diff options
Diffstat (limited to 'test/units/testsuite-13.nss-mymachines.sh')
| -rwxr-xr-x | test/units/testsuite-13.nss-mymachines.sh | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/test/units/testsuite-13.nss-mymachines.sh b/test/units/testsuite-13.nss-mymachines.sh new file mode 100755 index 0000000..b566c73 --- /dev/null +++ b/test/units/testsuite-13.nss-mymachines.sh @@ -0,0 +1,135 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: LGPL-2.1-or-later +# shellcheck disable=SC2016 +set -eux +set -o pipefail + +# shellcheck source=test/units/util.sh +. "$(dirname "$0")"/util.sh + +at_exit() { + set +e + + machinectl kill --signal=KILL nss-mymachines-{noip,singleip,manyips} + mountpoint -q /var/lib/machines && timeout 10 sh -c "until umount /var/lib/machines; do sleep .5; done" + rm -f /run/systemd/nspawn/*.nspawn +} + +trap at_exit EXIT + +mkdir -p /var/lib/machines +mount -t tmpfs tmpfs /var/lib/machines + +# Create a bunch of containers that: +# 1) Have no IP addresses assigned +create_dummy_container /var/lib/machines/nss-mymachines-noip +cat >/var/lib/machines/nss-mymachines-noip/sbin/init <<\EOF +#!/usr/bin/bash -ex + +ip addr show dev ve-noip +touch /initialized +sleep infinity & +# Run the sleep command asynchronously, so bash is able to process signals +while :; do + wait || : +done +EOF +# 2) Have one IP address assigned (IPv4 only) +create_dummy_container /var/lib/machines/nss-mymachines-singleip +cat >/var/lib/machines/nss-mymachines-singleip/sbin/init <<\EOF +#!/usr/bin/bash -ex + +ip addr add 10.1.0.2/24 dev ve-singleip +ip addr show dev ve-singleip +touch /initialized +sleep infinity & +while :; do + wait || : +done +EOF +# 3) Have bunch of IP addresses assigned (both IPv4 and IPv6) +create_dummy_container /var/lib/machines/nss-mymachines-manyips +cat >/var/lib/machines/nss-mymachines-manyips/sbin/init <<\EOF +#!/usr/bin/bash -ex + +ip addr add 10.2.0.2/24 dev ve-manyips +for i in {100..120}; do + ip addr add 10.2.0.$i/24 dev ve-manyips +done +ip addr add fd00:dead:beef:cafe::2/64 dev ve-manyips +ip addr show dev ve-manyips +touch /initialized +sleep infinity +while :; do + wait || : +done +EOF +# Create the respective .nspawn config files +mkdir -p /run/systemd/nspawn +for container in noip singleip manyips; do + cat >"/run/systemd/nspawn/nss-mymachines-$container.nspawn" <<EOF +[Exec] +Boot=yes + +[Network] +VirtualEthernetExtra=ve-$container +EOF +done + +# Start the containers and wait until all of them are initialized +machinectl start nss-mymachines-{noip,singleip,manyips} +for container in nss-mymachines-{noip,singleip,manyips}; do + timeout 30 bash -xec "while [[ ! -e /var/lib/machines/$container/initialized ]]; do sleep .5; done" +done + +# We need to configure the dummy interfaces on the "outside" as well for `getent {ahosts4,ahosts6}` to work +# properly. This is caused by getaddrinfo() calling _check_pf() that iterates through all interfaces and +# notes if any of them has an IPv4/IPv6 - this is then used together with AF_INET/AF_INET6 to determine if we +# can ever return a valid answer, and if we configured the container interfaces only in the container, we +# would have no valid IPv4/IPv6 on the "outside" (as we don't set up any other netdev) which would make +# getaddrinfo() return EAI_NONAME without ever asking nss-mymachines. +ip addr add 10.1.0.1/24 dev ve-singleip +ip addr add 10.2.0.1/24 dev ve-manyips +ip addr add fd00:dead:beef:cafe::1/64 dev ve-manyips + +getent hosts -s mymachines +getent ahosts -s mymachines + +# And finally check if we can resolve the containers via nss-mymachines +for database in hosts ahosts{,v4,v6}; do + (! getent "$database" -s mymachines nss-mymachines-noip) +done + +run_and_grep "^10\.1\.0\.2\s+nss-mymachines-singleip$" getent hosts -s mymachines nss-mymachines-singleip +run_and_grep "^10\.1\.0\.2\s+STREAM" getent ahosts -s mymachines nss-mymachines-singleip +run_and_grep "^10\.1\.0\.2\s+STREAM" getent ahostsv4 -s mymachines nss-mymachines-singleip +run_and_grep "^::ffff:10\.1\.0\.2\s+STREAM" getent ahostsv6 -s mymachines nss-mymachines-singleip + +run_and_grep "^fd00:dead:beef:cafe::2\s+nss-mymachines-manyips$" getent hosts -s mymachines nss-mymachines-manyips +run_and_grep "^fd00:dead:beef:cafe::2\s+STREAM" getent ahosts -s mymachines nss-mymachines-manyips +run_and_grep "^10\.2\.0\.2\s+STREAM" getent ahosts -s mymachines nss-mymachines-manyips +for i in {100..120}; do + run_and_grep "^10\.2\.0\.$i\s+STREAM" getent ahosts -s mymachines nss-mymachines-manyips + run_and_grep "^10\.2\.0\.$i\s+STREAM" getent ahostsv4 -s mymachines nss-mymachines-manyips +done +run_and_grep "^fd00:dead:beef:cafe::2\s+STREAM" getent ahostsv6 -s mymachines nss-mymachines-manyips +(! run_and_grep "^fd00:" getent ahostsv4 -s mymachines nss-mymachines-manyips) +(! run_and_grep "^10\.2:" getent ahostsv6 -s mymachines nss-mymachines-manyips) + +# Multiple machines at once +run_and_grep "^10\.1\.0\.2\s+nss-mymachines-singleip$" getent hosts -s mymachines nss-mymachines-{singleip,manyips} +run_and_grep "^fd00:dead:beef:cafe::2\s+nss-mymachines-manyips$" getent hosts -s mymachines nss-mymachines-{singleip,manyips} +run_and_grep "^10\.1\.0\.2\s+STREAM" getent ahosts -s mymachines nss-mymachines-{singleip,manyips} +run_and_grep "^10\.2\.0\.2\s+STREAM" getent ahosts -s mymachines nss-mymachines-{singleip,manyips} +run_and_grep "^fd00:dead:beef:cafe::2\s+STREAM" getent ahosts -s mymachines nss-mymachines-{singleip,manyips} + +for database in hosts ahosts ahostsv4 ahostsv6; do + (! getent "$database" -s mymachines foo-bar-baz) +done + +# getgrid(), getgrnam(), getpwuid(), and getpwnam() are explicitly handled by nss-mymachines, so probe them +# as well +(! getent group -s mymachines foo 11) +(! getent passwd -s mymachines foo 11) + +machinectl stop nss-mymachines-{noip,singleip,manyips} |