summaryrefslogtreecommitdiffstats
path: root/src/libs/xpcom18a4/nsprpub/pr/tests/ranfile.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/ranfile.c')
-rw-r--r--src/libs/xpcom18a4/nsprpub/pr/tests/ranfile.c433
1 files changed, 433 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/ranfile.c b/src/libs/xpcom18a4/nsprpub/pr/tests/ranfile.c
new file mode 100644
index 00000000..a024bcd8
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/ranfile.c
@@ -0,0 +1,433 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/***********************************************************************
+**
+** Contact: AOF<freier@netscape.com>
+**
+** Name: ranfile.c
+**
+** Description: Test to hammer on various components of NSPR
+** Modification History:
+** 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
+** The debug mode will print all of the printfs associated with this test.
+** The regress mode will be the default mode. Since the regress tool limits
+** the output to a one line status:PASS or FAIL,all of the printf statements
+** have been handled with an if (debug_mode) statement.
+** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to
+** recognize the return code from tha main program.
+***********************************************************************/
+
+
+/***********************************************************************
+** Includes
+***********************************************************************/
+/* Used to get the command line option */
+#include "plgetopt.h"
+
+#include "prinit.h"
+#include "prthread.h"
+#include "prlock.h"
+#include "prcvar.h"
+#include "prmem.h"
+#include "prinrval.h"
+#include "prio.h"
+
+#include <string.h>
+#include <stdio.h>
+
+static PRIntn debug_mode = 0;
+static PRIntn failed_already=0;
+static PRThreadScope thread_scope = PR_LOCAL_THREAD;
+
+typedef enum {sg_go, sg_stop, sg_done} Action;
+typedef enum {sg_okay, sg_open, sg_close, sg_delete, sg_write, sg_seek} Problem;
+
+typedef struct Hammer_s {
+ PRLock *ml;
+ PRCondVar *cv;
+ PRUint32 id;
+ PRUint32 limit;
+ PRUint32 writes;
+ PRThread *thread;
+ PRIntervalTime timein;
+ Action action;
+ Problem problem;
+} Hammer_t;
+
+#define DEFAULT_LIMIT 10
+#define DEFAULT_THREADS 2
+#define DEFAULT_LOOPS 1
+
+static PRInt32 pageSize = 1024;
+static const char* baseName = "./";
+static const char *programName = "Random File";
+
+#ifdef XP_MAC
+#include "prlog.h"
+#define printf PR_LogPrint
+extern void SetupMacPrintfLog(char *logFile);
+#endif
+
+/***********************************************************************
+** PRIVATE FUNCTION: Random
+** DESCRIPTION:
+** Generate a pseudo-random number
+** INPUTS: None
+** OUTPUTS: None
+** RETURN: A pseudo-random unsigned number, 32-bits wide
+** SIDE EFFECTS:
+** Updates random seed (a static)
+** RESTRICTIONS:
+** None
+** MEMORY: NA
+** ALGORITHM:
+** Uses the current interval timer value, promoted to a 64 bit
+** float as a multiplier for a static residue (which begins
+** as an uninitialized variable). The result is bits [16..48)
+** of the product. Seed is then updated with the return value
+** promoted to a float-64.
+***********************************************************************/
+static PRUint32 Random(void)
+{
+ PRUint32 rv;
+ PRUint64 shift;
+ static PRFloat64 seed = 0x58a9382; /* Just make sure it isn't 0! */
+ PRFloat64 random = seed * (PRFloat64)PR_IntervalNow();
+ LL_USHR(shift, *((PRUint64*)&random), 16);
+ LL_L2UI(rv, shift);
+ seed = (PRFloat64)rv;
+ return rv;
+} /* Random */
+
+/***********************************************************************
+** PRIVATE FUNCTION: Thread
+** DESCRIPTION:
+** Hammer on the file I/O system
+** INPUTS: A pointer to the thread's private data
+** OUTPUTS: None
+** RETURN: None
+** SIDE EFFECTS:
+** Creates, accesses and deletes a file
+** RESTRICTIONS:
+** (Currently) must have file create permission in "/usr/tmp".
+** MEMORY: NA
+** ALGORITHM:
+** This function is a root of a thread
+** 1) Creates a (hopefully) unique file in /usr/tmp/
+** 2) Writes a zero to a random number of sequential pages
+** 3) Closes the file
+** 4) Reopens the file
+** 5) Seeks to a random page within the file
+** 6) Writes a one byte on that page
+** 7) Repeat steps [5..6] for each page in the file
+** 8) Close and delete the file
+** 9) Repeat steps [1..8] until told to stop
+** 10) Notify complete and return
+***********************************************************************/
+static void PR_CALLBACK Thread(void *arg)
+{
+ PRUint32 index;
+ char filename[30];
+ const char zero = 0;
+ PRFileDesc *file = NULL;
+ PRStatus rv = PR_SUCCESS;
+ Hammer_t *cd = (Hammer_t*)arg;
+
+ (void)sprintf(filename, "%ssg%04ld.dat", baseName, cd->id);
+
+ if (debug_mode) printf("Starting work on %s\n", filename);
+
+ while (PR_TRUE)
+ {
+ PRUint32 bytes;
+ PRUint32 minor = (Random() % cd->limit) + 1;
+ PRUint32 random = (Random() % cd->limit) + 1;
+ PRUint32 pages = (Random() % cd->limit) + 10;
+ while (minor-- > 0)
+ {
+ cd->problem = sg_okay;
+ if (cd->action != sg_go) goto finished;
+ cd->problem = sg_open;
+ file = PR_Open(filename, PR_RDWR|PR_CREATE_FILE, 0666);
+ if (file == NULL) goto finished;
+ for (index = 0; index < pages; index++)
+ {
+ cd->problem = sg_okay;
+ if (cd->action != sg_go) goto close;
+ cd->problem = sg_seek;
+ bytes = PR_Seek(file, pageSize * index, PR_SEEK_SET);
+ if (bytes != pageSize * index) goto close;
+ cd->problem = sg_write;
+ bytes = PR_Write(file, &zero, sizeof(zero));
+ if (bytes <= 0) goto close;
+ cd->writes += 1;
+ }
+ cd->problem = sg_close;
+ rv = PR_Close(file);
+ if (rv != PR_SUCCESS) goto purge;
+
+ cd->problem = sg_okay;
+ if (cd->action != sg_go) goto purge;
+
+ cd->problem = sg_open;
+ file = PR_Open(filename, PR_RDWR, 0666);
+ for (index = 0; index < pages; index++)
+ {
+ cd->problem = sg_okay;
+ if (cd->action != sg_go) goto close;
+ cd->problem = sg_seek;
+ bytes = PR_Seek(file, pageSize * index, PR_SEEK_SET);
+ if (bytes != pageSize * index) goto close;
+ cd->problem = sg_write;
+ bytes = PR_Write(file, &zero, sizeof(zero));
+ if (bytes <= 0) goto close;
+ cd->writes += 1;
+ random = (random + 511) % pages;
+ }
+ cd->problem = sg_close;
+ rv = PR_Close(file);
+ if (rv != PR_SUCCESS) goto purge;
+ cd->problem = sg_delete;
+ rv = PR_Delete(filename);
+ if (rv != PR_SUCCESS) goto finished;
+ }
+ }
+
+close:
+ (void)PR_Close(file);
+purge:
+ (void)PR_Delete(filename);
+finished:
+ PR_Lock(cd->ml);
+ cd->action = sg_done;
+ PR_NotifyCondVar(cd->cv);
+ PR_Unlock(cd->ml);
+
+ if (debug_mode) printf("Ending work on %s\n", filename);
+
+ return;
+} /* Thread */
+
+static Hammer_t hammer[100];
+static PRCondVar *cv;
+/***********************************************************************
+** PRIVATE FUNCTION: main
+** DESCRIPTION:
+** Hammer on the file I/O system
+** INPUTS: The usual argc and argv
+** argv[0] - program name (not used)
+** argv[1] - the number of times to execute the major loop
+** argv[2] - the number of threads to toss into the batch
+** argv[3] - the clipping number applied to randoms
+** default values: loops = 2, threads = 10, limit = 57
+** OUTPUTS: None
+** RETURN: None
+** SIDE EFFECTS:
+** Creates, accesses and deletes lots of files
+** RESTRICTIONS:
+** (Currently) must have file create permission in "/usr/tmp".
+** MEMORY: NA
+** ALGORITHM:
+** 1) Fork a "Thread()"
+** 2) Wait for 'interleave' seconds
+** 3) For [0..'threads') repeat [1..2]
+** 4) Mark all objects to stop
+** 5) Collect the threads, accumulating the results
+** 6) For [0..'loops') repeat [1..5]
+** 7) Print accumulated results and exit
+**
+** Characteristic output (from IRIX)
+** Random File: Using loops = 2, threads = 10, limit = 57
+** Random File: [min [avg] max] writes/sec average
+***********************************************************************/
+int main (int argc, char *argv[])
+{
+ PRLock *ml;
+ PRUint32 id = 0;
+ int active, poll;
+ PRIntervalTime interleave;
+ PRIntervalTime duration = 0;
+ int limit = 0, loops = 0, threads = 0, times;
+ PRUint32 writes, writesMin = 0x7fffffff, writesTot = 0, durationTot = 0, writesMax = 0;
+
+ const char *where[] = {"okay", "open", "close", "delete", "write", "seek"};
+
+ /* The command line argument: -d is used to determine if the test is being run
+ in debug mode. The regress tool requires only one line output:PASS or FAIL.
+ All of the printfs associated with this test has been handled with a if (debug_mode)
+ test.
+ Usage: test_name -d
+ */
+ PLOptStatus os;
+ PLOptState *opt = PL_CreateOptState(argc, argv, "Gdl:t:i:");
+ while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+ {
+ if (PL_OPT_BAD == os) continue;
+ switch (opt->option)
+ {
+ case 'G': /* global threads */
+ thread_scope = PR_GLOBAL_THREAD;
+ break;
+ case 'd': /* debug mode */
+ debug_mode = 1;
+ break;
+ case 'l': /* limiting number */
+ limit = atoi(opt->value);
+ break;
+ case 't': /* number of threads */
+ threads = atoi(opt->value);
+ break;
+ case 'i': /* iteration counter */
+ loops = atoi(opt->value);
+ break;
+ default:
+ break;
+ }
+ }
+ PL_DestroyOptState(opt);
+
+ /* main test */
+
+ PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0);
+ PR_STDIO_INIT();
+
+ interleave = PR_SecondsToInterval(10);
+
+#ifdef XP_MAC
+ SetupMacPrintfLog("ranfile.log");
+ debug_mode = 1;
+#endif
+
+ ml = PR_NewLock();
+ cv = PR_NewCondVar(ml);
+
+ if (loops == 0) loops = DEFAULT_LOOPS;
+ if (limit == 0) limit = DEFAULT_LIMIT;
+ if (threads == 0) threads = DEFAULT_THREADS;
+
+ if (debug_mode) printf(
+ "%s: Using loops = %d, threads = %d, limit = %d and %s threads\n",
+ programName, loops, threads, limit,
+ (thread_scope == PR_LOCAL_THREAD) ? "LOCAL" : "GLOBAL");
+
+ for (times = 0; times < loops; ++times)
+ {
+ if (debug_mode) printf("%s: Setting concurrency level to %d\n", programName, times + 1);
+ PR_SetConcurrency(times + 1);
+ for (active = 0; active < threads; active++)
+ {
+ hammer[active].ml = ml;
+ hammer[active].cv = cv;
+ hammer[active].id = id++;
+ hammer[active].writes = 0;
+ hammer[active].action = sg_go;
+ hammer[active].problem = sg_okay;
+ hammer[active].limit = (Random() % limit) + 1;
+ hammer[active].timein = PR_IntervalNow();
+ hammer[active].thread = PR_CreateThread(
+ PR_USER_THREAD, Thread, &hammer[active],
+ PR_GetThreadPriority(PR_GetCurrentThread()),
+ thread_scope, PR_JOINABLE_THREAD, 0);
+
+ PR_Lock(ml);
+ PR_WaitCondVar(cv, interleave); /* start new ones slowly */
+ PR_Unlock(ml);
+ }
+
+ /*
+ * The last thread started has had the opportunity to run for
+ * 'interleave' seconds. Now gather them all back in.
+ */
+ PR_Lock(ml);
+ for (poll = 0; poll < threads; poll++)
+ {
+ if (hammer[poll].action == sg_go) /* don't overwrite done */
+ hammer[poll].action = sg_stop; /* ask him to stop */
+ }
+ PR_Unlock(ml);
+
+ while (active > 0)
+ {
+ for (poll = 0; poll < threads; poll++)
+ {
+ PR_Lock(ml);
+ while (hammer[poll].action < sg_done)
+ PR_WaitCondVar(cv, PR_INTERVAL_NO_TIMEOUT);
+ PR_Unlock(ml);
+
+ active -= 1; /* this is another one down */
+ (void)PR_JoinThread(hammer[poll].thread);
+ hammer[poll].thread = NULL;
+ if (hammer[poll].problem == sg_okay)
+ {
+ duration = PR_IntervalToMilliseconds(
+ PR_IntervalNow() - hammer[poll].timein);
+ writes = hammer[poll].writes * 1000 / duration;
+ if (writes < writesMin)
+ writesMin = writes;
+ if (writes > writesMax)
+ writesMax = writes;
+ writesTot += hammer[poll].writes;
+ durationTot += duration;
+ }
+ else
+ if (debug_mode) printf(
+ "%s: test failed %s after %ld seconds\n",
+ programName, where[hammer[poll].problem], duration);
+ else failed_already=1;
+ }
+ }
+ }
+ if (debug_mode) printf(
+ "%s: [%ld [%ld] %ld] writes/sec average\n",
+ programName, writesMin, writesTot * 1000 / durationTot, writesMax);
+
+ PR_DestroyCondVar(cv);
+ PR_DestroyLock(ml);
+
+ if (failed_already)
+ {
+ printf("FAIL\n");
+ return 1;
+ }
+ else
+ {
+ printf("PASS\n");
+ return 0;
+ }
+} /* main */