From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/nsprpub/pr/include/prthread.h | 305 +++++++++++++++++++++++ 1 file changed, 305 insertions(+) create mode 100644 src/libs/xpcom18a4/nsprpub/pr/include/prthread.h (limited to 'src/libs/xpcom18a4/nsprpub/pr/include/prthread.h') diff --git a/src/libs/xpcom18a4/nsprpub/pr/include/prthread.h b/src/libs/xpcom18a4/nsprpub/pr/include/prthread.h new file mode 100644 index 00000000..bc2be5e1 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/include/prthread.h @@ -0,0 +1,305 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +#ifndef prthread_h___ +#define prthread_h___ + +/* +** API for NSPR threads. On some architectures (MAC and WIN16 +** notably) pre-emptibility is not guaranteed. Hard priority scheduling +** is not guaranteed, so programming using priority based synchronization +** is a no-no. +** +** NSPR threads are scheduled based loosly on their client set priority. +** In general, a thread of a higher priority has a statistically better +** chance of running relative to threads of lower priority. However, +** NSPR uses multiple strategies to provide execution vehicles for thread +** abstraction of various host platforms. As it turns out, there is little +** NSPR can do to affect the scheduling attributes of "GLOBAL" threads. +** However, a semblance of GLOBAL threads is used to implement "LOCAL" +** threads. An arbitrary number of such LOCAL threads can be assigned to +** a single GLOBAL thread. +** +** For scheduling, NSPR will attempt to run the highest priority LOCAL +** thread associated with a given GLOBAL thread. It is further assumed +** that the host OS will apply some form of "fair" scheduling on the +** GLOBAL threads. +** +** Threads have a "system flag" which when set indicates the thread +** doesn't count for determining when the process should exit (the +** process exits when the last user thread exits). +** +** Threads also have a "scope flag" which controls whether the threads +** are scheduled in the local scope or scheduled by the OS globally. This +** indicates whether a thread is permanently bound to a native OS thread. +** An unbound thread competes for scheduling resources in the same process. +** +** Another flag is "state flag" which control whether the thread is joinable. +** It allows other threads to wait for the created thread to reach completion. +** +** Threads can have "per-thread-data" attached to them. Each thread has a +** per-thread error number and error string which are updated when NSPR +** operations fail. +*/ +#include "prtypes.h" +#include "prinrval.h" + +#ifdef VBOX_WITH_XPCOM_NAMESPACE_CLEANUP +#define PR_CreateThread VBoxNsprPR_CreateThread +#define PR_JoinThread VBoxNsprPR_JoinThread +#define PR_Sleep VBoxNsprPR_Sleep +#define PR_GetCurrentThread VBoxNsprPR_GetCurrentThread +#define PR_GetThreadState VBoxNsprPR_GetThreadState +#define PR_SetThreadPrivate VBoxNsprPR_SetThreadPrivate +#define PR_GetThreadPrivate VBoxNsprPR_GetThreadPrivate +#define PR_NewThreadPrivateIndex VBoxNsprPR_NewThreadPrivateIndex +#define PR_GetThreadPriority VBoxNsprPR_GetThreadPriority +#define PR_SetThreadPriority VBoxNsprPR_SetThreadPriority +#define PR_Interrupt VBoxNsprPR_Interrupt +#define PR_ClearInterrupt VBoxNsprPR_ClearInterrupt +#define PR_BlockInterrupt VBoxNsprPR_BlockInterrupt +#define PR_UnblockInterrupt VBoxNsprPR_UnblockInterrupt +#define PR_GetThreadScope VBoxNsprPR_GetThreadScope +#define PR_GetThreadType VBoxNsprPR_GetThreadType +#endif /* VBOX_WITH_XPCOM_NAMESPACE_CLEANUP */ + +PR_BEGIN_EXTERN_C + +typedef struct PRThread PRThread; +typedef struct PRThreadStack PRThreadStack; + +typedef enum PRThreadType { + PR_USER_THREAD, + PR_SYSTEM_THREAD +} PRThreadType; + +typedef enum PRThreadScope { + PR_LOCAL_THREAD, + PR_GLOBAL_THREAD, + PR_GLOBAL_BOUND_THREAD +} PRThreadScope; + +typedef enum PRThreadState { + PR_JOINABLE_THREAD, + PR_UNJOINABLE_THREAD +} PRThreadState; + +typedef enum PRThreadPriority +{ + PR_PRIORITY_FIRST = 0, /* just a placeholder */ + PR_PRIORITY_LOW = 0, /* the lowest possible priority */ + PR_PRIORITY_NORMAL = 1, /* most common expected priority */ + PR_PRIORITY_HIGH = 2, /* slightly more aggressive scheduling */ + PR_PRIORITY_URGENT = 3, /* it does little good to have more than one */ + PR_PRIORITY_LAST = 3 /* this is just a placeholder */ +} PRThreadPriority; + +/* +** Create a new thread: +** "type" is the type of thread to create +** "start(arg)" will be invoked as the threads "main" +** "priority" will be created thread's priority +** "scope" will specify whether the thread is local or global +** "state" will specify whether the thread is joinable or not +** "stackSize" the size of the stack, in bytes. The value can be zero +** and then a machine specific stack size will be chosen. +** +** This can return NULL if some kind of error occurs, such as if memory is +** tight. +** +** If you want the thread to start up waiting for the creator to do +** something, enter a lock before creating the thread and then have the +** threads start routine enter and exit the same lock. When you are ready +** for the thread to run, exit the lock. +** +** If you want to detect the completion of the created thread, the thread +** should be created joinable. Then, use PR_JoinThread to synchrnoize the +** termination of another thread. +** +** When the start function returns the thread exits. If it is the last +** PR_USER_THREAD to exit then the process exits. +*/ +NSPR_API(PRThread*) PR_CreateThread(PRThreadType type, + void (PR_CALLBACK *start)(void *arg), + void *arg, + PRThreadPriority priority, + PRThreadScope scope, + PRThreadState state, + PRUint32 stackSize); + +/* +** Wait for thread termination: +** "thread" is the target thread +** +** This can return PR_FAILURE if no joinable thread could be found +** corresponding to the specified target thread. +** +** The calling thread is blocked until the target thread completes. +** Several threads cannot wait for the same thread to complete; one thread +** will operate successfully and others will terminate with an error PR_FAILURE. +** The calling thread will not be blocked if the target thread has already +** terminated. +*/ +NSPR_API(PRStatus) PR_JoinThread(PRThread *thread); + +/* +** Return the current thread object for the currently running code. +** Never returns NULL. +*/ +NSPR_API(PRThread*) PR_GetCurrentThread(void); +#ifndef NO_NSPR_10_SUPPORT +#define PR_CurrentThread() PR_GetCurrentThread() /* for nspr1.0 compat. */ +#endif /* NO_NSPR_10_SUPPORT */ + +/* +** Get the priority of "thread". +*/ +NSPR_API(PRThreadPriority) PR_GetThreadPriority(const PRThread *thread); + +/* +** Change the priority of the "thread" to "priority". +*/ +NSPR_API(void) PR_SetThreadPriority(PRThread *thread, PRThreadPriority priority); + +/* +** This routine returns a new index for per-thread-private data table. +** The index is visible to all threads within a process. This index can +** be used with the PR_SetThreadPrivate() and PR_GetThreadPrivate() routines +** to save and retrieve data associated with the index for a thread. +** +** Each index is associationed with a destructor function ('dtor'). The function +** may be specified as NULL when the index is created. If it is not NULL, the +** function will be called when: +** - the thread exits and the private data for the associated index +** is not NULL, +** - new thread private data is set and the current private data is +** not NULL. +** +** The index independently maintains specific values for each binding thread. +** A thread can only get access to its own thread-specific-data. +** +** Upon a new index return the value associated with the index for all threads +** is NULL, and upon thread creation the value associated with all indices for +** that thread is NULL. +** +** Returns PR_FAILURE if the total number of indices will exceed the maximun +** allowed. +*/ +typedef void (PR_CALLBACK *PRThreadPrivateDTOR)(void *priv); + +NSPR_API(PRStatus) PR_NewThreadPrivateIndex( + PRUintn *newIndex, PRThreadPrivateDTOR destructor); + +/* +** Define some per-thread-private data. +** "tpdIndex" is an index into the per-thread private data table +** "priv" is the per-thread-private data +** +** If the per-thread private data table has a previously registered +** destructor function and a non-NULL per-thread-private data value, +** the destructor function is invoked. +** +** This can return PR_FAILURE if the index is invalid. +*/ +NSPR_API(PRStatus) PR_SetThreadPrivate(PRUintn tpdIndex, void *priv); + +/* +** Recover the per-thread-private data for the current thread. "tpdIndex" is +** the index into the per-thread private data table. +** +** The returned value may be NULL which is indistinguishable from an error +** condition. +** +** A thread can only get access to its own thread-specific-data. +*/ +NSPR_API(void*) PR_GetThreadPrivate(PRUintn tpdIndex); + +/* +** This routine sets the interrupt request for a target thread. The interrupt +** request remains in the thread's state until it is delivered exactly once +** or explicitly canceled. +** +** A thread that has been interrupted will fail all NSPR blocking operations +** that return a PRStatus (I/O, waiting on a condition, etc). +** +** PR_Interrupt may itself fail if the target thread is invalid. +*/ +NSPR_API(PRStatus) PR_Interrupt(PRThread *thread); + +/* +** Clear the interrupt request for the calling thread. If no such request +** is pending, this operation is a noop. +*/ +NSPR_API(void) PR_ClearInterrupt(void); + +/* +** Block the interrupt for the calling thread. +*/ +NSPR_API(void) PR_BlockInterrupt(void); + +/* +** Unblock the interrupt for the calling thread. +*/ +NSPR_API(void) PR_UnblockInterrupt(void); + +/* +** Make the current thread sleep until "ticks" time amount of time +** has expired. If "ticks" is PR_INTERVAL_NO_WAIT then the call is +** equivalent to calling PR_Yield. Calling PR_Sleep with an argument +** equivalent to PR_INTERVAL_NO_TIMEOUT is an error and will result +** in a PR_FAILURE error return. +*/ +NSPR_API(PRStatus) PR_Sleep(PRIntervalTime ticks); + +/* +** Get the scoping of this thread. +*/ +NSPR_API(PRThreadScope) PR_GetThreadScope(const PRThread *thread); + +/* +** Get the type of this thread. +*/ +NSPR_API(PRThreadType) PR_GetThreadType(const PRThread *thread); + +/* +** Get the join state of this thread. +*/ +NSPR_API(PRThreadState) PR_GetThreadState(const PRThread *thread); + +PR_END_EXTERN_C + +#endif /* prthread_h___ */ -- cgit v1.2.3