From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c | 317 +++++++++++++++++++++++++++ 1 file changed, 317 insertions(+) create mode 100644 src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c') diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c b/src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c new file mode 100644 index 00000000..44e2a608 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/ntioto.c @@ -0,0 +1,317 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* +** File: ntioto.c +** Description: +** This test, ntioto.c, was designed to reproduce a bug reported by NES +** on WindowsNT (fibers implementation). NSPR was asserting in ntio.c +** after PR_AcceptRead() had timed out. I/O performed subsequent to the +** call to PR_AcceptRead() could complete on a CPU other than the one +** on which it was started. The assert in ntio.c detected this, then +** asserted. +** +** Design: +** This test will fail with an assert in ntio.c if the problem it was +** designed to catch occurs. It returns 0 otherwise. +** +** The main() thread initializes and tears things down. A file is +** opened for writing; this file will be written to by AcceptThread() +** and JitterThread(). Main() creates a socket for reading, listens +** and binds the socket. +** +** ConnectThread() connects to the socket created by main, then polls +** the "state" variable. When state is AllDone, ConnectThread() exits. +** +** AcceptThread() calls PR_AcceptRead() on the socket. He fully expects +** it to time out. After the timeout, AccpetThread() interacts with +** JitterThread() via a common condition variable and the state +** variable. The two threads ping-pong back and forth, each thread +** writes the the file opened by main. This should provoke the +** condition reported by NES (if we didn't fix it). +** +** The failure is not solid. It may fail within a few ping-pongs between +** AcceptThread() and JitterThread() or may take a while. The default +** iteration count, jitter, is set by DEFAULT_JITTER. This may be +** modified at the command line with the -j option. +** +*/ + +#include +#include +#include +#include +#include + +/* +** Test harness infrastructure +*/ +PRLogModuleInfo *lm; +PRLogModuleLevel msgLevel = PR_LOG_NONE; +PRIntn debug = 0; +PRIntn verbose = 0; +PRUint32 failed_already = 0; +/* end Test harness infrastructure */ + +/* JITTER_DEFAULT: the number of times AcceptThread() and JitterThread() ping-pong */ +#define JITTER_DEFAULT 100000 +#define BASE_PORT 9867 + +PRIntervalTime timeout; +PRNetAddr listenAddr; +PRFileDesc *listenSock; +PRLock *ml; +PRCondVar *cv; +volatile enum { + RunJitter, + RunAcceptRead, + AllDone +} state = RunAcceptRead; +PRFileDesc *file1; +PRIntn iCounter = 0; +PRIntn jitter = JITTER_DEFAULT; +PRBool resume = PR_FALSE; + +/* +** Emit help text for this test +*/ +static void Help( void ) +{ + printf("Template: Help(): display your help message(s) here"); + exit(1); +} /* end Help() */ + + +/* +** static computation of PR_AcceptRead() buffer size. +*/ +#define ACCEPT_READ_DATASIZE 10 +#define ACCEPT_READ_BUFSIZE (PR_ACCEPT_READ_BUF_OVERHEAD + ACCEPT_READ_DATASIZE) + +static void AcceptThread(void *arg) +{ + PRIntn bytesRead; + char dataBuf[ACCEPT_READ_BUFSIZE]; + PRFileDesc *arSock; + PRNetAddr *arAddr; + + bytesRead = PR_AcceptRead( listenSock, + &arSock, + &arAddr, + dataBuf, + ACCEPT_READ_DATASIZE, + PR_SecondsToInterval(1)); + + if ( bytesRead == -1 && PR_GetError() == PR_IO_TIMEOUT_ERROR ) + if ( debug ) printf("AcceptRead timed out\n"); + else + if ( debug ) printf("Oops! read: %d, error: %d\n", bytesRead, PR_GetError()); + + while( state != AllDone ) { + PR_Lock( ml ); + while( state != RunAcceptRead ) + PR_WaitCondVar( cv, PR_INTERVAL_NO_TIMEOUT ); + if ( ++iCounter >= jitter ) + state = AllDone; + else + state = RunJitter; + if ( verbose ) printf("."); + PR_NotifyCondVar( cv ); + PR_Unlock( ml ); + PR_Write( file1, ".", 1 ); + } + + return; +} /* end AcceptThread() */ + +static void JitterThread(void *arg) +{ + while( state != AllDone ) { + PR_Lock( ml ); + while( state != RunJitter && state != AllDone ) + PR_WaitCondVar( cv, PR_INTERVAL_NO_TIMEOUT ); + if ( state != AllDone) + state = RunAcceptRead; + if ( verbose ) printf("+"); + PR_NotifyCondVar( cv ); + PR_Unlock( ml ); + PR_Write( file1, "+", 1 ); + } + return; +} /* end Goofy() */ + +static void ConnectThread( void *arg ) +{ + PRStatus rv; + PRFileDesc *clientSock; + PRNetAddr serverAddress; + clientSock = PR_NewTCPSocket(); + + PR_ASSERT(clientSock); + + if ( resume ) { + if ( debug ) printf("pausing 3 seconds before connect\n"); + PR_Sleep( PR_SecondsToInterval(3)); + } + + memset(&serverAddress, 0, sizeof(serverAddress)); + rv = PR_InitializeNetAddr(PR_IpAddrLoopback, BASE_PORT, &serverAddress); + PR_ASSERT( PR_SUCCESS == rv ); + rv = PR_Connect( clientSock, + &serverAddress, + PR_SecondsToInterval(1)); + PR_ASSERT( PR_SUCCESS == rv ); + + /* that's all we do. ... Wait for the acceptread() to timeout */ + while( state != AllDone ) + PR_Sleep( PR_SecondsToInterval(1)); + return; +} /* end ConnectThread() */ + + +PRIntn main(PRIntn argc, char *argv[]) +{ + PRThread *tJitter; + PRThread *tAccept; + PRThread *tConnect; + PRStatus rv; + /* This test if valid for WinNT only! */ + +#if !defined(WINNT) + return 0; +#endif + + { + /* + ** Get command line options + */ + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "hdrvj:"); + + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug */ + debug = 1; + msgLevel = PR_LOG_ERROR; + break; + case 'v': /* verbose mode */ + verbose = 1; + msgLevel = PR_LOG_DEBUG; + break; + case 'j': + jitter = atoi(opt->value); + if ( jitter == 0) + jitter = JITTER_DEFAULT; + break; + case 'r': + resume = PR_TRUE; + break; + case 'h': /* help message */ + Help(); + break; + default: + break; + } + } + PL_DestroyOptState(opt); + } + + lm = PR_NewLogModule("Test"); /* Initialize logging */ + + /* set concurrency */ + PR_SetConcurrency( 4 ); + + /* setup thread synchronization mechanics */ + ml = PR_NewLock(); + cv = PR_NewCondVar( ml ); + + /* setup a tcp socket */ + memset(&listenAddr, 0, sizeof(listenAddr)); + rv = PR_InitializeNetAddr(PR_IpAddrAny, BASE_PORT, &listenAddr); + PR_ASSERT( PR_SUCCESS == rv ); + + listenSock = PR_NewTCPSocket(); + PR_ASSERT( listenSock ); + + rv = PR_Bind( listenSock, &listenAddr); + PR_ASSERT( PR_SUCCESS == rv ); + + rv = PR_Listen( listenSock, 5 ); + PR_ASSERT( PR_SUCCESS == rv ); + + /* open a file for writing, provoke bug */ + file1 = PR_Open("xxxTestFile", PR_CREATE_FILE | PR_RDWR, 666); + + /* create Connect thread */ + tConnect = PR_CreateThread( + PR_USER_THREAD, ConnectThread, NULL, + PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, + PR_JOINABLE_THREAD, 0 ); + PR_ASSERT( tConnect ); + + /* create jitter off thread */ + tJitter = PR_CreateThread( + PR_USER_THREAD, JitterThread, NULL, + PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, + PR_JOINABLE_THREAD, 0 ); + PR_ASSERT( tJitter ); + + /* create acceptread thread */ + tAccept = PR_CreateThread( + PR_USER_THREAD, AcceptThread, NULL, + PR_PRIORITY_NORMAL, PR_LOCAL_THREAD, + PR_JOINABLE_THREAD, 0 ); + PR_ASSERT( tAccept ); + + /* wait for all threads to quit, then terminate gracefully */ + PR_JoinThread( tConnect ); + PR_JoinThread( tAccept ); + PR_JoinThread( tJitter ); + PR_Close( listenSock ); + PR_DestroyCondVar(cv); + PR_DestroyLock(ml); + PR_Close( file1 ); + PR_Delete( "xxxTestFile"); + + /* test return and exit */ + if (debug) printf("%s\n", (failed_already)? "FAIL" : "PASS"); + return( (failed_already == PR_TRUE )? 1 : 0 ); +} /* main() */ +/* end ntioto.c */ -- cgit v1.2.3