From fc53809803cd2bc2434e312b19a18fa36776da12 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 12 Jun 2024 05:50:40 +0200 Subject: Adding upstream version 256. Signed-off-by: Daniel Baumann --- src/basic/linux/btrfs.h | 20 +- src/basic/linux/btrfs_tree.h | 74 ++++- src/basic/linux/fou.h | 56 ++-- src/basic/linux/if_bridge.h | 32 ++ src/basic/linux/if_link.h | 569 +++++++++++++++++++++++++++++++++- src/basic/linux/in.h | 2 + src/basic/linux/in6.h | 2 +- src/basic/linux/magic.h | 106 +++++++ src/basic/linux/netfilter.h | 76 +++++ src/basic/linux/netfilter/nf_tables.h | 37 ++- src/basic/linux/netlink.h | 5 + src/basic/linux/nexthop.h | 45 +++ src/basic/linux/nl80211.h | 400 ++++++++++++++++++++---- src/basic/linux/pkt_sched.h | 152 +++------ src/basic/linux/rtnetlink.h | 20 +- src/basic/linux/stddef.h | 13 +- 16 files changed, 1383 insertions(+), 226 deletions(-) create mode 100644 src/basic/linux/magic.h create mode 100644 src/basic/linux/netfilter.h (limited to 'src/basic/linux') diff --git a/src/basic/linux/btrfs.h b/src/basic/linux/btrfs.h index 74ed908..73a295e 100644 --- a/src/basic/linux/btrfs.h +++ b/src/basic/linux/btrfs.h @@ -94,6 +94,7 @@ struct btrfs_qgroup_limit { * struct btrfs_qgroup_inherit.flags */ #define BTRFS_QGROUP_INHERIT_SET_LIMITS (1ULL << 0) +#define BTRFS_QGROUP_INHERIT_FLAGS_SUPP (BTRFS_QGROUP_INHERIT_SET_LIMITS) struct btrfs_qgroup_inherit { __u64 flags; @@ -189,6 +190,7 @@ struct btrfs_scrub_progress { }; #define BTRFS_SCRUB_READONLY 1 +#define BTRFS_SCRUB_SUPPORTED_FLAGS (BTRFS_SCRUB_READONLY) struct btrfs_ioctl_scrub_args { __u64 devid; /* in */ __u64 start; /* in */ @@ -247,7 +249,17 @@ struct btrfs_ioctl_dev_info_args { __u8 uuid[BTRFS_UUID_SIZE]; /* in/out */ __u64 bytes_used; /* out */ __u64 total_bytes; /* out */ - __u64 unused[379]; /* pad to 4k */ + /* + * Optional, out. + * + * Showing the fsid of the device, allowing user space to check if this + * device is a seeding one. + * + * Introduced in v6.3, thus user space still needs to check if kernel + * changed this value. Older kernel will not touch the values here. + */ + __u8 fsid[BTRFS_UUID_SIZE]; + __u64 unused[377]; /* pad to 4k */ __u8 path[BTRFS_DEVICE_PATH_NAME_MAX]; /* out */ }; @@ -324,6 +336,8 @@ struct btrfs_ioctl_fs_info_args { #define BTRFS_FEATURE_INCOMPAT_RAID1C34 (1ULL << 11) #define BTRFS_FEATURE_INCOMPAT_ZONED (1ULL << 12) #define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2 (1ULL << 13) +#define BTRFS_FEATURE_INCOMPAT_RAID_STRIPE_TREE (1ULL << 14) +#define BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA (1ULL << 16) struct btrfs_ioctl_feature_flags { __u64 compat_flags; @@ -603,6 +617,9 @@ struct btrfs_ioctl_clone_range_args { */ #define BTRFS_DEFRAG_RANGE_COMPRESS 1 #define BTRFS_DEFRAG_RANGE_START_IO 2 +#define BTRFS_DEFRAG_RANGE_FLAGS_SUPP (BTRFS_DEFRAG_RANGE_COMPRESS | \ + BTRFS_DEFRAG_RANGE_START_IO) + struct btrfs_ioctl_defrag_range_args { /* start of the defrag operation */ __u64 start; @@ -744,6 +761,7 @@ struct btrfs_ioctl_get_dev_stats { #define BTRFS_QUOTA_CTL_ENABLE 1 #define BTRFS_QUOTA_CTL_DISABLE 2 #define BTRFS_QUOTA_CTL_RESCAN__NOTUSED 3 +#define BTRFS_QUOTA_CTL_ENABLE_SIMPLE_QUOTA 4 struct btrfs_ioctl_quota_ctl_args { __u64 cmd; __u64 status; diff --git a/src/basic/linux/btrfs_tree.h b/src/basic/linux/btrfs_tree.h index ab38d0f..d24e8e1 100644 --- a/src/basic/linux/btrfs_tree.h +++ b/src/basic/linux/btrfs_tree.h @@ -73,6 +73,9 @@ /* Holds the block group items for extent tree v2. */ #define BTRFS_BLOCK_GROUP_TREE_OBJECTID 11ULL +/* Tracks RAID stripes in block groups. */ +#define BTRFS_RAID_STRIPE_TREE_OBJECTID 12ULL + /* device stats in the device tree */ #define BTRFS_DEV_STATS_OBJECTID 0ULL @@ -216,11 +219,31 @@ */ #define BTRFS_METADATA_ITEM_KEY 169 +/* + * Special inline ref key which stores the id of the subvolume which originally + * created the extent. This subvolume owns the extent permanently from the + * perspective of simple quotas. Needed to know which subvolume to free quota + * usage from when the extent is deleted. + * + * Stored as an inline ref rather to avoid wasting space on a separate item on + * top of the existing extent item. However, unlike the other inline refs, + * there is one one owner ref per extent rather than one per extent. + * + * Because of this, it goes at the front of the list of inline refs, and thus + * must have a lower type value than any other inline ref type (to satisfy the + * disk format rule that inline refs have non-decreasing type). + */ +#define BTRFS_EXTENT_OWNER_REF_KEY 172 + #define BTRFS_TREE_BLOCK_REF_KEY 176 #define BTRFS_EXTENT_DATA_REF_KEY 178 -#define BTRFS_EXTENT_REF_V0_KEY 180 +/* + * Obsolete key. Defintion removed in 6.6, value may be reused in the future. + * + * #define BTRFS_EXTENT_REF_V0_KEY 180 + */ #define BTRFS_SHARED_BLOCK_REF_KEY 182 @@ -257,6 +280,8 @@ #define BTRFS_DEV_ITEM_KEY 216 #define BTRFS_CHUNK_ITEM_KEY 228 +#define BTRFS_RAID_STRIPE_KEY 230 + /* * Records the overall state of the qgroups. * There's only one instance of this key present, @@ -715,6 +740,30 @@ struct btrfs_free_space_header { __le64 num_bitmaps; } __attribute__ ((__packed__)); +struct btrfs_raid_stride { + /* The id of device this raid extent lives on. */ + __le64 devid; + /* The physical location on disk. */ + __le64 physical; +} __attribute__ ((__packed__)); + +/* The stripe_extent::encoding, 1:1 mapping of enum btrfs_raid_types. */ +#define BTRFS_STRIPE_RAID0 1 +#define BTRFS_STRIPE_RAID1 2 +#define BTRFS_STRIPE_DUP 3 +#define BTRFS_STRIPE_RAID10 4 +#define BTRFS_STRIPE_RAID5 5 +#define BTRFS_STRIPE_RAID6 6 +#define BTRFS_STRIPE_RAID1C3 7 +#define BTRFS_STRIPE_RAID1C4 8 + +struct btrfs_stripe_extent { + __u8 encoding; + __u8 reserved[7]; + /* An array of raid strides this stripe is composed of. */ + struct btrfs_raid_stride strides[]; +} __attribute__ ((__packed__)); + #define BTRFS_HEADER_FLAG_WRITTEN (1ULL << 0) #define BTRFS_HEADER_FLAG_RELOC (1ULL << 1) @@ -783,6 +832,10 @@ struct btrfs_shared_data_ref { __le32 count; } __attribute__ ((__packed__)); +struct btrfs_extent_owner_ref { + __le64 root_id; +} __attribute__ ((__packed__)); + struct btrfs_extent_inline_ref { __u8 type; __le64 offset; @@ -1200,9 +1253,17 @@ static inline __u16 btrfs_qgroup_level(__u64 qgroupid) */ #define BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT (1ULL << 2) +/* + * Whether or not this filesystem is using simple quotas. Not exactly the + * incompat bit, because we support using simple quotas, disabling it, then + * going back to full qgroup quotas. + */ +#define BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE (1ULL << 3) + #define BTRFS_QGROUP_STATUS_FLAGS_MASK (BTRFS_QGROUP_STATUS_FLAG_ON | \ BTRFS_QGROUP_STATUS_FLAG_RESCAN | \ - BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT) + BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT | \ + BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE) #define BTRFS_QGROUP_STATUS_VERSION 1 @@ -1224,6 +1285,15 @@ struct btrfs_qgroup_status_item { * of the scan. It contains a logical address */ __le64 rescan; + + /* + * The generation when quotas were last enabled. Used by simple quotas to + * avoid decrementing when freeing an extent that was written before + * enable. + * + * Set only if flags contain BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE. + */ + __le64 enable_gen; } __attribute__ ((__packed__)); struct btrfs_qgroup_info_item { diff --git a/src/basic/linux/fou.h b/src/basic/linux/fou.h index 87c2c9f..b5cd3e7 100644 --- a/src/basic/linux/fou.h +++ b/src/basic/linux/fou.h @@ -1,32 +1,37 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* fou.h - FOU Interface */ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/fou.yaml */ +/* YNL-GEN uapi header */ #ifndef _UAPI_LINUX_FOU_H #define _UAPI_LINUX_FOU_H -/* NETLINK_GENERIC related info - */ #define FOU_GENL_NAME "fou" -#define FOU_GENL_VERSION 0x1 +#define FOU_GENL_VERSION 1 enum { - FOU_ATTR_UNSPEC, - FOU_ATTR_PORT, /* u16 */ - FOU_ATTR_AF, /* u8 */ - FOU_ATTR_IPPROTO, /* u8 */ - FOU_ATTR_TYPE, /* u8 */ - FOU_ATTR_REMCSUM_NOPARTIAL, /* flag */ - FOU_ATTR_LOCAL_V4, /* u32 */ - FOU_ATTR_LOCAL_V6, /* in6_addr */ - FOU_ATTR_PEER_V4, /* u32 */ - FOU_ATTR_PEER_V6, /* in6_addr */ - FOU_ATTR_PEER_PORT, /* u16 */ - FOU_ATTR_IFINDEX, /* s32 */ - - __FOU_ATTR_MAX, + FOU_ENCAP_UNSPEC, + FOU_ENCAP_DIRECT, + FOU_ENCAP_GUE, }; -#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1) +enum { + FOU_ATTR_UNSPEC, + FOU_ATTR_PORT, + FOU_ATTR_AF, + FOU_ATTR_IPPROTO, + FOU_ATTR_TYPE, + FOU_ATTR_REMCSUM_NOPARTIAL, + FOU_ATTR_LOCAL_V4, + FOU_ATTR_LOCAL_V6, + FOU_ATTR_PEER_V4, + FOU_ATTR_PEER_V6, + FOU_ATTR_PEER_PORT, + FOU_ATTR_IFINDEX, + + __FOU_ATTR_MAX +}; +#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1) enum { FOU_CMD_UNSPEC, @@ -34,15 +39,8 @@ enum { FOU_CMD_DEL, FOU_CMD_GET, - __FOU_CMD_MAX, + __FOU_CMD_MAX }; - -enum { - FOU_ENCAP_UNSPEC, - FOU_ENCAP_DIRECT, - FOU_ENCAP_GUE, -}; - -#define FOU_CMD_MAX (__FOU_CMD_MAX - 1) +#define FOU_CMD_MAX (__FOU_CMD_MAX - 1) #endif /* _UAPI_LINUX_FOU_H */ diff --git a/src/basic/linux/if_bridge.h b/src/basic/linux/if_bridge.h index d9de241..a5b743a 100644 --- a/src/basic/linux/if_bridge.h +++ b/src/basic/linux/if_bridge.h @@ -523,6 +523,9 @@ enum { BRIDGE_VLANDB_ENTRY_TUNNEL_INFO, BRIDGE_VLANDB_ENTRY_STATS, BRIDGE_VLANDB_ENTRY_MCAST_ROUTER, + BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS, + BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS, + BRIDGE_VLANDB_ENTRY_NEIGH_SUPPRESS, __BRIDGE_VLANDB_ENTRY_MAX, }; #define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1) @@ -631,6 +634,11 @@ enum { MDBA_MDB_EATTR_GROUP_MODE, MDBA_MDB_EATTR_SOURCE, MDBA_MDB_EATTR_RTPROT, + MDBA_MDB_EATTR_DST, + MDBA_MDB_EATTR_DST_PORT, + MDBA_MDB_EATTR_VNI, + MDBA_MDB_EATTR_IFINDEX, + MDBA_MDB_EATTR_SRC_VNI, __MDBA_MDB_EATTR_MAX }; #define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1) @@ -715,6 +723,24 @@ enum { }; #define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1) +/* [MDBA_GET_ENTRY] = { + * struct br_mdb_entry + * [MDBA_GET_ENTRY_ATTRS] = { + * [MDBE_ATTR_SOURCE] + * struct in_addr / struct in6_addr + * [MDBE_ATTR_SRC_VNI] + * u32 + * } + * } + */ +enum { + MDBA_GET_ENTRY_UNSPEC, + MDBA_GET_ENTRY, + MDBA_GET_ENTRY_ATTRS, + __MDBA_GET_ENTRY_MAX, +}; +#define MDBA_GET_ENTRY_MAX (__MDBA_GET_ENTRY_MAX - 1) + /* [MDBA_SET_ENTRY_ATTRS] = { * [MDBE_ATTR_xxx] * ... @@ -726,6 +752,12 @@ enum { MDBE_ATTR_SRC_LIST, MDBE_ATTR_GROUP_MODE, MDBE_ATTR_RTPROT, + MDBE_ATTR_DST, + MDBE_ATTR_DST_PORT, + MDBE_ATTR_VNI, + MDBE_ATTR_IFINDEX, + MDBE_ATTR_SRC_VNI, + MDBE_ATTR_STATE_MASK, __MDBE_ATTR_MAX, }; #define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1) diff --git a/src/basic/linux/if_link.h b/src/basic/linux/if_link.h index 1021a7e..ffa637b 100644 --- a/src/basic/linux/if_link.h +++ b/src/basic/linux/if_link.h @@ -374,6 +374,9 @@ enum { IFLA_DEVLINK_PORT, + IFLA_GSO_IPV4_MAX_SIZE, + IFLA_GRO_IPV4_MAX_SIZE, + IFLA_DPLL_PIN, __IFLA_MAX }; @@ -458,6 +461,286 @@ enum in6_addr_gen_mode { /* Bridge section */ +/** + * DOC: Bridge enum definition + * + * Please *note* that the timer values in the following section are expected + * in clock_t format, which is seconds multiplied by USER_HZ (generally + * defined as 100). + * + * @IFLA_BR_FORWARD_DELAY + * The bridge forwarding delay is the time spent in LISTENING state + * (before moving to LEARNING) and in LEARNING state (before moving + * to FORWARDING). Only relevant if STP is enabled. + * + * The valid values are between (2 * USER_HZ) and (30 * USER_HZ). + * The default value is (15 * USER_HZ). + * + * @IFLA_BR_HELLO_TIME + * The time between hello packets sent by the bridge, when it is a root + * bridge or a designated bridge. Only relevant if STP is enabled. + * + * The valid values are between (1 * USER_HZ) and (10 * USER_HZ). + * The default value is (2 * USER_HZ). + * + * @IFLA_BR_MAX_AGE + * The hello packet timeout is the time until another bridge in the + * spanning tree is assumed to be dead, after reception of its last hello + * message. Only relevant if STP is enabled. + * + * The valid values are between (6 * USER_HZ) and (40 * USER_HZ). + * The default value is (20 * USER_HZ). + * + * @IFLA_BR_AGEING_TIME + * Configure the bridge's FDB entries aging time. It is the time a MAC + * address will be kept in the FDB after a packet has been received from + * that address. After this time has passed, entries are cleaned up. + * Allow values outside the 802.1 standard specification for special cases: + * + * * 0 - entry never ages (all permanent) + * * 1 - entry disappears (no persistence) + * + * The default value is (300 * USER_HZ). + * + * @IFLA_BR_STP_STATE + * Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off + * (*IFLA_BR_STP_STATE* == 0) for this bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_PRIORITY + * Set this bridge's spanning tree priority, used during STP root bridge + * election. + * + * The valid values are between 0 and 65535. + * + * @IFLA_BR_VLAN_FILTERING + * Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off + * (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not + * consider the VLAN tag when handling packets. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_VLAN_PROTOCOL + * Set the protocol used for VLAN filtering. + * + * The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value + * is 0x8100(802.1Q). + * + * @IFLA_BR_GROUP_FWD_MASK + * The group forwarding mask. This is the bitmask that is applied to + * decide whether to forward incoming frames destined to link-local + * addresses (of the form 01:80:C2:00:00:0X). + * + * The default value is 0, which means the bridge does not forward any + * link-local frames coming on this port. + * + * @IFLA_BR_ROOT_ID + * The bridge root id, read only. + * + * @IFLA_BR_BRIDGE_ID + * The bridge id, read only. + * + * @IFLA_BR_ROOT_PORT + * The bridge root port, read only. + * + * @IFLA_BR_ROOT_PATH_COST + * The bridge root path cost, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE + * The bridge topology change, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED + * The bridge topology change detected, read only. + * + * @IFLA_BR_HELLO_TIMER + * The bridge hello timer, read only. + * + * @IFLA_BR_TCN_TIMER + * The bridge tcn timer, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE_TIMER + * The bridge topology change timer, read only. + * + * @IFLA_BR_GC_TIMER + * The bridge gc timer, read only. + * + * @IFLA_BR_GROUP_ADDR + * Set the MAC address of the multicast group this bridge uses for STP. + * The address must be a link-local address in standard Ethernet MAC address + * format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f]. + * + * The default value is 0. + * + * @IFLA_BR_FDB_FLUSH + * Flush bridge's fdb dynamic entries. + * + * @IFLA_BR_MCAST_ROUTER + * Set bridge's multicast router if IGMP snooping is enabled. + * The valid values are: + * + * * 0 - disabled. + * * 1 - automatic (queried). + * * 2 - permanently enabled. + * + * The default value is 1. + * + * @IFLA_BR_MCAST_SNOOPING + * Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off + * (*IFLA_BR_MCAST_SNOOPING* == 0). + * + * The default value is 1. + * + * @IFLA_BR_MCAST_QUERY_USE_IFADDR + * If enabled use the bridge's own IP address as source address for IGMP + * queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0 + * (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0). + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_QUERIER + * Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable + * (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast + * queries by the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_HASH_ELASTICITY + * Set multicast database hash elasticity, It is the maximum chain length in + * the multicast hash table. This attribute is *deprecated* and the value + * is always 16. + * + * @IFLA_BR_MCAST_HASH_MAX + * Set maximum size of the multicast hash table + * + * The default value is 4096, the value must be a power of 2. + * + * @IFLA_BR_MCAST_LAST_MEMBER_CNT + * The Last Member Query Count is the number of Group-Specific Queries + * sent before the router assumes there are no local members. The Last + * Member Query Count is also the number of Group-and-Source-Specific + * Queries sent before the router assumes there are no listeners for a + * particular source. + * + * The default value is 2. + * + * @IFLA_BR_MCAST_STARTUP_QUERY_CNT + * The Startup Query Count is the number of Queries sent out on startup, + * separated by the Startup Query Interval. + * + * The default value is 2. + * + * @IFLA_BR_MCAST_LAST_MEMBER_INTVL + * The Last Member Query Interval is the Max Response Time inserted into + * Group-Specific Queries sent in response to Leave Group messages, and + * is also the amount of time between Group-Specific Query messages. + * + * The default value is (1 * USER_HZ). + * + * @IFLA_BR_MCAST_MEMBERSHIP_INTVL + * The interval after which the bridge will leave a group, if no membership + * reports for this group are received. + * + * The default value is (260 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERIER_INTVL + * The interval between queries sent by other routers. if no queries are + * seen after this delay has passed, the bridge will start to send its own + * queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled). + * + * The default value is (255 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERY_INTVL + * The Query Interval is the interval between General Queries sent by + * the Querier. + * + * The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL + * The Max Response Time used to calculate the Max Resp Code inserted + * into the periodic General Queries. + * + * The default value is (10 * USER_HZ). + * + * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL + * The interval between queries in the startup phase. + * + * The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ). + * + * @IFLA_BR_NF_CALL_IPTABLES + * Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0) + * iptables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_NF_CALL_IP6TABLES + * Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0) + * ip6tables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_NF_CALL_ARPTABLES + * Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0) + * arptables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_VLAN_DEFAULT_PVID + * VLAN ID applied to untagged and priority-tagged incoming packets. + * + * The default value is 1. Setting to the special value 0 makes all ports of + * this bridge not have a PVID by default, which means that they will + * not accept VLAN-untagged traffic. + * + * @IFLA_BR_PAD + * Bridge attribute padding type for netlink message. + * + * @IFLA_BR_VLAN_STATS_ENABLED + * Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable + * (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_STATS_ENABLED + * Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable + * (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats + * accounting. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_IGMP_VERSION + * Set the IGMP version. + * + * The valid values are 2 and 3. The default value is 2. + * + * @IFLA_BR_MCAST_MLD_VERSION + * Set the MLD version. + * + * The valid values are 1 and 2. The default value is 1. + * + * @IFLA_BR_VLAN_STATS_PER_PORT + * Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable + * (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting. + * Can be changed only when there are no port VLANs configured. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MULTI_BOOLOPT + * The multi_boolopt is used to control new boolean options to avoid adding + * new netlink attributes. You can look at ``enum br_boolopt_id`` for those + * options. + * + * @IFLA_BR_MCAST_QUERIER_STATE + * Bridge mcast querier states, read only. + * + * @IFLA_BR_FDB_N_LEARNED + * The number of dynamically learned FDB entries for the current bridge, + * read only. + * + * @IFLA_BR_FDB_MAX_LEARNED + * Set the number of max dynamically learned FDB entries for the current + * bridge. + */ enum { IFLA_BR_UNSPEC, IFLA_BR_FORWARD_DELAY, @@ -507,6 +790,8 @@ enum { IFLA_BR_VLAN_STATS_PER_PORT, IFLA_BR_MULTI_BOOLOPT, IFLA_BR_MCAST_QUERIER_STATE, + IFLA_BR_FDB_N_LEARNED, + IFLA_BR_FDB_MAX_LEARNED, __IFLA_BR_MAX, }; @@ -517,11 +802,252 @@ struct ifla_bridge_id { __u8 addr[6]; /* ETH_ALEN */ }; +/** + * DOC: Bridge mode enum definition + * + * @BRIDGE_MODE_HAIRPIN + * Controls whether traffic may be sent back out of the port on which it + * was received. This option is also called reflective relay mode, and is + * used to support basic VEPA (Virtual Ethernet Port Aggregator) + * capabilities. By default, this flag is turned off and the bridge will + * not forward traffic back out of the receiving port. + */ enum { BRIDGE_MODE_UNSPEC, BRIDGE_MODE_HAIRPIN, }; +/** + * DOC: Bridge port enum definition + * + * @IFLA_BRPORT_STATE + * The operation state of the port. Here are the valid values. + * + * * 0 - port is in STP *DISABLED* state. Make this port completely + * inactive for STP. This is also called BPDU filter and could be used + * to disable STP on an untrusted port, like a leaf virtual device. + * The traffic forwarding is also stopped on this port. + * * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled + * on the bridge. In this state the port listens for STP BPDUs and + * drops all other traffic frames. + * * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on + * the bridge. In this state the port will accept traffic only for the + * purpose of updating MAC address tables. + * * 3 - port is in STP *FORWARDING* state. Port is fully active. + * * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on + * the bridge. This state is used during the STP election process. + * In this state, port will only process STP BPDUs. + * + * @IFLA_BRPORT_PRIORITY + * The STP port priority. The valid values are between 0 and 255. + * + * @IFLA_BRPORT_COST + * The STP path cost of the port. The valid values are between 1 and 65535. + * + * @IFLA_BRPORT_MODE + * Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details. + * + * @IFLA_BRPORT_GUARD + * Controls whether STP BPDUs will be processed by the bridge port. By + * default, the flag is turned off to allow BPDU processing. Turning this + * flag on will disable the bridge port if a STP BPDU packet is received. + * + * If the bridge has Spanning Tree enabled, hostile devices on the network + * may send BPDU on a port and cause network failure. Setting *guard on* + * will detect and stop this by disabling the port. The port will be + * restarted if the link is brought down, or removed and reattached. + * + * @IFLA_BRPORT_PROTECT + * Controls whether a given port is allowed to become a root port or not. + * Only used when STP is enabled on the bridge. By default the flag is off. + * + * This feature is also called root port guard. If BPDU is received from a + * leaf (edge) port, it should not be elected as root port. This could + * be used if using STP on a bridge and the downstream bridges are not fully + * trusted; this prevents a hostile guest from rerouting traffic. + * + * @IFLA_BRPORT_FAST_LEAVE + * This flag allows the bridge to immediately stop multicast traffic + * forwarding on a port that receives an IGMP Leave message. It is only used + * when IGMP snooping is enabled on the bridge. By default the flag is off. + * + * @IFLA_BRPORT_LEARNING + * Controls whether a given port will learn *source* MAC addresses from + * received traffic or not. Also controls whether dynamic FDB entries + * (which can also be added by software) will be refreshed by incoming + * traffic. By default this flag is on. + * + * @IFLA_BRPORT_UNICAST_FLOOD + * Controls whether unicast traffic for which there is no FDB entry will + * be flooded towards this port. By default this flag is on. + * + * @IFLA_BRPORT_PROXYARP + * Enable proxy ARP on this port. + * + * @IFLA_BRPORT_LEARNING_SYNC + * Controls whether a given port will sync MAC addresses learned on device + * port to bridge FDB. + * + * @IFLA_BRPORT_PROXYARP_WIFI + * Enable proxy ARP on this port which meets extended requirements by + * IEEE 802.11 and Hotspot 2.0 specifications. + * + * @IFLA_BRPORT_ROOT_ID + * + * @IFLA_BRPORT_BRIDGE_ID + * + * @IFLA_BRPORT_DESIGNATED_PORT + * + * @IFLA_BRPORT_DESIGNATED_COST + * + * @IFLA_BRPORT_ID + * + * @IFLA_BRPORT_NO + * + * @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK + * + * @IFLA_BRPORT_CONFIG_PENDING + * + * @IFLA_BRPORT_MESSAGE_AGE_TIMER + * + * @IFLA_BRPORT_FORWARD_DELAY_TIMER + * + * @IFLA_BRPORT_HOLD_TIMER + * + * @IFLA_BRPORT_FLUSH + * Flush bridge ports' fdb dynamic entries. + * + * @IFLA_BRPORT_MULTICAST_ROUTER + * Configure the port's multicast router presence. A port with + * a multicast router will receive all multicast traffic. + * The valid values are: + * + * * 0 disable multicast routers on this port + * * 1 let the system detect the presence of routers (default) + * * 2 permanently enable multicast traffic forwarding on this port + * * 3 enable multicast routers temporarily on this port, not depending + * on incoming queries. + * + * @IFLA_BRPORT_PAD + * + * @IFLA_BRPORT_MCAST_FLOOD + * Controls whether a given port will flood multicast traffic for which + * there is no MDB entry. By default this flag is on. + * + * @IFLA_BRPORT_MCAST_TO_UCAST + * Controls whether a given port will replicate packets using unicast + * instead of multicast. By default this flag is off. + * + * This is done by copying the packet per host and changing the multicast + * destination MAC to a unicast one accordingly. + * + * *mcast_to_unicast* works on top of the multicast snooping feature of the + * bridge. Which means unicast copies are only delivered to hosts which + * are interested in unicast and signaled this via IGMP/MLD reports previously. + * + * This feature is intended for interface types which have a more reliable + * and/or efficient way to deliver unicast packets than broadcast ones + * (e.g. WiFi). + * + * However, it should only be enabled on interfaces where no IGMPv2/MLDv1 + * report suppression takes place. IGMP/MLD report suppression issue is + * usually overcome by the network daemon (supplicant) enabling AP isolation + * and by that separating all STAs. + * + * Delivery of STA-to-STA IP multicast is made possible again by enabling + * and utilizing the bridge hairpin mode, which considers the incoming port + * as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option). + * Hairpin mode is performed after multicast snooping, therefore leading + * to only deliver reports to STAs running a multicast router. + * + * @IFLA_BRPORT_VLAN_TUNNEL + * Controls whether vlan to tunnel mapping is enabled on the port. + * By default this flag is off. + * + * @IFLA_BRPORT_BCAST_FLOOD + * Controls flooding of broadcast traffic on the given port. By default + * this flag is on. + * + * @IFLA_BRPORT_GROUP_FWD_MASK + * Set the group forward mask. This is a bitmask that is applied to + * decide whether to forward incoming frames destined to link-local + * addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults + * to 0, which means the bridge does not forward any link-local frames + * coming on this port). + * + * @IFLA_BRPORT_NEIGH_SUPPRESS + * Controls whether neighbor discovery (arp and nd) proxy and suppression + * is enabled on the port. By default this flag is off. + * + * @IFLA_BRPORT_ISOLATED + * Controls whether a given port will be isolated, which means it will be + * able to communicate with non-isolated ports only. By default this + * flag is off. + * + * @IFLA_BRPORT_BACKUP_PORT + * Set a backup port. If the port loses carrier all traffic will be + * redirected to the configured backup port. Set the value to 0 to disable + * it. + * + * @IFLA_BRPORT_MRP_RING_OPEN + * + * @IFLA_BRPORT_MRP_IN_OPEN + * + * @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT + * The number of per-port EHT hosts limit. The default value is 512. + * Setting to 0 is not allowed. + * + * @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT + * The current number of tracked hosts, read only. + * + * @IFLA_BRPORT_LOCKED + * Controls whether a port will be locked, meaning that hosts behind the + * port will not be able to communicate through the port unless an FDB + * entry with the unit's MAC address is in the FDB. The common use case is + * that hosts are allowed access through authentication with the IEEE 802.1X + * protocol or based on whitelists. By default this flag is off. + * + * Please note that secure 802.1X deployments should always use the + * *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its + * FDB based on link-local (EAPOL) traffic received on the port. + * + * @IFLA_BRPORT_MAB + * Controls whether a port will use MAC Authentication Bypass (MAB), a + * technique through which select MAC addresses may be allowed on a locked + * port, without using 802.1X authentication. Packets with an unknown source + * MAC address generates a "locked" FDB entry on the incoming bridge port. + * The common use case is for user space to react to these bridge FDB + * notifications and optionally replace the locked FDB entry with a normal + * one, allowing traffic to pass for whitelisted MAC addresses. + * + * Setting this flag also requires *IFLA_BRPORT_LOCKED* and + * *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized + * data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic + * FDB entries installed by user space (as replacements for the locked FDB + * entries) to be refreshed and/or aged out. + * + * @IFLA_BRPORT_MCAST_N_GROUPS + * + * @IFLA_BRPORT_MCAST_MAX_GROUPS + * Sets the maximum number of MDB entries that can be registered for a + * given port. Attempts to register more MDB entries at the port than this + * limit allows will be rejected, whether they are done through netlink + * (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a + * limit of 0 disables the limit. The default value is 0. + * + * @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS + * Controls whether neighbor discovery (arp and nd) proxy and suppression is + * enabled for a given port. By default this flag is off. + * + * Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS* + * is enabled for a given port. + * + * @IFLA_BRPORT_BACKUP_NHID + * The FDB nexthop object ID to attach to packets being redirected to a + * backup port that has VLAN tunnel mapping enabled (via the + * *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has + * the effect of not attaching any ID. + */ enum { IFLA_BRPORT_UNSPEC, IFLA_BRPORT_STATE, /* Spanning tree state */ @@ -564,6 +1090,10 @@ enum { IFLA_BRPORT_MCAST_EHT_HOSTS_CNT, IFLA_BRPORT_LOCKED, IFLA_BRPORT_MAB, + IFLA_BRPORT_MCAST_N_GROUPS, + IFLA_BRPORT_MCAST_MAX_GROUPS, + IFLA_BRPORT_NEIGH_VLAN_SUPPRESS, + IFLA_BRPORT_BACKUP_NHID, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -630,6 +1160,7 @@ enum { IFLA_MACVLAN_MACADDR_COUNT, IFLA_MACVLAN_BC_QUEUE_LEN, IFLA_MACVLAN_BC_QUEUE_LEN_USED, + IFLA_MACVLAN_BC_CUTOFF, __IFLA_MACVLAN_MAX, }; @@ -748,6 +1279,30 @@ struct tunnel_msg { __u32 ifindex; }; +/* netkit section */ +enum netkit_action { + NETKIT_NEXT = -1, + NETKIT_PASS = 0, + NETKIT_DROP = 2, + NETKIT_REDIRECT = 7, +}; + +enum netkit_mode { + NETKIT_L2, + NETKIT_L3, +}; + +enum { + IFLA_NETKIT_UNSPEC, + IFLA_NETKIT_PEER_INFO, + IFLA_NETKIT_PRIMARY, + IFLA_NETKIT_POLICY, + IFLA_NETKIT_PEER_POLICY, + IFLA_NETKIT_MODE, + __IFLA_NETKIT_MAX, +}; +#define IFLA_NETKIT_MAX (__IFLA_NETKIT_MAX - 1) + /* VXLAN section */ /* include statistics in the dump */ @@ -821,6 +1376,8 @@ enum { IFLA_VXLAN_TTL_INHERIT, IFLA_VXLAN_DF, IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */ + IFLA_VXLAN_LOCALBYPASS, + IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */ __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) @@ -838,6 +1395,13 @@ enum ifla_vxlan_df { VXLAN_DF_MAX = __VXLAN_DF_END - 1, }; +enum ifla_vxlan_label_policy { + VXLAN_LABEL_FIXED = 0, + VXLAN_LABEL_INHERIT = 1, + __VXLAN_LABEL_END, + VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1, +}; + /* GENEVE section */ enum { IFLA_GENEVE_UNSPEC, @@ -941,6 +1505,7 @@ enum { IFLA_BOND_AD_LACP_ACTIVE, IFLA_BOND_MISSED_MAX, IFLA_BOND_NS_IP6_TARGET, + IFLA_BOND_COUPLED_CONTROL, __IFLA_BOND_MAX, }; @@ -1383,7 +1948,9 @@ enum { enum { IFLA_DSA_UNSPEC, - IFLA_DSA_MASTER, + IFLA_DSA_CONDUIT, + /* Deprecated, use IFLA_DSA_CONDUIT instead */ + IFLA_DSA_MASTER = IFLA_DSA_CONDUIT, __IFLA_DSA_MAX, }; diff --git a/src/basic/linux/in.h b/src/basic/linux/in.h index 07a4cb1..e682ab6 100644 --- a/src/basic/linux/in.h +++ b/src/basic/linux/in.h @@ -162,6 +162,8 @@ struct in_addr { #define MCAST_MSFILTER 48 #define IP_MULTICAST_ALL 49 #define IP_UNICAST_IF 50 +#define IP_LOCAL_PORT_RANGE 51 +#define IP_PROTOCOL 52 #define MCAST_EXCLUDE 0 #define MCAST_INCLUDE 1 diff --git a/src/basic/linux/in6.h b/src/basic/linux/in6.h index c4c53a9..ff8d21f 100644 --- a/src/basic/linux/in6.h +++ b/src/basic/linux/in6.h @@ -145,7 +145,7 @@ struct in6_flowlabel_req { #define IPV6_TLV_PADN 1 #define IPV6_TLV_ROUTERALERT 5 #define IPV6_TLV_CALIPSO 7 /* RFC 5570 */ -#define IPV6_TLV_IOAM 49 /* TEMPORARY IANA allocation for IOAM */ +#define IPV6_TLV_IOAM 49 /* RFC 9486 */ #define IPV6_TLV_JUMBO 194 #define IPV6_TLV_HAO 201 /* home address option */ diff --git a/src/basic/linux/magic.h b/src/basic/linux/magic.h new file mode 100644 index 0000000..1b40a96 --- /dev/null +++ b/src/basic/linux/magic.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_MAGIC_H__ +#define __LINUX_MAGIC_H__ + +#define ADFS_SUPER_MAGIC 0xadf5 +#define AFFS_SUPER_MAGIC 0xadff +#define AFS_SUPER_MAGIC 0x5346414F +#define AUTOFS_SUPER_MAGIC 0x0187 +#define CEPH_SUPER_MAGIC 0x00c36400 +#define CODA_SUPER_MAGIC 0x73757245 +#define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ +#define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ +#define DEBUGFS_MAGIC 0x64626720 +#define SECURITYFS_MAGIC 0x73636673 +#define SELINUX_MAGIC 0xf97cff8c +#define SMACK_MAGIC 0x43415d53 /* "SMAC" */ +#define RAMFS_MAGIC 0x858458f6 /* some random number */ +#define TMPFS_MAGIC 0x01021994 +#define HUGETLBFS_MAGIC 0x958458f6 /* some random number */ +#define SQUASHFS_MAGIC 0x73717368 +#define ECRYPTFS_SUPER_MAGIC 0xf15f +#define EFS_SUPER_MAGIC 0x414A53 +#define EROFS_SUPER_MAGIC_V1 0xE0F5E1E2 +#define EXT2_SUPER_MAGIC 0xEF53 +#define EXT3_SUPER_MAGIC 0xEF53 +#define XENFS_SUPER_MAGIC 0xabba1974 +#define EXT4_SUPER_MAGIC 0xEF53 +#define BTRFS_SUPER_MAGIC 0x9123683E +#define NILFS_SUPER_MAGIC 0x3434 +#define F2FS_SUPER_MAGIC 0xF2F52010 +#define HPFS_SUPER_MAGIC 0xf995e849 +#define ISOFS_SUPER_MAGIC 0x9660 +#define JFFS2_SUPER_MAGIC 0x72b6 +#define XFS_SUPER_MAGIC 0x58465342 /* "XFSB" */ +#define PSTOREFS_MAGIC 0x6165676C +#define EFIVARFS_MAGIC 0xde5e81e4 +#define HOSTFS_SUPER_MAGIC 0x00c0ffee +#define OVERLAYFS_SUPER_MAGIC 0x794c7630 +#define FUSE_SUPER_MAGIC 0x65735546 + +#define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ +#define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ +#define MINIX2_SUPER_MAGIC 0x2468 /* minix v2 fs, 14 char names */ +#define MINIX2_SUPER_MAGIC2 0x2478 /* minix v2 fs, 30 char names */ +#define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */ + +#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */ +#define EXFAT_SUPER_MAGIC 0x2011BAB0 +#define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */ +#define NFS_SUPER_MAGIC 0x6969 +#define OCFS2_SUPER_MAGIC 0x7461636f +#define OPENPROM_SUPER_MAGIC 0x9fa1 +#define QNX4_SUPER_MAGIC 0x002f /* qnx4 fs detection */ +#define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */ +#define AFS_FS_MAGIC 0x6B414653 + + +#define REISERFS_SUPER_MAGIC 0x52654973 /* used by gcc */ + /* used by file system utilities that + look at the superblock, etc. */ +#define REISERFS_SUPER_MAGIC_STRING "ReIsErFs" +#define REISER2FS_SUPER_MAGIC_STRING "ReIsEr2Fs" +#define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs" + +#define SMB_SUPER_MAGIC 0x517B +#define CIFS_SUPER_MAGIC 0xFF534D42 /* the first four bytes of SMB PDUs */ +#define SMB2_SUPER_MAGIC 0xFE534D42 + +#define CGROUP_SUPER_MAGIC 0x27e0eb +#define CGROUP2_SUPER_MAGIC 0x63677270 + +#define RDTGROUP_SUPER_MAGIC 0x7655821 + +#define STACK_END_MAGIC 0x57AC6E9D + +#define TRACEFS_MAGIC 0x74726163 + +#define V9FS_MAGIC 0x01021997 + +#define BDEVFS_MAGIC 0x62646576 +#define DAXFS_MAGIC 0x64646178 +#define BINFMTFS_MAGIC 0x42494e4d +#define DEVPTS_SUPER_MAGIC 0x1cd1 +#define BINDERFS_SUPER_MAGIC 0x6c6f6f70 +#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA +#define PIPEFS_MAGIC 0x50495045 +#define PROC_SUPER_MAGIC 0x9fa0 +#define SOCKFS_MAGIC 0x534F434B +#define SYSFS_MAGIC 0x62656572 +#define USBDEVICE_SUPER_MAGIC 0x9fa2 +#define MTD_INODE_FS_MAGIC 0x11307854 +#define ANON_INODE_FS_MAGIC 0x09041934 +#define BTRFS_TEST_MAGIC 0x73727279 +#define NSFS_MAGIC 0x6e736673 +#define BPF_FS_MAGIC 0xcafe4a11 +#define AAFS_MAGIC 0x5a3c69f0 +#define ZONEFS_MAGIC 0x5a4f4653 + +/* Since UDF 2.01 is ISO 13346 based... */ +#define UDF_SUPER_MAGIC 0x15013346 +#define DMA_BUF_MAGIC 0x444d4142 /* "DMAB" */ +#define DEVMEM_MAGIC 0x454d444d /* "DMEM" */ +#define SECRETMEM_MAGIC 0x5345434d /* "SECM" */ +#define PID_FS_MAGIC 0x50494446 /* "PIDF" */ + +#endif /* __LINUX_MAGIC_H__ */ diff --git a/src/basic/linux/netfilter.h b/src/basic/linux/netfilter.h new file mode 100644 index 0000000..30c045b --- /dev/null +++ b/src/basic/linux/netfilter.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_NETFILTER_H +#define __LINUX_NETFILTER_H + +#include + +#include +#include + +/* Responses from hook functions. */ +#define NF_DROP 0 +#define NF_ACCEPT 1 +#define NF_STOLEN 2 +#define NF_QUEUE 3 +#define NF_REPEAT 4 +#define NF_STOP 5 /* Deprecated, for userspace nf_queue compatibility. */ +#define NF_MAX_VERDICT NF_STOP + +/* we overload the higher bits for encoding auxiliary data such as the queue + * number or errno values. Not nice, but better than additional function + * arguments. */ +#define NF_VERDICT_MASK 0x000000ff + +/* extra verdict flags have mask 0x0000ff00 */ +#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000 + +/* queue number (NF_QUEUE) or errno (NF_DROP) */ +#define NF_VERDICT_QMASK 0xffff0000 +#define NF_VERDICT_QBITS 16 + +#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE) + +#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP) + +/* only for userspace compatibility */ + +/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */ +#define NF_VERDICT_BITS 16 + +enum nf_inet_hooks { + NF_INET_PRE_ROUTING, + NF_INET_LOCAL_IN, + NF_INET_FORWARD, + NF_INET_LOCAL_OUT, + NF_INET_POST_ROUTING, + NF_INET_NUMHOOKS, + NF_INET_INGRESS = NF_INET_NUMHOOKS, +}; + +enum nf_dev_hooks { + NF_NETDEV_INGRESS, + NF_NETDEV_EGRESS, + NF_NETDEV_NUMHOOKS +}; + +enum { + NFPROTO_UNSPEC = 0, + NFPROTO_INET = 1, + NFPROTO_IPV4 = 2, + NFPROTO_ARP = 3, + NFPROTO_NETDEV = 5, + NFPROTO_BRIDGE = 7, + NFPROTO_IPV6 = 10, + NFPROTO_DECNET = 12, + NFPROTO_NUMPROTO, +}; + +union nf_inet_addr { + __u32 all[4]; + __be32 ip; + __be32 ip6[4]; + struct in_addr in; + struct in6_addr in6; +}; + +#endif /* __LINUX_NETFILTER_H */ diff --git a/src/basic/linux/netfilter/nf_tables.h b/src/basic/linux/netfilter/nf_tables.h index cfa844d..aa4094c 100644 --- a/src/basic/linux/netfilter/nf_tables.h +++ b/src/basic/linux/netfilter/nf_tables.h @@ -98,6 +98,14 @@ enum nft_verdicts { * @NFT_MSG_GETFLOWTABLE: get flow table (enum nft_flowtable_attributes) * @NFT_MSG_DELFLOWTABLE: delete flow table (enum nft_flowtable_attributes) * @NFT_MSG_GETRULE_RESET: get rules and reset stateful expressions (enum nft_obj_attributes) + * @NFT_MSG_DESTROYTABLE: destroy a table (enum nft_table_attributes) + * @NFT_MSG_DESTROYCHAIN: destroy a chain (enum nft_chain_attributes) + * @NFT_MSG_DESTROYRULE: destroy a rule (enum nft_rule_attributes) + * @NFT_MSG_DESTROYSET: destroy a set (enum nft_set_attributes) + * @NFT_MSG_DESTROYSETELEM: destroy a set element (enum nft_set_elem_attributes) + * @NFT_MSG_DESTROYOBJ: destroy a stateful object (enum nft_object_attributes) + * @NFT_MSG_DESTROYFLOWTABLE: destroy flow table (enum nft_flowtable_attributes) + * @NFT_MSG_GETSETELEM_RESET: get set elements and reset attached stateful expressions (enum nft_set_elem_attributes) */ enum nf_tables_msg_types { NFT_MSG_NEWTABLE, @@ -126,6 +134,14 @@ enum nf_tables_msg_types { NFT_MSG_GETFLOWTABLE, NFT_MSG_DELFLOWTABLE, NFT_MSG_GETRULE_RESET, + NFT_MSG_DESTROYTABLE, + NFT_MSG_DESTROYCHAIN, + NFT_MSG_DESTROYRULE, + NFT_MSG_DESTROYSET, + NFT_MSG_DESTROYSETELEM, + NFT_MSG_DESTROYOBJ, + NFT_MSG_DESTROYFLOWTABLE, + NFT_MSG_GETSETELEM_RESET, NFT_MSG_MAX, }; @@ -163,13 +179,17 @@ enum nft_hook_attributes { * enum nft_table_flags - nf_tables table flags * * @NFT_TABLE_F_DORMANT: this table is not active + * @NFT_TABLE_F_OWNER: this table is owned by a process + * @NFT_TABLE_F_PERSIST: this table shall outlive its owner */ enum nft_table_flags { NFT_TABLE_F_DORMANT = 0x1, NFT_TABLE_F_OWNER = 0x2, + NFT_TABLE_F_PERSIST = 0x4, }; #define NFT_TABLE_F_MASK (NFT_TABLE_F_DORMANT | \ - NFT_TABLE_F_OWNER) + NFT_TABLE_F_OWNER | \ + NFT_TABLE_F_PERSIST) /** * enum nft_table_attributes - nf_tables table netlink attributes @@ -247,6 +267,7 @@ enum nft_chain_attributes { * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN) * @NFTA_RULE_ID: uniquely identifies a rule in a transaction (NLA_U32) * @NFTA_RULE_POSITION_ID: transaction unique identifier of the previous rule (NLA_U32) + * @NFTA_RULE_CHAIN_ID: add the rule to chain by ID, alternative to @NFTA_RULE_CHAIN (NLA_U32) */ enum nft_rule_attributes { NFTA_RULE_UNSPEC, @@ -268,9 +289,11 @@ enum nft_rule_attributes { /** * enum nft_rule_compat_flags - nf_tables rule compat flags * + * @NFT_RULE_COMPAT_F_UNUSED: unused * @NFT_RULE_COMPAT_F_INV: invert the check result */ enum nft_rule_compat_flags { + NFT_RULE_COMPAT_F_UNUSED = (1 << 0), NFT_RULE_COMPAT_F_INV = (1 << 1), NFT_RULE_COMPAT_F_MASK = NFT_RULE_COMPAT_F_INV, }; @@ -671,7 +694,7 @@ enum nft_range_ops { * enum nft_range_attributes - nf_tables range expression netlink attributes * * @NFTA_RANGE_SREG: source register of data to compare (NLA_U32: nft_registers) - * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_cmp_ops) + * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_range_ops) * @NFTA_RANGE_FROM_DATA: data range from (NLA_NESTED: nft_data_attributes) * @NFTA_RANGE_TO_DATA: data range to (NLA_NESTED: nft_data_attributes) */ @@ -845,12 +868,14 @@ enum nft_exthdr_flags { * @NFT_EXTHDR_OP_TCP: match against tcp options * @NFT_EXTHDR_OP_IPV4: match against ipv4 options * @NFT_EXTHDR_OP_SCTP: match against sctp chunks + * @NFT_EXTHDR_OP_DCCP: match against dccp otions */ enum nft_exthdr_op { NFT_EXTHDR_OP_IPV6, NFT_EXTHDR_OP_TCPOPT, NFT_EXTHDR_OP_IPV4, NFT_EXTHDR_OP_SCTP, + NFT_EXTHDR_OP_DCCP, __NFT_EXTHDR_OP_MAX }; #define NFT_EXTHDR_OP_MAX (__NFT_EXTHDR_OP_MAX - 1) @@ -864,7 +889,7 @@ enum nft_exthdr_op { * @NFTA_EXTHDR_LEN: extension header length (NLA_U32) * @NFTA_EXTHDR_FLAGS: extension header flags (NLA_U32) * @NFTA_EXTHDR_OP: option match type (NLA_U32) - * @NFTA_EXTHDR_SREG: option match type (NLA_U32) + * @NFTA_EXTHDR_SREG: source register (NLA_U32: nft_registers) */ enum nft_exthdr_attributes { NFTA_EXTHDR_UNSPEC, @@ -917,6 +942,7 @@ enum nft_exthdr_attributes { * @NFT_META_TIME_HOUR: hour of day (in seconds) * @NFT_META_SDIF: slave device interface index * @NFT_META_SDIFNAME: slave device interface name + * @NFT_META_BRI_BROUTE: packet br_netfilter_broute bit */ enum nft_meta_keys { NFT_META_LEN, @@ -955,6 +981,7 @@ enum nft_meta_keys { NFT_META_TIME_HOUR, NFT_META_SDIF, NFT_META_SDIFNAME, + NFT_META_BRI_BROUTE, __NFT_META_IIFTYPE, }; @@ -1246,10 +1273,10 @@ enum nft_last_attributes { /** * enum nft_log_attributes - nf_tables log expression netlink attributes * - * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32) + * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U16) * @NFTA_LOG_PREFIX: prefix to prepend to log messages (NLA_STRING) * @NFTA_LOG_SNAPLEN: length of payload to include in netlink message (NLA_U32) - * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U32) + * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U16) * @NFTA_LOG_LEVEL: log level (NLA_U32) * @NFTA_LOG_FLAGS: logging flags (NLA_U32) */ diff --git a/src/basic/linux/netlink.h b/src/basic/linux/netlink.h index e2ae82e..f87aaf2 100644 --- a/src/basic/linux/netlink.h +++ b/src/basic/linux/netlink.h @@ -298,6 +298,8 @@ struct nla_bitfield32 { * entry has attributes again, the policy for those inner ones * and the corresponding maxtype may be specified. * @NL_ATTR_TYPE_BITFIELD32: &struct nla_bitfield32 attribute + * @NL_ATTR_TYPE_SINT: 32-bit or 64-bit signed attribute, aligned to 4B + * @NL_ATTR_TYPE_UINT: 32-bit or 64-bit unsigned attribute, aligned to 4B */ enum netlink_attribute_type { NL_ATTR_TYPE_INVALID, @@ -322,6 +324,9 @@ enum netlink_attribute_type { NL_ATTR_TYPE_NESTED_ARRAY, NL_ATTR_TYPE_BITFIELD32, + + NL_ATTR_TYPE_SINT, + NL_ATTR_TYPE_UINT, }; /** diff --git a/src/basic/linux/nexthop.h b/src/basic/linux/nexthop.h index d8ffa8c..dd8787f 100644 --- a/src/basic/linux/nexthop.h +++ b/src/basic/linux/nexthop.h @@ -30,6 +30,9 @@ enum { #define NEXTHOP_GRP_TYPE_MAX (__NEXTHOP_GRP_TYPE_MAX - 1) +#define NHA_OP_FLAG_DUMP_STATS BIT(0) +#define NHA_OP_FLAG_DUMP_HW_STATS BIT(1) + enum { NHA_UNSPEC, NHA_ID, /* u32; id for nexthop. id == 0 means auto-assign */ @@ -60,6 +63,18 @@ enum { /* nested; nexthop bucket attributes */ NHA_RES_BUCKET, + /* u32; operation-specific flags */ + NHA_OP_FLAGS, + + /* nested; nexthop group stats */ + NHA_GROUP_STATS, + + /* u32; nexthop hardware stats enable */ + NHA_HW_STATS_ENABLE, + + /* u32; read-only; whether any driver collects HW stats */ + NHA_HW_STATS_USED, + __NHA_MAX, }; @@ -101,4 +116,34 @@ enum { #define NHA_RES_BUCKET_MAX (__NHA_RES_BUCKET_MAX - 1) +enum { + NHA_GROUP_STATS_UNSPEC, + + /* nested; nexthop group entry stats */ + NHA_GROUP_STATS_ENTRY, + + __NHA_GROUP_STATS_MAX, +}; + +#define NHA_GROUP_STATS_MAX (__NHA_GROUP_STATS_MAX - 1) + +enum { + NHA_GROUP_STATS_ENTRY_UNSPEC, + + /* u32; nexthop id of the nexthop group entry */ + NHA_GROUP_STATS_ENTRY_ID, + + /* uint; number of packets forwarded via the nexthop group entry */ + NHA_GROUP_STATS_ENTRY_PACKETS, + + /* uint; number of packets forwarded via the nexthop group entry in + * hardware + */ + NHA_GROUP_STATS_ENTRY_PACKETS_HW, + + __NHA_GROUP_STATS_ENTRY_MAX, +}; + +#define NHA_GROUP_STATS_ENTRY_MAX (__NHA_GROUP_STATS_ENTRY_MAX - 1) + #endif diff --git a/src/basic/linux/nl80211.h b/src/basic/linux/nl80211.h index c14a91b..f23ecbd 100644 --- a/src/basic/linux/nl80211.h +++ b/src/basic/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2022 Intel Corporation + * Copyright (C) 2018-2024 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -72,7 +72,7 @@ * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: * - a setup station entry is added, not yet authorized, without any rate - * or capability information, this just exists to avoid race conditions + * or capability information; this just exists to avoid race conditions * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid * to add rate and capability information to the station and at the same * time mark it authorized. @@ -87,7 +87,7 @@ * DOC: Frame transmission/registration support * * Frame transmission and registration support exists to allow userspace - * management entities such as wpa_supplicant react to management frames + * management entities such as wpa_supplicant to react to management frames * that are not being handled by the kernel. This includes, for example, * certain classes of action frames that cannot be handled in the kernel * for various reasons. @@ -113,7 +113,7 @@ * * Frame transmission allows userspace to send for example the required * responses to action frames. It is subject to some sanity checking, - * but many frames can be transmitted. When a frame was transmitted, its + * but many frames can be transmitted. When a frame is transmitted, its * status is indicated to the sending socket. * * For more technical details, see the corresponding command descriptions @@ -123,7 +123,7 @@ /** * DOC: Virtual interface / concurrency capabilities * - * Some devices are able to operate with virtual MACs, they can have + * Some devices are able to operate with virtual MACs; they can have * more than one virtual interface. The capability handling for this * is a bit complex though, as there may be a number of restrictions * on the types of concurrency that are supported. @@ -135,7 +135,7 @@ * Once concurrency is desired, more attributes must be observed: * To start with, since some interface types are purely managed in * software, like the AP-VLAN type in mac80211 for example, there's - * an additional list of these, they can be added at any time and + * an additional list of these; they can be added at any time and * are only restricted by some semantic restrictions (e.g. AP-VLAN * cannot be added without a corresponding AP interface). This list * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. @@ -164,17 +164,17 @@ * Packet coalesce feature helps to reduce number of received interrupts * to host by buffering these packets in firmware/hardware for some * predefined time. Received interrupt will be generated when one of the - * following events occur. + * following events occurs. * a) Expiration of hardware timer whose expiration time is set to maximum * coalescing delay of matching coalesce rule. - * b) Coalescing buffer in hardware reaches it's limit. + * b) Coalescing buffer in hardware reaches its limit. * c) Packet doesn't match any of the configured coalesce rules. * * User needs to configure following parameters for creating a coalesce * rule. * a) Maximum coalescing delay * b) List of packet patterns which needs to be matched - * c) Condition for coalescence. pattern 'match' or 'no match' + * c) Condition for coalescence: pattern 'match' or 'no match' * Multiple such rules can be created. */ @@ -213,7 +213,7 @@ /** * DOC: FILS shared key authentication offload * - * FILS shared key authentication offload can be advertized by drivers by + * FILS shared key authentication offload can be advertised by drivers by * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support * FILS shared key authentication offload should be able to construct the * authentication and association frames for FILS shared key authentication and @@ -239,7 +239,7 @@ * The PMKSA can be maintained in userspace persistently so that it can be used * later after reboots or wifi turn off/on also. * - * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS + * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS * capable AP supporting PMK caching. It specifies the scope within which the * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based @@ -290,12 +290,12 @@ * If the configuration needs to be applied for specific peer then the MAC * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the * configuration will be applied for all the connected peers in the vif except - * any peers that have peer specific configuration for the TID by default; if - * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values + * any peers that have peer-specific configuration for the TID by default; if + * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values * will be overwritten. * - * All this configuration is valid only for STA's current connection - * i.e. the configuration will be reset to default when the STA connects back + * All this configuration is valid only for STA's current connection, + * i.e., the configuration will be reset to default when the STA connects back * after disconnection/roaming, and this configuration will be cleared when * the interface goes down. */ @@ -326,7 +326,7 @@ /** * DOC: Multi-Link Operation * - * In Multi-Link Operation, a connection between to MLDs utilizes multiple + * In Multi-Link Operation, a connection between two MLDs utilizes multiple * links. To use this in nl80211, various commands and responses now need * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. * Additionally, various commands that need to operate on a specific link @@ -334,6 +334,15 @@ * use %NL80211_CMD_START_AP or similar functions. */ +/** + * DOC: OWE DH IE handling offload + * + * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate + * kernel/application space to avoid DH IE handling. When this flag is + * advertised, the driver/device will take care of DH IE inclusion and + * processing of peer DH IE to generate PMK. + */ + /** * enum nl80211_commands - supported nl80211 commands * @@ -424,11 +433,13 @@ * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified - * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and + * by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in + * %NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type * of disconnection indication should be sent to the station * (Deauthentication or Disassociation frame and reason code for that - * frame). + * frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove + * stations connected and using at least that link as one of its links. * * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to * destination %NL80211_ATTR_MAC on the interface identified by @@ -511,7 +522,7 @@ * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, * scheduled scan will run in an infinite loop with the specified interval. - * These attributes are mutually exculsive, + * These attributes are mutually exclusive, * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if * NL80211_ATTR_SCHED_SCAN_PLANS is defined. * If for some reason scheduled scan is aborted by the driver, all scan @@ -542,7 +553,7 @@ * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface * is brought down while a scheduled scan was running. * - * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation * or noise level * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) @@ -553,12 +564,13 @@ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier - * advertized by a FILS capable AP identifying the scope of PMKSA in an + * advertised by a FILS capable AP identifying the scope of PMKSA in an * ESS. * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS - * authentication. + * authentication. Additionally in case of SAE offload and OWE offloads + * PMKSA entry can be deleted using %NL80211_ATTR_SSID. * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain @@ -597,7 +609,7 @@ * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify * the SSID (mainly for association, but is included in authentication * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + - * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the * authentication type. %NL80211_ATTR_IE is used to define IEs * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added @@ -806,7 +818,7 @@ * reached. * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ * and the attributes determining channel width) the given interface - * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. + * (identified by %NL80211_ATTR_IFINDEX) shall operate on. * In case multiple channels are supported by the device, the mechanism * with which it switches channels is implementation-defined. * When a monitor interface is given, it can only switch channel while @@ -878,7 +890,7 @@ * inform userspace of the new replay counter. * * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace - * of PMKSA caching dandidates. + * of PMKSA caching candidates. * * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). * In addition, this can be used as an event to request userspace to take @@ -914,7 +926,7 @@ * * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface * by sending a null data frame to it and reporting when the frame is - * acknowleged. This is used to allow timing out inactive clients. Uses + * acknowledged. This is used to allow timing out inactive clients. Uses * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a * direct reply with an %NL80211_ATTR_COOKIE that is later used to match * up the event with the request. The event includes the same data and @@ -1125,11 +1137,15 @@ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously * configured PMK for the authenticator address identified by * %NL80211_ATTR_MAC. - * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was - * completed successfully. Drivers that support 4 way handshake offload - * should send this event after indicating 802.1X FT assocation with - * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT - * should be indicated instead. + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and + * open for regular data traffic. For STA/P2P-client, this event is sent + * with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P- + * client MAC address. + * Drivers that support 4 way handshake offload should send this event for + * STA/P2P-client after successful 4-way HS or after 802.1X FT following + * NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way + * handshake offload should send this event on successful completion of + * 4-way handshake with the peer (STA/P2P-client). * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request * and RX notification. This command is used both as a request to transmit * a control port frame and as a notification that a control port frame @@ -1166,6 +1182,23 @@ * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH * command interface. * + * Host driver sends MLD address of the AP with %NL80211_ATTR_MLD_ADDR in + * %NL80211_CMD_EXTERNAL_AUTH event to indicate user space to enable MLO + * during the authentication offload in STA mode while connecting to MLD + * APs. Host driver should check %NL80211_ATTR_MLO_SUPPORT flag capability + * in %NL80211_CMD_CONNECT to know whether the user space supports enabling + * MLO during the authentication offload or not. + * User space should enable MLO during the authentication only when it + * receives the AP MLD address in authentication offload request. User + * space shouldn't enable MLO when the authentication offload request + * doesn't indicate the AP MLD address even if the AP is MLO capable. + * User space should use %NL80211_ATTR_MLD_ADDR as peer's MLD address and + * interface address identified by %NL80211_ATTR_IFINDEX as self MLD + * address. User space and host driver to use MLD addresses in RA, TA and + * BSSID fields of the frames between them, and host driver translates the + * MLD addresses to/from link addresses based on the link chosen for the + * authentication. + * * Host driver reports this status on an authentication failure to the * user space through the connect result as the user space would have * initiated the connection through the connect request. @@ -1281,6 +1314,26 @@ * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station * + * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing + * measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC + * is included, enable/disable HW timestamping only for frames to/from the + * specified MAC address. Otherwise enable/disable HW timestamping for + * all TM/FTM frames (including ones that were enabled with specific MAC + * address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable + * HW timestamping. + * The number of peers that HW timestamping can be enabled for concurrently + * is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS. + * + * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD + * setup links due to AP MLD removing the corresponding affiliated APs with + * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide + * information about the removed STA MLD setup links. + * + * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a + * non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and + * %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the + * TID to Link mapping for downlink/uplink traffic. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1532,6 +1585,12 @@ enum nl80211_commands { NL80211_CMD_MODIFY_LINK_STA, NL80211_CMD_REMOVE_LINK_STA, + NL80211_CMD_SET_HW_TIMESTAMP, + + NL80211_CMD_LINKS_REMOVED, + + NL80211_CMD_SET_TID_TO_LINK_MAPPING, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1789,7 +1848,7 @@ enum nl80211_commands { * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth - * frames are not forwared over the control port. + * frames are not forwarded over the control port. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -1926,10 +1985,10 @@ enum nl80211_commands { * bit. Depending on which antennas are selected in the bitmap, 802.11n * drivers can derive which chainmasks to use (if all antennas belonging to * a particular chain are disabled this chain should be disabled) and if - * a chain has diversity antennas wether diversity should be used or not. + * a chain has diversity antennas whether diversity should be used or not. * HT capabilities (STBC, TX Beamforming, Antenna selection) can be * derived from the available chains after applying the antenna mask. - * Non-802.11n drivers can derive wether to use diversity or not. + * Non-802.11n drivers can derive whether to use diversity or not. * Drivers may reject configurations or RX/TX mask combinations they cannot * support by returning -EINVAL. * @@ -2499,7 +2558,7 @@ enum nl80211_commands { * from successful FILS authentication and is used with * %NL80211_CMD_CONNECT. * - * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP + * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP * identifying the scope of PMKSAs. This is used with * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. * @@ -2653,11 +2712,13 @@ enum nl80211_commands { * * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS * discovery. It is a nested attribute, see - * &enum nl80211_fils_discovery_attributes. + * &enum nl80211_fils_discovery_attributes. Userspace should pass an empty + * nested attribute to disable this feature and delete the templates. * * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure * unsolicited broadcast probe response. It is a nested attribute, see - * &enum nl80211_unsol_bcast_probe_resp_attributes. + * &enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty + * nested attribute to disable this feature and delete the templates. * * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) @@ -2751,6 +2812,50 @@ enum nl80211_commands { * the incoming frame RX timestamp. * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent * (re)associations. + * + * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest + * bit corresponds to the lowest 20 MHz channel. Each bit set to 1 + * indicates that the sub-channel is punctured. Higher 16 bits are + * reserved. + * + * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW + * timestamping can be enabled for concurrently (u16), a wiphy attribute. + * A value of 0xffff indicates setting for all peers (i.e. not specifying + * an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported. + * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should + * be enabled or not (flag attribute). + * + * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for + * reduced neighbor report (RNR) elements. This attribute can be used + * only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled. + * Userspace is responsible for splitting the RNR into multiple + * elements such that each element excludes the non-transmitting + * profiles already included in the MBSSID element + * (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon + * will be generated by adding MBSSID and RNR elements at the same + * index. If the userspace includes more RNR elements than number of + * MBSSID elements then these will be added in every EMA beacon. + * + * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is + * disabled. + * + * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e. + * include BSSes that can only be used in restricted scenarios and/or + * cannot be used at all. + * + * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to + * link mapping. The length is 8 * sizeof(u16). For each TID the link + * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element) + * in Draft P802.11be_D4.0. + * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to + * link mapping. The length is 8 * sizeof(u16). For each TID the link + * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element) + * in Draft P802.11be_D4.0. + * + * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with + * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs + * are used on this connection + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3280,6 +3385,22 @@ enum nl80211_attrs { NL80211_ATTR_RX_HW_TIMESTAMP, NL80211_ATTR_TD_BITMAP, + NL80211_ATTR_PUNCT_BITMAP, + + NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS, + NL80211_ATTR_HW_TIMESTAMP_ENABLED, + + NL80211_ATTR_EMA_RNR_ELEMS, + + NL80211_ATTR_MLO_LINK_DISABLED, + + NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA, + + NL80211_ATTR_MLO_TTLM_DLINK, + NL80211_ATTR_MLO_TTLM_ULINK, + + NL80211_ATTR_ASSOC_SPP_AMSDU, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3420,6 +3541,7 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a * previously added station into associated state + * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -3432,6 +3554,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, NL80211_STA_FLAG_ASSOCIATED, + NL80211_STA_FLAG_SPP_AMSDU, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -3606,6 +3729,13 @@ enum nl80211_eht_ru_alloc { * (u8, see &enum nl80211_eht_gi) * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) + * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10) + * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4) + * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate + * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate + * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate + * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate + * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3632,6 +3762,13 @@ enum nl80211_rate_info { NL80211_RATE_INFO_EHT_NSS, NL80211_RATE_INFO_EHT_GI, NL80211_RATE_INFO_EHT_RU_ALLOC, + NL80211_RATE_INFO_S1G_MCS, + NL80211_RATE_INFO_S1G_NSS, + NL80211_RATE_INFO_1_MHZ_WIDTH, + NL80211_RATE_INFO_2_MHZ_WIDTH, + NL80211_RATE_INFO_4_MHZ_WIDTH, + NL80211_RATE_INFO_8_MHZ_WIDTH, + NL80211_RATE_INFO_16_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -4000,6 +4137,10 @@ enum nl80211_band_iftype_attr { * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes * the allowed channel bandwidth configurations. * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS + * set subfield, as in the S1G information IE, 5 bytes + * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the + * S1G information IE, 10 bytes * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -4020,6 +4161,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_EDMG_CHANNELS, NL80211_BAND_ATTR_EDMG_BW_CONFIG, + NL80211_BAND_ATTR_S1G_MCS_NSS_SET, + NL80211_BAND_ATTR_S1G_CAPA, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -4065,7 +4209,7 @@ enum nl80211_wmm_rule { * (100 * dBm). * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS * (enum nl80211_dfs_state) - * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long * this channel is in this DFS state. * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this * channel as the control channel @@ -4119,6 +4263,19 @@ enum nl80211_wmm_rule { * as the primary or any of the secondary channels isn't possible * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that + * is allowed on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is + * allowed for peer-to-peer or adhoc communication under the control + * of a DFS master which operates on the same channel (FCC-594280 D01 + * Section B.3). Should be used together with %NL80211_RRF_DFS only. + * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP + * not allowed using this channel + * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP + * not allowed using this channel + * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor + * mode despite other (regulatory) restrictions, even if the channel is + * otherwise completely disabled. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4157,6 +4314,11 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_16MHZ, NL80211_FREQUENCY_ATTR_NO_320MHZ, NL80211_FREQUENCY_ATTR_NO_EHT, + NL80211_FREQUENCY_ATTR_PSD, + NL80211_FREQUENCY_ATTR_DFS_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT, + NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, + NL80211_FREQUENCY_ATTR_CAN_MONITOR, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4169,6 +4331,10 @@ enum nl80211_frequency_attr { #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ NL80211_FREQUENCY_ATTR_IR_CONCURRENT +#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \ + NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT +#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \ + NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT /** * enum nl80211_bitrate_attr - bitrate attributes @@ -4257,6 +4423,8 @@ enum nl80211_reg_type { * a given frequency range. The value is in mBm (100 * dBm). * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. * If not present or 0 default CAC time will be used. + * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm). + * This could be negative. * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number * currently defined * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use @@ -4274,6 +4442,8 @@ enum nl80211_reg_rule_attr { NL80211_ATTR_DFS_CAC_TIME, + NL80211_ATTR_POWER_RULE_PSD, + /* keep last */ __NL80211_REG_RULE_ATTR_AFTER_LAST, NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 @@ -4302,14 +4472,7 @@ enum nl80211_reg_rule_attr { * value as specified by &struct nl80211_bss_select_rssi_adjust. * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching * (this cannot be used together with SSID). - * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the - * band specific minimum rssi thresholds for the bands defined in - * enum nl80211_band. The minimum rssi threshold value(s32) specific to a - * band shall be encapsulated in attribute with type value equals to one - * of the NL80211_BAND_* defined in enum nl80211_band. For example, the - * minimum rssi threshold value for 2.4GHZ band shall be encapsulated - * within an attribute of type NL80211_BAND_2GHZ. And one or more of such - * attributes will be nested within this attribute. + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -4322,7 +4485,7 @@ enum nl80211_sched_scan_match_attr { NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, - NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */ /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -4356,6 +4519,14 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed * @NL80211_RRF_NO_HE: HE operation not allowed * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed + * @NL80211_RRF_NO_EHT: EHT operation not allowed + * @NL80211_RRF_PSD: Ruleset has power spectral density value + * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for + peer-to-peer or adhoc communication under the control of a DFS master + which operates on the same channel (FCC-594280 D01 Section B.3). + Should be used together with %NL80211_RRF_DFS only. + * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed + * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4375,6 +4546,11 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_160MHZ = 1<<16, NL80211_RRF_NO_HE = 1<<17, NL80211_RRF_NO_320MHZ = 1<<18, + NL80211_RRF_NO_EHT = 1<<19, + NL80211_RRF_PSD = 1<<20, + NL80211_RRF_DFS_CONCURRENT = 1<<21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4383,6 +4559,8 @@ enum nl80211_reg_rule_flags { #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ NL80211_RRF_NO_HT40PLUS) #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT +#define NL80211_RRF_NO_UHB_VLP_CLIENT NL80211_RRF_NO_6GHZ_VLP_CLIENT +#define NL80211_RRF_NO_UHB_AFC_CLIENT NL80211_RRF_NO_6GHZ_AFC_CLIENT /* For backport compatibility with older userspace */ #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) @@ -4911,6 +5089,36 @@ enum nl80211_bss_scan_width { NL80211_BSS_CHAN_WIDTH_2, }; +/** + * enum nl80211_bss_use_for - bitmap indicating possible BSS use + * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection", + * including IBSS/MBSS depending on the type. + * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an + * MLO connection. Note that for an MLO connection, all links including + * the assoc link must have this flag set, and the assoc link must + * additionally have %NL80211_BSS_USE_FOR_NORMAL set. + */ +enum nl80211_bss_use_for { + NL80211_BSS_USE_FOR_NORMAL = 1 << 0, + NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1, +}; + +/** + * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a + * BSS isn't possible + * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't + * supported by the device, and this BSS entry represents one. + * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting + * the AP power type (SP, VLP, AP) that the AP uses. + */ +enum nl80211_bss_cannot_use_reasons { + NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0, + NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH = 1 << 1, +}; + +#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \ + NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH + /** * enum nl80211_bss - netlink attributes for a BSS * @@ -4942,7 +5150,7 @@ enum nl80211_bss_scan_width { * elements from a Beacon frame (bin); not present if no Beacon frame has * yet been received * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel - * (u32, enum nl80211_bss_scan_width) + * (u32, enum nl80211_bss_scan_width) - No longer used! * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) * (not present if no beacon frame has been received yet) * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and @@ -4963,6 +5171,14 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. + * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be + * used for, see &enum nl80211_bss_use_for. + * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot + * be used for all or some of the possible uses by the device reporting it, + * even though its presence was detected. + * This is a u64 attribute containing a bitmap of values from + * &enum nl80211_cannot_use_reasons, note that the attribute may be missing + * if no reasons are specified. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4990,6 +5206,8 @@ enum nl80211_bss { NL80211_BSS_FREQUENCY_OFFSET, NL80211_BSS_MLO_LINK_ID, NL80211_BSS_MLD_ADDR, + NL80211_BSS_USE_FOR, + NL80211_BSS_CANNOT_USE_REASONS, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -5338,7 +5556,7 @@ enum nl80211_tx_rate_setting { * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but * per peer instead. - * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates * that the new configuration overrides all previous peer * configurations, otherwise previous peer specific configurations * should be left untouched. @@ -5539,6 +5757,8 @@ struct nl80211_pattern_support { * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one * frequency, it means that the match occurred in more than one * channel. + * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only. + * Wake up happened due to unprotected deauth or disassoc frame in MFP. * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @@ -5566,6 +5786,7 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, NL80211_WOWLAN_TRIG_NET_DETECT, NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, + NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -5721,7 +5942,7 @@ enum nl80211_attr_coalesce_rule { /** * enum nl80211_coalesce_condition - coalesce rule conditions - * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns * in a rule are matched. * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns * in a rule are not matched. @@ -5820,7 +6041,7 @@ enum nl80211_if_combination_attrs { * enum nl80211_plink_state - state of a mesh peer link finite state machine * * @NL80211_PLINK_LISTEN: initial state, considered the implicit - * state of non existent mesh peer links + * state of non-existent mesh peer links * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to * this mesh peer * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received @@ -5869,6 +6090,7 @@ enum plink_actions { #define NL80211_KEK_LEN 16 #define NL80211_KCK_EXT_LEN 24 #define NL80211_KEK_EXT_LEN 32 +#define NL80211_KCK_EXT_LEN_32 32 #define NL80211_REPLAY_CTR_LEN 8 /** @@ -6112,7 +6334,7 @@ enum nl80211_feature_flags { * request to use RRM (see %NL80211_ATTR_USE_RRM) with * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set * the ASSOC_REQ_USE_RRM flag in the association request even if - * NL80211_FEATURE_QUIET is not advertized. + * NL80211_FEATURE_QUIET is not advertised. * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air * sniffer which means that it can be configured to hear packets from * certain groups which can be configured by the @@ -6124,13 +6346,15 @@ enum nl80211_feature_flags { * the BSS that the interface that requested the scan is connected to * (if available). * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the - * time the last beacon/probe was received. The time is the TSF of the - * BSS that the interface that requested the scan is connected to - * (if available). + * time the last beacon/probe was received. For a non-MLO connection, the + * time is the TSF of the BSS that the interface that requested the scan is + * connected to (if available). For an MLO connection, the time is the TSF + * of the BSS corresponding with link ID specified in the scan request (if + * specified). * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of * channel dwell time. * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate - * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. + * configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate. * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate * configuration (AP/mesh) with HT rates. * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate @@ -6204,8 +6428,7 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching * (set/del PMKSA operations) in AP mode. * - * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports - * filtering of sched scan results using band specific RSSI thresholds. + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete * * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power * to a station. @@ -6294,6 +6517,31 @@ enum nl80211_feature_flags { * might apply, e.g. no scans in progress, no offchannel operations * in progress, and no active connections. * + * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode. + * + * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables + * authentication, data encryption and message integrity. + * + * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA + * in authentication and deauthentication frames sent to unassociated peer + * using @NL80211_CMD_FRAME. + * + * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE + * handling in station mode. + * + * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE + * handling in AP mode. + * + * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or + * ad hoc operation on DFS channels under the control of a concurrent + * DFS master on the same channel as described in FCC-594280 D01 + * (Section B.3). This, for example, allows P2P GO and P2P clients to + * operate on DFS channels as long as there's a concurrent BSS connection. + * + * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP + * (signaling and payload protected) A-MSDUs and this shall be advertised + * in the RSNXE. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6335,7 +6583,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, NL80211_EXT_FEATURE_AP_PMKSA_CACHING, - NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */ NL80211_EXT_FEATURE_EXT_KEY_ID, NL80211_EXT_FEATURE_STA_TX_PWR, NL80211_EXT_FEATURE_SAE_OFFLOAD, @@ -6362,6 +6610,13 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, NL80211_EXT_FEATURE_RADAR_BACKGROUND, NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, + NL80211_EXT_FEATURE_PUNCT, + NL80211_EXT_FEATURE_SECURE_NAN, + NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA, + NL80211_EXT_FEATURE_OWE_OFFLOAD, + NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, + NL80211_EXT_FEATURE_DFS_CONCURRENT, + NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -6446,7 +6701,7 @@ enum nl80211_timeout_reason { * request parameters IE in the probe request * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at - * rate of at least 5.5M. In case non OCE AP is discovered in the channel, + * rate of at least 5.5M. In case non-OCE AP is discovered in the channel, * only the first probe req in the channel will be sent in high rate. * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request * tx deferral (dot11FILSProbeDelay shall be set to 15ms) @@ -6476,8 +6731,16 @@ enum nl80211_timeout_reason { * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. - * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by - * 2.4/5 GHz APs + * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by + * 2.4/5 GHz APs. When the flag is set, the scan logic will use the + * information from the RNR element found in beacons/probe responses + * received on the 2.4/5 GHz channels to actively scan only the 6GHz + * channels on which APs are expected to be found. Note that when not set, + * the scan logic would scan all 6GHz channels, but since transmission of + * probe requests on non-PSC channels is limited, it is highly likely that + * these channels would passively be scanned. Also note that when the flag + * is set, in addition to the colocated APs, PSC channels would also be + * scanned if the user space has asked for it. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -6806,7 +7069,7 @@ enum nl80211_nan_func_term_reason { * The instance ID for the follow up Service Discovery Frame. This is u8. * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type * is follow up. This is a u8. - * The requestor instance ID for the follow up Service Discovery Frame. + * The requester instance ID for the follow up Service Discovery Frame. * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the * follow up Service Discovery Frame. This is a binary attribute. * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a @@ -7196,7 +7459,7 @@ enum nl80211_peer_measurement_attrs { * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if * trigger based ranging measurement is supported * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating - * if non trigger based ranging measurement is supported + * if non-trigger-based ranging measurement is supported * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -7250,7 +7513,7 @@ enum nl80211_peer_measurement_ftm_capa { * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based * ranging will be used. - * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based + * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based * ranging measurement (flag) * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are * mutually exclusive. @@ -7328,7 +7591,7 @@ enum nl80211_peer_measurement_ftm_failure_reasons { * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames * transmitted (u32, optional) * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames - * that were acknowleged (u32, optional) + * that were acknowledged (u32, optional) * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the * busy peer (u32, seconds) * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent @@ -7489,7 +7752,7 @@ enum nl80211_iftype_akm_attributes { * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). * Allowed range: 0..10000 (TU = Time Unit) * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). - * Allowed range: 0..10000 (TU = Time Unit) + * Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled. * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action * frame including the headers. * @@ -7522,7 +7785,8 @@ enum nl80211_fils_discovery_attributes { * * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 - * 26.17.2.3.2 (AP behavior for fast passive scanning). + * 26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is + * disabled. * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response * frame template (binary). * diff --git a/src/basic/linux/pkt_sched.h b/src/basic/linux/pkt_sched.h index 000eec1..a3cd0c2 100644 --- a/src/basic/linux/pkt_sched.h +++ b/src/basic/linux/pkt_sched.h @@ -477,115 +477,6 @@ enum { #define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1) - -/* CBQ section */ - -#define TC_CBQ_MAXPRIO 8 -#define TC_CBQ_MAXLEVEL 8 -#define TC_CBQ_DEF_EWMA 5 - -struct tc_cbq_lssopt { - unsigned char change; - unsigned char flags; -#define TCF_CBQ_LSS_BOUNDED 1 -#define TCF_CBQ_LSS_ISOLATED 2 - unsigned char ewma_log; - unsigned char level; -#define TCF_CBQ_LSS_FLAGS 1 -#define TCF_CBQ_LSS_EWMA 2 -#define TCF_CBQ_LSS_MAXIDLE 4 -#define TCF_CBQ_LSS_MINIDLE 8 -#define TCF_CBQ_LSS_OFFTIME 0x10 -#define TCF_CBQ_LSS_AVPKT 0x20 - __u32 maxidle; - __u32 minidle; - __u32 offtime; - __u32 avpkt; -}; - -struct tc_cbq_wrropt { - unsigned char flags; - unsigned char priority; - unsigned char cpriority; - unsigned char __reserved; - __u32 allot; - __u32 weight; -}; - -struct tc_cbq_ovl { - unsigned char strategy; -#define TC_CBQ_OVL_CLASSIC 0 -#define TC_CBQ_OVL_DELAY 1 -#define TC_CBQ_OVL_LOWPRIO 2 -#define TC_CBQ_OVL_DROP 3 -#define TC_CBQ_OVL_RCLASSIC 4 - unsigned char priority2; - __u16 pad; - __u32 penalty; -}; - -struct tc_cbq_police { - unsigned char police; - unsigned char __res1; - unsigned short __res2; -}; - -struct tc_cbq_fopt { - __u32 split; - __u32 defmap; - __u32 defchange; -}; - -struct tc_cbq_xstats { - __u32 borrows; - __u32 overactions; - __s32 avgidle; - __s32 undertime; -}; - -enum { - TCA_CBQ_UNSPEC, - TCA_CBQ_LSSOPT, - TCA_CBQ_WRROPT, - TCA_CBQ_FOPT, - TCA_CBQ_OVL_STRATEGY, - TCA_CBQ_RATE, - TCA_CBQ_RTAB, - TCA_CBQ_POLICE, - __TCA_CBQ_MAX, -}; - -#define TCA_CBQ_MAX (__TCA_CBQ_MAX - 1) - -/* dsmark section */ - -enum { - TCA_DSMARK_UNSPEC, - TCA_DSMARK_INDICES, - TCA_DSMARK_DEFAULT_INDEX, - TCA_DSMARK_SET_TC_INDEX, - TCA_DSMARK_MASK, - TCA_DSMARK_VALUE, - __TCA_DSMARK_MAX, -}; - -#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1) - -/* ATM section */ - -enum { - TCA_ATM_UNSPEC, - TCA_ATM_FD, /* file/socket descriptor */ - TCA_ATM_PTR, /* pointer to descriptor - later */ - TCA_ATM_HDR, /* LL header */ - TCA_ATM_EXCESS, /* excess traffic class (0 for CLP) */ - TCA_ATM_ADDR, /* PVC address (for output only) */ - TCA_ATM_STATE, /* VC state (ATM_VS_*; for output only) */ - __TCA_ATM_MAX, -}; - -#define TCA_ATM_MAX (__TCA_ATM_MAX - 1) - /* Network emulator */ enum { @@ -603,6 +494,7 @@ enum { TCA_NETEM_JITTER64, TCA_NETEM_SLOT, TCA_NETEM_SLOT_DIST, + TCA_NETEM_PRNG_SEED, __TCA_NETEM_MAX, }; @@ -719,6 +611,11 @@ enum { #define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) +enum { + TC_FP_EXPRESS = 1, + TC_FP_PREEMPTIBLE = 2, +}; + struct tc_mqprio_qopt { __u8 num_tc; __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; @@ -732,12 +629,23 @@ struct tc_mqprio_qopt { #define TC_MQPRIO_F_MIN_RATE 0x4 #define TC_MQPRIO_F_MAX_RATE 0x8 +enum { + TCA_MQPRIO_TC_ENTRY_UNSPEC, + TCA_MQPRIO_TC_ENTRY_INDEX, /* u32 */ + TCA_MQPRIO_TC_ENTRY_FP, /* u32 */ + + /* add new constants above here */ + __TCA_MQPRIO_TC_ENTRY_CNT, + TCA_MQPRIO_TC_ENTRY_MAX = (__TCA_MQPRIO_TC_ENTRY_CNT - 1) +}; + enum { TCA_MQPRIO_UNSPEC, TCA_MQPRIO_MODE, TCA_MQPRIO_SHAPER, TCA_MQPRIO_MIN_RATE64, TCA_MQPRIO_MAX_RATE64, + TCA_MQPRIO_TC_ENTRY, __TCA_MQPRIO_MAX, }; @@ -924,15 +832,22 @@ enum { TCA_FQ_HORIZON_DROP, /* drop packets beyond horizon, or cap their EDT */ + TCA_FQ_PRIOMAP, /* prio2band */ + + TCA_FQ_WEIGHTS, /* Weights for each band */ + __TCA_FQ_MAX }; #define TCA_FQ_MAX (__TCA_FQ_MAX - 1) +#define FQ_BANDS 3 +#define FQ_MIN_WEIGHT 16384 + struct tc_fq_qd_stats { __u64 gc_flows; - __u64 highprio_packets; - __u64 tcp_retrans; + __u64 highprio_packets; /* obsolete */ + __u64 tcp_retrans; /* obsolete */ __u64 throttled; __u64 flows_plimit; __u64 pkts_too_long; @@ -945,6 +860,10 @@ struct tc_fq_qd_stats { __u64 ce_mark; /* packets above ce_threshold */ __u64 horizon_drops; __u64 horizon_caps; + __u64 fastpath_packets; + __u64 band_drops[FQ_BANDS]; + __u32 band_pkt_count[FQ_BANDS]; + __u32 pad; }; /* Heavy-Hitter Filter */ @@ -1236,12 +1155,23 @@ enum { TCA_TAPRIO_TC_ENTRY_UNSPEC, TCA_TAPRIO_TC_ENTRY_INDEX, /* u32 */ TCA_TAPRIO_TC_ENTRY_MAX_SDU, /* u32 */ + TCA_TAPRIO_TC_ENTRY_FP, /* u32 */ /* add new constants above here */ __TCA_TAPRIO_TC_ENTRY_CNT, TCA_TAPRIO_TC_ENTRY_MAX = (__TCA_TAPRIO_TC_ENTRY_CNT - 1) }; +enum { + TCA_TAPRIO_OFFLOAD_STATS_PAD = 1, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_WINDOW_DROPS, /* u64 */ + TCA_TAPRIO_OFFLOAD_STATS_TX_OVERRUNS, /* u64 */ + + /* add new constants above here */ + __TCA_TAPRIO_OFFLOAD_STATS_CNT, + TCA_TAPRIO_OFFLOAD_STATS_MAX = (__TCA_TAPRIO_OFFLOAD_STATS_CNT - 1) +}; + enum { TCA_TAPRIO_ATTR_UNSPEC, TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ diff --git a/src/basic/linux/rtnetlink.h b/src/basic/linux/rtnetlink.h index eb2747d..3b687d2 100644 --- a/src/basic/linux/rtnetlink.h +++ b/src/basic/linux/rtnetlink.h @@ -502,13 +502,17 @@ enum { #define RTAX_MAX (__RTAX_MAX - 1) -#define RTAX_FEATURE_ECN (1 << 0) -#define RTAX_FEATURE_SACK (1 << 1) -#define RTAX_FEATURE_TIMESTAMP (1 << 2) -#define RTAX_FEATURE_ALLFRAG (1 << 3) - -#define RTAX_FEATURE_MASK (RTAX_FEATURE_ECN | RTAX_FEATURE_SACK | \ - RTAX_FEATURE_TIMESTAMP | RTAX_FEATURE_ALLFRAG) +#define RTAX_FEATURE_ECN (1 << 0) +#define RTAX_FEATURE_SACK (1 << 1) /* unused */ +#define RTAX_FEATURE_TIMESTAMP (1 << 2) /* unused */ +#define RTAX_FEATURE_ALLFRAG (1 << 3) /* unused */ +#define RTAX_FEATURE_TCP_USEC_TS (1 << 4) + +#define RTAX_FEATURE_MASK (RTAX_FEATURE_ECN | \ + RTAX_FEATURE_SACK | \ + RTAX_FEATURE_TIMESTAMP | \ + RTAX_FEATURE_ALLFRAG | \ + RTAX_FEATURE_TCP_USEC_TS) struct rta_session { __u8 proto; @@ -635,6 +639,7 @@ enum { TCA_INGRESS_BLOCK, TCA_EGRESS_BLOCK, TCA_DUMP_FLAGS, + TCA_EXT_WARN_MSG, __TCA_MAX }; @@ -788,6 +793,7 @@ enum { TCA_ROOT_FLAGS, TCA_ROOT_COUNT, TCA_ROOT_TIME_DELTA, /* in msecs */ + TCA_ROOT_EXT_WARN_MSG, __TCA_ROOT_MAX, #define TCA_ROOT_MAX (__TCA_ROOT_MAX - 1) }; diff --git a/src/basic/linux/stddef.h b/src/basic/linux/stddef.h index 1a73963..b888a83 100644 --- a/src/basic/linux/stddef.h +++ b/src/basic/linux/stddef.h @@ -26,8 +26,13 @@ union { \ struct { MEMBERS } ATTRS; \ struct TAG { MEMBERS } ATTRS NAME; \ - } + } ATTRS +#ifdef __cplusplus +/* sizeof(struct{}) is 1 in C++, not 0, can't use C version of the macro. */ +#define __DECLARE_FLEX_ARRAY(T, member) \ + T member[0] +#else /** * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union * @@ -44,3 +49,9 @@ TYPE NAME[]; \ } #endif + +#ifndef __counted_by +#define __counted_by(m) +#endif + +#endif /* _UAPI_LINUX_STDDEF_H */ -- cgit v1.2.3