From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c | 234 ++++++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c') diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c b/src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c new file mode 100644 index 00000000..c17a93f7 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c @@ -0,0 +1,234 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + + +/* +** name io_timeoutu.c +** Description: Test socket IO timeouts (user level) +** +** Modification History: +** 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag. +** The debug mode will print all of the printfs associated with this test. +** The regress mode will be the default mode. Since the regress tool limits +** the output to a one line status:PASS or FAIL,all of the printf statements +** have been handled with an if (debug_mode) statement. +** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to +** recognize the return code from tha main program. +***********************************************************************/ +/*********************************************************************** +** Includes +***********************************************************************/ +/* Used to get the command line option */ +#include "plgetopt.h" + +#include +#include "nspr.h" + +#define NUM_THREADS 1 +#define BASE_PORT 8000 +#define DEFAULT_ACCEPT_TIMEOUT 2 + +typedef struct threadInfo { + PRInt16 id; + PRInt16 accept_timeout; + PRLock *dead_lock; + PRCondVar *dead_cv; + PRInt32 *alive; +} threadInfo; +PRIntn failed_already=0; +PRIntn debug_mode; + +void +thread_main(void *_info) +{ + threadInfo *info = (threadInfo *)_info; + PRNetAddr listenAddr; + PRNetAddr clientAddr; + PRFileDesc *listenSock = NULL; + PRFileDesc *clientSock; + PRStatus rv; + + if (debug_mode) printf("thread %d is alive\n", info->id); + + listenSock = PR_NewTCPSocket(); + if (!listenSock) { + if (debug_mode) printf("unable to create listen socket\n"); + goto dead; + } + + listenAddr.inet.family = AF_INET; + listenAddr.inet.port = PR_htons(BASE_PORT + info->id); + listenAddr.inet.ip = PR_htonl(INADDR_ANY); + rv = PR_Bind(listenSock, &listenAddr); + if (rv == PR_FAILURE) { + if (debug_mode) printf("unable to bind\n"); + goto dead; + } + + rv = PR_Listen(listenSock, 4); + if (rv == PR_FAILURE) { + if (debug_mode) printf("unable to listen\n"); + goto dead; + } + + if (debug_mode) printf("thread %d going into accept for %d seconds\n", + info->id, info->accept_timeout + info->id); + + clientSock = PR_Accept( + listenSock, &clientAddr, PR_SecondsToInterval( + info->accept_timeout + info->id)); + + if (clientSock == NULL) { + if (PR_GetError() == PR_IO_TIMEOUT_ERROR) + if (debug_mode) { + printf("PR_Accept() timeout worked!\n"); + printf("TEST FAILED! PR_Accept() returned error %d\n", + } + PR_GetError()); + else failed_already=1; + } else { + if (debug_mode) printf ("TEST FAILED! PR_Accept() succeeded?\n"); + else failed_already=1; + PR_Close(clientSock); + } + +dead: + if (listenSock) { + PR_Close(listenSock); + } + PR_Lock(info->dead_lock); + (*info->alive)--; + PR_NotifyCondVar(info->dead_cv); + PR_Unlock(info->dead_lock); + + if (debug_mode) printf("thread %d is dead\n", info->id); +} + +void +thread_test(PRInt32 scope, PRInt32 num_threads) +{ + PRInt32 index; + PRThread *thr; + PRLock *dead_lock; + PRCondVar *dead_cv; + PRInt32 alive; + + if (debug_mode) printf("IO Timeout test started with %d threads\n", num_threads); + + dead_lock = PR_NewLock(); + dead_cv = PR_NewCondVar(dead_lock); + alive = num_threads; + + for (index = 0; index < num_threads; index++) { + threadInfo *info = (threadInfo *)malloc(sizeof(threadInfo)); + + info->id = index; + info->dead_lock = dead_lock; + info->dead_cv = dead_cv; + info->alive = &alive; + info->accept_timeout = DEFAULT_ACCEPT_TIMEOUT; + + thr = PR_CreateThread( PR_USER_THREAD, + thread_main, + (void *)info, + PR_PRIORITY_NORMAL, + scope, + PR_UNJOINABLE_THREAD, + 0); + + if (!thr) { + PR_Lock(dead_lock); + alive--; + PR_Unlock(dead_lock); + } + } + + PR_Lock(dead_lock); + while(alive) { + if (debug_mode) printf("main loop awake; alive = %d\n", alive); + PR_WaitCondVar(dead_cv, PR_INTERVAL_NO_TIMEOUT); + } + PR_Unlock(dead_lock); +} + +int main(int argc, char **argv) +{ + PRInt32 num_threads; + + /* The command line argument: -d is used to determine if the test is being run + in debug mode. The regress tool requires only one line output:PASS or FAIL. + All of the printfs associated with this test has been handled with a if (debug_mode) + test. + Usage: test_name -d + */ + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "d:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug mode */ + debug_mode = 1; + break; + default: + break; + } + } + PL_DestroyOptState(opt); + + /* main test */ + + if (argc > 2) + num_threads = atoi(argv[2]); + else + num_threads = NUM_THREADS; + + PR_Init(PR_USER_THREAD, PR_PRIORITY_LOW, 0); + PR_STDIO_INIT(); + + if (debug_mode) printf("user level test\n"); + thread_test(PR_LOCAL_THREAD, num_threads); + + PR_Cleanup(); + if(failed_already) + return 1; + else + return 0; + + +} -- cgit v1.2.3