diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/src/misc/prerr.c')
-rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/src/misc/prerr.c | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/src/misc/prerr.c b/src/libs/xpcom18a4/nsprpub/pr/src/misc/prerr.c new file mode 100644 index 00000000..81baadf3 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/src/misc/prerr.c @@ -0,0 +1,128 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* + * + * prerr.c + * This file is automatically generated; please do not edit it. + */ +#include "prerror.h" +static const struct PRErrorMessage text[] = { + {"PR_OUT_OF_MEMORY_ERROR", "Memory allocation attempt failed"}, + {"PR_BAD_DESCRIPTOR_ERROR", "Invalid file descriptor"}, + {"PR_WOULD_BLOCK_ERROR", "The operation would have blocked"}, + {"PR_ACCESS_FAULT_ERROR", "Invalid memory address argument"}, + {"PR_INVALID_METHOD_ERROR", "Invalid function for file type"}, + {"PR_ILLEGAL_ACCESS_ERROR", "Invalid memory address argument"}, + {"PR_UNKNOWN_ERROR", "Some unknown error has occurred"}, + {"PR_PENDING_INTERRUPT_ERROR", "Operation interrupted by another thread"}, + {"PR_NOT_IMPLEMENTED_ERROR", "function not implemented"}, + {"PR_IO_ERROR", "I/O function error"}, + {"PR_IO_TIMEOUT_ERROR", "I/O operation timed out"}, + {"PR_IO_PENDING_ERROR", "I/O operation on busy file descriptor"}, + {"PR_DIRECTORY_OPEN_ERROR", "The directory could not be opened"}, + {"PR_INVALID_ARGUMENT_ERROR", "Invalid function argument"}, + {"PR_ADDRESS_NOT_AVAILABLE_ERROR", "Network address not available (in use?)"}, + {"PR_ADDRESS_NOT_SUPPORTED_ERROR", "Network address type not supported"}, + {"PR_IS_CONNECTED_ERROR", "Already connected"}, + {"PR_BAD_ADDRESS_ERROR", "Network address is invalid"}, + {"PR_ADDRESS_IN_USE_ERROR", "Local Network address is in use"}, + {"PR_CONNECT_REFUSED_ERROR", "Connection refused by peer"}, + {"PR_NETWORK_UNREACHABLE_ERROR", "Network address is presently unreachable"}, + {"PR_CONNECT_TIMEOUT_ERROR", "Connection attempt timed out"}, + {"PR_NOT_CONNECTED_ERROR", "Network file descriptor is not connected"}, + {"PR_LOAD_LIBRARY_ERROR", "Failure to load dynamic library"}, + {"PR_UNLOAD_LIBRARY_ERROR", "Failure to unload dynamic library"}, + {"PR_FIND_SYMBOL_ERROR", "Symbol not found in any of the loaded dynamic libraries"}, + {"PR_INSUFFICIENT_RESOURCES_ERROR", "Insufficient system resources"}, + {"PR_DIRECTORY_LOOKUP_ERROR", "A directory lookup on a network address has failed"}, + {"PR_TPD_RANGE_ERROR", "Attempt to access a TPD key that is out of range"}, + {"PR_PROC_DESC_TABLE_FULL_ERROR", "Process open FD table is full"}, + {"PR_SYS_DESC_TABLE_FULL_ERROR", "System open FD table is full"}, + {"PR_NOT_SOCKET_ERROR", "Network operation attempted on non-network file descriptor"}, + {"PR_NOT_TCP_SOCKET_ERROR", "TCP-specific function attempted on a non-TCP file descriptor"}, + {"PR_SOCKET_ADDRESS_IS_BOUND_ERROR", "TCP file descriptor is already bound"}, + {"PR_NO_ACCESS_RIGHTS_ERROR", "Access Denied"}, + {"PR_OPERATION_NOT_SUPPORTED_ERROR", "The requested operation is not supported by the platform"}, + {"PR_PROTOCOL_NOT_SUPPORTED_ERROR", "The host operating system does not support the protocol requested"}, + {"PR_REMOTE_FILE_ERROR", "Access to the remote file has been severed"}, + {"PR_BUFFER_OVERFLOW_ERROR", "The value requested is too large to be stored in the data buffer provided"}, + {"PR_CONNECT_RESET_ERROR", "TCP connection reset by peer"}, + {"PR_RANGE_ERROR", "Unused"}, + {"PR_DEADLOCK_ERROR", "The operation would have deadlocked"}, + {"PR_FILE_IS_LOCKED_ERROR", "The file is already locked"}, + {"PR_FILE_TOO_BIG_ERROR", "Write would result in file larger than the system allows"}, + {"PR_NO_DEVICE_SPACE_ERROR", "The device for storing the file is full"}, + {"PR_PIPE_ERROR", "Unused"}, + {"PR_NO_SEEK_DEVICE_ERROR", "Unused"}, + {"PR_IS_DIRECTORY_ERROR", "Cannot perform a normal file operation on a directory"}, + {"PR_LOOP_ERROR", "Symbolic link loop"}, + {"PR_NAME_TOO_LONG_ERROR", "File name is too long"}, + {"PR_FILE_NOT_FOUND_ERROR", "File not found"}, + {"PR_NOT_DIRECTORY_ERROR", "Cannot perform directory operation on a normal file"}, + {"PR_READ_ONLY_FILESYSTEM_ERROR", "Cannot write to a read-only file system"}, + {"PR_DIRECTORY_NOT_EMPTY_ERROR", "Cannot delete a directory that is not empty"}, + {"PR_FILESYSTEM_MOUNTED_ERROR", "Cannot delete or rename a file object while the file system is busy"}, + {"PR_NOT_SAME_DEVICE_ERROR", "Cannot rename a file to a file system on another device"}, + {"PR_DIRECTORY_CORRUPTED_ERROR", "The directory object in the file system is corrupted"}, + {"PR_FILE_EXISTS_ERROR", "Cannot create or rename a filename that already exists"}, + {"PR_MAX_DIRECTORY_ENTRIES_ERROR", "Directory is full. No additional filenames may be added"}, + {"PR_INVALID_DEVICE_STATE_ERROR", "The required device was in an invalid state"}, + {"PR_DEVICE_IS_LOCKED_ERROR", "The device is locked"}, + {"PR_NO_MORE_FILES_ERROR", "No more entries in the directory"}, + {"PR_END_OF_FILE_ERROR", "Encountered end of file"}, + {"PR_FILE_SEEK_ERROR", "Seek error"}, + {"PR_FILE_IS_BUSY_ERROR", "The file is busy"}, + {"PR_OPERATION_ABORTED_ERROR", "The I/O operation was aborted"}, + {"PR_IN_PROGRESS_ERROR", "Operation is still in progress (probably a non-blocking connect)"}, + {"PR_ALREADY_INITIATED_ERROR", "Operation has already been initiated (probably a non-blocking connect)"}, + {"PR_GROUP_EMPTY_ERROR", "The wait group is empty"}, + {"PR_INVALID_STATE_ERROR", "Object state improper for request"}, + {"PR_NETWORK_DOWN_ERROR", "Network is down"}, + {"PR_SOCKET_SHUTDOWN_ERROR", "Socket shutdown"}, + {"PR_CONNECT_ABORTED_ERROR", "Connection aborted"}, + {"PR_HOST_UNREACHABLE_ERROR", "Host is unreachable"}, + {"PR_LIBRARY_NOT_LOADED_ERROR", "The library is not loaded"}, + {"PR_MAX_ERROR", "Placeholder for the end of the list"}, + {0, 0} +}; + +static const struct PRErrorTable et = { text, "prerr", -6000L, 76 }; + +void nspr_InitializePRErrorTable(void) { + PR_ErrorInstallTable(&et); +} |