Adding upstream version 7.0.14-dfsg.upstream/7.0.14-dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 27 insertions, 0 deletions

diff --git a/src/VBox/ValidationKit/vms/t-nt310.txt b/src/VBox/ValidationKit/vms/t-nt310.txt
new file mode 100644
index 00000000..32db4621
--- /dev/null
+++ b/src/VBox/ValidationKit/vms/t-nt310.txt
@@ -0,0 +1,27 @@
+
+Test VM - t-nt310 - Windows NT 3.1 no service pack
+==================================================
+
+Setup:
+ - Configure a VM t-nt310 with using the Windows NT 3.x settings, but with only
+   64 MiB RAM (can't detect more) and 512 MiB disk (2GiB fails NTFS conversion).
+ - Enable COM1.
+ - Make sure networking is NAT and PCNET.
+ - Make sure you're using BusLogic for both HD and DVD-ROM.
+ - Enable DNS proxying:
+        VBoxManage modifyvm t-nt310 --natdnsproxy1 on.
+ - Optionally set 486 as the CPU profile (may avoid install problems):
+        VBoxManage modifyvm t-nt310 --cpu-profile "Intel 80486"
+ - Install the OS.
+        - PCNet are not included on install media, so get them of the
+          net and install via floppy when it fails to detect NICs.
+        - Use 'password' as Administrator password.
+ - Open the system settings and add an environment variable "SystemDrive" with the
+   value "C:" (NT 3.50 and later sets this automagically).
+ - While in the system settings, reduce the boot wait to 1 second.
+ - Open the network settings and add the TCPIP protocol.  Configure it with IP
+   10.0.2.15/24, gateway 10.0.2.2, and DNS 10.0.2.3 (via "Connections..." button).
+ - Reboot and check that you can ping stuff.
+ - Insert the ValidationKit ISO and install the test execution service, see
+   vboxtxs-readme.txt for details. Needs the NT 3.x bits.
+ - Proceed as shown in readme_first.txt