summaryrefslogtreecommitdiffstats
path: root/src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c')
-rw-r--r--src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c317
1 files changed, 317 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c b/src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c
new file mode 100644
index 00000000..44e2a608
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c
@@ -0,0 +1,317 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/*
+** File: ntioto.c
+** Description:
+** This test, ntioto.c, was designed to reproduce a bug reported by NES
+** on WindowsNT (fibers implementation). NSPR was asserting in ntio.c
+** after PR_AcceptRead() had timed out. I/O performed subsequent to the
+** call to PR_AcceptRead() could complete on a CPU other than the one
+** on which it was started. The assert in ntio.c detected this, then
+** asserted.
+**
+** Design:
+** This test will fail with an assert in ntio.c if the problem it was
+** designed to catch occurs. It returns 0 otherwise.
+**
+** The main() thread initializes and tears things down. A file is
+** opened for writing; this file will be written to by AcceptThread()
+** and JitterThread(). Main() creates a socket for reading, listens
+** and binds the socket.
+**
+** ConnectThread() connects to the socket created by main, then polls
+** the "state" variable. When state is AllDone, ConnectThread() exits.
+**
+** AcceptThread() calls PR_AcceptRead() on the socket. He fully expects
+** it to time out. After the timeout, AccpetThread() interacts with
+** JitterThread() via a common condition variable and the state
+** variable. The two threads ping-pong back and forth, each thread
+** writes the the file opened by main. This should provoke the
+** condition reported by NES (if we didn't fix it).
+**
+** The failure is not solid. It may fail within a few ping-pongs between
+** AcceptThread() and JitterThread() or may take a while. The default
+** iteration count, jitter, is set by DEFAULT_JITTER. This may be
+** modified at the command line with the -j option.
+**
+*/
+
+#include <plgetopt.h>
+#include <nspr.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/*
+** Test harness infrastructure
+*/
+PRLogModuleInfo *lm;
+PRLogModuleLevel msgLevel = PR_LOG_NONE;
+PRIntn debug = 0;
+PRIntn verbose = 0;
+PRUint32 failed_already = 0;
+/* end Test harness infrastructure */
+
+/* JITTER_DEFAULT: the number of times AcceptThread() and JitterThread() ping-pong */
+#define JITTER_DEFAULT 100000
+#define BASE_PORT 9867
+
+PRIntervalTime timeout;
+PRNetAddr listenAddr;
+PRFileDesc *listenSock;
+PRLock *ml;
+PRCondVar *cv;
+volatile enum {
+ RunJitter,
+ RunAcceptRead,
+ AllDone
+} state = RunAcceptRead;
+PRFileDesc *file1;
+PRIntn iCounter = 0;
+PRIntn jitter = JITTER_DEFAULT;
+PRBool resume = PR_FALSE;
+
+/*
+** Emit help text for this test
+*/
+static void Help( void )
+{
+ printf("Template: Help(): display your help message(s) here");
+ exit(1);
+} /* end Help() */
+
+
+/*
+** static computation of PR_AcceptRead() buffer size.
+*/
+#define ACCEPT_READ_DATASIZE 10
+#define ACCEPT_READ_BUFSIZE (PR_ACCEPT_READ_BUF_OVERHEAD + ACCEPT_READ_DATASIZE)
+
+static void AcceptThread(void *arg)
+{
+ PRIntn bytesRead;
+ char dataBuf[ACCEPT_READ_BUFSIZE];
+ PRFileDesc *arSock;
+ PRNetAddr *arAddr;
+
+ bytesRead = PR_AcceptRead( listenSock,
+ &arSock,
+ &arAddr,
+ dataBuf,
+ ACCEPT_READ_DATASIZE,
+ PR_SecondsToInterval(1));
+
+ if ( bytesRead == -1 && PR_GetError() == PR_IO_TIMEOUT_ERROR )
+ if ( debug ) printf("AcceptRead timed out\n");
+ else
+ if ( debug ) printf("Oops! read: %d, error: %d\n", bytesRead, PR_GetError());
+
+ while( state != AllDone ) {
+ PR_Lock( ml );
+ while( state != RunAcceptRead )
+ PR_WaitCondVar( cv, PR_INTERVAL_NO_TIMEOUT );
+ if ( ++iCounter >= jitter )
+ state = AllDone;
+ else
+ state = RunJitter;
+ if ( verbose ) printf(".");
+ PR_NotifyCondVar( cv );
+ PR_Unlock( ml );
+ PR_Write( file1, ".", 1 );
+ }
+
+ return;
+} /* end AcceptThread() */
+
+static void JitterThread(void *arg)
+{
+ while( state != AllDone ) {
+ PR_Lock( ml );
+ while( state != RunJitter && state != AllDone )
+ PR_WaitCondVar( cv, PR_INTERVAL_NO_TIMEOUT );
+ if ( state != AllDone)
+ state = RunAcceptRead;
+ if ( verbose ) printf("+");
+ PR_NotifyCondVar( cv );
+ PR_Unlock( ml );
+ PR_Write( file1, "+", 1 );
+ }
+ return;
+} /* end Goofy() */
+
+static void ConnectThread( void *arg )
+{
+ PRStatus rv;
+ PRFileDesc *clientSock;
+ PRNetAddr serverAddress;
+ clientSock = PR_NewTCPSocket();
+
+ PR_ASSERT(clientSock);
+
+ if ( resume ) {
+ if ( debug ) printf("pausing 3 seconds before connect\n");
+ PR_Sleep( PR_SecondsToInterval(3));
+ }
+
+ memset(&serverAddress, 0, sizeof(serverAddress));
+ rv = PR_InitializeNetAddr(PR_IpAddrLoopback, BASE_PORT, &serverAddress);
+ PR_ASSERT( PR_SUCCESS == rv );
+ rv = PR_Connect( clientSock,
+ &serverAddress,
+ PR_SecondsToInterval(1));
+ PR_ASSERT( PR_SUCCESS == rv );
+
+ /* that's all we do. ... Wait for the acceptread() to timeout */
+ while( state != AllDone )
+ PR_Sleep( PR_SecondsToInterval(1));
+ return;
+} /* end ConnectThread() */
+
+
+PRIntn main(PRIntn argc, char *argv[])
+{
+ PRThread *tJitter;
+ PRThread *tAccept;
+ PRThread *tConnect;
+ PRStatus rv;
+ /* This test if valid for WinNT only! */
+
+#if !defined(WINNT)
+ return 0;
+#endif
+
+ {
+ /*
+ ** Get command line options
+ */
+ PLOptStatus os;
+ PLOptState *opt = PL_CreateOptState(argc, argv, "hdrvj:");
+
+ while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+ {
+ if (PL_OPT_BAD == os) continue;
+ switch (opt->option)
+ {
+ case 'd': /* debug */
+ debug = 1;
+ msgLevel = PR_LOG_ERROR;
+ break;
+ case 'v': /* verbose mode */
+ verbose = 1;
+ msgLevel = PR_LOG_DEBUG;
+ break;
+ case 'j':
+ jitter = atoi(opt->value);
+ if ( jitter == 0)
+ jitter = JITTER_DEFAULT;
+ break;
+ case 'r':
+ resume = PR_TRUE;
+ break;
+ case 'h': /* help message */
+ Help();
+ break;
+ default:
+ break;
+ }
+ }
+ PL_DestroyOptState(opt);
+ }
+
+ lm = PR_NewLogModule("Test"); /* Initialize logging */
+
+ /* set concurrency */
+ PR_SetConcurrency( 4 );
+
+ /* setup thread synchronization mechanics */
+ ml = PR_NewLock();
+ cv = PR_NewCondVar( ml );
+
+ /* setup a tcp socket */
+ memset(&listenAddr, 0, sizeof(listenAddr));
+ rv = PR_InitializeNetAddr(PR_IpAddrAny, BASE_PORT, &listenAddr);
+ PR_ASSERT( PR_SUCCESS == rv );
+
+ listenSock = PR_NewTCPSocket();
+ PR_ASSERT( listenSock );
+
+ rv = PR_Bind( listenSock, &listenAddr);
+ PR_ASSERT( PR_SUCCESS == rv );
+
+ rv = PR_Listen( listenSock, 5 );
+ PR_ASSERT( PR_SUCCESS == rv );
+
+ /* open a file for writing, provoke bug */
+ file1 = PR_Open("xxxTestFile", PR_CREATE_FILE | PR_RDWR, 666);
+
+ /* create Connect thread */
+ tConnect = PR_CreateThread(
+ PR_USER_THREAD, ConnectThread, NULL,
+ PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD,
+ PR_JOINABLE_THREAD, 0 );
+ PR_ASSERT( tConnect );
+
+ /* create jitter off thread */
+ tJitter = PR_CreateThread(
+ PR_USER_THREAD, JitterThread, NULL,
+ PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD,
+ PR_JOINABLE_THREAD, 0 );
+ PR_ASSERT( tJitter );
+
+ /* create acceptread thread */
+ tAccept = PR_CreateThread(
+ PR_USER_THREAD, AcceptThread, NULL,
+ PR_PRIORITY_NORMAL, PR_LOCAL_THREAD,
+ PR_JOINABLE_THREAD, 0 );
+ PR_ASSERT( tAccept );
+
+ /* wait for all threads to quit, then terminate gracefully */
+ PR_JoinThread( tConnect );
+ PR_JoinThread( tAccept );
+ PR_JoinThread( tJitter );
+ PR_Close( listenSock );
+ PR_DestroyCondVar(cv);
+ PR_DestroyLock(ml);
+ PR_Close( file1 );
+ PR_Delete( "xxxTestFile");
+
+ /* test return and exit */
+ if (debug) printf("%s\n", (failed_already)? "FAIL" : "PASS");
+ return( (failed_already == PR_TRUE )? 1 : 0 );
+} /* main() */
+/* end ntioto.c */