Adding upstream version 4.99.4.upstream/4.99.4

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 215 insertions, 0 deletions

diff --git a/print-zeromq.c b/print-zeromq.c
new file mode 100644
index 0000000..c702046
--- /dev/null
+++ b/print-zeromq.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2013 The TCPDUMP project
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* \summary: ZeroMQ Message Transport Protocol (ZMTP) printer */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include "netdissect-stdinc.h"
+
+#include "netdissect.h"
+#include "extract.h"
+
+
+/* Maximum number of ZMTP/1.0 frame body bytes (without the flags) to dump in
+ * hex and ASCII under a single "-v" flag.
+ */
+#define VBYTES 128
+
+/*
+ * Below is an excerpt from the "13/ZMTP" specification:
+ *
+ * A ZMTP message consists of 1 or more frames.
+ *
+ * A ZMTP frame consists of a length, followed by a flags field and a frame
+ * body of (length - 1) octets. Note: the length includes the flags field, so
+ * an empty frame has a length of 1.
+ *
+ * For frames with a length of 1 to 254 octets, the length SHOULD BE encoded
+ * as a single octet. The minimum valid length of a frame is 1 octet, thus a
+ * length of 0 is invalid and such frames SHOULD be discarded silently.
+ *
+ * For frames with lengths of 255 and greater, the length SHALL BE encoded as
+ * a single octet with the value 255, followed by the length encoded as a
+ * 64-bit unsigned integer in network byte order. For frames with lengths of
+ * 1 to 254 octets this encoding MAY be also used.
+ *
+ * The flags field consists of a single octet containing various control
+ * flags. Bit 0 is the least significant bit.
+ *
+ * - Bit 0 (MORE): More frames to follow. A value of 0 indicates that there
+ *   are no more frames to follow. A value of 1 indicates that more frames
+ *   will follow. On messages consisting of a single frame the MORE flag MUST
+ *   be 0.
+ *
+ * - Bits 1-7: Reserved. Bits 1-7 are reserved for future use and SHOULD be
+ *   zero.
+ */
+
+static const u_char *
+zmtp1_print_frame(netdissect_options *ndo, const u_char *cp, const u_char *ep)
+{
+	uint64_t body_len_declared, body_len_captured, header_len;
+	uint8_t flags;
+
+	ND_PRINT("\n\t");
+
+	if (GET_U_1(cp) != 0xFF) {	/* length/0xFF */
+		header_len = 1; /* length */
+		body_len_declared = GET_U_1(cp);
+		ND_PRINT(" frame flags+body  (8-bit) length %" PRIu64, body_len_declared);
+	} else {
+		header_len = 1 + 8; /* 0xFF, length */
+		ND_PRINT(" frame flags+body (64-bit) length");
+		ND_TCHECK_LEN(cp, header_len); /* 0xFF, length */
+		body_len_declared = GET_BE_U_8(cp + 1);
+		ND_PRINT(" %" PRIu64, body_len_declared);
+	}
+	if (body_len_declared == 0)
+		return cp + header_len; /* skip to the next frame */
+	ND_TCHECK_LEN(cp, header_len + 1); /* ..., flags */
+	flags = GET_U_1(cp + header_len);
+
+	body_len_captured = ep - cp - header_len;
+	if (body_len_declared > body_len_captured)
+		ND_PRINT(" (%" PRIu64 " captured)", body_len_captured);
+	ND_PRINT(", flags 0x%02x", flags);
+
+	if (ndo->ndo_vflag) {
+		uint64_t body_len_printed = ND_MIN(body_len_captured, body_len_declared);
+
+		ND_PRINT(" (%s|%s|%s|%s|%s|%s|%s|%s)",
+			flags & 0x80 ? "MBZ" : "-",
+			flags & 0x40 ? "MBZ" : "-",
+			flags & 0x20 ? "MBZ" : "-",
+			flags & 0x10 ? "MBZ" : "-",
+			flags & 0x08 ? "MBZ" : "-",
+			flags & 0x04 ? "MBZ" : "-",
+			flags & 0x02 ? "MBZ" : "-",
+			flags & 0x01 ? "MORE" : "-");
+
+		if (ndo->ndo_vflag == 1)
+			body_len_printed = ND_MIN(VBYTES + 1, body_len_printed);
+		if (body_len_printed > 1) {
+			ND_PRINT(", first %" PRIu64 " byte(s) of body:", body_len_printed - 1);
+			hex_and_ascii_print(ndo, "\n\t ", cp + header_len + 1, body_len_printed - 1);
+		}
+	}
+
+	/*
+	 * Do not advance cp by the sum of header_len and body_len_declared
+	 * before each offset has successfully passed ND_TCHECK_LEN() as the
+	 * sum can roll over (9 + 0xfffffffffffffff7 = 0) and cause an
+	 * infinite loop.
+	 */
+	cp += header_len;
+	ND_TCHECK_LEN(cp, body_len_declared); /* Next frame within the buffer ? */
+	return cp + body_len_declared;
+
+trunc:
+	nd_trunc_longjmp(ndo);
+}
+
+void
+zmtp1_print(netdissect_options *ndo, const u_char *cp, u_int len)
+{
+	const u_char *ep = ND_MIN(ndo->ndo_snapend, cp + len);
+
+	ndo->ndo_protocol = "zmtp1";
+	ND_PRINT(": ZMTP/1.0");
+	while (cp < ep)
+		cp = zmtp1_print_frame(ndo, cp, ep);
+}
+
+/* The functions below decode a ZeroMQ datagram, supposedly stored in the "Data"
+ * field of an ODATA/RDATA [E]PGM packet. An excerpt from zmq_pgm(7) man page
+ * follows.
+ *
+ * In order for late joining consumers to be able to identify message
+ * boundaries, each PGM datagram payload starts with a 16-bit unsigned integer
+ * in network byte order specifying either the offset of the first message frame
+ * in the datagram or containing the value 0xFFFF if the datagram contains
+ * solely an intermediate part of a larger message.
+ *
+ * Note that offset specifies where the first message begins rather than the
+ * first message part. Thus, if there are trailing message parts at the
+ * beginning of the packet the offset ignores them and points to first initial
+ * message part in the packet.
+ */
+
+static const u_char *
+zmtp1_print_intermediate_part(netdissect_options *ndo, const u_char *cp, const u_int len)
+{
+	u_int frame_offset;
+	u_int remaining_len;
+
+	frame_offset = GET_BE_U_2(cp);
+	ND_PRINT("\n\t frame offset 0x%04x", frame_offset);
+	cp += 2;
+	remaining_len = ND_BYTES_AVAILABLE_AFTER(cp); /* without the frame length */
+
+	if (frame_offset == 0xFFFF)
+		frame_offset = len - 2; /* always within the declared length */
+	else if (2 + frame_offset > len) {
+		ND_PRINT(" (exceeds datagram declared length)");
+		goto trunc;
+	}
+
+	/* offset within declared length of the datagram */
+	if (frame_offset) {
+		ND_PRINT("\n\t frame intermediate part, %u bytes", frame_offset);
+		if (frame_offset > remaining_len)
+			ND_PRINT(" (%u captured)", remaining_len);
+		if (ndo->ndo_vflag) {
+			u_int len_printed = ND_MIN(frame_offset, remaining_len);
+
+			if (ndo->ndo_vflag == 1)
+				len_printed = ND_MIN(VBYTES, len_printed);
+			if (len_printed > 1) {
+				ND_PRINT(", first %u byte(s):", len_printed);
+				hex_and_ascii_print(ndo, "\n\t ", cp, len_printed);
+			}
+		}
+	}
+	return cp + frame_offset;
+
+trunc:
+	nd_trunc_longjmp(ndo);
+}
+
+void
+zmtp1_datagram_print(netdissect_options *ndo, const u_char *cp, const u_int len)
+{
+	const u_char *ep = ND_MIN(ndo->ndo_snapend, cp + len);
+
+	ndo->ndo_protocol = "zmtp1";
+	cp = zmtp1_print_intermediate_part(ndo, cp, len);
+	while (cp < ep)
+		cp = zmtp1_print_frame(ndo, cp, ep);
+}