD_PCREXTEND" --tpm2-device=auto foo
+"$SD_PCREXTEND" --tpm2-device=/dev/tpm0 foo
+"$SD_PCREXTEND" --bank=sha256 foo
+"$SD_PCREXTEND" --bank=sha256 --bank=sha256 foo
+"$SD_PCREXTEND" --graceful foo
+"$SD_PCREXTEND" --pcr=15 foo
+"$SD_PCREXTEND" --file-system=/
+"$SD_PCREXTEND" --file-system=/tmp --file-system=/
+"$SD_PCREXTEND" --file-system=/tmp --file-system=/ --pcr=15 --pcr=11
+
+if tpm_has_pcr sha1 11; then
+    "$SD_PCREXTEND" --bank=sha1 --pcr=11 foo
+fi
+
+(! "$SD_PCREXTEND")
+(! "$SD_PCREXTEND" "")
+(! "$SD_PCREXTEND" foo bar)
+(! "$SD_PCREXTEND" --bank= foo)
+(! "$SD_PCREXTEND" --tpm2-device= foo)
+(! "$SD_PCREXTEND" --tpm2-device=/dev/null foo)
+(! "$SD_PCREXTEND" --pcr= foo)
+(! "$SD_PCREXTEND" --pcr=-1 foo)
+(! "$SD_PCREXTEND" --pcr=1024 foo)
+(! "$SD_PCREXTEND" --foo=bar)
+
+unset SYSTEMD_FORCE_MEASURE
+
+# Note: since we're reading the TPM event log as json-seq, the same rules apply to the output
+#       as well, i.e. each record is prefixed by RS (0x1E, 036) and suffixed by LF (0x0A, 012).
+#       LF is usually eaten by bash, but RS needs special handling.
+
+# Save the number of events in the current event log, so we can skip them when
+# checking changes caused by following tests
+RECORD_COUNT="$(jq --seq --slurp '. | length' </run/log/systemd/tpm2-measure.log | tr -d '\036')"
+
+# Let's measure the machine ID
+tpm2_pcrread sha256:15 -Q -o /tmp/oldpcr15
+mv /etc/machine-id /etc/machine-id.save
+echo 994013bf23864ee7992eab39a96dd3bb >/etc/machine-id
+SYSTEMD_FORCE_MEASURE=1 "$SD_PCREXTEND" --machine-id
+mv /etc/machine-id.save /etc/machine-id
+tpm2_pcrread sha256:15 -Q -o /tmp/newpcr15
+
+# And check it matches expectations
+diff /tmp/newpcr15 \
+     <(cat /tmp/oldpcr15 <(echo -n "machine-id:994013bf23864ee7992eab39a96dd3bb" | openssl dgst -binary -sha256) | openssl dgst -binary -sha256)
+
+# Check that the event log record was properly written
+test "$(jq --seq --slurp ".[$RECORD_COUNT].pcr" </run/log/systemd/tpm2-measure.log)" == "$(printf '\x1e15')"
+DIGEST_EXPECTED="$(echo -n "machine-id:994013bf23864ee7992eab39a96dd3bb" | openssl dgst -hex -sha256 -r)"
+DIGEST_CURRENT="$(jq --seq --slurp --raw-output ".[$RECORD_COUNT].digests[] | select(.hashAlg == \"sha256\").digest" </run/log/systemd/tpm2-measure.log) *stdin"
+test "$DIGEST_EXPECTED" == "$DIGEST_CURRENT"
+
+RECORD_COUNT=$((RECORD_COUNT + 1))
+# And similar for the boot phase measurement into PCR 11
+tpm2_pcrread sha256:11 -Q -o /tmp/oldpcr11
+# Do the equivalent of 'SYSTEMD_FORCE_MEASURE=1 "$SD_PCREXTEND" foobar' via Varlink, just to test the Varlink logic (but first we need to patch out the conditionalization...)
+mkdir -p /run/systemd/system/systemd-pcrextend.socket.d
+cat > /run/systemd/system/systemd-pcrextend.socket.d/50-no-condition.conf <<EOF
+[Unit]
+# Turn off all conditions */
+ConditionSecurity=
+EOF
+systemctl daemon-reload
+systemctl restart systemd-pcrextend.socket
+varlinkctl call /run/systemd/io.systemd.PCRExtend io.systemd.PCRExtend.Extend '{"pcr":11,"text":"foobar"}'
+tpm2_pcrread sha256:11 -Q -o /tmp/newpcr11
+
+diff /tmp/newpcr11 \
+    <(cat /tmp/oldpcr11 <(echo -n "foobar" | openssl dgst -binary -sha256) | openssl dgst -binary -sha256)
+
+# Check the event log for the 2nd new record since $RECORD_COUNT
+test "$(jq --seq --slurp ".[$RECORD_COUNT].pcr" </run/log/systemd/tpm2-measure.log)" == "$(printf '\x1e11')"
+DIGEST_EXPECTED="$(echo -n "foobar" | openssl dgst -hex -sha256 -r)"
+DIGEST_CURRENT="$(jq --seq --slurp --raw-output ".[$RECORD_COUNT].digests[] | select(.hashAlg == \"sha256\").digest" </run/log/systemd/tpm2-measure.log) *stdin"
+test "$DIGEST_EXPECTED" == "$DIGEST_CURRENT"
+
+# Measure a file system into PCR 15
+tpm2_pcrread sha256:15 -Q -o /tmp/oldpcr15
+SYSTEMD_FORCE_MEASURE=1 "$SD_PCREXTEND" --file-system=/
+# Put together the "file system word" we just sent to the TPM
+#   file-system:MOUNTPOINT:TYPE:UUID:LABEL:PART_ENTRY_UUID:PART_ENTRY_TYPE:PART_ENTRY_NAME
+ROOT_DEVICE="$(findmnt -n -o SOURCE /)"
+FS_WORD="$(lsblk -n -o MOUNTPOINT,FSTYPE,UUID,LABEL,PARTUUID,PARTTYPE,PARTLABEL "$ROOT_DEVICE" | sed -r 's/[ ]+/:/g')"
+tpm2_pcrread sha256:15 -Q -o /tmp/newpcr15
+
+# And check if it matches with the current PCR 15 state
+diff /tmp/newpcr15 \
+     <(cat /tmp/oldpcr15 <(echo -n "file-system:$FS_WORD" | openssl dgst -binary -sha256) | openssl dgst -binary -sha256)
+
+rm -f /tmp/oldpcr{11,15} /tmp/newpcr{11,15}