From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- .../EFI/Firmware/NetworkPkg/HttpDxe/HttpImpl.h | 233 +++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100644 src/VBox/Devices/EFI/Firmware/NetworkPkg/HttpDxe/HttpImpl.h (limited to 'src/VBox/Devices/EFI/Firmware/NetworkPkg/HttpDxe/HttpImpl.h') diff --git a/src/VBox/Devices/EFI/Firmware/NetworkPkg/HttpDxe/HttpImpl.h b/src/VBox/Devices/EFI/Firmware/NetworkPkg/HttpDxe/HttpImpl.h new file mode 100644 index 00000000..b4cba939 --- /dev/null +++ b/src/VBox/Devices/EFI/Firmware/NetworkPkg/HttpDxe/HttpImpl.h @@ -0,0 +1,233 @@ +/** @file + The header files of implementation of EFI_HTTP_PROTOCOL protocol interfaces. + + Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.
+ (C) Copyright 2016 Hewlett Packard Enterprise Development LP
+ + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __EFI_HTTP_IMPL_H__ +#define __EFI_HTTP_IMPL_H__ + +#define HTTP_DEFAULT_PORT 80 +#define HTTP_END_OF_HDR_STR "\r\n\r\n" +#define HTTP_CRLF_STR "\r\n" +#define HTTP_VERSION_STR HTTP_VERSION +#define HTTP_VERSION_CRLF_STR " HTTP/1.1\r\n" +#define HTTP_ERROR_OR_NOT_SUPPORT_STATUS_CODE 300 + + +/** + Returns the operational parameters for the current HTTP child instance. + + The GetModeData() function is used to read the current mode data (operational + parameters) for this HTTP protocol instance. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[out] HttpConfigData Point to buffer for operational parameters of this + HTTP instance. It is the responsibility of the caller + to allocate the memory for HttpConfigData and + HttpConfigData->AccessPoint.IPv6Node/IPv4Node. In fact, + it is recommended to allocate sufficient memory to record + IPv6Node since it is big enough for all possibilities. + + @retval EFI_SUCCESS Operation succeeded. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + HttpConfigData is NULL. + HttpConfigData->AccessPoint.IPv4Node or + HttpConfigData->AccessPoint.IPv6Node is NULL. + @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been started. + +**/ +EFI_STATUS +EFIAPI +EfiHttpGetModeData ( + IN EFI_HTTP_PROTOCOL *This, + OUT EFI_HTTP_CONFIG_DATA *HttpConfigData + ); + +/** + Initialize or brutally reset the operational parameters for this EFI HTTP instance. + + The Configure() function does the following: + When HttpConfigData is not NULL Initialize this EFI HTTP instance by configuring + timeout, local address, port, etc. + When HttpConfigData is NULL, reset this EFI HTTP instance by closing all active + connections with remote hosts, canceling all asynchronous tokens, and flush request + and response buffers without informing the appropriate hosts. + + No other EFI HTTP function can be executed by this instance until the Configure() + function is executed and returns successfully. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] HttpConfigData Pointer to the configure data to configure the instance. + + @retval EFI_SUCCESS Operation succeeded. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + HttpConfigData->LocalAddressIsIPv6 is FALSE and + HttpConfigData->AccessPoint.IPv4Node is NULL. + HttpConfigData->LocalAddressIsIPv6 is TRUE and + HttpConfigData->AccessPoint.IPv6Node is NULL. + @retval EFI_ALREADY_STARTED Reinitialize this HTTP instance without calling + Configure() with NULL to reset it. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources when + executing Configure(). + @retval EFI_UNSUPPORTED One or more options in ConfigData are not supported + in the implementation. +**/ +EFI_STATUS +EFIAPI +EfiHttpConfigure ( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_CONFIG_DATA *HttpConfigData + ); + +/** + The Request() function queues an HTTP request to this HTTP instance. + + Similar to Transmit() function in the EFI TCP driver. When the HTTP request is sent + successfully, or if there is an error, Status in token will be updated and Event will + be signaled. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] Token Pointer to storage containing HTTP request token. + + @retval EFI_SUCCESS Outgoing data was processed. + @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been started. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_TIMEOUT Data was dropped out of the transmit or receive queue. + @retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources. + @retval EFI_UNSUPPORTED The HTTP method is not supported in current + implementation. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token->Message is NULL. + Token->Message->Body is not NULL, + Token->Message->BodyLength is non-zero, and + Token->Message->Data is NULL, but a previous call to + Request()has not been completed successfully. +**/ +EFI_STATUS +EFIAPI +EfiHttpRequest ( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_TOKEN *Token + ); + +/** + Abort an asynchronous HTTP request or response token. + + The Cancel() function aborts a pending HTTP request or response transaction. If + Token is not NULL and the token is in transmit or receive queues when it is being + cancelled, its Token->Status will be set to EFI_ABORTED and then Token->Event will + be signaled. If the token is not in one of the queues, which usually means that the + asynchronous operation has completed, EFI_NOT_FOUND is returned. If Token is NULL, + all asynchronous tokens issued by Request() or Response() will be aborted. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] Token Point to storage containing HTTP request or response + token. + + @retval EFI_SUCCESS Request and Response queues are successfully flushed. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_STARTED This instance hasn't been configured. + @retval EFI_NOT_FOUND The asynchronous request or response token is not + found. + @retval EFI_UNSUPPORTED The implementation does not support this function. +**/ +EFI_STATUS +EFIAPI +EfiHttpCancel ( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_TOKEN *Token + ); + +/** + The Response() function queues an HTTP response to this HTTP instance, similar to + Receive() function in the EFI TCP driver. When the HTTP response is received successfully, + or if there is an error, Status in token will be updated and Event will be signaled. + + The HTTP driver will queue a receive token to the underlying TCP instance. When data + is received in the underlying TCP instance, the data will be parsed and Token will + be populated with the response data. If the data received from the remote host + contains an incomplete or invalid HTTP header, the HTTP driver will continue waiting + (asynchronously) for more data to be sent from the remote host before signaling + Event in Token. + + It is the responsibility of the caller to allocate a buffer for Body and specify the + size in BodyLength. If the remote host provides a response that contains a content + body, up to BodyLength bytes will be copied from the receive buffer into Body and + BodyLength will be updated with the amount of bytes received and copied to Body. This + allows the client to download a large file in chunks instead of into one contiguous + block of memory. Similar to HTTP request, if Body is not NULL and BodyLength is + non-zero and all other fields are NULL or 0, the HTTP driver will queue a receive + token to underlying TCP instance. If data arrives in the receive buffer, up to + BodyLength bytes of data will be copied to Body. The HTTP driver will then update + BodyLength with the amount of bytes received and copied to Body. + + If the HTTP driver does not have an open underlying TCP connection with the host + specified in the response URL, Request() will return EFI_ACCESS_DENIED. This is + consistent with RFC 2616 recommendation that HTTP clients should attempt to maintain + an open TCP connection between client and host. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] Token Pointer to storage containing HTTP response token. + + @retval EFI_SUCCESS Allocation succeeded. + @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been + initialized. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token->Message->Headers is NULL. + Token->Message is NULL. + Token->Message->Body is not NULL, + Token->Message->BodyLength is non-zero, and + Token->Message->Data is NULL, but a previous call to + Response() has not been completed successfully. + @retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources. + @retval EFI_ACCESS_DENIED An open TCP connection is not present with the host + specified by response URL. +**/ +EFI_STATUS +EFIAPI +EfiHttpResponse ( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_TOKEN *Token + ); + +/** + The Poll() function can be used by network drivers and applications to increase the + rate that data packets are moved between the communication devices and the transmit + and receive queues. + + In some systems, the periodic timer event in the managed network driver may not poll + the underlying communications device fast enough to transmit and/or receive all data + packets without missing incoming packets or dropping outgoing packets. Drivers and + applications that are experiencing packet loss should try calling the Poll() function + more often. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + + @retval EFI_SUCCESS Incoming or outgoing data was processed. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_READY No incoming or outgoing data is processed. + @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been started. + +**/ +EFI_STATUS +EFIAPI +EfiHttpPoll ( + IN EFI_HTTP_PROTOCOL *This + ); + +extern EFI_HTTP_PROTOCOL mEfiHttpTemplate; + +#endif -- cgit v1.2.3