diff options
Diffstat (limited to 'src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/UhciDxe/UsbHcMem.h')
-rw-r--r-- | src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/UhciDxe/UsbHcMem.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/UhciDxe/UsbHcMem.h b/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/UhciDxe/UsbHcMem.h new file mode 100644 index 00000000..1ddf9280 --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Pci/UhciDxe/UsbHcMem.h @@ -0,0 +1,155 @@ +/** @file + + This file contains the definination for host controller memory management routines + +Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR> +SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef _EFI_EHCI_MEM_H_ +#define _EFI_EHCI_MEM_H_ + +#define USB_HC_BIT(a) ((UINTN)(1 << (a))) + +#define USB_HC_BIT_IS_SET(Data, Bit) \ + ((BOOLEAN)(((Data) & USB_HC_BIT(Bit)) == USB_HC_BIT(Bit))) + +#define USB_HC_HIGH_32BIT(Addr64) \ + ((UINT32)(RShiftU64((UINTN)(Addr64), 32) & 0XFFFFFFFF)) + + +typedef struct _USBHC_MEM_BLOCK USBHC_MEM_BLOCK; +struct _USBHC_MEM_BLOCK { + UINT8 *Bits; // Bit array to record which unit is allocated + UINTN BitsLen; + UINT8 *Buf; + UINT8 *BufHost; + UINTN BufLen; // Memory size in bytes + VOID *Mapping; + USBHC_MEM_BLOCK *Next; +}; + +// +// USBHC_MEM_POOL is used to manage the memory used by USB +// host controller. EHCI requires the control memory and transfer +// data to be on the same 4G memory. +// +typedef struct _USBHC_MEM_POOL { + EFI_PCI_IO_PROTOCOL *PciIo; + BOOLEAN Check4G; + UINT32 Which4G; + USBHC_MEM_BLOCK *Head; +} USBHC_MEM_POOL; + +// +// Memory allocation unit, must be 2^n, n>4 +// +#define USBHC_MEM_UNIT 64 + +#define USBHC_MEM_UNIT_MASK (USBHC_MEM_UNIT - 1) +#define USBHC_MEM_DEFAULT_PAGES 16 + +#define USBHC_MEM_ROUND(Len) (((Len) + USBHC_MEM_UNIT_MASK) & (~USBHC_MEM_UNIT_MASK)) + +// +// Advance the byte and bit to the next bit, adjust byte accordingly. +// +#define NEXT_BIT(Byte, Bit) \ + do { \ + (Bit)++; \ + if ((Bit) > 7) { \ + (Byte)++; \ + (Bit) = 0; \ + } \ + } while (0) + + +/** + Initialize the memory management pool for the host controller. + + @param PciIo The PciIo that can be used to access the host controller. + @param Check4G Whether the host controller requires allocated memory + from one 4G address space. + @param Which4G The 4G memory area each memory allocated should be from. + + @retval EFI_SUCCESS The memory pool is initialized. + @retval EFI_OUT_OF_RESOURCE Fail to init the memory pool. + +**/ +USBHC_MEM_POOL * +UsbHcInitMemPool ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN BOOLEAN Check4G, + IN UINT32 Which4G + ); + + +/** + Release the memory management pool. + + @param Pool The USB memory pool to free. + + @return EFI_SUCCESS The memory pool is freed. + @return EFI_DEVICE_ERROR Failed to free the memory pool. + +**/ +EFI_STATUS +UsbHcFreeMemPool ( + IN USBHC_MEM_POOL *Pool + ); + + + +/** + Allocate some memory from the host controller's memory pool + which can be used to communicate with host controller. + + @param Pool The host controller's memory pool. + @param Size Size of the memory to allocate. + + @return The allocated memory or NULL. + +**/ +VOID * +UsbHcAllocateMem ( + IN USBHC_MEM_POOL *Pool, + IN UINTN Size + ); + + + +/** + Free the allocated memory back to the memory pool. + + @param Pool The memory pool of the host controller. + @param Mem The memory to free. + @param Size The size of the memory to free. + + @return None. + +**/ +VOID +UsbHcFreeMem ( + IN USBHC_MEM_POOL *Pool, + IN VOID *Mem, + IN UINTN Size + ); + +/** + Calculate the corresponding pci bus address according to the Mem parameter. + + @param Pool The memory pool of the host controller. + @param Mem The pointer to host memory. + @param Size The size of the memory region. + + @return the pci memory address +**/ +EFI_PHYSICAL_ADDRESS +UsbHcGetPciAddressForHostMem ( + IN USBHC_MEM_POOL *Pool, + IN VOID *Mem, + IN UINTN Size + ); + +#endif |