systemd kernel-install 8 kernel-install Add and remove kernel and initrd images to and from the boot partition kernel-install OPTIONS add KERNEL-VERSION KERNEL-IMAGE INITRD-FILE kernel-install OPTIONS add-all kernel-install OPTIONS remove KERNEL-VERSION kernel-install OPTIONS inspect KERNEL-VERSION KERNEL-IMAGE INITRD-FILE kernel-install OPTIONS list kernel-install is used to install and remove kernel and initrd images Nowadays actually CPIO archives used as an "initramfs", rather than "initrd". See bootup7 for an explanation. to and from the boot partition, referred to as $BOOT here. It will usually be one of /boot/, /efi/, or /boot/efi/, see below. kernel-install will run the executable files ("plugins") located in the directory /usr/lib/kernel/install.d/ and the local administration directory /etc/kernel/install.d/. All files are collectively sorted and executed in lexical order, regardless of the directory in which they live. However, files with identical filenames replace each other. Files in /etc/kernel/install.d/ take precedence over files with the same name in /usr/lib/kernel/install.d/. This can be used to override a system-supplied executables with a local file if needed; a symbolic link in /etc/kernel/install.d/ with the same name as an executable in /usr/lib/kernel/install.d/, pointing to /dev/null, disables the executable entirely. Executables must have the extension .install; other extensions are ignored. An executable placed in these directories should return 0 on success. It may also return 77 to cause the whole operation to terminate (executables later in lexical order will be skipped). The following commands are understood: add [[[KERNEL-VERSION] KERNEL-IMAGE] [INITRD-FILE ...]] This command takes a kernel version string and a path to a kernel image file as arguments. If the former is omitted, specified as an empty string or as "-" it defaults to the current kernel version, i.e. the same string uname -r returns. If the latter is omitted, specified as an empty string or as "-" defaults to /usr/lib/modules/KERNEL_VERSION/vmlinuz. Optionally, one or more initrd images may be specified as well (note that plugins might generate additional ones). The executable files from /usr/lib/kernel/install.d/*.install and /etc/kernel/install.d/*.install (i.e. the plugins) are called with the following arguments: add KERNEL-VERSION $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ KERNEL-IMAGE \ [INITRD-FILE ...] The third argument directly refers to the path where to place kernel images, initrd images and other resources for Boot Loader Specification Type #1 entries (the "entry directory"). If other boot loader schemes are used the parameter may be ignored. The ENTRY-TOKEN string is typically the machine ID and is supposed to identify the local installation on the system. For details see below. Two default plugins execute the following operations in this case: kernel-install creates $BOOT/ENTRY-TOKEN/KERNEL-VERSION, if enabled (see $KERNEL_INSTALL_LAYOUT). 50-depmod.install runs depmod8 for the KERNEL-VERSION. 90-loaderentry.install copies KERNEL-IMAGE to $BOOT/ENTRY-TOKEN/KERNEL-VERSION/linux. If INITRD-FILEs are provided, it also copies them to $BOOT/ENTRY-TOKEN/KERNEL_VERSION/INITRD-FILE. This can also be used to prepend microcode before the actual initrd. It also creates a boot loader entry according to the Boot Loader Specification (Type #1) in $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION.conf. The title of the entry is the PRETTY_NAME parameter specified in /etc/os-release or /usr/lib/os-release (if the former is missing), or "Linux KERNEL-VERSION", if unset. If $KERNEL_INSTALL_LAYOUT is not "bls", this plugin does nothing. 90-uki-copy.install copies a file uki.efi from $KERNEL_INSTALL_STAGING_AREA or if it does not exist the KERNEL-IMAGE argument, only if it has a .efi extension, to $BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION.efi. If $KERNEL_INSTALL_LAYOUT is not "uki", this plugin does nothing. add-all This is the same as add (see above), but invokes the operation iteratively for every installed kernel in /usr/lib/modules/. This operation is only supported on systems where the kernel image is installed in /usr/lib/modules/KERNEL-VERSION/vmlinuz. remove KERNEL-VERSION This command expects a kernel version string as single argument. The executable files from /usr/lib/kernel/install.d/*.install and /etc/kernel/install.d/*.install (i.e. the plugins) are called with the following arguments: remove KERNEL-VERSION $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ Afterwards, kernel-install removes the entry directory $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ and its contents, if it exists. Two default plugins execute the following operations in this case: 50-depmod.install removes the files generated by depmod for this kernel again. 90-loaderentry.install removes the file $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION.conf. 90-uki-copy.install removes the file $BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION.efi. inspect [[[KERNEL-VERSION] KERNEL-IMAGE] [INITRD-FILE ...]] Takes the same parameters as add. Shows the various paths and parameters configured or auto-detected. In particular shows the values of the various $KERNEL_INSTALL_* environment variables listed below, as they would be passed to plugins. The --json option can be used to get the output of this verb as a JSON object. list Shows the various installed kernels. This enumerates the subdirectories of /usr/lib/modules/, and shows whether a kernel image is installed there. installkernel OPTIONS VERSION VMLINUZ MAP INSTALLATION-DIR When invoked as installkernel, this program accepts arguments as specified by the kernel build system's make install command. The VERSION and VMLINUZ parameters specify the kernel version and the kernel binary. The other two parameters (MAP and INSTALLATION-DIR) are currently ignored. The partition where the kernels and Boot Loader Specification snippets are located is called $BOOT. kernel-install determines the location of this partition by checking /efi/, /boot/, and /boot/efi/ in turn. The first location where $BOOT/loader/entries/ or $BOOT/ENTRY-TOKEN/ exists is used. The following options are understood: --make-entry-directory=yes|no|auto Controls creation and deletion of the Boot Loader Specification Type #1 entry directory on the file system containing resources such as kernel and initrd images during add and remove, respectively. The directory is named after the entry token, and is placed immediately below the boot root directory. When auto, the directory is created or removed only when the install layout is bls. Defaults to auto. --entry-token= Controls how to name and identify boot loader entries for this kernel installation or deletion. Takes one of auto, machine-id, os-id, os-image-id, or an arbitrary string prefixed by literal: as argument. If set to machine-id the entries are named after the machine ID of the running system (e.g. b0e793a9baf14b5fa13ecbe84ff637ac). See machine-id5 for details about the machine ID concept and file. If set to os-id the entries are named after the OS ID of the running system, i.e. the ID= field of os-release5 (e.g. fedora). Similarly, if set to os-image-id the entries are named after the OS image ID of the running system, i.e. the IMAGE_ID= field of os-release (e.g. vendorx-cashier-system). If set to auto (the default), the /etc/kernel/entry-token (or $KERNEL_INSTALL_CONF_ROOT/entry-token) file will be read if it exists, and the stored value used. Otherwise if the local machine ID is initialized it is used. Otherwise IMAGE_ID= from os-release will be used, if set. Otherwise, ID= from os-release will be used, if set. Otherwise a randomly generated machine ID is used. Using the machine ID for naming the entries is generally preferable, however there are cases where using the other identifiers is a good option. Specifically: if the identification data that the machine ID entails shall not be stored on the (unencrypted) $BOOT_ROOT partition, or if the ID shall be generated on first boot and is not known when the entries are prepared. Note that using the machine ID has the benefit that multiple parallel installations of the same OS can coexist on the same medium, and they can update their boot loader entries independently. When using another identifier (such as the OS ID or the OS image ID), parallel installations of the same OS would try to use the same entry name. To support parallel installations, the installer must use a different entry token when adding a second installation. -v --verbose Output additional information about operations being performed. --root=root Takes a directory path as an argument. All paths will be prefixed with the given alternate root path, including config search paths. This is useful to operate on a system image mounted to the specified directory instead of the host system itself. --image=image Takes a path to a disk image file or block device node. If specified, all operations are applied to the file system in the indicated disk image. This option is similar to --root=, but operates on file systems stored in disk images or block devices. The disk image should either contain just a file system or a set of file systems within a GPT partition table, following the Discoverable Partitions Specification. For further information on supported disk images, see systemd-nspawn1's switch of the same name. If --verbose is used, $KERNEL_INSTALL_VERBOSE=1 will be exported for plugins. They may output additional logs in this case. $KERNEL_INSTALL_IMAGE_TYPE=uki|pe|unknown is set for the plugins to specify the type of the kernel image. uki Unified kernel image. pe PE binary. unknown Unknown type. $KERNEL_INSTALL_MACHINE_ID is set for the plugins to the desired machine-id to use. It's always a 128-bit ID. Normally it's read from /etc/machine-id, but it can also be overridden via $MACHINE_ID (see below). If not specified via these methods, a fallback value will generated by kernel-install and used only for a single invocation. $KERNEL_INSTALL_ENTRY_TOKEN is set for the plugins to the desired entry "token" to use. It's an identifier that shall be used to identify the local installation, and is often the machine ID, i.e. same as $KERNEL_INSTALL_MACHINE_ID, but might also be a different type of identifier, for example a fixed string or the ID=, IMAGE_ID= values from /etc/os-release. The string passed here will be used to name Boot Loader Specification entries, or the directories the kernel image and initial RAM disk images are placed into. Note that while $KERNEL_INSTALL_ENTRY_TOKEN and $KERNEL_INSTALL_MACHINE_ID are often set to the same value, the latter is guaranteed to be a valid 32 character ID in lowercase hexadecimals while the former can be any short string. The entry token to use is read from /etc/kernel/entry-token, if it exists. Otherwise a few possible candidates below $BOOT are checked for Boot Loader Specification Type 1 entry directories, and if found the entry token is derived from that. If that is not successful, $KERNEL_INSTALL_MACHINE_ID is used as fallback. $KERNEL_INSTALL_BOOT_ROOT is set for the plugins to the absolute path of the root directory (mount point, usually) of the hierarchy where boot loader entries, kernel images, and associated resources should be placed. This usually is the path where the XBOOTLDR partition or the ESP (EFI System Partition) are mounted, and also conceptually referred to as $BOOT. Can be overridden by setting $BOOT_ROOT (see below). $KERNEL_INSTALL_LAYOUT=auto|bls|uki|other|... is set for the plugins to specify the installation layout. Additional layout names may be defined by convention. If a plugin uses a special layout, it's encouraged to declare its own layout name and configure layout= in install.conf upon initial installation. The following values are currently understood: bls Standard Boot Loader Specification Type #1 layout, compatible with systemd-boot7: entries in $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION[+TRIES].conf, kernel and initrds under $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ Implemented by 90-loaderentry.install. uki Standard Boot Loader Specification Type #2 layout, compatible with systemd-boot7: unified kernel images under $BOOT/EFI/Linux as $BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION[+TRIES].efi. Implemented by 90-uki-copy.install. other Some other layout not understood natively by kernel-install. auto Pick the layout automatically. If the kernel is a UKI set layout to uki. If not default to bls if $BOOT/loader/entries.srel with content type1 or $BOOT/ENTRY-TOKEN exists, or other otherwise. Leaving layout blank has the same effect. This is the default. $KERNEL_INSTALL_INITRD_GENERATOR and $KERNEL_INSTALL_UKI_GENERATOR are set for plugins to select the initrd and/or UKI generator. This may be configured as initrd_generator= and uki_generator= in install.conf, see below. $KERNEL_INSTALL_STAGING_AREA is set for plugins to a path to a directory. Plugins may drop files in that directory, and they will be installed as part of the loader entry, based on the file name and extension: Files named initrd* will be installed as INITRD-FILEs, and files named microcode* will be prepended before INITRD-FILEs. $KERNEL_INSTALL_CONF_ROOT can be set to override the location of the configuration files read by kernel-install. When set, install.conf, entry-token, and other files will be read from this directory only. Note that this path is relative to the host, and in particular symlinks in this directory are resolved relative to the host, even if --root=root is used. This means that it is generally not correct to use this variable to specify a directory underneath root if symlinks are used there. $KERNEL_INSTALL_PLUGINS can be set to override the list of plugins executed by kernel-install. The argument is a whitespace-separated list of paths. KERNEL_INSTALL_PLUGINS=: may be used to prevent any plugins from running. $MACHINE_ID can be set for kernel-install to override $KERNEL_INSTALL_MACHINE_ID, the machine ID. $BOOT_ROOT can be set for kernel-install to override $KERNEL_INSTALL_BOOT_ROOT, the installation location for boot entries. The last two variables may also be set in install.conf. Variables set in the environment take precedence over the values specified in the config file. If every executable returns 0 or 77, 0 is returned, and a non-zero failure code otherwise. /etc/kernel/install.d/*.install /usr/lib/kernel/install.d/*.install Drop-in files which are executed by kernel-install. /etc/kernel/cmdline /usr/lib/kernel/cmdline /proc/cmdline Specifies the kernel command line to use. The first of the files that is found will be used. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for details. /etc/kernel/devicetree /usr/lib/kernel/devicetree Specifies the partial path to the file containing the device tree blob to install with the kernel and use at boot. The first of the files that is found will be used. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for details. The devicetree file contains a path, and this path specifies a location relative to the kernel install tree. A set of locations is checked, including in particular /usr/lib/modules/KERNEL_VERSION/dtb/, which is the recommended location to place the dtb files under. For example, with broadcom/bcm2711-rpi-4-b.dtb in the devicetree file, the device tree blob for the Raspberry Pi 4 Model B would be installed, and the actual file would be /usr/lib/modules/KERNEL_VERSION/dtb/broadcom/bcm2711-rpi-4-b.dtb. /etc/kernel/tries Read by 90-loaderentry.install and 90-uki-copy.install. If this file exists, a numeric value is read from it and the naming of the generated entry file or UKI is altered to include it as $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION+TRIES.conf or $BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION+TRIES.efi, respectively. This is useful for boot loaders such as systemd-boot7 which implement boot attempt counting with a counter embedded in the entry file name. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for details. /etc/kernel/entry-token If this file exists it is read and used as "entry token" for this system, i.e. is used for naming Boot Loader Specification entries. See $KERNEL_INSTALL_ENTRY_TOKEN above for details. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for details. /etc/machine-id The content of this file specifies the machine identification MACHINE-ID. /etc/os-release /usr/lib/os-release Read by 90-loaderentry.install. If available, PRETTY_NAME= is read from these files and used as the title of the boot menu entry. Otherwise, Linux KERNEL-VERSION will be used. /etc/kernel/install.conf /run/kernel/install.conf /usr/local/lib/kernel/install.conf /usr/lib/kernel/install.conf /etc/kernel/install.conf.d/*.conf /run/kernel/install.conf.d/*.conf /usr/local/lib/kernel/install.conf.d/*.conf /usr/lib/kernel/install.conf.d/*.conf Configuration file with options for kernel-install, as a series of KEY=VALUE assignments, compatible with shell syntax, following the same rules as described in os-release5. The first of the files that is found will be used. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for details. Drop-in files may also be used to extend the configuration with overrides, see systemd.unit5. Currently, the following keys are supported: MACHINE_ID=, BOOT_ROOT=, layout=, initrd_generator=, uki_generator=. See the Environment variables section above for details. /etc/kernel/uki.conf Ini-style configuration file for ukify1 which is only effective when $KERNEL_INSTALL_LAYOUT or layout= in install.conf is set to uki and $KERNEL_INSTALL_UKI_GENERATOR or uki_generator= in install.conf is set to ukify, or is unset. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for details. /usr/lib/modules/KERNEL-VERSION/ Location for installed kernel modules and other kernel related resources. For each locally installed kernel a directory named after the kernel version (uname -r) is kept. /usr/lib/modules/KERNEL-VERSION/vmlinuz Location for installed kernel images. This is the recommended location for OS package managers to install kernel images into (as applicable), from which kernel-install add then copies it into the final boot partition. For various cases listed above, if the $KERNEL_INSTALL_CONF_ROOT environment variable is set, it will override the search path. The files will be loaded only from the directory specified by the environment variable. When the variable is not set, the listed paths are tried in turn, and the first file that exists is used. machine-id5 os-release5 depmod8 systemd-boot7 ukify1 Boot Loader Specification