From 7adcb5b605cc1328a3084c334f4697ec9771936c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 15 Apr 2024 19:13:01 +0200 Subject: Adding upstream version 4.99.4. Signed-off-by: Daniel Baumann --- tcpdump.1.in | 2090 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2090 insertions(+) create mode 100644 tcpdump.1.in (limited to 'tcpdump.1.in') diff --git a/tcpdump.1.in b/tcpdump.1.in new file mode 100644 index 0000000..87e0fbb --- /dev/null +++ b/tcpdump.1.in @@ -0,0 +1,2090 @@ +.\" $NetBSD: tcpdump.8,v 1.9 2003/03/31 00:18:17 perry Exp $ +.\" +.\" Copyright (c) 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1995, 1996, 1997 +.\" The Regents of the University of California. All rights reserved. +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that: (1) source code distributions +.\" retain the above copyright notice and this paragraph in its entirety, (2) +.\" distributions including binary code include the above copyright notice and +.\" this paragraph in its entirety in the documentation or other materials +.\" provided with the distribution, and (3) all advertising materials mentioning +.\" features or use of this software display the following acknowledgement: +.\" ``This product includes software developed by the University of California, +.\" Lawrence Berkeley Laboratory and its contributors.'' Neither the name of +.\" the University nor the names of its contributors may be used to endorse +.\" or promote products derived from this software without specific prior +.\" written permission. +.\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED +.\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF +.\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. +.\" +.TH TCPDUMP 1 "12 March 2023" +.SH NAME +tcpdump \- dump traffic on a network +.SH SYNOPSIS +.na +.B tcpdump +[ +.B \-AbdDefhHIJKlLnNOpqStuUvxX# +] [ +.B \-B +.I buffer_size +] +.br +.ti +8 +[ +.B \-c +.I count +] +[ +.B \-\-count +] +[ +.B \-C +.I file_size +] +.ti +8 +[ +.B \-E +.I spi@ipaddr algo:secret,... +] +.ti +8 +[ +.B \-F +.I file +] +[ +.B \-G +.I rotate_seconds +] +[ +.B \-i +.I interface +] +.ti +8 +[ +.B \-\-immediate\-mode +] +[ +.B \-j +.I tstamp_type +] +[ +.B \-m +.I module +] +.ti +8 +[ +.B \-M +.I secret +] +[ +.B \-\-number +] +[ +.B \-\-print +] +[ +.B \-Q +.I in|out|inout +] +.ti +8 +[ +.B \-r +.I file +] +[ +.B \-s +.I snaplen +] +[ +.B \-T +.I type +] +[ +.B \-\-version +] +.ti +8 +[ +.B \-V +.I file +] +[ +.B \-w +.I file +] +[ +.B \-W +.I filecount +] +[ +.B \-y +.I datalinktype +] +.ti +8 +[ +.B \-z +.I postrotate-command +] +[ +.B \-Z +.I user +] +.ti +8 +[ +.BI \-\-time\-stamp\-precision= tstamp_precision +] +.ti +8 +[ +.BI \-\-micro +] +[ +.BI \-\-nano +] +.ti +8 +[ +.I expression +] +.br +.ad +.SH DESCRIPTION +.LP +\fITcpdump\fP prints out a description of the contents of packets on a +network interface that match the Boolean \fIexpression\fP (see +.BR \%pcap-filter (@MAN_MISC_INFO@) +for the \fIexpression\fP syntax); the +description is preceded by a time stamp, printed, by default, as hours, +minutes, seconds, and fractions of a second since midnight. It can also +be run with the +.B \-w +flag, which causes it to save the packet data to a file for later +analysis, and/or with the +.B \-r +flag, which causes it to read from a saved packet file rather than to +read packets from a network interface. It can also be run with the +.B \-V +flag, which causes it to read a list of saved packet files. In all cases, +only packets that match +.I expression +will be processed by +.IR tcpdump . +.LP +.I Tcpdump +will, if not run with the +.B \-c +flag, continue capturing packets until it is interrupted by a SIGINT +signal (generated, for example, by typing your interrupt character, +typically control-C) or a SIGTERM signal (typically generated with the +.BR kill (1) +command); if run with the +.B \-c +flag, it will capture packets until it is interrupted by a SIGINT or +SIGTERM signal or the specified number of packets have been processed. +.LP +When +.I tcpdump +finishes capturing packets, it will report counts of: +.IP +packets ``captured'' (this is the number of packets that +.I tcpdump +has received and processed); +.IP +packets ``received by filter'' (the meaning of this depends on the OS on +which you're running +.IR tcpdump , +and possibly on the way the OS was configured - if a filter was +specified on the command line, on some OSes it counts packets regardless +of whether they were matched by the filter expression and, even if they +were matched by the filter expression, regardless of whether +.I tcpdump +has read and processed them yet, on other OSes it counts only packets that were +matched by the filter expression regardless of whether +.I tcpdump +has read and processed them yet, and on other OSes it counts only +packets that were matched by the filter expression and were processed by +.IR tcpdump ); +.IP +packets ``dropped by kernel'' (this is the number of packets that were +dropped, due to a lack of buffer space, by the packet capture mechanism +in the OS on which +.I tcpdump +is running, if the OS reports that information to applications; if not, +it will be reported as 0). +.LP +On platforms that support the SIGINFO signal, such as most BSDs +(including macOS) and Digital/Tru64 UNIX, it will report those counts +when it receives a SIGINFO signal (generated, for example, by typing +your ``status'' character, typically control-T, although on some +platforms, such as macOS, the ``status'' character is not set by +default, so you must set it with +.BR stty (1) +in order to use it) and will continue capturing packets. On platforms that +do not support the SIGINFO signal, the same can be achieved by using the +SIGUSR1 signal. +.LP +Using the SIGUSR2 signal along with the +.B \-w +flag will forcibly flush the packet buffer into the output file. +.LP +Reading packets from a network interface may require that you have +special privileges; see the +.BR pcap (3PCAP) +man page for details. Reading a saved packet file doesn't require +special privileges. +.SH OPTIONS +.TP +.B \-A +Print each packet (minus its link level header) in ASCII. Handy for +capturing web pages. +.TP +.B \-b +Print the AS number in BGP packets in ASDOT notation rather than ASPLAIN +notation. +.TP +.BI \-B " buffer_size" +.PD 0 +.TP +.BI \-\-buffer\-size= buffer_size +.PD +Set the operating system capture buffer size to \fIbuffer_size\fP, in +units of KiB (1024 bytes). +.TP +.BI \-c " count" +Exit after receiving \fIcount\fP packets. +.TP +.BI \-\-count +Print only on stdout the packet count when reading capture file(s) instead +of parsing/printing the packets. If a filter is specified on the command +line, \fItcpdump\fP counts only packets that were matched by the filter +expression. +.TP +.BI \-C " file_size" +Before writing a raw packet to a savefile, check whether the file is +currently larger than \fIfile_size\fP and, if so, close the current +savefile and open a new one. Savefiles after the first savefile will +have the name specified with the +.B \-w +flag, with a number after it, starting at 1 and continuing upward. +The units of \fIfile_size\fP are millions of bytes (1,000,000 bytes, +not 1,048,576 bytes). +.TP +.B \-d +Dump the compiled packet-matching code in a human readable form to +standard output and stop. +.IP +Please mind that although code compilation is always DLT-specific, +typically it is impossible (and unnecessary) to specify which DLT to use +for the dump because \fItcpdump\fP uses either the DLT of the input pcap +file specified with +.BR -r , +or the default DLT of the network interface specified with +.BR -i , +or the particular DLT of the network interface specified with +.B -y +and +.B -i +respectively. In these cases the dump shows the same exact code that +would filter the input file or the network interface without +.BR -d . +.IP +However, when neither +.B -r +nor +.B -i +is specified, specifying +.B -d +prevents \fItcpdump\fP from guessing a suitable network interface (see +.BR -i ). +In this case the DLT defaults to EN10MB and can be set to another valid +value manually with +.BR -y . +.TP +.B \-dd +Dump packet-matching code as a +.B C +program fragment. +.TP +.B \-ddd +Dump packet-matching code as decimal numbers (preceded with a count). +.TP +.B \-D +.PD 0 +.TP +.B \-\-list\-interfaces +.PD +Print the list of the network interfaces available on the system and on +which +.I tcpdump +can capture packets. For each network interface, a number and an +interface name, possibly followed by a text description of the +interface, are printed. The interface name or the number can be supplied +to the +.B \-i +flag to specify an interface on which to capture. +.IP +This can be useful on systems that don't have a command to list them +(e.g., Windows systems, or UNIX systems lacking +.BR "ifconfig \-a" ); +the number can be useful on Windows 2000 and later systems, where the +interface name is a somewhat complex string. +.IP +The +.B \-D +flag will not be supported if +.I tcpdump +was built with an older version of +.I libpcap +that lacks the +.BR pcap_findalldevs (3PCAP) +function. +.TP +.B \-e +Print the link-level header on each dump line. This can be used, for +example, to print MAC layer addresses for protocols such as Ethernet and +IEEE 802.11. +.TP +.B \-E +Use \fIspi@ipaddr algo:secret\fP for decrypting IPsec ESP packets that +are addressed to \fIaddr\fP and contain Security Parameter Index value +\fIspi\fP. This combination may be repeated with comma or newline separation. +.IP +Note that setting the secret for IPv4 ESP packets is supported at this time. +.IP +Algorithms may be +\fBdes-cbc\fP, +\fB3des-cbc\fP, +\fBblowfish-cbc\fP, +\fBrc3-cbc\fP, +\fBcast128-cbc\fP, or +\fBnone\fP. +The default is \fBdes-cbc\fP. +The ability to decrypt packets is only present if \fItcpdump\fP was compiled +with cryptography enabled. +.IP +\fIsecret\fP is the ASCII text for ESP secret key. +If preceded by 0x, then a hex value will be read. +.IP +The option assumes RFC 2406 ESP, not RFC 1827 ESP. +The option is only for debugging purposes, and +the use of this option with a true `secret' key is discouraged. +By presenting IPsec secret key onto command line +you make it visible to others, via +.IR ps (1) +and other occasions. +.IP +In addition to the above syntax, the syntax \fIfile name\fP may be used +to have tcpdump read the provided file in. The file is opened upon +receiving the first ESP packet, so any special permissions that tcpdump +may have been given should already have been given up. +.TP +.B \-f +Print `foreign' IPv4 addresses numerically rather than symbolically +(this option is intended to get around serious brain damage in +Sun's NIS server \(em usually it hangs forever translating non-local +internet numbers). +.IP +The test for `foreign' IPv4 addresses is done using the IPv4 address and +netmask of the interface on that capture is being done. If that +address or netmask are not available, either because the +interface on that capture is being done has no address or netmask or +because it is the "any" pseudo-interface, which is +available in Linux and in recent versions of macOS and Solaris, and which +can capture on more than one interface, this option will not work +correctly. +.TP +.BI \-F " file" +Use \fIfile\fP as input for the filter expression. +An additional expression given on the command line is ignored. +.TP +.BI \-G " rotate_seconds" +If specified, rotates the dump file specified with the +.B \-w +option every \fIrotate_seconds\fP seconds. +Savefiles will have the name specified by +.B \-w +which should include a time format as defined by +.BR strftime (3). +If no time format is specified, each new file will overwrite the previous. +Whenever a generated filename is not unique, tcpdump will overwrite the +pre-existing data; providing a time specification that is coarser than the +capture period is therefore not advised. +.IP +If used in conjunction with the +.B \-C +option, filenames will take the form of `\fIfile\fP'. +.TP +.B \-h +.PD 0 +.TP +.B \-\-help +.PD +Print the tcpdump and libpcap version strings, print a usage message, +and exit. +.TP +.B \-\-version +.PD +Print the tcpdump and libpcap version strings and exit. +.TP +.B \-H +Attempt to detect 802.11s draft mesh headers. +.TP +.BI \-i " interface" +.PD 0 +.TP +.BI \-\-interface= interface +.PD +Listen, report the list of link-layer types, report the list of time +stamp types, or report the results of compiling a filter expression on +\fIinterface\fP. If unspecified and if the +.B -d +flag is not given, \fItcpdump\fP searches the system +interface list for the lowest numbered, configured up interface +(excluding loopback), which may turn out to be, for example, ``eth0''. +.IP +On Linux systems with 2.2 or later kernels and on recent versions of macOS +and Solaris, an +.I interface +argument of ``any'' can be used to capture packets from all interfaces. +Note that captures on the ``any'' pseudo-interface will not be done in promiscuous +mode. +.IP +If the +.B \-D +flag is supported, an interface number as printed by that flag can be +used as the +.I interface +argument, if no interface on the system has that number as a name. +.TP +.B \-I +.PD 0 +.TP +.B \-\-monitor\-mode +.PD +Put the interface in "monitor mode"; this is supported only on IEEE +802.11 Wi-Fi interfaces, and supported only on some operating systems. +.IP +Note that in monitor mode the adapter might disassociate from the +network with which it's associated, so that you will not be able to use +any wireless networks with that adapter. This could prevent accessing +files on a network server, or resolving host names or network addresses, +if you are capturing in monitor mode and are not connected to another +network with another adapter. +.IP +This flag will affect the output of the +.B \-L +flag. If +.B \-I +isn't specified, only those link-layer types available when not in +monitor mode will be shown; if +.B \-I +is specified, only those link-layer types available when in monitor mode +will be shown. +.TP +.BI \-\-immediate\-mode +Capture in "immediate mode". In this mode, packets are delivered to +tcpdump as soon as they arrive, rather than being buffered for +efficiency. This is the default when printing packets rather than +saving packets to a ``savefile'' if the packets are being printed to a +terminal rather than to a file or pipe. +.TP +.BI \-j " tstamp_type" +.PD 0 +.TP +.BI \-\-time\-stamp\-type= tstamp_type +.PD +Set the time stamp type for the capture to \fItstamp_type\fP. The names +to use for the time stamp types are given in +.BR \%pcap-tstamp (@MAN_MISC_INFO@); +not all the types listed there will necessarily be valid for any given +interface. +.TP +.B \-J +.PD 0 +.TP +.B \-\-list\-time\-stamp\-types +.PD +List the supported time stamp types for the interface and exit. If the +time stamp type cannot be set for the interface, no time stamp types are +listed. +.TP +.BI \-\-time\-stamp\-precision= tstamp_precision +When capturing, set the time stamp precision for the capture to +\fItstamp_precision\fP. Note that availability of high precision time +stamps (nanoseconds) and their actual accuracy is platform and hardware +dependent. Also note that when writing captures made with nanosecond +accuracy to a savefile, the time stamps are written with nanosecond +resolution, and the file is written with a different magic number, to +indicate that the time stamps are in seconds and nanoseconds; not all +programs that read pcap savefiles will be able to read those captures. +.IP +When reading a savefile, convert time stamps to the precision specified +by \fItimestamp_precision\fP, and display them with that resolution. If +the precision specified is less than the precision of time stamps in the +file, the conversion will lose precision. +.IP +The supported values for \fItimestamp_precision\fP are \fBmicro\fP for +microsecond resolution and \fBnano\fP for nanosecond resolution. The +default is microsecond resolution. +.TP +.B \-\-micro +.PD 0 +.TP +.B \-\-nano +.PD +Shorthands for \fB\-\-time\-stamp\-precision=micro\fP or +\fB\-\-time\-stamp\-precision=nano\fP, adjusting the time stamp +precision accordingly. When reading packets from a savefile, using +\fB\-\-micro\fP truncates time stamps if the savefile was created with +nanosecond precision. In contrast, a savefile created with microsecond +precision will have trailing zeroes added to the time stamp when +\fB\-\-nano\fP is used. +.TP +.B \-K +.PD 0 +.TP +.B \-\-dont\-verify\-checksums +.PD +Don't attempt to verify IP, TCP, or UDP checksums. This is useful for +interfaces that perform some or all of those checksum calculation in +hardware; otherwise, all outgoing TCP checksums will be flagged as bad. +.TP +.B \-l +Make stdout line buffered. +Useful if you want to see the data +while capturing it. +E.g., +.IP +.RS +.RS +.nf +\fBtcpdump \-l | tee dat\fP +.fi +.RE +.RE +.IP +or +.IP +.RS +.RS +.nf +\fBtcpdump \-l > dat & tail \-f dat\fP +.fi +.RE +.RE +.IP +Note that on Windows,``line buffered'' means ``unbuffered'', so that +WinDump will write each character individually if +.B \-l +is specified. +.IP +.B \-U +is similar to +.B \-l +in its behavior, but it will cause output to be ``packet-buffered'', so +that the output is written to stdout at the end of each packet rather +than at the end of each line; this is buffered on all platforms, +including Windows. +.TP +.B \-L +.PD 0 +.TP +.B \-\-list\-data\-link\-types +.PD +List the known data link types for the interface, in the specified mode, +and exit. The list of known data link types may be dependent on the +specified mode; for example, on some platforms, a Wi-Fi interface might +support one set of data link types when not in monitor mode (for +example, it might support only fake Ethernet headers, or might support +802.11 headers but not support 802.11 headers with radio information) +and another set of data link types when in monitor mode (for example, it +might support 802.11 headers, or 802.11 headers with radio information, +only in monitor mode). +.TP +.BI \-m " module" +Load SMI MIB module definitions from file \fImodule\fR. +This option +can be used several times to load several MIB modules into \fItcpdump\fP. +.TP +.BI \-M " secret" +Use \fIsecret\fP as a shared secret for validating the digests found in +TCP segments with the TCP-MD5 option (RFC 2385), if present. +.TP +.B \-n +Don't convert addresses (i.e., host addresses, port numbers, etc.) to names. +.TP +.B \-N +Don't print domain name qualification of host names. +E.g., +if you give this flag then \fItcpdump\fP will print ``nic'' +instead of ``nic.ddn.mil''. +.TP +.B \-# +.PD 0 +.TP +.B \-\-number +.PD +Print an optional packet number at the beginning of the line. +.TP +.B \-O +.PD 0 +.TP +.B \-\-no\-optimize +.PD +Do not run the packet-matching code optimizer. +This is useful only +if you suspect a bug in the optimizer. +.TP +.B \-p +.PD 0 +.TP +.B \-\-no\-promiscuous\-mode +.PD +\fIDon't\fP put the interface +into promiscuous mode. +Note that the interface might be in promiscuous +mode for some other reason; hence, `-p' cannot be used as an abbreviation for +`ether host {local-hw-addr} or ether broadcast'. +.TP +.BI \-\-print +Print parsed packet output, even if the raw packets are being saved to a +file with the +.B \-w +flag. +.TP +.BI \-Q " direction" +.PD 0 +.TP +.BI \-\-direction= direction +.PD +Choose send/receive direction \fIdirection\fR for which packets should be +captured. Possible values are `in', `out' and `inout'. Not available +on all platforms. +.TP +.B \-q +Quick (quiet?) output. +Print less protocol information so output +lines are shorter. +.TP +.BI \-r " file" +Read packets from \fIfile\fR (which was created with the +.B \-w +option or by other tools that write pcap or pcapng files). +Standard input is used if \fIfile\fR is ``-''. +.TP +.B \-S +.PD 0 +.TP +.B \-\-absolute\-tcp\-sequence\-numbers +.PD +Print absolute, rather than relative, TCP sequence numbers. +.TP +.BI \-s " snaplen" +.PD 0 +.TP +.BI \-\-snapshot\-length= snaplen +.PD +Snarf \fIsnaplen\fP bytes of data from each packet rather than the +default of 262144 bytes. +Packets truncated because of a limited snapshot +are indicated in the output with ``[|\fIproto\fP]'', where \fIproto\fP +is the name of the protocol level at which the truncation has occurred. +.IP +Note that taking larger snapshots both increases +the amount of time it takes to process packets and, effectively, +decreases the amount of packet buffering. +This may cause packets to be +lost. +Note also that taking smaller snapshots will discard data from protocols +above the transport layer, which loses information that may be +important. NFS and AFS requests and replies, for example, are very +large, and much of the detail won't be available if a too-short snapshot +length is selected. +.IP +If you need to reduce the snapshot size below the default, you should +limit \fIsnaplen\fP to the smallest number that will capture the +protocol information you're interested in. Setting +\fIsnaplen\fP to 0 sets it to the default of 262144, +for backwards compatibility with recent older versions of +.IR tcpdump . +.TP +.BI \-T " type" +Force packets selected by "\fIexpression\fP" to be interpreted the +specified \fItype\fR. +Currently known types are +\fBaodv\fR (Ad-hoc On-demand Distance Vector protocol), +\fBcarp\fR (Common Address Redundancy Protocol), +\fBcnfp\fR (Cisco NetFlow protocol), +\fBdomain\fR (Domain Name System), +\fBlmp\fR (Link Management Protocol), +\fBpgm\fR (Pragmatic General Multicast), +\fBpgm_zmtp1\fR (ZMTP/1.0 inside PGM/EPGM), +\fBptp\fR (Precision Time Protocol), +\fBradius\fR (RADIUS), +\fBresp\fR (REdis Serialization Protocol), +\fBrpc\fR (Remote Procedure Call), +\fBrtcp\fR (Real-Time Applications control protocol), +\fBrtp\fR (Real-Time Applications protocol), +\fBsnmp\fR (Simple Network Management Protocol), +\fBsomeip\fR (SOME/IP), +\fBtftp\fR (Trivial File Transfer Protocol), +\fBvat\fR (Visual Audio Tool), +\fBvxlan\fR (Virtual eXtensible Local Area Network), +\fBwb\fR (distributed White Board) +and +\fBzmtp1\fR (ZeroMQ Message Transport Protocol 1.0). +.IP +Note that the \fBpgm\fR type above affects UDP interpretation only, the native +PGM is always recognised as IP protocol 113 regardless. UDP-encapsulated PGM is +often called "EPGM" or "PGM/UDP". +.IP +Note that the \fBpgm_zmtp1\fR type above affects interpretation of both native +PGM and UDP at once. During the native PGM decoding the application data of an +ODATA/RDATA packet would be decoded as a ZeroMQ datagram with ZMTP/1.0 frames. +During the UDP decoding in addition to that any UDP packet would be treated as +an encapsulated PGM packet. +.TP +.B \-t +\fIDon't\fP print a timestamp on each dump line. +.TP +.B \-tt +Print the timestamp, as seconds since January 1, 1970, 00:00:00, UTC, and +fractions of a second since that time, on each dump line. +.TP +.B \-ttt +Print a delta (microsecond or nanosecond resolution depending on the +.B \-\-time\-stamp-precision +option) between current and previous line on each dump line. +The default is microsecond resolution. +.TP +.B \-tttt +Print a timestamp, as hours, minutes, seconds, and fractions of a second +since midnight, preceded by the date, on each dump line. +.TP +.B \-ttttt +Print a delta (microsecond or nanosecond resolution depending on the +.B \-\-time\-stamp-precision +option) between current and first line on each dump line. +The default is microsecond resolution. +.TP +.B \-u +Print undecoded NFS handles. +.TP +.B \-U +.PD 0 +.TP +.B \-\-packet\-buffered +.PD +If the +.B \-w +option is not specified, or if it is specified but the +.B \-\-print +flag is also specified, make the printed packet output +``packet-buffered''; i.e., as the description of the contents of each +packet is printed, it will be written to the standard output, rather +than, when not writing to a terminal, being written only when the output +buffer fills. +.IP +If the +.B \-w +option is specified, make the saved raw packet output +``packet-buffered''; i.e., as each packet is saved, it will be written +to the output file, rather than being written only when the output +buffer fills. +.IP +The +.B \-U +flag will not be supported if +.I tcpdump +was built with an older version of +.I libpcap +that lacks the +.BR pcap_dump_flush (3PCAP) +function. +.TP +.B \-v +When parsing and printing, produce (slightly more) verbose output. +For example, the time to live, +identification, total length and options in an IP packet are printed. +Also enables additional packet integrity checks such as verifying the +IP and ICMP header checksum. +.IP +When writing to a file with the +.B \-w +option and at the same time not reading from a file with the +.B \-r +option, report to stderr, once per second, the number of packets captured. In +Solaris, FreeBSD and possibly other operating systems this periodic update +currently can cause loss of captured packets on their way from the kernel to +tcpdump. +.TP +.B \-vv +Even more verbose output. +For example, additional fields are +printed from NFS reply packets, and SMB packets are fully decoded. +.TP +.B \-vvv +Even more verbose output. +For example, +telnet \fBSB\fP ... \fBSE\fP options +are printed in full. +With +.B \-X +Telnet options are printed in hex as well. +.TP +.BI \-V " file" +Read a list of filenames from \fIfile\fR. Standard input is used +if \fIfile\fR is ``-''. +.TP +.BI \-w " file" +Write the raw packets to \fIfile\fR rather than parsing and printing +them out. +They can later be printed with the \-r option. +Standard output is used if \fIfile\fR is ``-''. +.IP +This output will be buffered if written to a file or pipe, so a program +reading from the file or pipe may not see packets for an arbitrary +amount of time after they are received. Use the +.B \-U +flag to cause packets to be written as soon as they are received. +.IP +The MIME type \fIapplication/vnd.tcpdump.pcap\fP has been registered +with IANA for \fIpcap\fP files. The filename extension \fI.pcap\fP +appears to be the most commonly used along with \fI.cap\fP and +\fI.dmp\fP. \fITcpdump\fP itself doesn't check the extension when +reading capture files and doesn't add an extension when writing them +(it uses magic numbers in the file header instead). However, many +operating systems and applications will use the extension if it is +present and adding one (e.g. .pcap) is recommended. +.IP +See +.BR \%pcap-savefile (@MAN_FILE_FORMATS@) +for a description of the file format. +.TP +.BI \-W " filecount" +Used in conjunction with the +.B \-C +option, this will limit the number +of files created to the specified number, and begin overwriting files +from the beginning, thus creating a 'rotating' buffer. +In addition, it will name +the files with enough leading 0s to support the maximum number of +files, allowing them to sort correctly. +.IP +Used in conjunction with the +.B \-G +option, this will limit the number of rotated dump files that get +created, exiting with status 0 when reaching the limit. +.IP +If used in conjunction with both +.B \-C +and +.B \-G, +the +.B \-W +option will currently be ignored, and will only affect the file name. +.TP +.B \-x +When parsing and printing, +in addition to printing the headers of each packet, print the data of +each packet (minus its link level header) in hex. +The smaller of the entire packet or +.I snaplen +bytes will be printed. Note that this is the entire link-layer +packet, so for link layers that pad (e.g. Ethernet), the padding bytes +will also be printed when the higher layer packet is shorter than the +required padding. +In the current implementation this flag may have the same effect as +.B \-xx +if the packet is truncated. +.TP +.B \-xx +When parsing and printing, +in addition to printing the headers of each packet, print the data of +each packet, +.I including +its link level header, in hex. +.TP +.B \-X +When parsing and printing, +in addition to printing the headers of each packet, print the data of +each packet (minus its link level header) in hex and ASCII. +This is very handy for analysing new protocols. +In the current implementation this flag may have the same effect as +.B \-XX +if the packet is truncated. +.TP +.B \-XX +When parsing and printing, +in addition to printing the headers of each packet, print the data of +each packet, +.I including +its link level header, in hex and ASCII. +.TP +.BI \-y " datalinktype" +.PD 0 +.TP +.BI \-\-linktype= datalinktype +.PD +Set the data link type to use while capturing packets (see +.BR -L ) +or just compiling and dumping packet-matching code (see +.BR -d ) +to \fIdatalinktype\fP. +.TP +.BI \-z " postrotate-command" +Used in conjunction with the +.B -C +or +.B -G +options, this will make +.I tcpdump +run " +.I postrotate-command file +" where +.I file +is the savefile being closed after each rotation. For example, specifying +.B \-z gzip +or +.B \-z bzip2 +will compress each savefile using gzip or bzip2. +.IP +Note that tcpdump will run the command in parallel to the capture, using +the lowest priority so that this doesn't disturb the capture process. +.IP +And in case you would like to use a command that itself takes flags or +different arguments, you can always write a shell script that will take the +savefile name as the only argument, make the flags & arguments arrangements +and execute the command that you want. +.TP +.BI \-Z " user" +.PD 0 +.TP +.BI \-\-relinquish\-privileges= user +.PD +If +.I tcpdump +is running as root, after opening the capture device or input savefile, +but before opening any savefiles for output, change the user ID to +.I user +and the group ID to the primary group of +.IR user . +.IP +This behavior can also be enabled by default at compile time. +.IP "\fI expression\fP" +.RS +selects which packets will be dumped. +If no \fIexpression\fP +is given, all packets on the net will be dumped. +Otherwise, +only packets for which \fIexpression\fP is `true' will be dumped. +.LP +For the \fIexpression\fP syntax, see +.BR \%pcap-filter (@MAN_MISC_INFO@). +.LP +The \fIexpression\fP argument can be passed to \fItcpdump\fP as either a single +Shell argument, or as multiple Shell arguments, whichever is more convenient. +Generally, if the expression contains Shell metacharacters, such as +backslashes used to escape protocol names, it is easier to pass it as +a single, quoted argument rather than to escape the Shell +metacharacters. +Multiple arguments are concatenated with spaces before being parsed. +.SH EXAMPLES +.LP +To print all packets arriving at or departing from \fIsundown\fP: +.RS +.nf +\fBtcpdump host sundown\fP +.fi +.RE +.LP +To print traffic between \fIhelios\fR and either \fIhot\fR or \fIace\fR: +.RS +.nf +\fBtcpdump host helios and \\( hot or ace \\)\fP +.fi +.RE +.LP +To print all IP packets between \fIace\fR and any host except \fIhelios\fR: +.RS +.nf +\fBtcpdump ip host ace and not helios\fP +.fi +.RE +.LP +To print all traffic between local hosts and hosts at Berkeley: +.RS +.nf +.B +tcpdump net ucb-ether +.fi +.RE +.LP +To print all ftp traffic through internet gateway \fIsnup\fP: +(note that the expression is quoted to prevent the shell from +(mis-)interpreting the parentheses): +.RS +.nf +.B +tcpdump 'gateway snup and (port ftp or ftp-data)' +.fi +.RE +.LP +To print traffic neither sourced from nor destined for local hosts +(if you gateway to one other net, this stuff should never make it +onto your local net). +.RS +.nf +.B +tcpdump ip and not net \fIlocalnet\fP +.fi +.RE +.LP +To print the start and end packets (the SYN and FIN packets) of each +TCP conversation that involves a non-local host. +.RS +.nf +.B +tcpdump 'tcp[tcpflags] & (tcp-syn|tcp-fin) != 0 and not src and dst net \fIlocalnet\fP' +.fi +.RE +.LP +To print the TCP packets with flags RST and ACK both set. +(i.e. select only the RST and ACK flags in the flags field, and if the result +is "RST and ACK both set", match) +.RS +.nf +.B +tcpdump 'tcp[tcpflags] & (tcp-rst|tcp-ack) == (tcp-rst|tcp-ack)' +.fi +.RE +.LP +To print all IPv4 HTTP packets to and from port 80, i.e. print only +packets that contain data, not, for example, SYN and FIN packets and +ACK-only packets. (IPv6 is left as an exercise for the reader.) +.RS +.nf +.B +tcpdump 'tcp port 80 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' +.fi +.RE +.LP +To print IP packets longer than 576 bytes sent through gateway \fIsnup\fP: +.RS +.nf +.B +tcpdump 'gateway snup and ip[2:2] > 576' +.fi +.RE +.LP +To print IP broadcast or multicast packets that were +.I not +sent via Ethernet broadcast or multicast: +.RS +.nf +.B +tcpdump 'ether[0] & 1 = 0 and ip[16] >= 224' +.fi +.RE +.LP +To print all ICMP packets that are not echo requests/replies (i.e., not +ping packets): +.RS +.nf +.B +tcpdump 'icmp[icmptype] != icmp-echo and icmp[icmptype] != icmp-echoreply' +.fi +.RE +.SH OUTPUT FORMAT +.LP +The output of \fItcpdump\fP is protocol dependent. +The following +gives a brief description and examples of most of the formats. +.de HD +.sp 1.5 +.B +.. +.HD +Timestamps +.LP +By default, all output lines are preceded by a timestamp. +The timestamp +is the current clock time in the form +.RS +.nf +\fIhh:mm:ss.frac\fP +.fi +.RE +and is as accurate as the kernel's clock. +The timestamp reflects the time the kernel applied a time stamp to the packet. +No attempt is made to account for the time lag between when the network +interface finished receiving the packet from the network and when the +kernel applied a time stamp to the packet; that time lag could include a +delay between the time when the network interface finished receiving a +packet from the network and the time when an interrupt was delivered to +the kernel to get it to read the packet and a delay between the time +when the kernel serviced the `new packet' interrupt and the time when it +applied a time stamp to the packet. +.HD +Link Level Headers +.LP +If the '-e' option is given, the link level header is printed out. +On Ethernets, the source and destination addresses, protocol, +and packet length are printed. +.LP +On FDDI networks, the '-e' option causes \fItcpdump\fP to print +the `frame control' field, the source and destination addresses, +and the packet length. +(The `frame control' field governs the +interpretation of the rest of the packet. +Normal packets (such +as those containing IP datagrams) are `async' packets, with a priority +value between 0 and 7; for example, `\fBasync4\fR'. +Such packets +are assumed to contain an 802.2 Logical Link Control (LLC) packet; +the LLC header is printed if it is \fInot\fR an ISO datagram or a +so-called SNAP packet. +.LP +On Token Ring networks, the '-e' option causes \fItcpdump\fP to print +the `access control' and `frame control' fields, the source and +destination addresses, and the packet length. +As on FDDI networks, +packets are assumed to contain an LLC packet. +Regardless of whether +the '-e' option is specified or not, the source routing information is +printed for source-routed packets. +.LP +On 802.11 networks, the '-e' option causes \fItcpdump\fP to print +the `frame control' fields, all of the addresses in the 802.11 header, +and the packet length. +As on FDDI networks, +packets are assumed to contain an LLC packet. +.LP +\fI(N.B.: The following description assumes familiarity with +the SLIP compression algorithm described in RFC 1144.)\fP +.LP +On SLIP links, a direction indicator (``I'' for inbound, ``O'' for outbound), +packet type, and compression information are printed out. +The packet type is printed first. +The three types are \fIip\fP, \fIutcp\fP, and \fIctcp\fP. +No further link information is printed for \fIip\fR packets. +For TCP packets, the connection identifier is printed following the type. +If the packet is compressed, its encoded header is printed out. +The special cases are printed out as +\fB*S+\fIn\fR and \fB*SA+\fIn\fR, where \fIn\fR is the amount by which +the sequence number (or sequence number and ack) has changed. +If it is not a special case, +zero or more changes are printed. +A change is indicated by U (urgent pointer), W (window), A (ack), +S (sequence number), and I (packet ID), followed by a delta (+n or -n), +or a new value (=n). +Finally, the amount of data in the packet and compressed header length +are printed. +.LP +For example, the following line shows an outbound compressed TCP packet, +with an implicit connection identifier; the ack has changed by 6, +the sequence number by 49, and the packet ID by 6; there are 3 bytes of +data and 6 bytes of compressed header: +.RS +.nf +\fBO ctcp * A+6 S+49 I+6 3 (6)\fP +.fi +.RE +.HD +ARP/RARP Packets +.LP +ARP/RARP output shows the type of request and its arguments. +The +format is intended to be self explanatory. +Here is a short sample taken from the start of an `rlogin' from +host \fIrtsg\fP to host \fIcsam\fP: +.RS +.nf +.sp .5 +\f(CWarp who-has csam tell rtsg +arp reply csam is-at CSAM\fR +.sp .5 +.fi +.RE +The first line says that rtsg sent an ARP packet asking +for the Ethernet address of internet host csam. +Csam +replies with its Ethernet address (in this example, Ethernet addresses +are in caps and internet addresses in lower case). +.LP +This would look less redundant if we had done \fItcpdump \-n\fP: +.RS +.nf +.sp .5 +\f(CWarp who-has 128.3.254.6 tell 128.3.254.68 +arp reply 128.3.254.6 is-at 02:07:01:00:01:c4\fP +.fi +.RE +.LP +If we had done \fItcpdump \-e\fP, the fact that the first packet is +broadcast and the second is point-to-point would be visible: +.RS +.nf +.sp .5 +\f(CWRTSG Broadcast 0806 64: arp who-has csam tell rtsg +CSAM RTSG 0806 64: arp reply csam is-at CSAM\fR +.sp .5 +.fi +.RE +For the first packet this says the Ethernet source address is RTSG, the +destination is the Ethernet broadcast address, the type field +contained hex 0806 (type ETHER_ARP) and the total length was 64 bytes. +.HD +IPv4 Packets +.LP +If the link-layer header is not being printed, for IPv4 packets, +\fBIP\fP is printed after the time stamp. +.LP +If the +.B \-v +flag is specified, information from the IPv4 header is shown in +parentheses after the \fBIP\fP or the link-layer header. +The general format of this information is: +.RS +.nf +.sp .5 +tos \fItos\fP, ttl \fIttl\fP, id \fIid\fP, offset \fIoffset\fP, flags [\fIflags\fP], proto \fIproto\fP, length \fIlength\fP, options (\fIoptions\fP) +.sp .5 +.fi +.RE +\fItos\fP is the type of service field; if the ECN bits are non-zero, +those are reported as \fBECT(1)\fP, \fBECT(0)\fP, or \fBCE\fP. +\fIttl\fP is the time-to-live; it is not reported if it is zero. +\fIid\fP is the IP identification field. +\fIoffset\fP is the fragment offset field; it is printed whether this is +part of a fragmented datagram or not. +\fIflags\fP are the MF and DF flags; \fB+\fP is reported if MF is set, +and \fBDF\fP is reported if F is set. If neither are set, \fB.\fP is +reported. +\fIproto\fP is the protocol ID field. +\fIlength\fP is the total length field. +\fIoptions\fP are the IP options, if any. +.LP +Next, for TCP and UDP packets, the source and destination IP addresses +and TCP or UDP ports, with a dot between each IP address and its +corresponding port, will be printed, with a > separating the source and +destination. For other protocols, the addresses will be printed, with +a > separating the source and destination. Higher level protocol +information, if any, will be printed after that. +.LP +For fragmented IP datagrams, the first fragment contains the higher +level protocol header; fragments after the first contain no higher level +protocol header. Fragmentation information will be printed only with +the +.B \-v +flag, in the IP header information, as described above. +.HD +TCP Packets +.LP +\fI(N.B.:The following description assumes familiarity with +the TCP protocol described in RFC 793. +If you are not familiar +with the protocol, this description will not +be of much use to you.)\fP +.LP +The general format of a TCP protocol line is: +.RS +.nf +.sp .5 +\fIsrc\fP > \fIdst\fP: Flags [\fItcpflags\fP], seq \fIdata-seqno\fP, ack \fIackno\fP, win \fIwindow\fP, urg \fIurgent\fP, options [\fIopts\fP], length \fIlen\fP +.sp .5 +.fi +.RE +\fISrc\fP and \fIdst\fP are the source and destination IP +addresses and ports. +\fITcpflags\fP are some combination of S (SYN), +F (FIN), P (PSH), R (RST), U (URG), W (CWR), E (ECE) or +`.' (ACK), or `none' if no flags are set. +\fIData-seqno\fP describes the portion of sequence space covered +by the data in this packet (see example below). +\fIAckno\fP is sequence number of the next data expected the other +direction on this connection. +\fIWindow\fP is the number of bytes of receive buffer space available +the other direction on this connection. +\fIUrg\fP indicates there is `urgent' data in the packet. +\fIOpts\fP are TCP options (e.g., mss 1024). +\fILen\fP is the length of payload data. +.LP +\fIIptype\fR, \fISrc\fP, \fIdst\fP, and \fIflags\fP are always present. +The other fields +depend on the contents of the packet's TCP protocol header and +are output only if appropriate. +.LP +Here is the opening portion of an rlogin from host \fIrtsg\fP to +host \fIcsam\fP. +.RS +.nf +.sp .5 +\f(CWIP rtsg.1023 > csam.login: Flags [S], seq 768512:768512, win 4096, opts [mss 1024] +IP csam.login > rtsg.1023: Flags [S.], seq, 947648:947648, ack 768513, win 4096, opts [mss 1024] +IP rtsg.1023 > csam.login: Flags [.], ack 1, win 4096 +IP rtsg.1023 > csam.login: Flags [P.], seq 1:2, ack 1, win 4096, length 1 +IP csam.login > rtsg.1023: Flags [.], ack 2, win 4096 +IP rtsg.1023 > csam.login: Flags [P.], seq 2:21, ack 1, win 4096, length 19 +IP csam.login > rtsg.1023: Flags [P.], seq 1:2, ack 21, win 4077, length 1 +IP csam.login > rtsg.1023: Flags [P.], seq 2:3, ack 21, win 4077, urg 1, length 1 +IP csam.login > rtsg.1023: Flags [P.], seq 3:4, ack 21, win 4077, urg 1, length 1\fR +.sp .5 +.fi +.RE +The first line says that TCP port 1023 on rtsg sent a packet +to port \fIlogin\fP +on csam. +The \fBS\fP indicates that the \fISYN\fP flag was set. +The packet sequence number was 768512 and it contained no data. +(The notation is `first:last' which means `sequence +numbers \fIfirst\fP +up to but not including \fIlast\fP'.) +There was no piggy-backed ACK, the available receive window was 4096 +bytes and there was a max-segment-size option requesting an MSS of +1024 bytes. +.LP +Csam replies with a similar packet except it includes a piggy-backed +ACK for rtsg's SYN. +Rtsg then ACKs csam's SYN. +The `.' means the ACK flag was set. +The packet contained no data so there is no data sequence number or length. +Note that the ACK sequence +number is a small integer (1). +The first time \fItcpdump\fP sees a +TCP `conversation', it prints the sequence number from the packet. +On subsequent packets of the conversation, the difference between +the current packet's sequence number and this initial sequence number +is printed. +This means that sequence numbers after the +first can be interpreted +as relative byte positions in the conversation's data stream (with the +first data byte each direction being `1'). +`-S' will override this +feature, causing the original sequence numbers to be output. +.LP +On the 6th line, rtsg sends csam 19 bytes of data (bytes 2 through 20 +in the rtsg \(-> csam side of the conversation). +The PSH flag is set in the packet. +On the 7th line, csam says it's received data sent by rtsg up to +but not including byte 21. +Most of this data is apparently sitting in the +socket buffer since csam's receive window has gotten 19 bytes smaller. +Csam also sends one byte of data to rtsg in this packet. +On the 8th and 9th lines, +csam sends two bytes of urgent, pushed data to rtsg. +.LP +If the snapshot was small enough that \fItcpdump\fP didn't capture +the full TCP header, it interprets as much of the header as it can +and then reports ``[|\fItcp\fP]'' to indicate the remainder could not +be interpreted. +If the header contains a bogus option (one with a length +that's either too small or beyond the end of the header), \fItcpdump\fP +reports it as ``[\fIbad opt\fP]'' and does not interpret any further +options (since it's impossible to tell where they start). +If the header +length indicates options are present but the IP datagram length is not +long enough for the options to actually be there, \fItcpdump\fP reports +it as ``[\fIbad hdr length\fP]''. +.HD +.B Capturing TCP packets with particular flag combinations (SYN-ACK, URG-ACK, etc.) +.PP +There are 8 bits in the control bits section of the TCP header: +.IP +.I CWR | ECE | URG | ACK | PSH | RST | SYN | FIN +.PP +Let's assume that we want to watch packets used in establishing +a TCP connection. +Recall that TCP uses a 3-way handshake protocol +when it initializes a new connection; the connection sequence with +regard to the TCP control bits is +.PP +.RS +1) Caller sends SYN +.RE +.RS +2) Recipient responds with SYN, ACK +.RE +.RS +3) Caller sends ACK +.RE +.PP +Now we're interested in capturing packets that have only the +SYN bit set (Step 1). +Note that we don't want packets from step 2 +(SYN-ACK), just a plain initial SYN. +What we need is a correct filter +expression for \fItcpdump\fP. +.PP +Recall the structure of a TCP header without options: +.PP +.nf + 0 15 31 +----------------------------------------------------------------- +| source port | destination port | +----------------------------------------------------------------- +| sequence number | +----------------------------------------------------------------- +| acknowledgment number | +----------------------------------------------------------------- +| HL | rsvd |C|E|U|A|P|R|S|F| window size | +----------------------------------------------------------------- +| TCP checksum | urgent pointer | +----------------------------------------------------------------- +.fi +.PP +A TCP header usually holds 20 octets of data, unless options are +present. +The first line of the graph contains octets 0 - 3, the +second line shows octets 4 - 7 etc. +.PP +Starting to count with 0, the relevant TCP control bits are contained +in octet 13: +.PP +.nf + 0 7| 15| 23| 31 +----------------|---------------|---------------|---------------- +| HL | rsvd |C|E|U|A|P|R|S|F| window size | +----------------|---------------|---------------|---------------- +| | 13th octet | | | +.fi +.PP +Let's have a closer look at octet no. 13: +.PP +.nf + | | + |---------------| + |C|E|U|A|P|R|S|F| + |---------------| + |7 5 3 0| +.fi +.PP +These are the TCP control bits we are interested +in. +We have numbered the bits in this octet from 0 to 7, right to +left, so the PSH bit is bit number 3, while the URG bit is number 5. +.PP +Recall that we want to capture packets with only SYN set. +Let's see what happens to octet 13 if a TCP datagram arrives +with the SYN bit set in its header: +.PP +.nf + |C|E|U|A|P|R|S|F| + |---------------| + |0 0 0 0 0 0 1 0| + |---------------| + |7 6 5 4 3 2 1 0| +.fi +.PP +Looking at the +control bits section we see that only bit number 1 (SYN) is set. +.PP +Assuming that octet number 13 is an 8-bit unsigned integer in +network byte order, the binary value of this octet is +.IP +00000010 +.PP +and its decimal representation is +.PP +.nf + 7 6 5 4 3 2 1 0 +0*2 + 0*2 + 0*2 + 0*2 + 0*2 + 0*2 + 1*2 + 0*2 = 2 +.fi +.PP +We're almost done, because now we know that if only SYN is set, +the value of the 13th octet in the TCP header, when interpreted +as a 8-bit unsigned integer in network byte order, must be exactly 2. +.PP +This relationship can be expressed as +.RS +.B +tcp[13] == 2 +.RE +.PP +We can use this expression as the filter for \fItcpdump\fP in order +to watch packets which have only SYN set: +.RS +.B +tcpdump -i xl0 tcp[13] == 2 +.RE +.PP +The expression says "let the 13th octet of a TCP datagram have +the decimal value 2", which is exactly what we want. +.PP +Now, let's assume that we need to capture SYN packets, but we +don't care if ACK or any other TCP control bit is set at the +same time. +Let's see what happens to octet 13 when a TCP datagram +with SYN-ACK set arrives: +.PP +.nf + |C|E|U|A|P|R|S|F| + |---------------| + |0 0 0 1 0 0 1 0| + |---------------| + |7 6 5 4 3 2 1 0| +.fi +.PP +Now bits 1 and 4 are set in the 13th octet. +The binary value of +octet 13 is +.IP + 00010010 +.PP +which translates to decimal +.PP +.nf + 7 6 5 4 3 2 1 0 +0*2 + 0*2 + 0*2 + 1*2 + 0*2 + 0*2 + 1*2 + 0*2 = 18 +.fi +.PP +Now we can't just use 'tcp[13] == 18' in the \fItcpdump\fP filter +expression, because that would select only those packets that have +SYN-ACK set, but not those with only SYN set. +Remember that we don't care +if ACK or any other control bit is set as long as SYN is set. +.PP +In order to achieve our goal, we need to logically AND the +binary value of octet 13 with some other value to preserve +the SYN bit. +We know that we want SYN to be set in any case, +so we'll logically AND the value in the 13th octet with +the binary value of a SYN: +.PP +.nf + + 00010010 SYN-ACK 00000010 SYN + AND 00000010 (we want SYN) AND 00000010 (we want SYN) + -------- -------- + = 00000010 = 00000010 +.fi +.PP +We see that this AND operation delivers the same result +regardless whether ACK or another TCP control bit is set. +The decimal representation of the AND value as well as +the result of this operation is 2 (binary 00000010), +so we know that for packets with SYN set the following +relation must hold true: +.IP +( ( value of octet 13 ) AND ( 2 ) ) == ( 2 ) +.PP +This points us to the \fItcpdump\fP filter expression +.RS +.B + tcpdump -i xl0 'tcp[13] & 2 == 2' +.RE +.PP +Some offsets and field values may be expressed as names +rather than as numeric values. For example tcp[13] may +be replaced with tcp[tcpflags]. The following TCP flag +field values are also available: tcp-fin, tcp-syn, tcp-rst, +tcp-push, tcp-ack, tcp-urg, tcp-ece and tcp-cwr. +.PP +This can be demonstrated as: +.RS +.B + tcpdump -i xl0 'tcp[tcpflags] & tcp-push != 0' +.RE +.PP +Note that you should use single quotes or a backslash +in the expression to hide the AND ('&') special character +from the shell. +.HD +.B +UDP Packets +.LP +UDP format is illustrated by this rwho packet: +.RS +.nf +.sp .5 +\f(CWactinide.who > broadcast.who: udp 84\fP +.sp .5 +.fi +.RE +This says that port \fIwho\fP on host \fIactinide\fP sent a UDP +datagram to port \fIwho\fP on host \fIbroadcast\fP, the Internet +broadcast address. +The packet contained 84 bytes of user data. +.LP +Some UDP services are recognized (from the source or destination +port number) and the higher level protocol information printed. +In particular, Domain Name service requests (RFC 1034/1035) and Sun +RPC calls (RFC 1050) to NFS. +.HD +TCP or UDP Name Server Requests +.LP +\fI(N.B.:The following description assumes familiarity with +the Domain Service protocol described in RFC 1035. +If you are not familiar +with the protocol, the following description will appear to be written +in Greek.)\fP +.LP +Name server requests are formatted as +.RS +.nf +.sp .5 +\fIsrc > dst: id op? flags qtype qclass name (len)\fP +.sp .5 +\f(CWh2opolo.1538 > helios.domain: 3+ A? ucbvax.berkeley.edu. (37)\fR +.sp .5 +.fi +.RE +Host \fIh2opolo\fP asked the domain server on \fIhelios\fP for an +address record (qtype=A) associated with the name \fIucbvax.berkeley.edu.\fP +The query id was `3'. +The `+' indicates the \fIrecursion desired\fP flag +was set. +The query length was 37 bytes, excluding the TCP or UDP and +IP protocol headers. +The query operation was the normal one, \fIQuery\fP, +so the op field was omitted. +If the op had been anything else, it would +have been printed between the `3' and the `+'. +Similarly, the qclass was the normal one, +\fIC_IN\fP, and omitted. +Any other qclass would have been printed +immediately after the `A'. +.LP +A few anomalies are checked and may result in extra fields enclosed in +square brackets: If a query contains an answer, authority records or +additional records section, +.IR ancount , +.IR nscount , +or +.I arcount +are printed as `[\fIn\fPa]', `[\fIn\fPn]' or `[\fIn\fPau]' where \fIn\fP +is the appropriate count. +If any of the response bits are set (AA, RA or rcode) or any of the +`must be zero' bits are set in bytes two and three, `[b2&3=\fIx\fP]' +is printed, where \fIx\fP is the hex value of header bytes two and three. +.HD +TCP or UDP Name Server Responses +.LP +Name server responses are formatted as +.RS +.nf +.sp .5 +\fIsrc > dst: id op rcode flags a/n/au type class data (len)\fP +.sp .5 +\f(CWhelios.domain > h2opolo.1538: 3 3/3/7 A 128.32.137.3 (273) +helios.domain > h2opolo.1537: 2 NXDomain* 0/1/0 (97)\fR +.sp .5 +.fi +.RE +In the first example, \fIhelios\fP responds to query id 3 from \fIh2opolo\fP +with 3 answer records, 3 name server records and 7 additional records. +The first answer record is type A (address) and its data is internet +address 128.32.137.3. +The total size of the response was 273 bytes, +excluding TCP or UDP and IP headers. +The op (Query) and response code +(NoError) were omitted, as was the class (C_IN) of the A record. +.LP +In the second example, \fIhelios\fP responds to query 2 with a +response code of non-existent domain (NXDomain) with no answers, +one name server and no authority records. +The `*' indicates that +the \fIauthoritative answer\fP bit was set. +Since there were no +answers, no type, class or data were printed. +.LP +Other flag characters that might appear are `\-' (recursion available, +RA, \fInot\fP set) and `|' (truncated message, TC, set). +If the +`question' section doesn't contain exactly one entry, `[\fIn\fPq]' +is printed. +.HD +SMB/CIFS decoding +.LP +\fItcpdump\fP now includes fairly extensive SMB/CIFS/NBT decoding for data +on UDP/137, UDP/138 and TCP/139. +Some primitive decoding of IPX and +NetBEUI SMB data is also done. +.LP +By default a fairly minimal decode is done, with a much more detailed +decode done if -v is used. +Be warned that with -v a single SMB packet +may take up a page or more, so only use -v if you really want all the +gory details. +.LP +For information on SMB packet formats and what all the fields mean see +\%https://download.samba.org/pub/samba/specs/ and other online resources. +The SMB patches were written by Andrew Tridgell +(tridge@samba.org). +.HD +NFS Requests and Replies +.LP +Sun NFS (Network File System) requests and replies are printed as: +.RS +.nf +.sp .5 +\fIsrc.sport > dst.nfs: NFS request xid xid len op args\fP +\fIsrc.nfs > dst.dport: NFS reply xid xid reply stat len op results\fP +.sp .5 +\f(CW +sushi.1023 > wrl.nfs: NFS request xid 26377 + 112 readlink fh 21,24/10.73165 +wrl.nfs > sushi.1023: NFS reply xid 26377 + reply ok 40 readlink "../var" +sushi.1022 > wrl.nfs: NFS request xid 8219 + 144 lookup fh 9,74/4096.6878 "xcolors" +wrl.nfs > sushi.1022: NFS reply xid 8219 + reply ok 128 lookup fh 9,74/4134.3150 +\fR +.sp .5 +.fi +.RE +In the first line, host \fIsushi\fP sends a transaction with id \fI26377\fP +to \fIwrl\fP. +The request was 112 bytes, +excluding the UDP and IP headers. +The operation was a \fIreadlink\fP +(read symbolic link) on file handle (\fIfh\fP) 21,24/10.731657119. +(If one is lucky, as in this case, the file handle can be interpreted +as a major,minor device number pair, followed by the inode number and +generation number.) In the second line, \fIwrl\fP replies `ok' with +the same transaction id and the contents of the link. +.LP +In the third line, \fIsushi\fP asks (using a new transaction id) \fIwrl\fP +to lookup the name `\fIxcolors\fP' in directory file 9,74/4096.6878. In +the fourth line, \fIwrl\fP sends a reply with the respective transaction id. +.LP +Note that the data printed +depends on the operation type. +The format is intended to be self +explanatory if read in conjunction with +an NFS protocol spec. +Also note that older versions of tcpdump printed NFS packets in a +slightly different format: the transaction id (xid) would be printed +instead of the non-NFS port number of the packet. +.LP +If the \-v (verbose) flag is given, additional information is printed. +For example: +.RS +.nf +.sp .5 +\f(CW +sushi.1023 > wrl.nfs: NFS request xid 79658 + 148 read fh 21,11/12.195 8192 bytes @ 24576 +wrl.nfs > sushi.1023: NFS reply xid 79658 + reply ok 1472 read REG 100664 ids 417/0 sz 29388 +\fP +.sp .5 +.fi +.RE +(\-v also prints the IP header TTL, ID, length, and fragmentation fields, +which have been omitted from this example.) In the first line, +\fIsushi\fP asks \fIwrl\fP to read 8192 bytes from file 21,11/12.195, +at byte offset 24576. +\fIWrl\fP replies `ok'; the packet shown on the +second line is the first fragment of the reply, and hence is only 1472 +bytes long (the other bytes will follow in subsequent fragments, but +these fragments do not have NFS or even UDP headers and so might not be +printed, depending on the filter expression used). +Because the \-v flag +is given, some of the file attributes (which are returned in addition +to the file data) are printed: the file type (``REG'', for regular file), +the file mode (in octal), the UID and GID, and the file size. +.LP +If the \-v flag is given more than once, even more details are printed. +.LP +NFS reply packets do not explicitly identify the RPC operation. +Instead, +\fItcpdump\fP keeps track of ``recent'' requests, and matches them to the +replies using the transaction ID. +If a reply does not closely follow the +corresponding request, it might not be parsable. +.HD +AFS Requests and Replies +.LP +Transarc AFS (Andrew File System) requests and replies are printed +as: +.HD +.RS +.nf +.sp .5 +\fIsrc.sport > dst.dport: rx packet-type\fP +\fIsrc.sport > dst.dport: rx packet-type service call call-name args\fP +\fIsrc.sport > dst.dport: rx packet-type service reply call-name args\fP +.sp .5 +\f(CW +elvis.7001 > pike.afsfs: + rx data fs call rename old fid 536876964/1/1 ".newsrc.new" + new fid 536876964/1/1 ".newsrc" +pike.afsfs > elvis.7001: rx data fs reply rename +\fR +.sp .5 +.fi +.RE +In the first line, host elvis sends a RX packet to pike. +This was +a RX data packet to the fs (fileserver) service, and is the start of +an RPC call. +The RPC call was a rename, with the old directory file id +of 536876964/1/1 and an old filename of `.newsrc.new', and a new directory +file id of 536876964/1/1 and a new filename of `.newsrc'. +The host pike +responds with a RPC reply to the rename call (which was successful, because +it was a data packet and not an abort packet). +.LP +In general, all AFS RPCs are decoded at least by RPC call name. +Most +AFS RPCs have at least some of the arguments decoded (generally only +the `interesting' arguments, for some definition of interesting). +.LP +The format is intended to be self-describing, but it will probably +not be useful to people who are not familiar with the workings of +AFS and RX. +.LP +If the -v (verbose) flag is given twice, acknowledgement packets and +additional header information is printed, such as the RX call ID, +call number, sequence number, serial number, and the RX packet flags. +.LP +If the -v flag is given twice, additional information is printed, +such as the RX call ID, serial number, and the RX packet flags. +The MTU negotiation information is also printed from RX ack packets. +.LP +If the -v flag is given three times, the security index and service id +are printed. +.LP +Error codes are printed for abort packets, with the exception of Ubik +beacon packets (because abort packets are used to signify a yes vote +for the Ubik protocol). +.LP +AFS reply packets do not explicitly identify the RPC operation. +Instead, +\fItcpdump\fP keeps track of ``recent'' requests, and matches them to the +replies using the call number and service ID. +If a reply does not closely +follow the +corresponding request, it might not be parsable. + +.HD +KIP AppleTalk (DDP in UDP) +.LP +AppleTalk DDP packets encapsulated in UDP datagrams are de-encapsulated +and dumped as DDP packets (i.e., all the UDP header information is +discarded). +The file +.I /etc/atalk.names +is used to translate AppleTalk net and node numbers to names. +Lines in this file have the form +.RS +.nf +.sp .5 +\fInumber name\fP + +\f(CW1.254 ether +16.1 icsd-net +1.254.110 ace\fR +.sp .5 +.fi +.RE +The first two lines give the names of AppleTalk networks. +The third +line gives the name of a particular host (a host is distinguished +from a net by the 3rd octet in the number \- +a net number \fImust\fP have two octets and a host number \fImust\fP +have three octets.) The number and name should be separated by +whitespace (blanks or tabs). +The +.I /etc/atalk.names +file may contain blank lines or comment lines (lines starting with +a `#'). +.LP +AppleTalk addresses are printed in the form +.RS +.nf +.sp .5 +\fInet.host.port\fP + +\f(CW144.1.209.2 > icsd-net.112.220 +office.2 > icsd-net.112.220 +jssmag.149.235 > icsd-net.2\fR +.sp .5 +.fi +.RE +(If the +.I /etc/atalk.names +doesn't exist or doesn't contain an entry for some AppleTalk +host/net number, addresses are printed in numeric form.) +In the first example, NBP (DDP port 2) on net 144.1 node 209 +is sending to whatever is listening on port 220 of net icsd node 112. +The second line is the same except the full name of the source node +is known (`office'). +The third line is a send from port 235 on +net jssmag node 149 to broadcast on the icsd-net NBP port (note that +the broadcast address (255) is indicated by a net name with no host +number \- for this reason it's a good idea to keep node names and +net names distinct in /etc/atalk.names). +.LP +NBP (name binding protocol) and ATP (AppleTalk transaction protocol) +packets have their contents interpreted. +Other protocols just dump +the protocol name (or number if no name is registered for the +protocol) and packet size. + +\fBNBP packets\fP are formatted like the following examples: +.RS +.nf +.sp .5 +\f(CWicsd-net.112.220 > jssmag.2: nbp-lkup 190: "=:LaserWriter@*" +jssmag.209.2 > icsd-net.112.220: nbp-reply 190: "RM1140:LaserWriter@*" 250 +techpit.2 > icsd-net.112.220: nbp-reply 190: "techpit:LaserWriter@*" 186\fR +.sp .5 +.fi +.RE +The first line is a name lookup request for laserwriters sent by net icsd host +112 and broadcast on net jssmag. +The nbp id for the lookup is 190. +The second line shows a reply for this request (note that it has the +same id) from host jssmag.209 saying that it has a laserwriter +resource named "RM1140" registered on port 250. +The third line is +another reply to the same request saying host techpit has laserwriter +"techpit" registered on port 186. + +\fBATP packet\fP formatting is demonstrated by the following example: +.RS +.nf +.sp .5 +\f(CWjssmag.209.165 > helios.132: atp-req 12266<0-7> 0xae030001 +helios.132 > jssmag.209.165: atp-resp 12266:0 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp 12266:1 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp 12266:2 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp 12266:3 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp 12266:4 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp 12266:5 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp 12266:6 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp*12266:7 (512) 0xae040000 +jssmag.209.165 > helios.132: atp-req 12266<3,5> 0xae030001 +helios.132 > jssmag.209.165: atp-resp 12266:3 (512) 0xae040000 +helios.132 > jssmag.209.165: atp-resp 12266:5 (512) 0xae040000 +jssmag.209.165 > helios.132: atp-rel 12266<0-7> 0xae030001 +jssmag.209.133 > helios.132: atp-req* 12267<0-7> 0xae030002\fR +.sp .5 +.fi +.RE +Jssmag.209 initiates transaction id 12266 with host helios by requesting +up to 8 packets (the `<0-7>'). +The hex number at the end of the line +is the value of the `userdata' field in the request. +.LP +Helios responds with 8 512-byte packets. +The `:digit' following the +transaction id gives the packet sequence number in the transaction +and the number in parens is the amount of data in the packet, +excluding the ATP header. +The `*' on packet 7 indicates that the +EOM bit was set. +.LP +Jssmag.209 then requests that packets 3 & 5 be retransmitted. +Helios +resends them then jssmag.209 releases the transaction. +Finally, +jssmag.209 initiates the next request. +The `*' on the request +indicates that XO (`exactly once') was \fInot\fP set. + +.SH BACKWARD COMPATIBILITY +The TCP flag names +.B tcp-ece +and +.B tcp-cwr +became available when linking with libpcap 1.9.0 or later. + +.SH "SEE ALSO" +.BR stty (1), +.BR pcap (3PCAP), +.BR bpf (4), +.BR nit (4P), +.BR \%pcap-savefile (@MAN_FILE_FORMATS@), +.BR \%pcap-filter (@MAN_MISC_INFO@), +.BR \%pcap-tstamp (@MAN_MISC_INFO@) +.LP +.RS +.na +.I https://www.iana.org/assignments/media-types/application/vnd.tcpdump.pcap +.ad +.RE +.LP +.SH AUTHORS +The original authors are: +.LP +Van Jacobson, +Craig Leres and +Steven McCanne, all of the +Lawrence Berkeley National Laboratory, University of California, Berkeley, CA. +.LP +It is currently maintained by The Tcpdump Group. +.LP +The current version is available via HTTPS: +.LP +.RS +.I https://www.tcpdump.org/ +.RE +.LP +The original distribution is available via anonymous ftp: +.LP +.RS +.I ftp://ftp.ee.lbl.gov/old/tcpdump.tar.Z +.RE +.LP +IPv6/IPsec support is added by WIDE/KAME project. +This program uses OpenSSL/LibreSSL, under specific configurations. +.SH BUGS +To report a security issue please send an e-mail to \%security@tcpdump.org. +.LP +To report bugs and other problems, contribute patches, request a +feature, provide generic feedback etc. please see the file +.I CONTRIBUTING.md +in the tcpdump source tree root. +.LP +NIT doesn't let you watch your own outbound traffic, BPF will. +We recommend that you use the latter. +.LP +On Linux systems with 2.0[.x] kernels: +.IP +packets on the loopback device will be seen twice; +.IP +packet filtering cannot be done in the kernel, so that all packets must +be copied from the kernel in order to be filtered in user mode; +.IP +all of a packet, not just the part that's within the snapshot length, +will be copied from the kernel (the 2.0[.x] packet capture mechanism, if +asked to copy only part of a packet to userspace, will not report the +true length of the packet; this would cause most IP packets to get an +error from +.BR tcpdump ); +.IP +capturing on some PPP devices won't work correctly. +.LP +We recommend that you upgrade to a 2.2 or later kernel. +.LP +Some attempt should be made to reassemble IP fragments or, at least +to compute the right length for the higher level protocol. +.LP +Name server inverse queries are not dumped correctly: the (empty) +question section is printed rather than real query in the answer +section. +Some believe that inverse queries are themselves a bug and +prefer to fix the program generating them rather than \fItcpdump\fP. +.LP +A packet trace that crosses a daylight savings time change will give +skewed time stamps (the time change is ignored). +.LP +Filter expressions on fields other than those in Token Ring headers will +not correctly handle source-routed Token Ring packets. +.LP +Filter expressions on fields other than those in 802.11 headers will not +correctly handle 802.11 data packets with both To DS and From DS set. +.LP +.BR "ip6 proto" +should chase header chain, but at this moment it does not. +.BR "ip6 protochain" +is supplied for this behavior. +.LP +Arithmetic expression against transport layer headers, like \fBtcp[0]\fP, +does not work against IPv6 packets. +It only looks at IPv4 packets. -- cgit v1.2.3