From 029f72b1a93430b24b88eb3a72c6114d9f149737 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Wed, 10 Apr 2024 22:09:20 +0200
Subject: Adding upstream version 2:9.1.0016.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 src/testdir/test_memory_usage.vim | 165 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)
 create mode 100644 src/testdir/test_memory_usage.vim

(limited to 'src/testdir/test_memory_usage.vim')

diff --git a/src/testdir/test_memory_usage.vim b/src/testdir/test_memory_usage.vim
new file mode 100644
index 0000000..13e7eec
--- /dev/null
+++ b/src/testdir/test_memory_usage.vim
@@ -0,0 +1,165 @@
+" Tests for memory usage.
+
+source check.vim
+CheckFeature terminal
+CheckNotGui
+
+" Skip tests on Travis CI ASAN build because it's difficult to estimate memory
+" usage.
+CheckNotAsan
+
+source shared.vim
+
+func s:pick_nr(str) abort
+  return substitute(a:str, '[^0-9]', '', 'g') * 1
+endfunc
+
+if has('win32')
+  if !executable('wmic')
+    throw 'Skipped: wmic program missing'
+  endif
+  func s:memory_usage(pid) abort
+    let cmd = printf('wmic process where processid=%d get WorkingSetSize', a:pid)
+    return s:pick_nr(system(cmd)) / 1024
+  endfunc
+elseif has('unix')
+  if !executable('ps')
+    throw 'Skipped: ps program missing'
+  endif
+  func s:memory_usage(pid) abort
+    return s:pick_nr(system('ps -o rss= -p ' . a:pid))
+  endfunc
+else
+  throw 'Skipped: not win32 or unix'
+endif
+
+" Wait for memory usage to level off.
+func s:monitor_memory_usage(pid) abort
+  let proc = {}
+  let proc.pid = a:pid
+  let proc.hist = []
+  let proc.max = 0
+
+  func proc.op() abort
+    " Check the last 200ms.
+    let val = s:memory_usage(self.pid)
+    if self.max < val
+      let self.max = val
+    endif
+    call add(self.hist, val)
+    if len(self.hist) < 20
+      return 0
+    endif
+    let sample = remove(self.hist, 0)
+    return len(uniq([sample] + self.hist)) == 1
+  endfunc
+
+  call WaitFor({-> proc.op()}, 10000)
+  return {'last': get(proc.hist, -1), 'max': proc.max}
+endfunc
+
+let s:term_vim = {}
+
+func s:term_vim.start(...) abort
+  let self.buf = term_start([GetVimProg()] + a:000)
+  let self.job = term_getjob(self.buf)
+  call WaitFor({-> job_status(self.job) ==# 'run'})
+  let self.pid = job_info(self.job).process
+
+  " running an external command may fail once in a while
+  let g:test_is_flaky = 1
+endfunc
+
+func s:term_vim.stop() abort
+  call term_sendkeys(self.buf, ":qall!\<CR>")
+  call WaitFor({-> job_status(self.job) ==# 'dead'})
+  exe self.buf . 'bwipe!'
+endfunc
+
+func s:vim_new() abort
+  return copy(s:term_vim)
+endfunc
+
+func Test_memory_func_capture_vargs()
+  " Case: if a local variable captures a:000, funccall object will be free
+  " just after it finishes.
+  let testfile = 'Xtest.vim'
+  let lines =<< trim END
+        func s:f(...)
+          let x = a:000
+        endfunc
+        for _ in range(10000)
+          call s:f(0)
+        endfor
+  END
+  call writefile(lines, testfile, 'D')
+
+  let vim = s:vim_new()
+  call vim.start('--clean', '-c', 'set noswapfile', testfile)
+  let before = s:monitor_memory_usage(vim.pid).last
+
+  call term_sendkeys(vim.buf, ":so %\<CR>")
+  call WaitFor({-> term_getcursor(vim.buf)[0] == 1})
+  let after = s:monitor_memory_usage(vim.pid)
+
+  " Estimate the limit of max usage as 2x initial usage.
+  " The lower limit can fluctuate a bit, use 97%.
+  call assert_inrange(before * 97 / 100, 2 * before, after.max)
+
+  " In this case, garbage collecting is not needed.
+  " The value might fluctuate a bit, allow for 3% tolerance below and 5% above.
+  " Based on various test runs.
+  let lower = after.last * 97 / 100
+  let upper = after.last * 105 / 100
+  call assert_inrange(lower, upper, after.max)
+
+  call vim.stop()
+endfunc
+
+func Test_memory_func_capture_lvars()
+  " Case: if a local variable captures l: dict, funccall object will not be
+  " free until garbage collector runs, but after that memory usage doesn't
+  " increase so much even when rerun Xtest.vim since system memory caches.
+  let testfile = 'Xtest.vim'
+  let lines =<< trim END
+        func s:f()
+          let x = l:
+        endfunc
+        for _ in range(10000)
+          call s:f()
+        endfor
+  END
+  call writefile(lines, testfile, 'D')
+
+  let vim = s:vim_new()
+  call vim.start('--clean', '-c', 'set noswapfile', testfile)
+  let before = s:monitor_memory_usage(vim.pid).last
+
+  call term_sendkeys(vim.buf, ":so %\<CR>")
+  call WaitFor({-> term_getcursor(vim.buf)[0] == 1})
+  let after = s:monitor_memory_usage(vim.pid)
+
+  " Rerun Xtest.vim.
+  for _ in range(3)
+    call term_sendkeys(vim.buf, ":so %\<CR>")
+    call WaitFor({-> term_getcursor(vim.buf)[0] == 1})
+    let last = s:monitor_memory_usage(vim.pid).last
+  endfor
+
+  " The usage may be a bit less than the last value, use 80%.
+  " Allow for 20% tolerance at the upper limit.  That's very permissive, but
+  " otherwise the test fails sometimes.  On Cirrus CI with FreeBSD we need to
+  " be even much more permissive.
+  if has('bsd')
+    let multiplier = 19
+  else
+    let multiplier = 12
+  endif
+  let lower = before * 8 / 10
+  let upper = (after.max + (after.last - before)) * multiplier / 10
+  call assert_inrange(lower, upper, last)
+
+  call vim.stop()
+endfunc
+
+" vim: shiftwidth=2 sts=2 expandtab
-- 
cgit v1.2.3