From 7adcb5b605cc1328a3084c334f4697ec9771936c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 15 Apr 2024 19:13:01 +0200 Subject: Adding upstream version 4.99.4. Signed-off-by: Daniel Baumann --- README.md | 225 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 0000000..566b7b7 --- /dev/null +++ b/README.md @@ -0,0 +1,225 @@ +# TCPDUMP 4.x.y by [The Tcpdump Group](https://www.tcpdump.org/) + +**To report a security issue please send an e-mail to security@tcpdump.org.** + +To report bugs and other problems, contribute patches, request a +feature, provide generic feedback etc please see the +[guidelines for contributing](CONTRIBUTING.md) in the tcpdump source tree root. + +Anonymous Git is available via + + https://github.com/the-tcpdump-group/tcpdump.git + +This directory contains source code for tcpdump, a tool for network +monitoring and data acquisition. + +Over the past few years, tcpdump has been steadily improved by the +excellent contributions from the Internet community (just browse +through the [change log](CHANGES)). We are grateful for all the input. + +### Supported platforms +In many operating systems tcpdump is available as a native package or port, +which simplifies installation of updates and long-term maintenance. However, +the native packages are sometimes a few versions behind and to try a more +recent snapshot it will take to compile tcpdump from the source code. + +tcpdump compiles and works on at least the following platforms: + +* AIX +* DragonFly BSD +* FreeBSD +* Haiku +* HP-UX 11i +* illumos (OmniOS, OpenIndiana) +* GNU/Linux +* {Mac} OS X / macOS +* NetBSD +* OpenBSD +* OpenWrt +* Solaris +* Windows (requires WinPcap or Npcap, and Visual Studio with CMake) + +### Dependency on libpcap +Tcpdump uses libpcap, a system-independent interface for user-level +packet capture. Before building tcpdump, you must first retrieve and +build libpcap. + +Once libpcap is built (either install it or make sure it's in +`../libpcap`), you can build tcpdump using the procedure in the +[installation notes](INSTALL.md). + +### Origins of tcpdump +The program is loosely based on SMI's "etherfind" although none of the +etherfind code remains. It was originally written by Van Jacobson as +part of an ongoing research project to investigate and improve TCP and +Internet gateway performance. The parts of the program originally +taken from Sun's etherfind were later re-written by Steven McCanne of +LBL. To insure that there would be no vestige of proprietary code in +tcpdump, Steve wrote these pieces from the specification given by the +manual entry, with no access to the source of tcpdump or etherfind. +```text +formerly from Lawrence Berkeley National Laboratory + Network Research Group + ftp://ftp.ee.lbl.gov/old/tcpdump.tar.Z (3.4) +``` + +### See also +Richard Stevens gives an excellent treatment of the Internet protocols +in his book *"TCP/IP Illustrated, Volume 1"*. If you want to learn more +about tcpdump and how to interpret its output, pick up this book. + +Another tool that tcpdump users might find useful is +[tcpslice](https://github.com/the-tcpdump-group/tcpslice). +It is a program that can be used to extract portions of tcpdump binary +trace files. + +### The original LBL README by Steve McCanne, Craig Leres and Van Jacobson +``` +This directory also contains some short awk programs intended as +examples of ways to reduce tcpdump data when you're tracking +particular network problems: + +send-ack.awk + Simplifies the tcpdump trace for an ftp (or other unidirectional + tcp transfer). Since we assume that one host only sends and + the other only acks, all address information is left off and + we just note if the packet is a "send" or an "ack". + + There is one output line per line of the original trace. + Field 1 is the packet time in decimal seconds, relative + to the start of the conversation. Field 2 is delta-time + from last packet. Field 3 is packet type/direction. + "Send" means data going from sender to receiver, "ack" + means an ack going from the receiver to the sender. A + preceding "*" indicates that the data is a retransmission. + A preceding "-" indicates a hole in the sequence space + (i.e., missing packet(s)), a "#" means an odd-size (not max + seg size) packet. Field 4 has the packet flags + (same format as raw trace). Field 5 is the sequence + number (start seq. num for sender, next expected seq number + for acks). The number in parens following an ack is + the delta-time from the first send of the packet to the + ack. A number in parens following a send is the + delta-time from the first send of the packet to the + current send (on duplicate packets only). Duplicate + sends or acks have a number in square brackets showing + the number of duplicates so far. + + Here is a short sample from near the start of an ftp: + 3.00 0.20 send . 512 + 3.20 0.20 ack . 1024 (0.20) + 3.20 0.00 send P 1024 + 3.40 0.20 ack . 1536 (0.20) + 3.80 0.40 * send . 0 (3.80) [2] + 3.82 0.02 * ack . 1536 (0.62) [2] + Three seconds into the conversation, bytes 512 through 1023 + were sent. 200ms later they were acked. Shortly thereafter + bytes 1024-1535 were sent and again acked after 200ms. + Then, for no apparent reason, 0-511 is retransmitted, 3.8 + seconds after its initial send (the round trip time for this + ftp was 1sec, +-500ms). Since the receiver is expecting + 1536, 1536 is re-acked when 0 arrives. + +packetdat.awk + Computes chunk summary data for an ftp (or similar + unidirectional tcp transfer). [A "chunk" refers to + a chunk of the sequence space -- essentially the packet + sequence number divided by the max segment size.] + + A summary line is printed showing the number of chunks, + the number of packets it took to send that many chunks + (if there are no lost or duplicated packets, the number + of packets should equal the number of chunks) and the + number of acks. + + Following the summary line is one line of information + per chunk. The line contains eight fields: + 1 - the chunk number + 2 - the start sequence number for this chunk + 3 - time of first send + 4 - time of last send + 5 - time of first ack + 6 - time of last ack + 7 - number of times chunk was sent + 8 - number of times chunk was acked + (all times are in decimal seconds, relative to the start + of the conversation.) + + As an example, here is the first part of the output for + an ftp trace: + + # 134 chunks. 536 packets sent. 508 acks. + 1 1 0.00 5.80 0.20 0.20 4 1 + 2 513 0.28 6.20 0.40 0.40 4 1 + 3 1025 1.16 6.32 1.20 1.20 4 1 + 4 1561 1.86 15.00 2.00 2.00 6 1 + 5 2049 2.16 15.44 2.20 2.20 5 1 + 6 2585 2.64 16.44 2.80 2.80 5 1 + 7 3073 3.00 16.66 3.20 3.20 4 1 + 8 3609 3.20 17.24 3.40 5.82 4 11 + 9 4097 6.02 6.58 6.20 6.80 2 5 + + This says that 134 chunks were transferred (about 70K + since the average packet size was 512 bytes). It took + 536 packets to transfer the data (i.e., on the average + each chunk was transmitted four times). Looking at, + say, chunk 4, we see it represents the 512 bytes of + sequence space from 1561 to 2048. It was first sent + 1.86 seconds into the conversation. It was last + sent 15 seconds into the conversation and was sent + a total of 6 times (i.e., it was retransmitted every + 2 seconds on the average). It was acked once, 140ms + after it first arrived. + +stime.awk +atime.awk + Output one line per send or ack, respectively, in the form +