diff options
Diffstat (limited to 'src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol')
6 files changed, 3129 insertions, 0 deletions
diff --git a/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/DevicePath.h b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/DevicePath.h new file mode 100644 index 00000000..644499b6 --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/DevicePath.h @@ -0,0 +1,1404 @@ +/** @file + The device path protocol as defined in UEFI 2.0. + + The device path represents a programmatic path to a device, + from a software point of view. The path must persist from boot to boot, so + it can not contain things like PCI bus numbers that change from boot to boot. + +Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR> +SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __EFI_DEVICE_PATH_H__ +#define __EFI_DEVICE_PATH_H__ + +#include <Guid/PcAnsi.h> +#include <IndustryStandard/Acpi3_0.h> +#include <IndustryStandard/Bluetooth.h> + +/// +/// Device Path protocol. +/// +#define EFI_DEVICE_PATH_PROTOCOL_GUID \ + { \ + 0x9576e91, 0x6d3f, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \ + } + +/// +/// Device Path guid definition for backward-compatible with EFI1.1. +/// +#define DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH_PROTOCOL_GUID + +#pragma pack(1) + +#if defined(_MSC_EXTENSIONS) +// +// Disable warning when last field of data structure is a zero sized array. +// +#pragma warning ( disable : 4200 ) +#endif + +/** + This protocol can be used on any device handle to obtain generic path/location + information concerning the physical device or logical device. If the handle does + not logically map to a physical device, the handle may not necessarily support + the device path protocol. The device path describes the location of the device + the handle is for. The size of the Device Path can be determined from the structures + that make up the Device Path. +**/ +typedef struct { + UINT8 Type; ///< 0x01 Hardware Device Path. + ///< 0x02 ACPI Device Path. + ///< 0x03 Messaging Device Path. + ///< 0x04 Media Device Path. + ///< 0x05 BIOS Boot Specification Device Path. + ///< 0x7F End of Hardware Device Path. + + UINT8 SubType; ///< Varies by Type + ///< 0xFF End Entire Device Path, or + ///< 0x01 End This Instance of a Device Path and start a new + ///< Device Path. + + UINT8 Length[2]; ///< Specific Device Path data. Type and Sub-Type define + ///< type of data. Size of data is included in Length. + +} EFI_DEVICE_PATH_PROTOCOL; + +/// +/// Device Path protocol definition for backward-compatible with EFI1.1. +/// +typedef EFI_DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH; + +/// +/// Hardware Device Paths. +/// +#define HARDWARE_DEVICE_PATH 0x01 + +/// +/// PCI Device Path SubType. +/// +#define HW_PCI_DP 0x01 + +/// +/// PCI Device Path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// PCI Function Number. + /// + UINT8 Function; + /// + /// PCI Device Number. + /// + UINT8 Device; +} PCI_DEVICE_PATH; + +/// +/// PCCARD Device Path SubType. +/// +#define HW_PCCARD_DP 0x02 + +/// +/// PCCARD Device Path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Function Number (0 = First Function). + /// + UINT8 FunctionNumber; +} PCCARD_DEVICE_PATH; + +/// +/// Memory Mapped Device Path SubType. +/// +#define HW_MEMMAP_DP 0x03 + +/// +/// Memory Mapped Device Path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// EFI_MEMORY_TYPE + /// + UINT32 MemoryType; + /// + /// Starting Memory Address. + /// + EFI_PHYSICAL_ADDRESS StartingAddress; + /// + /// Ending Memory Address. + /// + EFI_PHYSICAL_ADDRESS EndingAddress; +} MEMMAP_DEVICE_PATH; + +/// +/// Hardware Vendor Device Path SubType. +/// +#define HW_VENDOR_DP 0x04 + +/// +/// The Vendor Device Path allows the creation of vendor-defined Device Paths. A vendor must +/// allocate a Vendor GUID for a Device Path. The Vendor GUID can then be used to define the +/// contents on the n bytes that follow in the Vendor Device Path node. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Vendor-assigned GUID that defines the data that follows. + /// + EFI_GUID Guid; + /// + /// Vendor-defined variable size data. + /// +} VENDOR_DEVICE_PATH; + +/// +/// Controller Device Path SubType. +/// +#define HW_CONTROLLER_DP 0x05 + +/// +/// Controller Device Path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Controller number. + /// + UINT32 ControllerNumber; +} CONTROLLER_DEVICE_PATH; + +/// +/// BMC Device Path SubType. +/// +#define HW_BMC_DP 0x06 + +/// +/// BMC Device Path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Interface Type. + /// + UINT8 InterfaceType; + /// + /// Base Address. + /// + UINT8 BaseAddress[8]; +} BMC_DEVICE_PATH; + +/// +/// ACPI Device Paths. +/// +#define ACPI_DEVICE_PATH 0x02 + +/// +/// ACPI Device Path SubType. +/// +#define ACPI_DP 0x01 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Device's PnP hardware ID stored in a numeric 32-bit + /// compressed EISA-type ID. This value must match the + /// corresponding _HID in the ACPI name space. + /// + UINT32 HID; + /// + /// Unique ID that is required by ACPI if two devices have the + /// same _HID. This value must also match the corresponding + /// _UID/_HID pair in the ACPI name space. Only the 32-bit + /// numeric value type of _UID is supported. Thus, strings must + /// not be used for the _UID in the ACPI name space. + /// + UINT32 UID; +} ACPI_HID_DEVICE_PATH; + +/// +/// Expanded ACPI Device Path SubType. +/// +#define ACPI_EXTENDED_DP 0x02 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Device's PnP hardware ID stored in a numeric 32-bit + /// compressed EISA-type ID. This value must match the + /// corresponding _HID in the ACPI name space. + /// + UINT32 HID; + /// + /// Unique ID that is required by ACPI if two devices have the + /// same _HID. This value must also match the corresponding + /// _UID/_HID pair in the ACPI name space. + /// + UINT32 UID; + /// + /// Device's compatible PnP hardware ID stored in a numeric + /// 32-bit compressed EISA-type ID. This value must match at + /// least one of the compatible device IDs returned by the + /// corresponding _CID in the ACPI name space. + /// + UINT32 CID; + /// + /// Optional variable length _HIDSTR. + /// Optional variable length _UIDSTR. + /// Optional variable length _CIDSTR. + /// +} ACPI_EXTENDED_HID_DEVICE_PATH; + +// +// EISA ID Macro +// EISA ID Definition 32-bits +// bits[15:0] - three character compressed ASCII EISA ID. +// bits[31:16] - binary number +// Compressed ASCII is 5 bits per character 0b00001 = 'A' 0b11010 = 'Z' +// +#define PNP_EISA_ID_CONST 0x41d0 +#define EISA_ID(_Name, _Num) ((UINT32)((_Name) | (_Num) << 16)) +#define EISA_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId))) +#define EFI_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId))) + +#define PNP_EISA_ID_MASK 0xffff +#define EISA_ID_TO_NUM(_Id) ((_Id) >> 16) + +/// +/// ACPI _ADR Device Path SubType. +/// +#define ACPI_ADR_DP 0x03 + +/// +/// The _ADR device path is used to contain video output device attributes to support the Graphics +/// Output Protocol. The device path can contain multiple _ADR entries if multiple video output +/// devices are displaying the same output. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// _ADR value. For video output devices the value of this + /// field comes from Table B-2 of the ACPI 3.0 specification. At + /// least one _ADR value is required. + /// + UINT32 ADR; + // + // This device path may optionally contain more than one _ADR entry. + // +} ACPI_ADR_DEVICE_PATH; + +#define ACPI_ADR_DISPLAY_TYPE_OTHER 0 +#define ACPI_ADR_DISPLAY_TYPE_VGA 1 +#define ACPI_ADR_DISPLAY_TYPE_TV 2 +#define ACPI_ADR_DISPLAY_TYPE_EXTERNAL_DIGITAL 3 +#define ACPI_ADR_DISPLAY_TYPE_INTERNAL_DIGITAL 4 + +#define ACPI_DISPLAY_ADR(_DeviceIdScheme, _HeadId, _NonVgaOutput, _BiosCanDetect, _VendorInfo, _Type, _Port, _Index) \ + ((UINT32)( ((UINT32)((_DeviceIdScheme) & 0x1) << 31) | \ + (((_HeadId) & 0x7) << 18) | \ + (((_NonVgaOutput) & 0x1) << 17) | \ + (((_BiosCanDetect) & 0x1) << 16) | \ + (((_VendorInfo) & 0xf) << 12) | \ + (((_Type) & 0xf) << 8) | \ + (((_Port) & 0xf) << 4) | \ + ((_Index) & 0xf) )) + +/// +/// Messaging Device Paths. +/// This Device Path is used to describe the connection of devices outside the resource domain of the +/// system. This Device Path can describe physical messaging information like SCSI ID, or abstract +/// information like networking protocol IP addresses. +/// +#define MESSAGING_DEVICE_PATH 0x03 + +/// +/// ATAPI Device Path SubType +/// +#define MSG_ATAPI_DP 0x01 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Set to zero for primary, or one for secondary. + /// + UINT8 PrimarySecondary; + /// + /// Set to zero for master, or one for slave mode. + /// + UINT8 SlaveMaster; + /// + /// Logical Unit Number. + /// + UINT16 Lun; +} ATAPI_DEVICE_PATH; + +/// +/// SCSI Device Path SubType. +/// +#define MSG_SCSI_DP 0x02 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Target ID on the SCSI bus (PUN). + /// + UINT16 Pun; + /// + /// Logical Unit Number (LUN). + /// + UINT16 Lun; +} SCSI_DEVICE_PATH; + +/// +/// Fibre Channel SubType. +/// +#define MSG_FIBRECHANNEL_DP 0x03 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Reserved for the future. + /// + UINT32 Reserved; + /// + /// Fibre Channel World Wide Number. + /// + UINT64 WWN; + /// + /// Fibre Channel Logical Unit Number. + /// + UINT64 Lun; +} FIBRECHANNEL_DEVICE_PATH; + +/// +/// Fibre Channel Ex SubType. +/// +#define MSG_FIBRECHANNELEX_DP 0x15 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Reserved for the future. + /// + UINT32 Reserved; + /// + /// 8 byte array containing Fibre Channel End Device Port Name. + /// + UINT8 WWN[8]; + /// + /// 8 byte array containing Fibre Channel Logical Unit Number. + /// + UINT8 Lun[8]; +} FIBRECHANNELEX_DEVICE_PATH; + +/// +/// 1394 Device Path SubType +/// +#define MSG_1394_DP 0x04 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Reserved for the future. + /// + UINT32 Reserved; + /// + /// 1394 Global Unique ID (GUID). + /// + UINT64 Guid; +} F1394_DEVICE_PATH; + +/// +/// USB Device Path SubType. +/// +#define MSG_USB_DP 0x05 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// USB Parent Port Number. + /// + UINT8 ParentPortNumber; + /// + /// USB Interface Number. + /// + UINT8 InterfaceNumber; +} USB_DEVICE_PATH; + +/// +/// USB Class Device Path SubType. +/// +#define MSG_USB_CLASS_DP 0x0f +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Vendor ID assigned by USB-IF. A value of 0xFFFF will + /// match any Vendor ID. + /// + UINT16 VendorId; + /// + /// Product ID assigned by USB-IF. A value of 0xFFFF will + /// match any Product ID. + /// + UINT16 ProductId; + /// + /// The class code assigned by the USB-IF. A value of 0xFF + /// will match any class code. + /// + UINT8 DeviceClass; + /// + /// The subclass code assigned by the USB-IF. A value of + /// 0xFF will match any subclass code. + /// + UINT8 DeviceSubClass; + /// + /// The protocol code assigned by the USB-IF. A value of + /// 0xFF will match any protocol code. + /// + UINT8 DeviceProtocol; +} USB_CLASS_DEVICE_PATH; + +/// +/// USB WWID Device Path SubType. +/// +#define MSG_USB_WWID_DP 0x10 + +/// +/// This device path describes a USB device using its serial number. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// USB interface number. + /// + UINT16 InterfaceNumber; + /// + /// USB vendor id of the device. + /// + UINT16 VendorId; + /// + /// USB product id of the device. + /// + UINT16 ProductId; + /// + /// Last 64-or-fewer UTF-16 characters of the USB + /// serial number. The length of the string is + /// determined by the Length field less the offset of the + /// Serial Number field (10) + /// + /// CHAR16 SerialNumber[...]; +} USB_WWID_DEVICE_PATH; + +/// +/// Device Logical Unit SubType. +/// +#define MSG_DEVICE_LOGICAL_UNIT_DP 0x11 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Logical Unit Number for the interface. + /// + UINT8 Lun; +} DEVICE_LOGICAL_UNIT_DEVICE_PATH; + +/// +/// SATA Device Path SubType. +/// +#define MSG_SATA_DP 0x12 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// The HBA port number that facilitates the connection to the + /// device or a port multiplier. The value 0xFFFF is reserved. + /// + UINT16 HBAPortNumber; + /// + /// The Port multiplier port number that facilitates the connection + /// to the device. Must be set to 0xFFFF if the device is directly + /// connected to the HBA. + /// + UINT16 PortMultiplierPortNumber; + /// + /// Logical Unit Number. + /// + UINT16 Lun; +} SATA_DEVICE_PATH; + +/// +/// Flag for if the device is directly connected to the HBA. +/// +#define SATA_HBA_DIRECT_CONNECT_FLAG 0x8000 + +/// +/// I2O Device Path SubType. +/// +#define MSG_I2O_DP 0x06 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Target ID (TID) for a device. + /// + UINT32 Tid; +} I2O_DEVICE_PATH; + +/// +/// MAC Address Device Path SubType. +/// +#define MSG_MAC_ADDR_DP 0x0b +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// The MAC address for a network interface padded with 0s. + /// + EFI_MAC_ADDRESS MacAddress; + /// + /// Network interface type(i.e. 802.3, FDDI). + /// + UINT8 IfType; +} MAC_ADDR_DEVICE_PATH; + +/// +/// IPv4 Device Path SubType +/// +#define MSG_IPv4_DP 0x0c +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// The local IPv4 address. + /// + EFI_IPv4_ADDRESS LocalIpAddress; + /// + /// The remote IPv4 address. + /// + EFI_IPv4_ADDRESS RemoteIpAddress; + /// + /// The local port number. + /// + UINT16 LocalPort; + /// + /// The remote port number. + /// + UINT16 RemotePort; + /// + /// The network protocol(i.e. UDP, TCP). + /// + UINT16 Protocol; + /// + /// 0x00 - The Source IP Address was assigned though DHCP. + /// 0x01 - The Source IP Address is statically bound. + /// + BOOLEAN StaticIpAddress; + /// + /// The gateway IP address + /// + EFI_IPv4_ADDRESS GatewayIpAddress; + /// + /// The subnet mask + /// + EFI_IPv4_ADDRESS SubnetMask; +} IPv4_DEVICE_PATH; + +/// +/// IPv6 Device Path SubType. +/// +#define MSG_IPv6_DP 0x0d +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// The local IPv6 address. + /// + EFI_IPv6_ADDRESS LocalIpAddress; + /// + /// The remote IPv6 address. + /// + EFI_IPv6_ADDRESS RemoteIpAddress; + /// + /// The local port number. + /// + UINT16 LocalPort; + /// + /// The remote port number. + /// + UINT16 RemotePort; + /// + /// The network protocol(i.e. UDP, TCP). + /// + UINT16 Protocol; + /// + /// 0x00 - The Local IP Address was manually configured. + /// 0x01 - The Local IP Address is assigned through IPv6 + /// stateless auto-configuration. + /// 0x02 - The Local IP Address is assigned through IPv6 + /// stateful configuration. + /// + UINT8 IpAddressOrigin; + /// + /// The prefix length + /// + UINT8 PrefixLength; + /// + /// The gateway IP address + /// + EFI_IPv6_ADDRESS GatewayIpAddress; +} IPv6_DEVICE_PATH; + +/// +/// InfiniBand Device Path SubType. +/// +#define MSG_INFINIBAND_DP 0x09 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Flags to help identify/manage InfiniBand device path elements: + /// Bit 0 - IOC/Service (0b = IOC, 1b = Service). + /// Bit 1 - Extend Boot Environment. + /// Bit 2 - Console Protocol. + /// Bit 3 - Storage Protocol. + /// Bit 4 - Network Protocol. + /// All other bits are reserved. + /// + UINT32 ResourceFlags; + /// + /// 128-bit Global Identifier for remote fabric port. + /// + UINT8 PortGid[16]; + /// + /// 64-bit unique identifier to remote IOC or server process. + /// Interpretation of field specified by Resource Flags (bit 0). + /// + UINT64 ServiceId; + /// + /// 64-bit persistent ID of remote IOC port. + /// + UINT64 TargetPortId; + /// + /// 64-bit persistent ID of remote device. + /// + UINT64 DeviceId; +} INFINIBAND_DEVICE_PATH; + +#define INFINIBAND_RESOURCE_FLAG_IOC_SERVICE 0x01 +#define INFINIBAND_RESOURCE_FLAG_EXTENDED_BOOT_ENVIRONMENT 0x02 +#define INFINIBAND_RESOURCE_FLAG_CONSOLE_PROTOCOL 0x04 +#define INFINIBAND_RESOURCE_FLAG_STORAGE_PROTOCOL 0x08 +#define INFINIBAND_RESOURCE_FLAG_NETWORK_PROTOCOL 0x10 + +/// +/// UART Device Path SubType. +/// +#define MSG_UART_DP 0x0e +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Reserved. + /// + UINT32 Reserved; + /// + /// The baud rate setting for the UART style device. A value of 0 + /// means that the device's default baud rate will be used. + /// + UINT64 BaudRate; + /// + /// The number of data bits for the UART style device. A value + /// of 0 means that the device's default number of data bits will be used. + /// + UINT8 DataBits; + /// + /// The parity setting for the UART style device. + /// Parity 0x00 - Default Parity. + /// Parity 0x01 - No Parity. + /// Parity 0x02 - Even Parity. + /// Parity 0x03 - Odd Parity. + /// Parity 0x04 - Mark Parity. + /// Parity 0x05 - Space Parity. + /// + UINT8 Parity; + /// + /// The number of stop bits for the UART style device. + /// Stop Bits 0x00 - Default Stop Bits. + /// Stop Bits 0x01 - 1 Stop Bit. + /// Stop Bits 0x02 - 1.5 Stop Bits. + /// Stop Bits 0x03 - 2 Stop Bits. + /// + UINT8 StopBits; +} UART_DEVICE_PATH; + +/// +/// NVDIMM Namespace Device Path SubType. +/// +#define NVDIMM_NAMESPACE_DP 0x20 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Namespace unique label identifier UUID. + /// + EFI_GUID Uuid; +} NVDIMM_NAMESPACE_DEVICE_PATH; + +// +// Use VENDOR_DEVICE_PATH struct +// +#define MSG_VENDOR_DP 0x0a +typedef VENDOR_DEVICE_PATH VENDOR_DEFINED_DEVICE_PATH; + +#define DEVICE_PATH_MESSAGING_PC_ANSI EFI_PC_ANSI_GUID +#define DEVICE_PATH_MESSAGING_VT_100 EFI_VT_100_GUID +#define DEVICE_PATH_MESSAGING_VT_100_PLUS EFI_VT_100_PLUS_GUID +#define DEVICE_PATH_MESSAGING_VT_UTF8 EFI_VT_UTF8_GUID + +/// +/// A new device path node is defined to declare flow control characteristics. +/// UART Flow Control Messaging Device Path +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// DEVICE_PATH_MESSAGING_UART_FLOW_CONTROL GUID. + /// + EFI_GUID Guid; + /// + /// Bitmap of supported flow control types. + /// Bit 0 set indicates hardware flow control. + /// Bit 1 set indicates Xon/Xoff flow control. + /// All other bits are reserved and are clear. + /// + UINT32 FlowControlMap; +} UART_FLOW_CONTROL_DEVICE_PATH; + +#define UART_FLOW_CONTROL_HARDWARE 0x00000001 +#define UART_FLOW_CONTROL_XON_XOFF 0x00000010 + +#define DEVICE_PATH_MESSAGING_SAS EFI_SAS_DEVICE_PATH_GUID +/// +/// Serial Attached SCSI (SAS) Device Path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// DEVICE_PATH_MESSAGING_SAS GUID. + /// + EFI_GUID Guid; + /// + /// Reserved for future use. + /// + UINT32 Reserved; + /// + /// SAS Address for Serial Attached SCSI Target. + /// + UINT64 SasAddress; + /// + /// SAS Logical Unit Number. + /// + UINT64 Lun; + /// + /// More Information about the device and its interconnect. + /// + UINT16 DeviceTopology; + /// + /// Relative Target Port (RTP). + /// + UINT16 RelativeTargetPort; +} SAS_DEVICE_PATH; + +/// +/// Serial Attached SCSI (SAS) Ex Device Path SubType +/// +#define MSG_SASEX_DP 0x16 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// 8-byte array of the SAS Address for Serial Attached SCSI Target Port. + /// + UINT8 SasAddress[8]; + /// + /// 8-byte array of the SAS Logical Unit Number. + /// + UINT8 Lun[8]; + /// + /// More Information about the device and its interconnect. + /// + UINT16 DeviceTopology; + /// + /// Relative Target Port (RTP). + /// + UINT16 RelativeTargetPort; +} SASEX_DEVICE_PATH; + +/// +/// NvmExpress Namespace Device Path SubType. +/// +#define MSG_NVME_NAMESPACE_DP 0x17 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + UINT32 NamespaceId; + UINT64 NamespaceUuid; +} NVME_NAMESPACE_DEVICE_PATH; + +/// +/// DNS Device Path SubType +/// +#define MSG_DNS_DP 0x1F +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Indicates the DNS server address is IPv4 or IPv6 address. + /// + UINT8 IsIPv6; + /// + /// Instance of the DNS server address. + /// + EFI_IP_ADDRESS DnsServerIp[]; +} DNS_DEVICE_PATH; + +/// +/// Uniform Resource Identifiers (URI) Device Path SubType +/// +#define MSG_URI_DP 0x18 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Instance of the URI pursuant to RFC 3986. + /// + CHAR8 Uri[]; +} URI_DEVICE_PATH; + +/// +/// Universal Flash Storage (UFS) Device Path SubType. +/// +#define MSG_UFS_DP 0x19 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Target ID on the UFS bus (PUN). + /// + UINT8 Pun; + /// + /// Logical Unit Number (LUN). + /// + UINT8 Lun; +} UFS_DEVICE_PATH; + +/// +/// SD (Secure Digital) Device Path SubType. +/// +#define MSG_SD_DP 0x1A +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + UINT8 SlotNumber; +} SD_DEVICE_PATH; + +/// +/// EMMC (Embedded MMC) Device Path SubType. +/// +#define MSG_EMMC_DP 0x1D +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + UINT8 SlotNumber; +} EMMC_DEVICE_PATH; + +/// +/// iSCSI Device Path SubType +/// +#define MSG_ISCSI_DP 0x13 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Network Protocol (0 = TCP, 1+ = reserved). + /// + UINT16 NetworkProtocol; + /// + /// iSCSI Login Options. + /// + UINT16 LoginOption; + /// + /// iSCSI Logical Unit Number. + /// + UINT64 Lun; + /// + /// iSCSI Target Portal group tag the initiator intends + /// to establish a session with. + /// + UINT16 TargetPortalGroupTag; + /// + /// iSCSI NodeTarget Name. The length of the name + /// is determined by subtracting the offset of this field from Length. + /// + /// CHAR8 iSCSI Target Name. +} ISCSI_DEVICE_PATH; + +#define ISCSI_LOGIN_OPTION_NO_HEADER_DIGEST 0x0000 +#define ISCSI_LOGIN_OPTION_HEADER_DIGEST_USING_CRC32C 0x0002 +#define ISCSI_LOGIN_OPTION_NO_DATA_DIGEST 0x0000 +#define ISCSI_LOGIN_OPTION_DATA_DIGEST_USING_CRC32C 0x0008 +#define ISCSI_LOGIN_OPTION_AUTHMETHOD_CHAP 0x0000 +#define ISCSI_LOGIN_OPTION_AUTHMETHOD_NON 0x1000 +#define ISCSI_LOGIN_OPTION_CHAP_BI 0x0000 +#define ISCSI_LOGIN_OPTION_CHAP_UNI 0x2000 + +/// +/// VLAN Device Path SubType. +/// +#define MSG_VLAN_DP 0x14 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// VLAN identifier (0-4094). + /// + UINT16 VlanId; +} VLAN_DEVICE_PATH; + +/// +/// Bluetooth Device Path SubType. +/// +#define MSG_BLUETOOTH_DP 0x1b +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// 48bit Bluetooth device address. + /// + BLUETOOTH_ADDRESS BD_ADDR; +} BLUETOOTH_DEVICE_PATH; + +/// +/// Wi-Fi Device Path SubType. +/// +#define MSG_WIFI_DP 0x1C +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Service set identifier. A 32-byte octets string. + /// + UINT8 SSId[32]; +} WIFI_DEVICE_PATH; + +/// +/// Bluetooth LE Device Path SubType. +/// +#define MSG_BLUETOOTH_LE_DP 0x1E +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + BLUETOOTH_LE_ADDRESS Address; +} BLUETOOTH_LE_DEVICE_PATH; + +// +// Media Device Path +// +#define MEDIA_DEVICE_PATH 0x04 + +/// +/// Hard Drive Media Device Path SubType. +/// +#define MEDIA_HARDDRIVE_DP 0x01 + +/// +/// The Hard Drive Media Device Path is used to represent a partition on a hard drive. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Describes the entry in a partition table, starting with entry 1. + /// Partition number zero represents the entire device. Valid + /// partition numbers for a MBR partition are [1, 4]. Valid + /// partition numbers for a GPT partition are [1, NumberOfPartitionEntries]. + /// + UINT32 PartitionNumber; + /// + /// Starting LBA of the partition on the hard drive. + /// + UINT64 PartitionStart; + /// + /// Size of the partition in units of Logical Blocks. + /// + UINT64 PartitionSize; + /// + /// Signature unique to this partition: + /// If SignatureType is 0, this field has to be initialized with 16 zeros. + /// If SignatureType is 1, the MBR signature is stored in the first 4 bytes of this field. + /// The other 12 bytes are initialized with zeros. + /// If SignatureType is 2, this field contains a 16 byte signature. + /// + UINT8 Signature[16]; + /// + /// Partition Format: (Unused values reserved). + /// 0x01 - PC-AT compatible legacy MBR. + /// 0x02 - GUID Partition Table. + /// + UINT8 MBRType; + /// + /// Type of Disk Signature: (Unused values reserved). + /// 0x00 - No Disk Signature. + /// 0x01 - 32-bit signature from address 0x1b8 of the type 0x01 MBR. + /// 0x02 - GUID signature. + /// + UINT8 SignatureType; +} HARDDRIVE_DEVICE_PATH; + +#define MBR_TYPE_PCAT 0x01 +#define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02 + +#define NO_DISK_SIGNATURE 0x00 +#define SIGNATURE_TYPE_MBR 0x01 +#define SIGNATURE_TYPE_GUID 0x02 + +/// +/// CD-ROM Media Device Path SubType. +/// +#define MEDIA_CDROM_DP 0x02 + +/// +/// The CD-ROM Media Device Path is used to define a system partition that exists on a CD-ROM. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Boot Entry number from the Boot Catalog. The Initial/Default entry is defined as zero. + /// + UINT32 BootEntry; + /// + /// Starting RBA of the partition on the medium. CD-ROMs use Relative logical Block Addressing. + /// + UINT64 PartitionStart; + /// + /// Size of the partition in units of Blocks, also called Sectors. + /// + UINT64 PartitionSize; +} CDROM_DEVICE_PATH; + +// +// Use VENDOR_DEVICE_PATH struct +// +#define MEDIA_VENDOR_DP 0x03 ///< Media vendor device path subtype. + +/// +/// File Path Media Device Path SubType +/// +#define MEDIA_FILEPATH_DP 0x04 +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// A NULL-terminated Path string including directory and file names. + /// + CHAR16 PathName[1]; +} FILEPATH_DEVICE_PATH; + +#define SIZE_OF_FILEPATH_DEVICE_PATH OFFSET_OF(FILEPATH_DEVICE_PATH,PathName) + +/// +/// Media Protocol Device Path SubType. +/// +#define MEDIA_PROTOCOL_DP 0x05 + +/// +/// The Media Protocol Device Path is used to denote the protocol that is being +/// used in a device path at the location of the path specified. +/// Many protocols are inherent to the style of device path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// The ID of the protocol. + /// + EFI_GUID Protocol; +} MEDIA_PROTOCOL_DEVICE_PATH; + +/// +/// PIWG Firmware File SubType. +/// +#define MEDIA_PIWG_FW_FILE_DP 0x06 + +/// +/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware file. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Firmware file name + /// + EFI_GUID FvFileName; +} MEDIA_FW_VOL_FILEPATH_DEVICE_PATH; + +/// +/// PIWG Firmware Volume Device Path SubType. +/// +#define MEDIA_PIWG_FW_VOL_DP 0x07 + +/// +/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware volume. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Firmware volume name. + /// + EFI_GUID FvName; +} MEDIA_FW_VOL_DEVICE_PATH; + +/// +/// Media relative offset range device path. +/// +#define MEDIA_RELATIVE_OFFSET_RANGE_DP 0x08 + +/// +/// Used to describe the offset range of media relative. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + UINT32 Reserved; + UINT64 StartingOffset; + UINT64 EndingOffset; +} MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH; + +/// +/// This GUID defines a RAM Disk supporting a raw disk format in volatile memory. +/// +#define EFI_VIRTUAL_DISK_GUID \ + { \ + 0x77AB535A, 0x45FC, 0x624B, {0x55, 0x60, 0xF7, 0xB2, 0x81, 0xD1, 0xF9, 0x6E } \ + } + +extern EFI_GUID gEfiVirtualDiskGuid; + +/// +/// This GUID defines a RAM Disk supporting an ISO image in volatile memory. +/// +#define EFI_VIRTUAL_CD_GUID \ + { \ + 0x3D5ABD30, 0x4175, 0x87CE, {0x6D, 0x64, 0xD2, 0xAD, 0xE5, 0x23, 0xC4, 0xBB } \ + } +extern EFI_GUID gEfiVirtualCdGuid; + +/// +/// This GUID defines a RAM Disk supporting a raw disk format in persistent memory. +/// +#define EFI_PERSISTENT_VIRTUAL_DISK_GUID \ + { \ + 0x5CEA02C9, 0x4D07, 0x69D3, {0x26, 0x9F ,0x44, 0x96, 0xFB, 0xE0, 0x96, 0xF9 } \ + } + +extern EFI_GUID gEfiPersistentVirtualDiskGuid; + +/// +/// This GUID defines a RAM Disk supporting an ISO image in persistent memory. +/// +#define EFI_PERSISTENT_VIRTUAL_CD_GUID \ + { \ + 0x08018188, 0x42CD, 0xBB48, {0x10, 0x0F, 0x53, 0x87, 0xD5, 0x3D, 0xED, 0x3D } \ + } + +extern EFI_GUID gEfiPersistentVirtualCdGuid; + +/// +/// Media ram disk device path. +/// +#define MEDIA_RAM_DISK_DP 0x09 + +/// +/// Used to describe the ram disk device path. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Starting Memory Address. + /// + UINT32 StartingAddr[2]; + /// + /// Ending Memory Address. + /// + UINT32 EndingAddr[2]; + /// + /// GUID that defines the type of the RAM Disk. + /// + EFI_GUID TypeGuid; + /// + /// RAM Diskinstance number, if supported. The default value is zero. + /// + UINT16 Instance; +} MEDIA_RAM_DISK_DEVICE_PATH; + +/// +/// BIOS Boot Specification Device Path. +/// +#define BBS_DEVICE_PATH 0x05 + +/// +/// BIOS Boot Specification Device Path SubType. +/// +#define BBS_BBS_DP 0x01 + +/// +/// This Device Path is used to describe the booting of non-EFI-aware operating systems. +/// +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + /// + /// Device Type as defined by the BIOS Boot Specification. + /// + UINT16 DeviceType; + /// + /// Status Flags as defined by the BIOS Boot Specification. + /// + UINT16 StatusFlag; + /// + /// Null-terminated ASCII string that describes the boot device to a user. + /// + CHAR8 String[1]; +} BBS_BBS_DEVICE_PATH; + +// +// DeviceType definitions - from BBS specification +// +#define BBS_TYPE_FLOPPY 0x01 +#define BBS_TYPE_HARDDRIVE 0x02 +#define BBS_TYPE_CDROM 0x03 +#define BBS_TYPE_PCMCIA 0x04 +#define BBS_TYPE_USB 0x05 +#define BBS_TYPE_EMBEDDED_NETWORK 0x06 +#define BBS_TYPE_BEV 0x80 +#define BBS_TYPE_UNKNOWN 0xFF + + +/// +/// Union of all possible Device Paths and pointers to Device Paths. +/// +typedef union { + EFI_DEVICE_PATH_PROTOCOL DevPath; + PCI_DEVICE_PATH Pci; + PCCARD_DEVICE_PATH PcCard; + MEMMAP_DEVICE_PATH MemMap; + VENDOR_DEVICE_PATH Vendor; + + CONTROLLER_DEVICE_PATH Controller; + BMC_DEVICE_PATH Bmc; + ACPI_HID_DEVICE_PATH Acpi; + ACPI_EXTENDED_HID_DEVICE_PATH ExtendedAcpi; + ACPI_ADR_DEVICE_PATH AcpiAdr; + + ATAPI_DEVICE_PATH Atapi; + SCSI_DEVICE_PATH Scsi; + ISCSI_DEVICE_PATH Iscsi; + FIBRECHANNEL_DEVICE_PATH FibreChannel; + FIBRECHANNELEX_DEVICE_PATH FibreChannelEx; + + F1394_DEVICE_PATH F1394; + USB_DEVICE_PATH Usb; + SATA_DEVICE_PATH Sata; + USB_CLASS_DEVICE_PATH UsbClass; + USB_WWID_DEVICE_PATH UsbWwid; + DEVICE_LOGICAL_UNIT_DEVICE_PATH LogicUnit; + I2O_DEVICE_PATH I2O; + MAC_ADDR_DEVICE_PATH MacAddr; + IPv4_DEVICE_PATH Ipv4; + IPv6_DEVICE_PATH Ipv6; + VLAN_DEVICE_PATH Vlan; + INFINIBAND_DEVICE_PATH InfiniBand; + UART_DEVICE_PATH Uart; + UART_FLOW_CONTROL_DEVICE_PATH UartFlowControl; + SAS_DEVICE_PATH Sas; + SASEX_DEVICE_PATH SasEx; + NVME_NAMESPACE_DEVICE_PATH NvmeNamespace; + DNS_DEVICE_PATH Dns; + URI_DEVICE_PATH Uri; + BLUETOOTH_DEVICE_PATH Bluetooth; + WIFI_DEVICE_PATH WiFi; + UFS_DEVICE_PATH Ufs; + SD_DEVICE_PATH Sd; + EMMC_DEVICE_PATH Emmc; + HARDDRIVE_DEVICE_PATH HardDrive; + CDROM_DEVICE_PATH CD; + + FILEPATH_DEVICE_PATH FilePath; + MEDIA_PROTOCOL_DEVICE_PATH MediaProtocol; + + MEDIA_FW_VOL_DEVICE_PATH FirmwareVolume; + MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FirmwareFile; + MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH Offset; + MEDIA_RAM_DISK_DEVICE_PATH RamDisk; + BBS_BBS_DEVICE_PATH Bbs; +} EFI_DEV_PATH; + + + +typedef union { + EFI_DEVICE_PATH_PROTOCOL *DevPath; + PCI_DEVICE_PATH *Pci; + PCCARD_DEVICE_PATH *PcCard; + MEMMAP_DEVICE_PATH *MemMap; + VENDOR_DEVICE_PATH *Vendor; + + CONTROLLER_DEVICE_PATH *Controller; + BMC_DEVICE_PATH *Bmc; + ACPI_HID_DEVICE_PATH *Acpi; + ACPI_EXTENDED_HID_DEVICE_PATH *ExtendedAcpi; + ACPI_ADR_DEVICE_PATH *AcpiAdr; + + ATAPI_DEVICE_PATH *Atapi; + SCSI_DEVICE_PATH *Scsi; + ISCSI_DEVICE_PATH *Iscsi; + FIBRECHANNEL_DEVICE_PATH *FibreChannel; + FIBRECHANNELEX_DEVICE_PATH *FibreChannelEx; + + F1394_DEVICE_PATH *F1394; + USB_DEVICE_PATH *Usb; + SATA_DEVICE_PATH *Sata; + USB_CLASS_DEVICE_PATH *UsbClass; + USB_WWID_DEVICE_PATH *UsbWwid; + DEVICE_LOGICAL_UNIT_DEVICE_PATH *LogicUnit; + I2O_DEVICE_PATH *I2O; + MAC_ADDR_DEVICE_PATH *MacAddr; + IPv4_DEVICE_PATH *Ipv4; + IPv6_DEVICE_PATH *Ipv6; + VLAN_DEVICE_PATH *Vlan; + INFINIBAND_DEVICE_PATH *InfiniBand; + UART_DEVICE_PATH *Uart; + UART_FLOW_CONTROL_DEVICE_PATH *UartFlowControl; + SAS_DEVICE_PATH *Sas; + SASEX_DEVICE_PATH *SasEx; + NVME_NAMESPACE_DEVICE_PATH *NvmeNamespace; + DNS_DEVICE_PATH *Dns; + URI_DEVICE_PATH *Uri; + BLUETOOTH_DEVICE_PATH *Bluetooth; + WIFI_DEVICE_PATH *WiFi; + UFS_DEVICE_PATH *Ufs; + SD_DEVICE_PATH *Sd; + EMMC_DEVICE_PATH *Emmc; + HARDDRIVE_DEVICE_PATH *HardDrive; + CDROM_DEVICE_PATH *CD; + + FILEPATH_DEVICE_PATH *FilePath; + MEDIA_PROTOCOL_DEVICE_PATH *MediaProtocol; + + MEDIA_FW_VOL_DEVICE_PATH *FirmwareVolume; + MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *FirmwareFile; + MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH *Offset; + MEDIA_RAM_DISK_DEVICE_PATH *RamDisk; + BBS_BBS_DEVICE_PATH *Bbs; + UINT8 *Raw; +} EFI_DEV_PATH_PTR; + +#define EFI_DEBUGPORT_PROTOCOL_GUID \ + { \ + 0xEBA4E8D2, 0x3858, 0x41EC, {0xA2, 0x81, 0x26, 0x47, 0xBA, 0x96, 0x60, 0xD0 } \ + } +// +// DEBUGPORT variable definitions... +// +#define EFI_DEBUGPORT_VARIABLE_NAME L"DEBUGPORT" +#define EFI_DEBUGPORT_VARIABLE_GUID EFI_DEBUGPORT_PROTOCOL_GUID +extern EFI_GUID gEfiDebugPortVariableGuid; + +// +// DebugPort device path definitions... +// +#define DEVICE_PATH_MESSAGING_DEBUGPORT EFI_DEBUGPORT_PROTOCOL_GUID +extern EFI_GUID gEfiDebugPortProtocolGuid; + +typedef struct { + EFI_DEVICE_PATH_PROTOCOL Header; + EFI_GUID Guid; +} DEBUGPORT_DEVICE_PATH; + +#pragma pack() + +#define END_DEVICE_PATH_TYPE 0x7f +#define END_ENTIRE_DEVICE_PATH_SUBTYPE 0xFF +#define END_INSTANCE_DEVICE_PATH_SUBTYPE 0x01 + +extern EFI_GUID gEfiDevicePathProtocolGuid; + +#endif diff --git a/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h new file mode 100644 index 00000000..bd6920c6 --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h @@ -0,0 +1,288 @@ +/** @file + EFI_DEVICE_PATH_UTILITIES_PROTOCOL as defined in UEFI 2.0. + Use to create and manipulate device paths and device nodes. + + Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __DEVICE_PATH_UTILITIES_H__ +#define __DEVICE_PATH_UTILITIES_H__ + +/// +/// Device Path Utilities protocol +/// +#define EFI_DEVICE_PATH_UTILITIES_GUID \ + { \ + 0x379be4e, 0xd706, 0x437d, {0xb0, 0x37, 0xed, 0xb8, 0x2f, 0xb7, 0x72, 0xa4 } \ + } + +/** + Returns the size of the device path, in bytes. + + @param DevicePath Points to the start of the EFI device path. + + @return Size Size of the specified device path, in bytes, including the end-of-path tag. + @retval 0 DevicePath is NULL + +**/ +typedef +UINTN +( *EFI_DEVICE_PATH_UTILS_GET_DEVICE_PATH_SIZE)( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath + ); + + +/** + Create a duplicate of the specified path. + + @param DevicePath Points to the source EFI device path. + + @retval Pointer A pointer to the duplicate device path. + @retval NULL insufficient memory or DevicePath is NULL + +**/ +typedef +EFI_DEVICE_PATH_PROTOCOL* +( *EFI_DEVICE_PATH_UTILS_DUP_DEVICE_PATH)( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath + ); + +/** + Create a new path by appending the second device path to the first. + If Src1 is NULL and Src2 is non-NULL, then a duplicate of Src2 is returned. + If Src1 is non-NULL and Src2 is NULL, then a duplicate of Src1 is returned. + If Src1 and Src2 are both NULL, then a copy of an end-of-device-path is returned. + + @param Src1 Points to the first device path. + @param Src2 Points to the second device path. + + @retval Pointer A pointer to the newly created device path. + @retval NULL Memory could not be allocated + +**/ +typedef +EFI_DEVICE_PATH_PROTOCOL* +( *EFI_DEVICE_PATH_UTILS_APPEND_PATH)( + CONST EFI_DEVICE_PATH_PROTOCOL *Src1, + CONST EFI_DEVICE_PATH_PROTOCOL *Src2 + ); + +/** + Creates a new path by appending the device node to the device path. + If DeviceNode is NULL then a copy of DevicePath is returned. + If DevicePath is NULL then a copy of DeviceNode, followed by an end-of-device path device node is returned. + If both DeviceNode and DevicePath are NULL then a copy of an end-of-device-path device node is returned. + + @param DevicePath Points to the device path. + @param DeviceNode Points to the device node. + + @retval Pointer A pointer to the allocated device node. + @retval NULL There was insufficient memory. + +**/ +typedef +EFI_DEVICE_PATH_PROTOCOL* +( *EFI_DEVICE_PATH_UTILS_APPEND_NODE)( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath, + CONST EFI_DEVICE_PATH_PROTOCOL *DeviceNode + ); + +/** + Creates a new path by appending the specified device path instance to the specified device path. + + @param DevicePath Points to the device path. If NULL, then ignored. + @param DevicePathInstance Points to the device path instance. + + @retval Pointer A pointer to the newly created device path + @retval NULL Memory could not be allocated or DevicePathInstance is NULL. + +**/ +typedef +EFI_DEVICE_PATH_PROTOCOL* +( *EFI_DEVICE_PATH_UTILS_APPEND_INSTANCE)( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath, + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathInstance + ); + +/** + Creates a copy of the current device path instance and returns a pointer to the next device path + instance. + + @param DevicePathInstance On input, this holds the pointer to the current device path + instance. On output, this holds the pointer to the next + device path instance or NULL if there are no more device + path instances in the device path. + @param DevicePathInstanceSize On output, this holds the size of the device path instance, + in bytes or zero, if DevicePathInstance is NULL. + If NULL, then the instance size is not output. + + @retval Pointer A pointer to the copy of the current device path instance. + @retval NULL DevicePathInstance was NULL on entry or there was insufficient memory. + +**/ +typedef +EFI_DEVICE_PATH_PROTOCOL* +( *EFI_DEVICE_PATH_UTILS_GET_NEXT_INSTANCE)( + EFI_DEVICE_PATH_PROTOCOL **DevicePathInstance, + UINTN *DevicePathInstanceSize + ); + +/** + Creates a device node + + @param NodeType NodeType is the device node type (EFI_DEVICE_PATH.Type) for + the new device node. + @param NodeSubType NodeSubType is the device node sub-type + EFI_DEVICE_PATH.SubType) for the new device node. + @param NodeLength NodeLength is the length of the device node + (EFI_DEVICE_PATH.Length) for the new device node. + + @retval Pointer A pointer to the newly created device node. + @retval NULL NodeLength is less than + the size of the header or there was insufficient memory. + +**/ +typedef +EFI_DEVICE_PATH_PROTOCOL* +( *EFI_DEVICE_PATH_UTILS_CREATE_NODE)( + UINT8 NodeType, + UINT8 NodeSubType, + UINT16 NodeLength +); + +/** + Returns whether a device path is multi-instance. + + @param DevicePath Points to the device path. If NULL, then ignored. + + @retval TRUE The device path has more than one instance + @retval FALSE The device path is empty or contains only a single instance. + +**/ +typedef +BOOLEAN +( *EFI_DEVICE_PATH_UTILS_IS_MULTI_INSTANCE)( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath + ); + +/// +/// This protocol is used to creates and manipulates device paths and device nodes. +/// +typedef struct { + EFI_DEVICE_PATH_UTILS_GET_DEVICE_PATH_SIZE GetDevicePathSize; + EFI_DEVICE_PATH_UTILS_DUP_DEVICE_PATH DuplicateDevicePath; + EFI_DEVICE_PATH_UTILS_APPEND_PATH AppendDevicePath; + EFI_DEVICE_PATH_UTILS_APPEND_NODE AppendDeviceNode; + EFI_DEVICE_PATH_UTILS_APPEND_INSTANCE AppendDevicePathInstance; + EFI_DEVICE_PATH_UTILS_GET_NEXT_INSTANCE GetNextDevicePathInstance; + EFI_DEVICE_PATH_UTILS_IS_MULTI_INSTANCE IsDevicePathMultiInstance; + EFI_DEVICE_PATH_UTILS_CREATE_NODE CreateDeviceNode; +} EFI_DEVICE_PATH_UTILITIES_PROTOCOL; + +extern EFI_GUID gEfiDevicePathUtilitiesProtocolGuid; + +VOID +SetDevicePathEndNode ( + VOID *Node + ); + +BOOLEAN +IsDevicePathValid ( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath, + UINTN MaxSize + ); + +UINT8 +DevicePathType ( + CONST VOID *Node + ); + +UINT8 +DevicePathSubType ( + CONST VOID *Node + ); + +UINTN +DevicePathNodeLength ( + CONST VOID *Node + ); + +EFI_DEVICE_PATH_PROTOCOL * +NextDevicePathNode ( + CONST VOID *Node + ); + +BOOLEAN +IsDevicePathEndType ( + CONST VOID *Node + ); + +BOOLEAN +IsDevicePathEnd ( + CONST VOID *Node + ); +BOOLEAN +IsDevicePathEndInstance ( + CONST VOID *Node + ); + +UINT16 +SetDevicePathNodeLength ( + VOID *Node, + UINTN Length + ); + +VOID +SetDevicePathEndNode ( + VOID *Node + ); + +UINTN +UefiDevicePathLibGetDevicePathSize ( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath + ); + +EFI_DEVICE_PATH_PROTOCOL * +UefiDevicePathLibDuplicateDevicePath ( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath + ); + +EFI_DEVICE_PATH_PROTOCOL * +UefiDevicePathLibAppendDevicePath ( + CONST EFI_DEVICE_PATH_PROTOCOL *FirstDevicePath, + CONST EFI_DEVICE_PATH_PROTOCOL *SecondDevicePath + ); + +EFI_DEVICE_PATH_PROTOCOL * +UefiDevicePathLibAppendDevicePathNode ( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath, + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathNode + ); + +EFI_DEVICE_PATH_PROTOCOL * +UefiDevicePathLibAppendDevicePathInstance ( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath, + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathInstance + ); + +EFI_DEVICE_PATH_PROTOCOL * +UefiDevicePathLibGetNextDevicePathInstance ( + EFI_DEVICE_PATH_PROTOCOL **DevicePath, + UINTN *Size + ); + +EFI_DEVICE_PATH_PROTOCOL * +UefiDevicePathLibCreateDeviceNode ( + UINT8 NodeType, + UINT8 NodeSubType, + UINT16 NodeLength + ); + +BOOLEAN +UefiDevicePathLibIsDevicePathMultiInstance ( + CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath + ); + +#endif diff --git a/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/GraphicsOutput.h b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/GraphicsOutput.h new file mode 100644 index 00000000..d075365c --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/GraphicsOutput.h @@ -0,0 +1,187 @@ +/** @file + Graphics Output Protocol from the UEFI 2.0 specification. + + Abstraction of a very simple graphics device. + + Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> + + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __GRAPHICS_OUTPUT_H__ +#define __GRAPHICS_OUTPUT_H__ + +#define EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID \ + { \ + 0x9042a9de, 0x23dc, 0x4a38, {0x96, 0xfb, 0x7a, 0xde, 0xd0, 0x80, 0x51, 0x6a } \ + } + +typedef struct _EFI_GRAPHICS_OUTPUT_PROTOCOL EFI_GRAPHICS_OUTPUT_PROTOCOL; + +typedef struct { + UINT32 RedMask; + UINT32 GreenMask; + UINT32 BlueMask; + UINT32 ReservedMask; +} EFI_PIXEL_BITMASK; + +typedef enum { + PixelRedGreenBlueReserved8BitPerColor, + PixelBlueGreenRedReserved8BitPerColor, + PixelBitMask, + PixelBltOnly, + PixelFormatMax +} EFI_GRAPHICS_PIXEL_FORMAT; + +typedef struct { + UINT32 Version; + UINT32 HorizontalResolution; + UINT32 VerticalResolution; + EFI_GRAPHICS_PIXEL_FORMAT PixelFormat; + EFI_PIXEL_BITMASK PixelInformation; + UINT32 PixelsPerScanLine; +} EFI_GRAPHICS_OUTPUT_MODE_INFORMATION; + +/** + Return the current video mode information. + + @param This Protocol instance pointer. + @param ModeNumber The mode number to return information on. + @param SizeOfInfo A pointer to the size, in bytes, of the Info buffer. + @param Info A pointer to callee allocated buffer that returns information about ModeNumber. + + @retval EFI_SUCCESS Mode information returned. + @retval EFI_BUFFER_TOO_SMALL The Info buffer was too small. + @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the video mode. + @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode () + @retval EFI_INVALID_PARAMETER One of the input args was NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE) ( + IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, + IN UINT32 ModeNumber, + OUT UINTN *SizeOfInfo, + OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info + ) +; + +/** + Return the current video mode information. + + @param This Protocol instance pointer. + @param ModeNumber The mode number to be set. + + @retval EFI_SUCCESS Graphics mode was changed. + @retval EFI_DEVICE_ERROR The device had an error and could not complete the request. + @retval EFI_UNSUPPORTED ModeNumber is not supported by this device. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE) ( + IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, + IN UINT32 ModeNumber + ) +; + +typedef struct { + UINT8 Blue; + UINT8 Green; + UINT8 Red; + UINT8 Reserved; +} EFI_GRAPHICS_OUTPUT_BLT_PIXEL; + +typedef union { + EFI_GRAPHICS_OUTPUT_BLT_PIXEL Pixel; + UINT32 Raw; +} EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION; + +typedef enum { + EfiBltVideoFill, + EfiBltVideoToBltBuffer, + EfiBltBufferToVideo, + EfiBltVideoToVideo, + EfiGraphicsOutputBltOperationMax +} EFI_GRAPHICS_OUTPUT_BLT_OPERATION; + +/** + The following table defines actions for BltOperations: + + <B>EfiBltVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY) + directly to every pixel of the video display rectangle + (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height). + Only one pixel will be used from the BltBuffer. Delta is NOT used. + + <B>EfiBltVideoToBltBuffer</B> - Read data from the video display rectangle + (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in + the BltBuffer rectangle (DestinationX, DestinationY ) + (DestinationX + Width, DestinationY + Height). If DestinationX or + DestinationY is not zero then Delta must be set to the length in bytes + of a row in the BltBuffer. + + <B>EfiBltBufferToVideo</B> - Write data from the BltBuffer rectangle + (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the + video display rectangle (DestinationX, DestinationY) + (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is + not zero then Delta must be set to the length in bytes of a row in the + BltBuffer. + + <B>EfiBltVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY) + (SourceX + Width, SourceY + Height) .to the video display rectangle + (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height). + The BltBuffer and Delta are not used in this mode. + + @param This Protocol instance pointer. + @param BltBuffer Buffer containing data to blit into video buffer. This + buffer has a size of Width*Height*sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL) + @param BltOperation Operation to perform on BlitBuffer and video memory + @param SourceX X coordinate of source for the BltBuffer. + @param SourceY Y coordinate of source for the BltBuffer. + @param DestinationX X coordinate of destination for the BltBuffer. + @param DestinationY Y coordinate of destination for the BltBuffer. + @param Width Width of rectangle in BltBuffer in pixels. + @param Height Height of rectangle in BltBuffer in pixels. + @param Delta OPTIONAL + + @retval EFI_SUCCESS The Blt operation completed. + @retval EFI_INVALID_PARAMETER BltOperation is not valid. + @retval EFI_DEVICE_ERROR A hardware error occurred writing to the video buffer. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT) ( + IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This, + IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL + IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation, + IN UINTN SourceX, + IN UINTN SourceY, + IN UINTN DestinationX, + IN UINTN DestinationY, + IN UINTN Width, + IN UINTN Height, + IN UINTN Delta OPTIONAL + ); + +typedef struct { + UINT32 MaxMode; + UINT32 Mode; + EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info; + UINTN SizeOfInfo; + EFI_PHYSICAL_ADDRESS FrameBufferBase; + UINTN FrameBufferSize; +} EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE; + +struct _EFI_GRAPHICS_OUTPUT_PROTOCOL { + EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE QueryMode; + EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE SetMode; + EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT Blt; + EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE *Mode; +}; + +extern EFI_GUID gEfiGraphicsOutputProtocolGuid; + +#endif diff --git a/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h new file mode 100644 index 00000000..6dfe1db3 --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h @@ -0,0 +1,145 @@ +/** @file + This file declares GUIDed section extraction protocol. + + This interface provides a means of decoding a GUID defined encapsulation + section. There may be multiple different GUIDs associated with the GUIDed + section extraction protocol. That is, all instances of the GUIDed section + extraction protocol must have the same interface structure. + + @par Revision Reference: PI + Version 1.00. + + Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> + + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL_H__ +#define __EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL_H__ + +// +// Forward reference for pure ANSI compatibility + +typedef struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL; + + +/** + The ExtractSection() function processes the input section and + allocates a buffer from the pool in which it returns the section + contents. If the section being extracted contains + authentication information (the section's + GuidedSectionHeader.Attributes field has the + EFI_GUIDED_SECTION_AUTH_STATUS_VALID bit set), the values + returned in AuthenticationStatus must reflect the results of + the authentication operation. Depending on the algorithm and + size of the encapsulated data, the time that is required to do + a full authentication may be prohibitively long for some + classes of systems. To indicate this, use + EFI_SECURITY_POLICY_PROTOCOL_GUID, which may be published by + the security policy driver (see the Platform Initialization + Driver Execution Environment Core Interface Specification for + more details and the GUID definition). If the + EFI_SECURITY_POLICY_PROTOCOL_GUID exists in the handle + database, then, if possible, full authentication should be + skipped and the section contents simply returned in the + OutputBuffer. In this case, the + EFI_AUTH_STATUS_PLATFORM_OVERRIDE bit AuthenticationStatus + must be set on return. ExtractSection() is callable only from + TPL_NOTIFY and below. Behavior of ExtractSection() at any + EFI_TPL above TPL_NOTIFY is undefined. Type EFI_TPL is + defined in RaiseTPL() in the UEFI 2.0 specification. + + + @param This Indicates the + EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL instance. + + @param InputSection Buffer containing the input GUIDed section + to be processed. OutputBuffer OutputBuffer + is allocated from boot services pool + memory and contains the new section + stream. The caller is responsible for + freeing this buffer. + + @param OutputSize A pointer to a caller-allocated UINTN in + which the size of OutputBuffer allocation + is stored. If the function returns + anything other than EFI_SUCCESS, the value + of OutputSize is undefined. + + @param AuthenticationStatus A pointer to a caller-allocated + UINT32 that indicates the + authentication status of the + output buffer. If the input + section's + GuidedSectionHeader.Attributes + field has the + EFI_GUIDED_SECTION_AUTH_STATUS_VAL + bit as clear, AuthenticationStatus + must return zero. Both local bits + (19:16) and aggregate bits (3:0) + in AuthenticationStatus are + returned by ExtractSection(). + These bits reflect the status of + the extraction operation. The bit + pattern in both regions must be + the same, as the local and + aggregate authentication statuses + have equivalent meaning at this + level. If the function returns + anything other than EFI_SUCCESS, + the value of AuthenticationStatus + is undefined. + + + @retval EFI_SUCCESS The InputSection was successfully + processed and the section contents were + returned. + + @retval EFI_OUT_OF_RESOURCES The system has insufficient + resources to process the + request. + + @retval EFI_INVALID_PARAMETER The GUID in InputSection does + not match this instance of the + GUIDed Section Extraction + Protocol. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_EXTRACT_GUIDED_SECTION)( + IN CONST EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL *This, + IN CONST VOID *InputSection, + OUT VOID **OutputBuffer, + OUT UINTN *OutputSize, + OUT UINT32 *AuthenticationStatus +); + + +/** + + Takes the GUIDed section as input and produces the section + stream data. See the ExtractSection() function description. + +**/ +struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL { + EFI_EXTRACT_GUIDED_SECTION ExtractSection; +}; + +// +// Protocol GUID definition. Each GUIDed section extraction protocol has the +// same interface but with different GUID. All the GUIDs is defined here. +// May add multiple GUIDs here. +// +#define EFI_CRC32_GUIDED_SECTION_EXTRACTION_PROTOCOL_GUID \ + { \ + 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } \ + } + +// +// may add other GUID here +// +extern EFI_GUID gEfiCrc32GuidedSectionExtractionProtocolGuid; + +#endif diff --git a/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/HiiFramework.h b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/HiiFramework.h new file mode 100644 index 00000000..5cf78739 --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/HiiFramework.h @@ -0,0 +1,944 @@ +/** @file + This file defines the Human Interface Infrastructure protocol which will + be used by resources which want to publish IFR/Font/String data and have it + collected by the Configuration engine. + + @par Revision Reference: + This protocol is defined in HII spec 0.92. + + Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR> + + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef _FRAMEWORK_HII_H_ +#define _FRAMEWORK_HII_H_ + +//#include <PiDxe.h> + +// +// To get EFI_GRAPHICS_OUTPUT_BLT_PIXEL, +// is defined in MdePkg/Protocol/GraphicsOutput.h +// +#include <Protocol/GraphicsOutput.h> + +#define EFI_HII_PROTOCOL_GUID \ + { \ + 0xd7ad636e, 0xb997, 0x459b, {0xbf, 0x3f, 0x88, 0x46, 0x89, 0x79, 0x80, 0xe1} \ + } + +// BugBug: +//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +// If UGA goes away we need to put this some place. I'm not sure where? +// +//typedef struct { +// UINT8 Blue; +// UINT8 Green; +// UINT8 Red; +// UINT8 Reserved; +//} EFI_UGA_PIXEL; + +//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +// + +typedef struct _EFI_HII_PROTOCOL EFI_HII_PROTOCOL; + +// +// Global definition +// +#define NARROW_CHAR 0xFFF0 +#define WIDE_CHAR 0xFFF1 +#define NON_BREAKING_CHAR 0xFFF2 +#define GLYPH_WIDTH 8 +#define GLYPH_HEIGHT 19 + +#define EFI_HII_FONT 1 +#define EFI_HII_STRING 2 +#define EFI_HII_IFR 3 +#define EFI_HII_KEYBOARD 4 +#define EFI_HII_HANDLES 5 +#define EFI_HII_VARIABLE 6 +#define EFI_HII_DEVICE_PATH 7 + + +// References to string tokens must use this macro to enable scanning for +// token usages. +// +#define STRING_TOKEN(t) t + +// +// The following types are currently defined: +// EFI_FROM_ID has been defined in UEFI spec. +// +typedef UINT16 EFI_FORM_LABEL; + +#pragma pack(1) + +typedef struct { + UINT32 Length; + UINT16 Type; +} EFI_HII_PACK_HEADER; + +// +// A form list consists of a large variety of structure +// possibilities so to represent the binary blob of data +// associated with a package of forms, we will assume a +// pointer to a self-describing data buffer. +// +typedef struct { + EFI_HII_PACK_HEADER Header; +} EFI_HII_IFR_PACK; + +typedef struct { + EFI_HII_PACK_HEADER Header; // Must be filled in + EFI_HANDLE ImageHandle; // Must be filled in + EFI_HANDLE DeviceHandle; // Optional + EFI_HANDLE ControllerHandle; // Optional + EFI_HANDLE CallbackHandle; // Optional + EFI_HANDLE COBExportHandle; // Optional +} EFI_HII_HANDLE_PACK; + +// +// ******************************************************** +// EFI_VARIABLE_CONTENTS +// ******************************************************** +// +typedef struct { + EFI_HII_PACK_HEADER Header; + EFI_GUID VariableGuid; + UINT32 VariableNameLength; + UINT16 VariableId; + // + // CHAR16 VariableName[]; //Null-terminated + // +} EFI_HII_VARIABLE_PACK; + +// +// ******************************************************** +// EFI_DEVICE_PATH_PACK +// ******************************************************** +// +typedef struct { + EFI_HII_PACK_HEADER Header; + // + // EFI_DEVICE_PATH DevicePath[]; + // +} EFI_HII_DEVICE_PATH_PACK; + +// +// ******************************************************** +// EFI_HII_DATA_TABLE +// ******************************************************** +// +typedef struct { + EFI_HII_HANDLE HiiHandle; + EFI_GUID PackageGuid; + UINT32 DataTableSize; + UINT32 IfrDataOffset; + UINT32 StringDataOffset; + UINT32 VariableDataOffset; + UINT32 DevicePathOffset; + UINT32 NumberOfVariableData; + UINT32 NumberOfLanguages; + // + // EFI_HII_DEVICE_PATH_PACK DevicePath[]; + // EFI_HII_VARIABLE_PACK VariableData[]; + // EFI_HII_IFR_PACK IfrData; + // EFI_HII_STRING_PACK StringData[]; + // +} EFI_HII_DATA_TABLE; + +// +// ******************************************************** +// EFI_HII_EXPORT_TABLE +// ******************************************************** +// +typedef struct { + UINT32 NumberOfHiiDataTables; + EFI_GUID Revision; + // + // EFI_HII_DATA_TABLE HiiDataTable[]; + // +} EFI_HII_EXPORT_TABLE; + +typedef struct { + BOOLEAN FormSetUpdate; // If TRUE, next variable is significant + EFI_PHYSICAL_ADDRESS FormCallbackHandle; // If not 0, will update Formset with this info + BOOLEAN FormUpdate; // If TRUE, next variable is significant + UINT16 FormValue; // specify which form is to be updated if FormUpdate value is TRUE. + STRING_REF FormTitle; // If not 0, will update Form with this info + UINT16 DataCount; // The number of Data entries in this structure + UINT8 *Data; // An array of 1+ op-codes, specified by DataCount +} EFI_HII_UPDATE_DATA; + +// +// String attributes +// +#define LANG_RIGHT_TO_LEFT 0x00000001 + +// +// A string package is used to localize strings to a particular +// language. The package is associated with a particular driver +// or set of drivers. Tools are used to associate tokens with +// string references in forms and in programs. These tokens are +// language agnostic. When paired with a language pack (directly +// or indirectly), the string token resolves into an actual +// UNICODE string. The NumStringPointers determines how many +// StringPointers (offset values) there are as well as the total +// number of Strings that are defined. +// +typedef struct { + EFI_HII_PACK_HEADER Header; + RELOFST LanguageNameString; + RELOFST PrintableLanguageName; + UINT32 NumStringPointers; + UINT32 Attributes; + // + // RELOFST StringPointers[]; + // EFI_STRING Strings[]; + // +} EFI_HII_STRING_PACK; + +// +// Glyph Attributes +// +#define EFI_GLYPH_NON_SPACING 1 +#define EFI_GLYPH_WIDE 2 + +typedef struct { + CHAR16 UnicodeWeight; + UINT8 Attributes; + UINT8 GlyphCol1[GLYPH_HEIGHT]; +} EFI_NARROW_GLYPH; + +typedef struct { + CHAR16 UnicodeWeight; + UINT8 Attributes; + UINT8 GlyphCol1[GLYPH_HEIGHT]; + UINT8 GlyphCol2[GLYPH_HEIGHT]; + UINT8 Pad[3]; +} EFI_WIDE_GLYPH; + +// +// A font list consists of a font header followed by a series +// of glyph structures. Note that fonts are not language specific. +// +typedef struct { + EFI_HII_PACK_HEADER Header; + UINT16 NumberOfNarrowGlyphs; + UINT16 NumberOfWideGlyphs; +} EFI_HII_FONT_PACK; + +// +// The IfrData in the EFI_HII_IFR_PACK structure definition +// is variable length, and not really part of the header. To +// simplify from code the size of the header, define an +// identical structure that does not include the IfrData field. +// Then use sizeof() this new structure to determine the +// actual size of the header. +// +typedef struct { + EFI_HII_PACK_HEADER Header; +} EFI_HII_IFR_PACK_HEADER; + +// +// pedef EFI_HII_PACK_HEADER EFI_HII_IFR_PACK_HEADER; +// +typedef enum { + EfiKeyLCtrl, + EfiKeyA0, + EfiKeyLAlt, + EfiKeySpaceBar, + EfiKeyA2, + EfiKeyA3, + EfiKeyA4, + EfiKeyRCtrl, + EfiKeyLeftArrow, + EfiKeyDownArrow, + EfiKeyRightArrow, + EfiKeyZero, + EfiKeyPeriod, + EfiKeyEnter, + EfiKeyLShift, + EfiKeyB0, + EfiKeyB1, + EfiKeyB2, + EfiKeyB3, + EfiKeyB4, + EfiKeyB5, + EfiKeyB6, + EfiKeyB7, + EfiKeyB8, + EfiKeyB9, + EfiKeyB10, + EfiKeyRshift, + EfiKeyUpArrow, + EfiKeyOne, + EfiKeyTwo, + EfiKeyThree, + EfiKeyCapsLock, + EfiKeyC1, + EfiKeyC2, + EfiKeyC3, + EfiKeyC4, + EfiKeyC5, + EfiKeyC6, + EfiKeyC7, + EfiKeyC8, + EfiKeyC9, + EfiKeyC10, + EfiKeyC11, + EfiKeyC12, + EfiKeyFour, + EfiKeyFive, + EfiKeySix, + EfiKeyPlus, + EfiKeyTab, + EfiKeyD1, + EfiKeyD2, + EfiKeyD3, + EfiKeyD4, + EfiKeyD5, + EfiKeyD6, + EfiKeyD7, + EfiKeyD8, + EfiKeyD9, + EfiKeyD10, + EfiKeyD11, + EfiKeyD12, + EfiKeyD13, + EfiKeyDel, + EfiKeyEnd, + EfiKeyPgDn, + EfiKeySeven, + EfiKeyEight, + EfiKeyNine, + EfiKeyE0, + EfiKeyE1, + EfiKeyE2, + EfiKeyE3, + EfiKeyE4, + EfiKeyE5, + EfiKeyE6, + EfiKeyE7, + EfiKeyE8, + EfiKeyE9, + EfiKeyE10, + EfiKeyE11, + EfiKeyE12, + EfiKeyBackSpace, + EfiKeyIns, + EfiKeyHome, + EfiKeyPgUp, + EfiKeyNLck, + EfiKeySlash, + EfiKeyAsterisk, + EfiKeyMinus, + EfiKeyEsc, + EfiKeyF1, + EfiKeyF2, + EfiKeyF3, + EfiKeyF4, + EfiKeyF5, + EfiKeyF6, + EfiKeyF7, + EfiKeyF8, + EfiKeyF9, + EfiKeyF10, + EfiKeyF11, + EfiKeyF12, + EfiKeyPrint, + EfiKeySLck, + EfiKeyPause +} EFI_KEY; + +typedef struct { + EFI_KEY Key; + CHAR16 Unicode; + CHAR16 ShiftedUnicode; + CHAR16 AltGrUnicode; + CHAR16 ShiftedAltGrUnicode; + UINT16 Modifier; +} EFI_KEY_DESCRIPTOR; + +// +// This structure allows a sparse set of keys to be redefined +// or a complete redefinition of the keyboard layout. Most +// keyboards have a lot of commonality in their layouts, therefore +// only defining those keys that need to change from the default +// minimizes the passed in information. +// +// Additionally, when an update occurs, the active keyboard layout +// will be switched to the newly updated keyboard layout. This +// allows for situations that when a keyboard layout driver is +// loaded as part of system initialization, the system will default +// the keyboard behavior to the new layout. +// +// Each call to update the keyboard mapping should contain the +// complete set of key descriptors to be updated, since every +// call to the HII which contains an EFI_HII_KEYBOARD_PACK will +// wipe the previous set of overrides. A call to +// +typedef struct { + EFI_HII_PACK_HEADER Header; + EFI_KEY_DESCRIPTOR *Descriptor; + UINT8 DescriptorCount; +} EFI_HII_KEYBOARD_PACK; + +// +// The EFI_HII_PACKAGES can contain different types of packages just +// after the structure as inline data. +// +typedef struct { + UINTN NumberOfPackages; + EFI_GUID *GuidId; + // + // EFI_HII_HANDLE_PACK *HandlePack; // Only one pack. + // EFI_HII_IFR_PACK *IfrPack; // Only one pack. + // EFI_HII_FONT_PACK *FontPack[]; // Multiple packs ok + // EFI_HII_STRING_PACK *StringPack[]; // Multiple packs ok + // EFI_HII_KEYBOARD_PACK *KeyboardPack[]; // Multiple packs ok + // +} EFI_HII_PACKAGES; + +typedef struct _EFI_HII_VARIABLE_PACK_LIST { + struct _EFI_HII_VARIABLE_PACK_LIST *NextVariablePack; + EFI_HII_VARIABLE_PACK *VariablePack; +} EFI_HII_VARIABLE_PACK_LIST; + + +#pragma pack() + +/** + Registers the various packs that are passed in via the Packages parameter. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Packages A pointer to an EFI_HII_PACKAGES package instance. + @param Handle A pointer to the EFI_HII_HANDLE instance. + + @retval EFI_SUCCESS Data was extracted from Packages, the database + was updated with the data, and Handle returned successfully. + @retval EFI_INVALID_PARAMETER The content of Packages was invalid. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_NEW_PACK) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_PACKAGES *Packages, + OUT EFI_HII_HANDLE *Handle + ); + +/** + Removes a package from the HII database. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle The handle that was registered to the data that is requested + for removal. + + @retval EFI_SUCCESS The data associated with the Handle was removed + from the HII database. + @retval EFI_INVALID_PARAMETER The Handle was not valid. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_REMOVE_PACK) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle + ); + +/** + Determines the handles that are currently active in the database. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param HandleBufferLength On input, a pointer to the length of the handle + buffer. On output, the length of the handle buffer that is required + for the handles found. + @param Handle An array of EFI_HII_HANDLE instances returned. + + @retval EFI_SUCCESS Handle was updated successfully. + @retval EFI_BUFFER_TOO_SMALL The HandleBufferLength parameter indicates + that Handle is too small to support the number of handles. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_FIND_HANDLES) ( + IN EFI_HII_PROTOCOL *This, + IN OUT UINT16 *HandleBufferLength, + OUT EFI_HII_HANDLE *Handle + ); + +/** + Exports the contents of the database into a buffer. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle An EFI_HII_HANDLE that corresponds to the desired + handle to export. If the value is 0, the entire database will be exported. + In either case, the data will be exported in a format described by the + structure definition of EFI_HII_EXPORT_TABLE. + @param BufferSize + On input, a pointer to the length of the buffer. On output, the length + of the buffer that is required for the export data. + @param Buffer A pointer to a buffer that will contain the results of the export function. + + @retval EFI_SUCCESS The buffer was successfully filled with BufferSize amount of data. + @retval EFI_BUFFER_TOO_SMALL The value in BufferSize was too small to contain the export data. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_EXPORT) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN OUT UINTN *BufferSize, + OUT VOID *Buffer + ); + +/** + Remove any new strings that were added after the initial string export + for this handle. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle The handle on which the string resides. + + @retval EFI_SUCCESS Remove strings from the handle successfully. + @retval EFI_INVALID_PARAMETER The Handle was unknown. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_RESET_STRINGS) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle + ); + +/** + Tests if all of the characters in a string have corresponding font characters. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param StringToTest A pointer to a Unicode string. + @param FirstMissing A pointer to an index into the string. On input, + the index of the first character in the StringToTest to examine. On exit, + the index of the first character encountered for which a glyph is unavailable. + If all glyphs in the string are available, the index is the index of the + terminator of the string. + @param GlyphBufferSize A pointer to a value. On output, if the function + returns EFI_SUCCESS, it contains the amount of memory that is required to + store the string's glyph equivalent. + + @retval EFI_SUCCESS All glyphs are available. Note that an empty string + always returns this value. + @retval EFI_NOT_FOUND A glyph was not found for a character. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_TEST_STRING) ( + IN EFI_HII_PROTOCOL *This, + IN CHAR16 *StringToTest, + IN OUT UINT32 *FirstMissing, + OUT UINT32 *GlyphBufferSize + ); + +/** + Translates a Unicode character into the corresponding font glyph. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Source A pointer to a Unicode string. + @param Index On input, the offset into the string from which to fetch + the character.On successful completion, the index is updated to the first + character past the character(s) making up the just extracted glyph. + @param GlyphBuffer Pointer to an array where the glyphs corresponding + to the characters in the source may be stored. GlyphBuffer is assumed + to be wide enough to accept a wide glyph character. + @param BitWidth If EFI_SUCCESS was returned, the UINT16 pointed to by + this value is filled with the length of the glyph in pixels. It is unchanged + if the call was unsuccessful. + @param InternalStatus The cell pointed to by this parameter must be + initialized to zero prior to invoking the call the first time for any string. + + @retval EFI_SUCCESS It worked. + @retval EFI_NOT_FOUND A glyph for a character was not found. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_GLYPH) ( + IN EFI_HII_PROTOCOL *This, + IN CHAR16 *Source, + IN OUT UINT16 *Index, + OUT UINT8 **GlyphBuffer, + OUT UINT16 *BitWidth, + IN OUT UINT32 *InternalStatus + ); + +/** + Translates a glyph into the format required for input to the Universal + Graphics Adapter (UGA) Block Transfer (BLT) routines. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param GlyphBuffer A pointer to the buffer that contains glyph data. + @param Foreground The foreground setting requested to be used for the + generated BltBuffer data. + @param Background The background setting requested to be used for the + generated BltBuffer data. + @param Count The entry in the BltBuffer upon which to act. + @param Width The width in bits of the glyph being converted. + @param Height The height in bits of the glyph being converted + @param BltBuffer A pointer to the buffer that contains the data that is + ready to be used by the UGA BLT routines. + + @retval EFI_SUCCESS It worked. + @retval EFI_NOT_FOUND A glyph for a character was not found. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GLYPH_TO_BLT) ( + IN EFI_HII_PROTOCOL *This, + IN UINT8 *GlyphBuffer, + IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground, + IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background, + IN UINTN Count, + IN UINTN Width, + IN UINTN Height, + IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer + ); + +/** + Allows a new string to be added to an already existing string package. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Pointer to a NULL-terminated string containing a single ISO 639-2 + language identifier, indicating the language in which the string is translated. + @param Handle The handle of the language pack to which the string is to be added. + @param Reference The identifier of the string to be added. If the reference + value is zero, then the string will be assigned a new identifier on that + handle for the language specified. Otherwise, the string will be updated + with the NewString Value. + @param NewString The string to be added. + + @retval EFI_SUCCESS The string was effectively registered. + @retval EFI_INVALID_PARAMETER The Handle was unknown. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_NEW_STRING) ( + IN EFI_HII_PROTOCOL *This, + IN CHAR16 *Language, + IN EFI_HII_HANDLE Handle, + IN OUT STRING_REF *Reference, + IN CHAR16 *NewString + ); + +/** + Allows a program to determine the primary languages that are supported + on a given handle. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle The handle on which the strings reside. + @param LanguageString A string allocated by GetPrimaryLanguages() that + contains a list of all primary languages registered on the handle. + + @retval EFI_SUCCESS LanguageString was correctly returned. + @retval EFI_INVALID_PARAMETER The Handle was unknown. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_PRI_LANGUAGES) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + OUT EFI_STRING *LanguageString + ); + +/** + Allows a program to determine which secondary languages are supported + on a given handle for a given primary language. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle The handle on which the strings reside. + @param PrimaryLanguage Pointer to a NULL-terminated string containing a single + ISO 639-2 language identifier, indicating the primary language. + @param LanguageString A string allocated by GetSecondaryLanguages() + containing a list of all secondary languages registered on the handle. + + @retval EFI_SUCCESS LanguageString was correctly returned. + @retval EFI_INVALID_PARAMETER The Handle was unknown. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_SEC_LANGUAGES) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN CHAR16 *PrimaryLanguage, + OUT EFI_STRING *LanguageString + ); + +/** + Extracts a string from a package already registered with the EFI HII database. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle The handle on which the string resides. + @param Token The string token assigned to the string. + @param Raw If TRUE, the string is returned unedited in the internal + storage format described above. If false, the string returned is edited + by replacing <cr> with <space> and by removing special characters such + as the <wide> prefix. + @param LanguageString Pointer to a NULL-terminated string containing a + single ISO 639-2 language identifier, indicating the language to print. + If the LanguageString is empty (starts with a NULL), the default system + language will be used to determine the language. + @param BufferLength Length of the StringBuffer. + @param StringBuffer The buffer designed to receive the characters in the string. + + @retval EFI_SUCCESS StringBuffer is filled with a NULL-terminated string. + @retval EFI_INVALID_PARAMETER The handle or string token is unknown. + @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough to + allow the entire string to be stored. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_STRING) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN STRING_REF Token, + IN BOOLEAN Raw, + IN CHAR16 *LanguageString, + IN OUT UINTN *BufferLength, + OUT EFI_STRING StringBuffer + ); + +/** + Allows a program to extract a part of a string of not more than a given width. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle The handle on which the string resides. + @param Token The string token assigned to the string. + @param Index On input, the offset into the string where the line is to start. + On output, the index is updated to point to beyond the last character returned + in the call. + @param LineWidth The maximum width of the line in units of narrow glyphs. + @param LanguageString Pointer to a NULL-terminated string containing a + single ISO 639-2 language identifier, indicating the language to print. + @param BufferLength Pointer to the length of the StringBuffer. + @param StringBuffer The buffer designed to receive the characters in the string. + + @retval EFI_SUCCESS StringBuffer filled with characters that will fit on the line. + @retval EFI_NOT_FOUND The font glyph for at least one of the characters in + the string is not in the font database. + @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough + to allow the entire string to be stored. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_LINE) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN STRING_REF Token, + IN OUT UINT16 *Index, + IN UINT16 LineWidth, + IN CHAR16 *LanguageString, + IN OUT UINT16 *BufferLength, + OUT EFI_STRING StringBuffer + ); + +/** + Allows a program to extract a form or form package that has previously + been registered with the HII database. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle Handle on which the form resides. + @param FormId The ID of the form to return. If the ID is zero, + the entire form package is returned. + @param BufferLength On input, the length of the Buffer. On output, + the length of the returned buffer, + @param Buffer The buffer designed to receive the form(s). + + @retval EFI_SUCCESS Buffer filled with the requested forms. BufferLength + was updated. + @retval EFI_INVALID_PARAMETER The handle is unknown. + @retval EFI_NOT_FOUND A form on the requested handle cannot be found with + the requested FormId. + @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough + to allow the form to be stored. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_FORMS) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN EFI_FORM_ID FormId, + IN OUT UINTN *BufferLength, + OUT UINT8 *Buffer + ); + +/** + Extracts the defaults that are associated with a given handle in the HII database. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle The HII handle from which will have default data retrieved. + @param DefaultMask The mask used to specify some type of default override when extracting + the default image data. + @param VariablePackList A indirect pointer to the first entry of a link list with + type EFI_HII_VARIABLE_PACK_LIST. + + @retval EFI_SUCCESS The VariablePackList was populated with the appropriate + default setting data. + @retval EFI_NOT_FOUND The IFR does not have any explicit or default map(s). + @retval EFI_INVALID_PARAMETER The HII database entry associated with Handle + contain invalid data. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_DEFAULT_IMAGE) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN UINTN DefaultMask, + OUT EFI_HII_VARIABLE_PACK_LIST **VariablePackList + ); + +/** + Allows the caller to update a form or form package that has previously been + registered with the EFI HII database. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param Handle Handle of the package where the form to be updated resides. + @param Label The label inside the form package where the update is to take place. + @param AddData If TRUE, adding data at a given Label; otherwise, + if FALSE, removing data at a given Label. + @param Data The buffer containing the new tags to insert after the Label + + @retval EFI_SUCCESS The form was updated with the new tags. + @retval EFI_INVALID_PARAMETER The buffer for the buffer length does not + contain an integral number of tags. + @retval EFI_NOT_FOUND The Handle, Label, or FormId was not found. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_UPDATE_FORM) ( + IN EFI_HII_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN EFI_FORM_LABEL Label, + IN BOOLEAN AddData, + IN EFI_HII_UPDATE_DATA *Data + ); + +/** + Retrieves the current keyboard layout. + + @param This A pointer to the EFI_HII_PROTOCOL instance. + @param DescriptorCount A pointer to the number of Descriptor entries being + described in the keyboard layout being retrieved. + @param Descriptor A pointer to a buffer containing an array of EFI_KEY_DESCRIPTOR + entries. Each entry will reflect the definition of a specific physical key. + + @retval EFI_SUCCESS The keyboard layout was retrieved successfully. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT) ( + IN EFI_HII_PROTOCOL *This, + OUT UINT16 *DescriptorCount, + OUT EFI_KEY_DESCRIPTOR *Descriptor + ); + +/** + @par Protocol Description: + The HII Protocol manages the HII database, which is a repository for data + having to do with fonts, strings, forms, keyboards, and other future human + interface items. + + @param NewPack + Extracts the various packs from a package list. + + @param RemovePack + Removes a package from the HII database. + + @param FindHandles + Determines the handles that are currently active in the database. + + @param ExportDatabase + Export the entire contents of the database to a buffer. + + @param TestString + Tests if all of the characters in a string have corresponding font characters. + + @param GetGlyph + Translates a Unicode character into the corresponding font glyph. + + @param GlyphToBlt + Converts a glyph value into a format that is ready for a UGA BLT command. + + @param NewString + Allows a new string to be added to an already existing string package. + + @param GetPrimaryLanguages + Allows a program to determine the primary languages that are supported + on a given handle. + + @param GetSecondaryLanguages + Allows a program to determine which secondary languages are supported + on a given handle for a given primary language. + + @param GetString + Extracts a string from a package that is already registered with the + EFI HII database. + + @param ResetString + Remove any new strings that were added after the initial string export + for this handle. + + @param GetLine + Allows a program to extract a part of a string of not more than a given width. + + @param GetForms + Allows a program to extract a form or form package that has been previously registered. + + @param GetDefaultImage + Allows a program to extract the nonvolatile image that represents the default storage image. + + @param UpdateForm + Allows a program to update a previously registered form. + + @param GetKeyboardLayout + Allows a program to extract the current keyboard layout. + +**/ +struct _EFI_HII_PROTOCOL { + EFI_HII_NEW_PACK NewPack; + EFI_HII_REMOVE_PACK RemovePack; + EFI_HII_FIND_HANDLES FindHandles; + EFI_HII_EXPORT ExportDatabase; + + EFI_HII_TEST_STRING TestString; + EFI_HII_GET_GLYPH GetGlyph; + EFI_HII_GLYPH_TO_BLT GlyphToBlt; + + EFI_HII_NEW_STRING NewString; + EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages; + EFI_HII_GET_SEC_LANGUAGES GetSecondaryLanguages; + EFI_HII_GET_STRING GetString; + EFI_HII_RESET_STRINGS ResetStrings; + EFI_HII_GET_LINE GetLine; + EFI_HII_GET_FORMS GetForms; + EFI_HII_GET_DEFAULT_IMAGE GetDefaultImage; + EFI_HII_UPDATE_FORM UpdateForm; + + EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout; +}; + +extern EFI_GUID gEfiHiiProtocolGuid; + +#endif diff --git a/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/UgaDraw.h b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/UgaDraw.h new file mode 100644 index 00000000..6c58660e --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/BaseTools/Source/C/Include/Protocol/UgaDraw.h @@ -0,0 +1,161 @@ +/** @file + UGA Draw protocol from the EFI 1.1 specification. + + Abstraction of a very simple graphics device. + + Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> + + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __UGA_DRAW_H__ +#define __UGA_DRAW_H__ + +#define EFI_UGA_DRAW_PROTOCOL_GUID \ + { \ + 0x982c298b, 0xf4fa, 0x41cb, {0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 } \ + } + +typedef struct _EFI_UGA_DRAW_PROTOCOL EFI_UGA_DRAW_PROTOCOL; + +/** + Return the current video mode information. + + @param This Protocol instance pointer. + @param HorizontalResolution Current video horizontal resolution in pixels + @param VerticalResolution Current video vertical resolution in pixels + @param ColorDepth Current video color depth in bits per pixel + @param RefreshRate Current video refresh rate in Hz. + + @retval EFI_SUCCESS Mode information returned. + @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode () + @retval EFI_INVALID_PARAMETER One of the input args was NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UGA_DRAW_PROTOCOL_GET_MODE) ( + IN EFI_UGA_DRAW_PROTOCOL *This, + OUT UINT32 *HorizontalResolution, + OUT UINT32 *VerticalResolution, + OUT UINT32 *ColorDepth, + OUT UINT32 *RefreshRate + ) +; + +/** + Return the current video mode information. + + @param This Protocol instance pointer. + @param HorizontalResolution Current video horizontal resolution in pixels + @param VerticalResolution Current video vertical resolution in pixels + @param ColorDepth Current video color depth in bits per pixel + @param RefreshRate Current video refresh rate in Hz. + + @retval EFI_SUCCESS Mode information returned. + @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode () + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_UGA_DRAW_PROTOCOL_SET_MODE) ( + IN EFI_UGA_DRAW_PROTOCOL *This, + IN UINT32 HorizontalResolution, + IN UINT32 VerticalResolution, + IN UINT32 ColorDepth, + IN UINT32 RefreshRate + ) +; + +typedef struct { + UINT8 Blue; + UINT8 Green; + UINT8 Red; + UINT8 Reserved; +} EFI_UGA_PIXEL; + +typedef union { + EFI_UGA_PIXEL Pixel; + UINT32 Raw; +} EFI_UGA_PIXEL_UNION; + +typedef enum { + EfiUgaVideoFill, + EfiUgaVideoToBltBuffer, + EfiUgaBltBufferToVideo, + EfiUgaVideoToVideo, + EfiUgaBltMax +} EFI_UGA_BLT_OPERATION; + +/** + Type specifying a pointer to a function to perform an UGA Blt operation. + + The following table defines actions for BltOperations: + + <B>EfiUgaVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY) + directly to every pixel of the video display rectangle + (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height). + Only one pixel will be used from the BltBuffer. Delta is NOT used. + + <B>EfiUgaVideoToBltBuffer</B> - Read data from the video display rectangle + (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in + the BltBuffer rectangle (DestinationX, DestinationY ) + (DestinationX + Width, DestinationY + Height). If DestinationX or + DestinationY is not zero then Delta must be set to the length in bytes + of a row in the BltBuffer. + + <B>EfiUgaBltBufferToVideo</B> - Write data from the BltBuffer rectangle + (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the + video display rectangle (DestinationX, DestinationY) + (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is + not zero then Delta must be set to the length in bytes of a row in the + BltBuffer. + + <B>EfiUgaVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY) + (SourceX + Width, SourceY + Height) .to the video display rectangle + (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height). + The BltBuffer and Delta are not used in this mode. + + + @param[in] This - Protocol instance pointer. + @param[in] BltBuffer - Buffer containing data to blit into video buffer. This + buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL) + @param[in] BltOperation - Operation to perform on BlitBuffer and video memory + @param[in] SourceX - X coordinate of source for the BltBuffer. + @param[in] SourceY - Y coordinate of source for the BltBuffer. + @param[in] DestinationX - X coordinate of destination for the BltBuffer. + @param[in] DestinationY - Y coordinate of destination for the BltBuffer. + @param[in] Width - Width of rectangle in BltBuffer in pixels. + @param[in] Height - Height of rectangle in BltBuffer in pixels. + @param[in] Delta - OPTIONAL + + @retval EFI_SUCCESS - The Blt operation completed. + @retval EFI_INVALID_PARAMETER - BltOperation is not valid. + @retval EFI_DEVICE_ERROR - A hardware error occurred writing to the video buffer. + +--*/ +typedef +EFI_STATUS +(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT) ( + IN EFI_UGA_DRAW_PROTOCOL * This, + IN EFI_UGA_PIXEL * BltBuffer, OPTIONAL + IN EFI_UGA_BLT_OPERATION BltOperation, + IN UINTN SourceX, + IN UINTN SourceY, + IN UINTN DestinationX, + IN UINTN DestinationY, + IN UINTN Width, + IN UINTN Height, + IN UINTN Delta OPTIONAL + ); + +struct _EFI_UGA_DRAW_PROTOCOL { + EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode; + EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode; + EFI_UGA_DRAW_PROTOCOL_BLT Blt; +}; + +extern EFI_GUID gEfiUgaDrawProtocolGuid; + +#endif |