From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/nsprpub/pr/tests/layer.c | 465 ++++++++++++++++++++++++++++ 1 file changed, 465 insertions(+) create mode 100644 src/libs/xpcom18a4/nsprpub/pr/tests/layer.c (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/layer.c') diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/layer.c b/src/libs/xpcom18a4/nsprpub/pr/tests/layer.c new file mode 100644 index 00000000..7eae46a2 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/layer.c @@ -0,0 +1,465 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +#include "prio.h" +#include "prprf.h" +#include "prlog.h" +#include "prnetdb.h" +#include "prthread.h" + +#include "plerror.h" +#include "plgetopt.h" +#include "prwin16.h" + +#include + +/* +** Testing layering of I/O +** +** The layered server +** A thread that acts as a server. It creates a TCP listener with a dummy +** layer pushed on top. Then listens for incoming connections. Each connection +** request for connection will be layered as well, accept one request, echo +** it back and close. +** +** The layered client +** Pretty much what you'd expect. +*/ + +static PRFileDesc *logFile; +static PRDescIdentity identity; +static PRNetAddr server_address; + +static PRIOMethods myMethods; + +typedef enum Verbosity {silent, quiet, chatty, noisy} Verbosity; + +static PRIntn minor_iterations = 5; +static PRIntn major_iterations = 1; +static Verbosity verbosity = quiet; +static PRUint16 default_port = 12273; + +static PRFileDesc *PushLayer(PRFileDesc *stack) +{ + PRFileDesc *layer = PR_CreateIOLayerStub(identity, &myMethods); + PRStatus rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer); + if (verbosity > quiet) + PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer, stack); + PR_ASSERT(PR_SUCCESS == rv); + return stack; +} /* PushLayer */ + +static PRFileDesc *PushNewLayers(PRFileDesc *stack) +{ + PRDescIdentity tmp_identity; + PRFileDesc *layer; + PRStatus rv; + + /* push a dummy layer */ + tmp_identity = PR_GetUniqueIdentity("Dummy 1"); + layer = PR_CreateIOLayerStub(tmp_identity, PR_GetDefaultIOMethods()); + rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer); + if (verbosity > quiet) + PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer, + stack); + PR_ASSERT(PR_SUCCESS == rv); + + /* push a data procesing layer */ + layer = PR_CreateIOLayerStub(identity, &myMethods); + rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer); + if (verbosity > quiet) + PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer, + stack); + PR_ASSERT(PR_SUCCESS == rv); + + /* push another dummy layer */ + tmp_identity = PR_GetUniqueIdentity("Dummy 2"); + layer = PR_CreateIOLayerStub(tmp_identity, PR_GetDefaultIOMethods()); + rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer); + if (verbosity > quiet) + PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer, + stack); + PR_ASSERT(PR_SUCCESS == rv); + return stack; +} /* PushLayer */ + +#if 0 +static PRFileDesc *PopLayer(PRFileDesc *stack) +{ + PRFileDesc *popped = PR_PopIOLayer(stack, identity); + if (verbosity > quiet) + PR_fprintf(logFile, "Popped layer(0x%x) from stack(0x%x)\n", popped, stack); + popped->dtor(popped); + + return stack; +} /* PopLayer */ +#endif + +static void PR_CALLBACK Client(void *arg) +{ + PRStatus rv; + PRUint8 buffer[100]; + PRIntn empty_flags = 0; + PRIntn bytes_read, bytes_sent; + PRFileDesc *stack = (PRFileDesc*)arg; + + /* Initialize the buffer so that Purify won't complain */ + memset(buffer, 0, sizeof(buffer)); + + rv = PR_Connect(stack, &server_address, PR_INTERVAL_NO_TIMEOUT); + PR_ASSERT(PR_SUCCESS == rv); + while (minor_iterations-- > 0) + { + bytes_sent = PR_Send( + stack, buffer, sizeof(buffer), empty_flags, PR_INTERVAL_NO_TIMEOUT); + PR_ASSERT(sizeof(buffer) == bytes_sent); + if (verbosity > chatty) + PR_fprintf(logFile, "Client sending %d bytes\n", bytes_sent); + bytes_read = PR_Recv( + stack, buffer, bytes_sent, empty_flags, PR_INTERVAL_NO_TIMEOUT); + if (verbosity > chatty) + PR_fprintf(logFile, "Client receiving %d bytes\n", bytes_read); + PR_ASSERT(bytes_read == bytes_sent); + } + + if (verbosity > quiet) + PR_fprintf(logFile, "Client shutting down stack\n"); + + rv = PR_Shutdown(stack, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv); +} /* Client */ + +static void PR_CALLBACK Server(void *arg) +{ + PRStatus rv; + PRUint8 buffer[100]; + PRFileDesc *service; + PRUintn empty_flags = 0; + PRIntn bytes_read, bytes_sent; + PRFileDesc *stack = (PRFileDesc*)arg; + PRNetAddr client_address; + + service = PR_Accept(stack, &client_address, PR_INTERVAL_NO_TIMEOUT); + if (verbosity > quiet) + PR_fprintf(logFile, "Server accepting connection\n"); + + do + { + bytes_read = PR_Recv( + service, buffer, sizeof(buffer), empty_flags, PR_INTERVAL_NO_TIMEOUT); + if (0 != bytes_read) + { + if (verbosity > chatty) + PR_fprintf(logFile, "Server receiving %d bytes\n", bytes_read); + PR_ASSERT(bytes_read > 0); + bytes_sent = PR_Send( + service, buffer, bytes_read, empty_flags, PR_INTERVAL_NO_TIMEOUT); + if (verbosity > chatty) + PR_fprintf(logFile, "Server sending %d bytes\n", bytes_sent); + PR_ASSERT(bytes_read == bytes_sent); + } + + } while (0 != bytes_read); + + if (verbosity > quiet) + PR_fprintf(logFile, "Server shutting down and closing stack\n"); + rv = PR_Shutdown(service, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv); + +} /* Server */ + +static PRInt32 PR_CALLBACK MyRecv( + PRFileDesc *fd, void *buf, PRInt32 amount, + PRIntn flags, PRIntervalTime timeout) +{ + char *b = (char*)buf; + PRFileDesc *lo = fd->lower; + PRInt32 rv, readin = 0, request = 0; + rv = lo->methods->recv(lo, &request, sizeof(request), flags, timeout); + if (verbosity > chatty) PR_fprintf( + logFile, "MyRecv sending permission for %d bytes\n", request); + if (0 < rv) + { + if (verbosity > chatty) PR_fprintf( + logFile, "MyRecv received permission request for %d bytes\n", request); + rv = lo->methods->send( + lo, &request, sizeof(request), flags, timeout); + if (0 < rv) + { + if (verbosity > chatty) PR_fprintf( + logFile, "MyRecv sending permission for %d bytes\n", request); + while (readin < request) + { + rv = lo->methods->recv( + lo, b + readin, amount - readin, flags, timeout); + if (rv <= 0) break; + if (verbosity > chatty) PR_fprintf( + logFile, "MyRecv received %d bytes\n", rv); + readin += rv; + } + rv = readin; + } + } + return rv; +} /* MyRecv */ + +static PRInt32 PR_CALLBACK MySend( + PRFileDesc *fd, const void *buf, PRInt32 amount, + PRIntn flags, PRIntervalTime timeout) +{ + PRFileDesc *lo = fd->lower; + const char *b = (const char*)buf; + PRInt32 rv, wroteout = 0, request; + if (verbosity > chatty) PR_fprintf( + logFile, "MySend asking permission to send %d bytes\n", amount); + rv = lo->methods->send(lo, &amount, sizeof(amount), flags, timeout); + if (0 < rv) + { + rv = lo->methods->recv( + lo, &request, sizeof(request), flags, timeout); + if (0 < rv) + { + PR_ASSERT(request == amount); + if (verbosity > chatty) PR_fprintf( + logFile, "MySend got permission to send %d bytes\n", request); + while (wroteout < request) + { + rv = lo->methods->send( + lo, b + wroteout, request - wroteout, flags, timeout); + if (rv <= 0) break; + if (verbosity > chatty) PR_fprintf( + logFile, "MySend wrote %d bytes\n", rv); + wroteout += rv; + } + rv = amount; + } + } + return rv; +} /* MySend */ + +static Verbosity ChangeVerbosity(Verbosity verbosity, PRIntn delta) +{ + PRIntn verbage = (PRIntn)verbosity + delta; + if (verbage < (PRIntn)silent) verbage = (PRIntn)silent; + else if (verbage > (PRIntn)noisy) verbage = (PRIntn)noisy; + return (Verbosity)verbage; +} /* ChangeVerbosity */ + +PRIntn main(PRIntn argc, char **argv) +{ + PRStatus rv; + PRIntn mits; + PLOptStatus os; + PRFileDesc *client, *service; + PRFileDesc *client_stack, *service_stack; + PRNetAddr any_address; + const char *server_name = NULL; + const PRIOMethods *stubMethods; + PRThread *client_thread, *server_thread; + PRThreadScope thread_scope = PR_LOCAL_THREAD; + PLOptState *opt = PL_CreateOptState(argc, argv, "dqGC:c:p:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 0: + server_name = opt->value; + break; + case 'd': /* debug mode */ + if (verbosity < noisy) + verbosity = ChangeVerbosity(verbosity, 1); + break; + case 'q': /* debug mode */ + if (verbosity > silent) + verbosity = ChangeVerbosity(verbosity, -1); + break; + case 'G': /* use global threads */ + thread_scope = PR_GLOBAL_THREAD; + break; + case 'C': /* number of threads waiting */ + major_iterations = atoi(opt->value); + break; + case 'c': /* number of client threads */ + minor_iterations = atoi(opt->value); + break; + case 'p': /* default port */ + default_port = atoi(opt->value); + break; + default: + break; + } + } + PL_DestroyOptState(opt); + PR_STDIO_INIT(); + + logFile = PR_GetSpecialFD(PR_StandardError); + + identity = PR_GetUniqueIdentity("Dummy"); + stubMethods = PR_GetDefaultIOMethods(); + + /* + ** The protocol we're going to implement is one where in order to initiate + ** a send, the sender must first solicit permission. Therefore, every + ** send is really a send - receive - send sequence. + */ + myMethods = *stubMethods; /* first get the entire batch */ + myMethods.recv = MyRecv; /* then override the ones we care about */ + myMethods.send = MySend; /* then override the ones we care about */ + + if (NULL == server_name) + rv = PR_InitializeNetAddr( + PR_IpAddrLoopback, default_port, &server_address); + else + { + rv = PR_StringToNetAddr(server_name, &server_address); + PR_ASSERT(PR_SUCCESS == rv); + rv = PR_InitializeNetAddr( + PR_IpAddrNull, default_port, &server_address); + } + PR_ASSERT(PR_SUCCESS == rv); + + /* one type w/o layering */ + + mits = minor_iterations; + while (major_iterations-- > 0) + { + if (verbosity > silent) + PR_fprintf(logFile, "Beginning non-layered test\n"); + client = PR_NewTCPSocket(); PR_ASSERT(NULL != client); + service = PR_NewTCPSocket(); PR_ASSERT(NULL != service); + rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address); + PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv); + + minor_iterations = mits; + server_thread = PR_CreateThread( + PR_USER_THREAD, Server, service, + PR_PRIORITY_HIGH, thread_scope, + PR_JOINABLE_THREAD, 16 * 1024); + PR_ASSERT(NULL != server_thread); + + client_thread = PR_CreateThread( + PR_USER_THREAD, Client, client, + PR_PRIORITY_NORMAL, thread_scope, + PR_JOINABLE_THREAD, 16 * 1024); + PR_ASSERT(NULL != client_thread); + + rv = PR_JoinThread(client_thread); + PR_ASSERT(PR_SUCCESS == rv); + rv = PR_JoinThread(server_thread); + PR_ASSERT(PR_SUCCESS == rv); + + rv = PR_Close(client); PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv); + if (verbosity > silent) + PR_fprintf(logFile, "Ending non-layered test\n"); + + /* with layering */ + if (verbosity > silent) + PR_fprintf(logFile, "Beginning layered test\n"); + client = PR_NewTCPSocket(); PR_ASSERT(NULL != client); + PushLayer(client); + service = PR_NewTCPSocket(); PR_ASSERT(NULL != service); + PushLayer(service); + rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address); + PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv); + + minor_iterations = mits; + server_thread = PR_CreateThread( + PR_USER_THREAD, Server, service, + PR_PRIORITY_HIGH, thread_scope, + PR_JOINABLE_THREAD, 16 * 1024); + PR_ASSERT(NULL != server_thread); + + client_thread = PR_CreateThread( + PR_USER_THREAD, Client, client, + PR_PRIORITY_NORMAL, thread_scope, + PR_JOINABLE_THREAD, 16 * 1024); + PR_ASSERT(NULL != client_thread); + + rv = PR_JoinThread(client_thread); + PR_ASSERT(PR_SUCCESS == rv); + rv = PR_JoinThread(server_thread); + PR_ASSERT(PR_SUCCESS == rv); + + rv = PR_Close(client); PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv); + /* with layering, using new style stack */ + if (verbosity > silent) + PR_fprintf(logFile, + "Beginning layered test with new style stack\n"); + client = PR_NewTCPSocket(); PR_ASSERT(NULL != client); + client_stack = PR_CreateIOLayer(client); + PushNewLayers(client_stack); + service = PR_NewTCPSocket(); PR_ASSERT(NULL != service); + service_stack = PR_CreateIOLayer(service); + PushNewLayers(service_stack); + rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address); + PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv); + + minor_iterations = mits; + server_thread = PR_CreateThread( + PR_USER_THREAD, Server, service_stack, + PR_PRIORITY_HIGH, thread_scope, + PR_JOINABLE_THREAD, 16 * 1024); + PR_ASSERT(NULL != server_thread); + + client_thread = PR_CreateThread( + PR_USER_THREAD, Client, client_stack, + PR_PRIORITY_NORMAL, thread_scope, + PR_JOINABLE_THREAD, 16 * 1024); + PR_ASSERT(NULL != client_thread); + + rv = PR_JoinThread(client_thread); + PR_ASSERT(PR_SUCCESS == rv); + rv = PR_JoinThread(server_thread); + PR_ASSERT(PR_SUCCESS == rv); + + rv = PR_Close(client_stack); PR_ASSERT(PR_SUCCESS == rv); + rv = PR_Close(service_stack); PR_ASSERT(PR_SUCCESS == rv); + if (verbosity > silent) + PR_fprintf(logFile, "Ending layered test\n"); + } + return 0; +} /* main */ + +/* layer.c */ -- cgit v1.2.3