From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- .../bootsectors/bootsector2-vbinstst-kernel.asm | 527 +++++++++++++++++++++ 1 file changed, 527 insertions(+) create mode 100644 src/VBox/ValidationKit/bootsectors/bootsector2-vbinstst-kernel.asm (limited to 'src/VBox/ValidationKit/bootsectors/bootsector2-vbinstst-kernel.asm') diff --git a/src/VBox/ValidationKit/bootsectors/bootsector2-vbinstst-kernel.asm b/src/VBox/ValidationKit/bootsectors/bootsector2-vbinstst-kernel.asm new file mode 100644 index 00000000..b1a53f7f --- /dev/null +++ b/src/VBox/ValidationKit/bootsectors/bootsector2-vbinstst-kernel.asm @@ -0,0 +1,527 @@ +; $Id: bootsector2-vbinstst-kernel.asm $ +;; @file +; bootsector #2 kernel for big instruction testcases. +; VBoxManage setextradata bs-vbinstst-64-1 VBoxInternal/Devices/VMMDev/0/Config/TestingEnabled 1 +; + +; +; Copyright (C) 2007-2023 Oracle and/or its affiliates. +; +; This file is part of VirtualBox base platform packages, as +; available from https://www.virtualbox.org. +; +; This program is free software; you can redistribute it and/or +; modify it under the terms of the GNU General Public License +; as published by the Free Software Foundation, in version 3 of the +; License. +; +; This program is distributed in the hope that it will be useful, but +; WITHOUT ANY WARRANTY; without even the implied warranty of +; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +; General Public License for more details. +; +; You should have received a copy of the GNU General Public License +; along with this program; if not, see . +; +; The contents of this file may alternatively be used under the terms +; of the Common Development and Distribution License Version 1.0 +; (CDDL), a copy of it is provided in the "COPYING.CDDL" file included +; in the VirtualBox distribution, in which case the provisions of the +; CDDL are applicable instead of those of the GPL. +; +; You may elect to license modified versions of this file under the +; terms and conditions of either the GPL or the CDDL or both. +; +; SPDX-License-Identifier: GPL-3.0-only OR CDDL-1.0 +; + + +; +; This is always the first include file. +; +%include "bootsector2-first.mac" + +; +; Include and execute the init code. +; + %define BS2_INIT_RM + %define BS2_WITH_TRAPS + %define BS2_WITHOUT_RAW_MODE ; causes troubles with PIC/floppy. + + %define BS2_INC_RM + %define BS2_INC_PE16 + %define BS2_INC_PE32 + %define BS2_INC_PP16 + %define BS2_INC_PP32 + %define BS2_INC_PAE16 + %define BS2_INC_PAE32 + %define BS2_INC_LM16 + %define BS2_INC_LM32 + %define BS2_INC_LM64 + %include "bootsector2-common-init-code.mac" + %include "bootsector2-api.mac" + %include "iprt/formats/pe.mac" + %include "iprt/formats/mz.mac" + + +BEGINCODE +BEGINPROC main +; +; Set up the runtime environment. +; + call Bs2EnableA20_r86 + + ; 16-bit real mode. +%undef BS2_API_TEMPLATE_ACTION +%define BS2_API_TEMPLATE_ACTION(a_Name) mov dword [NAME(g_pfn %+ a_Name %+ _r86)], dword NAME(a_Name %+ _r86) + BS2_API_TEMPLATE + + ; 16-bit protected mode. +%undef BS2_API_TEMPLATE_ACTION +%define BS2_API_TEMPLATE_ACTION(a_Name) mov word [NAME(g_pfn %+ a_Name %+ _p16)], word NAME(a_Name %+ _p16) + BS2_API_TEMPLATE + mov eax, BS2_SEL_CS16 +%undef BS2_API_TEMPLATE_ACTION +%define BS2_API_TEMPLATE_ACTION(a_Name) mov [NAME(g_pfn %+ a_Name %+ _p16) + 2], ax + BS2_API_TEMPLATE + + ; 32-bit +%undef BS2_API_TEMPLATE_ACTION +%define BS2_API_TEMPLATE_ACTION(a_Name) mov dword [NAME(g_pfn %+ a_Name %+ _p32)], dword NAME(a_Name %+ _p32) + BS2_API_TEMPLATE + + ; 64-bit +%undef BS2_API_TEMPLATE_ACTION +%define BS2_API_TEMPLATE_ACTION(a_Name) mov dword [NAME(g_pfn %+ a_Name %+ _p64)], dword NAME(a_Name %+ _p64) + BS2_API_TEMPLATE + xor eax, eax +%undef BS2_API_TEMPLATE_ACTION +%define BS2_API_TEMPLATE_ACTION(a_Name) mov dword [NAME(g_pfn %+ a_Name %+ _p64) + 4], eax + BS2_API_TEMPLATE + + ; The magic markers and version number. + mov dword [g_u32Bs2ApiMagic], BS2_API_MAGIC + mov dword [g_u32Bs2ApiEndMagic], BS2_API_MAGIC + mov dword [g_u32Bs2ApiVersion], BS2_API_VERSION + +; +; Load the extended image into high memory. +; + mov dl, [g_bBootDrv] + call NAME(bs2LoadBigImage) + +; +; Hand control over to the extended image. +; +%ifdef BS2_BIG_IMAGE_LM64 + call Bs2EnterMode_rm_lm64 +BITS 64 + mov eax, BS2_BIG_LOAD_ADDR + call rax + call Bs2ExitMode_lm64 +BITS 16 + +%elifdef BS2_BIG_IMAGE_PP32 + call Bs2EnterMode_rm_pp32 +BITS 32 + mov eax, BS2_BIG_LOAD_ADDR + call eax + call Bs2ExitMode_pp32 +BITS 16 + +%elifdef BS2_BIG_IMAGE_PAE32 + call Bs2EnterMode_rm_pae32 +BITS 32 + mov eax, BS2_BIG_LOAD_ADDR + call eax + call Bs2ExitMode_pae32 +BITS 16 + +%else + ; + ; Probe the image, looking for an executable format we can deal with. + ; Not doing a lot of checking here, but who cares right now... + ; + call Bs2EnterMode_rm_pp32 +BITS 32 + mov eax, BS2_BIG_LOAD_ADDR + cmp word [eax], IMAGE_DOS_SIGNATURE + jne .not_dos + add eax, [eax + IMAGE_DOS_HEADER.e_lfanew] +.not_dos: + cmp dword [eax], IMAGE_NT_SIGNATURE + je .is_pe + mov eax, BS2_BIG_LOAD_ADDR + jmp .start_32 + +.is_pe: + lea edx, [eax + IMAGE_NT_HEADERS32.FileHeader] + cmp word [edx + IMAGE_FILE_HEADER.Machine], IMAGE_FILE_MACHINE_I386 + je .is_pe32 + cmp word [edx + IMAGE_FILE_HEADER.Machine], IMAGE_FILE_MACHINE_AMD64 + je .is_pe64 + jmp .panic_32 + +.is_pe32: + add edx, IMAGE_FILE_HEADER_size + mov eax, [edx + IMAGE_OPTIONAL_HEADER32.AddressOfEntryPoint] + add eax, BS2_BIG_LOAD_ADDR + jmp .start_32 + +.is_pe64: + add edx, IMAGE_FILE_HEADER_size + mov eax, [edx + IMAGE_OPTIONAL_HEADER64.AddressOfEntryPoint] + add eax, BS2_BIG_LOAD_ADDR + jmp .start_64 + + ; Start executing at eax in 32-bit mode (current). +.start_32: + call eax +.panic_32: + call Bs2ExitMode_pp32 +BITS 16 + jmp .panic + + ; Start executing at eax in 64-bit mode. +BITS 32 +.start_64: + call Bs2ExitMode_pp32 +BITS 16 + call Bs2EnterMode_rm_lm64 +BITS 64 + mov eax, eax + call rax + call Bs2ExitMode_lm64 +BITS 16 + jmp .panic + +.panic: +%endif + call Bs2Panic +ENDPROC main + + + + +;; +; Loads the big image off the floppy. +; +; This uses the the_end label to figure out the starting offset. +; The length is assumed to be the whole floppy. +; +; Clobbers nothing, except for 68KB of memory beyond the_end. +; +; @param dl The boot drive number (from BIOS). +; +BITS 16 +BEGINPROC bs2LoadBigImage + push ebp + movzx ebp, sp + +%define bSavedDiskNo byte [bp - 02h] + push dx +%define bMaxSector byte [bp - 04h] + push 0 +%define bMaxHead byte [bp - 06h] + push 0 +%define bMaxCylinder byte [bp - 08h] + push 0 +%define pbHighDst dword [bp - 0ch] + push dword BS2_BIG_LOAD_ADDR +%define SegTemp word [bp - 0eh] + push 0 +%define fStatus byte [bp - 10h] + push 0 + + push es + push ds + push eax + push edx + push ecx + push ebx + push edi + push esi + push ebp + + ; Display message. + push cs + push .s_szLoadingBigImage + call PrintF_r86 + add sp, 4 + + + ; + ; Try figure the geometry. This defines how much we'll read. + ; + mov ah, 08h + xor di, di ; (es:di = 0000:0000 works around some buggy bioses, says wikipedia.) + mov es, di + int 13h + jc .param_error + mov bMaxSector, cl ; Do the cl[7:6]+ch stuff so we can address 255 sectors on the fake 63MB floppy. + mov bMaxHead, dh + mov bMaxCylinder, ch ; See above. + mov dl, bSavedDiskNo +%if 0 + movzx ax, bMaxCylinder + push ax + movzx cx, bMaxHead + push cx + movzx ax, bMaxSector + push ax + push ds + push .s_szDbgParam + call PrintF_r86 + jmp .dprintf_param_done +.s_szDbgParam: + db 13, 10, 'Floppy params max: sectors=%RX16 heads=%RX16 cylinders=%RX16', 13, 10, 0 +.dprintf_param_done: +%endif + + ; + ; Skip the kernel image (this could be done more efficiently, but this + ; also does the trick). + ; + lea eax, [dword the_end] + sub eax, start + shr eax, 9 ; sectors to skip + mov cx, 0001h ; sector (1-based), cylinder (0-based). + xor dh, dh ; head (0-based). +.skip_one_more: + inc cl + cmp cl, bMaxSector + jbe .decrement_sector_count + + mov cl, 1 + inc dh + cmp dh, bMaxHead ; ASSUMES bMaxHead < 255. + jbe .decrement_sector_count + + mov dh, 0 + inc ch + +.decrement_sector_count: + dec ax + jnz .skip_one_more + + + + ; + ; Load loop. We load and copy 64 KB at the time into the high location. + ; Fixed registers (above): dl=drive, cl[7:6]:ch=cylinder, dh=head, cl[5:0]=sector. + ; + lea eax, [dword the_end + 0ffffh] + and eax, 0ffff0000h + shr eax, 4 + mov SegTemp, ax ; the 64KB segment we use for temporary storage. + +.the_load_loop: + mov al, '.' + call PrintChr_r86 + + ; Fill the segment with int3s (in case we don't read a full 64KB). + mov eax, 0cccccccch + mov di, SegTemp + mov es, di + xor edi, edi + push ecx + cld + mov cx, 4000h + rep stosd + pop ecx + + ; + ; Load a bunch of sectors into the temp segment. + ; + xor ebx, ebx +.the_sector_load_loop: + ; Figure how many sectors we can read without switching track or side. + movzx ax, bMaxSector + sub al, cl + inc al ; al = sectors left to read in the current track on the current side. + mov di, bx + shr di, 9 ; bx/512 = current sector offset. + neg di + add di, 10000h / 512 ; di = sectors left to read in the 64KB buffer. + cmp ax, di ; ax = min(ax, di) + jbe .use_ax_sector_count1 + mov ax, di +.use_ax_sector_count1: + cmp ax, 64 ; ax = min(ax,64) - Our BIOS limitation is 72, play safe. + jbe .use_ax_sector_count2 + mov ax, 64 +.use_ax_sector_count2: + mov di, ax ; save the number of sectors we read + + ; Do the reading. +%if 0 + push bx + push ax + push dx + push cx + push cs + push .s_szDbgRead + call PrintF_r86 + jmp .after_read_dprintf +.s_szDbgRead: db 'Reading CX=%RX16 DX=%RX16 AX=%RX16 BX=%RX16', 13, 10, 0 +.after_read_dprintf: +%endif + push bx + mov ah, 02h ; ah=read function + int 13h + pop bx + jc .read_error + + ; advance to the next sector/head/cylinder and address (lazy impl). +.advance_another_sector: + cmp cl, bMaxSector + je .next_head + inc cl + jmp .adv_addr + +.next_head: + mov cl, 1 + cmp dh, bMaxHead + je .next_cylinder + inc dh + jmp .adv_addr + +.next_cylinder: + mov dh, 0 + cmp ch, bMaxCylinder ; No the cl[7:6]+ch stuff so we can address 255 sectors on the fake 63MB floppy. + jb .update_ch + mov fStatus, 1 + jmp .move_block +.update_ch: + inc ch + +.adv_addr: + add bx, 512 + dec di + jnz .advance_another_sector + + test bx, bx + jnz .the_sector_load_loop + +.move_block: + ; + ; Copy the memory into high mem. + ; +%if 0 + mov edi, pbHighDst + push edi + push cs + push .s_szDbgMove + call PrintF_r86 + jmp .after_move_dprintf +.s_szDbgMove: db 'Moving memory to EDI=%RX32', 13, 10, 0 +.after_move_dprintf: +%endif + + push ecx + push edx + push ds + push es + call Bs2EnterMode_rm_pp32 +BITS 32 + ; Copy + mov edi, pbHighDst + movzx esi, SegTemp + shl esi, 4 + mov ecx, 10000h / 4 + cld + rep movsd + + ; Verify + mov edi, pbHighDst + movzx esi, SegTemp + shl esi, 4 + mov ecx, 10000h / 4 + cld + repe cmpsd + je .mem_verified_ok + mov fStatus, 2 + +.mem_verified_ok: + mov pbHighDst, edi + + call Bs2ExitMode_pp32 +BITS 16 + pop es + pop ds + pop edx + pop ecx + + ; Continue reading and copying? + cmp fStatus, 0 + je .the_load_loop + + ; Do we quit the loop on a failure? + cmp fStatus, 2 + je .verify_failed_msg + + ; + ; Done, so end the current message line. + ; + mov al, 13 + call PrintChr_r86 + mov al, 10 + call PrintChr_r86 + + + pop esi + pop edi + pop ebx + pop ecx + pop edx + pop eax + pop ds + pop es + mov sp, bp + pop ebp + ret + + + ; + ; Something went wrong, display a message. + ; +.verify_failed_msg: + mov edi, pbHighDst + push edi + push cs + push .s_szVerifyFailed + jmp .print_message_and_panic + +.param_error: + push ax + push cs + push .s_szParamError + jmp .print_message_and_panic + +.read_error: + push ax + push cs + push .s_szReadError + jmp .print_message_and_panic + +.print_message_and_panic: + call PrintF_r86 + call Bs2Panic + jmp .print_message_and_panic + +.s_szReadError: + db 13, 10, 'Error reading: %RX8', 13, 10, 0 +.s_szParamError: + db 13, 10, 'Error getting params: %RX8', 13, 10, 0 +.s_szVerifyFailed: + db 13, 10, 'Failed to move block high... (%RX32) Got enough memory configured?', 13, 10, 0 +.s_szLoadingBigImage: + db 'Loading 2nd image.', 0 +ENDPROC bs2LoadBigImage + + +; +; End sections and image. +; +%include "bootsector2-common-end.mac" + -- cgit v1.2.3