Adding upstream version 7.0.14-dfsg.upstream/7.0.14-dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 133 insertions, 0 deletions

diff --git a/src/VBox/Devices/EFI/Firmware/NetworkPkg/NetworkDefines.dsc.inc b/src/VBox/Devices/EFI/Firmware/NetworkPkg/NetworkDefines.dsc.inc
new file mode 100644
index 00000000..ac5c8e92
--- /dev/null
+++ b/src/VBox/Devices/EFI/Firmware/NetworkPkg/NetworkDefines.dsc.inc
@@ -0,0 +1,133 @@
+## @file
+# Network DSC include file for [Defines] section of all Architectures.
+#
+# This file can be included to the [Defines] section of a platform DSC file by
+# using "!include NetworkPkg/NetworkDefines.dsc.inc" to set default value of
+# flags if they are not defined somewhere else, and also check the value to see
+# if there is any conflict.
+#
+# These flags can be defined before the !include line, or changed on the command
+# line to enable or disable related feature support.
+#   -D FLAG=VALUE
+# The default value of these flags are:
+#   DEFINE NETWORK_ENABLE                 = TRUE
+#   DEFINE NETWORK_SNP_ENABLE             = TRUE
+#   DEFINE NETWORK_IP4_ENABLE             = TRUE
+#   DEFINE NETWORK_IP6_ENABLE             = TRUE
+#   DEFINE NETWORK_TLS_ENABLE             = TRUE
+#   DEFINE NETWORK_HTTP_ENABLE            = FALSE
+#   DEFINE NETWORK_HTTP_BOOT_ENABLE       = TRUE
+#   DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
+#   DEFINE NETWORK_ISCSI_ENABLE           = FALSE
+#   DEFINE NETWORK_VLAN_ENABLE            = TRUE
+#
+# Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+# (C) Copyright 2020 Hewlett Packard Enterprise Development LP<BR>
+#
+#    SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+!ifndef NETWORK_ENABLE
+  #
+  # This flag is to enable or disable the whole network stack.
+  #
+  DEFINE NETWORK_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_SNP_ENABLE
+  #
+  # This flag is to include the common SNP driver or not.
+  #
+  DEFINE NETWORK_SNP_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_VLAN_ENABLE
+  #
+  # This flag is to enable or disable VLAN feature.
+  #
+  DEFINE NETWORK_VLAN_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_IP4_ENABLE
+  #
+  # This flag is to enable or disable IPv4 network stack.
+  #
+  DEFINE NETWORK_IP4_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_IP6_ENABLE
+  #
+  # This flag is to enable or disable IPv6 network stack.
+  #
+  DEFINE NETWORK_IP6_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_TLS_ENABLE
+  #
+  # This flag is to enable or disable TLS feature.
+  #
+  # Note: This feature depends on the OpenSSL building. To enable this feature, please
+  #       follow the instructions found in the file "OpenSSL-HOWTO.txt" located in
+  #       CryptoPkg\Library\OpensslLib to enable the OpenSSL building first.
+  #       The OpensslLib.inf library instance should be used since libssl is required.
+  #
+  DEFINE NETWORK_TLS_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_HTTP_ENABLE
+  #
+  # This flag is to enable or disable HTTP(S) feature.
+  # The default is set to FALSE to not affecting the existing
+  # platforms.
+  # NETWORK_HTTP_ENABLE set to FALSE is not affecting NETWORK_HTTP_BOOT_ENABLE
+  # when NETWORK_HTTP_BOOT_ENABLE is TRUE.
+  DEFINE NETWORK_HTTP_ENABLE = FALSE
+!endif
+
+!ifndef NETWORK_HTTP_BOOT_ENABLE
+  #
+  # This flag is to enable or disable HTTP(S) boot feature.
+  #
+  #
+  DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_ALLOW_HTTP_CONNECTIONS
+  #
+  # Indicates whether HTTP connections (i.e., unsecured) are permitted or not.
+  #
+  # Note: If NETWORK_ALLOW_HTTP_CONNECTIONS is TRUE, HTTP connections are allowed.
+  #       Both the "https://" and "http://" URI schemes are permitted. Otherwise, HTTP
+  #       connections are denied. Only the "https://" URI scheme is permitted.
+  #
+  DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
+!endif
+
+!ifndef NETWORK_ISCSI_ENABLE
+  #
+  # This flag is to enable or disable iSCSI feature.
+  #
+  # Note: This feature depends on the OpenSSL building. To enable this feature, please
+  #       follow the instructions found in the file "OpenSSL-HOWTO.txt" located in
+  #       CryptoPkg\Library\OpensslLib to enable the OpenSSL building first.
+  #       Both OpensslLib.inf and OpensslLibCrypto.inf library instance can be used
+  #       since libssl is not required for iSCSI.
+  #
+  DEFINE NETWORK_ISCSI_ENABLE = FALSE
+!endif
+
+!if $(NETWORK_ENABLE) == TRUE
+  #
+  # Check the flags to see if there is any conflict.
+  #
+  !if ($(NETWORK_IP4_ENABLE) == FALSE) AND ($(NETWORK_IP6_ENABLE) == FALSE)
+    !error "Must enable at least IP4 or IP6 stack if NETWORK_ENABLE is set to TRUE!"
+  !endif
+
+  !if ($(NETWORK_HTTP_BOOT_ENABLE) == TRUE) OR ($(NETWORK_HTTP_ENABLE) == TRUE)
+    !if ($(NETWORK_TLS_ENABLE) == FALSE) AND ($(NETWORK_ALLOW_HTTP_CONNECTIONS) == FALSE)
+      !error "Must enable TLS to support HTTPS, or allow unsecured HTTP connection, if NETWORK_HTTP_BOOT_ENABLE or NETWORK_HTTP_ENABLE is set to TRUE!"
+    !endif
+  !endif
+!endif