From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/nsprpub/pr/tests/join.c | 264 +++++++++++++++++++++++++++++ 1 file changed, 264 insertions(+) create mode 100644 src/libs/xpcom18a4/nsprpub/pr/tests/join.c (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/join.c') diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/join.c b/src/libs/xpcom18a4/nsprpub/pr/tests/join.c new file mode 100644 index 00000000..73d7eb83 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/join.c @@ -0,0 +1,264 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/*********************************************************************** +** +** Name: dbmalloc1.c +** +** Description: Tests PR_SetMallocCountdown PR_ClearMallocCountdown functions. +** +** Modification History: +** +** 19-May-97 AGarcia - separate the four join tests into different unit test modules. +** AGarcia- Converted the test to accomodate the debug_mode flag. +** The debug mode will print all of the printfs associated with this test. +** The regress mode will be the default mode. Since the regress tool limits +** the output to a one line status:PASS or FAIL,all of the printf statements +** have been handled with an if (debug_mode) statement. +***********************************************************************/ + +/*********************************************************************** +** Includes +***********************************************************************/ +/* Used to get the command line option */ +#include "plgetopt.h" +#include "prttools.h" + +#include "nspr.h" + +#include +#include +#include + +#ifdef XP_MAC +#include "prlog.h" +#define printf PR_LogPrint +extern void SetupMacPrintfLog(char *logFile); +#endif +/*********************************************************************** +** PRIVATE FUNCTION: Test_Result +** DESCRIPTION: Used in conjunction with the regress tool, prints out the +** status of the test case. +** INPUTS: PASS/FAIL +** OUTPUTS: None +** RETURN: None +** SIDE EFFECTS: +** +** RESTRICTIONS: +** None +** MEMORY: NA +** ALGORITHM: Determine what the status is and print accordingly. +** +***********************************************************************/ + + +static void Test_Result (int result) +{ + if (result == PASS) + printf ("PASS\n"); + else + printf ("FAIL\n"); + exit (1); +} + + +/* + Program to test joining of threads. Two threads are created. One + to be waited upon until it has started. The other to join after it has + completed. +*/ + + +static void PR_CALLBACK lowPriority(void *arg) +{ +} + +static void PR_CALLBACK highPriority(void *arg) +{ +} + +static void PR_CALLBACK unjoinable(void *arg) +{ + PR_Sleep(PR_INTERVAL_NO_TIMEOUT); +} + +void runTest(PRThreadScope scope1, PRThreadScope scope2) +{ + PRThread *low,*high; + + /* create the low and high priority threads */ + + low = PR_CreateThread(PR_USER_THREAD, + lowPriority, 0, + PR_PRIORITY_LOW, + scope1, + PR_JOINABLE_THREAD, + 0); + if (!low) { + if (debug_mode) printf("\tcannot create low priority thread\n"); + else Test_Result(FAIL); + return; + } + + high = PR_CreateThread(PR_USER_THREAD, + highPriority, 0, + PR_PRIORITY_HIGH, + scope2, + PR_JOINABLE_THREAD, + 0); + if (!high) { + if (debug_mode) printf("\tcannot create high priority thread\n"); + else Test_Result(FAIL); + return; + } + + /* Do the joining for both threads */ + if (PR_JoinThread(low) == PR_FAILURE) { + if (debug_mode) printf("\tcannot join low priority thread\n"); + else Test_Result (FAIL); + return; + } else { + if (debug_mode) printf("\tjoined low priority thread\n"); + } + if (PR_JoinThread(high) == PR_FAILURE) { + if (debug_mode) printf("\tcannot join high priority thread\n"); + else Test_Result(FAIL); + return; + } else { + if (debug_mode) printf("\tjoined high priority thread\n"); + } +} + +void joinWithUnjoinable(void) +{ + PRThread *thread; + + /* create the unjoinable thread */ + + thread = PR_CreateThread(PR_USER_THREAD, + unjoinable, 0, + PR_PRIORITY_NORMAL, + PR_GLOBAL_THREAD, + PR_UNJOINABLE_THREAD, + 0); + if (!thread) { + if (debug_mode) printf("\tcannot create unjoinable thread\n"); + else Test_Result(FAIL); + return; + } + + if (PR_JoinThread(thread) == PR_SUCCESS) { + if (debug_mode) printf("\tsuccessfully joined with unjoinable thread?!\n"); + else Test_Result(FAIL); + return; + } else { + if (debug_mode) printf("\tcannot join with unjoinable thread, as expected\n"); + if (PR_GetError() != PR_INVALID_ARGUMENT_ERROR) { + if (debug_mode) printf("\tWrong error code\n"); + else Test_Result(FAIL); + return; + } + } + if (PR_Interrupt(thread) == PR_FAILURE) { + if (debug_mode) printf("\tcannot interrupt unjoinable thread\n"); + else Test_Result(FAIL); + return; + } else { + if (debug_mode) printf("\tinterrupted unjoinable thread\n"); + } +} + +static PRIntn PR_CALLBACK RealMain(int argc, char **argv) +{ + /* The command line argument: -d is used to determine if the test is being run + in debug mode. The regress tool requires only one line output:PASS or FAIL. + All of the printfs associated with this test has been handled with a if (debug_mode) + test. + Usage: test_name -d + */ + + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "d:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug mode */ + debug_mode = 1; + break; + default: + break; + } + } + PL_DestroyOptState(opt); + +#ifdef XP_MAC + SetupMacPrintfLog("join.log"); + debug_mode = 1; +#endif + + + + /* main test */ + printf("User-User test\n"); + runTest(PR_LOCAL_THREAD, PR_LOCAL_THREAD); + printf("User-Kernel test\n"); + runTest(PR_LOCAL_THREAD, PR_GLOBAL_THREAD); + printf("Kernel-User test\n"); + runTest(PR_GLOBAL_THREAD, PR_LOCAL_THREAD); + printf("Kernel-Kernel test\n"); + runTest(PR_GLOBAL_THREAD, PR_GLOBAL_THREAD); + printf("Join with unjoinable thread\n"); + joinWithUnjoinable(); + + printf("PASSED\n"); + + return 0; +} + + + + +PRIntn main(PRIntn argc, char *argv[]) +{ + PRIntn rv; + + PR_STDIO_INIT(); + rv = PR_Initialize(RealMain, argc, argv, 0); + return rv; +} /* main */ -- cgit v1.2.3