diff options
Diffstat (limited to '')
-rw-r--r-- | src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.c | 1214 | ||||
-rw-r--r-- | src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.conf | 33 |
2 files changed, 1247 insertions, 0 deletions
diff --git a/src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.c b/src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.c new file mode 100644 index 00000000..d4ca1d30 --- /dev/null +++ b/src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.c @@ -0,0 +1,1214 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License (the "License"). + * You may not use this file except in compliance with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ + +/* + * Copyright 2010 Sun Microsystems, Inc. All rights reserved. + * Use is subject to license terms. + */ + +#include <sys/errno.h> +#include <sys/cpuvar.h> +#include <sys/stat.h> +#include <sys/modctl.h> +#include <sys/cmn_err.h> +#include <sys/ddi.h> +#include <sys/sunddi.h> +#include <sys/ksynch.h> +#include <sys/conf.h> +#include <sys/kmem.h> +#include <sys/kcpc.h> +#include <sys/cap_util.h> +#include <sys/cpc_pcbe.h> +#include <sys/cpc_impl.h> +#include <sys/dtrace_impl.h> + +/* + * DTrace CPU Performance Counter Provider + * --------------------------------------- + * + * The DTrace cpc provider allows DTrace consumers to access the CPU + * performance counter overflow mechanism of a CPU. The configuration + * presented in a probe specification is programmed into the performance + * counter hardware of all available CPUs on a system. Programming the + * hardware causes a counter on each CPU to begin counting events of the + * given type. When the specified number of events have occurred, an overflow + * interrupt will be generated and the probe is fired. + * + * The required configuration for the performance counter is encoded into + * the probe specification and this includes the performance counter event + * name, processor mode, overflow rate and an optional unit mask. + * + * Most processors provide several counters (PICs) which can count all or a + * subset of the events available for a given CPU. However, when overflow + * profiling is being used, not all CPUs can detect which counter generated the + * overflow interrupt. In this case we cannot reliably determine which counter + * overflowed and we therefore only allow such CPUs to configure one event at + * a time. Processors that can determine the counter which overflowed are + * allowed to program as many events at one time as possible (in theory up to + * the number of instrumentation counters supported by that platform). + * Therefore, multiple consumers can enable multiple probes at the same time + * on such platforms. Platforms which cannot determine the source of an + * overflow interrupt are only allowed to program a single event at one time. + * + * The performance counter hardware is made available to consumers on a + * first-come, first-served basis. Only a finite amount of hardware resource + * is available and, while we make every attempt to accomodate requests from + * consumers, we must deny requests when hardware resources have been exhausted. + * A consumer will fail to enable probes when resources are currently in use. + * + * The cpc provider contends for shared hardware resources along with other + * consumers of the kernel CPU performance counter subsystem (e.g. cpustat(1M)). + * Only one such consumer can use the performance counters at any one time and + * counters are made available on a first-come, first-served basis. As with + * cpustat, the cpc provider has priority over per-LWP libcpc usage (e.g. + * cputrack(1)). Invoking the cpc provider will cause all existing per-LWP + * counter contexts to be invalidated. + */ + +typedef struct dcpc_probe { + char dcpc_event_name[CPC_MAX_EVENT_LEN]; + int dcpc_flag; /* flags (USER/SYS) */ + uint32_t dcpc_ovfval; /* overflow value */ + int64_t dcpc_umask; /* umask/emask for this event */ + int dcpc_picno; /* pic this event is programmed in */ + int dcpc_enabled; /* probe is actually enabled? */ + int dcpc_disabling; /* probe is currently being disabled */ + dtrace_id_t dcpc_id; /* probeid this request is enabling */ + int dcpc_actv_req_idx; /* idx into dcpc_actv_reqs[] */ +} dcpc_probe_t; + +static dev_info_t *dcpc_devi; +static dtrace_provider_id_t dcpc_pid; +static dcpc_probe_t **dcpc_actv_reqs; +static uint32_t dcpc_enablings = 0; +static int dcpc_ovf_mask = 0; +static int dcpc_mult_ovf_cap = 0; +static int dcpc_mask_type = 0; + +/* + * When the dcpc provider is loaded, dcpc_min_overflow is set to either + * DCPC_MIN_OVF_DEFAULT or the value that dcpc-min-overflow is set to in + * the dcpc.conf file. Decrease this value to set probes with smaller + * overflow values. Remember that very small values could render a system + * unusable with frequently occurring events. + */ +#define DCPC_MIN_OVF_DEFAULT 5000 +static uint32_t dcpc_min_overflow; + +static int dcpc_aframes = 0; /* override for artificial frame setting */ +#if defined(__x86) +#define DCPC_ARTIFICIAL_FRAMES 8 +#elif defined(__sparc) +#define DCPC_ARTIFICIAL_FRAMES 2 +#endif + +/* + * Called from the platform overflow interrupt handler. 'bitmap' is a mask + * which contains the pic(s) that have overflowed. + */ +static void +dcpc_fire(uint64_t bitmap) +{ + int i; + + /* + * No counter was marked as overflowing. Shout about it and get out. + */ + if ((bitmap & dcpc_ovf_mask) == 0) { + cmn_err(CE_NOTE, "dcpc_fire: no counter overflow found\n"); + return; + } + + /* + * This is the common case of a processor that doesn't support + * multiple overflow events. Such systems are only allowed a single + * enabling and therefore we just look for the first entry in + * the active request array. + */ + if (!dcpc_mult_ovf_cap) { + for (i = 0; i < cpc_ncounters; i++) { + if (dcpc_actv_reqs[i] != NULL) { + dtrace_probe(dcpc_actv_reqs[i]->dcpc_id, + CPU->cpu_cpcprofile_pc, + CPU->cpu_cpcprofile_upc, 0, 0, 0); + return; + } + } + return; + } + + /* + * This is a processor capable of handling multiple overflow events. + * Iterate over the array of active requests and locate the counters + * that overflowed (note: it is possible for more than one counter to + * have overflowed at the same time). + */ + for (i = 0; i < cpc_ncounters; i++) { + if (dcpc_actv_reqs[i] != NULL && + (bitmap & (1ULL << dcpc_actv_reqs[i]->dcpc_picno))) { + dtrace_probe(dcpc_actv_reqs[i]->dcpc_id, + CPU->cpu_cpcprofile_pc, + CPU->cpu_cpcprofile_upc, 0, 0, 0); + } + } +} + +static void +dcpc_create_probe(dtrace_provider_id_t id, const char *probename, + char *eventname, int64_t umask, uint32_t ovfval, char flag) +{ + dcpc_probe_t *pp; + int nr_frames = DCPC_ARTIFICIAL_FRAMES + dtrace_mach_aframes(); + + if (dcpc_aframes) + nr_frames = dcpc_aframes; + + if (dtrace_probe_lookup(id, NULL, NULL, probename) != 0) + return; + + pp = kmem_zalloc(sizeof (dcpc_probe_t), KM_SLEEP); + (void) strncpy(pp->dcpc_event_name, eventname, + sizeof (pp->dcpc_event_name) - 1); + pp->dcpc_event_name[sizeof (pp->dcpc_event_name) - 1] = '\0'; + pp->dcpc_flag = flag | CPC_OVF_NOTIFY_EMT; + pp->dcpc_ovfval = ovfval; + pp->dcpc_umask = umask; + pp->dcpc_actv_req_idx = pp->dcpc_picno = pp->dcpc_disabling = -1; + + pp->dcpc_id = dtrace_probe_create(id, NULL, NULL, probename, + nr_frames, pp); +} + +/*ARGSUSED*/ +static void +dcpc_provide(void *arg, const dtrace_probedesc_t *desc) +{ + /* + * The format of a probe is: + * + * event_name-mode-{optional_umask}-overflow_rate + * e.g. + * DC_refill_from_system-user-0x1e-50000, or, + * DC_refill_from_system-all-10000 + * + */ + char *str, *end, *p; + int i, flag = 0; + char event[CPC_MAX_EVENT_LEN]; + long umask = -1, val = 0; + size_t evlen, len; + + /* + * The 'cpc' provider offers no probes by default. + */ + if (desc == NULL) + return; + + len = strlen(desc->dtpd_name); + p = str = kmem_alloc(len + 1, KM_SLEEP); + (void) strcpy(str, desc->dtpd_name); + + /* + * We have a poor man's strtok() going on here. Replace any hyphens + * in the the probe name with NULL characters in order to make it + * easy to parse the string with regular string functions. + */ + for (i = 0; i < len; i++) { + if (str[i] == '-') + str[i] = '\0'; + } + + /* + * The first part of the string must be either a platform event + * name or a generic event name. + */ + evlen = strlen(p); + (void) strncpy(event, p, CPC_MAX_EVENT_LEN - 1); + event[CPC_MAX_EVENT_LEN - 1] = '\0'; + + /* + * The next part of the name is the mode specification. Valid + * settings are "user", "kernel" or "all". + */ + p += evlen + 1; + + if (strcmp(p, "user") == 0) + flag |= CPC_COUNT_USER; + else if (strcmp(p, "kernel") == 0) + flag |= CPC_COUNT_SYSTEM; + else if (strcmp(p, "all") == 0) + flag |= CPC_COUNT_USER | CPC_COUNT_SYSTEM; + else + goto err; + + /* + * Next we either have a mask specification followed by an overflow + * rate or just an overflow rate on its own. + */ + p += strlen(p) + 1; + if (p[0] == '0' && (p[1] == 'x' || p[1] == 'X')) { + /* + * A unit mask can only be specified if: + * 1) this performance counter back end supports masks. + * 2) the specified event is platform specific. + * 3) a valid hex number is converted. + * 4) no extraneous characters follow the mask specification. + */ + if (dcpc_mask_type != 0 && strncmp(event, "PAPI", 4) != 0 && + ddi_strtol(p, &end, 16, &umask) == 0 && + end == p + strlen(p)) { + p += strlen(p) + 1; + } else { + goto err; + } + } + + /* + * This final part must be an overflow value which has to be greater + * than the minimum permissible overflow rate. + */ + if ((ddi_strtol(p, &end, 10, &val) != 0) || end != p + strlen(p) || + val < dcpc_min_overflow) + goto err; + + /* + * Validate the event and create the probe. + */ + for (i = 0; i < cpc_ncounters; i++) { + char *events, *cp, *p, *end; + int found = 0, j; + size_t llen; + + if ((events = kcpc_list_events(i)) == NULL) + goto err; + + llen = strlen(events); + p = cp = ddi_strdup(events, KM_NOSLEEP); + end = cp + llen; + + for (j = 0; j < llen; j++) { + if (cp[j] == ',') + cp[j] = '\0'; + } + + while (p < end && found == 0) { + if (strcmp(p, event) == 0) { + dcpc_create_probe(dcpc_pid, desc->dtpd_name, + event, umask, (uint32_t)val, flag); + found = 1; + } + p += strlen(p) + 1; + } + kmem_free(cp, llen + 1); + + if (found) + break; + } + +err: + kmem_free(str, len + 1); +} + +/*ARGSUSED*/ +static void +dcpc_destroy(void *arg, dtrace_id_t id, void *parg) +{ + dcpc_probe_t *pp = parg; + + ASSERT(pp->dcpc_enabled == 0); + kmem_free(pp, sizeof (dcpc_probe_t)); +} + +/*ARGSUSED*/ +static int +dcpc_usermode(void *arg, dtrace_id_t id, void *parg) +{ + return (CPU->cpu_cpcprofile_pc == 0); +} + +static void +dcpc_populate_set(cpu_t *c, dcpc_probe_t *pp, kcpc_set_t *set, int reqno) +{ + kcpc_set_t *oset; + int i; + + (void) strncpy(set->ks_req[reqno].kr_event, pp->dcpc_event_name, + CPC_MAX_EVENT_LEN); + set->ks_req[reqno].kr_config = NULL; + set->ks_req[reqno].kr_index = reqno; + set->ks_req[reqno].kr_picnum = -1; + set->ks_req[reqno].kr_flags = pp->dcpc_flag; + + /* + * If a unit mask has been specified then detect which attribute + * the platform needs. For now, it's either "umask" or "emask". + */ + if (pp->dcpc_umask >= 0) { + set->ks_req[reqno].kr_attr = + kmem_zalloc(sizeof (kcpc_attr_t), KM_SLEEP); + set->ks_req[reqno].kr_nattrs = 1; + if (dcpc_mask_type & DCPC_UMASK) + (void) strncpy(set->ks_req[reqno].kr_attr->ka_name, + "umask", 5); + else + (void) strncpy(set->ks_req[reqno].kr_attr->ka_name, + "emask", 5); + set->ks_req[reqno].kr_attr->ka_val = pp->dcpc_umask; + } else { + set->ks_req[reqno].kr_attr = NULL; + set->ks_req[reqno].kr_nattrs = 0; + } + + /* + * If this probe is enabled, obtain its current countdown value + * and use that. The CPUs cpc context might not exist yet if we + * are dealing with a CPU that is just coming online. + */ + if (pp->dcpc_enabled && (c->cpu_cpc_ctx != NULL)) { + oset = c->cpu_cpc_ctx->kc_set; + + for (i = 0; i < oset->ks_nreqs; i++) { + if (strcmp(oset->ks_req[i].kr_event, + set->ks_req[reqno].kr_event) == 0) { + set->ks_req[reqno].kr_preset = + *(oset->ks_req[i].kr_data); + } + } + } else { + set->ks_req[reqno].kr_preset = UINT64_MAX - pp->dcpc_ovfval; + } + + set->ks_nreqs++; +} + + +/* + * Create a fresh request set for the enablings represented in the + * 'dcpc_actv_reqs' array which contains the probes we want to be + * in the set. This can be called for several reasons: + * + * 1) We are on a single or multi overflow platform and we have no + * current events so we can just create the set and initialize it. + * 2) We are on a multi-overflow platform and we already have one or + * more existing events and we are adding a new enabling. Create a + * new set and copy old requests in and then add the new request. + * 3) We are on a multi-overflow platform and we have just removed an + * enabling but we still have enablings whch are valid. Create a new + * set and copy in still valid requests. + */ +static kcpc_set_t * +dcpc_create_set(cpu_t *c) +{ + int i, reqno = 0; + int active_requests = 0; + kcpc_set_t *set; + + /* + * First get a count of the number of currently active requests. + * Note that dcpc_actv_reqs[] should always reflect which requests + * we want to be in the set that is to be created. It is the + * responsibility of the caller of dcpc_create_set() to adjust that + * array accordingly beforehand. + */ + for (i = 0; i < cpc_ncounters; i++) { + if (dcpc_actv_reqs[i] != NULL) + active_requests++; + } + + set = kmem_zalloc(sizeof (kcpc_set_t), KM_SLEEP); + + set->ks_req = + kmem_zalloc(sizeof (kcpc_request_t) * active_requests, KM_SLEEP); + + set->ks_data = + kmem_zalloc(active_requests * sizeof (uint64_t), KM_SLEEP); + + /* + * Look for valid entries in the active requests array and populate + * the request set for any entries found. + */ + for (i = 0; i < cpc_ncounters; i++) { + if (dcpc_actv_reqs[i] != NULL) { + dcpc_populate_set(c, dcpc_actv_reqs[i], set, reqno); + reqno++; + } + } + + return (set); +} + +static int +dcpc_program_cpu_event(cpu_t *c) +{ + int i, j, subcode; + kcpc_ctx_t *ctx, *octx; + kcpc_set_t *set; + + set = dcpc_create_set(c); + + set->ks_ctx = ctx = kcpc_ctx_alloc(KM_SLEEP); + ctx->kc_set = set; + ctx->kc_cpuid = c->cpu_id; + + if (kcpc_assign_reqs(set, ctx) != 0) + goto err; + + if (kcpc_configure_reqs(ctx, set, &subcode) != 0) + goto err; + + for (i = 0; i < set->ks_nreqs; i++) { + for (j = 0; j < cpc_ncounters; j++) { + if (dcpc_actv_reqs[j] != NULL && + strcmp(set->ks_req[i].kr_event, + dcpc_actv_reqs[j]->dcpc_event_name) == 0) { + dcpc_actv_reqs[j]->dcpc_picno = + set->ks_req[i].kr_picnum; + } + } + } + + /* + * If we already have an active enabling then save the current cpc + * context away. + */ + octx = c->cpu_cpc_ctx; + + kcpc_cpu_program(c, ctx); + + if (octx != NULL) { + kcpc_set_t *oset = octx->kc_set; + kmem_free(oset->ks_data, oset->ks_nreqs * sizeof (uint64_t)); + kcpc_free_configs(oset); + kcpc_free_set(oset); + kcpc_ctx_free(octx); + } + + return (0); + +err: + /* + * We failed to configure this request up so free things up and + * get out. + */ + kcpc_free_configs(set); + kmem_free(set->ks_data, set->ks_nreqs * sizeof (uint64_t)); + kcpc_free_set(set); + kcpc_ctx_free(ctx); + + return (-1); +} + +static void +dcpc_disable_cpu(cpu_t *c) +{ + kcpc_ctx_t *ctx; + kcpc_set_t *set; + + /* + * Leave this CPU alone if it's already offline. + */ + if (c->cpu_flags & CPU_OFFLINE) + return; + + /* + * Grab CPUs CPC context before kcpc_cpu_stop() stops counters and + * changes it. + */ + ctx = c->cpu_cpc_ctx; + + kcpc_cpu_stop(c, B_FALSE); + + set = ctx->kc_set; + + kcpc_free_configs(set); + kmem_free(set->ks_data, set->ks_nreqs * sizeof (uint64_t)); + kcpc_free_set(set); + kcpc_ctx_free(ctx); +} + +/* + * The dcpc_*_interrupts() routines are responsible for manipulating the + * per-CPU dcpc interrupt state byte. The purpose of the state byte is to + * synchronize processing of hardware overflow interrupts wth configuration + * changes made to the CPU performance counter subsystem by the dcpc provider. + * + * The dcpc provider claims ownership of the overflow interrupt mechanism + * by transitioning the state byte from DCPC_INTR_INACTIVE (indicating the + * dcpc provider is not in use) to DCPC_INTR_FREE (the dcpc provider owns the + * overflow mechanism and interrupts may be processed). Before modifying + * a CPUs configuration state the state byte is transitioned from + * DCPC_INTR_FREE to DCPC_INTR_CONFIG ("configuration in process" state). + * The hardware overflow handler, kcpc_hw_overflow_intr(), will only process + * an interrupt when a configuration is not in process (i.e. the state is + * marked as free). During interrupt processing the state is set to + * DCPC_INTR_PROCESSING by the overflow handler. When the last dcpc based + * enabling is removed, the state byte is set to DCPC_INTR_INACTIVE to indicate + * the dcpc provider is no longer interested in overflow interrupts. + */ +static void +dcpc_block_interrupts(void) +{ + cpu_t *c = cpu_list; + uint8_t *state; + + ASSERT(cpu_core[c->cpu_id].cpuc_dcpc_intr_state != DCPC_INTR_INACTIVE); + + do { + state = &cpu_core[c->cpu_id].cpuc_dcpc_intr_state; + + while (atomic_cas_8(state, DCPC_INTR_FREE, + DCPC_INTR_CONFIG) != DCPC_INTR_FREE) + continue; + + } while ((c = c->cpu_next) != cpu_list); +} + +/* + * Set all CPUs dcpc interrupt state to DCPC_INTR_FREE to indicate that + * overflow interrupts can be processed safely. + */ +static void +dcpc_release_interrupts(void) +{ + cpu_t *c = cpu_list; + + ASSERT(cpu_core[c->cpu_id].cpuc_dcpc_intr_state != DCPC_INTR_INACTIVE); + + do { + cpu_core[c->cpu_id].cpuc_dcpc_intr_state = DCPC_INTR_FREE; + membar_producer(); + } while ((c = c->cpu_next) != cpu_list); +} + +/* + * Transition all CPUs dcpc interrupt state from DCPC_INTR_INACTIVE to + * to DCPC_INTR_FREE. This indicates that the dcpc provider is now + * responsible for handling all overflow interrupt activity. Should only be + * called before enabling the first dcpc based probe. + */ +static void +dcpc_claim_interrupts(void) +{ + cpu_t *c = cpu_list; + + ASSERT(cpu_core[c->cpu_id].cpuc_dcpc_intr_state == DCPC_INTR_INACTIVE); + + do { + cpu_core[c->cpu_id].cpuc_dcpc_intr_state = DCPC_INTR_FREE; + membar_producer(); + } while ((c = c->cpu_next) != cpu_list); +} + +/* + * Set all CPUs dcpc interrupt state to DCPC_INTR_INACTIVE to indicate that + * the dcpc provider is no longer processing overflow interrupts. Only called + * during removal of the last dcpc based enabling. + */ +static void +dcpc_surrender_interrupts(void) +{ + cpu_t *c = cpu_list; + + ASSERT(cpu_core[c->cpu_id].cpuc_dcpc_intr_state != DCPC_INTR_INACTIVE); + + do { + cpu_core[c->cpu_id].cpuc_dcpc_intr_state = DCPC_INTR_INACTIVE; + membar_producer(); + } while ((c = c->cpu_next) != cpu_list); +} + +/* + * dcpc_program_event() can be called owing to a new enabling or if a multi + * overflow platform has disabled a request but needs to program the requests + * that are still valid. + * + * Every invocation of dcpc_program_event() will create a new kcpc_ctx_t + * and a new request set which contains the new enabling and any old enablings + * which are still valid (possible with multi-overflow platforms). + */ +static int +dcpc_program_event(dcpc_probe_t *pp) +{ + cpu_t *c; + int ret = 0; + + ASSERT(MUTEX_HELD(&cpu_lock)); + + kpreempt_disable(); + + dcpc_block_interrupts(); + + c = cpu_list; + + do { + /* + * Skip CPUs that are currently offline. + */ + if (c->cpu_flags & CPU_OFFLINE) + continue; + + /* + * Stop counters but preserve existing DTrace CPC context + * if there is one. + * + * If we come here when the first event is programmed for a CPU, + * there should be no DTrace CPC context installed. In this + * case, kcpc_cpu_stop() will ensure that there is no other + * context on the CPU. + * + * If we add new enabling to the original one, the CPU should + * have the old DTrace CPC context which we need to keep around + * since dcpc_program_event() will add to it. + */ + if (c->cpu_cpc_ctx != NULL) + kcpc_cpu_stop(c, B_TRUE); + } while ((c = c->cpu_next) != cpu_list); + + dcpc_release_interrupts(); + + /* + * If this enabling is being removed (in the case of a multi event + * capable system with more than one active enabling), we can now + * update the active request array to reflect the enablings that need + * to be reprogrammed. + */ + if (pp->dcpc_disabling == 1) + dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; + + do { + /* + * Skip CPUs that are currently offline. + */ + if (c->cpu_flags & CPU_OFFLINE) + continue; + + ret = dcpc_program_cpu_event(c); + } while ((c = c->cpu_next) != cpu_list && ret == 0); + + /* + * If dcpc_program_cpu_event() fails then it is because we couldn't + * configure the requests in the set for the CPU and not because of + * an error programming the hardware. If we have a failure here then + * we assume no CPUs have been programmed in the above step as they + * are all configured identically. + */ + if (ret != 0) { + pp->dcpc_enabled = 0; + kpreempt_enable(); + return (-1); + } + + if (pp->dcpc_disabling != 1) + pp->dcpc_enabled = 1; + + kpreempt_enable(); + + return (0); +} + +/*ARGSUSED*/ +static int +dcpc_enable(void *arg, dtrace_id_t id, void *parg) +{ + dcpc_probe_t *pp = parg; + int i, found = 0; + cpu_t *c; + + ASSERT(MUTEX_HELD(&cpu_lock)); + + /* + * Bail out if the counters are being used by a libcpc consumer. + */ + rw_enter(&kcpc_cpuctx_lock, RW_READER); + if (kcpc_cpuctx > 0) { + rw_exit(&kcpc_cpuctx_lock); + return (-1); + } + + dtrace_cpc_in_use++; + rw_exit(&kcpc_cpuctx_lock); + + /* + * Locate this enabling in the first free entry of the active + * request array. + */ + for (i = 0; i < cpc_ncounters; i++) { + if (dcpc_actv_reqs[i] == NULL) { + dcpc_actv_reqs[i] = pp; + pp->dcpc_actv_req_idx = i; + found = 1; + break; + } + } + + /* + * If we couldn't find a slot for this probe then there is no + * room at the inn. + */ + if (!found) { + dtrace_cpc_in_use--; + return (-1); + } + + ASSERT(pp->dcpc_actv_req_idx >= 0); + + /* + * DTrace is taking over CPC contexts, so stop collecting + * capacity/utilization data for all CPUs. + */ + if (dtrace_cpc_in_use == 1) + cu_disable(); + + /* + * The following must hold true if we are to (attempt to) enable + * this request: + * + * 1) No enablings currently exist. We allow all platforms to + * proceed if this is true. + * + * OR + * + * 2) If the platform is multi overflow capable and there are + * less valid enablings than there are counters. There is no + * guarantee that a platform can accommodate as many events as + * it has counters for but we will at least try to program + * up to that many requests. + * + * The 'dcpc_enablings' variable is implictly protected by locking + * provided by the DTrace framework and the cpu management framework. + */ + if (dcpc_enablings == 0 || (dcpc_mult_ovf_cap && + dcpc_enablings < cpc_ncounters)) { + /* + * Before attempting to program the first enabling we need to + * invalidate any lwp-based contexts and lay claim to the + * overflow interrupt mechanism. + */ + if (dcpc_enablings == 0) { + kcpc_invalidate_all(); + dcpc_claim_interrupts(); + } + + if (dcpc_program_event(pp) == 0) { + dcpc_enablings++; + return (0); + } + } + + /* + * If active enablings existed before we failed to enable this probe + * on a multi event capable platform then we need to restart counters + * as they will have been stopped in the attempted configuration. The + * context should now just contain the request prior to this failed + * enabling. + */ + if (dcpc_enablings > 0 && dcpc_mult_ovf_cap) { + c = cpu_list; + + ASSERT(dcpc_mult_ovf_cap == 1); + do { + /* + * Skip CPUs that are currently offline. + */ + if (c->cpu_flags & CPU_OFFLINE) + continue; + + kcpc_cpu_program(c, c->cpu_cpc_ctx); + } while ((c = c->cpu_next) != cpu_list); + } + + /* + * Give up any claim to the overflow interrupt mechanism if no + * dcpc based enablings exist. + */ + if (dcpc_enablings == 0) + dcpc_surrender_interrupts(); + + dtrace_cpc_in_use--; + dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; + pp->dcpc_actv_req_idx = pp->dcpc_picno = -1; + + /* + * If all probes are removed, enable capacity/utilization data + * collection for every CPU. + */ + if (dtrace_cpc_in_use == 0) + cu_enable(); + + return (-1); +} + +/* + * If only one enabling is active then remove the context and free + * everything up. If there are multiple enablings active then remove this + * one, its associated meta-data and re-program the hardware. + */ +/*ARGSUSED*/ +static void +dcpc_disable(void *arg, dtrace_id_t id, void *parg) +{ + cpu_t *c; + dcpc_probe_t *pp = parg; + + ASSERT(MUTEX_HELD(&cpu_lock)); + + kpreempt_disable(); + + /* + * This probe didn't actually make it as far as being fully enabled + * so we needn't do anything with it. + */ + if (pp->dcpc_enabled == 0) { + /* + * If we actually allocated this request a slot in the + * request array but failed to enabled it then remove the + * entry in the array. + */ + if (pp->dcpc_actv_req_idx >= 0) { + dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; + pp->dcpc_actv_req_idx = pp->dcpc_picno = + pp->dcpc_disabling = -1; + } + + kpreempt_enable(); + return; + } + + /* + * If this is the only enabling then stop all the counters and + * free up the meta-data. + */ + if (dcpc_enablings == 1) { + ASSERT(dtrace_cpc_in_use == 1); + + dcpc_block_interrupts(); + + c = cpu_list; + + do { + dcpc_disable_cpu(c); + } while ((c = c->cpu_next) != cpu_list); + + dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; + dcpc_surrender_interrupts(); + } else { + /* + * This platform can support multiple overflow events and + * the enabling being disabled is not the last one. Remove this + * enabling and re-program the hardware with the new config. + */ + ASSERT(dcpc_mult_ovf_cap); + ASSERT(dcpc_enablings > 1); + + pp->dcpc_disabling = 1; + (void) dcpc_program_event(pp); + } + + kpreempt_enable(); + + dcpc_enablings--; + dtrace_cpc_in_use--; + pp->dcpc_enabled = 0; + pp->dcpc_actv_req_idx = pp->dcpc_picno = pp->dcpc_disabling = -1; + + /* + * If all probes are removed, enable capacity/utilization data + * collection for every CPU + */ + if (dtrace_cpc_in_use == 0) + cu_enable(); +} + +/*ARGSUSED*/ +static int +dcpc_cpu_setup(cpu_setup_t what, processorid_t cpu, void *arg) +{ + cpu_t *c; + uint8_t *state; + + ASSERT(MUTEX_HELD(&cpu_lock)); + + switch (what) { + case CPU_OFF: + /* + * Offline CPUs are not allowed to take part so remove this + * CPU if we are actively tracing. + */ + if (dtrace_cpc_in_use) { + c = cpu_get(cpu); + state = &cpu_core[c->cpu_id].cpuc_dcpc_intr_state; + + /* + * Indicate that a configuration is in process in + * order to stop overflow interrupts being processed + * on this CPU while we disable it. + */ + while (atomic_cas_8(state, DCPC_INTR_FREE, + DCPC_INTR_CONFIG) != DCPC_INTR_FREE) + continue; + + dcpc_disable_cpu(c); + + /* + * Reset this CPUs interrupt state as the configuration + * has ended. + */ + cpu_core[c->cpu_id].cpuc_dcpc_intr_state = + DCPC_INTR_FREE; + membar_producer(); + } + break; + + case CPU_ON: + case CPU_SETUP: + /* + * This CPU is being initialized or brought online so program + * it with the current request set if we are actively tracing. + */ + if (dtrace_cpc_in_use) { + c = cpu_get(cpu); + (void) dcpc_program_cpu_event(c); + } + break; + + default: + break; + } + + return (0); +} + +static dtrace_pattr_t dcpc_attr = { +{ DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_COMMON }, +{ DTRACE_STABILITY_PRIVATE, DTRACE_STABILITY_PRIVATE, DTRACE_CLASS_UNKNOWN }, +{ DTRACE_STABILITY_PRIVATE, DTRACE_STABILITY_PRIVATE, DTRACE_CLASS_UNKNOWN }, +{ DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_CPU }, +{ DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_COMMON }, +}; + +static dtrace_pops_t dcpc_pops = { + dcpc_provide, + NULL, + dcpc_enable, + dcpc_disable, + NULL, + NULL, + NULL, + NULL, + dcpc_usermode, + dcpc_destroy +}; + +/*ARGSUSED*/ +static int +dcpc_open(dev_t *devp, int flag, int otyp, cred_t *cred_p) +{ + return (0); +} + +/*ARGSUSED*/ +static int +dcpc_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) +{ + int error; + + switch (infocmd) { + case DDI_INFO_DEVT2DEVINFO: + *result = (void *)dcpc_devi; + error = DDI_SUCCESS; + break; + case DDI_INFO_DEVT2INSTANCE: + *result = (void *)0; + error = DDI_SUCCESS; + break; + default: + error = DDI_FAILURE; + } + return (error); +} + +static int +dcpc_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) +{ + switch (cmd) { + case DDI_DETACH: + break; + case DDI_SUSPEND: + return (DDI_SUCCESS); + default: + return (DDI_FAILURE); + } + + if (dtrace_unregister(dcpc_pid) != 0) + return (DDI_FAILURE); + + ddi_remove_minor_node(devi, NULL); + + mutex_enter(&cpu_lock); + unregister_cpu_setup_func(dcpc_cpu_setup, NULL); + mutex_exit(&cpu_lock); + + kmem_free(dcpc_actv_reqs, cpc_ncounters * sizeof (dcpc_probe_t *)); + + kcpc_unregister_dcpc(); + + return (DDI_SUCCESS); +} + +static int +dcpc_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) +{ + uint_t caps; + char *attrs; + + switch (cmd) { + case DDI_ATTACH: + break; + case DDI_RESUME: + return (DDI_SUCCESS); + default: + return (DDI_FAILURE); + } + + if (kcpc_pcbe_loaded() == -1) + return (DDI_FAILURE); + + caps = kcpc_pcbe_capabilities(); + + if (!(caps & CPC_CAP_OVERFLOW_INTERRUPT)) { + cmn_err(CE_NOTE, "!dcpc: Counter Overflow not supported"\ + " on this processor"); + return (DDI_FAILURE); + } + + if (ddi_create_minor_node(devi, "dcpc", S_IFCHR, 0, + DDI_PSEUDO, NULL) == DDI_FAILURE || + dtrace_register("cpc", &dcpc_attr, DTRACE_PRIV_KERNEL, + NULL, &dcpc_pops, NULL, &dcpc_pid) != 0) { + ddi_remove_minor_node(devi, NULL); + return (DDI_FAILURE); + } + + mutex_enter(&cpu_lock); + register_cpu_setup_func(dcpc_cpu_setup, NULL); + mutex_exit(&cpu_lock); + + dcpc_ovf_mask = (1 << cpc_ncounters) - 1; + ASSERT(dcpc_ovf_mask != 0); + + if (caps & CPC_CAP_OVERFLOW_PRECISE) + dcpc_mult_ovf_cap = 1; + + /* + * Determine which, if any, mask attribute the back-end can use. + */ + attrs = kcpc_list_attrs(); + if (strstr(attrs, "umask") != NULL) + dcpc_mask_type |= DCPC_UMASK; + else if (strstr(attrs, "emask") != NULL) + dcpc_mask_type |= DCPC_EMASK; + + /* + * The dcpc_actv_reqs array is used to store the requests that + * we currently have programmed. The order of requests in this + * array is not necessarily the order that the event appears in + * the kcpc_request_t array. Once entered into a slot in the array + * the entry is not moved until it's removed. + */ + dcpc_actv_reqs = + kmem_zalloc(cpc_ncounters * sizeof (dcpc_probe_t *), KM_SLEEP); + + dcpc_min_overflow = ddi_prop_get_int(DDI_DEV_T_ANY, devi, + DDI_PROP_DONTPASS, "dcpc-min-overflow", DCPC_MIN_OVF_DEFAULT); + + kcpc_register_dcpc(dcpc_fire); + + ddi_report_dev(devi); + dcpc_devi = devi; + + return (DDI_SUCCESS); +} + +static struct cb_ops dcpc_cb_ops = { + dcpc_open, /* open */ + nodev, /* close */ + nulldev, /* strategy */ + nulldev, /* print */ + nodev, /* dump */ + nodev, /* read */ + nodev, /* write */ + nodev, /* ioctl */ + nodev, /* devmap */ + nodev, /* mmap */ + nodev, /* segmap */ + nochpoll, /* poll */ + ddi_prop_op, /* cb_prop_op */ + 0, /* streamtab */ + D_NEW | D_MP /* Driver compatibility flag */ +}; + +static struct dev_ops dcpc_ops = { + DEVO_REV, /* devo_rev, */ + 0, /* refcnt */ + dcpc_info, /* get_dev_info */ + nulldev, /* identify */ + nulldev, /* probe */ + dcpc_attach, /* attach */ + dcpc_detach, /* detach */ + nodev, /* reset */ + &dcpc_cb_ops, /* driver operations */ + NULL, /* bus operations */ + nodev, /* dev power */ + ddi_quiesce_not_needed /* quiesce */ +}; + +/* + * Module linkage information for the kernel. + */ +static struct modldrv modldrv = { + &mod_driverops, /* module type */ + "DTrace CPC Module", /* name of module */ + &dcpc_ops, /* driver ops */ +}; + +static struct modlinkage modlinkage = { + MODREV_1, + (void *)&modldrv, + NULL +}; + +int +_init(void) +{ + return (mod_install(&modlinkage)); +} + +int +_info(struct modinfo *modinfop) +{ + return (mod_info(&modlinkage, modinfop)); +} + +int +_fini(void) +{ + return (mod_remove(&modlinkage)); +} diff --git a/src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.conf b/src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.conf new file mode 100644 index 00000000..3f186940 --- /dev/null +++ b/src/VBox/ExtPacks/VBoxDTrace/onnv/uts/common/dtrace/dcpc.conf @@ -0,0 +1,33 @@ +# +# CDDL HEADER START +# +# The contents of this file are subject to the terms of the +# Common Development and Distribution License (the "License"). +# You may not use this file except in compliance with the License. +# +# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +# or http://www.opensolaris.org/os/licensing. +# See the License for the specific language governing permissions +# and limitations under the License. +# +# When distributing Covered Code, include this CDDL HEADER in each +# file and include the License file at usr/src/OPENSOLARIS.LICENSE. +# If applicable, add the following below this CDDL HEADER, with the +# fields enclosed by brackets "[]" replaced with your own identifying +# information: Portions Copyright [yyyy] [name of copyright owner] +# +# CDDL HEADER END +# +# +# Copyright 2009 Sun Microsystems, Inc. All rights reserved. +# Use is subject to license terms. +# +name="dcpc" parent="pseudo" instance=0; + +# +# dcpc-min-overflow is the lower limit on the rate of overflow that can be +# set on a probe. The default value is 5000. Decrease this value to create +# probes with lower overflow values. Setting this value too low on a rapidly +# increasing event could render a system unusable. +# +#dcpc-min-overflow=5000; |