From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- src/VBox/Frontends/VirtualBox/nls/qt_ro.ts | 7643 ++++++++++++++++++++++++++++ 1 file changed, 7643 insertions(+) create mode 100644 src/VBox/Frontends/VirtualBox/nls/qt_ro.ts (limited to 'src/VBox/Frontends/VirtualBox/nls/qt_ro.ts') diff --git a/src/VBox/Frontends/VirtualBox/nls/qt_ro.ts b/src/VBox/Frontends/VirtualBox/nls/qt_ro.ts new file mode 100644 index 00000000..913fcba5 --- /dev/null +++ b/src/VBox/Frontends/VirtualBox/nls/qt_ro.ts @@ -0,0 +1,7643 @@ + + + + + CloseButton + + Close Tab + + + + + MAC_APPLICATION_MENU + + About %1 + + + + Preferences... + + + + Services + + + + Hide %1 + + + + Hide Others + + + + Show All + + + + Quit %1 + + + + + Print Device Input Slot + + Automatic + + + + + Print Device Output Bin + + Automatic + + + + + QAbstractSocket + + Socket operation timed out + + + + Operation on socket is not supported + + + + Host not found + + + + Connection refused + + + + Connection timed out + + + + Trying to connect while connection is in progress + + + + Socket is not connected + + + + Network unreachable + + + + + QAbstractSpinBox + + &Select All + + + + &Step up + + + + Step &down + + + + + QAccessibleActionInterface + + Press + + + + Increase + + + + Decrease + + + + ShowMenu + + + + SetFocus + + + + Toggle + + + + Scroll Left + + + + Scroll Right + + + + Scroll Up + + + + Scroll Down + + + + Previous Page + + + + Next Page + + + + Triggers the action + + + + Increase the value + + + + Decrease the value + + + + Shows the menu + + + + Sets the focus + + + + Toggles the state + + + + Scrolls to the left + + + + Scrolls to the right + + + + Scrolls up + + + + Scrolls down + + + + Goes back a page + + + + Goes to the next page + + + + + QAndroidPlatformTheme + + Yes + + + + Yes to All + + + + No + + + + No to All + + + + + QApplication + + Executable '%1' requires Qt %2, found Qt %3. + + + + Incompatible Qt Library Error + + + + + QCocoaMenuItem + + About + + + + Config + + + + Preference + + + + Options + + + + Setting + + + + Setup + + + + Quit + + + + Exit + + + + Cut + + + + Copy + + + + Paste + + + + Select All + + + + About Qt + + + + + QCocoaTheme + + Don't Save + + + + + QColorDialog + + Hu&e: + + + + &Sat: + + + + &Val: + + + + &Red: + + + + &Green: + + + + Bl&ue: + + + + A&lpha channel: + + + + &HTML: + + + + Cursor at %1, %2 +Press ESC to cancel + + + + Select Color + + + + &Basic colors + + + + &Custom colors + + + + &Add to Custom Colors + + + + &Pick Screen Color + + + + + QComboBox + + Open the combo box selection popup + + + + False + + + + True + + + + + QCommandLineParser + + Displays version information. + + + + Displays help on commandline options. + + + + Displays help including Qt specific options. + + + + Unknown option '%1'. + + + + Unknown options: %1. + + + + Missing value after '%1'. + + + + Unexpected value after '%1'. + + + + [options] + + + + Usage: %1 + + + + Options: + + + + Arguments: + + + + + QCoreApplication + + %1: key is empty + QSystemSemaphore + + + + %1: unable to make key + QSystemSemaphore + + + + %1: ftok failed + QSystemSemaphore + + + + + QCupsJobWidget + + Job + + + + Job Control + + + + Scheduled printing: + + + + Billing information: + + + + Job priority: + + + + Banner Pages + + + + End: + Banner page at end + + + + Start: + Banner page at start + + + + Print Immediately + + + + Hold Indefinitely + + + + Day (06:00 to 17:59) + + + + Night (18:00 to 05:59) + + + + Second Shift (16:00 to 23:59) + + + + Third Shift (00:00 to 07:59) + + + + Weekend (Saturday to Sunday) + + + + Specific Time + + + + None + CUPS Banner page + + + + Standard + CUPS Banner page + + + + Unclassified + CUPS Banner page + + + + Confidential + CUPS Banner page + + + + Classified + CUPS Banner page + + + + Secret + CUPS Banner page + + + + Top Secret + CUPS Banner page + + + + + QCupsPrinterSupport + + Authentication Needed + + + + Authentication needed to use %1. + + + + Authentication needed to use %1 on %2. + + + + Username: + + + + Password: + + + + + QDB2Driver + + Unable to connect + + + + Unable to commit transaction + + + + Unable to rollback transaction + + + + Unable to set autocommit + + + + + QDB2Result + + Unable to execute statement + + + + Unable to prepare statement + + + + Unable to bind variable + + + + Unable to fetch record %1 + + + + Unable to fetch next + + + + Unable to fetch first + + + + + QDBusTrayIcon + + OK + + + + + QDateTimeParser + + AM + + + + am + + + + PM + + + + pm + + + + + QDialog + + What's This? + + + + + QDialogButtonBox + + OK + + + + + QDirModel + + Name + + + + Size + + + + Kind + Match OS X Finder + + + + Type + All other platforms + + + + Date Modified + + + + + QDnsLookup + + Operation cancelled + + + + + QDnsLookupRunnable + + IPv6 addresses for nameservers are currently not supported + + + + Invalid domain name + + + + Not yet supported on Android + + + + Resolver functions not found + + + + Resolver initialization failed + + + + Server could not process query + + + + Server failure + + + + Non existent domain + + + + Server refused to answer + + + + Invalid reply received + + + + Could not expand domain name + + + + Invalid IPv4 address record + + + + Invalid IPv6 address record + + + + Invalid canonical name record + + + + Invalid name server record + + + + Invalid pointer record + + + + Invalid mail exchange record + + + + Invalid service record + + + + Invalid text record + + + + Resolver library can't be loaded: No runtime library loading support + + + + No hostname given + + + + Invalid hostname + + + + Host %1 could not be found. + + + + Unknown error + + + + + QDockWidget + + Float + Accessible name for button undocking a dock widget (floating state) + + + + Undocks and re-attaches the dock widget + + + + Close + Accessible name for button closing a dock widget + + + + Closes the dock widget + + + + + QDomParser + + Error occurred while processing XML declaration + + + + Multiple DTD sections are not allowed + + + + Error occurred while processing document type declaration + + + + Error occurred while processing comment + + + + Error occurred while processing a processing instruction + + + + Error occurred while processing a start element + + + + Unexpected end element '%1' + + + + Error occurred while processing an end element + + + + Error occurred while processing the element content + + + + Error occurred while processing comments + + + + Error occurred while processing an entity reference + + + + Unexpected token + + + + Tag mismatch + + + + Error occurred while processing entity declaration + + + + Error occurred while processing notation declaration + + + + + QDtls + + Invalid (empty) secret + + + + Multicast and broadcast addresses are not supported + + + + Cannot set peer after handshake started + + + + Invalid address + + + + Cannot set verification name after handshake started + + + + Cannot set configuration after handshake started + + + + Cannot start/continue handshake, invalid handshake state + + + + Invalid (nullptr) socket + + + + To start a handshake you must set peer's address and port first + + + + To start a handshake, DTLS server requires non-empty datagram (client hello) + + + + Cannot start handshake, already done/in progress + + + + A valid QUdpSocket and non-empty datagram are needed to continue the handshake + + + + Cannot continue handshake, not in InProgress state + + + + Cannot resume, not in VerificationError state + + + + No handshake in progress, nothing to abort + + + + Cannot send shutdown alert, not encrypted + + + + Cannot write a datagram, not in encrypted state + + + + Cannot read a datagram, not in encrypted state + + + + %1 failed + %1: Some function + + + + Invalid SslMode, SslServerMode or SslClientMode expected + + + + Invalid protocol version, DTLS protocol expected + + + + BIO_ADD_new failed, cannot start handshake + + + + Cannot start the handshake, verified client hello expected + + + + Peer verification failed + + + + The DTLS connection has been closed + + + + Error while writing: %1 + + + + The DTLS connection has been shutdown + + + + Error while reading: %1 + + + + + QDtlsClientVerifier + + A valid UDP socket, non-empty datagram, valid address/port were expected + + + + BIO_ADDR_new failed, ignoring client hello + + + + + QErrorMessage + + Debug Message: + + + + Warning: + + + + Critical Error: + + + + Fatal Error: + + + + Information: + + + + &Show this message again + + + + &OK + + + + + QFile + + Destination file is the same file. + + + + Source file does not exist. + + + + Destination file exists + + + + Error while renaming: %1 + + + + Unable to restore from %1: %2 + + + + Will not rename sequential file using block copy + + + + Cannot remove source file + + + + Cannot open destination file: %1 + + + + Cannot open %1 for input + + + + Cannot open for output: %1 + + + + Failure to write block + + + + Cannot create %1 for output + + + + + QFileDevice + + No file engine available or engine does not support UnMapExtension + + + + No file engine available + + + + + QFileDialog + + All Files (*) + + + + Look in: + + + + Back + + + + Go back + + + + Alt+Left + + + + Forward + + + + Go forward + + + + Alt+Right + + + + Parent Directory + + + + Go to the parent directory + + + + Alt+Up + + + + Create New Folder + + + + Create a New Folder + + + + List View + + + + Change to list view mode + + + + Detail View + + + + Change to detail view mode + + + + Sidebar + + + + List of places and bookmarks + + + + Files + + + + Files of type: + + + + Find Directory + + + + Open + + + + Save As + + + + Directory: + + + + File &name: + + + + &Open + + + + &Choose + + + + &Save + + + + Show + + + + &Rename + + + + &Delete + + + + Show &hidden files + + + + &New Folder + + + + All files (*) + + + + Directories + + + + %1 +Directory not found. +Please verify the correct directory name was given. + + + + %1 already exists. +Do you want to replace it? + + + + %1 +File not found. +Please verify the correct file name was given. + + + + New Folder + + + + Delete + + + + '%1' is write protected. +Do you want to delete it anyway? + + + + Are you sure you want to delete '%1'? + + + + Could not delete directory. + + + + Recent Places + + + + Remove + + + + My Computer + + + + Drive + + + + %1 File + %1 is a file name suffix, for example txt + + + + File + + + + File Folder + Match Windows Explorer + + + + Folder + All other platforms + + + + Alias + OS X Finder + + + + Shortcut + All other platforms + + + + Unknown + + + + + QFileSystemModel + + <b>The name "%1" cannot be used.</b><p>Try using another name, with fewer characters or no punctuation marks. + + + + Invalid filename + + + + Name + + + + Size + + + + Kind + Match OS X Finder + + + + Type + All other platforms + + + + Date Modified + + + + My Computer + + + + Computer + + + + + QFontDatabase + + Normal + The Normal or Regular font weight + + + + Bold + + + + Demi Bold + + + + Medium + The Medium font weight + + + + Black + + + + Light + + + + Thin + + + + Extra Light + + + + Extra Bold + + + + Extra + The word for "Extra" as in "Extra Bold, Extra Thin" used as a pattern for string searches + + + + Demi + The word for "Demi" as in "Demi Bold" used as a pattern for string searches + + + + Italic + + + + Oblique + + + + Any + + + + Latin + + + + Greek + + + + Cyrillic + + + + Armenian + + + + Hebrew + + + + Arabic + + + + Syriac + + + + Thaana + + + + Devanagari + + + + Bengali + + + + Gurmukhi + + + + Gujarati + + + + Oriya + + + + Tamil + + + + Telugu + + + + Kannada + + + + Malayalam + + + + Sinhala + + + + Thai + + + + Lao + + + + Tibetan + + + + Myanmar + + + + Georgian + + + + Khmer + + + + Simplified Chinese + + + + Traditional Chinese + + + + Japanese + + + + Korean + + + + Vietnamese + + + + Symbol + + + + Ogham + + + + Runic + + + + N'Ko + + + + + QFontDialog + + Select Font + + + + &Font + + + + Font st&yle + + + + &Size + + + + Effects + + + + Stri&keout + + + + &Underline + + + + Sample + + + + Wr&iting System + + + + + QFtp + + Not connected + + + + Host %1 not found + + + + Connection refused to host %1 + + + + Connection timed out to host %1 + + + + Connected to host %1 + + + + Data Connection refused + + + + Unknown error + + + + Connecting to host failed: +%1 + + + + Login failed: +%1 + + + + Listing directory failed: +%1 + + + + Changing directory failed: +%1 + + + + Downloading file failed: +%1 + + + + Uploading file failed: +%1 + + + + Removing file failed: +%1 + + + + Creating directory failed: +%1 + + + + Removing directory failed: +%1 + + + + Connection closed + + + + + QGnomeTheme + + &OK + + + + &Save + + + + &Cancel + + + + &Close + + + + Close without Saving + + + + + QGuiApplication + + QT_LAYOUT_DIRECTION + Translate this string to the string 'LTR' in left-to-right languages or to 'RTL' in right-to-left languages (such as Hebrew and Arabic) to get proper widget layout. + + + + QPA plugin. See QGuiApplication documentation for available options for each plugin. + + + + Path to the platform plugins. + + + + Platform theme. + + + + Additional plugins to load, can be specified multiple times. + + + + Window geometry for the main window, using the X11-syntax, like 100x100+50+50. + + + + Default window icon. + + + + Title of the first window. + + + + Sets the application's layout direction to Qt::RightToLeft (debugging helper). + + + + Restores the application from an earlier session. + + + + Display name, overrides $DISPLAY. + + + + Instance name according to ICCCM 4.1.2.5. + + + + Disable mouse grabbing (useful in debuggers). + + + + Force mouse grabbing (even when running in a debugger). + + + + ID of the X11 Visual to use. + + + + Alias for --windowgeometry. + + + + Alias for --windowicon. + + + + Alias for --windowtitle. + + + + + QHostInfo + + No host name given + + + + Unknown error + + + + + QHostInfoAgent + + No host name given + + + + Invalid hostname + + + + Unknown address type + + + + Host not found + + + + + QHttp + + Connection closed + + + + Host %1 not found + + + + Connection refused + + + + Proxy requires authentication + + + + Host requires authentication + + + + Data corrupted + + + + Unknown protocol specified + + + + SSL handshake failed + + + + Too many redirects + + + + Insecure redirect + + + + + QHttpSocketEngine + + Did not receive HTTP response from proxy + + + + Error parsing authentication request from proxy + + + + Authentication required + + + + Proxy denied connection + + + + Error communicating with HTTP proxy + + + + Proxy server not found + + + + Proxy connection refused + + + + Proxy server connection timed out + + + + Proxy connection closed prematurely + + + + + QIBaseDriver + + Error opening database + + + + Could not start transaction + + + + Unable to commit transaction + + + + Unable to rollback transaction + + + + + QIBaseResult + + Unable to create BLOB + + + + Unable to write BLOB + + + + Unable to open BLOB + + + + Unable to read BLOB + + + + Could not find array + + + + Could not get array data + + + + Could not get query info + + + + Could not start transaction + + + + Unable to commit transaction + + + + Could not allocate statement + + + + Could not prepare statement + + + + Could not describe input statement + + + + Could not describe statement + + + + Unable to close statement + + + + Unable to execute query + + + + Could not fetch next item + + + + Could not get statement info + + + + + QIODevice + + file to open is a directory + + + + Unknown error + + + + Permission denied + + + + Too many open files + + + + No such file or directory + + + + No space left on device + + + + + QImageReader + + Invalid device + + + + File not found + + + + Unsupported image format + + + + Unable to read image data + + + + Unknown error + + + + + QImageWriter + + Unknown error + + + + Device is not set + + + + Cannot open device for writing: %1 + + + + Device not writable + + + + Unsupported image format + + + + Image is empty + + + + + QInputDialog + + Enter a value: + + + + + QJsonParseError + + no error occurred + + + + unterminated object + + + + missing name separator + + + + unterminated array + + + + missing value separator + + + + illegal value + + + + invalid termination by number + + + + illegal number + + + + invalid escape sequence + + + + invalid UTF8 string + + + + unterminated string + + + + object is missing after a comma + + + + too deeply nested document + + + + too large document + + + + garbage at the end of the document + + + + + QKeySequenceEdit + + Press shortcut + + + + %1, ... + This text is an "unfinished" shortcut, expands like "Ctrl+A, ..." + + + + + QLibrary + + '%1' is not an ELF object (%2) + + + + file too small + + + + '%1' is not an ELF object + + + + '%1' is an invalid ELF object (%2) + + + + odd cpu architecture + + + + wrong cpu architecture + + + + odd endianness + + + + unexpected e_shsize + + + + unexpected e_shentsize + + + + announced %n section(s), each %1 byte(s), exceed file size + + + + + + + + shstrtab section header seems to be at %1 + + + + string table seems to be at %1 + + + + section name %1 of %2 behind end of file + + + + empty .rodata. not a library. + + + + missing section data. This is not a library. + + + + Failed to extract plugin meta data from '%1' + + + + The shared library was not found. + + + + The file '%1' is not a valid Qt plugin. + + + + The plugin '%1' uses incompatible Qt library. (%2.%3.%4) [%5] + + + + The plugin '%1' uses incompatible Qt library. (Cannot mix debug and release libraries.) + + + + Unknown error + + + + Cannot load library %1: %2 + + + + Cannot unload library %1: %2 + + + + '%1' is not a valid Mach-O binary (%2) + + + + file is corrupt + + + + no suitable architecture in fat binary + + + + invalid magic %1 + + + + wrong architecture + + + + not a dynamic library + + + + '%1' is not a Qt plugin + + + + + QLineEdit + + &Undo + + + + &Redo + + + + Cu&t + + + + &Copy + + + + &Paste + + + + Delete + + + + Select All + + + + + QLocalServer + + %1: Name error + + + + %1: Permission denied + + + + %1: Address in use + + + + %1: Unknown error %2 + + + + + QLocalSocket + + %1: Connection refused + + + + %1: Remote closed + + + + %1: Invalid name + + + + %1: Socket access error + + + + %1: Socket resource error + + + + %1: Socket operation timed out + + + + %1: Datagram too large + + + + %1: Connection error + + + + %1: The socket operation is not supported + + + + %1: Operation not permitted when socket is in this state + + + + %1: Unknown error + + + + Trying to connect while connection is in progress + + + + %1: Unknown error %2 + + + + %1: Access denied + + + + Socket is not connected + + + + + QMYSQLDriver + + Unable to allocate a MYSQL object + + + + Unable to open database '%1' + + + + Unable to connect + + + + Unable to begin transaction + + + + Unable to commit transaction + + + + Unable to rollback transaction + + + + + QMYSQLResult + + Unable to fetch data + + + + Unable to execute query + + + + Unable to store result + + + + Unable to execute next query + + + + Unable to store next result + + + + Unable to prepare statement + + + + Unable to reset statement + + + + Unable to bind value + + + + Unable to execute statement + + + + Unable to bind outvalues + + + + Unable to store statement results + + + + + QMdiArea + + (Untitled) + + + + + QMdiSubWindow + + - [%1] + + + + %1 - [%2] + + + + Minimize + + + + Maximize + + + + Unshade + + + + Shade + + + + Restore Down + + + + Restore + + + + Close + + + + Help + + + + Menu + + + + &Restore + + + + &Move + + + + &Size + + + + Mi&nimize + + + + Ma&ximize + + + + Stay on &Top + + + + &Close + + + + + QMessageBox + + Show Details... + + + + Hide Details... + + + + <h3>About Qt</h3><p>This program uses Qt version %1.</p> + + + + <p>Qt is a C++ toolkit for cross-platform application development.</p><p>Qt provides single-source portability across all major desktop operating systems. It is also available for embedded Linux and other embedded and mobile operating systems.</p><p>Qt is available under multiple licensing options designed to accommodate the needs of our various users.</p><p>Qt licensed under our commercial license agreement is appropriate for development of proprietary/commercial software where you do not want to share any source code with third parties or otherwise cannot comply with the terms of GNU (L)GPL.</p><p>Qt licensed under GNU (L)GPL is appropriate for the development of Qt&nbsp;applications provided you can comply with the terms and conditions of the respective licenses.</p><p>Please see <a href="http://%2/">%2</a> for an overview of Qt licensing.</p><p>Copyright (C) %1 The Qt Company Ltd and other contributors.</p><p>Qt and the Qt logo are trademarks of The Qt Company Ltd.</p><p>Qt is The Qt Company Ltd product developed as an open source project. See <a href="http://%3/">%3</a> for more information.</p> + Leave this text untranslated or include a verbatim copy of it below and note that it is the authoritative version in case of doubt. + + + + About Qt + + + + + QNativeSocketEngine + + Unable to initialize non-blocking socket + + + + Unable to initialize broadcast socket + + + + Attempt to use IPv6 socket on a platform with no IPv6 support + + + + The remote host closed the connection + + + + Network operation timed out + + + + Out of resources + + + + Unsupported socket operation + + + + Protocol type not supported + + + + Invalid socket descriptor + + + + Host unreachable + + + + Network unreachable + + + + Permission denied + + + + Connection timed out + + + + Connection refused + + + + The bound address is already in use + + + + The address is not available + + + + The address is protected + + + + Datagram was too large to send + + + + Unable to send a message + + + + Unable to receive a message + + + + Unable to write + + + + Network error + + + + Another socket is already listening on the same port + + + + Operation on non-socket + + + + The proxy type is invalid for this operation + + + + Temporary error + + + + Network dropped connection on reset + + + + Connection reset by peer + + + + Unknown error + + + + + QNetworkAccessCacheBackend + + Error opening %1 + + + + + QNetworkAccessDataBackend + + Invalid URI: %1 + + + + + QNetworkAccessDebugPipeBackend + + Write error writing to %1: %2 + + + + Socket error on %1: %2 + + + + Remote host closed the connection prematurely on %1 + + + + + QNetworkAccessFileBackend + + Request for opening non-local file %1 + + + + Error opening %1: %2 + + + + Write error writing to %1: %2 + + + + Cannot open %1: Path is a directory + + + + Read error reading from %1: %2 + + + + + QNetworkAccessFtpBackend + + No suitable proxy found + + + + Cannot open %1: is a directory + + + + Logging in to %1 failed: authentication required + + + + Error while downloading %1: %2 + + + + Error while uploading %1: %2 + + + + + QNetworkReply + + Error transferring %1 - server replied: %2 + + + + Network session error. + + + + Background request not allowed. + + + + backend start error. + + + + Temporary network failure. + + + + Protocol "%1" is unknown + + + + + QNetworkReplyHttpImpl + + Operation canceled + + + + No suitable proxy found + + + + + QNetworkReplyImpl + + Operation canceled + + + + + QNetworkSession + + Invalid configuration. + + + + + QNetworkSessionPrivateImpl + + Unknown session error. + + + + The session was aborted by the user or system. + + + + The requested operation is not supported by the system. + + + + The specified configuration cannot be used. + + + + Roaming was aborted or is not possible. + + + + + QOCIDriver + + Unable to initialize + QOCIDriver + + + + Unable to logon + + + + Unable to begin transaction + + + + Unable to commit transaction + + + + Unable to rollback transaction + + + + + QOCIResult + + Unable to bind column for batch execute + + + + Unable to execute batch statement + + + + Unable to goto next + + + + Unable to alloc statement + + + + Unable to prepare statement + + + + Unable to get statement type + + + + Unable to bind value + + + + Unable to execute statement + + + + + QODBCDriver + + Unable to connect + + + + Unable to connect - Driver doesn't support all functionality required + + + + Unable to disable autocommit + + + + Unable to commit transaction + + + + Unable to rollback transaction + + + + Unable to enable autocommit + + + + + QODBCResult + + QODBCResult::reset: Unable to set 'SQL_CURSOR_STATIC' as statement attribute. Please check your ODBC driver configuration + + + + Unable to execute statement + + + + Unable to fetch + + + + Unable to fetch next + + + + Unable to fetch first + + + + Unable to fetch previous + + + + Unable to fetch last + + + + Unable to prepare statement + + + + Unable to bind variable + + + + + QPSQLDriver + + Unable to connect + + + + Could not begin transaction + + + + Could not commit transaction + + + + Could not rollback transaction + + + + Unable to subscribe + + + + Unable to unsubscribe + + + + + QPSQLResult + + Query results lost - probably discarded on executing another SQL query. + + + + Unable to create query + + + + Unable to get result + + + + Unable to send query + + + + Unable to prepare statement + + + + + QPageSetupWidget + + Form + + + + Paper + + + + Page size: + + + + Width: + + + + Height: + + + + Paper source: + + + + Orientation + + + + Portrait + + + + Landscape + + + + Reverse landscape + + + + Reverse portrait + + + + Margins + + + + top margin + + + + left margin + + + + right margin + + + + bottom margin + + + + Page Layout + + + + Page order: + + + + Pages per sheet: + + + + Millimeters (mm) + + + + Inches (in) + + + + Points (pt) + + + + Pica (P̸) + + + + Didot (DD) + + + + Cicero (CC) + + + + Custom + + + + mm + Unit 'Millimeter' + + + + pt + Unit 'Points' + + + + in + Unit 'Inch' + + + + P̸ + Unit 'Pica' + + + + DD + Unit 'Didot' + + + + CC + Unit 'Cicero' + + + + + QPageSize + + Custom (%1mm x %2mm) + Custom size name in millimeters + + + + Custom (%1pt x %2pt) + Custom size name in points + + + + Custom (%1in x %2in) + Custom size name in inches + + + + Custom (%1pc x %2pc) + Custom size name in picas + + + + Custom (%1DD x %2DD) + Custom size name in didots + + + + Custom (%1CC x %2CC) + Custom size name in ciceros + + + + %1 x %2 in + Page size in 'Inch'. + + + + A0 + + + + A1 + + + + A2 + + + + A3 + + + + A4 + + + + A5 + + + + A6 + + + + A7 + + + + A8 + + + + A9 + + + + A10 + + + + B0 + + + + B1 + + + + B2 + + + + B3 + + + + B4 + + + + B5 + + + + B6 + + + + B7 + + + + B8 + + + + B9 + + + + B10 + + + + Executive (7.5 x 10 in) + + + + Executive (7.25 x 10.5 in) + + + + Folio (8.27 x 13 in) + + + + Legal + + + + Letter / ANSI A + + + + Tabloid / ANSI B + + + + Ledger / ANSI B + + + + Custom + + + + A3 Extra + + + + A4 Extra + + + + A4 Plus + + + + A4 Small + + + + A5 Extra + + + + B5 Extra + + + + JIS B0 + + + + JIS B1 + + + + JIS B2 + + + + JIS B3 + + + + JIS B4 + + + + JIS B5 + + + + JIS B6 + + + + JIS B7 + + + + JIS B8 + + + + JIS B9 + + + + JIS B10 + + + + ANSI C + + + + ANSI D + + + + ANSI E + + + + Legal Extra + + + + Letter Extra + + + + Letter Plus + + + + Letter Small + + + + Tabloid Extra + + + + Architect A + + + + Architect B + + + + Architect C + + + + Architect D + + + + Architect E + + + + Note + + + + Quarto + + + + Statement + + + + Super A + + + + Super B + + + + Postcard + + + + Double Postcard + + + + PRC 16K + + + + PRC 32K + + + + PRC 32K Big + + + + Fan-fold US (14.875 x 11 in) + + + + Fan-fold German (8.5 x 12 in) + + + + Fan-fold German Legal (8.5 x 13 in) + + + + Envelope B4 + + + + Envelope B5 + + + + Envelope B6 + + + + Envelope C0 + + + + Envelope C1 + + + + Envelope C2 + + + + Envelope C3 + + + + Envelope C4 + + + + Envelope C5 + + + + Envelope C6 + + + + Envelope C65 + + + + Envelope C7 + + + + Envelope DL + + + + Envelope US 9 + + + + Envelope US 10 + + + + Envelope US 11 + + + + Envelope US 12 + + + + Envelope US 14 + + + + Envelope Monarch + + + + Envelope Personal + + + + Envelope Chou 3 + + + + Envelope Chou 4 + + + + Envelope Invite + + + + Envelope Italian + + + + Envelope Kaku 2 + + + + Envelope Kaku 3 + + + + Envelope PRC 1 + + + + Envelope PRC 2 + + + + Envelope PRC 3 + + + + Envelope PRC 4 + + + + Envelope PRC 5 + + + + Envelope PRC 6 + + + + Envelope PRC 7 + + + + Envelope PRC 8 + + + + Envelope PRC 9 + + + + Envelope PRC 10 + + + + Envelope You 4 + + + + + QPlatformTheme + + OK + + + + Save + + + + Save All + + + + Open + + + + &Yes + + + + Yes to &All + + + + &No + + + + N&o to All + + + + Abort + + + + Retry + + + + Ignore + + + + Close + + + + Cancel + + + + Discard + + + + Help + + + + Apply + + + + Reset + + + + Restore Defaults + + + + + QPluginLoader + + The plugin was not loaded. + + + + Unknown error + + + + + QPrintDialog + + Print + + + + Left to Right, Top to Bottom + + + + Left to Right, Bottom to Top + + + + Right to Left, Bottom to Top + + + + Right to Left, Top to Bottom + + + + Bottom to Top, Left to Right + + + + Bottom to Top, Right to Left + + + + Top to Bottom, Left to Right + + + + Top to Bottom, Right to Left + + + + 1 (1x1) + + + + 2 (2x1) + + + + 4 (2x2) + + + + 6 (2x3) + + + + 9 (3x3) + + + + 16 (4x4) + + + + All Pages + + + + Odd Pages + + + + Even Pages + + + + &Options >> + + + + &Print + + + + &Options << + + + + Invalid Pages Definition + + + + %1 does not follow the correct syntax. Please use ',' to separate ranges and pages, '-' to define ranges and make sure ranges do not intersect with each other. + + + + Duplex Settings Conflicts + + + + There are conflicts in duplex settings. Do you want to fix them? + + + + Print to File (PDF) + + + + Local file + + + + Write PDF file + + + + Print To File ... + + + + %1 is a directory. +Please choose a different file name. + + + + File %1 is not writable. +Please choose a different file name. + + + + %1 already exists. +Do you want to overwrite it? + + + + Options 'Pages Per Sheet' and 'Page Set' cannot be used together. +Please turn one of those options off. + + + + The 'From' value cannot be greater than the 'To' value. + + + + OK + + + + + QPrintPreviewDialog + + Page Setup + + + + %1% + + + + Print Preview + + + + Next page + + + + Previous page + + + + First page + + + + Last page + + + + Fit width + + + + Fit page + + + + Zoom in + + + + Zoom out + + + + Portrait + + + + Landscape + + + + Show single page + + + + Show facing pages + + + + Show overview of all pages + + + + Print + + + + Page setup + + + + Export to PDF + + + + + QPrintPropertiesDialog + + Printer Properties + + + + Job Options + + + + Page Setup Conflicts + + + + There are conflicts in page setup options. Do you want to fix them? + + + + Advanced Option Conflicts + + + + There are conflicts in some advanced options. Do you want to fix them? + + + + + QPrintPropertiesWidget + + Form + + + + Page + + + + Advanced + + + + There are conflicts in some options. Please fix them. + + + + + QPrintSettingsOutput + + Form + + + + Copies + + + + Print range + + + + Print all + + + + Pages from + + + + to + + + + Pages + + + + Specify pages or ranges separated by commas. Ranges are specified by two numbers separated by a hyphen. E.g: 3,5-7,9 prints pages 3, 5, 6, 7 and 9. + + + + Current Page + + + + Selection + + + + Page Set: + + + + Output Settings + + + + Copies: + + + + Collate + + + + Reverse + + + + Options + + + + Color Mode + + + + Color + + + + Grayscale + + + + Double Sided Printing + + + + Off + + + + Long side binding + + + + Short side binding + + + + + QPrintWidget + + Form + + + + Printer + + + + &Name: + + + + P&roperties + + + + Location: + + + + Preview + + + + Type: + + + + Output &file: + + + + ... + + + + + QProcess + + Process failed to start + + + + Process crashed + + + + Process operation timed out + + + + Error reading from process + + + + Error writing to process + + + + No program defined + + + + Could not open input redirection for reading + + + + Resource error (fork failure): %1 + + + + Could not open output redirection for writing + + + + Process failed to start: %1 + + + + + QProgressDialog + + Cancel + + + + + QRegExp + + no error occurred + + + + disabled feature used + + + + bad char class syntax + + + + bad lookahead syntax + + + + lookbehinds not supported, see QTBUG-2371 + + + + bad repetition syntax + + + + invalid octal value + + + + missing left delim + + + + unexpected end + + + + met internal limit + + + + invalid interval + + + + invalid category + + + + + QRegularExpression + + no error + + + + \ at end of pattern + + + + \c at end of pattern + + + + unrecognized character follows \ + + + + numbers out of order in {} quantifier + + + + number too big in {} quantifier + + + + missing terminating ] for character class + + + + escape sequence is invalid in character class + + + + range out of order in character class + + + + quantifier does not follow a repeatable item + + + + internal error: unexpected repeat + + + + unrecognized character after (? or (?- + + + + POSIX named classes are supported only within a class + + + + POSIX collating elements are not supported + + + + missing closing parenthesis + + + + reference to non-existent subpattern + + + + pattern passed as NULL + + + + unrecognised compile-time option bit(s) + + + + missing ) after (?# comment + + + + parentheses are too deeply nested + + + + regular expression is too large + + + + failed to allocate heap memory + + + + unmatched closing parenthesis + + + + internal error: code overflow + + + + missing closing parenthesis for condition + + + + lookbehind assertion is not fixed length + + + + a relative value of zero is not allowed + + + + conditional subpattern contains more than two branches + + + + assertion expected after (?( or (?(?C) + + + + digit expected after (?+ or (?- + + + + unknown POSIX class name + + + + internal error in pcre2_study(): should not occur + + + + this version of PCRE2 does not have Unicode support + + + + parentheses are too deeply nested (stack check) + + + + character code point value in \x{} or \o{} is too large + + + + lookbehind is too complicated + + + + \C is not allowed in a lookbehind assertion in UTF-16 mode + + + + PCRE2 does not support \F, \L, \l, \N{name}, \U, or \u + + + + number after (?C is greater than 255 + + + + closing parenthesis for (?C expected + + + + invalid escape sequence in (*VERB) name + + + + unrecognized character after (?P + + + + syntax error in subpattern name (missing terminator?) + + + + two named subpatterns have the same name (PCRE2_DUPNAMES not set) + + + + subpattern name must start with a non-digit + + + + this version of PCRE2 does not have support for \P, \p, or \X + + + + malformed \P or \p sequence + + + + unknown property name after \P or \p + + + + subpattern name is too long (maximum 32 code units) + + + + too many named subpatterns (maximum 10000) + + + + invalid range in character class + + + + octal value is greater than \377 in 8-bit non-UTF-8 mode + + + + internal error: overran compiling workspace + + + + internal error: previously-checked referenced subpattern not found + + + + DEFINE subpattern contains more than one branch + + + + missing opening brace after \o + + + + internal error: unknown newline setting + + + + \g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number + + + + (?R (recursive pattern call) must be followed by a closing parenthesis + + + + obsolete error (should not occur) + + + + (*VERB) not recognized or malformed + + + + subpattern number is too big + + + + subpattern name expected + + + + internal error: parsed pattern overflow + + + + non-octal character in \o{} (closing brace missing?) + + + + different names for subpatterns of the same number are not allowed + + + + (*MARK) must have an argument + + + + non-hex character in \x{} (closing brace missing?) + + + + \c must be followed by a printable ASCII character + + + + \c must be followed by a letter or one of [\]^_? + + + + \k is not followed by a braced, angle-bracketed, or quoted name + + + + internal error: unknown meta code in check_lookbehinds() + + + + \N is not supported in a class + + + + callout string is too long + + + + disallowed Unicode code point (>= 0xd800 && <= 0xdfff) + + + + using UTF is disabled by the application + + + + using UCP is disabled by the application + + + + name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN) + + + + character code point value in \u.... sequence is too large + + + + digits missing in \x{} or \o{} or \N{U+} + + + + syntax error or number too big in (?(VERSION condition + + + + internal error: unknown opcode in auto_possessify() + + + + missing terminating delimiter for callout with string argument + + + + unrecognized string delimiter follows (?C + + + + using \C is disabled by the application + + + + (?| and/or (?J: or (?x: parentheses are too deeply nested + + + + using \C is disabled in this PCRE2 library + + + + regular expression is too complicated + + + + lookbehind assertion is too long + + + + pattern string is longer than the limit set by the application + + + + internal error: unknown code in parsed pattern + + + + internal error: bad code value in parsed_skip() + + + + PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is not allowed in UTF-16 mode + + + + invalid option bits with PCRE2_LITERAL + + + + \N{U+dddd} is supported only in Unicode (UTF) mode + + + + invalid hyphen in option setting + + + + (*alpha_assertion) not recognized + + + + script runs require Unicode support, which this version of PCRE2 does not have + + + + too many capturing groups (maximum 65535) + + + + atomic assertion expected after (?( or (?(?C) + + + + no match + + + + partial match + + + + UTF-8 error: 1 byte missing at end + + + + UTF-8 error: 2 bytes missing at end + + + + UTF-8 error: 3 bytes missing at end + + + + UTF-8 error: 4 bytes missing at end + + + + UTF-8 error: 5 bytes missing at end + + + + UTF-8 error: byte 2 top bits not 0x80 + + + + UTF-8 error: byte 3 top bits not 0x80 + + + + UTF-8 error: byte 4 top bits not 0x80 + + + + UTF-8 error: byte 5 top bits not 0x80 + + + + UTF-8 error: byte 6 top bits not 0x80 + + + + UTF-8 error: 5-byte character is not allowed (RFC 3629) + + + + UTF-8 error: 6-byte character is not allowed (RFC 3629) + + + + UTF-8 error: code points greater than 0x10ffff are not defined + + + + UTF-8 error: code points 0xd800-0xdfff are not defined + + + + UTF-8 error: overlong 2-byte sequence + + + + UTF-8 error: overlong 3-byte sequence + + + + UTF-8 error: overlong 4-byte sequence + + + + UTF-8 error: overlong 5-byte sequence + + + + UTF-8 error: overlong 6-byte sequence + + + + UTF-8 error: isolated byte with 0x80 bit set + + + + UTF-8 error: illegal byte (0xfe or 0xff) + + + + UTF-16 error: missing low surrogate at end + + + + UTF-16 error: invalid low surrogate + + + + UTF-16 error: isolated low surrogate + + + + UTF-32 error: code points 0xd800-0xdfff are not defined + + + + UTF-32 error: code points greater than 0x10ffff are not defined + + + + bad data value + + + + patterns do not all use the same character tables + + + + magic number missing + + + + pattern compiled in wrong mode: 8/16/32-bit error + + + + bad offset value + + + + bad option value + + + + invalid replacement string + + + + bad offset into UTF string + + + + callout error code + + + + invalid data in workspace for DFA restart + + + + too much recursion for DFA matching + + + + backreference condition or recursion test is not supported for DFA matching + + + + function is not supported for DFA matching + + + + pattern contains an item that is not supported for DFA matching + + + + workspace size exceeded in DFA matching + + + + internal error - pattern overwritten? + + + + bad JIT option + + + + JIT stack limit reached + + + + match limit exceeded + + + + no more memory + + + + unknown substring + + + + non-unique substring name + + + + NULL argument passed + + + + nested recursion at the same subject position + + + + matching depth limit exceeded + + + + requested value is not available + + + + requested value is not set + + + + offset limit set without PCRE2_USE_OFFSET_LIMIT + + + + bad escape sequence in replacement string + + + + expected closing curly bracket in replacement string + + + + bad substitution in replacement string + + + + match with end before start or start moved backwards is not supported + + + + too many replacements (more than INT_MAX) + + + + bad serialized data + + + + heap limit exceeded + + + + invalid syntax + + + + internal error - duplicate substitution match + + + + PCRE2_MATCH_INVALID_UTF is not supported for DFA matching + + + + + QSQLite2Driver + + Error opening database + + + + Unable to begin transaction + + + + Unable to commit transaction + + + + Unable to rollback transaction + + + + + QSQLite2Result + + Unable to fetch results + + + + Unable to execute statement + + + + + QSQLiteDriver + + Error opening database + + + + Error closing database + + + + Unable to begin transaction + + + + Unable to commit transaction + + + + Unable to rollback transaction + + + + + QSQLiteResult + + Unable to fetch row + + + + No query + + + + Unable to execute statement + + + + Unable to execute multiple statements at a time + + + + Unable to reset statement + + + + Unable to bind parameters + + + + Parameter count mismatch + + + + + QSaveFile + + Existing file %1 is not writable + + + + Filename refers to a directory + + + + QSaveFile cannot open '%1' without direct write fallback enabled. + + + + Writing canceled by application + + + + + QScrollBar + + Scroll here + + + + Left edge + + + + Top + + + + Right edge + + + + Bottom + + + + Page left + + + + Page up + + + + Page right + + + + Page down + + + + Scroll left + + + + Scroll up + + + + Scroll right + + + + Scroll down + + + + + QSctpSocket + + The remote host closed the connection + + + + + QSharedMemory + + %1: unable to set key on lock + + + + %1: create size is less then 0 + + + + %1: unable to lock + + + + %1: unable to unlock + + + + %1: key is empty + + + + %1: bad name + + + + %1: UNIX key file doesn't exist + + + + %1: ftok failed + + + + %1: unable to make key + + + + %1: system-imposed size restrictions + + + + %1: not attached + + + + %1: permission denied + + + + %1: already exists + + + + %1: doesn't exist + + + + %1: out of resources + + + + %1: unknown error %2 + + + + %1: invalid size + + + + %1: key error + + + + %1: size query failed + + + + + QShortcut + + Space + This and all following "incomprehensible" strings in QShortcut context are key names. Please use the localized names appearing on actual keyboards or whatever is commonly used. + + + + Esc + + + + Tab + + + + Backtab + + + + Backspace + + + + Return + + + + Enter + + + + Ins + + + + Del + + + + Pause + + + + Print + + + + SysReq + + + + Home + + + + End + + + + Left + + + + Up + + + + Right + + + + Down + + + + PgUp + + + + PgDown + + + + CapsLock + + + + NumLock + + + + ScrollLock + + + + Menu + + + + Help + + + + Back + + + + Forward + + + + Stop + + + + Refresh + + + + Volume Down + + + + Volume Mute + + + + Volume Up + + + + Bass Boost + + + + Bass Up + + + + Bass Down + + + + Treble Up + + + + Treble Down + + + + Media Play + + + + Media Stop + + + + Media Previous + + + + Media Next + + + + Media Record + + + + Media Pause + Media player pause button + + + + Toggle Media Play/Pause + Media player button to toggle between playing and paused + + + + Home Page + + + + Favorites + + + + Search + + + + Standby + + + + Open URL + + + + Launch Mail + + + + Launch Media + + + + Launch (0) + + + + Launch (1) + + + + Launch (2) + + + + Launch (3) + + + + Launch (4) + + + + Launch (5) + + + + Launch (6) + + + + Launch (7) + + + + Launch (8) + + + + Launch (9) + + + + Launch (A) + + + + Launch (B) + + + + Launch (C) + + + + Launch (D) + + + + Launch (E) + + + + Launch (F) + + + + Launch (G) + + + + Launch (H) + + + + Monitor Brightness Up + + + + Monitor Brightness Down + + + + Keyboard Light On/Off + + + + Keyboard Brightness Up + + + + Keyboard Brightness Down + + + + Power Off + + + + Wake Up + + + + Eject + + + + Screensaver + + + + WWW + + + + Sleep + + + + LightBulb + + + + Shop + + + + History + + + + Add Favorite + + + + Hot Links + + + + Adjust Brightness + + + + Finance + + + + Community + + + + Media Rewind + + + + Back Forward + + + + Application Left + + + + Application Right + + + + Book + + + + CD + + + + Calculator + + + + Calendar + + + + Clear + + + + Clear Grab + + + + Close + + + + Adjust contrast + + + + Copy + + + + Cut + + + + Display + + + + DOS + + + + Documents + + + + Spreadsheet + + + + Browser + + + + Game + + + + Go + + + + iTouch + + + + Logoff + + + + Market + + + + Meeting + + + + Memo + + + + Keyboard Menu + + + + Menu PB + + + + My Sites + + + + News + + + + Home Office + + + + Option + + + + Paste + + + + Phone + + + + Reply + + + + Reload + + + + Rotate Windows + + + + Rotation PB + + + + Rotation KB + + + + Save + + + + Send + + + + Spellchecker + + + + Split Screen + + + + Support + + + + Task Panel + + + + Terminal + + + + To-do list + + + + Tools + + + + Travel + + + + Video + + + + Word Processor + + + + XFer + + + + Zoom In + + + + Zoom Out + + + + Away + + + + Messenger + + + + WebCam + + + + Mail Forward + + + + Pictures + + + + Music + + + + Battery + + + + Bluetooth + + + + Wireless + + + + Ultra Wide Band + + + + Media Fast Forward + + + + Audio Repeat + + + + Audio Random Play + + + + Subtitle + + + + Audio Cycle Track + + + + Time + + + + Hibernate + + + + View + + + + Top Menu + + + + Power Down + + + + Suspend + + + + Microphone Mute + + + + Red + + + + Green + + + + Yellow + + + + Blue + + + + Channel Up + + + + Channel Down + + + + Guide + + + + Info + + + + Settings + + + + Microphone Volume Up + + + + Microphone Volume Down + + + + New + + + + Open + + + + Find + + + + Undo + + + + Redo + + + + Print Screen + + + + Page Up + + + + Page Down + + + + Caps Lock + + + + Num Lock + + + + Number Lock + + + + Scroll Lock + + + + Insert + + + + Delete + + + + Escape + + + + System Request + + + + Select + + + + Yes + + + + No + + + + Context1 + + + + Context2 + + + + Context3 + + + + Context4 + + + + Call + Button to start a call (note: a separate button is used to end the call) + + + + Hangup + Button to end a call (note: a separate button is used to start the call) + + + + Toggle Call/Hangup + Button that will hang up if we're in call, or make a call if we're not. + + + + Flip + + + + Voice Dial + Button to trigger voice dialing + + + + Last Number Redial + Button to redial the last number called + + + + Camera Shutter + Button to trigger the camera shutter (take a picture) + + + + Camera Focus + Button to focus the camera + + + + Kanji + + + + Muhenkan + + + + Henkan + + + + Romaji + + + + Hiragana + + + + Katakana + + + + Hiragana Katakana + + + + Zenkaku + + + + Hankaku + + + + Zenkaku Hankaku + + + + Touroku + + + + Massyo + + + + Kana Lock + + + + Kana Shift + + + + Eisu Shift + + + + Eisu toggle + + + + Code input + + + + Multiple Candidate + + + + Previous Candidate + + + + Hangul + + + + Hangul Start + + + + Hangul End + + + + Hangul Hanja + + + + Hangul Jamo + + + + Hangul Romaja + + + + Hangul Jeonja + + + + Hangul Banja + + + + Hangul PreHanja + + + + Hangul PostHanja + + + + Hangul Special + + + + Cancel + + + + Printer + + + + Execute + + + + Play + + + + Zoom + + + + Exit + + + + Touchpad Toggle + + + + Touchpad On + + + + Touchpad Off + + + + Ctrl + + + + Shift + + + + Alt + + + + Meta + + + + Num + + + + + + Key separator in shortcut string + + + + F%1 + + + + + QSocks5SocketEngine + + Connection to proxy refused + + + + Connection to proxy closed prematurely + + + + Proxy host not found + + + + Connection to proxy timed out + + + + Proxy authentication failed + + + + Proxy authentication failed: %1 + + + + SOCKS version 5 protocol error + + + + General SOCKSv5 server failure + + + + Connection not allowed by SOCKSv5 server + + + + TTL expired + + + + SOCKSv5 command not supported + + + + Address type not supported + + + + Unknown SOCKSv5 proxy error code 0x%1 + + + + Network operation timed out + + + + + QSpiAccessibleBridge + + invalid role + Role of an accessible object - the object is in an invalid state or could not be constructed + + + + title bar + Role of an accessible object + + + + menu bar + Role of an accessible object + + + + scroll bar + Role of an accessible object + + + + grip + Role of an accessible object - the grip is usually used for resizing another object + + + + sound + Role of an accessible object + + + + cursor + Role of an accessible object + + + + text caret + Role of an accessible object + + + + alert message + Role of an accessible object + + + + frame + Role of an accessible object: a window with frame and title +---------- +Role of an accessible object + + + + filler + Role of an accessible object + + + + popup menu + Role of an accessible object + + + + menu item + Role of an accessible object + + + + tool tip + Role of an accessible object + + + + application + Role of an accessible object + + + + document + Role of an accessible object + + + + panel + Role of an accessible object + + + + chart + Role of an accessible object + + + + dialog + Role of an accessible object + + + + separator + Role of an accessible object + + + + tool bar + Role of an accessible object + + + + status bar + Role of an accessible object + + + + table + Role of an accessible object + + + + column header + Role of an accessible object - part of a table + + + + row header + Role of an accessible object - part of a table + + + + column + Role of an accessible object - part of a table + + + + row + Role of an accessible object - part of a table + + + + cell + Role of an accessible object - part of a table + + + + link + Role of an accessible object + + + + help balloon + Role of an accessible object + + + + assistant + Role of an accessible object - a helper dialog + + + + list + Role of an accessible object + + + + list item + Role of an accessible object + + + + tree + Role of an accessible object + + + + tree item + Role of an accessible object + + + + page tab + Role of an accessible object + + + + property page + Role of an accessible object + + + + indicator + Role of an accessible object + + + + graphic + Role of an accessible object + + + + label + Role of an accessible object + + + + text + Role of an accessible object + + + + push button + Role of an accessible object + + + + check box + Role of an accessible object + + + + radio button + Role of an accessible object + + + + combo box + Role of an accessible object + + + + progress bar + Role of an accessible object + + + + dial + Role of an accessible object + + + + hotkey field + Role of an accessible object + + + + slider + Role of an accessible object + + + + spin box + Role of an accessible object + + + + canvas + Role of an accessible object + + + + animation + Role of an accessible object + + + + equation + Role of an accessible object + + + + button with drop down + Role of an accessible object + + + + button menu + Role of an accessible object + + + + button with drop down grid + Role of an accessible object - a button that expands a grid. + + + + space + Role of an accessible object - blank space between other objects. + + + + page tab list + Role of an accessible object + + + + clock + Role of an accessible object + + + + splitter + Role of an accessible object + + + + layered pane + Role of an accessible object + + + + web document + Role of an accessible object + + + + paragraph + Role of an accessible object + + + + section + Role of an accessible object + + + + color chooser + Role of an accessible object + + + + footer + Role of an accessible object + + + + form + Role of an accessible object + + + + heading + Role of an accessible object + + + + note + Role of an accessible object + + + + complementary content + Role of an accessible object + + + + terminal + Role of an accessible object + + + + desktop + Role of an accessible object + + + + notification + Role of an accessible object + + + + unknown + Role of an accessible object + + + + + QSslDiffieHellmanParameter + + No error + + + + Invalid input data + + + + The given Diffie-Hellman parameters are deemed unsafe + + + + + QSslSocket + + Error when setting the OpenSSL configuration (%1) + + + + Error when setting the elliptic curves (%1) + + + + Error creating SSL context (%1) + + + + unsupported protocol + + + + Error while setting the minimal protocol version + + + + Error while setting the maximum protocol version + + + + Invalid or empty cipher list (%1) + + + + Cannot provide a certificate with no key, %1 + + + + Error loading local certificate, %1 + + + + Error loading private key, %1 + + + + Private key does not certify public key, %1 + + + + Diffie-Hellman parameters are not valid + + + + OpenSSL version with disabled elliptic curves + + + + Expecting QByteArray for %1 + + + + An error occurred attempting to set %1 to %2 + + + + Wrong value for %1 (%2) + + + + Unrecognized command %1 = %2 + + + + SSL_CONF_finish() failed + + + + SSL_CONF_CTX_new() failed + + + + No error + + + + The issuer certificate could not be found + + + + The certificate signature could not be decrypted + + + + The public key in the certificate could not be read + + + + The signature of the certificate is invalid + + + + The certificate is not yet valid + + + + The certificate has expired + + + + The certificate's notBefore field contains an invalid time + + + + The certificate's notAfter field contains an invalid time + + + + The certificate is self-signed, and untrusted + + + + The root certificate of the certificate chain is self-signed, and untrusted + + + + The issuer certificate of a locally looked up certificate could not be found + + + + No certificates could be verified + + + + One of the CA certificates is invalid + + + + The basicConstraints path length parameter has been exceeded + + + + The supplied certificate is unsuitable for this purpose + + + + The root CA certificate is not trusted for this purpose + + + + The root CA certificate is marked to reject the specified purpose + + + + The current candidate issuer certificate was rejected because its subject name did not match the issuer name of the current certificate + + + + The current candidate issuer certificate was rejected because its issuer name and serial number was present and did not match the authority key identifier of the current certificate + + + + The peer did not present any certificate + + + + The host name did not match any of the valid hosts for this certificate + + + + The peer certificate is blacklisted + + + + No OCSP status response found + + + + The OCSP status request had invalid syntax + + + + OCSP response contains an unexpected number of SingleResponse structures + + + + OCSP responder reached an inconsistent internal state + + + + OCSP responder was unable to return a status for the requested certificate + + + + The server requires the client to sign the OCSP request in order to construct a response + + + + The client is not authorized to request OCSP status from this server + + + + OCSP responder's identity cannot be verified + + + + The identity of a certificate in an OCSP response cannot be established + + + + The certificate status response has expired + + + + The certificate's status is unknown + + + + Unknown error + + + + TLS initialization failed + + + + Attempted to use an unsupported protocol. + + + + The TLS/SSL connection has been closed + + + + Error creating SSL session, %1 + + + + Error creating SSL session: %1 + + + + Server-side QSslSocket does not support OCSP stapling + + + + Failed to enable OCSP stapling + + + + Client-side sockets do not send OCSP responses + + + + Unable to init SSL Context: %1 + + + + Unable to write data: %1 + + + + Unable to decrypt data: %1 + + + + Error while reading: %1 + + + + Error during SSL handshake: %1 + + + + Failed to decode OCSP response + + + + Failed to extract basic OCSP response + + + + No certificate verification store, cannot verify OCSP response + + + + Failed to decode a SingleResponse from OCSP status response + + + + Failed to extract 'this update time' from the SingleResponse + + + + Insufficient memory + + + + Internal error + + + + An internal handle was invalid + + + + An internal token was invalid + + + + Access denied + + + + No authority could be contacted for authorization + + + + No credentials + + + + The target is unknown or unreachable + + + + An unsupported function was requested + + + + The hostname provided does not match the one received from the peer + + + + No common protocol exists between the client and the server + + + + Unexpected or badly-formatted message received + + + + The data could not be encrypted + + + + No cipher suites in common + + + + The credentials were not recognized / Invalid argument + + + + The message was tampered with, damaged or out of sequence. + + + + A message was received out of sequence. + + + + Unknown error occurred: %1 + + + + Invalid protocol chosen + + + + The certificate provided cannot be used for a client. + + + + The certificate provided cannot be used for a server. + + + + Server did not accept any certificate we could present. + + + + Algorithm mismatch + + + + Handshake failed: %1 + + + + Failed to query the TLS context: %1 + + + + Did not get the required attributes for the connection. + + + + Unwanted protocol was negotiated + + + + Renegotiation was unsuccessful: %1 + + + + Schannel failed to encrypt data: %1 + + + + Cannot provide a certificate with no key + + + + + QStandardPaths + + Desktop + + + + Documents + + + + Fonts + + + + Applications + + + + Music + + + + Movies + + + + Pictures + + + + Temporary Directory + + + + Home + + + + Cache + + + + Shared Data + + + + Runtime + + + + Configuration + + + + Shared Configuration + + + + Shared Cache + + + + Download + + + + Application Data + + + + Application Configuration + + + + + QStateMachine + + Missing initial state in compound state '%1' + + + + Missing default state in history state '%1' + + + + No common ancestor for targets and source of transition from state '%1' + + + + Child mode of state machine '%1' is not 'ExclusiveStates'. + + + + Unknown error + + + + + QSystemSemaphore + + %1: permission denied + + + + %1: already exists + + + + %1: does not exist + + + + %1: out of resources + + + + %1: unknown error %2 + + + + + QTDSDriver + + Unable to open connection + + + + Unable to use database + + + + + QTabBar + + Scroll Left + + + + Scroll Right + + + + + QTcpServer + + Operation on socket is not supported + + + + + QUdpSocket + + Unable to send a datagram + + + + No datagram available for reading + + + + + QUndoGroup + + Undo %1 + + + + Undo + Default text for undo action + + + + Redo %1 + + + + Redo + Default text for redo action + + + + + QUndoModel + + <empty> + + + + + QUndoStack + + Undo %1 + + + + Undo + Default text for undo action + + + + Redo %1 + + + + Redo + Default text for redo action + + + + + QUnicodeControlCharacterMenu + + LRM Left-to-right mark + + + + RLM Right-to-left mark + + + + ZWJ Zero width joiner + + + + ZWNJ Zero width non-joiner + + + + ZWSP Zero width space + + + + LRE Start of left-to-right embedding + + + + RLE Start of right-to-left embedding + + + + LRO Start of left-to-right override + + + + RLO Start of right-to-left override + + + + PDF Pop directional formatting + + + + LRI Left-to-right isolate + + + + RLI Right-to-left isolate + + + + FSI First strong isolate + + + + PDI Pop directional isolate + + + + Insert Unicode control character + + + + + QWhatsThisAction + + What's This? + + + + + QWidget + + * + + + + + QWidgetTextControl + + &Undo + + + + &Redo + + + + Cu&t + + + + &Copy + + + + Copy &Link Location + + + + &Paste + + + + Delete + + + + Select All + + + + + QWindowsDirect2DIntegration + + Qt cannot load the direct2d platform plugin because the Direct2D version on this system is too old. The minimum system requirement for this platform plugin is Windows 7 SP1 with Platform Update. + +The minimum Direct2D version required is %1. The Direct2D version on this system is %2. + + + + Cannot load direct2d platform plugin + + + + + QWizard + + Go Back + + + + < &Back + + + + Continue + + + + &Next + + + + &Next > + + + + Commit + + + + Done + + + + &Finish + + + + Cancel + + + + Help + + + + &Help + + + + + QXml + + no error occurred + + + + error triggered by consumer + + + + unexpected end of file + + + + more than one document type definition + + + + error occurred while parsing element + + + + tag mismatch + + + + error occurred while parsing content + + + + unexpected character + + + + invalid name for processing instruction + + + + version expected while reading the XML declaration + + + + wrong value for standalone declaration + + + + encoding declaration or standalone declaration expected while reading the XML declaration + + + + standalone declaration expected while reading the XML declaration + + + + error occurred while parsing document type definition + + + + letter is expected + + + + error occurred while parsing comment + + + + error occurred while parsing reference + + + + internal general entity reference not allowed in DTD + + + + external parsed general entity reference not allowed in attribute value + + + + external parsed general entity reference not allowed in DTD + + + + unparsed entity reference in wrong context + + + + recursive entities + + + + error in the text declaration of an external entity + + + + + QXmlStream + + Extra content at end of document. + + + + Invalid entity value. + + + + Invalid XML character. + + + + Sequence ']]>' not allowed in content. + + + + Encountered incorrectly encoded content. + + + + Namespace prefix '%1' not declared + + + + Illegal namespace declaration. + + + + Attribute '%1' redefined. + + + + Unexpected character '%1' in public id literal. + + + + Invalid XML version string. + + + + Unsupported XML version. + + + + The standalone pseudo attribute must appear after the encoding. + + + + %1 is an invalid encoding name. + + + + Encoding %1 is unsupported + + + + Standalone accepts only yes or no. + + + + Invalid attribute in XML declaration. + + + + Premature end of document. + + + + Invalid document. + + + + '%1' + expected + '<first option>' + + + + %1 or '%2' + expected + <first option>, '<second option>' + + + + %1, '%2' + expected + <options so far>, '<next option>' + + + + %1, or '%2' + expected + <options so far>, or '<final option>' + + + + Expected %1, but got '%2'. + + + + Unexpected '%1'. + + + + Expected character data. + + + + Self-referencing entity detected. + + + + Entity expands to more characters than the entity expansion limit. + + + + Start tag expected. + + + + NDATA in parameter entity declaration. + + + + XML declaration not at start of document. + + + + %1 is an invalid processing instruction name. + + + + Invalid processing instruction name. + + + + %1 is an invalid PUBLIC identifier. + + + + Invalid XML name. + + + + Opening and ending tag mismatch. + + + + Entity '%1' not declared. + + + + Reference to unparsed entity '%1'. + + + + Reference to external entity '%1' in attribute value. + + + + Invalid character reference. + + + + -- cgit v1.2.3