summaryrefslogtreecommitdiffstats
path: root/man/org.freedesktop.resolve1.xml
diff options
context:
space:
mode:
Diffstat (limited to 'man/org.freedesktop.resolve1.xml')
-rw-r--r--man/org.freedesktop.resolve1.xml922
1 files changed, 922 insertions, 0 deletions
diff --git a/man/org.freedesktop.resolve1.xml b/man/org.freedesktop.resolve1.xml
new file mode 100644
index 0000000..f9cba4f
--- /dev/null
+++ b/man/org.freedesktop.resolve1.xml
@@ -0,0 +1,922 @@
+<?xml version="1.0"?>
+<!--*-nxml-*-->
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
+<!ENTITY % entities SYSTEM "custom-entities.ent" >
+%entities;
+]>
+<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
+
+<refentry id="org.freedesktop.resolve1" conditional='ENABLE_RESOLVE'
+ xmlns:xi="http://www.w3.org/2001/XInclude">
+ <refentryinfo>
+ <title>org.freedesktop.resolve1</title>
+ <productname>systemd</productname>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>org.freedesktop.resolve1</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </refmeta>
+
+ <refnamediv>
+ <refname>org.freedesktop.resolve1</refname>
+ <refpurpose>The D-Bus interface of systemd-resolved</refpurpose>
+ </refnamediv>
+
+ <refsect1>
+ <title>Introduction</title>
+
+ <para>
+ <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ is a system service that provides hostname resolution and caching using DNS, LLMNR, and mDNS. It also
+ does DNSSEC validation. This page describes the resolve semantics and the D-Bus interface.</para>
+
+ <para>This page contains an API reference only. If you are looking for a longer explanation how to use
+ this API, please consult
+ <ulink url="https://wiki.freedesktop.org/www/Software/systemd/writing-network-configuration-managers">
+ Writing Network Configuration Managers</ulink> and
+ <ulink url="https://wiki.freedesktop.org/www/Software/systemd/writing-resolver-clients">Writing Resolver
+ Clients</ulink>.
+ </para>
+ </refsect1>
+
+ <refsect1>
+ <title>The Manager Object</title>
+
+ <para>The service exposes the following interfaces on the Manager object on the bus:</para>
+
+ <programlisting executable="systemd-resolved" node="/org/freedesktop/resolve1" interface="org.freedesktop.resolve1.Manager">
+node /org/freedesktop/resolve1 {
+ interface org.freedesktop.resolve1.Manager {
+ methods:
+ ResolveHostname(in i ifindex,
+ in s name,
+ in i family,
+ in t flags,
+ out a(iiay) addresses,
+ out s canonical,
+ out t flags);
+ ResolveAddress(in i ifindex,
+ in i family,
+ in ay address,
+ in t flags,
+ out a(is) names,
+ out t flags);
+ ResolveRecord(in i ifindex,
+ in s name,
+ in q class,
+ in q type,
+ in t flags,
+ out a(iqqay) records,
+ out t flags);
+ ResolveService(in i ifindex,
+ in s name,
+ in s type,
+ in s domain,
+ in i family,
+ in t flags,
+ out a(qqqsa(iiay)s) srv_data,
+ out aay txt_data,
+ out s canonical_name,
+ out s canonical_type,
+ out s canonical_domain,
+ out t flags);
+ GetLink(in i ifindex,
+ out o path);
+ SetLinkDNS(in i ifindex,
+ in a(iay) addresses);
+ SetLinkDNSEx(in i ifindex,
+ in a(iayqs) addresses);
+ SetLinkDomains(in i ifindex,
+ in a(sb) domains);
+ SetLinkDefaultRoute(in i ifindex,
+ in b enable);
+ SetLinkLLMNR(in i ifindex,
+ in s mode);
+ SetLinkMulticastDNS(in i ifindex,
+ in s mode);
+ SetLinkDNSOverTLS(in i ifindex,
+ in s mode);
+ SetLinkDNSSEC(in i ifindex,
+ in s mode);
+ SetLinkDNSSECNegativeTrustAnchors(in i ifindex,
+ in as names);
+ RevertLink(in i ifindex);
+ RegisterService(in s name,
+ in s name_template,
+ in s type,
+ in q service_port,
+ in q service_priority,
+ in q service_weight,
+ in aa{say} txt_datas,
+ out o service_path);
+ UnregisterService(in o service_path);
+ ResetStatistics();
+ FlushCaches();
+ ResetServerFeatures();
+ properties:
+ readonly s LLMNRHostname = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s LLMNR = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s MulticastDNS = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s DNSOverTLS = '...';
+ readonly a(iiay) DNS = [...];
+ readonly a(iiayqs) DNSEx = [...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("const")
+ readonly a(iiay) FallbackDNS = [...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("const")
+ readonly a(iiayqs) FallbackDNSEx = [...];
+ readonly (iiay) CurrentDNSServer = ...;
+ readonly (iiayqs) CurrentDNSServerEx = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly a(isb) Domains = [...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly (tt) TransactionStatistics = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly (ttt) CacheStatistics = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s DNSSEC = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly (tttt) DNSSECStatistics = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly b DNSSECSupported = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly as DNSSECNegativeTrustAnchors = ['...', ...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s DNSStubListener = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s ResolvConfMode = '...';
+ };
+ interface org.freedesktop.DBus.Peer { ... };
+ interface org.freedesktop.DBus.Introspectable { ... };
+ interface org.freedesktop.DBus.Properties { ... };
+};
+ </programlisting>
+
+ <!--method RegisterService is not documented!-->
+
+ <!--method UnregisterService is not documented!-->
+
+ <!--method FlushCaches is not documented!-->
+
+ <!--method ResetServerFeatures is not documented!-->
+
+ <!--property DNSSECNegativeTrustAnchors is not documented!-->
+
+ <!--Autogenerated cross-references for systemd.directives, do not edit-->
+
+ <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.resolve1.Manager"/>
+
+ <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.resolve1.Manager"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="ResolveHostname()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="ResolveAddress()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="ResolveRecord()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="ResolveService()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="GetLink()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkDNS()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkDNSEx()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkDomains()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkDefaultRoute()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkLLMNR()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkMulticastDNS()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkDNSOverTLS()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkDNSSEC()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLinkDNSSECNegativeTrustAnchors()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="RevertLink()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="RegisterService()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="UnregisterService()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="ResetStatistics()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="FlushCaches()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="ResetServerFeatures()"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="LLMNRHostname"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="LLMNR"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="MulticastDNS"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSOverTLS"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNS"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSEx"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="FallbackDNS"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="FallbackDNSEx"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="CurrentDNSServer"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="CurrentDNSServerEx"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="Domains"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="TransactionStatistics"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="CacheStatistics"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSSEC"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSSECStatistics"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSSECSupported"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSSECNegativeTrustAnchors"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSStubListener"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="ResolvConfMode"/>
+
+ <!--End of Autogenerated section-->
+
+ <refsect2>
+ <title>Methods</title>
+
+ <para><function>ResolveHostname()</function> takes a hostname and resolves it to one or more IP
+ addresses. As parameters it takes the Linux network interface index to execute the query on, or 0 if
+ it may be done on any suitable interface. The <varname>name</varname> parameter specifies the hostname
+ to resolve. Note that if required, IDNA conversion is applied to this name unless it is resolved via
+ LLMNR or MulticastDNS. The <varname>family</varname> parameter limits the results to a specific address
+ family. It may be <constant>AF_INET</constant>, <constant>AF_INET6</constant> or
+ <constant>AF_UNSPEC</constant>. If <constant>AF_UNSPEC</constant> is specified (recommended), both
+ kinds are retrieved, subject to local network configuration (i.e. if no local, routable IPv6 address is
+ found, no IPv6 address is retrieved; and similarly for IPv4). A 64-bit <varname>flags</varname> field
+ may be used to alter the behaviour of the resolver operation (see below). The method returns an array
+ of address records. Each address record consists of the interface index the address belongs to, an
+ address family as well as a byte array with the actual IP address data (which either has 4 or 16
+ elements, depending on the address family). The returned address family will be one of
+ <constant>AF_INET</constant> or <constant>AF_INET6</constant>. For IPv6, the returned address interface
+ index should be used to initialize the .sin6_scope_id field of a
+ <structname>struct sockaddr_in6</structname> instance to permit support for resolution to link-local IP
+ addresses. The address array is followed by the canonical name of the host, which may or may not be
+ identical to the resolved hostname. Finally, a 64-bit <varname>flags</varname> field is returned that
+ is defined similarly to the <varname>flags</varname> field that was passed in, but contains information
+ about the resolved data (see below). If the hostname passed in is an IPv4 or IPv6 address formatted as
+ string, it is parsed, and the result is returned. In this case, no network communication is
+ done.</para>
+
+ <para><function>ResolveAddress()</function> executes the reverse operation: it takes an IP address and
+ acquires one or more hostnames for it. As parameters it takes the interface index to execute the query
+ on, or <constant>0</constant> if all suitable interfaces are OK. The <varname>family</varname>
+ parameter indicates the address family of the IP address to resolve. It may be either
+ <constant>AF_INET</constant> or <constant>AF_INET6</constant>. The <varname>address</varname> parameter
+ takes the raw IP address data (as either a 4 or 16 byte array). The <varname>flags</varname> input
+ parameter may be used to alter the resolver operation (see below). The method returns an array of name
+ records, each consisting of an interface index and a hostname. The <varname>flags</varname> output
+ field contains additional information about the resolver operation (see below).</para>
+
+ <para><function>ResolveRecord()</function> takes a DNS resource record (RR) type, class and name, and
+ retrieves the full resource record set (RRset), including the RDATA, for it. As parameter it takes the
+ Linux network interface index to execute the query on, or <constant>0</constant> if it may be done on
+ any suitable interface. The <varname>name</varname> parameter specifies the RR domain name to look up
+ (no IDNA conversion is applied), followed by the 16-bit class and type fields (which may be
+ ANY). Finally, a <varname>flags</varname> field may be passed in to alter behaviour of the look-up (see
+ below). On completion, an array of RR items is returned. Each array entry consists of the network interface
+ index the RR was discovered on, the type and class field of the RR found, and a byte array of the raw
+ RR discovered. The raw RR data starts with the RR's domain name, in the original casing, followed
+ by the RR type, class, TTL and RDATA, in the binary format documented in
+ <ulink url="https://www.ietf.org/rfc/rfc1035.txt">RFC 1035</ulink>. For RRs that support name
+ compression in the payload (such as MX or PTR), the compression is expanded in the returned
+ data.</para>
+
+ <para>Note that currently, the class field has to be specified as IN or ANY. Specifying a different
+ class will return an error indicating that look-ups of this kind are unsupported. Similarly, some
+ special types are not supported either (AXFR, OPT, …). While <filename>systemd-resolved</filename> parses and validates resource
+ records of many types, it is crucial that clients using this API understand that the RR data originates
+ from the network and should be thoroughly validated before use.</para>
+
+ <para><function>ResolveService()</function> may be used to resolve a DNS
+ <constant class="dns">SRV</constant> service record, as well as the hostnames referenced in it, and
+ possibly an accompanying DNS-SD <constant class="dns">TXT</constant> record containing additional
+ service metadata. The primary benefit of using this method over <function>ResolveRecord()</function>
+ specifying the <constant class="dns">SRV</constant> type is that it will resolve the
+ <constant class="dns">SRV</constant> and <constant class="dns">TXT</constant> RRs as well as the
+ hostnames referenced in the SRV in a single operation. As parameters it takes a Linux network interface
+ index, a service name, a service type and a service domain. This method may be invoked in three
+ different modes:</para>
+
+ <orderedlist>
+ <listitem><para>To resolve a DNS-SD service, specify the service name (e.g. <literal>Lennart's
+ Files</literal>), the service type (e.g. <literal>_webdav._tcp</literal>) and the domain to search in
+ (e.g. <literal>local</literal>) as the three service parameters. The service name must be in UTF-8
+ format, and no IDNA conversion is applied to it in this mode (as mandated by the DNS-SD
+ specifications). However, if necessary, IDNA conversion is applied to the domain parameter.</para>
+ </listitem>
+
+ <listitem><para>To resolve a plain <constant class="dns">SRV</constant> record, set the service name
+ parameter to the empty string and set the service type and domain properly. (IDNA conversion is
+ applied to the domain, if necessary.)</para></listitem>
+
+ <listitem><para>Alternatively, leave both the service name and type empty and specify the full domain
+ name of the <constant class="dns">SRV</constant> record (i.e. prefixed with the service type) in the
+ domain parameter. (No IDNA conversion is applied in this mode.)</para></listitem>
+ </orderedlist>
+
+ <para>The <varname>family</varname> parameter of the <function>ResolveService()</function> method encodes
+ the desired family of the addresses to resolve (use <constant>AF_INET</constant>,
+ <constant>AF_INET6</constant>, or <constant>AF_UNSPEC</constant>). If this is enabled (Use the
+ <constant>NO_ADDRESS</constant> flag to turn address resolution off, see below). The
+ <varname>flags</varname> parameter takes a couple of flags that may be used to alter the resolver
+ operation.</para>
+
+ <para>On completion, <function>ResolveService()</function> returns an array of
+ <constant class="dns">SRV</constant> record structures. Each items consisting of the priority, weight and port
+ fields as well as the hostname to contact, as encoded in the <constant class="dns">SRV</constant>
+ record. Immediately following is an array of the addresses of this hostname, with each item consisting
+ of the interface index, the address family and the address data in a byte array. This address array is
+ followed by the canonicalized hostname. After this array of <constant class="dns">SRV</constant> record
+ structures an array of byte arrays follows that encodes the TXT RR strings, in case DNS-SD look-ups are
+ enabled. The next parameters are the canonical service name, type and domain. This may or may not be
+ identical to the parameters passed in. Finally, a <varname>flags</varname> field is returned that
+ contains information about the resolver operation performed.</para>
+
+ <para>The <function>ResetStatistics()</function> method resets the various statistics counters that
+ <filename>systemd-resolved</filename> maintains to zero. (For details, see the statistics properties below.)</para>
+
+ <para>The <function>GetLink()</function> method takes a network interface index and returns the object
+ path to the <interfacename>org.freedesktop.resolve1.Link</interfacename> object corresponding to it.
+ </para>
+
+ <para>The <function>SetLinkDNS()</function> method sets the DNS servers to use on a specific
+ interface. This method (and the following ones) may be used by network management software to configure
+ per-interface DNS settings. It takes a network interface index as well as an array of DNS server IP
+ address records. Each array item consists of an address family (either <constant>AF_INET</constant> or
+ <constant>AF_INET6</constant>), followed by a 4-byte or 16-byte array with the raw address data. This
+ method is a one-step shortcut for retrieving the Link object for a network interface using
+ <function>GetLink()</function> (see above) and then invoking the <function>SetDNS()</function> method
+ (see below) on it.</para>
+
+ <para><function>SetLinkDNSEx()</function> is similar to <function>SetLinkDNS()</function>, but allows
+ an IP port (instead of the default 53) and DNS name to be specified for each DNS server. The server
+ name is used for Server Name Indication (SNI), which is useful when DNS-over-TLS is
+ used. C.f. <varname>DNS=</varname> in
+ <citerefentry><refentrytitle>resolved.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ </para>
+
+ <para><function>SetLinkDefaultRoute()</function> specifies whether the link shall be used as the
+ default route for name queries. See the description of name routing in
+ <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ for details.</para>
+
+ <para>The <function>SetLinkDomains()</function> method sets the search and routing domains to use on a
+ specific network interface for DNS look-ups. It takes a network interface index and an array of domains,
+ each with a boolean parameter indicating whether the specified domain shall be used as a search domain
+ (false), or just as a routing domain (true). Search domains are used for qualifying single-label names into
+ FQDN when looking up hostnames, as well as for making routing decisions on which interface to send
+ queries ending in the domain to. Routing domains are only used for routing decisions and not used for single-label
+ name qualification. Pass the search domains in the order they should be used.</para>
+
+ <para>The <function>SetLinkLLMNR()</function> method enables or disables LLMNR support on a specific
+ network interface. It takes a network interface index as well as a string that may either be empty or one of
+ <literal>yes</literal>, <literal>no</literal> or <literal>resolve</literal>. If empty, the systemd-wide
+ default LLMNR setting is used. If <literal>yes</literal>, LLMNR is used for resolution of single-label
+ names and the local hostname is registered on all local LANs for LLMNR resolution by peers. If
+ <literal>no</literal>, LLMNR is turned off fully on this interface. If <literal>resolve</literal>, LLMNR
+ is only enabled for resolving names, but the local hostname is not registered for other peers to
+ use.</para>
+
+ <para>Similarly, the <function>SetLinkMulticastDNS()</function> method enables or disables MulticastDNS
+ support on a specific interface. It takes the same parameters as <function>SetLinkLLMNR()</function>
+ described above.</para>
+
+ <para>The <function>SetLinkDNSSEC()</function> method enables or disables DNSSEC validation on a
+ specific network interface. It takes a network interface index as well as a string that may either be
+ empty or one of <literal>yes</literal>, <literal>no</literal>, or <literal>allow-downgrade</literal>. When
+ empty, the system-wide default DNSSEC setting is used. If <literal>yes</literal>, full DNSSEC validation
+ is done for all look-ups. If the selected DNS server does not support DNSSEC, look-ups will fail if this
+ mode is used. If <literal>no</literal>, DNSSEC validation is fully disabled. If
+ <literal>allow-downgrade</literal>, DNSSEC validation is enabled, but is turned off automatically if the
+ selected server does not support it (thus opening up behaviour to downgrade attacks). Note that DNSSEC
+ only applies to traditional DNS, not to LLMNR or MulticastDNS.</para>
+
+ <para>The <function>SetLinkDNSSECNegativeTrustAnchors()</function> method may be used to configure DNSSEC
+ Negative Trust Anchors (NTAs) for a specific network interface. It takes a network interface index and a
+ list of domains as arguments.</para>
+
+ <para>The <function>SetLinkDNSOverTLS()</function> method enables or disables DNS-over-TLS.
+ C.f. <varname>DNSOverTLS=</varname> in
+ <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ for details.</para>
+
+ <para>Network management software integrating with <filename>systemd-resolved</filename> should call
+ <function>SetLinkDNS()</function> or <function>SetLinkDNSEx()</function>,
+ <function>SetLinkDefaultRoute()</function>, <function>SetLinkDomains()</function> and others after the
+ interface appeared in the kernel (and thus after a network interface index has been assigned), but
+ before the network interfaces is activated (<constant>IFF_UP</constant> set) so that all settings take
+ effect during the full time the network interface is up. It is safe to alter settings while the
+ interface is up, however. Use <function>RevertLink()</function> (described below) to reset all
+ per-interface settings.</para>
+
+ <para>The <function>RevertLink()</function> method may be used to revert all per-link settings
+ described above to the defaults.</para>
+
+ <refsect3>
+ <title>The Flags Parameter</title>
+
+ <para>The four methods above accept and return a 64-bit flags value. In most cases passing 0 is sufficient
+ and recommended. However, the following flags are defined to alter the look-up:</para>
+
+ <programlisting>/* Input+Output: Protocol/scope */
+#define SD_RESOLVED_DNS (UINT64_C(1) &lt;&lt; 0)
+#define SD_RESOLVED_LLMNR_IPV4 (UINT64_C(1) &lt;&lt; 1)
+#define SD_RESOLVED_LLMNR_IPV6 (UINT64_C(1) &lt;&lt; 2)
+#define SD_RESOLVED_MDNS_IPV4 (UINT64_C(1) &lt;&lt; 3)
+#define SD_RESOLVED_MDNS_IPV6 (UINT64_C(1) &lt;&lt; 4)
+
+/* Input: Restrictions */
+#define SD_RESOLVED_NO_CNAME (UINT64_C(1) &lt;&lt; 5)
+#define SD_RESOLVED_NO_TXT (UINT64_C(1) &lt;&lt; 6)
+#define SD_RESOLVED_NO_ADDRESS (UINT64_C(1) &lt;&lt; 7)
+#define SD_RESOLVED_NO_SEARCH (UINT64_C(1) &lt;&lt; 8)
+#define SD_RESOLVED_NO_VALIDATE (UINT64_C(1) &lt;&lt; 10)
+#define SD_RESOLVED_NO_SYNTHESIZE (UINT64_C(1) &lt;&lt; 11)
+#define SD_RESOLVED_NO_CACHE (UINT64_C(1) &lt;&lt; 12)
+#define SD_RESOLVED_NO_ZONE (UINT64_C(1) &lt;&lt; 13)
+#define SD_RESOLVED_NO_TRUST_ANCHOR (UINT64_C(1) &lt;&lt; 14)
+#define SD_RESOLVED_NO_NETWORK (UINT64_C(1) &lt;&lt; 15)
+#define SD_RESOLVED_NO_STALE (UINT64_C(1) &lt;&lt; 24)
+
+/* Output: Security */
+#define SD_RESOLVED_AUTHENTICATED (UINT64_C(1) &lt;&lt; 9)
+#define SD_RESOLVED_CONFIDENTIAL (UINT64_C(1) &lt;&lt; 18)
+
+/* Output: Origin */
+#define SD_RESOLVED_SYNTHETIC (UINT64_C(1) &lt;&lt; 19)
+#define SD_RESOLVED_FROM_CACHE (UINT64_C(1) &lt;&lt; 20)
+#define SD_RESOLVED_FROM_ZONE (UINT64_C(1) &lt;&lt; 21)
+#define SD_RESOLVED_FROM_TRUST_ANCHOR (UINT64_C(1) &lt;&lt; 22)
+#define SD_RESOLVED_FROM_NETWORK (UINT64_C(1) &lt;&lt; 23)
+</programlisting>
+
+ <para>On input, the first five flags control the protocols to use for the look-up. They refer to
+ classic unicast DNS, LLMNR via IPv4/UDP and IPv6/UDP respectively, as well as MulticastDNS via
+ IPv4/UDP and IPv6/UDP. If all of these five bits are off on input (which is strongly recommended) the
+ look-up will be done via all suitable protocols for the specific look-up. Note that these flags
+ operate as filter only, but cannot force a look-up to be done via a protocol. Specifically,
+ <filename>systemd-resolved</filename> will only route look-ups within the .local TLD to MulticastDNS
+ (plus some reverse look-up address domains), and single-label names to LLMNR (plus some reverse
+ address lookup domains). It will route neither of these to Unicast DNS servers. Also, it will do
+ LLMNR and Multicast DNS only on interfaces suitable for multicast.</para>
+
+ <para>On output, these five flags indicate which protocol was used to execute the operation, and
+ hence where the data was found.</para>
+
+ <para>The primary use cases for these five flags are follow-up look-ups based on DNS data retrieved
+ earlier. In this case it is often a good idea to limit the follow-up look-up to the protocol that was
+ used to discover the first DNS result.</para>
+
+ <para>The NO_CNAME flag controls whether CNAME/DNAME resource records shall be followed during the
+ look-up. This flag is only available at input, none of the functions will return it on output. If a
+ CNAME/DNAME RR is discovered while resolving a hostname, an error is returned instead. By default,
+ when the flag is off, CNAME/DNAME RRs are followed.</para>
+
+ <para>The NO_TXT and NO_ADDRESS flags only influence operation of the
+ <function>ResolveService()</function> method. They are only defined for input, not output. If NO_TXT
+ is set, the DNS-SD TXT RR look-up is not done in the same operation. If NO_ADDRESS is set, the
+ discovered hostnames are not implicitly translated to their addresses.</para>
+
+ <para>The NO_SEARCH flag turns off the search domain logic. It is only defined for input in
+ <function>ResolveHostname()</function>. When specified, single-label hostnames are not qualified
+ using defined search domains, if any are configured. Note that <function>ResolveRecord()</function>
+ will never qualify single-label domain names using search domains. Also note that multi-label
+ hostnames are never subject to search list expansion.</para>
+
+ <para>NO_VALIDATE can be set to disable validation via DNSSEC even if it would normally be
+ used.</para>
+
+ <para>The next six flags allow disabling certain sources during resolution. NO_SYNTHESIZE disables
+ synthetic records, e.g. the local host name, see section SYNTHETIC RECORDS in
+ <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+ for more information. NO_CACHE disables the use of the cache of previously resolved records. NO_ZONE
+ disables answers using locally registered public LLMNR/mDNS resource records. NO_TRUST_ANCHOR
+ disables answers using locally configured trust anchors. NO_NETWORK requires all answers to be
+ provided without using the network, i.e. either from local sources or the cache. NO_STALE flag
+ can be set to disable answering request with stale records.</para>
+
+ <para>The AUTHENTICATED bit is defined only in the output flags of the four functions. If set, the
+ returned data has been fully authenticated. Specifically, this bit is set for all DNSSEC-protected
+ data for which a full trust chain may be established to a trusted domain anchor. It is also set for
+ locally synthesized data, such as <literal>localhost</literal> or data from
+ <filename>/etc/hosts</filename>. Moreover, it is set for all LLMNR or mDNS RRs which originate from
+ the local host. Applications that require authenticated RR data for operation should check this flag
+ before trusting the data. Note that <filename>systemd-resolved</filename> will never return
+ invalidated data, hence this flag simply allows one to discern the cases where data is known to be
+ trusted, or where there is proof that the data is "rightfully" unauthenticated (which includes cases
+ where the underlying protocol or server does not support authenticating data).</para>
+
+ <para>CONFIDENTIAL means the query was resolved via encrypted channels or never left this
+ system.</para>
+
+ <para>The next five bits flags are used in output and provide information about the origin of the
+ answer. FROM_SYNTHETIC means the query was (at least partially) synthesized locally. FROM_CACHE means
+ the query was answered (at least partially) using the cache. FROM_ZONE means the query was answered
+ (at least partially) based on public, locally registered records. FROM_TRUST_ANCHOR means the query
+ was answered (at least partially) using local trust anchors. FROM_NETWORK means the query was
+ answered (at least partially) using the network.</para>
+ </refsect3>
+ </refsect2>
+
+ <refsect2>
+ <title>Properties</title>
+
+ <para>The <varname>LLMNR</varname> and <varname>MulticastDNS</varname> properties report whether LLMNR
+ and MulticastDNS are (globally) enabled. Each may be one of <literal>yes</literal>,
+ <literal>no</literal>, and <literal>resolve</literal>. See <function>SetLinkLLMNR()</function>
+ and <function>SetLinkMulticastDNS()</function> above.</para>
+
+ <para><varname>LLMNRHostname</varname> contains the hostname currently exposed on the network via
+ LLMNR. It usually follows the system hostname as may be queried via
+ <citerefentry project="man-pages"><refentrytitle>gethostname</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ but may differ if a conflict is detected on the network.</para>
+
+ <para><varname>DNS</varname> and <varname>DNSEx</varname> contain arrays of all DNS servers currently
+ used by <filename>systemd-resolved</filename>. <varname>DNS</varname> contains information similar to
+ the DNS server data in <filename>/run/systemd/resolve/resolv.conf</filename>. Each structure in the
+ array consists of a numeric network interface index, an address family, and a byte array containing the
+ DNS server address (either 4 bytes in length for IPv4 or 16 bytes in lengths for IPv6).
+ <varname>DNSEx</varname> is similar, but additionally contains the IP port and server name (used for
+ Server Name Indication, SNI). Both arrays contain DNS servers configured system-wide, including those
+ possibly read from a foreign <filename>/etc/resolv.conf</filename> or the <varname>DNS=</varname>
+ setting in <filename>/etc/systemd/resolved.conf</filename>, as well as per-interface DNS server
+ information either retrieved from
+ <citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ or configured by external software via <function>SetLinkDNS()</function> or
+ <function>SetLinkDNSEx()</function> (see above). The network interface index will be 0 for the
+ system-wide configured services and non-zero for the per-link servers.</para>
+
+ <para><varname>FallbackDNS</varname> and <varname>FallbackDNSEx</varname> contain arrays of all DNS
+ servers configured as fallback servers, if any, using the same format as <varname>DNS</varname> and
+ <varname>DNSEx</varname> described above. See the description of <varname>FallbackDNS=</varname> in
+ <citerefentry><refentrytitle>resolved.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
+ the description of when those servers are used.</para>
+
+ <para><varname>CurrentDNSServer</varname> and <varname>CurrentDNSServerEx</varname> specify the server
+ that is currently used for query resolution, in the same format as a single entry in the
+ <varname>DNS</varname> and <varname>DNSEx</varname> arrays described above.</para>
+
+ <para>Similarly, the <varname>Domains</varname> property contains an array of all search and routing
+ domains currently used by <filename>systemd-resolved</filename>. Each entry consists of a network
+ interface index (again, 0 encodes system-wide entries), the actual domain name, and whether the entry
+ is used only for routing (true) or for both routing and searching (false).</para>
+
+ <para>The <varname>TransactionStatistics</varname> property contains information about the number of
+ transactions <filename>systemd-resolved</filename> has processed. It contains a pair of unsigned 64-bit counters, the first
+ containing the number of currently ongoing transactions, the second the number of total transactions
+ <filename>systemd-resolved</filename> is processing or has processed. The latter value may be reset using the
+ <function>ResetStatistics()</function> method described above. Note that the number of transactions does
+ not directly map to the number of issued resolver bus method calls. While simple look-ups usually require a
+ single transaction only, more complex look-ups might result in more, for example when CNAMEs or DNSSEC
+ are in use.</para>
+
+ <para>The <varname>CacheStatistics</varname> property contains information about the executed cache
+ operations so far. It exposes three 64-bit counters: the first being the total number of current cache
+ entries (both positive and negative), the second the number of cache hits, and the third the number of
+ cache misses. The latter counters may be reset using <function>ResetStatistics()</function> (see
+ above).</para>
+
+ <para>The <varname>DNSSEC</varname> property specifies current status of DNSSEC validation. It is one
+ of <literal>yes</literal> (validation is enforced), <literal>no</literal> (no validation is done),
+ <literal>allow-downgrade</literal> (validation is done if the current DNS server supports it). See the
+ description of <varname>DNSSEC=</varname> in
+ <citerefentry><refentrytitle>resolved.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ </para>
+
+ <para>The <varname>DNSSECStatistics</varname> property contains information about the DNSSEC
+ validations executed so far. It contains four 64-bit counters: the number of secure, insecure, bogus,
+ and indeterminate DNSSEC validations so far. The counters are increased for each validated RRset, and
+ each non-existence proof. The secure counter is increased for each operation that successfully verified
+ a signed reply, the insecure counter is increased for each operation that successfully verified that an
+ unsigned reply is rightfully unsigned. The bogus counter is increased for each operation where the
+ validation did not check out and the data is likely to have been tempered with. Finally the
+ indeterminate counter is increased for each operation which did not complete because the necessary keys
+ could not be acquired or the cryptographic algorithms were unknown.</para>
+
+ <para>The <varname>DNSSECSupported</varname> boolean property reports whether DNSSEC is enabled and
+ the selected DNS servers support it. It combines information about system-wide and per-link DNS
+ settings (see below), and only reports true if DNSSEC is enabled and supported on every interface for
+ which DNS is configured and for the system-wide settings if there are any. Note that <filename>systemd-resolved</filename> assumes
+ DNSSEC is supported by DNS servers until it verifies that this is not the case. Thus, the reported
+ value may initially be true, until the first transactions are executed.</para>
+
+ <para>The <varname>DNSOverTLS</varname> boolean property reports whether DNS-over-TLS is enabled.
+ </para>
+
+ <para>The <varname>ResolvConfMode</varname> property exposes how <filename>/etc/resolv.conf</filename>
+ is managed on the host. Currently, the values <literal>uplink</literal>, <literal>stub</literal>,
+ <literal>static</literal> (these three correspond to the three different files
+ <filename>systemd-resolved.service</filename> provides), <literal>foreign</literal> (the file is
+ managed by admin or another service, <filename>systemd-resolved.service</filename> just consumes it),
+ <literal>missing</literal> (<filename>/etc/resolv.conf</filename> is missing).</para>
+
+ <para>The <varname>DNSStubListener</varname> property reports whether the stub listener on port 53 is
+ enabled. Possible values are <literal>yes</literal> (enabled), <literal>no</literal> (disabled),
+ <literal>udp</literal> (only the UDP listener is enabled), and <literal>tcp</literal> (only the TCP
+ listener is enabled).</para>
+ </refsect2>
+ </refsect1>
+
+ <refsect1>
+ <title>Link Object</title>
+
+ <programlisting executable="systemd-resolved" node="/org/freedesktop/resolve1/link/_1" interface="org.freedesktop.resolve1.Link">
+node /org/freedesktop/resolve1/link/_1 {
+ interface org.freedesktop.resolve1.Link {
+ methods:
+ SetDNS(in a(iay) addresses);
+ SetDNSEx(in a(iayqs) addresses);
+ SetDomains(in a(sb) domains);
+ SetDefaultRoute(in b enable);
+ SetLLMNR(in s mode);
+ SetMulticastDNS(in s mode);
+ SetDNSOverTLS(in s mode);
+ SetDNSSEC(in s mode);
+ SetDNSSECNegativeTrustAnchors(in as names);
+ Revert();
+ properties:
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly t ScopesMask = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly a(iay) DNS = [...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly a(iayqs) DNSEx = [...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly (iay) CurrentDNSServer = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly (iayqs) CurrentDNSServerEx = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly a(sb) Domains = [...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly b DefaultRoute = ...;
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s LLMNR = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s MulticastDNS = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s DNSOverTLS = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly s DNSSEC = '...';
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly as DNSSECNegativeTrustAnchors = ['...', ...];
+ @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
+ readonly b DNSSECSupported = ...;
+ };
+ interface org.freedesktop.DBus.Peer { ... };
+ interface org.freedesktop.DBus.Introspectable { ... };
+ interface org.freedesktop.DBus.Properties { ... };
+};
+ </programlisting>
+
+ <!--property DNSSECNegativeTrustAnchors is not documented!-->
+
+ <!--Autogenerated cross-references for systemd.directives, do not edit-->
+
+ <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.resolve1.Link"/>
+
+ <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.resolve1.Link"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetDNS()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetDNSEx()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetDomains()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetDefaultRoute()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetLLMNR()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetMulticastDNS()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetDNSOverTLS()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetDNSSEC()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="SetDNSSECNegativeTrustAnchors()"/>
+
+ <variablelist class="dbus-method" generated="True" extra-ref="Revert()"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="ScopesMask"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNS"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSEx"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="CurrentDNSServer"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="CurrentDNSServerEx"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="Domains"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DefaultRoute"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="LLMNR"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="MulticastDNS"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSOverTLS"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSSEC"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSSECNegativeTrustAnchors"/>
+
+ <variablelist class="dbus-property" generated="True" extra-ref="DNSSECSupported"/>
+
+ <!--End of Autogenerated section-->
+
+ <para>For each Linux network interface a "Link" object is created which exposes per-link DNS
+ configuration and state. Use <function>GetLink()</function> on the Manager interface to retrieve the
+ object path for a link object given the network interface index (see above).</para>
+
+ <refsect2>
+ <title>Methods</title>
+
+ <para>The various methods exposed by the Link interface are equivalent to their similarly named
+ counterparts on the Manager interface. e.g. <function>SetDNS()</function> on the Link object maps to
+ <function>SetLinkDNS()</function> on the Manager object, the main difference being that the later
+ expects an interface index to be specified. Invoking the methods on the Manager interface has the
+ benefit of reducing roundtrips, as it is not necessary to first request the Link object path via
+ <function>GetLink()</function> before invoking the methods. The same relationship holds for
+ <function>SetDNSEx()</function>, <function>SetDomains()</function>,
+ <function>SetDefaultRoute()</function>, <function>SetLLMNR()</function>,
+ <function>SetMulticastDNS()</function>, <function>SetDNSOverTLS()</function>,
+ <function>SetDNSSEC()</function>, <function>SetDNSSECNegativeTrustAnchors()</function>, and
+ <function>Revert()</function>. For further details on these methods see the
+ <interfacename>Manager</interfacename> documentation above.</para>
+ </refsect2>
+
+ <refsect2>
+ <title>Properties</title>
+
+ <para><varname>ScopesMask</varname> defines which resolver scopes are currently active on this
+ interface. This 64-bit unsigned integer field is a bit mask consisting of a subset of the bits of the
+ flags parameter describe above. Specifically, it may have the DNS, LLMNR and MDNS bits (the latter in
+ IPv4 and IPv6 flavours) set. Each individual bit is set when the protocol applies to a specific
+ interface and is enabled for it. It is unset otherwise. Specifically, a multicast-capable interface in
+ the "UP" state with an IP address is suitable for LLMNR or MulticastDNS, and any interface that is UP and
+ has an IP address is suitable for DNS. Note the relationship of the bits exposed here with the LLMNR
+ and MulticastDNS properties also exposed on the Link interface. The latter expose what is *configured*
+ to be used on the interface, the former expose what is actually used on the interface, taking into
+ account the abilities of the interface.</para>
+
+ <para><varname>DNSSECSupported</varname> exposes a boolean field that indicates whether DNSSEC is
+ currently configured and in use on the interface. Note that if DNSSEC is enabled on an interface, it is
+ assumed available until it is detected that the configured server does not actually support it. Thus,
+ this property may initially report that DNSSEC is supported on an interface.</para>
+
+ <para><varname>DefaultRoute</varname> exposes a boolean field that indicates whether the interface will
+ be used as default route for name queries. See <function>SetLinkDefaultRoute()</function> above.</para>
+
+ <para>The other properties reflect the state of the various configuration settings for the link which
+ may be set with the various methods calls such as <function>SetDNS()</function> or
+ <function>SetLLMNR()</function>.</para>
+ </refsect2>
+ </refsect1>
+
+ <refsect1>
+ <title>Common Errors</title>
+
+ <para>Many bus methods <filename>systemd-resolved</filename> exposes (in particular the resolver methods such
+ as <function>ResolveHostname()</function> on the <interfacename>Manager</interfacename> interface) may return
+ some of the following errors:</para>
+
+ <variablelist>
+ <varlistentry><term><constant>org.freedesktop.resolve1.NoNameServers</constant></term>
+ <listitem><para>No suitable DNS servers were found to resolve a request.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.InvalidReply</constant></term>
+ <listitem><para>A response from the selected DNS server was not understood.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.NoSuchRR</constant></term>
+ <listitem><para>The requested name exists, but there is no resource record of the requested type for
+ it. (This is the DNS NODATA case).</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem></varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.CNameLoop</constant></term>
+ <listitem><para>The look-up failed because a CNAME or DNAME loop was detected.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.Aborted</constant></term>
+ <listitem><para>The look-up was aborted because the selected protocol became unavailable while the
+ operation was ongoing.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.NoSuchService</constant></term>
+ <listitem><para>A service look-up was successful, but the <constant class="dns">SRV</constant> record
+ reported that the service is not available.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem></varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.DnssecFailed</constant></term>
+ <listitem><para>The acquired response did not pass DNSSEC validation.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.NoTrustAnchor</constant></term>
+ <listitem><para>No chain of trust could be established for the response to a configured DNSSEC trust
+ anchor.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.ResourceRecordTypeUnsupported</constant></term>
+ <listitem><para>The requested resource record type is not supported on the selected DNS servers. This
+ error is generated for example when an RRSIG record is requested from a DNS server that does not
+ support DNSSEC.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.NoSuchLink</constant></term>
+ <listitem><para>No network interface with the specified network interface index exists.
+ </para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem></varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.LinkBusy</constant></term>
+ <listitem><para>The requested configuration change could not be made because
+ <citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ already took possession of the interface and supplied configuration data for it.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.NetworkDown</constant></term>
+ <listitem><para>The requested look-up failed because the system is currently not connected to any
+ suitable network.</para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem></varlistentry>
+
+ <varlistentry><term><constant>org.freedesktop.resolve1.DnsError.NXDOMAIN</constant></term>
+ <term><constant>org.freedesktop.resolve1.DnsError.REFUSED</constant></term>
+ <term>...</term>
+ <listitem><para>The look-up failed with a DNS return code reporting a failure. The error names used as
+ suffixes here are defined in by IANA in
+ <ulink url="https://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6">DNS RCODEs</ulink>.
+ </para>
+
+ <xi:include href="version-info.xml" xpointer="v246"/></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Examples</title>
+
+ <example>
+ <title>Introspect <interfacename>org.freedesktop.resolve1.Manager</interfacename> on the bus</title>
+
+ <programlisting>
+$ gdbus introspect --system \
+ --dest org.freedesktop.resolve1 \
+ --object-path /org/freedesktop/resolve1
+ </programlisting>
+ </example>
+
+ <example>
+ <title>Introspect <interfacename>org.freedesktop.resolve1.Link</interfacename> on the bus</title>
+
+ <programlisting>
+$ gdbus introspect --system \
+ --dest org.freedesktop.resolve1 \
+ --object-path /org/freedesktop/resolve1/link/_11
+ </programlisting>
+ </example>
+ </refsect1>
+
+ <xi:include href="org.freedesktop.locale1.xml" xpointer="versioning"/>
+</refentry>