summaryrefslogtreecommitdiffstats
path: root/docs/CONTAINER_INTERFACE.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/CONTAINER_INTERFACE.md')
-rw-r--r--docs/CONTAINER_INTERFACE.md397
1 files changed, 397 insertions, 0 deletions
diff --git a/docs/CONTAINER_INTERFACE.md b/docs/CONTAINER_INTERFACE.md
new file mode 100644
index 0000000..7fa8558
--- /dev/null
+++ b/docs/CONTAINER_INTERFACE.md
@@ -0,0 +1,397 @@
+---
+title: Container Interface
+category: Interfaces
+layout: default
+SPDX-License-Identifier: LGPL-2.1-or-later
+---
+
+# The Container Interface
+
+Also consult [Writing Virtual Machine or Container
+Managers](https://www.freedesktop.org/wiki/Software/systemd/writing-vm-managers).
+
+systemd has a number of interfaces for interacting with container managers,
+when systemd is used inside of an OS container. If you work on a container
+manager, please consider supporting the following interfaces.
+
+## Execution Environment
+
+1. If the container manager wants to control the hostname for a container
+ running systemd it may just set it before invoking systemd, and systemd will
+ leave it unmodified when there is no hostname configured in `/etc/hostname`
+ (that file overrides whatever is pre-initialized by the container manager).
+
+2. Make sure to pre-mount `/proc/`, `/sys/`, and `/sys/fs/selinux/` before
+ invoking systemd, and mount `/sys/`, `/sys/fs/selinux/` and `/proc/sys/`
+ read-only (the latter via e.g. a read-only bind mount on itself) in order
+ to prevent the container from altering the host kernel's configuration
+ settings. (As a special exception, if your container has network namespaces
+ enabled, feel free to make `/proc/sys/net/` writable. If it also has user, ipc,
+ uts and pid namespaces enabled, the entire `/proc/sys` can be left writable).
+ systemd and various other subsystems (such as the SELinux userspace) have
+ been modified to behave accordingly when these file systems are read-only.
+ (It's OK to mount `/sys/` as `tmpfs` btw, and only mount a subset of its
+ sub-trees from the real `sysfs` to hide `/sys/firmware/`, `/sys/kernel/` and
+ so on. If you do that, make sure to mark `/sys/` read-only, as that
+ condition is what systemd looks for, and is what is considered to be the API
+ in this context.)
+
+3. Pre-mount `/dev/` as (container private) `tmpfs` for the container and bind
+ mount some suitable TTY to `/dev/console`. If this is a pty, make sure to
+ not close the controlling pty during systemd's lifetime. PID 1 will close
+ ttys, to avoid being killed by SAK. It only opens ttys for the time it
+ actually needs to print something. Also, make sure to create device nodes
+ for `/dev/null`, `/dev/zero`, `/dev/full`, `/dev/random`, `/dev/urandom`,
+ `/dev/tty`, `/dev/ptmx` in `/dev/`. It is not necessary to create `/dev/fd`
+ or `/dev/stdout`, as systemd will do that on its own. Make sure to set up a
+ `BPF_PROG_TYPE_CGROUP_DEVICE` BPF program — on cgroupv2 — or the `devices`
+ cgroup controller — on cgroupv1 — so that no other devices but these may be
+ created in the container. Note that many systemd services use
+ `PrivateDevices=`, which means that systemd will set up a private `/dev/`
+ for them for which it needs to be able to create these device nodes.
+ Dropping `CAP_MKNOD` for containers is hence generally not advisable, but
+ see below.
+
+4. `systemd-udevd` is not available in containers (and refuses to start), and
+ hence device dependencies are unavailable. The `systemd-udevd` unit files
+ will check for `/sys/` being read-only, as an indication whether device
+ management can work. Therefore make sure to mount `/sys/` read-only in the
+ container (see above). Various clients of `systemd-udevd` also check the
+ read-only state of `/sys/`, including PID 1 itself and `systemd-networkd`.
+
+5. If systemd detects it is run in a container it will spawn a single shell on
+ `/dev/console`, and not care about VTs or multiple gettys on VTs. (But see
+ `$container_ttys` below.)
+
+6. Either pre-mount all cgroup hierarchies in full into the container, or leave
+ that to systemd which will do so if they are missing. Note that it is
+ explicitly *not* OK to just mount a sub-hierarchy into the container as that
+ is incompatible with `/proc/$PID/cgroup` (which lists full paths). Also the
+ root-level cgroup directories tend to be quite different from inner
+ directories, and that distinction matters. It is OK however, to mount the
+ "upper" parts read-only of the hierarchies, and only allow write-access to
+ the cgroup sub-tree the container runs in. It's also a good idea to mount
+ all controller hierarchies with exception of `name=systemd` fully read-only
+ (this only applies to cgroupv1, of course), to protect the controllers from
+ alteration from inside the containers. Or to turn this around: only the
+ cgroup sub-tree of the container itself (on cgroupv2 in the unified
+ hierarchy, and on cgroupv1 in the `name=systemd` hierarchy) may be writable
+ to the container.
+
+7. Create the control group root of your container by either running your
+ container as a service (in case you have one container manager instance per
+ container instance) or creating one scope unit for each container instance
+ via systemd's transient unit API (in case you have one container manager
+ that manages all instances. Either way, make sure to set `Delegate=yes` in
+ it. This ensures that the unit you created will be part of all cgroup
+ controllers (or at least the ones systemd understands). The latter may also
+ be done via `systemd-machined`'s `CreateMachine()` API. Make sure to use the
+ cgroup path systemd put your process in for all operations of the container.
+ Do not add new cgroup directories to the top of the tree. This will not only
+ confuse systemd and the admin, but also prevent your implementation from
+ being "stackable".
+
+## Environment Variables
+
+1. To allow systemd (and other programs) to identify that it is executed within
+ a container, please set the `$container` environment variable for PID 1 in
+ the container to a short lowercase string identifying your
+ implementation. With this in place the `ConditionVirtualization=` setting in
+ unit files will work properly. Example: `container=lxc-libvirt`
+
+2. systemd has special support for allowing container managers to initialize
+ the UUID for `/etc/machine-id` to some manager supplied value. This is only
+ enabled if `/etc/machine-id` is empty (i.e. not yet set) at boot time of the
+ container. The container manager should set `$container_uuid` as environment
+ variable for the container's PID 1 to the container UUID. (This is similar
+ to the effect of `qemu`'s `-uuid` switch). Note that you should pass only a
+ UUID here that is actually unique (i.e. only one running container should
+ have a specific UUID), and gets changed when a container gets duplicated.
+ Also note that systemd will try to persistently store the UUID in
+ `/etc/machine-id` (if writable) when this option is used, hence you should
+ always pass the same UUID here. Keeping the externally used UUID for a
+ container and the internal one in sync is hopefully useful to minimize
+ surprise for the administrator.
+
+3. systemd can automatically spawn login gettys on additional ptys. A container
+ manager can set the `$container_ttys` environment variable for the
+ container's PID 1 to tell it on which ptys to spawn gettys. The variable
+ should take a space separated list of pty names, without the leading `/dev/`
+ prefix, but with the `pts/` prefix included. Note that despite the
+ variable's name you may only specify ptys, and not other types of ttys. Also
+ you need to specify the pty itself, a symlink will not suffice. This is
+ implemented in
+ [systemd-getty-generator(8)](https://www.freedesktop.org/software/systemd/man/systemd-getty-generator.html).
+ Note that this variable should not include the pty that `/dev/console` maps
+ to if it maps to one (see below). Example: if the container receives
+ `container_ttys=pts/7 pts/8 pts/14` it will spawn three additional login
+ gettys on ptys 7, 8, and 14.
+
+4. To allow applications to detect the OS version and other metadata of the host
+ running the container manager, if this is considered desirable, please parse
+ the host's `/etc/os-release` and set a `$container_host_<key>=<VALUE>`
+ environment variable for the ID fields described by the [os-release
+ interface](https://www.freedesktop.org/software/systemd/man/os-release.html), eg:
+ `$container_host_id=debian`
+ `$container_host_build_id=2020-06-15`
+ `$container_host_variant_id=server`
+ `$container_host_version_id=10`
+
+5. systemd supports passing immutable binary data blobs with limited size and
+ restricted access to services via the `ImportCredential=`, `LoadCredential=`
+ and `SetCredential=` settings. The same protocol may be used to pass credentials
+ from the container manager to systemd itself. The credential data should be
+ placed in some location (ideally a read-only and non-swappable file system,
+ like 'ramfs'), and the absolute path to this directory exported in the
+ `$CREDENTIALS_DIRECTORY` environment variable. If the container managers
+ does this, the credentials passed to the service manager can be propagated
+ to services via `LoadCredential=` or `ImportCredential=` (see ...). The
+ container manager can choose any path, but `/run/host/credentials` is
+ recommended.
+
+## Advanced Integration
+
+1. Consider syncing `/etc/localtime` from the host file system into the
+ container. Make it a relative symlink to the containers's zoneinfo dir, as
+ usual. Tools rely on being able to determine the timezone setting from the
+ symlink value, and making it relative looks nice even if people list the
+ container's `/etc/` from the host.
+
+2. Make the container journal available in the host, by automatically
+ symlinking the container journal directory into the host journal directory.
+ More precisely, link `/var/log/journal/<container-machine-id>` of the
+ container into the same dir of the host. Administrators can then
+ automatically browse all container journals (correctly interleaved) by
+ issuing `journalctl -m`. The container machine ID can be determined from
+ `/etc/machine-id` in the container.
+
+3. If the container manager wants to cleanly shutdown the container, it might
+ be a good idea to send `SIGRTMIN+3` to its init process. systemd will then
+ do a clean shutdown. Note however, that since only systemd understands
+ `SIGRTMIN+3` like this, this might confuse other init systems.
+
+4. To support [Socket Activated
+ Containers](https://0pointer.de/blog/projects/socket-activated-containers.html)
+ the container manager should be capable of being run as a systemd
+ service. It will then receive the sockets starting with FD 3, the number of
+ passed FDs in `$LISTEN_FDS` and its PID as `$LISTEN_PID`. It should take
+ these and pass them on to the container's init process, also setting
+ $LISTEN_FDS and `$LISTEN_PID` (basically, it can just leave the FDs and
+ `$LISTEN_FDS` untouched, but it needs to adjust `$LISTEN_PID` to the
+ container init process). That's all that's necessary to make socket
+ activation work. The protocol to hand sockets from systemd to services is
+ hence the same as from the container manager to the container systemd. For
+ further details see the explanations of
+ [sd_listen_fds(1)](https://0pointer.de/public/systemd-man/sd_listen_fds.html)
+ and the [blog story for service
+ developers](https://0pointer.de/blog/projects/socket-activation.html).
+
+5. Container managers should stay away from the cgroup hierarchy outside of the
+ unit they created for their container. That's private property of systemd,
+ and no other code should modify it.
+
+6. systemd running inside the container can report when boot-up is complete
+ using the usual `sd_notify()` protocol that is also used when a service
+ wants to tell the service manager about readiness. A container manager can
+ set the `$NOTIFY_SOCKET` environment variable to a suitable socket path to
+ make use of this functionality. (Also see information about
+ `/run/host/notify` below.)
+
+## Networking
+
+1. Inside of a container, if a `veth` link is named `host0`, `systemd-networkd`
+ running inside of the container will by default run DHCPv4, DHCPv6, and
+ IPv4LL clients on it. It is thus recommended that container managers that
+ add a `veth` link to a container name it `host0`, to get an automatically
+ configured network, with no manual setup.
+
+2. Outside of a container, if a `veth` link is prefixed "ve-", `systemd-networkd`
+ will by default run DHCPv4 and DHCPv6 servers on it, as well as IPv4LL. It
+ is thus recommended that container managers that add a `veth` link to a
+ container name the external side `ve-` + the container name.
+
+3. It is recommended to configure stable MAC addresses for container `veth`
+ devices, for example, hashed out of the container names. That way it is more
+ likely that DHCP and IPv4LL will acquire stable addresses.
+
+## The `/run/host/` Hierarchy
+
+Container managers may place certain resources the manager wants to provide to
+the container payload below the `/run/host/` hierarchy. This hierarchy should
+be mostly immutable (possibly some subdirs might be writable, but the top-level
+hierarchy — and probably most subdirs should be read-only to the
+container). Note that this hierarchy is used by various container managers, and
+care should be taken to avoid naming conflicts. `systemd` (and in particular
+`systemd-nspawn`) use the hierarchy for the following resources:
+
+1. The `/run/host/incoming/` directory mount point is configured for `MS_SLAVE`
+ mount propagation with the host, and is used as intermediary location for
+ mounts to establish in the container, for the implementation of `machinectl
+ bind`. Container payload should usually not directly interact with this
+ directory: it's used by code outside the container to insert mounts inside
+ it only, and is mostly an internal vehicle to achieve this. Other container
+ managers that want to implement similar functionality might consider using
+ the same directory.
+
+2. The `/run/host/inaccessible/` directory may be set up by the container
+ manager to include six file nodes: `reg`, `dir`, `fifo`, `sock`, `chr`,
+ `blk`. These nodes correspond with the six types of file nodes Linux knows
+ (with the exceptions of symlinks). Each node should be of the specific type
+ and have an all zero access mode, i.e. be inaccessible. The two device node
+ types should have major and minor of zero (which are unallocated devices on
+ Linux). These nodes are used as mount source for implementing the
+ `InaccessiblePath=` setting of unit files, i.e. file nodes to mask this way
+ are overmounted with these "inaccessible" inodes, guaranteeing that the file
+ node type does not change this way but the nodes still become
+ inaccessible. Note that systemd when run as PID 1 in the container payload
+ will create these nodes on its own if not passed in by the container
+ manager. However, in that case it likely lacks the privileges to create the
+ character and block devices nodes (there are fallbacks for this case).
+
+3. The `/run/host/notify` path is a good choice to place the `sd_notify()`
+ socket in, that may be used for the container's PID 1 to report to the
+ container manager when boot-up is complete. The path used for this doesn't
+ matter much as it is communicated via the `$NOTIFY_SOCKET` environment
+ variable, following the usual protocol for this, however it's suitable, and
+ recommended place for this socket in case ready notification is desired.
+
+4. The `/run/host/os-release` file contains the `/etc/os-release` file of the
+ host, i.e. may be used by the container payload to gather limited
+ information about the host environment, on top of what `uname -a` reports.
+
+5. The `/run/host/container-manager` file may be used to pass the same
+ information as the `$container` environment variable (see above), i.e. a
+ short string identifying the container manager implementation. This file
+ should be newline terminated. Passing this information via this file has the
+ benefit that payload code can easily access it, even when running
+ unprivileged without access to the container PID 1's environment block.
+
+6. The `/run/host/container-uuid` file may be used to pass the same information
+ as the `$container_uuid` environment variable (see above). This file should
+ be newline terminated.
+
+7. The `/run/host/credentials/` directory is a good place to pass credentials
+ into the container, using the `$CREDENTIALS_DIRECTORY` protocol, see above.
+
+## What You Shouldn't Do
+
+1. Do not drop `CAP_MKNOD` from the container. `PrivateDevices=` is a commonly
+ used service setting that provides a service with its own, private, minimal
+ version of `/dev/`. To set this up systemd in the container needs this
+ capability. If you take away the capability, then all services that set this
+ flag will cease to work. Use `BPF_PROG_TYPE_CGROUP_DEVICE` BPF programs — on
+ cgroupv2 — or the `devices` controller — on cgroupv1 — to restrict what
+ device nodes the container can create instead of taking away the capability
+ wholesale. (Also see the section about fully unprivileged containers below.)
+
+2. Do not drop `CAP_SYS_ADMIN` from the container. A number of the most
+ commonly used file system namespacing related settings, such as
+ `PrivateDevices=`, `ProtectHome=`, `ProtectSystem=`, `MountFlags=`,
+ `PrivateTmp=`, `ReadWriteDirectories=`, `ReadOnlyDirectories=`,
+ `InaccessibleDirectories=`, and `MountFlags=` need to be able to open new
+ mount namespaces and the mount certain file systems into them. You break all
+ services that make use of these options if you drop the capability. Also
+ note that logind mounts `XDG_RUNTIME_DIR` as `tmpfs` for all logged in users
+ and that won't work either if you take away the capability. (Also see
+ section about fully unprivileged containers below.)
+
+3. Do not cross-link `/dev/kmsg` with `/dev/console`. They are different things,
+ you cannot link them to each other.
+
+4. Do not pretend that the real VTs are available in the container. The VT
+ subsystem consists of all the devices `/dev/tty[0-9]*`, `/dev/vcs*`,
+ `/dev/vcsa*` plus their `sysfs` counterparts. They speak specific `ioctl()`s
+ and understand specific escape sequences, that other ptys don't understand.
+ Hence, it is explicitly not OK to mount a pty to `/dev/tty1`, `/dev/tty2`,
+ `/dev/tty3`. This is explicitly not supported.
+
+5. Don't pretend that passing arbitrary devices to containers could really work
+ well. For example, do not pass device nodes for block devices to the
+ container. Device access (with the exception of network devices) is not
+ virtualized on Linux. Enumeration and probing of meta information from
+ `/sys/` and elsewhere is not possible to do correctly in a container. Simply
+ adding a specific device node to a container's `/dev/` is *not* *enough* to
+ do the job, as `systemd-udevd` and suchlike are not available at all, and no
+ devices will appear available or enumerable, inside the container.
+
+6. Don't mount only a sub-tree of the `cgroupfs` into the container. This will not
+ work as `/proc/$PID/cgroup` lists full paths and cannot be matched up with
+ the actual `cgroupfs` tree visible, then. (You may "prune" some branches
+ though, see above.)
+
+7. Do not make `/sys/` writable in the container. If you do,
+ `systemd-udevd.service` is started to manage your devices — inside the
+ container, but that will cause conflicts and errors given that the Linux
+ device model is not virtualized for containers on Linux and thus the
+ containers and the host would try to manage the same devices, fighting for
+ ownership. Multiple other subsystems of systemd similarly test for `/sys/`
+ being writable to decide whether to use `systemd-udevd` or assume that
+ device management is properly available on the instance. Among them
+ `systemd-networkd` and `systemd-logind`. The conditionalization on the
+ read-only state of `/sys/` enables a nice automatism: as soon as `/sys/` and
+ the Linux device model are changed to be virtualized properly the container
+ payload can make use of that, simply by marking `/sys/` writable. (Note that
+ as special exception, the devices in `/sys/class/net/` are virtualized
+ already, if network namespacing is used. Thus it is OK to mount the relevant
+ sub-directories of `/sys/` writable, but make sure to leave the root of
+ `/sys/` read-only.)
+
+8. Do not pass the `CAP_AUDIT_CONTROL`, `CAP_AUDIT_READ`, `CAP_AUDIT_WRITE`
+ capabilities to the container, in particular not to those making use of user
+ namespaces. The kernel's audit subsystem is still not virtualized for
+ containers, and passing these credentials is pointless hence, given the
+ actual attempt to make use of the audit subsystem will fail. Note that
+ systemd's audit support is partially conditioned on these capabilities, thus
+ by dropping them you ensure that you get an entirely clean boot, as systemd
+ will make no attempt to use it. If you pass the capabilities to the payload
+ systemd will assume that audit is available and works, and some components
+ will subsequently fail in various ways. Note that once the kernel learnt
+ native support for container-virtualized audit, adding the capability to the
+ container description will automatically make the container payload use it.
+
+## Fully Unprivileged Container Payload
+
+First things first, to make this clear: Linux containers are not a security
+technology right now. There are more holes in the model than in swiss cheese.
+
+For example: if you do not use user namespacing, and share root and other users
+between container and host, the `struct user` structures will be shared between
+host and container, and hence `RLIMIT_NPROC` and so of the container users
+affect the host and other containers, and vice versa. This is a major security
+hole, and actually is a real-life problem: since Avahi sets `RLIMIT_NPROC` of
+its user to 2 (to effectively disallow `fork()`ing) you cannot run more than
+one Avahi instance on the entire system...
+
+People have been asking to be able to run systemd without `CAP_SYS_ADMIN` and
+`CAP_SYS_MKNOD` in the container. This is now supported to some level in
+systemd, but we recommend against it (see above). If `CAP_SYS_ADMIN` and
+`CAP_SYS_MKNOD` are missing from the container systemd will now gracefully turn
+off `PrivateTmp=`, `PrivateNetwork=`, `ProtectHome=`, `ProtectSystem=` and
+others, because those capabilities are required to implement these options. The
+services using these settings (which include many of systemd's own) will hence
+run in a different, less secure environment when the capabilities are missing
+than with them around.
+
+With user namespacing in place things get much better. With user namespaces the
+`struct user` issue described above goes away, and containers can keep
+`CAP_SYS_ADMIN` safely for the user namespace, as capabilities are virtualized
+and having capabilities inside a container doesn't mean one also has them
+outside.
+
+## Final Words
+
+If you write software that wants to detect whether it is run in a container,
+please check `/proc/1/environ` and look for the `container=` environment
+variable. Do not assume the environment variable is inherited down the process
+tree. It generally is not. Hence check the environment block of PID 1, not your
+own. Note though that this file is only accessible to root. systemd hence early
+on also copies the value into `/run/systemd/container`, which is readable for
+everybody. However, that's a systemd-specific interface and other init systems
+are unlikely to do the same.
+
+Note that it is our intention to make systemd systems work flawlessly and
+out-of-the-box in containers. In fact, we are interested to ensure that the same
+OS image can be booted on a bare system, in a VM and in a container, and behave
+correctly each time. If you notice that some component in systemd does not work
+in a container as it should, even though the container manager implements
+everything documented above, please contact us.