From f215e02bf85f68d3a6106c2a1f4f7f063f819064 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 11 Apr 2024 10:17:27 +0200 Subject: Adding upstream version 7.0.14-dfsg. Signed-off-by: Daniel Baumann --- .../xpcom18a4/xpcom/ds/nsISupportsIterators.idl | 325 +++++++++++++++++++++ 1 file changed, 325 insertions(+) create mode 100644 src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl (limited to 'src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl') diff --git a/src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl b/src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl new file mode 100644 index 00000000..f1d8bce1 --- /dev/null +++ b/src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl @@ -0,0 +1,325 @@ +/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is mozilla.org code. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * Scott Collins + * + * Alternatively, the contents of this file may be used under the terms of + * either of the GNU General Public License Version 2 or later (the "GPL"), + * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* nsISupportsIterators.idl --- IDL defining general purpose iterators */ + + +#include "nsISupports.idl" + + + /* + ... + */ + + + /** + * ... + */ +[scriptable, uuid(7330650e-1dd2-11b2-a0c2-9ff86ee97bed)] +interface nsIOutputIterator : nsISupports + { + /** + * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator. + * The iterator and the underlying container or sequence cooperate to |Release()| + * the replaced element, if any and if necessary, and to |AddRef()| the new element. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @param anElementToPut the element to place into the underlying container or sequence + */ + void putElement( in nsISupports anElementToPut ); + + /** + * Advance this iterator to the next position in the underlying container or sequence. + */ + void stepForward(); + }; + + /** + * ... + */ +[scriptable, uuid(85585e12-1dd2-11b2-a930-f6929058269a)] +interface nsIInputIterator : nsISupports + { + /** + * Retrieve (and |AddRef()|) the element this iterator currently points to. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @result a new reference to the element this iterator currently points to (if any) + */ + nsISupports getElement(); + + /** + * Advance this iterator to the next position in the underlying container or sequence. + */ + void stepForward(); + + /** + * Test if |anotherIterator| points to the same position in the underlying container or sequence. + * + * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence. + * + * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence + * @result true if |anotherIterator| points to the same position in the underlying container or sequence + */ + boolean isEqualTo( in nsISupports anotherIterator ); + + /** + * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points. + * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator. + * + * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator + */ + nsISupports clone(); + }; + + /** + * ... + */ +[scriptable, uuid(8da01646-1dd2-11b2-98a7-c7009045be7e)] +interface nsIForwardIterator : nsISupports + { + /** + * Retrieve (and |AddRef()|) the element this iterator currently points to. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @result a new reference to the element this iterator currently points to (if any) + */ + nsISupports getElement(); + + /** + * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator. + * The iterator and the underlying container or sequence cooperate to |Release()| + * the replaced element, if any and if necessary, and to |AddRef()| the new element. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @param anElementToPut the element to place into the underlying container or sequence + */ + void putElement( in nsISupports anElementToPut ); + + /** + * Advance this iterator to the next position in the underlying container or sequence. + */ + void stepForward(); + + /** + * Test if |anotherIterator| points to the same position in the underlying container or sequence. + * + * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence. + * + * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence + * @result true if |anotherIterator| points to the same position in the underlying container or sequence + */ + boolean isEqualTo( in nsISupports anotherIterator ); + + /** + * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points. + * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator. + * + * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator + */ + nsISupports clone(); + }; + + /** + * ... + */ +[scriptable, uuid(948defaa-1dd1-11b2-89f6-8ce81f5ebda9)] +interface nsIBidirectionalIterator : nsISupports + { + /** + * Retrieve (and |AddRef()|) the element this iterator currently points to. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @result a new reference to the element this iterator currently points to (if any) + */ + nsISupports getElement(); + + /** + * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator. + * The iterator and the underlying container or sequence cooperate to |Release()| + * the replaced element, if any and if necessary, and to |AddRef()| the new element. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @param anElementToPut the element to place into the underlying container or sequence + */ + void putElement( in nsISupports anElementToPut ); + + /** + * Advance this iterator to the next position in the underlying container or sequence. + */ + void stepForward(); + + /** + * Move this iterator to the previous position in the underlying container or sequence. + */ + void stepBackward(); + + /** + * Test if |anotherIterator| points to the same position in the underlying container or sequence. + * + * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence. + * + * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence + * @result true if |anotherIterator| points to the same position in the underlying container or sequence + */ + boolean isEqualTo( in nsISupports anotherIterator ); + + /** + * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points. + * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator. + * + * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator + */ + nsISupports clone(); + }; + + /** + * ... + */ +[scriptable, uuid(9bd6fdb0-1dd1-11b2-9101-d15375968230)] +interface nsIRandomAccessIterator : nsISupports + { + /** + * Retrieve (and |AddRef()|) the element this iterator currently points to. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @result a new reference to the element this iterator currently points to (if any) + */ + nsISupports getElement(); + + /** + * Retrieve (and |AddRef()|) an element at some offset from where this iterator currently points. + * The offset may be negative. |getElementAt(0)| is equivalent to |getElement()|. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @param anOffset a |0|-based offset from the position to which this iterator currently points + * @result a new reference to the indicated element (if any) + */ + nsISupports getElementAt( in PRInt32 anOffset ); + + /** + * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator. + * The iterator and the underlying container or sequence cooperate to |Release()| + * the replaced element, if any and if necessary, and to |AddRef()| the new element. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @param anElementToPut the element to place into the underlying container or sequence + */ + void putElement( in nsISupports anElementToPut ); + + /** + * Put |anElementToPut| into the underlying container or sequence at the position |anOffset| away from that currently pointed to by this iterator. + * The iterator and the underlying container or sequence cooperate to |Release()| + * the replaced element, if any and if necessary, and to |AddRef()| the new element. + * |putElementAt(0, obj)| is equivalent to |putElement(obj)|. + * + * The result is undefined if this iterator currently points outside the + * useful range of the underlying container or sequence. + * + * @param anOffset a |0|-based offset from the position to which this iterator currently points + * @param anElementToPut the element to place into the underlying container or sequence + */ + void putElementAt( in PRInt32 anOffset, in nsISupports anElementToPut ); + + /** + * Advance this iterator to the next position in the underlying container or sequence. + */ + void stepForward(); + + /** + * Move this iterator by |anOffset| positions in the underlying container or sequence. + * |anOffset| may be negative. |stepForwardBy(1)| is equivalent to |stepForward()|. + * |stepForwardBy(0)| is a no-op. + * + * @param anOffset a |0|-based offset from the position to which this iterator currently points + */ + void stepForwardBy( in PRInt32 anOffset ); + + /** + * Move this iterator to the previous position in the underlying container or sequence. + */ + void stepBackward(); + + /** + * Move this iterator backwards by |anOffset| positions in the underlying container or sequence. + * |anOffset| may be negative. |stepBackwardBy(1)| is equivalent to |stepBackward()|. + * |stepBackwardBy(n)| is equivalent to |stepForwardBy(-n)|. |stepBackwardBy(0)| is a no-op. + * + * @param anOffset a |0|-based offset from the position to which this iterator currently points + */ + void stepBackwardBy( in PRInt32 anOffset ); + + /** + * Test if |anotherIterator| points to the same position in the underlying container or sequence. + * + * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence. + * + * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence + * @result true if |anotherIterator| points to the same position in the underlying container or sequence + */ + boolean isEqualTo( in nsISupports anotherIterator ); + + /** + * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points. + * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator. + * + * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator + */ + nsISupports clone(); + }; + +%{C++ +%} -- cgit v1.2.3