summaryrefslogtreecommitdiffstats
path: root/test/units/testsuite-36.sh
diff options
context:
space:
mode:
Diffstat (limited to 'test/units/testsuite-36.sh')
-rwxr-xr-xtest/units/testsuite-36.sh352
1 files changed, 352 insertions, 0 deletions
diff --git a/test/units/testsuite-36.sh b/test/units/testsuite-36.sh
new file mode 100755
index 0000000..8a53b98
--- /dev/null
+++ b/test/units/testsuite-36.sh
@@ -0,0 +1,352 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: LGPL-2.1-or-later
+set -eux
+set -o pipefail
+
+# shellcheck disable=SC2317
+at_exit() {
+ # shellcheck disable=SC2181
+ if [[ $? -ne 0 ]]; then
+ # We're exiting with a non-zero EC, let's dump test artifacts
+ # for easier debugging
+ [[ -v straceLog && -f "$straceLog" ]] && cat "$straceLog"
+ [[ -v journalLog && -f "$journalLog" ]] && cat "$journalLog"
+ fi
+}
+
+trap at_exit EXIT
+
+systemd-analyze log-level debug
+systemd-analyze log-target journal
+
+# Log files
+straceLog='strace.log'
+journalLog='journal.log'
+
+# Systemd config files
+testUnit='numa-test.service'
+testUnitFile="/run/systemd/system/$testUnit"
+testUnitNUMAConf="$testUnitFile.d/numa.conf"
+
+# Sleep constants (we should probably figure out something better but nothing comes to mind)
+sleepAfterStart=1
+
+# Journal cursor for easier navigation
+journalCursorFile="jounalCursorFile"
+
+startStrace() {
+ coproc strace -qq -p 1 -o "$straceLog" -e set_mempolicy -s 1024 ${1:+"$1"}
+ # Wait for strace to properly "initialize", i.e. until PID 1 has the TracerPid
+ # field set to the current strace's PID
+ until awk -v spid="$COPROC_PID" '/^TracerPid:/ {exit !($2 == spid);}' /proc/1/status; do sleep 0.1; done
+}
+
+stopStrace() {
+ [[ -v COPROC_PID ]] || return
+
+ local PID=$COPROC_PID
+ kill -s TERM "$PID"
+ # Make sure the strace process is indeed dead
+ while kill -0 "$PID" 2>/dev/null; do sleep 0.1; done
+}
+
+startJournalctl() {
+ : >"$journalCursorFile"
+ # Save journal's cursor for later navigation
+ journalctl --no-pager --cursor-file="$journalCursorFile" -n0 -ocat
+}
+
+stopJournalctl() {
+ local unit="${1:-init.scope}"
+ # Using journalctl --sync should be better than using SIGRTMIN+1, as
+ # the --sync wait until the synchronization is complete
+ echo "Force journald to write all queued messages"
+ journalctl --sync
+ journalctl -u "$unit" --cursor-file="$journalCursorFile" >"$journalLog"
+}
+
+checkNUMA() {
+ # NUMA enabled system should have at least NUMA node0
+ test -e /sys/devices/system/node/node0
+}
+
+writePID1NUMAPolicy() {
+ cat >"$confDir/numa.conf" <<EOF
+[Manager]
+NUMAPolicy=${1:?}
+NUMAMask=${2:-""}
+EOF
+}
+
+writeTestUnit() {
+ mkdir -p "$testUnitFile.d/"
+ printf "[Service]\nExecStart=/bin/sleep 3600\n" >"$testUnitFile"
+}
+
+writeTestUnitNUMAPolicy() {
+ cat >"$testUnitNUMAConf" <<EOF
+[Service]
+NUMAPolicy=${1:?}
+NUMAMask=${2:-""}
+EOF
+ systemctl daemon-reload
+}
+
+pid1ReloadWithStrace() {
+ startStrace
+ systemctl daemon-reload
+ sleep $sleepAfterStart
+ stopStrace
+}
+
+pid1ReloadWithJournal() {
+ startJournalctl
+ systemctl daemon-reload
+ stopJournalctl
+}
+
+pid1StartUnitWithStrace() {
+ startStrace '-f'
+ systemctl start "${1:?}"
+ sleep $sleepAfterStart
+ stopStrace
+}
+
+pid1StartUnitWithJournal() {
+ startJournalctl
+ systemctl start "${1:?}"
+ sleep $sleepAfterStart
+ stopJournalctl
+}
+
+pid1StopUnit() {
+ systemctl stop "${1:?}"
+}
+
+systemctlCheckNUMAProperties() {
+ local UNIT_NAME="${1:?}"
+ local NUMA_POLICY="${2:?}"
+ local NUMA_MASK="${3:-""}"
+ local LOGFILE
+
+ LOGFILE="$(mktemp)"
+
+ systemctl show -p NUMAPolicy "$UNIT_NAME" >"$LOGFILE"
+ grep "NUMAPolicy=$NUMA_POLICY" "$LOGFILE"
+
+ : >"$LOGFILE"
+
+ if [ -n "$NUMA_MASK" ]; then
+ systemctl show -p NUMAMask "$UNIT_NAME" >"$LOGFILE"
+ grep "NUMAMask=$NUMA_MASK" "$LOGFILE"
+ fi
+}
+
+writeTestUnit
+
+# Create systemd config drop-in directory
+confDir="/run/systemd/system.conf.d/"
+mkdir -p "$confDir"
+
+if ! checkNUMA; then
+ echo >&2 "NUMA is not supported on this machine, switching to a simple sanity check"
+
+ echo "PID1 NUMAPolicy=default && NUMAMask=0 check without NUMA support"
+ writePID1NUMAPolicy "default" "0"
+ startJournalctl
+ systemctl daemon-reload
+ stopJournalctl
+ grep "NUMA support not available, ignoring" "$journalLog"
+
+ echo "systemd-run NUMAPolicy=default && NUMAMask=0 check without NUMA support"
+ runUnit='numa-systemd-run-test.service'
+ startJournalctl
+ systemd-run -p NUMAPolicy=default -p NUMAMask=0 --unit "$runUnit" sleep 1000
+ sleep $sleepAfterStart
+ pid1StopUnit "$runUnit"
+ stopJournalctl "$runUnit"
+ grep "NUMA support not available, ignoring" "$journalLog"
+
+else
+ echo "PID1 NUMAPolicy support - Default policy w/o mask"
+ writePID1NUMAPolicy "default"
+ pid1ReloadWithStrace
+ # Kernel requires that nodemask argument is set to NULL when setting default policy
+ grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+ echo "PID1 NUMAPolicy support - Default policy w/ mask"
+ writePID1NUMAPolicy "default" "0"
+ pid1ReloadWithStrace
+ grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+ echo "PID1 NUMAPolicy support - Bind policy w/o mask"
+ writePID1NUMAPolicy "bind"
+ pid1ReloadWithJournal
+ grep "Failed to set NUMA memory policy, ignoring: Invalid argument" "$journalLog"
+
+ echo "PID1 NUMAPolicy support - Bind policy w/ mask"
+ writePID1NUMAPolicy "bind" "0"
+ pid1ReloadWithStrace
+ grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" "$straceLog"
+
+ echo "PID1 NUMAPolicy support - Interleave policy w/o mask"
+ writePID1NUMAPolicy "interleave"
+ pid1ReloadWithJournal
+ grep "Failed to set NUMA memory policy, ignoring: Invalid argument" "$journalLog"
+
+ echo "PID1 NUMAPolicy support - Interleave policy w/ mask"
+ writePID1NUMAPolicy "interleave" "0"
+ pid1ReloadWithStrace
+ grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" "$straceLog"
+
+ echo "PID1 NUMAPolicy support - Preferred policy w/o mask"
+ writePID1NUMAPolicy "preferred"
+ pid1ReloadWithJournal
+ # Preferred policy with empty node mask is actually allowed and should reset allocation policy to default
+ grep "Failed to set NUMA memory policy, ignoring: Invalid argument" "$journalLog" && { echo >&2 "unexpected pass"; exit 1; }
+
+ echo "PID1 NUMAPolicy support - Preferred policy w/ mask"
+ writePID1NUMAPolicy "preferred" "0"
+ pid1ReloadWithStrace
+ grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" "$straceLog"
+
+ echo "PID1 NUMAPolicy support - Local policy w/o mask"
+ writePID1NUMAPolicy "local"
+ pid1ReloadWithStrace
+ # Kernel requires that nodemask argument is set to NULL when setting default policy
+ # The unpatched versions of strace don't recognize the MPOL_LOCAL constant and
+ # return a numerical constant instead (with a comment):
+ # set_mempolicy(0x4 /* MPOL_??? */, NULL, 0) = 0
+ # Let's cover this scenario as well
+ grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+ echo "PID1 NUMAPolicy support - Local policy w/ mask"
+ writePID1NUMAPolicy "local" "0"
+ pid1ReloadWithStrace
+ grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+ echo "Unit file NUMAPolicy support - Default policy w/o mask"
+ writeTestUnitNUMAPolicy "default"
+ pid1StartUnitWithStrace "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "default"
+ pid1StopUnit "$testUnit"
+ grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+ echo "Unit file NUMAPolicy support - Default policy w/ mask"
+ writeTestUnitNUMAPolicy "default" "0"
+ pid1StartUnitWithStrace "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "default" "0"
+ pid1StopUnit $testUnit
+ # Mask must be ignored
+ grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+ echo "Unit file NUMAPolicy support - Bind policy w/o mask"
+ writeTestUnitNUMAPolicy "bind"
+ pid1StartUnitWithJournal "$testUnit"
+ pid1StopUnit "$testUnit"
+ [[ $(systemctl show "$testUnit" -P ExecMainStatus) == "242" ]]
+
+ echo "Unit file NUMAPolicy support - Bind policy w/ mask"
+ writeTestUnitNUMAPolicy "bind" "0"
+ pid1StartUnitWithStrace "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "bind" "0"
+ pid1StopUnit "$testUnit"
+ grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" "$straceLog"
+
+ echo "Unit file NUMAPolicy support - Interleave policy w/o mask"
+ writeTestUnitNUMAPolicy "interleave"
+ pid1StartUnitWithStrace "$testUnit"
+ pid1StopUnit "$testUnit"
+ [[ $(systemctl show "$testUnit" -P ExecMainStatus) == "242" ]]
+
+ echo "Unit file NUMAPolicy support - Interleave policy w/ mask"
+ writeTestUnitNUMAPolicy "interleave" "0"
+ pid1StartUnitWithStrace "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "interleave" "0"
+ pid1StopUnit "$testUnit"
+ grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" "$straceLog"
+
+ echo "Unit file NUMAPolicy support - Preferred policy w/o mask"
+ writeTestUnitNUMAPolicy "preferred"
+ pid1StartUnitWithJournal "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "preferred"
+ pid1StopUnit "$testUnit"
+ [[ $(systemctl show "$testUnit" -P ExecMainStatus) == "242" ]] && { echo >&2 "unexpected pass"; exit 1; }
+
+ echo "Unit file NUMAPolicy support - Preferred policy w/ mask"
+ writeTestUnitNUMAPolicy "preferred" "0"
+ pid1StartUnitWithStrace "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "preferred" "0"
+ pid1StopUnit "$testUnit"
+ grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" "$straceLog"
+
+ echo "Unit file NUMAPolicy support - Local policy w/o mask"
+ writeTestUnitNUMAPolicy "local"
+ pid1StartUnitWithStrace "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "local"
+ pid1StopUnit "$testUnit"
+ grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+ echo "Unit file NUMAPolicy support - Local policy w/ mask"
+ writeTestUnitNUMAPolicy "local" "0"
+ pid1StartUnitWithStrace "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "local" "0"
+ pid1StopUnit "$testUnit"
+ # Mask must be ignored
+ grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+ echo "Unit file CPUAffinity=NUMA support"
+ writeTestUnitNUMAPolicy "bind" "0"
+ echo "CPUAffinity=numa" >>"$testUnitNUMAConf"
+ systemctl daemon-reload
+ systemctl start "$testUnit"
+ systemctlCheckNUMAProperties "$testUnit" "bind" "0"
+ cpulist="$(cat /sys/devices/system/node/node0/cpulist)"
+ affinity_systemd="$(systemctl show --value -p CPUAffinity "$testUnit")"
+ [ "$cpulist" = "$affinity_systemd" ]
+ pid1StopUnit "$testUnit"
+
+ echo "systemd-run NUMAPolicy support"
+ runUnit='numa-systemd-run-test.service'
+
+ systemd-run -p NUMAPolicy=default --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "default"
+ pid1StopUnit "$runUnit"
+
+ systemd-run -p NUMAPolicy=default -p NUMAMask=0 --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "default" ""
+ pid1StopUnit "$runUnit"
+
+ systemd-run -p NUMAPolicy=bind -p NUMAMask=0 --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "bind" "0"
+ pid1StopUnit "$runUnit"
+
+ systemd-run -p NUMAPolicy=interleave -p NUMAMask=0 --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "interleave" "0"
+ pid1StopUnit "$runUnit"
+
+ systemd-run -p NUMAPolicy=preferred -p NUMAMask=0 --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "preferred" "0"
+ pid1StopUnit "$runUnit"
+
+ systemd-run -p NUMAPolicy=local --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "local"
+ pid1StopUnit "$runUnit"
+
+ systemd-run -p NUMAPolicy=local -p NUMAMask=0 --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "local" ""
+ pid1StopUnit "$runUnit"
+
+ systemd-run -p NUMAPolicy=local -p NUMAMask=0 -p CPUAffinity=numa --unit "$runUnit" sleep 1000
+ systemctlCheckNUMAProperties "$runUnit" "local" ""
+ systemctl cat "$runUnit" | grep -q 'CPUAffinity=numa'
+ pid1StopUnit "$runUnit"
+fi
+
+# Cleanup
+rm -rf "$confDir"
+systemctl daemon-reload
+
+systemd-analyze log-level info
+
+touch /testok
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 21:09:51 +0000