From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/nsprpub/pr/tests/zerolen.c | 282 ++++++++++++++++++++++++++ 1 file changed, 282 insertions(+) create mode 100644 src/libs/xpcom18a4/nsprpub/pr/tests/zerolen.c (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/zerolen.c') diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/zerolen.c b/src/libs/xpcom18a4/nsprpub/pr/tests/zerolen.c new file mode 100644 index 00000000..f43f60fd --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/zerolen.c @@ -0,0 +1,282 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1999-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* + * Test: zerolen.c + * + * Description: a test for Bugzilla bug #17699. We perform + * the same test for PR_Writev, PR_Write, and PR_Send. In + * each test the server thread first fills up the connection + * to the client so that the next write operation will fail + * with EAGAIN. Then it calls PR_Writev, PR_Write, or PR_Send + * with a zero-length buffer. The client thread initially + * does not read so that the connection can be filled up. + * Then it empties the connection so that the server thread's + * PR_Writev, PR_Write, or PR_Send call can succeed. + * + * Bug #17699 is specific to the pthreads version on Unix, + * so on other platforms this test does nothing. + */ + +#ifndef XP_UNIX + +#include + +int main() +{ + printf("PASS\n"); + return 0; +} + +#else /* XP_UNIX */ + +#include "nspr.h" +#include "private/pprio.h" + +#include +#include +#include +#include +#include + +static void ClientThread(void *arg) +{ + PRFileDesc *sock; + PRNetAddr addr; + PRUint16 port = (PRUint16) arg; + char buf[1024]; + PRInt32 nbytes; + + sock = PR_NewTCPSocket(); + if (NULL == sock) { + fprintf(stderr, "PR_NewTCPSocket failed\n"); + exit(1); + } + if (PR_InitializeNetAddr(PR_IpAddrLoopback, port, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_InitializeNetAddr failed\n"); + exit(1); + } + if (PR_Connect(sock, &addr, PR_INTERVAL_NO_TIMEOUT) == PR_FAILURE) { + fprintf(stderr, "PR_Connect failed\n"); + exit(1); + } + /* + * Sleep 5 seconds to force the server thread to get EAGAIN. + */ + if (PR_Sleep(PR_SecondsToInterval(5)) == PR_FAILURE) { + fprintf(stderr, "PR_Sleep failed\n"); + exit(1); + } + /* + * Then start reading. + */ + while ((nbytes = PR_Read(sock, buf, sizeof(buf))) > 0) { + /* empty loop body */ + } + if (-1 == nbytes) { + fprintf(stderr, "PR_Read failed\n"); + exit(1); + } + if (PR_Close(sock) == PR_FAILURE) { + fprintf(stderr, "PR_Close failed\n"); + exit(1); + } +} + +int main() +{ + PRFileDesc *listenSock; + PRFileDesc *acceptSock; + int osfd; + PRThread *clientThread; + PRNetAddr addr; + char buf[1024]; + PRInt32 nbytes; + PRIOVec iov; + + memset(buf, 0, sizeof(buf)); /* Initialize the buffer. */ + listenSock = PR_NewTCPSocket(); + if (NULL == listenSock) { + fprintf(stderr, "PR_NewTCPSocket failed\n"); + exit(1); + } + if (PR_InitializeNetAddr(PR_IpAddrAny, 0, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_InitializeNetAddr failed\n"); + exit(1); + } + if (PR_Bind(listenSock, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_Bind failed\n"); + exit(1); + } + /* Find out what port number we are bound to. */ + if (PR_GetSockName(listenSock, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_GetSockName failed\n"); + exit(1); + } + if (PR_Listen(listenSock, 5) == PR_FAILURE) { + fprintf(stderr, "PR_Listen failed\n"); + exit(1); + } + + /* + * First test PR_Writev. + */ + clientThread = PR_CreateThread(PR_USER_THREAD, + ClientThread, (void *) PR_ntohs(PR_NetAddrInetPort(&addr)), + PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, PR_JOINABLE_THREAD, 0); + if (NULL == clientThread) { + fprintf(stderr, "PR_CreateThread failed\n"); + exit(1); + } + acceptSock = PR_Accept(listenSock, NULL, PR_INTERVAL_NO_TIMEOUT); + if (NULL == acceptSock) { + fprintf(stderr, "PR_Accept failed\n"); + exit(1); + } + osfd = PR_FileDesc2NativeHandle(acceptSock); + while ((nbytes = write(osfd, buf, sizeof(buf))) != -1) { + /* empty loop body */ + } + if ((errno != EAGAIN) && (errno != EWOULDBLOCK)) { + fprintf(stderr, "write failed\n"); + exit(1); + } + iov.iov_base = buf; + iov.iov_len = 0; + printf("calling PR_Writev with a zero-length buffer\n"); + fflush(stdout); + nbytes = PR_Writev(acceptSock, &iov, 1, PR_INTERVAL_NO_TIMEOUT); + if (nbytes != 0) { + fprintf(stderr, "PR_Writev should return 0 but returns %d\n", nbytes); + exit(1); + } + if (PR_Close(acceptSock) == PR_FAILURE) { + fprintf(stderr, "PR_Close failed\n"); + exit(1); + } + if (PR_JoinThread(clientThread) == PR_FAILURE) { + fprintf(stderr, "PR_JoinThread failed\n"); + exit(1); + } + + /* + * Then test PR_Write. + */ + clientThread = PR_CreateThread(PR_USER_THREAD, + ClientThread, (void *) PR_ntohs(PR_NetAddrInetPort(&addr)), + PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, PR_JOINABLE_THREAD, 0); + if (NULL == clientThread) { + fprintf(stderr, "PR_CreateThread failed\n"); + exit(1); + } + acceptSock = PR_Accept(listenSock, NULL, PR_INTERVAL_NO_TIMEOUT); + if (NULL == acceptSock) { + fprintf(stderr, "PR_Accept failed\n"); + exit(1); + } + osfd = PR_FileDesc2NativeHandle(acceptSock); + while ((nbytes = write(osfd, buf, sizeof(buf))) != -1) { + /* empty loop body */ + } + if ((errno != EAGAIN) && (errno != EWOULDBLOCK)) { + fprintf(stderr, "write failed\n"); + exit(1); + } + printf("calling PR_Write with a zero-length buffer\n"); + fflush(stdout); + nbytes = PR_Write(acceptSock, buf, 0); + if (nbytes != 0) { + fprintf(stderr, "PR_Write should return 0 but returns %d\n", nbytes); + exit(1); + } + if (PR_Close(acceptSock) == PR_FAILURE) { + fprintf(stderr, "PR_Close failed\n"); + exit(1); + } + if (PR_JoinThread(clientThread) == PR_FAILURE) { + fprintf(stderr, "PR_JoinThread failed\n"); + exit(1); + } + + /* + * Finally test PR_Send. + */ + clientThread = PR_CreateThread(PR_USER_THREAD, + ClientThread, (void *) PR_ntohs(PR_NetAddrInetPort(&addr)), + PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, PR_JOINABLE_THREAD, 0); + if (NULL == clientThread) { + fprintf(stderr, "PR_CreateThread failed\n"); + exit(1); + } + acceptSock = PR_Accept(listenSock, NULL, PR_INTERVAL_NO_TIMEOUT); + if (NULL == acceptSock) { + fprintf(stderr, "PR_Accept failed\n"); + exit(1); + } + osfd = PR_FileDesc2NativeHandle(acceptSock); + while ((nbytes = write(osfd, buf, sizeof(buf))) != -1) { + /* empty loop body */ + } + if ((errno != EAGAIN) && (errno != EWOULDBLOCK)) { + fprintf(stderr, "write failed\n"); + exit(1); + } + printf("calling PR_Send with a zero-length buffer\n"); + fflush(stdout); + nbytes = PR_Send(acceptSock, buf, 0, 0, PR_INTERVAL_NO_TIMEOUT); + if (nbytes != 0) { + fprintf(stderr, "PR_Send should return 0 but returns %d\n", nbytes); + exit(1); + } + if (PR_Close(acceptSock) == PR_FAILURE) { + fprintf(stderr, "PR_Close failed\n"); + exit(1); + } + if (PR_JoinThread(clientThread) == PR_FAILURE) { + fprintf(stderr, "PR_JoinThread failed\n"); + exit(1); + } + + if (PR_Close(listenSock) == PR_FAILURE) { + fprintf(stderr, "PR_Close failed\n"); + exit(1); + } + printf("PASS\n"); + return 0; +} + +#endif /* XP_UNIX */ -- cgit v1.2.3