Adding upstream version 1:115.7.0.upstream/1%115.7.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 552 insertions, 0 deletions

diff --git a/gfx/2d/Path.cpp b/gfx/2d/Path.cpp
new file mode 100644
index 0000000000..69b5680c24
--- /dev/null
+++ b/gfx/2d/Path.cpp
@@ -0,0 +1,552 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set ts=8 sts=2 et sw=2 tw=80: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#include "2D.h"
+#include "PathAnalysis.h"
+#include "PathHelpers.h"
+
+namespace mozilla {
+namespace gfx {
+
+static double CubicRoot(double aValue) {
+  if (aValue < 0.0) {
+    return -CubicRoot(-aValue);
+  } else {
+    return pow(aValue, 1.0 / 3.0);
+  }
+}
+
+struct PointD : public BasePoint<double, PointD> {
+  typedef BasePoint<double, PointD> Super;
+
+  PointD() : Super() {}
+  PointD(double aX, double aY) : Super(aX, aY) {}
+  MOZ_IMPLICIT PointD(const Point& aPoint) : Super(aPoint.x, aPoint.y) {}
+
+  Point ToPoint() const {
+    return Point(static_cast<Float>(x), static_cast<Float>(y));
+  }
+};
+
+struct BezierControlPoints {
+  BezierControlPoints() = default;
+  BezierControlPoints(const PointD& aCP1, const PointD& aCP2,
+                      const PointD& aCP3, const PointD& aCP4)
+      : mCP1(aCP1), mCP2(aCP2), mCP3(aCP3), mCP4(aCP4) {}
+
+  PointD mCP1, mCP2, mCP3, mCP4;
+};
+
+void FlattenBezier(const BezierControlPoints& aPoints, PathSink* aSink,
+                   double aTolerance);
+
+Path::Path() = default;
+
+Path::~Path() = default;
+
+Float Path::ComputeLength() {
+  EnsureFlattenedPath();
+  return mFlattenedPath->ComputeLength();
+}
+
+Point Path::ComputePointAtLength(Float aLength, Point* aTangent) {
+  EnsureFlattenedPath();
+  return mFlattenedPath->ComputePointAtLength(aLength, aTangent);
+}
+
+void Path::EnsureFlattenedPath() {
+  if (!mFlattenedPath) {
+    mFlattenedPath = new FlattenedPath();
+    StreamToSink(mFlattenedPath);
+  }
+}
+
+// This is the maximum deviation we allow (with an additional ~20% margin of
+// error) of the approximation from the actual Bezier curve.
+const Float kFlatteningTolerance = 0.0001f;
+
+void FlattenedPath::MoveTo(const Point& aPoint) {
+  MOZ_ASSERT(!mCalculatedLength);
+  FlatPathOp op;
+  op.mType = FlatPathOp::OP_MOVETO;
+  op.mPoint = aPoint;
+  mPathOps.push_back(op);
+
+  mBeginPoint = aPoint;
+}
+
+void FlattenedPath::LineTo(const Point& aPoint) {
+  MOZ_ASSERT(!mCalculatedLength);
+  FlatPathOp op;
+  op.mType = FlatPathOp::OP_LINETO;
+  op.mPoint = aPoint;
+  mPathOps.push_back(op);
+}
+
+void FlattenedPath::BezierTo(const Point& aCP1, const Point& aCP2,
+                             const Point& aCP3) {
+  MOZ_ASSERT(!mCalculatedLength);
+  FlattenBezier(BezierControlPoints(CurrentPoint(), aCP1, aCP2, aCP3), this,
+                kFlatteningTolerance);
+}
+
+void FlattenedPath::QuadraticBezierTo(const Point& aCP1, const Point& aCP2) {
+  MOZ_ASSERT(!mCalculatedLength);
+  // We need to elevate the degree of this quadratic B�zier to cubic, so we're
+  // going to add an intermediate control point, and recompute control point 1.
+  // The first and last control points remain the same.
+  // This formula can be found on http://fontforge.sourceforge.net/bezier.html
+  Point CP0 = CurrentPoint();
+  Point CP1 = (CP0 + aCP1 * 2.0) / 3.0;
+  Point CP2 = (aCP2 + aCP1 * 2.0) / 3.0;
+  Point CP3 = aCP2;
+
+  BezierTo(CP1, CP2, CP3);
+}
+
+void FlattenedPath::Close() {
+  MOZ_ASSERT(!mCalculatedLength);
+  LineTo(mBeginPoint);
+}
+
+void FlattenedPath::Arc(const Point& aOrigin, float aRadius, float aStartAngle,
+                        float aEndAngle, bool aAntiClockwise) {
+  ArcToBezier(this, aOrigin, Size(aRadius, aRadius), aStartAngle, aEndAngle,
+              aAntiClockwise);
+}
+
+Float FlattenedPath::ComputeLength() {
+  if (!mCalculatedLength) {
+    Point currentPoint;
+
+    for (uint32_t i = 0; i < mPathOps.size(); i++) {
+      if (mPathOps[i].mType == FlatPathOp::OP_MOVETO) {
+        currentPoint = mPathOps[i].mPoint;
+      } else {
+        mCachedLength += Distance(currentPoint, mPathOps[i].mPoint);
+        currentPoint = mPathOps[i].mPoint;
+      }
+    }
+
+    mCalculatedLength = true;
+  }
+
+  return mCachedLength;
+}
+
+Point FlattenedPath::ComputePointAtLength(Float aLength, Point* aTangent) {
+  if (aLength < mCursor.mLength) {
+    // If cursor is beyond the target length, reset to the beginning.
+    mCursor.Reset();
+  } else {
+    // Adjust aLength to account for the position where we'll start searching.
+    aLength -= mCursor.mLength;
+  }
+
+  while (mCursor.mIndex < mPathOps.size()) {
+    const auto& op = mPathOps[mCursor.mIndex];
+    if (op.mType == FlatPathOp::OP_MOVETO) {
+      if (Distance(mCursor.mCurrentPoint, op.mPoint) > 0.0f) {
+        mCursor.mLastPointSinceMove = mCursor.mCurrentPoint;
+      }
+      mCursor.mCurrentPoint = op.mPoint;
+    } else {
+      Float segmentLength = Distance(mCursor.mCurrentPoint, op.mPoint);
+
+      if (segmentLength) {
+        mCursor.mLastPointSinceMove = mCursor.mCurrentPoint;
+        if (segmentLength > aLength) {
+          Point currentVector = op.mPoint - mCursor.mCurrentPoint;
+          Point tangent = currentVector / segmentLength;
+          if (aTangent) {
+            *aTangent = tangent;
+          }
+          return mCursor.mCurrentPoint + tangent * aLength;
+        }
+      }
+
+      aLength -= segmentLength;
+      mCursor.mLength += segmentLength;
+      mCursor.mCurrentPoint = op.mPoint;
+    }
+    mCursor.mIndex++;
+  }
+
+  if (aTangent) {
+    Point currentVector = mCursor.mCurrentPoint - mCursor.mLastPointSinceMove;
+    if (auto h = hypotf(currentVector.x, currentVector.y)) {
+      *aTangent = currentVector / h;
+    } else {
+      *aTangent = Point();
+    }
+  }
+  return mCursor.mCurrentPoint;
+}
+
+// This function explicitly permits aControlPoints to refer to the same object
+// as either of the other arguments.
+static void SplitBezier(const BezierControlPoints& aControlPoints,
+                        BezierControlPoints* aFirstSegmentControlPoints,
+                        BezierControlPoints* aSecondSegmentControlPoints,
+                        double t) {
+  MOZ_ASSERT(aSecondSegmentControlPoints);
+
+  *aSecondSegmentControlPoints = aControlPoints;
+
+  PointD cp1a =
+      aControlPoints.mCP1 + (aControlPoints.mCP2 - aControlPoints.mCP1) * t;
+  PointD cp2a =
+      aControlPoints.mCP2 + (aControlPoints.mCP3 - aControlPoints.mCP2) * t;
+  PointD cp1aa = cp1a + (cp2a - cp1a) * t;
+  PointD cp3a =
+      aControlPoints.mCP3 + (aControlPoints.mCP4 - aControlPoints.mCP3) * t;
+  PointD cp2aa = cp2a + (cp3a - cp2a) * t;
+  PointD cp1aaa = cp1aa + (cp2aa - cp1aa) * t;
+  aSecondSegmentControlPoints->mCP4 = aControlPoints.mCP4;
+
+  if (aFirstSegmentControlPoints) {
+    aFirstSegmentControlPoints->mCP1 = aControlPoints.mCP1;
+    aFirstSegmentControlPoints->mCP2 = cp1a;
+    aFirstSegmentControlPoints->mCP3 = cp1aa;
+    aFirstSegmentControlPoints->mCP4 = cp1aaa;
+  }
+  aSecondSegmentControlPoints->mCP1 = cp1aaa;
+  aSecondSegmentControlPoints->mCP2 = cp2aa;
+  aSecondSegmentControlPoints->mCP3 = cp3a;
+}
+
+static void FlattenBezierCurveSegment(const BezierControlPoints& aControlPoints,
+                                      PathSink* aSink, double aTolerance) {
+  /* The algorithm implemented here is based on:
+   * http://cis.usouthal.edu/~hain/general/Publications/Bezier/Bezier%20Offset%20Curves.pdf
+   *
+   * The basic premise is that for a small t the third order term in the
+   * equation of a cubic bezier curve is insignificantly small. This can
+   * then be approximated by a quadratic equation for which the maximum
+   * difference from a linear approximation can be much more easily determined.
+   */
+  BezierControlPoints currentCP = aControlPoints;
+
+  double t = 0;
+  double currentTolerance = aTolerance;
+  while (t < 1.0) {
+    PointD cp21 = currentCP.mCP2 - currentCP.mCP1;
+    PointD cp31 = currentCP.mCP3 - currentCP.mCP1;
+
+    /* To remove divisions and check for divide-by-zero, this is optimized from:
+     * Float s3 = (cp31.x * cp21.y - cp31.y * cp21.x) / hypotf(cp21.x, cp21.y);
+     * t = 2 * Float(sqrt(aTolerance / (3. * std::abs(s3))));
+     */
+    double cp21x31 = cp31.x * cp21.y - cp31.y * cp21.x;
+    double h = hypot(cp21.x, cp21.y);
+    if (cp21x31 * h == 0) {
+      break;
+    }
+
+    double s3inv = h / cp21x31;
+    t = 2 * sqrt(currentTolerance * std::abs(s3inv) / 3.);
+    currentTolerance *= 1 + aTolerance;
+    // Increase tolerance every iteration to prevent this loop from executing
+    // too many times. This approximates the length of large curves more
+    // roughly. In practice, aTolerance is the constant kFlatteningTolerance
+    // which has value 0.0001. With this value, it takes 6,932 splits to double
+    // currentTolerance (to 0.0002) and 23,028 splits to increase
+    // currentTolerance by an order of magnitude (to 0.001).
+    if (t >= 1.0) {
+      break;
+    }
+
+    SplitBezier(currentCP, nullptr, &currentCP, t);
+
+    aSink->LineTo(currentCP.mCP1.ToPoint());
+  }
+
+  aSink->LineTo(currentCP.mCP4.ToPoint());
+}
+
+static inline void FindInflectionApproximationRange(
+    BezierControlPoints aControlPoints, double* aMin, double* aMax, double aT,
+    double aTolerance) {
+  SplitBezier(aControlPoints, nullptr, &aControlPoints, aT);
+
+  PointD cp21 = aControlPoints.mCP2 - aControlPoints.mCP1;
+  PointD cp41 = aControlPoints.mCP4 - aControlPoints.mCP1;
+
+  if (cp21.x == 0. && cp21.y == 0.) {
+    cp21 = aControlPoints.mCP3 - aControlPoints.mCP1;
+  }
+
+  if (cp21.x == 0. && cp21.y == 0.) {
+    // In this case s3 becomes lim[n->0] (cp41.x * n) / n - (cp41.y * n) / n =
+    // cp41.x - cp41.y.
+    double s3 = cp41.x - cp41.y;
+
+    // Use the absolute value so that Min and Max will correspond with the
+    // minimum and maximum of the range.
+    if (s3 == 0) {
+      *aMin = -1.0;
+      *aMax = 2.0;
+    } else {
+      double r = CubicRoot(std::abs(aTolerance / s3));
+      *aMin = aT - r;
+      *aMax = aT + r;
+    }
+    return;
+  }
+
+  double s3 = (cp41.x * cp21.y - cp41.y * cp21.x) / hypot(cp21.x, cp21.y);
+
+  if (s3 == 0) {
+    // This means within the precision we have it can be approximated
+    // infinitely by a linear segment. Deal with this by specifying the
+    // approximation range as extending beyond the entire curve.
+    *aMin = -1.0;
+    *aMax = 2.0;
+    return;
+  }
+
+  double tf = CubicRoot(std::abs(aTolerance / s3));
+
+  *aMin = aT - tf * (1 - aT);
+  *aMax = aT + tf * (1 - aT);
+}
+
+/* Find the inflection points of a bezier curve. Will return false if the
+ * curve is degenerate in such a way that it is best approximated by a straight
+ * line.
+ *
+ * The below algorithm was written by Jeff Muizelaar <jmuizelaar@mozilla.com>,
+ * explanation follows:
+ *
+ * The lower inflection point is returned in aT1, the higher one in aT2. In the
+ * case of a single inflection point this will be in aT1.
+ *
+ * The method is inspired by the algorithm in "analysis of in?ection points for
+ * planar cubic bezier curve"
+ *
+ * Here are some differences between this algorithm and versions discussed
+ * elsewhere in the literature:
+ *
+ * zhang et. al compute a0, d0 and e0 incrementally using the follow formula:
+ *
+ * Point a0 = CP2 - CP1
+ * Point a1 = CP3 - CP2
+ * Point a2 = CP4 - CP1
+ *
+ * Point d0 = a1 - a0
+ * Point d1 = a2 - a1
+
+ * Point e0 = d1 - d0
+ *
+ * this avoids any multiplications and may or may not be faster than the
+ * approach take below.
+ *
+ * "fast, precise flattening of cubic bezier path and ofset curves" by hain et.
+ * al
+ * Point a = CP1 + 3 * CP2 - 3 * CP3 + CP4
+ * Point b = 3 * CP1 - 6 * CP2 + 3 * CP3
+ * Point c = -3 * CP1 + 3 * CP2
+ * Point d = CP1
+ * the a, b, c, d can be expressed in terms of a0, d0 and e0 defined above as:
+ * c = 3 * a0
+ * b = 3 * d0
+ * a = e0
+ *
+ *
+ * a = 3a = a.y * b.x - a.x * b.y
+ * b = 3b = a.y * c.x - a.x * c.y
+ * c = 9c = b.y * c.x - b.x * c.y
+ *
+ * The additional multiples of 3 cancel each other out as show below:
+ *
+ * x = (-b + sqrt(b * b - 4 * a * c)) / (2 * a)
+ * x = (-3 * b + sqrt(3 * b * 3 * b - 4 * a * 3 * 9 * c / 3)) / (2 * 3 * a)
+ * x = 3 * (-b + sqrt(b * b - 4 * a * c)) / (2 * 3 * a)
+ * x = (-b + sqrt(b * b - 4 * a * c)) / (2 * a)
+ *
+ * I haven't looked into whether the formulation of the quadratic formula in
+ * hain has any numerical advantages over the one used below.
+ */
+static inline void FindInflectionPoints(
+    const BezierControlPoints& aControlPoints, double* aT1, double* aT2,
+    uint32_t* aCount) {
+  // Find inflection points.
+  // See www.faculty.idc.ac.il/arik/quality/appendixa.html for an explanation
+  // of this approach.
+  PointD A = aControlPoints.mCP2 - aControlPoints.mCP1;
+  PointD B =
+      aControlPoints.mCP3 - (aControlPoints.mCP2 * 2) + aControlPoints.mCP1;
+  PointD C = aControlPoints.mCP4 - (aControlPoints.mCP3 * 3) +
+             (aControlPoints.mCP2 * 3) - aControlPoints.mCP1;
+
+  double a = B.x * C.y - B.y * C.x;
+  double b = A.x * C.y - A.y * C.x;
+  double c = A.x * B.y - A.y * B.x;
+
+  if (a == 0) {
+    // Not a quadratic equation.
+    if (b == 0) {
+      // Instead of a linear acceleration change we have a constant
+      // acceleration change. This means the equation has no solution
+      // and there are no inflection points, unless the constant is 0.
+      // In that case the curve is a straight line, essentially that means
+      // the easiest way to deal with is is by saying there's an inflection
+      // point at t == 0. The inflection point approximation range found will
+      // automatically extend into infinity.
+      if (c == 0) {
+        *aCount = 1;
+        *aT1 = 0;
+        return;
+      }
+      *aCount = 0;
+      return;
+    }
+    *aT1 = -c / b;
+    *aCount = 1;
+    return;
+  }
+
+  double discriminant = b * b - 4 * a * c;
+
+  if (discriminant < 0) {
+    // No inflection points.
+    *aCount = 0;
+  } else if (discriminant == 0) {
+    *aCount = 1;
+    *aT1 = -b / (2 * a);
+  } else {
+    /* Use the following formula for computing the roots:
+     *
+     * q = -1/2 * (b + sign(b) * sqrt(b^2 - 4ac))
+     * t1 = q / a
+     * t2 = c / q
+     */
+    double q = sqrt(discriminant);
+    if (b < 0) {
+      q = b - q;
+    } else {
+      q = b + q;
+    }
+    q *= -1. / 2;
+
+    *aT1 = q / a;
+    *aT2 = c / q;
+    if (*aT1 > *aT2) {
+      std::swap(*aT1, *aT2);
+    }
+    *aCount = 2;
+  }
+}
+
+void FlattenBezier(const BezierControlPoints& aControlPoints, PathSink* aSink,
+                   double aTolerance) {
+  double t1;
+  double t2;
+  uint32_t count;
+
+  FindInflectionPoints(aControlPoints, &t1, &t2, &count);
+
+  // Check that at least one of the inflection points is inside [0..1]
+  if (count == 0 ||
+      ((t1 < 0.0 || t1 >= 1.0) && (count == 1 || (t2 < 0.0 || t2 >= 1.0)))) {
+    FlattenBezierCurveSegment(aControlPoints, aSink, aTolerance);
+    return;
+  }
+
+  double t1min = t1, t1max = t1, t2min = t2, t2max = t2;
+
+  BezierControlPoints remainingCP = aControlPoints;
+
+  // For both inflection points, calulate the range where they can be linearly
+  // approximated if they are positioned within [0,1]
+  if (count > 0 && t1 >= 0 && t1 < 1.0) {
+    FindInflectionApproximationRange(aControlPoints, &t1min, &t1max, t1,
+                                     aTolerance);
+  }
+  if (count > 1 && t2 >= 0 && t2 < 1.0) {
+    FindInflectionApproximationRange(aControlPoints, &t2min, &t2max, t2,
+                                     aTolerance);
+  }
+  BezierControlPoints nextCPs = aControlPoints;
+  BezierControlPoints prevCPs;
+
+  // Process ranges. [t1min, t1max] and [t2min, t2max] are approximated by line
+  // segments.
+  if (count == 1 && t1min <= 0 && t1max >= 1.0) {
+    // The whole range can be approximated by a line segment.
+    aSink->LineTo(aControlPoints.mCP4.ToPoint());
+    return;
+  }
+
+  if (t1min > 0) {
+    // Flatten the Bezier up until the first inflection point's approximation
+    // point.
+    SplitBezier(aControlPoints, &prevCPs, &remainingCP, t1min);
+    FlattenBezierCurveSegment(prevCPs, aSink, aTolerance);
+  }
+  if (t1max >= 0 && t1max < 1.0 && (count == 1 || t2min > t1max)) {
+    // The second inflection point's approximation range begins after the end
+    // of the first, approximate the first inflection point by a line and
+    // subsequently flatten up until the end or the next inflection point.
+    SplitBezier(aControlPoints, nullptr, &nextCPs, t1max);
+
+    aSink->LineTo(nextCPs.mCP1.ToPoint());
+
+    if (count == 1 || (count > 1 && t2min >= 1.0)) {
+      // No more inflection points to deal with, flatten the rest of the curve.
+      FlattenBezierCurveSegment(nextCPs, aSink, aTolerance);
+    }
+  } else if (count > 1 && t2min > 1.0) {
+    // We've already concluded t2min <= t1max, so if this is true the
+    // approximation range for the first inflection point runs past the
+    // end of the curve, draw a line to the end and we're done.
+    aSink->LineTo(aControlPoints.mCP4.ToPoint());
+    return;
+  }
+
+  if (count > 1 && t2min < 1.0 && t2max > 0) {
+    if (t2min > 0 && t2min < t1max) {
+      // In this case the t2 approximation range starts inside the t1
+      // approximation range.
+      SplitBezier(aControlPoints, nullptr, &nextCPs, t1max);
+      aSink->LineTo(nextCPs.mCP1.ToPoint());
+    } else if (t2min > 0 && t1max > 0) {
+      SplitBezier(aControlPoints, nullptr, &nextCPs, t1max);
+
+      // Find a control points describing the portion of the curve between t1max
+      // and t2min.
+      double t2mina = (t2min - t1max) / (1 - t1max);
+      SplitBezier(nextCPs, &prevCPs, &nextCPs, t2mina);
+      FlattenBezierCurveSegment(prevCPs, aSink, aTolerance);
+    } else if (t2min > 0) {
+      // We have nothing interesting before t2min, find that bit and flatten it.
+      SplitBezier(aControlPoints, &prevCPs, &nextCPs, t2min);
+      FlattenBezierCurveSegment(prevCPs, aSink, aTolerance);
+    }
+    if (t2max < 1.0) {
+      // Flatten the portion of the curve after t2max
+      SplitBezier(aControlPoints, nullptr, &nextCPs, t2max);
+
+      // Draw a line to the start, this is the approximation between t2min and
+      // t2max.
+      aSink->LineTo(nextCPs.mCP1.ToPoint());
+      FlattenBezierCurveSegment(nextCPs, aSink, aTolerance);
+    } else {
+      // Our approximation range extends beyond the end of the curve.
+      aSink->LineTo(aControlPoints.mCP4.ToPoint());
+      return;
+    }
+  }
+}
+
+Rect Path::GetFastBounds(const Matrix& aTransform,
+                         const StrokeOptions* aStrokeOptions) const {
+  return aStrokeOptions ? GetStrokedBounds(*aStrokeOptions, aTransform)
+                        : GetBounds(aTransform);
+}
+
+}  // namespace gfx
+}  // namespace mozilla