diff options
Diffstat (limited to 'src/libs/xpcom18a4/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_arm.cpp')
| -rw-r--r-- | src/libs/xpcom18a4/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_arm.cpp | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_arm.cpp b/src/libs/xpcom18a4/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_arm.cpp new file mode 100644 index 00000000..1b2c5c67 --- /dev/null +++ b/src/libs/xpcom18a4/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_arm.cpp @@ -0,0 +1,220 @@ +/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is mozilla.org code. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either of the GNU General Public License Version 2 or later (the "GPL"), + * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* Platform specific code to invoke XPCOM methods on native objects */ + +#include "xptcprivate.h" + +#if !defined(LINUX) || !defined(__arm__) +#error "This code is for Linux ARM only. Check that it works on your system, too.\nBeware that this code is highly compiler dependent." +#endif + +// Remember that these 'words' are 32bit DWORDS + +static PRUint32 +invoke_count_words(PRUint32 paramCount, nsXPTCVariant* s) +{ + PRUint32 result = 0; + for(PRUint32 i = 0; i < paramCount; i++, s++) + { + if(s->IsPtrData()) + { + result++; + continue; + } + switch(s->type) + { + case nsXPTType::T_I8 : + case nsXPTType::T_I16 : + case nsXPTType::T_I32 : + result++; + break; + case nsXPTType::T_I64 : + result+=2; + break; + case nsXPTType::T_U8 : + case nsXPTType::T_U16 : + case nsXPTType::T_U32 : + result++; + break; + case nsXPTType::T_U64 : + result+=2; + break; + case nsXPTType::T_FLOAT : + result++; + break; + case nsXPTType::T_DOUBLE : + result+=2; + break; + case nsXPTType::T_BOOL : + case nsXPTType::T_CHAR : + case nsXPTType::T_WCHAR : + result++; + break; + default: + // all the others are plain pointer types + result++; + break; + } + } + return result; +} + +static void +invoke_copy_to_stack(PRUint32* d, PRUint32 paramCount, nsXPTCVariant* s) +{ + for(PRUint32 i = 0; i < paramCount; i++, d++, s++) + { + if(s->IsPtrData()) + { + *((void**)d) = s->ptr; + continue; + } + switch(s->type) + { + case nsXPTType::T_I8 : *((PRInt8*) d) = s->val.i8; break; + case nsXPTType::T_I16 : *((PRInt16*) d) = s->val.i16; break; + case nsXPTType::T_I32 : *((PRInt32*) d) = s->val.i32; break; + case nsXPTType::T_I64 : *((PRInt64*) d) = s->val.i64; d++; break; + case nsXPTType::T_U8 : *((PRUint8*) d) = s->val.u8; break; + case nsXPTType::T_U16 : *((PRUint16*)d) = s->val.u16; break; + case nsXPTType::T_U32 : *((PRUint32*)d) = s->val.u32; break; + case nsXPTType::T_U64 : *((PRUint64*)d) = s->val.u64; d++; break; + case nsXPTType::T_FLOAT : *((float*) d) = s->val.f; break; + case nsXPTType::T_DOUBLE : *((double*) d) = s->val.d; d++; break; + case nsXPTType::T_BOOL : *((PRBool*) d) = s->val.b; break; + case nsXPTType::T_CHAR : *((char*) d) = s->val.c; break; + case nsXPTType::T_WCHAR : *((wchar_t*) d) = s->val.wc; break; + default: + // all the others are plain pointer types + *((void**)d) = s->val.p; + break; + } + } +} + +extern "C" { + struct my_params_struct { + nsISupports* that; + PRUint32 Index; + PRUint32 Count; + nsXPTCVariant* params; + PRUint32 fn_count; + PRUint32 fn_copy; + }; +}; + +XPTC_PUBLIC_API(nsresult) +XPTC_InvokeByIndex(nsISupports* that, PRUint32 methodIndex, + PRUint32 paramCount, nsXPTCVariant* params) +{ + PRUint32 result; + struct my_params_struct my_params; + my_params.that = that; + my_params.Index = methodIndex; + my_params.Count = paramCount; + my_params.params = params; + my_params.fn_copy = (PRUint32) &invoke_copy_to_stack; + my_params.fn_count = (PRUint32) &invoke_count_words; + +/* This is to call a given method of class that. + * The parameters are in params, the number is in paramCount. + * The routine will issue calls to count the number of words + * required for argument passing and to copy the arguments to + * the stack. + * Since APCS passes the first 3 params in r1-r3, we need to + * load the first three words from the stack and correct the stack + * pointer (sp) in the appropriate way. This means: + * + * 1.) more than 3 arguments: load r1-r3, correct sp and remember No. + * of bytes left on the stack in r4 + * + * 2.) <= 2 args: load r1-r3 (we won't be causing a stack overflow I hope), + * restore sp as if nothing had happened and set the marker r4 to zero. + * + * Afterwards sp will be restored using the value in r4 (which is not a temporary register + * and will be preserved by the function/method called according to APCS [ARM Procedure + * Calling Standard]). + * + * !!! IMPORTANT !!! + * This routine makes assumptions about the vtable layout of the c++ compiler. It's implemented + * for arm-linux GNU g++ >= 2.8.1 (including egcs and gcc-2.95.[1-3])! + * + */ + + __asm__ __volatile__( + "ldr r1, [%1, #12] \n\t" /* prepare to call invoke_count_words */ + "ldr ip, [%1, #16] \n\t" /* r0=paramCount, r1=params */ + "ldr r0, [%1, #8] \n\t" + "mov lr, pc \n\t" /* call it... */ + "mov pc, ip \n\t" + "mov r4, r0, lsl #2 \n\t" /* This is the amount of bytes needed. */ + "sub sp, sp, r4 \n\t" /* use stack space for the args... */ + "mov r0, sp \n\t" /* prepare a pointer an the stack */ + "ldr r1, [%1, #8] \n\t" /* =paramCount */ + "ldr r2, [%1, #12] \n\t" /* =params */ + "ldr ip, [%1, #20] \n\t" /* =invoke_copy_to_stack */ + "mov lr, pc \n\t" /* copy args to the stack like the */ + "mov pc, ip \n\t" /* compiler would. */ + "ldr r0, [%1] \n\t" /* =that */ + "ldr r1, [r0, #0] \n\t" /* get that->vtable offset */ + "ldr r2, [%1, #4] \n\t" + "mov r2, r2, lsl #2 \n\t" /* a vtable_entry(x)=8 + (4 bytes * x) */ +#if defined(__GXX_ABI_VERSION) && __GXX_ABI_VERSION >= 100 /* G++ V3 ABI */ + "ldr ip, [r1, r2] \n\t" /* get method adress from vtable */ +#else /* non G++ V3 ABI */ + "add r2, r2, #8 \n\t" /* with this compilers */ + "ldr ip, [r1, r2] \n\t" /* get method adress from vtable */ +#endif + "cmp r4, #12 \n\t" /* more than 3 arguments??? */ + "ldmgtia sp!, {r1, r2, r3}\n\t" /* yes: load arguments for r1-r3 */ + "subgt r4, r4, #12 \n\t" /* and correct the stack pointer */ + "ldmleia sp, {r1, r2, r3}\n\t" /* no: load r1-r3 from stack */ + "addle sp, sp, r4 \n\t" /* and restore stack pointer */ + "movle r4, #0 \n\t" /* a mark for restoring sp */ + "ldr r0, [%1, #0] \n\t" /* get (self) */ + "mov lr, pc \n\t" /* call mathod */ + "mov pc, ip \n\t" + "add sp, sp, r4 \n\t" /* restore stack pointer */ + "mov %0, r0 \n\t" /* the result... */ + : "=r" (result) + : "r" (&my_params) + : "r0", "r1", "r2", "r3", "r4", "ip", "lr", "sp" + ); + + return result; +} |