diff options
Diffstat (limited to 'src/VBox/Devices/EFI/Firmware/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h')
-rw-r--r-- | src/VBox/Devices/EFI/Firmware/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h b/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h new file mode 100644 index 00000000..ea82a011 --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h @@ -0,0 +1,277 @@ +/** @file + + Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef _EDKII_STORAGE_SECURITY_COMMAND_PPI_H_ +#define _EDKII_STORAGE_SECURITY_COMMAND_PPI_H_ + +#include <Protocol/DevicePath.h> + +/// +/// Global ID for the EDKII_PEI_STORAGE_SECURITY_CMD_PPI. +/// +#define EDKII_PEI_STORAGE_SECURITY_CMD_PPI_GUID \ + { \ + 0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } \ + } + +// +// Forward declaration for the EDKII_PEI_STORAGE_SECURITY_CMD_PPI. +// +typedef struct _EDKII_PEI_STORAGE_SECURITY_CMD_PPI EDKII_PEI_STORAGE_SECURITY_CMD_PPI; + +// +// Revision The revision to which the Storage Security Command interface adheres. +// All future revisions must be backwards compatible. +// If a future version is not back wards compatible it is not the same GUID. +// +#define EDKII_STORAGE_SECURITY_PPI_REVISION 0x00010000 + + +/** + Gets the count of storage security devices that one specific driver detects. + + @param[in] This The PPI instance pointer. + @param[out] NumberofDevices The number of storage security devices discovered. + + @retval EFI_SUCCESS The operation performed successfully. + @retval EFI_INVALID_PARAMETER The parameters are invalid. + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_PEI_STORAGE_SECURITY_GET_NUMBER_DEVICES) ( + IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This, + OUT UINTN *NumberofDevices + ); + +/** + Gets the device path of a specific storage security device. + + @param[in] This The PPI instance pointer. + @param[in] DeviceIndex Specifies the storage security device to which + the function wants to talk. Because the driver + that implements Storage Security Command PPIs + will manage multiple storage devices, the PPIs + that want to talk to a single device must specify + the device index that was assigned during the + enumeration process. This index is a number from + one to NumberofDevices. + @param[out] DevicePathLength The length of the device path in bytes specified + by DevicePath. + @param[out] DevicePath The device path of storage security device. + This field re-uses EFI Device Path Protocol as + defined by Section 10.2 EFI Device Path Protocol + of UEFI 2.7 Specification. + + @retval EFI_SUCCESS The operation succeeds. + @retval EFI_INVALID_PARAMETER DevicePathLength or DevicePath is NULL. + @retval EFI_NOT_FOUND The specified storage security device not found. + @retval EFI_OUT_OF_RESOURCES The operation fails due to lack of resources. + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_PEI_STORAGE_SECURITY_GET_DEVICE_PATH) ( + IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This, + IN UINTN DeviceIndex, + OUT UINTN *DevicePathLength, + OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath + ); + +/** + Send a security protocol command to a device that receives data and/or the result + of one or more commands sent by SendData. + + The ReceiveData function sends a security protocol command to the given DeviceIndex. + The security protocol command sent is defined by SecurityProtocolId and contains + the security protocol specific data SecurityProtocolSpecificData. The function + returns the data from the security protocol command in PayloadBuffer. + + For devices supporting the SCSI command set, the security protocol command is sent + using the SECURITY PROTOCOL IN command defined in SPC-4. + + For devices supporting the ATA command set, the security protocol command is sent + using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize + is non-zero. + + If the PayloadBufferSize is zero, the security protocol command is sent using the + Trusted Non-Data command defined in ATA8-ACS. + + If PayloadBufferSize is too small to store the available data from the security + protocol command, the function shall copy PayloadBufferSize bytes into the + PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL. + + If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero, + the function shall return EFI_INVALID_PARAMETER. + + If the given DeviceIndex does not support security protocol commands, the function + shall return EFI_UNSUPPORTED. + + If the security protocol fails to complete within the Timeout period, the function + shall return EFI_TIMEOUT. + + If the security protocol command completes without an error, the function shall + return EFI_SUCCESS. If the security protocol command completes with an error, the + function shall return EFI_DEVICE_ERROR. + + @param[in] This The PPI instance pointer. + @param[in] DeviceIndex Specifies the storage security device to which the + function wants to talk. Because the driver that + implements Storage Security Command PPIs will manage + multiple storage devices, the PPIs that want to talk + to a single device must specify the device index + that was assigned during the enumeration process. + This index is a number from one to NumberofDevices. + @param[in] Timeout The timeout, in 100ns units, to use for the execution + of the security protocol command. A Timeout value + of 0 means that this function will wait indefinitely + for the security protocol command to execute. If + Timeout is greater than zero, then this function + will return EFI_TIMEOUT if the time required to + execute the receive data command is greater than + Timeout. + @param[in] SecurityProtocolId + The value of the "Security Protocol" parameter of + the security protocol command to be sent. + @param[in] SecurityProtocolSpecificData + The value of the "Security Protocol Specific" + parameter of the security protocol command to be + sent. + @param[in] PayloadBufferSize + Size in bytes of the payload data buffer. + @param[out] PayloadBuffer A pointer to a destination buffer to store the + security protocol command specific payload data + for the security protocol command. The caller is + responsible for having either implicit or explicit + ownership of the buffer. + @param[out] PayloadTransferSize + A pointer to a buffer to store the size in bytes + of the data written to the payload data buffer. + + @retval EFI_SUCCESS The security protocol command completed + successfully. + @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to + store the available data from the device. + The PayloadBuffer contains the truncated + data. + @retval EFI_UNSUPPORTED The given DeviceIndex does not support + security protocol commands. + @retval EFI_DEVICE_ERROR The security protocol command completed + with an error. + @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize + is NULL and PayloadBufferSize is non-zero. + @retval EFI_TIMEOUT A timeout occurred while waiting for the + security protocol command to execute. + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_PEI_STORAGE_SECURITY_RECEIVE_DATA) ( + IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This, + IN UINTN DeviceIndex, + IN UINT64 Timeout, + IN UINT8 SecurityProtocolId, + IN UINT16 SecurityProtocolSpecificData, + IN UINTN PayloadBufferSize, + OUT VOID *PayloadBuffer, + OUT UINTN *PayloadTransferSize + ); + +/** + Send a security protocol command to a device. + + The SendData function sends a security protocol command containing the payload + PayloadBuffer to the given DeviceIndex. The security protocol command sent is + defined by SecurityProtocolId and contains the security protocol specific data + SecurityProtocolSpecificData. If the underlying protocol command requires a + specific padding for the command payload, the SendData function shall add padding + bytes to the command payload to satisfy the padding requirements. + + For devices supporting the SCSI command set, the security protocol command is + sent using the SECURITY PROTOCOL OUT command defined in SPC-4. + + For devices supporting the ATA command set, the security protocol command is + sent using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize + is non-zero. If the PayloadBufferSize is zero, the security protocol command + is sent using the Trusted Non-Data command defined in ATA8-ACS. + + If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall + return EFI_INVALID_PARAMETER. + + If the given DeviceIndex does not support security protocol commands, the function + shall return EFI_UNSUPPORTED. + + If the security protocol fails to complete within the Timeout period, the function + shall return EFI_TIMEOUT. + + If the security protocol command completes without an error, the function shall + return EFI_SUCCESS. If the security protocol command completes with an error, + the functio shall return EFI_DEVICE_ERROR. + + @param[in] This The PPI instance pointer. + @param[in] DeviceIndex The ID of the device. + @param[in] Timeout The timeout, in 100ns units, to use for the execution + of the security protocol command. A Timeout value + of 0 means that this function will wait indefinitely + for the security protocol command to execute. If + Timeout is greater than zero, then this function + will return EFI_TIMEOUT if the time required to + execute the receive data command is greater than + Timeout. + @param[in] SecurityProtocolId + The value of the "Security Protocol" parameter of + the security protocol command to be sent. + @param[in] SecurityProtocolSpecificData + The value of the "Security Protocol Specific" + parameter of the security protocol command to be + sent. + @param[in] PayloadBufferSize Size in bytes of the payload data buffer. + @param[in] PayloadBuffer A pointer to a destination buffer to store the + security protocol command specific payload data + for the security protocol command. + + @retval EFI_SUCCESS The security protocol command completed successfully. + @retval EFI_UNSUPPORTED The given DeviceIndex does not support security + protocol commands. + @retval EFI_DEVICE_ERROR The security protocol command completed with + an error. + @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize + is non-zero. + @retval EFI_TIMEOUT A timeout occurred while waiting for the security + protocol command to execute. + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_PEI_STORAGE_SECURITY_SEND_DATA) ( + IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *This, + IN UINTN DeviceIndex, + IN UINT64 Timeout, + IN UINT8 SecurityProtocolId, + IN UINT16 SecurityProtocolSpecificData, + IN UINTN PayloadBufferSize, + IN VOID *PayloadBuffer + ); + +// +// EDKII_PEI_STORAGE_SECURITY_CMD_PPI contains a set of services to send security +// protocol commands to a mass storage device. Two types of security protocol +// commands are supported. SendData sends a command with data to a device. +// ReceiveData sends a command that receives data and/or the result of one or +// more commands sent by SendData. +// +struct _EDKII_PEI_STORAGE_SECURITY_CMD_PPI { + UINT64 Revision; + EDKII_PEI_STORAGE_SECURITY_GET_NUMBER_DEVICES GetNumberofDevices; + EDKII_PEI_STORAGE_SECURITY_GET_DEVICE_PATH GetDevicePath; + EDKII_PEI_STORAGE_SECURITY_RECEIVE_DATA ReceiveData; + EDKII_PEI_STORAGE_SECURITY_SEND_DATA SendData; +}; + +extern EFI_GUID gEdkiiPeiStorageSecurityCommandPpiGuid; + +#endif |