diff options
Diffstat (limited to 'docs/TRANSIENT-SETTINGS.md')
| -rw-r--r-- | docs/TRANSIENT-SETTINGS.md | 511 |
1 files changed, 511 insertions, 0 deletions
diff --git a/docs/TRANSIENT-SETTINGS.md b/docs/TRANSIENT-SETTINGS.md new file mode 100644 index 0000000..15f1cbc --- /dev/null +++ b/docs/TRANSIENT-SETTINGS.md @@ -0,0 +1,511 @@ +--- +title: What Settings Are Currently Available For Transient Units? +category: Interfaces +layout: default +SPDX-License-Identifier: LGPL-2.1-or-later +--- + +# What Settings Are Currently Available For Transient Units? + +Our intention is to make all settings that are available as unit file settings +also available for transient units, through the D-Bus API. At the moment, +device, swap, and target units are not supported at all as transient units, but +others are pretty well supported. + +The lists below contain all settings currently available in unit files. The +ones currently available in transient units are prefixed with `✓`. + +## Generic Unit Settings + +Most generic unit settings are available for transient units. + +``` +✓ Description= +✓ Documentation= +✓ SourcePath= +✓ Requires= +✓ Requisite= +✓ Wants= +✓ BindsTo= +✓ Conflicts= +✓ Before= +✓ After= +✓ OnFailure= +✓ PropagatesReloadTo= +✓ ReloadPropagatedFrom= +✓ PartOf= +✓ Upholds= +✓ JoinsNamespaceOf= +✓ RequiresMountsFor= +✓ StopWhenUnneeded= +✓ RefuseManualStart= +✓ RefuseManualStop= +✓ AllowIsolate= +✓ DefaultDependencies= +✓ OnFailureJobMode= +✓ IgnoreOnIsolate= +✓ JobTimeoutSec= +✓ JobRunningTimeoutSec= +✓ JobTimeoutAction= +✓ JobTimeoutRebootArgument= +✓ StartLimitIntervalSec= +✓ StartLimitBurst= +✓ StartLimitAction= +✓ FailureAction= +✓ SuccessAction= +✓ FailureActionExitStatus= +✓ SuccessActionExitStatus= +✓ RebootArgument= +✓ ConditionPathExists= +✓ ConditionPathExistsGlob= +✓ ConditionPathIsDirectory= +✓ ConditionPathIsSymbolicLink= +✓ ConditionPathIsMountPoint= +✓ ConditionPathIsReadWrite= +✓ ConditionDirectoryNotEmpty= +✓ ConditionFileNotEmpty= +✓ ConditionFileIsExecutable= +✓ ConditionNeedsUpdate= +✓ ConditionFirstBoot= +✓ ConditionKernelCommandLine= +✓ ConditionKernelVersion= +✓ ConditionArchitecture= +✓ ConditionFirmware= +✓ ConditionVirtualization= +✓ ConditionSecurity= +✓ ConditionCapability= +✓ ConditionHost= +✓ ConditionACPower= +✓ ConditionUser= +✓ ConditionGroup= +✓ ConditionControlGroupController= +✓ AssertPathExists= +✓ AssertPathExistsGlob= +✓ AssertPathIsDirectory= +✓ AssertPathIsSymbolicLink= +✓ AssertPathIsMountPoint= +✓ AssertPathIsReadWrite= +✓ AssertDirectoryNotEmpty= +✓ AssertFileNotEmpty= +✓ AssertFileIsExecutable= +✓ AssertNeedsUpdate= +✓ AssertFirstBoot= +✓ AssertKernelCommandLine= +✓ AssertKernelVersion= +✓ AssertArchitecture= +✓ AssertVirtualization= +✓ AssertSecurity= +✓ AssertCapability= +✓ AssertHost= +✓ AssertACPower= +✓ AssertUser= +✓ AssertGroup= +✓ AssertControlGroupController= +✓ CollectMode= +``` + +## Execution-Related Settings + +All execution-related settings are available for transient units. + +``` +✓ WorkingDirectory= +✓ RootDirectory= +✓ RootImage= +✓ User= +✓ Group= +✓ SupplementaryGroups= +✓ Nice= +✓ OOMScoreAdjust= +✓ CoredumpFilter= +✓ IOSchedulingClass= +✓ IOSchedulingPriority= +✓ CPUSchedulingPolicy= +✓ CPUSchedulingPriority= +✓ CPUSchedulingResetOnFork= +✓ CPUAffinity= +✓ UMask= +✓ Environment= +✓ EnvironmentFile= +✓ PassEnvironment= +✓ UnsetEnvironment= +✓ DynamicUser= +✓ RemoveIPC= +✓ StandardInput= +✓ StandardOutput= +✓ StandardError= +✓ StandardInputText= +✓ StandardInputData= +✓ TTYPath= +✓ TTYReset= +✓ TTYVHangup= +✓ TTYVTDisallocate= +✓ TTYRows= +✓ TTYColumns= +✓ SyslogIdentifier= +✓ SyslogFacility= +✓ SyslogLevel= +✓ SyslogLevelPrefix= +✓ LogLevelMax= +✓ LogExtraFields= +✓ LogFilterPatterns= +✓ LogRateLimitIntervalSec= +✓ LogRateLimitBurst= +✓ SecureBits= +✓ CapabilityBoundingSet= +✓ AmbientCapabilities= +✓ TimerSlackNSec= +✓ NoNewPrivileges= +✓ KeyringMode= +✓ ProtectProc= +✓ ProcSubset= +✓ SystemCallFilter= +✓ SystemCallArchitectures= +✓ SystemCallErrorNumber= +✓ SystemCallLog= +✓ MemoryDenyWriteExecute= +✓ RestrictNamespaces= +✓ RestrictRealtime= +✓ RestrictSUIDSGID= +✓ RestrictAddressFamilies= +✓ RootHash= +✓ RootHashSignature= +✓ RootVerity= +✓ LockPersonality= +✓ LimitCPU= +✓ LimitFSIZE= +✓ LimitDATA= +✓ LimitSTACK= +✓ LimitCORE= +✓ LimitRSS= +✓ LimitNOFILE= +✓ LimitAS= +✓ LimitNPROC= +✓ LimitMEMLOCK= +✓ LimitLOCKS= +✓ LimitSIGPENDING= +✓ LimitMSGQUEUE= +✓ LimitNICE= +✓ LimitRTPRIO= +✓ LimitRTTIME= +✓ ReadWritePaths= +✓ ReadOnlyPaths= +✓ InaccessiblePaths= +✓ BindPaths= +✓ BindReadOnlyPaths= +✓ TemporaryFileSystem= +✓ PrivateTmp= +✓ PrivateDevices= +✓ PrivateMounts= +✓ ProtectKernelTunables= +✓ ProtectKernelModules= +✓ ProtectKernelLogs= +✓ ProtectControlGroups= +✓ PrivateNetwork= +✓ PrivateUsers= +✓ ProtectSystem= +✓ ProtectHome= +✓ ProtectClock= +✓ MountFlags= +✓ MountAPIVFS= +✓ Personality= +✓ RuntimeDirectoryPreserve= +✓ RuntimeDirectoryMode= +✓ RuntimeDirectory= +✓ StateDirectoryMode= +✓ StateDirectory= +✓ CacheDirectoryMode= +✓ CacheDirectory= +✓ LogsDirectoryMode= +✓ LogsDirectory= +✓ ConfigurationDirectoryMode= +✓ ConfigurationDirectory= +✓ PAMName= +✓ IgnoreSIGPIPE= +✓ UtmpIdentifier= +✓ UtmpMode= +✓ SELinuxContext= +✓ SmackProcessLabel= +✓ AppArmorProfile= +✓ Slice= +``` + +## Resource Control Settings + +All cgroup/resource control settings are available for transient units + +``` +✓ CPUAccounting= +✓ CPUWeight= +✓ StartupCPUWeight= +✓ CPUShares= +✓ StartupCPUShares= +✓ CPUQuota= +✓ CPUQuotaPeriodSec= +✓ AllowedCPUs= +✓ StartupAllowedCPUs= +✓ AllowedMemoryNodes= +✓ StartupAllowedMemoryNodes= +✓ MemoryAccounting= +✓ DefaultMemoryMin= +✓ MemoryMin= +✓ DefaultMemoryLow= +✓ MemoryLow= +✓ MemoryHigh= +✓ MemoryMax= +✓ MemorySwapMax= +✓ MemoryLimit= +✓ DeviceAllow= +✓ DevicePolicy= +✓ IOAccounting= +✓ IOWeight= +✓ StartupIOWeight= +✓ IODeviceWeight= +✓ IOReadBandwidthMax= +✓ IOWriteBandwidthMax= +✓ IOReadIOPSMax= +✓ IOWriteIOPSMax= +✓ BlockIOAccounting= +✓ BlockIOWeight= +✓ StartupBlockIOWeight= +✓ BlockIODeviceWeight= +✓ BlockIOReadBandwidth= +✓ BlockIOWriteBandwidth= +✓ TasksAccounting= +✓ TasksMax= +✓ Delegate= +✓ DisableControllers= +✓ IPAccounting= +✓ IPAddressAllow= +✓ IPAddressDeny= +✓ ManagedOOMSwap= +✓ ManagedOOMMemoryPressure= +✓ ManagedOOMMemoryPressureLimit= +✓ ManagedOOMPreference= +✓ CoredumpReceive= +``` + +## Process Killing Settings + +All process killing settings are available for transient units: + +``` +✓ SendSIGKILL= +✓ SendSIGHUP= +✓ KillMode= +✓ KillSignal= +✓ RestartKillSignal= +✓ FinalKillSignal= +✓ WatchdogSignal= +``` + +## Service Unit Settings + +Most service unit settings are available for transient units. + +``` +✓ BusName= +✓ ExecCondition= +✓ ExecReload= +✓ ExecStart= +✓ ExecStartPost= +✓ ExecStartPre= +✓ ExecStop= +✓ ExecStopPost= +✓ ExitType= +✓ FileDescriptorStoreMax= +✓ GuessMainPID= +✓ NonBlocking= +✓ NotifyAccess= +✓ OOMPolicy= +✓ PIDFile= +✓ RemainAfterExit= +✓ Restart= +✓ RestartForceExitStatus= +✓ RestartPreventExitStatus= +✓ RestartSec= +✓ RootDirectoryStartOnly= +✓ RuntimeMaxSec= +✓ RuntimeRandomizedExtraSec= + Sockets= +✓ SuccessExitStatus= +✓ TimeoutAbortSec= +✓ TimeoutSec= +✓ TimeoutStartFailureMode= +✓ TimeoutStartSec= +✓ TimeoutStopFailureMode= +✓ TimeoutStopSec= +✓ Type= +✓ USBFunctionDescriptors= +✓ USBFunctionStrings= +✓ WatchdogSec= +``` + +## Mount Unit Settings + +All mount unit settings are available to transient units: + +``` +✓ What= +✓ Where= +✓ Options= +✓ Type= +✓ TimeoutSec= +✓ DirectoryMode= +✓ SloppyOptions= +✓ LazyUnmount= +✓ ForceUnmount= +✓ ReadWriteOnly= +``` + +## Automount Unit Settings + +All automount unit setting is available to transient units: + +``` +✓ Where= +✓ DirectoryMode= +✓ TimeoutIdleSec= +``` + +## Timer Unit Settings + +Most timer unit settings are available to transient units. + +``` +✓ OnActiveSec= +✓ OnBootSec= +✓ OnCalendar= +✓ OnClockChange= +✓ OnStartupSec= +✓ OnTimezoneChange= +✓ OnUnitActiveSec= +✓ OnUnitInactiveSec= +✓ Persistent= +✓ WakeSystem= +✓ RemainAfterElapse= +✓ AccuracySec= +✓ RandomizedDelaySec= +✓ FixedRandomDelay= + Unit= +``` + +## Slice Unit Settings + +Slice units are fully supported as transient units, but they have no settings +of their own beyond the generic unit and resource control settings. + +## Scope Unit Settings + +Scope units are fully supported as transient units (in fact they only exist as +such). + +``` +✓ RuntimeMaxSec= +✓ RuntimeRandomizedExtraSec= +✓ TimeoutStopSec= +``` + +## Socket Unit Settings + +Most socket unit settings are available to transient units. + +``` +✓ ListenStream= +✓ ListenDatagram= +✓ ListenSequentialPacket= +✓ ListenFIFO= +✓ ListenNetlink= +✓ ListenSpecial= +✓ ListenMessageQueue= +✓ ListenUSBFunction= +✓ SocketProtocol= +✓ BindIPv6Only= +✓ Backlog= +✓ BindToDevice= +✓ ExecStartPre= +✓ ExecStartPost= +✓ ExecStopPre= +✓ ExecStopPost= +✓ TimeoutSec= +✓ SocketUser= +✓ SocketGroup= +✓ SocketMode= +✓ DirectoryMode= +✓ Accept= +✓ FlushPending= +✓ Writable= +✓ MaxConnections= +✓ MaxConnectionsPerSource= +✓ KeepAlive= +✓ KeepAliveTimeSec= +✓ KeepAliveIntervalSec= +✓ KeepAliveProbes= +✓ DeferAcceptSec= +✓ NoDelay= +✓ Priority= +✓ ReceiveBuffer= +✓ SendBuffer= +✓ IPTOS= +✓ IPTTL= +✓ Mark= +✓ PipeSize= +✓ FreeBind= +✓ Transparent= +✓ Broadcast= +✓ PassCredentials= +✓ PassSecurity= +✓ PassPacketInfo= +✓ TCPCongestion= +✓ ReusePort= +✓ MessageQueueMaxMessages= +✓ MessageQueueMessageSize= +✓ RemoveOnStop= +✓ Symlinks= +✓ FileDescriptorName= + Service= +✓ TriggerLimitIntervalSec= +✓ TriggerLimitBurst= +✓ SmackLabel= +✓ SmackLabelIPIn= +✓ SmackLabelIPOut= +✓ SELinuxContextFromNet= +``` + +## Swap Unit Settings + +Swap units are currently not available at all as transient units: + +``` + What= + Priority= + Options= + TimeoutSec= +``` + +## Path Unit Settings + +Most path unit settings are available to transient units. + +``` +✓ PathExists= +✓ PathExistsGlob= +✓ PathChanged= +✓ PathModified= +✓ DirectoryNotEmpty= + Unit= +✓ MakeDirectory= +✓ DirectoryMode= +``` + +## Install Section + +The `[Install]` section is currently not available at all for transient units, and it probably doesn't even make sense. + +``` + Alias= + WantedBy= + RequiredBy= + Also= + DefaultInstance= +``` |