diff options
Diffstat (limited to '')
-rw-r--r-- | src/VBox/ValidationKit/bootsectors/bs3kit/bs3-mode-CpuDetect.asm | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/src/VBox/ValidationKit/bootsectors/bs3kit/bs3-mode-CpuDetect.asm b/src/VBox/ValidationKit/bootsectors/bs3kit/bs3-mode-CpuDetect.asm new file mode 100644 index 00000000..b54cba28 --- /dev/null +++ b/src/VBox/ValidationKit/bootsectors/bs3kit/bs3-mode-CpuDetect.asm @@ -0,0 +1,347 @@ +; $Id: bs3-mode-CpuDetect.asm $ +;; @file +; BS3Kit - Bs3CpuDetect +; + +; +; Copyright (C) 2007-2023 Oracle and/or its affiliates. +; +; This file is part of VirtualBox base platform packages, as +; available from https://www.virtualbox.org. +; +; This program is free software; you can redistribute it and/or +; modify it under the terms of the GNU General Public License +; as published by the Free Software Foundation, in version 3 of the +; License. +; +; This program is distributed in the hope that it will be useful, but +; WITHOUT ANY WARRANTY; without even the implied warranty of +; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +; General Public License for more details. +; +; You should have received a copy of the GNU General Public License +; along with this program; if not, see <https://www.gnu.org/licenses>. +; +; The contents of this file may alternatively be used under the terms +; of the Common Development and Distribution License Version 1.0 +; (CDDL), a copy of it is provided in the "COPYING.CDDL" file included +; in the VirtualBox distribution, in which case the provisions of the +; CDDL are applicable instead of those of the GPL. +; +; You may elect to license modified versions of this file under the +; terms and conditions of either the GPL or the CDDL or both. +; +; SPDX-License-Identifier: GPL-3.0-only OR CDDL-1.0 +; + +%include "bs3kit-template-header.mac" + +BS3_EXTERN_DATA16 g_uBs3CpuDetected + + +;; +; Rough CPU detection, mainly for detecting really old CPUs. +; +; A Bs3CpuDetectEx can be added if this is insufficient. +; +; @returns BS3CPU_xxx in xAX. +; @cproto BS3_DECL(BS3CPU) Bs3CpuDetect(void); +; +; @uses xAX. +; +; @remarks ASSUMES we're in ring-0 when not in some kind of real mode. +; +; @note We put the real mode version of this code in the RMTEXT16 segment +; to save space elsewhere. We generate a far call stub that goes +; to the right segment. +; +%if TMPL_MODE == BS3_MODE_RM +BS3_BEGIN_RMTEXT16 +BS3_PROC_BEGIN_MODE Bs3CpuDetect, BS3_PBC_FAR +%else +TMPL_BEGIN_TEXT +BS3_PROC_BEGIN_MODE Bs3CpuDetect, BS3_PBC_HYBRID +%endif +CPU 8086 + push xBP + mov xBP, xSP + pushf ; xBP - xCB*1 + push xCX ; xBP - xCB*2 + push xDX ; xBP - xCB*3 + push xBX ; xBP - xCB*4 + sub xSP, 20h ; xBP - xCB*4 - 20h + +%ifndef TMPL_CMN_PAGING + %ifdef TMPL_RM + %if 1 ; this is simpler + ; + ; FLAGS bits 15:12 are always set on 8086, 8088, V20, V30, 80186, and + ; 80188. FLAGS bit 15 is always zero on 286+, whereas bit 14 is NT and + ; bits 13:12 are IOPL. + ; + test byte [xBP - xCB + 1], 80h ; Top byte of saved flags. + jz .286plus + %else + ; + ; When executing 'PUSH SP' the 8086, 8088, V20, V30, 80186, and 80188 + ; should be pushing the updated SP value instead of the initial one. + ; + push xSP + pop xAX + cmp xAX, xSP + je .286plus + %endif + + ; + ; Older than 286. + ; + ; Detect 8086/8088/V20/V30 vs. 80186/80188 by checking for pre 80186 + ; shift behavior. the 80186/188 and later will mask the CL value according + ; to the width of the destination register, whereas 8086/88 and V20/30 will + ; perform the exact number of shifts specified. + ; + mov cl, 20h ; Shift count; 80186/88 and later will mask this by 0x1f (or 0xf)? + mov dx, 7fh + shl dx, cl + cmp dx, 7fh ; If no change, this is a 80186/88. + mov xAX, BS3CPU_80186 + je .return + + ; + ; Detect 8086/88 vs V20/30 by exploiting undocumented POP CS encoding + ; that was redefined on V20/30 to SET1. + ; + xor ax, ax ; clear + push cs + db 0fh ; 8086/88: pop cs V20/30: set1 bl,cl + db 14h, 3ch ; 8086/88: add al, 3ch + ; 8086/88: al = 3ch V20/30: al = 0, cs on stack, bl modified. + cmp al, 3ch + jne .is_v20_or_v30 + mov xAX, BS3CPU_8086 + jmp .return + +.is_v20_or_v30: + pop xCX ; unclaimed CS + mov xAX, BS3CPU_V20 + jmp .return + + %endif ; TMPL_RM + +CPU 286 +.286plus: + ; + ; The 4th bit of the machine status word / CR0 indicates the precense + ; of a 80387 or later co-processor (a 80287+80386 => ET=0). 486 and + ; later should be hardcoding this to 1, according to the documentation + ; (need to test on 486SX). The initial idea here then would be to + ; assume 386+ if ET=1. + ; + ; The second idea was to check whether any reserved bits are set, + ; because the 286 here has bits 4 thru 15 all set. Unfortunately, it + ; turned out the 386SX and AMD 486DX-40 also sets bits 4 thru 15 when + ; using SMSW. So, nothing conclusive to distinguish 386 from 286, but + ; we've probably got a safe 486+ detection here. + ; + ;; @todo check if LOADALL can set any of the reserved bits on a 286 or 386. + smsw ax + test ax, ~(X86_CR0_PE | X86_CR0_MP | X86_CR0_EM | X86_CR0_TS | X86_CR0_ET | X86_CR0_NE) + jz .486plus + + ; + ; The 286 stores 0xff in the high byte of the SIDT and SGDT base + ; address (since it only did 24-bit addressing and the top 8-bit was + ; reserved for the 386). ASSUMES low IDT (which is the case for BS3Kit). + ; + sidt [xBP - xCB*4 - 20h] + cmp byte [xBP - xCB*4 - 20h + 2 + 3], 0ffh + jne .386plus + + %if 0 + ; + ; Detect 80286 by checking whether the IOPL and NT bits of EFLAGS can be + ; modified or not. There are different accounts of these bits. Dr.Dobb's + ; (http://www.drdobbs.com/embedded-systems/processor-detection-schemes/184409011) + ; say they are undefined on 286es and will always be zero. Whereas Intel + ; iAPX 286 Programmer's Reference Manual (both order #210498-001 and + ; #210498-003) documents both IOPL and NT, but with comment 4 on page + ; C-43 stating that they cannot be POPFed in real mode and will both + ; remain 0. This is different from the 386+, where the NT flag isn't + ; privileged according to page 3-37 in #230985-003. Later Intel docs + ; (#235383-052US, page 4-192) documents real mode as taking both NT and + ; IOPL from what POPF reads off the stack - which is the behavior + ; observed a 386SX here. + ; + test al, X86_CR0_PE ; This flag test doesn't work in protected mode, ... + jnz .386plus ; ... so ASSUME 386plus if in PE for now. + + pushf ; Save a copy of the original flags for restoring IF. + pushf + pop ax + xor ax, X86_EFL_IOPL | X86_EFL_NT ; Try modify IOPL and NT. + and ax, ~X86_EFL_IF ; Try clear IF. + push ax ; Load modified flags. + popf + pushf ; Get actual flags. + pop dx + popf ; Restore IF, IOPL and NT. + cmp ax, dx + je .386plus ; If any of the flags are set, we're on 386+. + + ; While we could in theory be in v8086 mode at this point and be fooled + ; by a flaky POPF implementation, we assume this isn't the case in our + ; execution environment. + %endif +.is_286: + mov ax, BS3CPU_80286 + jmp .return +%endif ; !TMPL_CMN_PAGING + +CPU 386 +.386plus: +.486plus: + ; + ; Check for CPUID and AC. The former flag indicates CPUID support, the + ; latter was introduced with the 486. + ; + mov ebx, esp ; Save esp. + and esp, 0fffch ; Clear high word and don't trigger ACs. + pushfd + mov eax, [esp] ; eax = original EFLAGS. + xor dword [esp], X86_EFL_ID | X86_EFL_AC ; Flip the ID and AC flags. + popfd ; Load modified flags. + pushfd ; Save actual flags. + xchg eax, [esp] ; Switch, so the stack has the original flags. + xor eax, [esp] ; Calc changed flags. + popf ; Restore EFLAGS. + mov esp, ebx ; Restore possibly unaligned ESP. + test eax, X86_EFL_ID + jnz .have_cpuid ; If ID changed, we've got CPUID. + test eax, X86_EFL_AC + mov xAX, BS3CPU_80486 + jnz .return ; If AC changed, we've got a 486 without CPUID (or similar). + mov xAX, BS3CPU_80386 + jmp .return + +CPU 586 +.have_cpuid: + ; + ; Do a very simple minded check here using the (standard) family field. + ; While here, we also check for PAE. + ; + mov eax, 1 + cpuid + + ; Calc the extended family and model values before we mess up EAX. + mov cl, ah + and cl, 0fh + cmp cl, 0fh + jnz .not_extended_family + mov ecx, eax + shr ecx, 20 + and cl, 7fh + add cl, 0fh +.not_extended_family: ; cl = family + mov ch, al + shr ch, 4 + cmp cl, 0fh + jae .extended_model + cmp cl, 06h ; actually only intel, but we'll let this slip for now. + jne .done_model +.extended_model: + shr eax, 12 + and al, 0f0h + or ch, al +.done_model: ; ch = model + + ; Start assembling return flags, checking for PSE + PAE. + mov eax, X86_CPUID_FEATURE_EDX_PSE | X86_CPUID_FEATURE_EDX_PAE + and eax, edx + mov ah, al + AssertCompile(X86_CPUID_FEATURE_EDX_PAE_BIT > BS3CPU_F_PAE_BIT - 8) ; 6 vs 10-8=2 + and al, X86_CPUID_FEATURE_EDX_PAE + shr al, X86_CPUID_FEATURE_EDX_PAE_BIT - (BS3CPU_F_PAE_BIT - 8) + AssertCompile(X86_CPUID_FEATURE_EDX_PSE_BIT == BS3CPU_F_PSE_BIT - 8) ; 3 vs 11-8=3 + and ah, X86_CPUID_FEATURE_EDX_PSE + or ah, al + or ah, (BS3CPU_F_CPUID >> 8) + + ; Add the CPU type based on the family and model values. + cmp cl, 6 + jne .not_family_06h + mov al, BS3CPU_PPro + cmp ch, 1 + jbe .return + mov al, BS3CPU_PProOrNewer + jmp .NewerThanPPro + +.not_family_06h: + mov al, BS3CPU_PProOrNewer + ja .NewerThanPPro + cmp cl, 5 + mov al, BS3CPU_Pentium + je .return + cmp cl, 4 + mov al, BS3CPU_80486 + je .return + cmp cl, 3 + mov al, BS3CPU_80386 + je .return + +.NewerThanPPro: + + ; Check for extended leaves and long mode. + push xAX ; save PAE+PProOrNewer + mov eax, 0x80000000 + cpuid + sub eax, 0x80000001 ; Minimum leaf 0x80000001 + cmp eax, 0x00010000 ; At most 0x10000 leaves. + ja .no_ext_leaves + + mov eax, 0x80000001 + cpuid + pop xAX ; restore PAE+PProOrNewer + test edx, X86_CPUID_EXT_FEATURE_EDX_LONG_MODE + jz .no_long_mode + or ah, ((BS3CPU_F_CPUID_EXT_LEAVES | BS3CPU_F_LONG_MODE) >> 8) + jmp .no_check_for_nx +.no_long_mode: + or ah, (BS3CPU_F_CPUID_EXT_LEAVES >> 8) +.no_check_for_nx: + test edx, X86_CPUID_EXT_FEATURE_EDX_NX + jz .return + or ax, BS3CPU_F_NX + jmp .return + +.no_ext_leaves: + pop xAX ; restore PAE+PProOrNewer + +CPU 8086 +.return: + ; + ; Save the return value. + ; + mov [BS3_DATA16_WRT(g_uBs3CpuDetected)], ax + + ; + ; Epilogue. + ; + add xSP, 20h + pop xBX + pop xDX + pop xCX + popf + pop xBP + BS3_HYBRID_RET + +BS3_PROC_END_MODE Bs3CpuDetect + + +%if TMPL_MODE == BS3_MODE_RM +BS3_BEGIN_TEXT16_NEARSTUBS +BS3_PROC_BEGIN_MODE Bs3CpuDetect, BS3_PBC_NEAR + call far TMPL_FAR_NM(Bs3CpuDetect) + ret +BS3_PROC_END_MODE Bs3CpuDetect +%endif + |