diff options
Diffstat (limited to 'src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h')
| -rw-r--r-- | src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h | 497 |
1 files changed, 497 insertions, 0 deletions
diff --git a/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h b/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h new file mode 100644 index 00000000..f77598af --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h @@ -0,0 +1,497 @@ +/** @file + Header file for EmmcDxe Driver. + + This file defines common data structures, macro definitions and some module + internal function header files. + + Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef _EMMC_BLOCK_IO_H_ +#define _EMMC_BLOCK_IO_H_ + +/** + Reset the Block Device. + + @param This Indicates a pointer to the calling context. + @param ExtendedVerification Driver may perform diagnostics on reset. + + @retval EFI_SUCCESS The device was reset. + @retval EFI_DEVICE_ERROR The device is not functioning properly and could + not be reset. + +**/ +EFI_STATUS +EFIAPI +EmmcReset ( + IN EFI_BLOCK_IO_PROTOCOL *This, + IN BOOLEAN ExtendedVerification + ); + +/** + Read BufferSize bytes from Lba into Buffer. + + @param This Indicates a pointer to the calling context. + @param MediaId Id of the media, changes every time the media is replaced. + @param Lba The starting Logical Block Address to read from + @param BufferSize Size of Buffer, must be a multiple of device block size. + @param Buffer A pointer to the destination buffer for the data. The caller is + responsible for either having implicit or explicit ownership of the buffer. + + @retval EFI_SUCCESS The data was read correctly from the device. + @retval EFI_DEVICE_ERROR The device reported an error while performing the read. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId does not match the current device. + @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. + @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, + or the buffer is not on proper alignment. + +**/ +EFI_STATUS +EFIAPI +EmmcReadBlocks ( + IN EFI_BLOCK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN EFI_LBA Lba, + IN UINTN BufferSize, + OUT VOID *Buffer + ); + +/** + Write BufferSize bytes from Lba into Buffer. + + @param This Indicates a pointer to the calling context. + @param MediaId The media ID that the write request is for. + @param Lba The starting logical block address to be written. The caller is + responsible for writing to only legitimate locations. + @param BufferSize Size of Buffer, must be a multiple of device block size. + @param Buffer A pointer to the source buffer for the data. + + @retval EFI_SUCCESS The data was written correctly to the device. + @retval EFI_WRITE_PROTECTED The device can not be written to. + @retval EFI_DEVICE_ERROR The device reported an error while performing the write. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId does not match the current device. + @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. + @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, + or the buffer is not on proper alignment. + +**/ +EFI_STATUS +EFIAPI +EmmcWriteBlocks ( + IN EFI_BLOCK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN EFI_LBA Lba, + IN UINTN BufferSize, + IN VOID *Buffer + ); + +/** + Flush the Block Device. + + @param This Indicates a pointer to the calling context. + + @retval EFI_SUCCESS All outstanding data was written to the device + @retval EFI_DEVICE_ERROR The device reported an error while writing back the data + @retval EFI_NO_MEDIA There is no media in the device. + +**/ +EFI_STATUS +EFIAPI +EmmcFlushBlocks ( + IN EFI_BLOCK_IO_PROTOCOL *This + ); + +/** + Reset the Block Device. + + @param[in] This Indicates a pointer to the calling context. + @param[in] ExtendedVerification Driver may perform diagnostics on reset. + + @retval EFI_SUCCESS The device was reset. + @retval EFI_DEVICE_ERROR The device is not functioning properly and could + not be reset. + +**/ +EFI_STATUS +EFIAPI +EmmcResetEx ( + IN EFI_BLOCK_IO2_PROTOCOL *This, + IN BOOLEAN ExtendedVerification + ); + +/** + Read BufferSize bytes from Lba into Buffer. + + @param[in] This Indicates a pointer to the calling context. + @param[in] MediaId Id of the media, changes every time the media is replaced. + @param[in] Lba The starting Logical Block Address to read from. + @param[in, out] Token A pointer to the token associated with the transaction. + @param[in] BufferSize Size of Buffer, must be a multiple of device block size. + @param[out] Buffer A pointer to the destination buffer for the data. The caller is + responsible for either having implicit or explicit ownership of the buffer. + + @retval EFI_SUCCESS The read request was queued if Event is not NULL. + The data was read correctly from the device if + the Event is NULL. + @retval EFI_DEVICE_ERROR The device reported an error while performing + the read. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the + intrinsic block size of the device. + @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, + or the buffer is not on proper alignment. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack + of resources. + +**/ +EFI_STATUS +EFIAPI +EmmcReadBlocksEx ( + IN EFI_BLOCK_IO2_PROTOCOL *This, + IN UINT32 MediaId, + IN EFI_LBA Lba, + IN OUT EFI_BLOCK_IO2_TOKEN *Token, + IN UINTN BufferSize, + OUT VOID *Buffer + ); + +/** + Write BufferSize bytes from Lba into Buffer. + + @param[in] This Indicates a pointer to the calling context. + @param[in] MediaId The media ID that the write request is for. + @param[in] Lba The starting logical block address to be written. The + caller is responsible for writing to only legitimate + locations. + @param[in, out] Token A pointer to the token associated with the transaction. + @param[in] BufferSize Size of Buffer, must be a multiple of device block size. + @param[in] Buffer A pointer to the source buffer for the data. + + @retval EFI_SUCCESS The data was written correctly to the device. + @retval EFI_WRITE_PROTECTED The device can not be written to. + @retval EFI_DEVICE_ERROR The device reported an error while performing the write. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId does not match the current device. + @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. + @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, + or the buffer is not on proper alignment. + +**/ +EFI_STATUS +EFIAPI +EmmcWriteBlocksEx ( + IN EFI_BLOCK_IO2_PROTOCOL *This, + IN UINT32 MediaId, + IN EFI_LBA Lba, + IN OUT EFI_BLOCK_IO2_TOKEN *Token, + IN UINTN BufferSize, + IN VOID *Buffer + ); + +/** + Flush the Block Device. + + @param[in] This Indicates a pointer to the calling context. + @param[in, out] Token A pointer to the token associated with the transaction. + + @retval EFI_SUCCESS All outstanding data was written to the device + @retval EFI_DEVICE_ERROR The device reported an error while writing back the data + @retval EFI_NO_MEDIA There is no media in the device. + +**/ +EFI_STATUS +EFIAPI +EmmcFlushBlocksEx ( + IN EFI_BLOCK_IO2_PROTOCOL *This, + IN OUT EFI_BLOCK_IO2_TOKEN *Token + ); + +/** + Send a security protocol command to a device that receives data and/or the result + of one or more commands sent by SendData. + + The ReceiveData function sends a security protocol command to the given MediaId. + The security protocol command sent is defined by SecurityProtocolId and contains + the security protocol specific data SecurityProtocolSpecificData. The function + returns the data from the security protocol command in PayloadBuffer. + + For devices supporting the SCSI command set, the security protocol command is sent + using the SECURITY PROTOCOL IN command defined in SPC-4. + + For devices supporting the ATA command set, the security protocol command is sent + using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize + is non-zero. + + If the PayloadBufferSize is zero, the security protocol command is sent using the + Trusted Non-Data command defined in ATA8-ACS. + + If PayloadBufferSize is too small to store the available data from the security + protocol command, the function shall copy PayloadBufferSize bytes into the + PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL. + + If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero, + the function shall return EFI_INVALID_PARAMETER. + + If the given MediaId does not support security protocol commands, the function shall + return EFI_UNSUPPORTED. If there is no media in the device, the function returns + EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device, + the function returns EFI_MEDIA_CHANGED. + + If the security protocol fails to complete within the Timeout period, the function + shall return EFI_TIMEOUT. + + If the security protocol command completes without an error, the function shall + return EFI_SUCCESS. If the security protocol command completes with an error, the + function shall return EFI_DEVICE_ERROR. + + @param[in] This Indicates a pointer to the calling context. + @param[in] MediaId ID of the medium to receive data from. + @param[in] Timeout The timeout, in 100ns units, to use for the execution + of the security protocol command. A Timeout value of 0 + means that this function will wait indefinitely for the + security protocol command to execute. If Timeout is greater + than zero, then this function will return EFI_TIMEOUT + if the time required to execute the receive data command + is greater than Timeout. + @param[in] SecurityProtocolId The value of the "Security Protocol" parameter of + the security protocol command to be sent. + @param[in] SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter + of the security protocol command to be sent. + @param[in] PayloadBufferSize Size in bytes of the payload data buffer. + @param[out] PayloadBuffer A pointer to a destination buffer to store the security + protocol command specific payload data for the security + protocol command. The caller is responsible for having + either implicit or explicit ownership of the buffer. + @param[out] PayloadTransferSize A pointer to a buffer to store the size in bytes of the + data written to the payload data buffer. + @param[in] IsRead Indicates it is a read or write operation. + + @retval EFI_SUCCESS The security protocol command completed successfully. + @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available + data from the device. The PayloadBuffer contains the truncated data. + @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands. + @retval EFI_DEVICE_ERROR The security protocol command completed with an error. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and + PayloadBufferSize is non-zero. + @retval EFI_TIMEOUT A timeout occurred while waiting for the security + protocol command to execute. + +**/ +EFI_STATUS +EFIAPI +EmmcSecurityProtocolInOut ( + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Timeout, + IN UINT8 SecurityProtocolId, + IN UINT16 SecurityProtocolSpecificData, + IN UINTN PayloadBufferSize, + OUT VOID *PayloadBuffer, + OUT UINTN *PayloadTransferSize, + IN BOOLEAN IsRead + ); + +/** + Send a security protocol command to a device that receives data and/or the result + of one or more commands sent by SendData. + + The ReceiveData function sends a security protocol command to the given MediaId. + The security protocol command sent is defined by SecurityProtocolId and contains + the security protocol specific data SecurityProtocolSpecificData. The function + returns the data from the security protocol command in PayloadBuffer. + + For devices supporting the SCSI command set, the security protocol command is sent + using the SECURITY PROTOCOL IN command defined in SPC-4. + + For devices supporting the ATA command set, the security protocol command is sent + using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize + is non-zero. + + If the PayloadBufferSize is zero, the security protocol command is sent using the + Trusted Non-Data command defined in ATA8-ACS. + + If PayloadBufferSize is too small to store the available data from the security + protocol command, the function shall copy PayloadBufferSize bytes into the + PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL. + + If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero, + the function shall return EFI_INVALID_PARAMETER. + + If the given MediaId does not support security protocol commands, the function shall + return EFI_UNSUPPORTED. If there is no media in the device, the function returns + EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device, + the function returns EFI_MEDIA_CHANGED. + + If the security protocol fails to complete within the Timeout period, the function + shall return EFI_TIMEOUT. + + If the security protocol command completes without an error, the function shall + return EFI_SUCCESS. If the security protocol command completes with an error, the + function shall return EFI_DEVICE_ERROR. + + @param This Indicates a pointer to the calling context. + @param MediaId ID of the medium to receive data from. + @param Timeout The timeout, in 100ns units, to use for the execution + of the security protocol command. A Timeout value of 0 + means that this function will wait indefinitely for the + security protocol command to execute. If Timeout is greater + than zero, then this function will return EFI_TIMEOUT + if the time required to execute the receive data command + is greater than Timeout. + @param SecurityProtocolId The value of the "Security Protocol" parameter of + the security protocol command to be sent. + @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter + of the security protocol command to be sent. + @param PayloadBufferSize Size in bytes of the payload data buffer. + @param PayloadBuffer A pointer to a destination buffer to store the security + protocol command specific payload data for the security + protocol command. The caller is responsible for having + either implicit or explicit ownership of the buffer. + @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the + data written to the payload data buffer. + + @retval EFI_SUCCESS The security protocol command completed successfully. + @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available + data from the device. The PayloadBuffer contains the truncated data. + @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands. + @retval EFI_DEVICE_ERROR The security protocol command completed with an error. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and + PayloadBufferSize is non-zero. + @retval EFI_TIMEOUT A timeout occurred while waiting for the security + protocol command to execute. + +**/ +EFI_STATUS +EFIAPI +EmmcSecurityProtocolIn ( + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Timeout, + IN UINT8 SecurityProtocolId, + IN UINT16 SecurityProtocolSpecificData, + IN UINTN PayloadBufferSize, + OUT VOID *PayloadBuffer, + OUT UINTN *PayloadTransferSize + ); + +/** + Send a security protocol command to a device. + + The SendData function sends a security protocol command containing the payload + PayloadBuffer to the given MediaId. The security protocol command sent is + defined by SecurityProtocolId and contains the security protocol specific data + SecurityProtocolSpecificData. If the underlying protocol command requires a + specific padding for the command payload, the SendData function shall add padding + bytes to the command payload to satisfy the padding requirements. + + For devices supporting the SCSI command set, the security protocol command is sent + using the SECURITY PROTOCOL OUT command defined in SPC-4. + + For devices supporting the ATA command set, the security protocol command is sent + using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize + is non-zero. If the PayloadBufferSize is zero, the security protocol command is + sent using the Trusted Non-Data command defined in ATA8-ACS. + + If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall + return EFI_INVALID_PARAMETER. + + If the given MediaId does not support security protocol commands, the function + shall return EFI_UNSUPPORTED. If there is no media in the device, the function + returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the + device, the function returns EFI_MEDIA_CHANGED. + + If the security protocol fails to complete within the Timeout period, the function + shall return EFI_TIMEOUT. + + If the security protocol command completes without an error, the function shall return + EFI_SUCCESS. If the security protocol command completes with an error, the function + shall return EFI_DEVICE_ERROR. + + @param This Indicates a pointer to the calling context. + @param MediaId ID of the medium to receive data from. + @param Timeout The timeout, in 100ns units, to use for the execution + of the security protocol command. A Timeout value of 0 + means that this function will wait indefinitely for the + security protocol command to execute. If Timeout is greater + than zero, then this function will return EFI_TIMEOUT + if the time required to execute the receive data command + is greater than Timeout. + @param SecurityProtocolId The value of the "Security Protocol" parameter of + the security protocol command to be sent. + @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter + of the security protocol command to be sent. + @param PayloadBufferSize Size in bytes of the payload data buffer. + @param PayloadBuffer A pointer to a destination buffer to store the security + protocol command specific payload data for the security + protocol command. + + @retval EFI_SUCCESS The security protocol command completed successfully. + @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands. + @retval EFI_DEVICE_ERROR The security protocol command completed with an error. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero. + @retval EFI_TIMEOUT A timeout occurred while waiting for the security + protocol command to execute. + +**/ +EFI_STATUS +EFIAPI +EmmcSecurityProtocolOut ( + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Timeout, + IN UINT8 SecurityProtocolId, + IN UINT16 SecurityProtocolSpecificData, + IN UINTN PayloadBufferSize, + IN VOID *PayloadBuffer + ); + +/** + Erase a specified number of device blocks. + + @param[in] This Indicates a pointer to the calling context. + @param[in] MediaId The media ID that the erase request is for. + @param[in] Lba The starting logical block address to be + erased. The caller is responsible for erasing + only legitimate locations. + @param[in, out] Token A pointer to the token associated with the + transaction. + @param[in] Size The size in bytes to be erased. This must be + a multiple of the physical block size of the + device. + + @retval EFI_SUCCESS The erase request was queued if Event is not + NULL. The data was erased correctly to the + device if the Event is NULL.to the device. + @retval EFI_WRITE_PROTECTED The device cannot be erased due to write + protection. + @retval EFI_DEVICE_ERROR The device reported an error while attempting + to perform the erase operation. + @retval EFI_INVALID_PARAMETER The erase request contains LBAs that are not + valid. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + +**/ +EFI_STATUS +EFIAPI +EmmcEraseBlocks ( + IN EFI_ERASE_BLOCK_PROTOCOL *This, + IN UINT32 MediaId, + IN EFI_LBA Lba, + IN OUT EFI_ERASE_BLOCK_TOKEN *Token, + IN UINTN Size + ); + +#endif + |