/* $Id: DevOHCI.cpp $ */ /** @file * DevOHCI - Open Host Controller Interface for USB. */ /* * Copyright (C) 2006-2023 Oracle and/or its affiliates. * * This file is part of VirtualBox base platform packages, as * available from https://www.virtualbox.org. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation, in version 3 of the * License. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * * SPDX-License-Identifier: GPL-3.0-only */ /** @page pg_dev_ohci OHCI - Open Host Controller Interface Emulation. * * This component implements an OHCI USB controller. It is split roughly in * to two main parts, the first part implements the register level * specification of USB OHCI and the second part maintains the root hub (which * is an integrated component of the device). * * The OHCI registers are used for the usual stuff like enabling and disabling * interrupts. Since the USB time is divided in to 1ms frames and various * interrupts may need to be triggered at frame boundary time, a timer-based * approach was taken. Whenever the bus is enabled ohci->eof_timer will be set. * * The actual USB transfers are stored in main memory (along with endpoint and * transfer descriptors). The ED's for all the control and bulk endpoints are * found by consulting the HcControlHeadED and HcBulkHeadED registers * respectively. Interrupt ED's are different, they are found by looking * in the HCCA (another communication area in main memory). * * At the start of every frame (in function ohci_sof) we traverse all enabled * ED lists and queue up as many transfers as possible. No attention is paid * to control/bulk service ratios or bandwidth requirements since our USB * could conceivably contain a dozen high speed busses so this would * artificially limit the performance. * * Once we have a transfer ready to go (in function ohciR3ServiceTd) we * allocate an URB on the stack, fill in all the relevant fields and submit * it using the VUSBIRhSubmitUrb function. The roothub device and the virtual * USB core code (vusb.c) coordinates everything else from this point onwards. * * When the URB has been successfully handed to the lower level driver, our * prepare callback gets called and we can remove the TD from the ED transfer * list. This stops us queueing it twice while it completes. * bird: no, we don't remove it because that confuses the guest! (=> crashes) * * Completed URBs are reaped at the end of every frame (in function * ohci_frame_boundary). Our completion routine makes use of the ED and TD * fields in the URB to store the physical addresses of the descriptors so * that they may be modified in the roothub callbacks. Our completion * routine (ohciR3RhXferCompletion) carries out a number of tasks: * -# Retires the TD associated with the transfer, setting the * relevant error code etc. * -# Updates done-queue interrupt timer and potentially causes * a writeback of the done-queue. * -# If the transfer was device-to-host, we copy the data in to * the host memory. * * As for error handling OHCI allows for 3 retries before failing a transfer, * an error count is stored in each transfer descriptor. A halt flag is also * stored in the transfer descriptor. That allows for ED's to be disabled * without stopping the bus and de-queuing them. * * When the bus is started and stopped we call VUSBIDevPowerOn/Off() on our * roothub to indicate it's powering up and powering down. Whenever we power * down, the USB core makes sure to synchronously complete all outstanding * requests so that the OHCI is never seen in an inconsistent state by the * guest OS (Transfers are not meant to be unlinked until they've actually * completed, but we can't do that unless we work synchronously, so we just * have to fake it). * bird: we do work synchronously now, anything causes guest crashes. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_OHCI #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IN_RING3 # include # include # include # include #endif #include #include "VBoxDD.h" #define VBOX_WITH_OHCI_PHYS_READ_CACHE //#define VBOX_WITH_OHCI_PHYS_READ_STATS /********************************************************************************************************************************* * Structures and Typedefs * *********************************************************************************************************************************/ /** The current saved state version. */ #define OHCI_SAVED_STATE_VERSION OHCI_SAVED_STATE_VERSION_NO_EOF_TIMER /** The current saved state version. * @since 6.1.0beta3/rc1 */ #define OHCI_SAVED_STATE_VERSION_NO_EOF_TIMER 6 /** The current saved with the start-of-frame timer. * @since 4.3.x */ #define OHCI_SAVED_STATE_VERSION_EOF_TIMER 5 /** The saved state with support of up to 8 ports. * @since 3.1 or so */ #define OHCI_SAVED_STATE_VERSION_8PORTS 4 /** Maximum supported number of Downstream Ports on the root hub. 15 ports * is the maximum defined by the OHCI spec. Must match the number of status * register words to the 'opreg' array. */ #define OHCI_NDP_MAX 15 /** Default NDP, chosen to be compatible with everything. */ #define OHCI_NDP_DEFAULT 12 /* Macro to query the number of currently configured ports. */ #define OHCI_NDP_CFG(pohci) ((pohci)->RootHub.desc_a & OHCI_RHA_NDP) /** Macro to convert a EHCI port index (zero based) to a VUSB roothub port ID (one based). */ #define OHCI_PORT_2_VUSB_PORT(a_uPort) ((a_uPort) + 1) /** Pointer to OHCI device data. */ typedef struct OHCI *POHCI; /** Read-only pointer to the OHCI device data. */ typedef struct OHCI const *PCOHCI; #ifndef VBOX_DEVICE_STRUCT_TESTCASE /** * Host controller transfer descriptor data. */ typedef struct VUSBURBHCITDINT { /** Type of TD. */ uint32_t TdType; /** The address of the */ RTGCPHYS32 TdAddr; /** A copy of the TD. */ uint32_t TdCopy[16]; } VUSBURBHCITDINT; /** * The host controller data associated with each URB. */ typedef struct VUSBURBHCIINT { /** The endpoint descriptor address. */ RTGCPHYS32 EdAddr; /** Number of Tds in the array. */ uint32_t cTds; /** When this URB was created. * (Used for isochronous frames and for logging.) */ uint32_t u32FrameNo; /** Flag indicating that the TDs have been unlinked. */ bool fUnlinked; } VUSBURBHCIINT; #endif /** * An OHCI root hub port. */ typedef struct OHCIHUBPORT { /** The port register. */ uint32_t fReg; /** Flag whether there is a device attached to the port. */ bool fAttached; bool afPadding[3]; } OHCIHUBPORT; /** Pointer to an OHCI hub port. */ typedef OHCIHUBPORT *POHCIHUBPORT; /** * The OHCI root hub, shared. */ typedef struct OHCIROOTHUB { uint32_t status; uint32_t desc_a; uint32_t desc_b; #if HC_ARCH_BITS == 64 uint32_t Alignment0; /**< Align aPorts on a 8 byte boundary. */ #endif OHCIHUBPORT aPorts[OHCI_NDP_MAX]; } OHCIROOTHUB; /** Pointer to the OHCI root hub. */ typedef OHCIROOTHUB *POHCIROOTHUB; /** * The OHCI root hub, ring-3 data. * * @implements PDMIBASE * @implements VUSBIROOTHUBPORT * @implements PDMILEDPORTS */ typedef struct OHCIROOTHUBR3 { /** Pointer to the base interface of the VUSB RootHub. */ R3PTRTYPE(PPDMIBASE) pIBase; /** Pointer to the connector interface of the VUSB RootHub. */ R3PTRTYPE(PVUSBIROOTHUBCONNECTOR) pIRhConn; /** The base interface exposed to the roothub driver. */ PDMIBASE IBase; /** The roothub port interface exposed to the roothub driver. */ VUSBIROOTHUBPORT IRhPort; /** The LED. */ PDMLED Led; /** The LED ports. */ PDMILEDPORTS ILeds; /** Partner of ILeds. */ R3PTRTYPE(PPDMILEDCONNECTORS) pLedsConnector; OHCIHUBPORT aPorts[OHCI_NDP_MAX]; R3PTRTYPE(POHCI) pOhci; } OHCIROOTHUBR3; /** Pointer to the OHCI ring-3 root hub data. */ typedef OHCIROOTHUBR3 *POHCIROOTHUBR3; #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE typedef struct OHCIPAGECACHE { /** Last read physical page address. */ RTGCPHYS GCPhysReadCacheAddr; /** Copy of last read physical page. */ uint8_t abPhysReadCache[GUEST_PAGE_SIZE]; } OHCIPAGECACHE; typedef OHCIPAGECACHE *POHCIPAGECACHE; #endif /** * OHCI device data, shared. */ typedef struct OHCI { /** Start of current frame. */ uint64_t SofTime; /** done queue interrupt counter */ uint32_t dqic : 3; /** frame number overflow. */ uint32_t fno : 1; /** Align roothub structure on a 8-byte boundary. */ uint32_t u32Alignment0; /** Root hub device, shared data. */ OHCIROOTHUB RootHub; /* OHCI registers */ /** @name Control partition * @{ */ /** HcControl. */ uint32_t ctl; /** HcCommandStatus. */ uint32_t status; /** HcInterruptStatus. */ uint32_t intr_status; /** HcInterruptEnabled. */ uint32_t intr; /** @} */ /** @name Memory pointer partition * @{ */ /** HcHCCA. */ uint32_t hcca; /** HcPeriodCurrentEd. */ uint32_t per_cur; /** HcControlCurrentED. */ uint32_t ctrl_cur; /** HcControlHeadED. */ uint32_t ctrl_head; /** HcBlockCurrendED. */ uint32_t bulk_cur; /** HcBlockHeadED. */ uint32_t bulk_head; /** HcDoneHead. */ uint32_t done; /** @} */ /** @name Frame counter partition * @{ */ /** HcFmInterval.FSMPS - FSLargestDataPacket */ uint32_t fsmps : 15; /** HcFmInterval.FIT - FrameItervalToggle */ uint32_t fit : 1; /** HcFmInterval.FI - FrameInterval */ uint32_t fi : 14; /** HcFmRemaining.FRT - toggle bit. */ uint32_t frt : 1; /** HcFmNumber. * @remark The register size is 16-bit, but for debugging and performance * reasons we maintain a 32-bit counter. */ uint32_t HcFmNumber; /** HcPeriodicStart */ uint32_t pstart; /** @} */ /** This member and all the following are not part of saved state. */ uint64_t SavedStateEnd; /** The number of virtual time ticks per frame. */ uint64_t cTicksPerFrame; /** The number of virtual time ticks per USB bus tick. */ uint64_t cTicksPerUsbTick; /** Detected canceled isochronous URBs. */ STAMCOUNTER StatCanceledIsocUrbs; /** Detected canceled general URBs. */ STAMCOUNTER StatCanceledGenUrbs; /** Dropped URBs (endpoint halted, or URB canceled). */ STAMCOUNTER StatDroppedUrbs; /** VM timer frequency used for frame timer calculations. */ uint64_t u64TimerHz; /** Idle detection flag; must be cleared at start of frame */ bool fIdle; /** A flag indicating that the bulk list may have in-flight URBs. */ bool fBulkNeedsCleaning; bool afAlignment3[2]; uint32_t Alignment4; /**< Align size on a 8 byte boundary. */ /** Critical section synchronising interrupt handling. */ PDMCRITSECT CsIrq; /** The MMIO region handle. */ IOMMMIOHANDLE hMmio; } OHCI; /** * OHCI device data, ring-3. */ typedef struct OHCIR3 { /** The root hub, ring-3 portion. */ OHCIROOTHUBR3 RootHub; /** Pointer to the device instance - R3 ptr. */ PPDMDEVINSR3 pDevInsR3; /** Number of in-flight TDs. */ unsigned cInFlight; unsigned Alignment0; /**< Align aInFlight on a 8 byte boundary. */ /** Array of in-flight TDs. */ struct ohci_td_in_flight { /** Address of the transport descriptor. */ uint32_t GCPhysTD; /** Flag indicating an inactive (not-linked) URB. */ bool fInactive; /** Pointer to the URB. */ R3PTRTYPE(PVUSBURB) pUrb; } aInFlight[257]; #if HC_ARCH_BITS == 32 uint32_t Alignment1; #endif /** Number of in-done-queue TDs. */ unsigned cInDoneQueue; /** Array of in-done-queue TDs. */ struct ohci_td_in_done_queue { /** Address of the transport descriptor. */ uint32_t GCPhysTD; } aInDoneQueue[64]; /** When the tail of the done queue was added. * Used to calculate the age of the done queue. */ uint32_t u32FmDoneQueueTail; #if R3_ARCH_BITS == 32 /** Align pLoad, the stats and the struct size correctly. */ uint32_t Alignment2; #endif #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE /** Last read physical page for caching ED reads in the framer thread. */ OHCIPAGECACHE CacheED; /** Last read physical page for caching TD reads in the framer thread. */ OHCIPAGECACHE CacheTD; #endif /** Critical section to synchronize the framer and URB completion handler. */ RTCRITSECT CritSect; /** The restored periodic frame rate. */ uint32_t uRestoredPeriodicFrameRate; } OHCIR3; /** Pointer to ring-3 OHCI state. */ typedef OHCIR3 *POHCIR3; /** * OHCI device data, ring-0. */ typedef struct OHCIR0 { uint32_t uUnused; } OHCIR0; /** Pointer to ring-0 OHCI state. */ typedef OHCIR0 *POHCIR0; /** * OHCI device data, raw-mode. */ typedef struct OHCIRC { uint32_t uUnused; } OHCIRC; /** Pointer to raw-mode OHCI state. */ typedef OHCIRC *POHCIRC; /** @typedef OHCICC * The instance data for the current context. */ typedef CTX_SUFF(OHCI) OHCICC; /** @typedef POHCICC * Pointer to the instance data for the current context. */ typedef CTX_SUFF(POHCI) POHCICC; /** Standard OHCI bus speed */ #define OHCI_DEFAULT_TIMER_FREQ 1000 /** Host Controller Communications Area * @{ */ #define OHCI_HCCA_NUM_INTR 32 #define OHCI_HCCA_OFS (OHCI_HCCA_NUM_INTR * sizeof(uint32_t)) typedef struct OCHIHCCA { uint16_t frame; uint16_t pad; uint32_t done; } OCHIHCCA; AssertCompileSize(OCHIHCCA, 8); /** @} */ /** @name OHCI Endpoint Descriptor * @{ */ #define ED_PTR_MASK (~(uint32_t)0xf) #define ED_HWINFO_MPS 0x07ff0000 #define ED_HWINFO_ISO RT_BIT(15) #define ED_HWINFO_SKIP RT_BIT(14) #define ED_HWINFO_LOWSPEED RT_BIT(13) #define ED_HWINFO_IN RT_BIT(12) #define ED_HWINFO_OUT RT_BIT(11) #define ED_HWINFO_DIR (RT_BIT(11) | RT_BIT(12)) #define ED_HWINFO_ENDPOINT 0x780 /* 4 bits */ #define ED_HWINFO_ENDPOINT_SHIFT 7 #define ED_HWINFO_FUNCTION 0x7f /* 7 bits */ #define ED_HEAD_CARRY RT_BIT(1) #define ED_HEAD_HALTED RT_BIT(0) /** * OHCI Endpoint Descriptor. */ typedef struct OHCIED { /** Flags and stuff. */ uint32_t hwinfo; /** TailP - TD Queue Tail pointer. Bits 0-3 ignored / preserved. */ uint32_t TailP; /** HeadP - TD Queue head pointer. Bit 0 - Halted, Bit 1 - toggleCarry. Bit 2&3 - 0. */ uint32_t HeadP; /** NextED - Next Endpoint Descriptor. Bits 0-3 ignored / preserved. */ uint32_t NextED; } OHCIED, *POHCIED; typedef const OHCIED *PCOHCIED; /** @} */ AssertCompileSize(OHCIED, 16); /** @name Completion Codes * @{ */ #define OHCI_CC_NO_ERROR (UINT32_C(0x00) << 28) #define OHCI_CC_CRC (UINT32_C(0x01) << 28) #define OHCI_CC_STALL (UINT32_C(0x04) << 28) #define OHCI_CC_DEVICE_NOT_RESPONDING (UINT32_C(0x05) << 28) #define OHCI_CC_DNR OHCI_CC_DEVICE_NOT_RESPONDING #define OHCI_CC_PID_CHECK_FAILURE (UINT32_C(0x06) << 28) #define OHCI_CC_UNEXPECTED_PID (UINT32_C(0x07) << 28) #define OHCI_CC_DATA_OVERRUN (UINT32_C(0x08) << 28) #define OHCI_CC_DATA_UNDERRUN (UINT32_C(0x09) << 28) /* 0x0a..0x0b - reserved */ #define OHCI_CC_BUFFER_OVERRUN (UINT32_C(0x0c) << 28) #define OHCI_CC_BUFFER_UNDERRUN (UINT32_C(0x0d) << 28) #define OHCI_CC_NOT_ACCESSED_0 (UINT32_C(0x0e) << 28) #define OHCI_CC_NOT_ACCESSED_1 (UINT32_C(0x0f) << 28) /** @} */ /** @name OHCI General transfer descriptor * @{ */ /** Error count (EC) shift. */ #define TD_ERRORS_SHIFT 26 /** Error count max. (One greater than what the EC field can hold.) */ #define TD_ERRORS_MAX 4 /** CC - Condition code mask. */ #define TD_HWINFO_CC (UINT32_C(0xf0000000)) #define TD_HWINFO_CC_SHIFT 28 /** EC - Error count. */ #define TD_HWINFO_ERRORS (RT_BIT(26) | RT_BIT(27)) /** T - Data toggle. */ #define TD_HWINFO_TOGGLE (RT_BIT(24) | RT_BIT(25)) #define TD_HWINFO_TOGGLE_HI (RT_BIT(25)) #define TD_HWINFO_TOGGLE_LO (RT_BIT(24)) /** DI - Delay interrupt. */ #define TD_HWINFO_DI (RT_BIT(21) | RT_BIT(22) | RT_BIT(23)) #define TD_HWINFO_IN (RT_BIT(20)) #define TD_HWINFO_OUT (RT_BIT(19)) /** DP - Direction / PID. */ #define TD_HWINFO_DIR (RT_BIT(19) | RT_BIT(20)) /** R - Buffer rounding. */ #define TD_HWINFO_ROUNDING (RT_BIT(18)) /** Bits that are reserved / unknown. */ #define TD_HWINFO_UNKNOWN_MASK (UINT32_C(0x0003ffff)) /** SETUP - to endpoint. */ #define OHCI_TD_DIR_SETUP 0x0 /** OUT - to endpoint. */ #define OHCI_TD_DIR_OUT 0x1 /** IN - from endpoint. */ #define OHCI_TD_DIR_IN 0x2 /** Reserved. */ #define OHCI_TD_DIR_RESERVED 0x3 /** * OHCI general transfer descriptor */ typedef struct OHCITD { uint32_t hwinfo; /** CBP - Current Buffer Pointer. (32-bit physical address) */ uint32_t cbp; /** NextTD - Link to the next transfer descriptor. (32-bit physical address, dword aligned) */ uint32_t NextTD; /** BE - Buffer End (inclusive). (32-bit physical address) */ uint32_t be; } OHCITD, *POHCITD; typedef const OHCITD *PCOHCITD; /** @} */ AssertCompileSize(OHCIED, 16); /** @name OHCI isochronous transfer descriptor. * @{ */ /** SF - Start frame number. */ #define ITD_HWINFO_SF 0xffff /** DI - Delay interrupt. (TD_HWINFO_DI) */ #define ITD_HWINFO_DI (RT_BIT(21) | RT_BIT(22) | RT_BIT(23)) #define ITD_HWINFO_DI_SHIFT 21 /** FC - Frame count. */ #define ITD_HWINFO_FC (RT_BIT(24) | RT_BIT(25) | RT_BIT(26)) #define ITD_HWINFO_FC_SHIFT 24 /** CC - Condition code mask. (=TD_HWINFO_CC) */ #define ITD_HWINFO_CC UINT32_C(0xf0000000) #define ITD_HWINFO_CC_SHIFT 28 /** The buffer page 0 mask (lower 12 bits are ignored). */ #define ITD_BP0_MASK UINT32_C(0xfffff000) #define ITD_NUM_PSW 8 /** OFFSET - offset of the package into the buffer page. * (Only valid when CC set to Not Accessed.) * * Note that the top bit of the OFFSET field is overlapping with the * first bit in the CC field. This is ok because both 0xf and 0xe are * defined as "Not Accessed". */ #define ITD_PSW_OFFSET 0x1fff /** SIZE field mask for IN bound transfers. * (Only valid when CC isn't Not Accessed.)*/ #define ITD_PSW_SIZE 0x07ff /** CC field mask. * USed to indicate the format of SIZE (Not Accessed -> OFFSET). */ #define ITD_PSW_CC 0xf000 #define ITD_PSW_CC_SHIFT 12 /** * OHCI isochronous transfer descriptor. */ typedef struct OHCIITD { uint32_t HwInfo; /** BP0 - Buffer Page 0. The lower 12 bits are ignored. */ uint32_t BP0; /** NextTD - Link to the next transfer descriptor. (32-bit physical address, dword aligned) */ uint32_t NextTD; /** BE - Buffer End (inclusive). (32-bit physical address) */ uint32_t BE; /** (OffsetN/)PSWN - package status word array (0..7). * The format varies depending on whether the package has been completed or not. */ uint16_t aPSW[ITD_NUM_PSW]; } OHCIITD, *POHCIITD; typedef const OHCIITD *PCOHCIITD; /** @} */ AssertCompileSize(OHCIITD, 32); /** * OHCI register operator. */ typedef struct OHCIOPREG { const char *pszName; VBOXSTRICTRC (*pfnRead )(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value); VBOXSTRICTRC (*pfnWrite)(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t u32Value); } OHCIOPREG; /* OHCI Local stuff */ #define OHCI_CTL_CBSR ((1<<0)|(1<<1)) /* Control/Bulk Service Ratio. */ #define OHCI_CTL_PLE (1<<2) /* Periodic List Enable. */ #define OHCI_CTL_IE (1<<3) /* Isochronous Enable. */ #define OHCI_CTL_CLE (1<<4) /* Control List Enable. */ #define OHCI_CTL_BLE (1<<5) /* Bulk List Enable. */ #define OHCI_CTL_HCFS ((1<<6)|(1<<7)) /* Host Controller Functional State. */ #define OHCI_USB_RESET 0x00 #define OHCI_USB_RESUME 0x40 #define OHCI_USB_OPERATIONAL 0x80 #define OHCI_USB_SUSPEND 0xc0 #define OHCI_CTL_IR (1<<8) /* Interrupt Routing (host/SMI). */ #define OHCI_CTL_RWC (1<<9) /* Remote Wakeup Connected. */ #define OHCI_CTL_RWE (1<<10) /* Remote Wakeup Enabled. */ #define OHCI_STATUS_HCR (1<<0) /* Host Controller Reset. */ #define OHCI_STATUS_CLF (1<<1) /* Control List Filled. */ #define OHCI_STATUS_BLF (1<<2) /* Bulk List Filled. */ #define OHCI_STATUS_OCR (1<<3) /* Ownership Change Request. */ #define OHCI_STATUS_SOC ((1<<6)|(1<<7)) /* Scheduling Overrun Count. */ /** @name Interrupt Status and Enabled/Disabled Flags * @{ */ /** SO - Scheduling overrun. */ #define OHCI_INTR_SCHEDULING_OVERRUN RT_BIT(0) /** WDH - HcDoneHead writeback. */ #define OHCI_INTR_WRITE_DONE_HEAD RT_BIT(1) /** SF - Start of frame. */ #define OHCI_INTR_START_OF_FRAME RT_BIT(2) /** RD - Resume detect. */ #define OHCI_INTR_RESUME_DETECT RT_BIT(3) /** UE - Unrecoverable error. */ #define OHCI_INTR_UNRECOVERABLE_ERROR RT_BIT(4) /** FNO - Frame number overflow. */ #define OHCI_INTR_FRAMENUMBER_OVERFLOW RT_BIT(5) /** RHSC- Root hub status change. */ #define OHCI_INTR_ROOT_HUB_STATUS_CHANGE RT_BIT(6) /** OC - Ownership change. */ #define OHCI_INTR_OWNERSHIP_CHANGE RT_BIT(30) /** MIE - Master interrupt enable. */ #define OHCI_INTR_MASTER_INTERRUPT_ENABLED RT_BIT(31) /** @} */ #define OHCI_HCCA_SIZE 0x100 #define OHCI_HCCA_MASK UINT32_C(0xffffff00) #define OHCI_FMI_FI UINT32_C(0x00003fff) /* Frame Interval. */ #define OHCI_FMI_FSMPS UINT32_C(0x7fff0000) /* Full-Speed Max Packet Size. */ #define OHCI_FMI_FSMPS_SHIFT 16 #define OHCI_FMI_FIT UINT32_C(0x80000000) /* Frame Interval Toggle. */ #define OHCI_FMI_FIT_SHIFT 31 #define OHCI_FR_FRT RT_BIT_32(31) /* Frame Remaining Toggle */ #define OHCI_LS_THRESH 0x628 /* Low-Speed Threshold. */ #define OHCI_RHA_NDP (0xff) /* Number of Downstream Ports. */ #define OHCI_RHA_PSM RT_BIT_32(8) /* Power Switching Mode. */ #define OHCI_RHA_NPS RT_BIT_32(9) /* No Power Switching. */ #define OHCI_RHA_DT RT_BIT_32(10) /* Device Type. */ #define OHCI_RHA_OCPM RT_BIT_32(11) /* Over-Current Protection Mode. */ #define OHCI_RHA_NOCP RT_BIT_32(12) /* No Over-Current Protection. */ #define OHCI_RHA_POTPGP UINT32_C(0xff000000) /* Power On To Power Good Time. */ #define OHCI_RHS_LPS RT_BIT_32(0) /* Local Power Status. */ #define OHCI_RHS_OCI RT_BIT_32(1) /* Over-Current Indicator. */ #define OHCI_RHS_DRWE RT_BIT_32(15) /* Device Remote Wakeup Enable. */ #define OHCI_RHS_LPSC RT_BIT_32(16) /* Local Power Status Change. */ #define OHCI_RHS_OCIC RT_BIT_32(17) /* Over-Current Indicator Change. */ #define OHCI_RHS_CRWE RT_BIT_32(31) /* Clear Remote Wakeup Enable. */ /** @name HcRhPortStatus[n] - RH Port Status register (read). * @{ */ /** CCS - CurrentConnectionStatus - 0 = no device, 1 = device. */ #define OHCI_PORT_CCS RT_BIT(0) /** ClearPortEnable (when writing CCS). */ #define OHCI_PORT_CLRPE OHCI_PORT_CCS /** PES - PortEnableStatus. */ #define OHCI_PORT_PES RT_BIT(1) /** PSS - PortSuspendStatus */ #define OHCI_PORT_PSS RT_BIT(2) /** POCI- PortOverCurrentIndicator. */ #define OHCI_PORT_POCI RT_BIT(3) /** ClearSuspendStatus (when writing POCI). */ #define OHCI_PORT_CLRSS OHCI_PORT_POCI /** PRS - PortResetStatus */ #define OHCI_PORT_PRS RT_BIT(4) /** PPS - PortPowerStatus */ #define OHCI_PORT_PPS RT_BIT(8) /** LSDA - LowSpeedDeviceAttached */ #define OHCI_PORT_LSDA RT_BIT(9) /** ClearPortPower (when writing LSDA). */ #define OHCI_PORT_CLRPP OHCI_PORT_LSDA /** CSC - ConnectStatusChange */ #define OHCI_PORT_CSC RT_BIT(16) /** PESC - PortEnableStatusChange */ #define OHCI_PORT_PESC RT_BIT(17) /** PSSC - PortSuspendStatusChange */ #define OHCI_PORT_PSSC RT_BIT(18) /** OCIC - OverCurrentIndicatorChange */ #define OHCI_PORT_OCIC RT_BIT(19) /** PRSC - PortResetStatusChange */ #define OHCI_PORT_PRSC RT_BIT(20) /** The mask of RW1C bits. */ #define OHCI_PORT_CLEAR_CHANGE_MASK (OHCI_PORT_CSC | OHCI_PORT_PESC | OHCI_PORT_PSSC | OHCI_PORT_OCIC | OHCI_PORT_PRSC) /** @} */ #ifndef VBOX_DEVICE_STRUCT_TESTCASE #ifdef VBOX_WITH_OHCI_PHYS_READ_STATS /* * Explain */ typedef struct OHCIDESCREADSTATS { uint32_t cReads; uint32_t cPageChange; uint32_t cMinReadsPerPage; uint32_t cMaxReadsPerPage; uint32_t cReadsLastPage; uint32_t u32LastPageAddr; } OHCIDESCREADSTATS; typedef OHCIDESCREADSTATS *POHCIDESCREADSTATS; typedef struct OHCIPHYSREADSTATS { OHCIDESCREADSTATS ed; OHCIDESCREADSTATS td; OHCIDESCREADSTATS all; uint32_t cCrossReads; uint32_t cCacheReads; uint32_t cPageReads; } OHCIPHYSREADSTATS; typedef OHCIPHYSREADSTATS *POHCIPHYSREADSTATS; typedef OHCIPHYSREADSTATS const *PCOHCIPHYSREADSTATS; #endif /* VBOX_WITH_OHCI_PHYS_READ_STATS */ /********************************************************************************************************************************* * Global Variables * *********************************************************************************************************************************/ #if defined(VBOX_WITH_OHCI_PHYS_READ_STATS) && defined(IN_RING3) static OHCIPHYSREADSTATS g_PhysReadState; #endif #if defined(LOG_ENABLED) && defined(IN_RING3) static bool g_fLogBulkEPs = false; static bool g_fLogControlEPs = false; static bool g_fLogInterruptEPs = false; #endif #ifdef IN_RING3 /** * SSM descriptor table for the OHCI structure. */ static SSMFIELD const g_aOhciFields[] = { SSMFIELD_ENTRY( OHCI, SofTime), SSMFIELD_ENTRY_CUSTOM( dpic+fno, RT_OFFSETOF(OHCI, SofTime) + RT_SIZEOFMEMB(OHCI, SofTime), 4), SSMFIELD_ENTRY( OHCI, RootHub.status), SSMFIELD_ENTRY( OHCI, RootHub.desc_a), SSMFIELD_ENTRY( OHCI, RootHub.desc_b), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[0].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[1].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[2].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[3].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[4].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[5].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[6].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[7].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[8].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[9].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[10].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[11].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[12].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[13].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[14].fReg), SSMFIELD_ENTRY( OHCI, ctl), SSMFIELD_ENTRY( OHCI, status), SSMFIELD_ENTRY( OHCI, intr_status), SSMFIELD_ENTRY( OHCI, intr), SSMFIELD_ENTRY( OHCI, hcca), SSMFIELD_ENTRY( OHCI, per_cur), SSMFIELD_ENTRY( OHCI, ctrl_cur), SSMFIELD_ENTRY( OHCI, ctrl_head), SSMFIELD_ENTRY( OHCI, bulk_cur), SSMFIELD_ENTRY( OHCI, bulk_head), SSMFIELD_ENTRY( OHCI, done), SSMFIELD_ENTRY_CUSTOM( fsmps+fit+fi+frt, RT_OFFSETOF(OHCI, done) + RT_SIZEOFMEMB(OHCI, done), 4), SSMFIELD_ENTRY( OHCI, HcFmNumber), SSMFIELD_ENTRY( OHCI, pstart), SSMFIELD_ENTRY_TERM() }; /** * SSM descriptor table for the older 8-port OHCI structure. */ static SSMFIELD const g_aOhciFields8Ports[] = { SSMFIELD_ENTRY( OHCI, SofTime), SSMFIELD_ENTRY_CUSTOM( dpic+fno, RT_OFFSETOF(OHCI, SofTime) + RT_SIZEOFMEMB(OHCI, SofTime), 4), SSMFIELD_ENTRY( OHCI, RootHub.status), SSMFIELD_ENTRY( OHCI, RootHub.desc_a), SSMFIELD_ENTRY( OHCI, RootHub.desc_b), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[0].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[1].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[2].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[3].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[4].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[5].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[6].fReg), SSMFIELD_ENTRY( OHCI, RootHub.aPorts[7].fReg), SSMFIELD_ENTRY( OHCI, ctl), SSMFIELD_ENTRY( OHCI, status), SSMFIELD_ENTRY( OHCI, intr_status), SSMFIELD_ENTRY( OHCI, intr), SSMFIELD_ENTRY( OHCI, hcca), SSMFIELD_ENTRY( OHCI, per_cur), SSMFIELD_ENTRY( OHCI, ctrl_cur), SSMFIELD_ENTRY( OHCI, ctrl_head), SSMFIELD_ENTRY( OHCI, bulk_cur), SSMFIELD_ENTRY( OHCI, bulk_head), SSMFIELD_ENTRY( OHCI, done), SSMFIELD_ENTRY_CUSTOM( fsmps+fit+fi+frt, RT_OFFSETOF(OHCI, done) + RT_SIZEOFMEMB(OHCI, done), 4), SSMFIELD_ENTRY( OHCI, HcFmNumber), SSMFIELD_ENTRY( OHCI, pstart), SSMFIELD_ENTRY_TERM() }; #endif /********************************************************************************************************************************* * Internal Functions * *********************************************************************************************************************************/ RT_C_DECLS_BEGIN #ifdef IN_RING3 /* Update host controller state to reflect a device attach */ static void ohciR3RhPortPower(POHCIROOTHUBR3 pRh, unsigned iPort, bool fPowerUp); static void ohciR3BusResume(PPDMDEVINS pDevIns, POHCI pOhci, POHCICC pThisCC, bool fHardware); static void ohciR3BusStop(POHCICC pThisCC); #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE static void ohciR3PhysReadCacheInvalidate(POHCIPAGECACHE pPageCache); #endif static DECLCALLBACK(void) ohciR3RhXferCompletion(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb); static DECLCALLBACK(bool) ohciR3RhXferError(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb); static int ohciR3InFlightFind(POHCICC pThisCC, uint32_t GCPhysTD); # if defined(VBOX_STRICT) || defined(LOG_ENABLED) static int ohciR3InDoneQueueFind(POHCICC pThisCC, uint32_t GCPhysTD); # endif #endif /* IN_RING3 */ RT_C_DECLS_END /** * Update PCI IRQ levels */ static void ohciUpdateInterruptLocked(PPDMDEVINS pDevIns, POHCI ohci, const char *msg) { int level = 0; if ( (ohci->intr & OHCI_INTR_MASTER_INTERRUPT_ENABLED) && (ohci->intr_status & ohci->intr) && !(ohci->ctl & OHCI_CTL_IR)) level = 1; PDMDevHlpPCISetIrq(pDevIns, 0, level); if (level) { uint32_t val = ohci->intr_status & ohci->intr; Log2(("ohci: Fired off interrupt %#010x - SO=%d WDH=%d SF=%d RD=%d UE=%d FNO=%d RHSC=%d OC=%d - %s\n", val, val & 1, (val >> 1) & 1, (val >> 2) & 1, (val >> 3) & 1, (val >> 4) & 1, (val >> 5) & 1, (val >> 6) & 1, (val >> 30) & 1, msg)); NOREF(val); NOREF(msg); } } #ifdef IN_RING3 /** * Set an interrupt, use the wrapper ohciSetInterrupt. */ DECLINLINE(int) ohciR3SetInterruptInt(PPDMDEVINS pDevIns, POHCI ohci, int rcBusy, uint32_t intr, const char *msg) { int rc = PDMDevHlpCritSectEnter(pDevIns, &ohci->CsIrq, rcBusy); if (rc != VINF_SUCCESS) return rc; if ( (ohci->intr_status & intr) != intr ) { ohci->intr_status |= intr; ohciUpdateInterruptLocked(pDevIns, ohci, msg); } PDMDevHlpCritSectLeave(pDevIns, &ohci->CsIrq); return rc; } /** * Set an interrupt wrapper macro for logging purposes. */ # define ohciR3SetInterrupt(a_pDevIns, a_pOhci, a_fIntr) \ ohciR3SetInterruptInt(a_pDevIns, a_pOhci, VERR_IGNORED, a_fIntr, #a_fIntr) /** * Sets the HC in the unrecoverable error state and raises the appropriate interrupt. * * @param pDevIns The device instance. * @param pThis The OHCI instance. * @param iCode Diagnostic code. */ DECLINLINE(void) ohciR3RaiseUnrecoverableError(PPDMDEVINS pDevIns, POHCI pThis, int iCode) { LogRelMax(10, ("OHCI#%d: Raising unrecoverable error (%d)\n", pDevIns->iInstance, iCode)); ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_UNRECOVERABLE_ERROR); } /* Carry out a hardware remote wakeup */ static void ohciR3RemoteWakeup(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { if ((pThis->ctl & OHCI_CTL_HCFS) != OHCI_USB_SUSPEND) return; if (!(pThis->RootHub.status & OHCI_RHS_DRWE)) return; ohciR3BusResume(pDevIns, pThis, pThisCC, true /* hardware */); } /** * Query interface method for the roothub LUN. */ static DECLCALLBACK(void *) ohciR3RhQueryInterface(PPDMIBASE pInterface, const char *pszIID) { POHCICC pThisCC = RT_FROM_MEMBER(pInterface, OHCICC, RootHub.IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThisCC->RootHub.IBase); PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIROOTHUBPORT, &pThisCC->RootHub.IRhPort); PDMIBASE_RETURN_INTERFACE(pszIID, PDMILEDPORTS, &pThisCC->RootHub.ILeds); return NULL; } /** * Gets the pointer to the status LED of a unit. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. * @param ppLed Where to store the LED pointer. */ static DECLCALLBACK(int) ohciR3RhQueryStatusLed(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed) { POHCICC pThisCC = RT_FROM_MEMBER(pInterface, OHCICC, RootHub.ILeds); if (iLUN == 0) { *ppLed = &pThisCC->RootHub.Led; return VINF_SUCCESS; } return VERR_PDM_LUN_NOT_FOUND; } /** Converts a OHCI.roothub.IRhPort pointer to a OHCICC one. */ #define VUSBIROOTHUBPORT_2_OHCI(a_pInterface) RT_FROM_MEMBER(a_pInterface, OHCICC, RootHub.IRhPort) /** * Get the number of available ports in the hub. * * @returns The number of ports available. * @param pInterface Pointer to this structure. * @param pAvailable Bitmap indicating the available ports. Set bit == available port. */ static DECLCALLBACK(unsigned) ohciR3RhGetAvailablePorts(PVUSBIROOTHUBPORT pInterface, PVUSBPORTBITMAP pAvailable) { POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); unsigned cPorts = 0; memset(pAvailable, 0, sizeof(*pAvailable)); int const rcLock = PDMDevHlpCritSectEnter(pDevIns, pDevIns->pCritSectRoR3, VERR_IGNORED); PDM_CRITSECT_RELEASE_ASSERT_RC_DEV(pDevIns, pDevIns->pCritSectRoR3, rcLock); for (unsigned iPort = 0; iPort < OHCI_NDP_CFG(pThis); iPort++) if (!pThis->RootHub.aPorts[iPort].fAttached) { cPorts++; ASMBitSet(pAvailable, iPort + 1); } PDMDevHlpCritSectLeave(pDevIns, pDevIns->pCritSectRoR3); return cPorts; } /** * Gets the supported USB versions. * * @returns The mask of supported USB versions. * @param pInterface Pointer to this structure. */ static DECLCALLBACK(uint32_t) ohciR3RhGetUSBVersions(PVUSBIROOTHUBPORT pInterface) { RT_NOREF(pInterface); return VUSB_STDVER_11; } /** @interface_method_impl{VUSBIROOTHUBPORT,pfnAttach} */ static DECLCALLBACK(int) ohciR3RhAttach(PVUSBIROOTHUBPORT pInterface, uint32_t uPort, VUSBSPEED enmSpeed) { POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); LogFlow(("ohciR3RhAttach: uPort=%u\n", uPort)); int const rcLock = PDMDevHlpCritSectEnter(pDevIns, pDevIns->pCritSectRoR3, VERR_IGNORED); PDM_CRITSECT_RELEASE_ASSERT_RC_DEV(pDevIns, pDevIns->pCritSectRoR3, rcLock); /* * Validate and adjust input. */ Assert(uPort >= 1 && uPort <= OHCI_NDP_CFG(pThis)); uPort--; Assert(!pThis->RootHub.aPorts[uPort].fAttached); /* Only LS/FS devices should end up here. */ Assert(enmSpeed == VUSB_SPEED_LOW || enmSpeed == VUSB_SPEED_FULL); /* * Attach it. */ pThis->RootHub.aPorts[uPort].fReg = OHCI_PORT_CCS | OHCI_PORT_CSC; if (enmSpeed == VUSB_SPEED_LOW) pThis->RootHub.aPorts[uPort].fReg |= OHCI_PORT_LSDA; pThis->RootHub.aPorts[uPort].fAttached = true; ohciR3RhPortPower(&pThisCC->RootHub, uPort, 1 /* power on */); ohciR3RemoteWakeup(pDevIns, pThis, pThisCC); ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_ROOT_HUB_STATUS_CHANGE); PDMDevHlpCritSectLeave(pDevIns, pDevIns->pCritSectRoR3); return VINF_SUCCESS; } /** * A device is being detached from a port in the roothub. * * @param pInterface Pointer to this structure. * @param uPort The port number assigned to the device. */ static DECLCALLBACK(void) ohciR3RhDetach(PVUSBIROOTHUBPORT pInterface, uint32_t uPort) { POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); LogFlow(("ohciR3RhDetach: uPort=%u\n", uPort)); int const rcLock = PDMDevHlpCritSectEnter(pDevIns, pDevIns->pCritSectRoR3, VERR_IGNORED); PDM_CRITSECT_RELEASE_ASSERT_RC_DEV(pDevIns, pDevIns->pCritSectRoR3, rcLock); /* * Validate and adjust input. */ Assert(uPort >= 1 && uPort <= OHCI_NDP_CFG(pThis)); uPort--; Assert(pThis->RootHub.aPorts[uPort].fAttached); /* * Detach it. */ pThis->RootHub.aPorts[uPort].fAttached = false; if (pThis->RootHub.aPorts[uPort].fReg & OHCI_PORT_PES) pThis->RootHub.aPorts[uPort].fReg = OHCI_PORT_CSC | OHCI_PORT_PESC; else pThis->RootHub.aPorts[uPort].fReg = OHCI_PORT_CSC; ohciR3RemoteWakeup(pDevIns, pThis, pThisCC); ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_ROOT_HUB_STATUS_CHANGE); PDMDevHlpCritSectLeave(pDevIns, pDevIns->pCritSectRoR3); } /** * One of the roothub devices has completed its reset operation. * * Currently, we don't think anything is required to be done here * so it's just a stub for forcing async resetting of the devices * during a root hub reset. * * @param pDev The root hub device. * @param uPort The port of the device completing the reset. * @param rc The result of the operation. * @param pvUser Pointer to the controller. */ static DECLCALLBACK(void) ohciR3RhResetDoneOneDev(PVUSBIDEVICE pDev, uint32_t uPort, int rc, void *pvUser) { LogRel(("OHCI: root hub reset completed with %Rrc\n", rc)); RT_NOREF(pDev, uPort, rc, pvUser); } /** * Reset the root hub. * * @returns VBox status code. * @param pInterface Pointer to this structure. * @param fResetOnLinux This is used to indicate whether we're at VM reset time and * can do real resets or if we're at any other time where that * isn't such a good idea. * @remark Do NOT call VUSBIDevReset on the root hub in an async fashion! * @thread EMT */ static DECLCALLBACK(int) ohciR3RhReset(PVUSBIROOTHUBPORT pInterface, bool fResetOnLinux) { POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); int const rcLock = PDMDevHlpCritSectEnter(pDevIns, pDevIns->pCritSectRoR3, VERR_IGNORED); PDM_CRITSECT_RELEASE_ASSERT_RC_DEV(pDevIns, pDevIns->pCritSectRoR3, rcLock); Log(("ohci: root hub reset%s\n", fResetOnLinux ? " (reset on linux)" : "")); pThis->RootHub.status = 0; pThis->RootHub.desc_a = OHCI_RHA_NPS | OHCI_NDP_CFG(pThis); /* Preserve NDP value. */ pThis->RootHub.desc_b = 0x0; /* Impl. specific */ /* * We're pending to _reattach_ the device without resetting them. * Except, during VM reset where we use the opportunity to do a proper * reset before the guest comes along and expect things. * * However, it's very very likely that we're not doing the right thing * here if coming from the guest (USB Reset state). The docs talks about * root hub resetting, however what exact behaviour in terms of root hub * status and changed bits, and HC interrupts aren't stated clearly. IF we * get trouble and see the guest doing "USB Resets" we will have to look * into this. For the time being we stick with simple. */ for (unsigned iPort = 0; iPort < OHCI_NDP_CFG(pThis); iPort++) { if (pThis->RootHub.aPorts[iPort].fAttached) { pThis->RootHub.aPorts[iPort].fReg = OHCI_PORT_CCS | OHCI_PORT_CSC | OHCI_PORT_PPS; if (fResetOnLinux) { PVM pVM = PDMDevHlpGetVM(pDevIns); VUSBIRhDevReset(pThisCC->RootHub.pIRhConn, OHCI_PORT_2_VUSB_PORT(iPort), fResetOnLinux, ohciR3RhResetDoneOneDev, pThis, pVM); } } else pThis->RootHub.aPorts[iPort].fReg = 0; } ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_ROOT_HUB_STATUS_CHANGE); PDMDevHlpCritSectLeave(pDevIns, pDevIns->pCritSectRoR3); return VINF_SUCCESS; } /** * Does a software or hardware reset of the controller. * * This is called in response to setting HcCommandStatus.HCR, hardware reset, * and device construction. * * @param pDevIns The device instance. * @param pThis The ohci instance data. * @param pThisCC The ohci instance data, current context. * @param fNewMode The new mode of operation. This is UsbSuspend if it's a * software reset, and UsbReset if it's a hardware reset / cold boot. * @param fResetOnLinux Set if we can do a real reset of the devices attached to the root hub. * This is really a just a hack for the non-working linux device reset. * Linux has this feature called 'logical disconnect' if device reset fails * which prevents us from doing resets when the guest asks for it - the guest * will get confused when the device seems to be reconnected everytime it tries * to reset it. But if we're at hardware reset time, we can allow a device to * be 'reconnected' without upsetting the guest. * * @remark This hasn't got anything to do with software setting the mode to UsbReset. */ static void ohciR3DoReset(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, uint32_t fNewMode, bool fResetOnLinux) { Log(("ohci: %s reset%s\n", fNewMode == OHCI_USB_RESET ? "hardware" : "software", fResetOnLinux ? " (reset on linux)" : "")); /* Clear list enable bits first, so that any processing currently in progress terminates quickly. */ pThis->ctl &= ~(OHCI_CTL_BLE | OHCI_CTL_CLE | OHCI_CTL_PLE); /* Stop the bus in any case, disabling walking the lists. */ ohciR3BusStop(pThisCC); /* * Cancel all outstanding URBs. * * We can't, and won't, deal with URBs until we're moved out of the * suspend/reset state. Also, a real HC isn't going to send anything * any more when a reset has been signaled. */ pThisCC->RootHub.pIRhConn->pfnCancelAllUrbs(pThisCC->RootHub.pIRhConn); Assert(pThisCC->cInFlight == 0); /* * Reset the hardware registers. */ if (fNewMode == OHCI_USB_RESET) pThis->ctl = OHCI_CTL_RWC; /* We're the firmware, set RemoteWakeupConnected. */ else pThis->ctl &= OHCI_CTL_IR | OHCI_CTL_RWC; /* IR and RWC are preserved on software reset. */ /* Clear the HCFS bits first to make setting the new state work. */ pThis->ctl &= ~OHCI_CTL_HCFS; pThis->ctl |= fNewMode; pThis->status = 0; pThis->intr_status = 0; pThis->intr = 0; PDMDevHlpPCISetIrq(pDevIns, 0, 0); pThis->hcca = 0; pThis->per_cur = 0; pThis->ctrl_head = pThis->ctrl_cur = 0; pThis->bulk_head = pThis->bulk_cur = 0; pThis->done = 0; pThis->fsmps = 0x2778; /* To-Be-Defined, use the value linux sets...*/ pThis->fit = 0; pThis->fi = 11999; /* (12MHz ticks, one frame is 1ms) */ pThis->frt = 0; pThis->HcFmNumber = 0; pThis->pstart = 0; pThis->dqic = 0x7; pThis->fno = 0; #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE ohciR3PhysReadCacheInvalidate(&pThisCC->CacheED); ohciR3PhysReadCacheInvalidate(&pThisCC->CacheTD); #endif /* * If this is a hardware reset, we will initialize the root hub too. * Software resets doesn't do this according to the specs. * (It's not possible to have device connected at the time of the * device construction, so nothing to worry about there.) */ if (fNewMode == OHCI_USB_RESET) pThisCC->RootHub.pIRhConn->pfnReset(pThisCC->RootHub.pIRhConn, fResetOnLinux); } /** * Reads physical memory. */ DECLINLINE(void) ohciR3PhysRead(PPDMDEVINS pDevIns, uint32_t Addr, void *pvBuf, size_t cbBuf) { if (cbBuf) PDMDevHlpPCIPhysReadUser(pDevIns, Addr, pvBuf, cbBuf); } /** * Reads physical memory - metadata. */ DECLINLINE(void) ohciR3PhysReadMeta(PPDMDEVINS pDevIns, uint32_t Addr, void *pvBuf, size_t cbBuf) { if (cbBuf) PDMDevHlpPCIPhysReadMeta(pDevIns, Addr, pvBuf, cbBuf); } /** * Writes physical memory. */ DECLINLINE(void) ohciR3PhysWrite(PPDMDEVINS pDevIns, uint32_t Addr, const void *pvBuf, size_t cbBuf) { if (cbBuf) PDMDevHlpPCIPhysWriteUser(pDevIns, Addr, pvBuf, cbBuf); } /** * Writes physical memory - metadata. */ DECLINLINE(void) ohciR3PhysWriteMeta(PPDMDEVINS pDevIns, uint32_t Addr, const void *pvBuf, size_t cbBuf) { if (cbBuf) PDMDevHlpPCIPhysWriteMeta(pDevIns, Addr, pvBuf, cbBuf); } /** * Read an array of dwords from physical memory and correct endianness. */ DECLINLINE(void) ohciR3GetDWords(PPDMDEVINS pDevIns, uint32_t Addr, uint32_t *pau32s, int c32s) { ohciR3PhysReadMeta(pDevIns, Addr, pau32s, c32s * sizeof(uint32_t)); # ifndef RT_LITTLE_ENDIAN for(int i = 0; i < c32s; i++) pau32s[i] = RT_H2LE_U32(pau32s[i]); # endif } /** * Write an array of dwords from physical memory and correct endianness. */ DECLINLINE(void) ohciR3PutDWords(PPDMDEVINS pDevIns, uint32_t Addr, const uint32_t *pau32s, int cu32s) { # ifdef RT_LITTLE_ENDIAN ohciR3PhysWriteMeta(pDevIns, Addr, pau32s, cu32s << 2); # else for (int i = 0; i < c32s; i++, pau32s++, Addr += sizeof(*pau32s)) { uint32_t u32Tmp = RT_H2LE_U32(*pau32s); ohciR3PhysWriteMeta(pDevIns, Addr, (uint8_t *)&u32Tmp, sizeof(u32Tmp)); } # endif } # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS static void descReadStatsReset(POHCIDESCREADSTATS p) { p->cReads = 0; p->cPageChange = 0; p->cMinReadsPerPage = UINT32_MAX; p->cMaxReadsPerPage = 0; p->cReadsLastPage = 0; p->u32LastPageAddr = 0; } static void physReadStatsReset(POHCIPHYSREADSTATS p) { descReadStatsReset(&p->ed); descReadStatsReset(&p->td); descReadStatsReset(&p->all); p->cCrossReads = 0; p->cCacheReads = 0; p->cPageReads = 0; } static void physReadStatsUpdateDesc(POHCIDESCREADSTATS p, uint32_t u32Addr) { const uint32_t u32PageAddr = u32Addr & ~UINT32_C(0xFFF); ++p->cReads; if (p->u32LastPageAddr == 0) { /* First call. */ ++p->cReadsLastPage; p->u32LastPageAddr = u32PageAddr; } else if (u32PageAddr != p->u32LastPageAddr) { /* New page. */ ++p->cPageChange; p->cMinReadsPerPage = RT_MIN(p->cMinReadsPerPage, p->cReadsLastPage); p->cMaxReadsPerPage = RT_MAX(p->cMaxReadsPerPage, p->cReadsLastPage);; p->cReadsLastPage = 1; p->u32LastPageAddr = u32PageAddr; } else { /* Read on the same page. */ ++p->cReadsLastPage; } } static void physReadStatsPrint(POHCIPHYSREADSTATS p) { p->ed.cMinReadsPerPage = RT_MIN(p->ed.cMinReadsPerPage, p->ed.cReadsLastPage); p->ed.cMaxReadsPerPage = RT_MAX(p->ed.cMaxReadsPerPage, p->ed.cReadsLastPage);; p->td.cMinReadsPerPage = RT_MIN(p->td.cMinReadsPerPage, p->td.cReadsLastPage); p->td.cMaxReadsPerPage = RT_MAX(p->td.cMaxReadsPerPage, p->td.cReadsLastPage);; p->all.cMinReadsPerPage = RT_MIN(p->all.cMinReadsPerPage, p->all.cReadsLastPage); p->all.cMaxReadsPerPage = RT_MAX(p->all.cMaxReadsPerPage, p->all.cReadsLastPage);; LogRel(("PHYSREAD:\n" " ED: %d, %d, %d/%d\n" " TD: %d, %d, %d/%d\n" " ALL: %d, %d, %d/%d\n" " C: %d, %d, %d\n" "", p->ed.cReads, p->ed.cPageChange, p->ed.cMinReadsPerPage, p->ed.cMaxReadsPerPage, p->td.cReads, p->td.cPageChange, p->td.cMinReadsPerPage, p->td.cMaxReadsPerPage, p->all.cReads, p->all.cPageChange, p->all.cMinReadsPerPage, p->all.cMaxReadsPerPage, p->cCrossReads, p->cCacheReads, p->cPageReads )); physReadStatsReset(p); } # endif /* VBOX_WITH_OHCI_PHYS_READ_STATS */ # ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE static void ohciR3PhysReadCacheInvalidate(POHCIPAGECACHE pPageCache) { pPageCache->GCPhysReadCacheAddr = NIL_RTGCPHYS; } static void ohciR3PhysReadCacheRead(PPDMDEVINS pDevIns, POHCIPAGECACHE pPageCache, RTGCPHYS GCPhys, void *pvBuf, size_t cbBuf) { const RTGCPHYS PageAddr = GCPhys & ~(RTGCPHYS)GUEST_PAGE_OFFSET_MASK; if (PageAddr == ((GCPhys + cbBuf) & ~(RTGCPHYS)GUEST_PAGE_OFFSET_MASK)) { if (PageAddr != pPageCache->GCPhysReadCacheAddr) { PDMDevHlpPCIPhysRead(pDevIns, PageAddr, pPageCache->abPhysReadCache, sizeof(pPageCache->abPhysReadCache)); pPageCache->GCPhysReadCacheAddr = PageAddr; # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS ++g_PhysReadState.cPageReads; # endif } memcpy(pvBuf, &pPageCache->abPhysReadCache[GCPhys & GUEST_PAGE_OFFSET_MASK], cbBuf); # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS ++g_PhysReadState.cCacheReads; # endif } else { PDMDevHlpPCIPhysRead(pDevIns, GCPhys, pvBuf, cbBuf); # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS ++g_PhysReadState.cCrossReads; # endif } } /** * Updates the data in the given page cache if the given guest physical address is currently contained * in the cache. * * @param pPageCache The page cache to update. * @param GCPhys The guest physical address needing the update. * @param pvBuf Pointer to the buffer to update the page cache with. * @param cbBuf Number of bytes to update. */ static void ohciR3PhysCacheUpdate(POHCIPAGECACHE pPageCache, RTGCPHYS GCPhys, const void *pvBuf, size_t cbBuf) { const RTGCPHYS GCPhysPage = GCPhys & ~(RTGCPHYS)GUEST_PAGE_OFFSET_MASK; if (GCPhysPage == pPageCache->GCPhysReadCacheAddr) { uint32_t offPage = GCPhys & GUEST_PAGE_OFFSET_MASK; memcpy(&pPageCache->abPhysReadCache[offPage], pvBuf, RT_MIN(GUEST_PAGE_SIZE - offPage, cbBuf)); } } /** * Update any cached ED data with the given endpoint descriptor at the given address. * * @param pThisCC The OHCI instance data for the current context. * @param EdAddr Endpoint descriptor address. * @param pEd The endpoint descriptor which got updated. */ DECLINLINE(void) ohciR3CacheEdUpdate(POHCICC pThisCC, RTGCPHYS32 EdAddr, PCOHCIED pEd) { ohciR3PhysCacheUpdate(&pThisCC->CacheED, EdAddr + RT_OFFSETOF(OHCIED, HeadP), &pEd->HeadP, sizeof(uint32_t)); } /** * Update any cached TD data with the given transfer descriptor at the given address. * * @param pThisCC The OHCI instance data, current context. * @param TdAddr Transfer descriptor address. * @param pTd The transfer descriptor which got updated. */ DECLINLINE(void) ohciR3CacheTdUpdate(POHCICC pThisCC, RTGCPHYS32 TdAddr, PCOHCITD pTd) { ohciR3PhysCacheUpdate(&pThisCC->CacheTD, TdAddr, pTd, sizeof(*pTd)); } # endif /* VBOX_WITH_OHCI_PHYS_READ_CACHE */ /** * Reads an OHCIED. */ DECLINLINE(void) ohciR3ReadEd(PPDMDEVINS pDevIns, uint32_t EdAddr, POHCIED pEd) { # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS physReadStatsUpdateDesc(&g_PhysReadState.ed, EdAddr); physReadStatsUpdateDesc(&g_PhysReadState.all, EdAddr); # endif #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); ohciR3PhysReadCacheRead(pDevIns, &pThisCC->CacheED, EdAddr, pEd, sizeof(*pEd)); #else ohciR3GetDWords(pDevIns, EdAddr, (uint32_t *)pEd, sizeof(*pEd) >> 2); #endif } /** * Reads an OHCITD. */ DECLINLINE(void) ohciR3ReadTd(PPDMDEVINS pDevIns, uint32_t TdAddr, POHCITD pTd) { # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS physReadStatsUpdateDesc(&g_PhysReadState.td, TdAddr); physReadStatsUpdateDesc(&g_PhysReadState.all, TdAddr); # endif #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); ohciR3PhysReadCacheRead(pDevIns, &pThisCC->CacheTD, TdAddr, pTd, sizeof(*pTd)); #else ohciR3GetDWords(pDevIns, TdAddr, (uint32_t *)pTd, sizeof(*pTd) >> 2); #endif # ifdef LOG_ENABLED if (LogIs3Enabled()) { uint32_t hichg; hichg = pTd->hwinfo; Log3(("ohciR3ReadTd(,%#010x,): R=%d DP=%d DI=%d T=%d EC=%d CC=%#x CBP=%#010x NextTD=%#010x BE=%#010x UNK=%#x\n", TdAddr, (pTd->hwinfo >> 18) & 1, (pTd->hwinfo >> 19) & 3, (pTd->hwinfo >> 21) & 7, (pTd->hwinfo >> 24) & 3, (pTd->hwinfo >> 26) & 3, (pTd->hwinfo >> 28) &15, pTd->cbp, pTd->NextTD, pTd->be, pTd->hwinfo & TD_HWINFO_UNKNOWN_MASK)); # if 0 if (LogIs3Enabled()) { /* * usbohci.sys (32-bit XP) allocates 0x80 bytes per TD: * 0x00-0x0f is the OHCI TD. * 0x10-0x1f for isochronous TDs * 0x20 is the physical address of this TD. * 0x24 is initialized with 0x64745948, probably a magic. * 0x28 is some kind of flags. the first bit begin the allocated / not allocated indicator. * 0x30 is a pointer to something. endpoint? interface? device? * 0x38 is initialized to 0xdeadface. but is changed into a pointer or something. * 0x40 looks like a pointer. * The rest is unknown and initialized with zeros. */ uint8_t abXpTd[0x80]; ohciR3PhysRead(pDevIns, TdAddr, abXpTd, sizeof(abXpTd)); Log3(("WinXpTd: alloc=%d PhysSelf=%RX32 s2=%RX32 magic=%RX32 s4=%RX32 s5=%RX32\n" "%.*Rhxd\n", abXpTd[28] & RT_BIT(0), *((uint32_t *)&abXpTd[0x20]), *((uint32_t *)&abXpTd[0x30]), *((uint32_t *)&abXpTd[0x24]), *((uint32_t *)&abXpTd[0x38]), *((uint32_t *)&abXpTd[0x40]), sizeof(abXpTd), &abXpTd[0])); } # endif } # endif } /** * Reads an OHCIITD. */ DECLINLINE(void) ohciR3ReadITd(PPDMDEVINS pDevIns, POHCI pThis, uint32_t ITdAddr, POHCIITD pITd) { ohciR3GetDWords(pDevIns, ITdAddr, (uint32_t *)pITd, sizeof(*pITd) / sizeof(uint32_t)); # ifdef LOG_ENABLED if (LogIs3Enabled()) { Log3(("ohciR3ReadITd(,%#010x,): SF=%#06x (%#RX32) DI=%#x FC=%d CC=%#x BP0=%#010x NextTD=%#010x BE=%#010x\n", ITdAddr, pITd->HwInfo & 0xffff, pThis->HcFmNumber, (pITd->HwInfo >> 21) & 7, (pITd->HwInfo >> 24) & 7, (pITd->HwInfo >> 28) &15, pITd->BP0, pITd->NextTD, pITd->BE)); Log3(("psw0=%x:%03x psw1=%x:%03x psw2=%x:%03x psw3=%x:%03x psw4=%x:%03x psw5=%x:%03x psw6=%x:%03x psw7=%x:%03x\n", pITd->aPSW[0] >> 12, pITd->aPSW[0] & 0xfff, pITd->aPSW[1] >> 12, pITd->aPSW[1] & 0xfff, pITd->aPSW[2] >> 12, pITd->aPSW[2] & 0xfff, pITd->aPSW[3] >> 12, pITd->aPSW[3] & 0xfff, pITd->aPSW[4] >> 12, pITd->aPSW[4] & 0xfff, pITd->aPSW[5] >> 12, pITd->aPSW[5] & 0xfff, pITd->aPSW[6] >> 12, pITd->aPSW[6] & 0xfff, pITd->aPSW[7] >> 12, pITd->aPSW[7] & 0xfff)); } # else RT_NOREF(pThis); # endif } /** * Writes an OHCIED. */ DECLINLINE(void) ohciR3WriteEd(PPDMDEVINS pDevIns, uint32_t EdAddr, PCOHCIED pEd) { # ifdef LOG_ENABLED if (LogIs3Enabled()) { OHCIED EdOld; uint32_t hichg; ohciR3GetDWords(pDevIns, EdAddr, (uint32_t *)&EdOld, sizeof(EdOld) >> 2); hichg = EdOld.hwinfo ^ pEd->hwinfo; Log3(("ohciR3WriteEd(,%#010x,): %sFA=%#x %sEN=%#x %sD=%#x %sS=%d %sK=%d %sF=%d %sMPS=%#x %sTailP=%#010x %sHeadP=%#010x %sH=%d %sC=%d %sNextED=%#010x\n", EdAddr, (hichg >> 0) & 0x7f ? "*" : "", (pEd->hwinfo >> 0) & 0x7f, (hichg >> 7) & 0xf ? "*" : "", (pEd->hwinfo >> 7) & 0xf, (hichg >> 11) & 3 ? "*" : "", (pEd->hwinfo >> 11) & 3, (hichg >> 13) & 1 ? "*" : "", (pEd->hwinfo >> 13) & 1, (hichg >> 14) & 1 ? "*" : "", (pEd->hwinfo >> 14) & 1, (hichg >> 15) & 1 ? "*" : "", (pEd->hwinfo >> 15) & 1, (hichg >> 24) &0x3ff ? "*" : "", (pEd->hwinfo >> 16) &0x3ff, EdOld.TailP != pEd->TailP ? "*" : "", pEd->TailP, (EdOld.HeadP & ~3) != (pEd->HeadP & ~3) ? "*" : "", pEd->HeadP & ~3, (EdOld.HeadP ^ pEd->HeadP) & 1 ? "*" : "", pEd->HeadP & 1, (EdOld.HeadP ^ pEd->HeadP) & 2 ? "*" : "", (pEd->HeadP >> 1) & 1, EdOld.NextED != pEd->NextED ? "*" : "", pEd->NextED)); } # endif ohciR3PutDWords(pDevIns, EdAddr + RT_OFFSETOF(OHCIED, HeadP), &pEd->HeadP, 1); #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); ohciR3CacheEdUpdate(pThisCC, EdAddr, pEd); #endif } /** * Writes an OHCITD. */ DECLINLINE(void) ohciR3WriteTd(PPDMDEVINS pDevIns, uint32_t TdAddr, PCOHCITD pTd, const char *pszLogMsg) { # ifdef LOG_ENABLED if (LogIs3Enabled()) { OHCITD TdOld; ohciR3GetDWords(pDevIns, TdAddr, (uint32_t *)&TdOld, sizeof(TdOld) >> 2); uint32_t hichg = TdOld.hwinfo ^ pTd->hwinfo; Log3(("ohciR3WriteTd(,%#010x,): %sR=%d %sDP=%d %sDI=%#x %sT=%d %sEC=%d %sCC=%#x %sCBP=%#010x %sNextTD=%#010x %sBE=%#010x (%s)\n", TdAddr, (hichg >> 18) & 1 ? "*" : "", (pTd->hwinfo >> 18) & 1, (hichg >> 19) & 3 ? "*" : "", (pTd->hwinfo >> 19) & 3, (hichg >> 21) & 7 ? "*" : "", (pTd->hwinfo >> 21) & 7, (hichg >> 24) & 3 ? "*" : "", (pTd->hwinfo >> 24) & 3, (hichg >> 26) & 3 ? "*" : "", (pTd->hwinfo >> 26) & 3, (hichg >> 28) &15 ? "*" : "", (pTd->hwinfo >> 28) &15, TdOld.cbp != pTd->cbp ? "*" : "", pTd->cbp, TdOld.NextTD != pTd->NextTD ? "*" : "", pTd->NextTD, TdOld.be != pTd->be ? "*" : "", pTd->be, pszLogMsg)); } # else RT_NOREF(pszLogMsg); # endif ohciR3PutDWords(pDevIns, TdAddr, (uint32_t *)pTd, sizeof(*pTd) >> 2); #ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); ohciR3CacheTdUpdate(pThisCC, TdAddr, pTd); #endif } /** * Writes an OHCIITD. */ DECLINLINE(void) ohciR3WriteITd(PPDMDEVINS pDevIns, POHCI pThis, uint32_t ITdAddr, PCOHCIITD pITd, const char *pszLogMsg) { # ifdef LOG_ENABLED if (LogIs3Enabled()) { OHCIITD ITdOld; ohciR3GetDWords(pDevIns, ITdAddr, (uint32_t *)&ITdOld, sizeof(ITdOld) / sizeof(uint32_t)); uint32_t HIChg = ITdOld.HwInfo ^ pITd->HwInfo; Log3(("ohciR3WriteITd(,%#010x,): %sSF=%#x (now=%#RX32) %sDI=%#x %sFC=%d %sCC=%#x %sBP0=%#010x %sNextTD=%#010x %sBE=%#010x (%s)\n", ITdAddr, (HIChg & 0xffff) & 1 ? "*" : "", pITd->HwInfo & 0xffff, pThis->HcFmNumber, (HIChg >> 21) & 7 ? "*" : "", (pITd->HwInfo >> 21) & 7, (HIChg >> 24) & 7 ? "*" : "", (pITd->HwInfo >> 24) & 7, (HIChg >> 28) &15 ? "*" : "", (pITd->HwInfo >> 28) &15, ITdOld.BP0 != pITd->BP0 ? "*" : "", pITd->BP0, ITdOld.NextTD != pITd->NextTD ? "*" : "", pITd->NextTD, ITdOld.BE != pITd->BE ? "*" : "", pITd->BE, pszLogMsg)); Log3(("psw0=%s%x:%s%03x psw1=%s%x:%s%03x psw2=%s%x:%s%03x psw3=%s%x:%s%03x psw4=%s%x:%s%03x psw5=%s%x:%s%03x psw6=%s%x:%s%03x psw7=%s%x:%s%03x\n", (ITdOld.aPSW[0] >> 12) != (pITd->aPSW[0] >> 12) ? "*" : "", pITd->aPSW[0] >> 12, (ITdOld.aPSW[0] & 0xfff) != (pITd->aPSW[0] & 0xfff) ? "*" : "", pITd->aPSW[0] & 0xfff, (ITdOld.aPSW[1] >> 12) != (pITd->aPSW[1] >> 12) ? "*" : "", pITd->aPSW[1] >> 12, (ITdOld.aPSW[1] & 0xfff) != (pITd->aPSW[1] & 0xfff) ? "*" : "", pITd->aPSW[1] & 0xfff, (ITdOld.aPSW[2] >> 12) != (pITd->aPSW[2] >> 12) ? "*" : "", pITd->aPSW[2] >> 12, (ITdOld.aPSW[2] & 0xfff) != (pITd->aPSW[2] & 0xfff) ? "*" : "", pITd->aPSW[2] & 0xfff, (ITdOld.aPSW[3] >> 12) != (pITd->aPSW[3] >> 12) ? "*" : "", pITd->aPSW[3] >> 12, (ITdOld.aPSW[3] & 0xfff) != (pITd->aPSW[3] & 0xfff) ? "*" : "", pITd->aPSW[3] & 0xfff, (ITdOld.aPSW[4] >> 12) != (pITd->aPSW[4] >> 12) ? "*" : "", pITd->aPSW[4] >> 12, (ITdOld.aPSW[4] & 0xfff) != (pITd->aPSW[4] & 0xfff) ? "*" : "", pITd->aPSW[4] & 0xfff, (ITdOld.aPSW[5] >> 12) != (pITd->aPSW[5] >> 12) ? "*" : "", pITd->aPSW[5] >> 12, (ITdOld.aPSW[5] & 0xfff) != (pITd->aPSW[5] & 0xfff) ? "*" : "", pITd->aPSW[5] & 0xfff, (ITdOld.aPSW[6] >> 12) != (pITd->aPSW[6] >> 12) ? "*" : "", pITd->aPSW[6] >> 12, (ITdOld.aPSW[6] & 0xfff) != (pITd->aPSW[6] & 0xfff) ? "*" : "", pITd->aPSW[6] & 0xfff, (ITdOld.aPSW[7] >> 12) != (pITd->aPSW[7] >> 12) ? "*" : "", pITd->aPSW[7] >> 12, (ITdOld.aPSW[7] & 0xfff) != (pITd->aPSW[7] & 0xfff) ? "*" : "", pITd->aPSW[7] & 0xfff)); } # else RT_NOREF(pThis, pszLogMsg); # endif ohciR3PutDWords(pDevIns, ITdAddr, (uint32_t *)pITd, sizeof(*pITd) / sizeof(uint32_t)); } # ifdef LOG_ENABLED /** * Core TD queue dumper. LOG_ENABLED builds only. */ DECLINLINE(void) ohciR3DumpTdQueueCore(PPDMDEVINS pDevIns, POHCICC pThisCC, uint32_t GCPhysHead, uint32_t GCPhysTail, bool fFull) { uint32_t GCPhys = GCPhysHead; int cIterations = 128; for (;;) { OHCITD Td; Log4(("%#010x%s%s", GCPhys, GCPhys && ohciR3InFlightFind(pThisCC, GCPhys) >= 0 ? "~" : "", GCPhys && ohciR3InDoneQueueFind(pThisCC, GCPhys) >= 0 ? "^" : "")); if (GCPhys == 0 || GCPhys == GCPhysTail) break; /* can't use ohciR3ReadTd() because of Log4. */ ohciR3GetDWords(pDevIns, GCPhys, (uint32_t *)&Td, sizeof(Td) >> 2); if (fFull) Log4((" [R=%d DP=%d DI=%d T=%d EC=%d CC=%#x CBP=%#010x NextTD=%#010x BE=%#010x] -> ", (Td.hwinfo >> 18) & 1, (Td.hwinfo >> 19) & 3, (Td.hwinfo >> 21) & 7, (Td.hwinfo >> 24) & 3, (Td.hwinfo >> 26) & 3, (Td.hwinfo >> 28) &15, Td.cbp, Td.NextTD, Td.be)); else Log4((" -> ")); GCPhys = Td.NextTD & ED_PTR_MASK; Assert(GCPhys != GCPhysHead); if (!--cIterations) break; } } /** * Dumps a TD queue. LOG_ENABLED builds only. */ DECLINLINE(void) ohciR3DumpTdQueue(PPDMDEVINS pDevIns, POHCICC pThisCC, uint32_t GCPhysHead, const char *pszMsg) { if (pszMsg) Log4(("%s: ", pszMsg)); ohciR3DumpTdQueueCore(pDevIns, pThisCC, GCPhysHead, 0, true); Log4(("\n")); } /** * Core ITD queue dumper. LOG_ENABLED builds only. */ DECLINLINE(void) ohciR3DumpITdQueueCore(PPDMDEVINS pDevIns, POHCICC pThisCC, uint32_t GCPhysHead, uint32_t GCPhysTail, bool fFull) { RT_NOREF(fFull); uint32_t GCPhys = GCPhysHead; int cIterations = 100; for (;;) { OHCIITD ITd; Log4(("%#010x%s%s", GCPhys, GCPhys && ohciR3InFlightFind(pThisCC, GCPhys) >= 0 ? "~" : "", GCPhys && ohciR3InDoneQueueFind(pThisCC, GCPhys) >= 0 ? "^" : "")); if (GCPhys == 0 || GCPhys == GCPhysTail) break; /* can't use ohciR3ReadTd() because of Log4. */ ohciR3GetDWords(pDevIns, GCPhys, (uint32_t *)&ITd, sizeof(ITd) / sizeof(uint32_t)); /*if (fFull) Log4((" [R=%d DP=%d DI=%d T=%d EC=%d CC=%#x CBP=%#010x NextTD=%#010x BE=%#010x] -> ", (Td.hwinfo >> 18) & 1, (Td.hwinfo >> 19) & 3, (Td.hwinfo >> 21) & 7, (Td.hwinfo >> 24) & 3, (Td.hwinfo >> 26) & 3, (Td.hwinfo >> 28) &15, Td.cbp, Td.NextTD, Td.be)); else*/ Log4((" -> ")); GCPhys = ITd.NextTD & ED_PTR_MASK; Assert(GCPhys != GCPhysHead); if (!--cIterations) break; } } /** * Dumps a ED list. LOG_ENABLED builds only. */ DECLINLINE(void) ohciR3DumpEdList(PPDMDEVINS pDevIns, POHCICC pThisCC, uint32_t GCPhysHead, const char *pszMsg, bool fTDs) { RT_NOREF(fTDs); uint32_t GCPhys = GCPhysHead; if (pszMsg) Log4(("%s:", pszMsg)); for (;;) { OHCIED Ed; /* ED */ Log4((" %#010x={", GCPhys)); if (!GCPhys) { Log4(("END}\n")); return; } /* TDs */ ohciR3ReadEd(pDevIns, GCPhys, &Ed); if (Ed.hwinfo & ED_HWINFO_ISO) Log4(("[I]")); if ((Ed.HeadP & ED_HEAD_HALTED) || (Ed.hwinfo & ED_HWINFO_SKIP)) { if ((Ed.HeadP & ED_HEAD_HALTED) && (Ed.hwinfo & ED_HWINFO_SKIP)) Log4(("SH}")); else if (Ed.hwinfo & ED_HWINFO_SKIP) Log4(("S-}")); else Log4(("-H}")); } else { if (Ed.hwinfo & ED_HWINFO_ISO) ohciR3DumpITdQueueCore(pDevIns, pThisCC, Ed.HeadP & ED_PTR_MASK, Ed.TailP & ED_PTR_MASK, false); else ohciR3DumpTdQueueCore(pDevIns, pThisCC, Ed.HeadP & ED_PTR_MASK, Ed.TailP & ED_PTR_MASK, false); Log4(("}")); } /* next */ GCPhys = Ed.NextED & ED_PTR_MASK; Assert(GCPhys != GCPhysHead); } /* not reached */ } # endif /* LOG_ENABLED */ DECLINLINE(int) ohciR3InFlightFindFree(POHCICC pThisCC, const int iStart) { unsigned i = iStart; while (i < RT_ELEMENTS(pThisCC->aInFlight)) { if (pThisCC->aInFlight[i].pUrb == NULL) return i; i++; } i = iStart; while (i-- > 0) { if (pThisCC->aInFlight[i].pUrb == NULL) return i; } return -1; } /** * Record an in-flight TD. * * @param pThis OHCI instance data, shared edition. * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. * @param pUrb The URB. */ static void ohciR3InFlightAdd(POHCI pThis, POHCICC pThisCC, uint32_t GCPhysTD, PVUSBURB pUrb) { int i = ohciR3InFlightFindFree(pThisCC, (GCPhysTD >> 4) % RT_ELEMENTS(pThisCC->aInFlight)); if (i >= 0) { # ifdef LOG_ENABLED pUrb->pHci->u32FrameNo = pThis->HcFmNumber; # endif pThisCC->aInFlight[i].GCPhysTD = GCPhysTD; pThisCC->aInFlight[i].pUrb = pUrb; pThisCC->cInFlight++; return; } AssertMsgFailed(("Out of space cInFlight=%d!\n", pThisCC->cInFlight)); RT_NOREF(pThis); } /** * Record in-flight TDs for an URB. * * @param pThis OHCI instance data, shared edition. * @param pThisCC OHCI instance data, ring-3 edition. * @param pUrb The URB. */ static void ohciR3InFlightAddUrb(POHCI pThis, POHCICC pThisCC, PVUSBURB pUrb) { for (unsigned iTd = 0; iTd < pUrb->pHci->cTds; iTd++) ohciR3InFlightAdd(pThis, pThisCC, pUrb->paTds[iTd].TdAddr, pUrb); } /** * Finds a in-flight TD. * * @returns Index of the record. * @returns -1 if not found. * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. * @remark This has to be fast. */ static int ohciR3InFlightFind(POHCICC pThisCC, uint32_t GCPhysTD) { unsigned cLeft = pThisCC->cInFlight; unsigned i = (GCPhysTD >> 4) % RT_ELEMENTS(pThisCC->aInFlight); const int iLast = i; while (i < RT_ELEMENTS(pThisCC->aInFlight)) { if (pThisCC->aInFlight[i].GCPhysTD == GCPhysTD && pThisCC->aInFlight[i].pUrb) return i; if (pThisCC->aInFlight[i].pUrb) if (cLeft-- <= 1) return -1; i++; } i = iLast; while (i-- > 0) { if (pThisCC->aInFlight[i].GCPhysTD == GCPhysTD && pThisCC->aInFlight[i].pUrb) return i; if (pThisCC->aInFlight[i].pUrb) if (cLeft-- <= 1) return -1; } return -1; } /** * Checks if a TD is in-flight. * * @returns true if in flight, false if not. * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. */ static bool ohciR3IsTdInFlight(POHCICC pThisCC, uint32_t GCPhysTD) { return ohciR3InFlightFind(pThisCC, GCPhysTD) >= 0; } /** * Returns a URB associated with an in-flight TD, if any. * * @returns pointer to URB if TD is in flight. * @returns NULL if not in flight. * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. */ static PVUSBURB ohciR3TdInFlightUrb(POHCICC pThisCC, uint32_t GCPhysTD) { int i; i = ohciR3InFlightFind(pThisCC, GCPhysTD); if ( i >= 0 ) return pThisCC->aInFlight[i].pUrb; return NULL; } /** * Removes a in-flight TD. * * @returns 0 if found. For logged builds this is the number of frames the TD has been in-flight. * @returns -1 if not found. * @param pThis OHCI instance data, shared edition (for logging). * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. */ static int ohciR3InFlightRemove(POHCI pThis, POHCICC pThisCC, uint32_t GCPhysTD) { int i = ohciR3InFlightFind(pThisCC, GCPhysTD); if (i >= 0) { # ifdef LOG_ENABLED const int cFramesInFlight = pThis->HcFmNumber - pThisCC->aInFlight[i].pUrb->pHci->u32FrameNo; # else const int cFramesInFlight = 0; RT_NOREF(pThis); # endif Log2(("ohciR3InFlightRemove: reaping TD=%#010x %d frames (%#010x-%#010x)\n", GCPhysTD, cFramesInFlight, pThisCC->aInFlight[i].pUrb->pHci->u32FrameNo, pThis->HcFmNumber)); pThisCC->aInFlight[i].GCPhysTD = 0; pThisCC->aInFlight[i].pUrb = NULL; pThisCC->cInFlight--; return cFramesInFlight; } AssertMsgFailed(("TD %#010x is not in flight\n", GCPhysTD)); return -1; } /** * Clear any possible leftover traces of a URB from the in-flight tracking. * Useful if broken guests confuse the tracking logic by using the same TD * for multiple URBs. See @bugref{10410}. * * @param pThisCC OHCI instance data, ring-3 edition. * @param pUrb The URB. */ static void ohciR3InFlightClearUrb(POHCICC pThisCC, PVUSBURB pUrb) { unsigned i = 0; while (i < RT_ELEMENTS(pThisCC->aInFlight)) { if (pThisCC->aInFlight[i].pUrb == pUrb) { Log2(("ohciR3InFlightClearUrb: clearing leftover URB!!\n")); pThisCC->aInFlight[i].GCPhysTD = 0; pThisCC->aInFlight[i].pUrb = NULL; pThisCC->cInFlight--; } i++; } } /** * Removes all TDs associated with a URB from the in-flight tracking. * * @returns 0 if found. For logged builds this is the number of frames the TD has been in-flight. * @returns -1 if not found. * @param pThis OHCI instance data, shared edition (for logging). * @param pThisCC OHCI instance data, ring-3 edition. * @param pUrb The URB. */ static int ohciR3InFlightRemoveUrb(POHCI pThis, POHCICC pThisCC, PVUSBURB pUrb) { int cFramesInFlight = ohciR3InFlightRemove(pThis, pThisCC, pUrb->paTds[0].TdAddr); if (pUrb->pHci->cTds > 1) { for (unsigned iTd = 1; iTd < pUrb->pHci->cTds; iTd++) if (ohciR3InFlightRemove(pThis, pThisCC, pUrb->paTds[iTd].TdAddr) < 0) cFramesInFlight = -1; } ohciR3InFlightClearUrb(pThisCC, pUrb); return cFramesInFlight; } # if defined(VBOX_STRICT) || defined(LOG_ENABLED) /** * Empties the in-done-queue. * @param pThisCC OHCI instance data, ring-3 edition. */ static void ohciR3InDoneQueueZap(POHCICC pThisCC) { pThisCC->cInDoneQueue = 0; } /** * Finds a TD in the in-done-queue. * @returns >= 0 on success. * @returns -1 if not found. * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. */ static int ohciR3InDoneQueueFind(POHCICC pThisCC, uint32_t GCPhysTD) { unsigned i = pThisCC->cInDoneQueue; while (i-- > 0) if (pThisCC->aInDoneQueue[i].GCPhysTD == GCPhysTD) return i; return -1; } /** * Checks that the specified TD is not in the done queue. * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. */ static bool ohciR3InDoneQueueCheck(POHCICC pThisCC, uint32_t GCPhysTD) { int i = ohciR3InDoneQueueFind(pThisCC, GCPhysTD); # if 0 /* This condition has been observed with the USB tablet emulation or with * a real USB mouse and an SMP XP guest. I am also not sure if this is * really a problem for us. The assertion checks that the guest doesn't * re-submit a TD which is still in the done queue. It seems to me that * this should only be a problem if we either keep track of TDs in the done * queue somewhere else as well (in which case we should also free those * references in time, and I can't see any code doing that) or if we * manipulate TDs in the done queue in some way that might fail if they are * re-submitted (can't see anything like that either). */ AssertMsg(i < 0, ("TD %#010x (i=%d)\n", GCPhysTD, i)); # endif return i < 0; } # if defined(VBOX_STRICT) && defined(LOG_ENABLED) /** * Adds a TD to the in-done-queue tracking, checking that it's not there already. * @param pThisCC OHCI instance data, ring-3 edition. * @param GCPhysTD Physical address of the TD. */ static void ohciR3InDoneQueueAdd(POHCICC pThisCC, uint32_t GCPhysTD) { Assert(pThisCC->cInDoneQueue + 1 <= RT_ELEMENTS(pThisCC->aInDoneQueue)); if (ohciR3InDoneQueueCheck(pThisCC, GCPhysTD)) pThisCC->aInDoneQueue[pThisCC->cInDoneQueue++].GCPhysTD = GCPhysTD; } # endif /* VBOX_STRICT */ # endif /* defined(VBOX_STRICT) || defined(LOG_ENABLED) */ /** * OHCI Transport Buffer - represents a OHCI Transport Descriptor (TD). * A TD may be split over max 2 pages. */ typedef struct OHCIBUF { /** Pages involved. */ struct OHCIBUFVEC { /** The 32-bit physical address of this part. */ uint32_t Addr; /** The length. */ uint32_t cb; } aVecs[2]; /** Number of valid entries in aVecs. */ uint32_t cVecs; /** The total length. */ uint32_t cbTotal; } OHCIBUF, *POHCIBUF; /** * Sets up a OHCI transport buffer. * * @param pBuf OHCI buffer. * @param cbp Current buffer pointer. 32-bit physical address. * @param be Last byte in buffer (BufferEnd). 32-bit physical address. */ static void ohciR3BufInit(POHCIBUF pBuf, uint32_t cbp, uint32_t be) { if (!cbp || !be) { pBuf->cVecs = 0; pBuf->cbTotal = 0; Log2(("ohci: cbp=%#010x be=%#010x cbTotal=0 EMPTY\n", cbp, be)); } else if ((cbp & ~0xfff) == (be & ~0xfff) && (cbp <= be)) { pBuf->aVecs[0].Addr = cbp; pBuf->aVecs[0].cb = (be - cbp) + 1; pBuf->cVecs = 1; pBuf->cbTotal = pBuf->aVecs[0].cb; Log2(("ohci: cbp=%#010x be=%#010x cbTotal=%u\n", cbp, be, pBuf->cbTotal)); } else { pBuf->aVecs[0].Addr = cbp; pBuf->aVecs[0].cb = 0x1000 - (cbp & 0xfff); pBuf->aVecs[1].Addr = be & ~0xfff; pBuf->aVecs[1].cb = (be & 0xfff) + 1; pBuf->cVecs = 2; pBuf->cbTotal = pBuf->aVecs[0].cb + pBuf->aVecs[1].cb; Log2(("ohci: cbp=%#010x be=%#010x cbTotal=%u PAGE FLIP\n", cbp, be, pBuf->cbTotal)); } } /** * Updates a OHCI transport buffer. * * This is called upon completion to adjust the sector lengths if * the total length has changed. (received less then we had space for * or a partial transfer.) * * @param pBuf The buffer to update. cbTotal contains the new total on input. * While the aVecs[*].cb members is updated upon return. */ static void ohciR3BufUpdate(POHCIBUF pBuf) { for (uint32_t i = 0, cbCur = 0; i < pBuf->cVecs; i++) { if (cbCur + pBuf->aVecs[i].cb > pBuf->cbTotal) { pBuf->aVecs[i].cb = pBuf->cbTotal - cbCur; pBuf->cVecs = i + 1; return; } cbCur += pBuf->aVecs[i].cb; } } /** A worker for ohciR3UnlinkTds(). */ static bool ohciR3UnlinkIsochronousTdInList(PPDMDEVINS pDevIns, POHCI pThis, uint32_t TdAddr, POHCIITD pITd, POHCIED pEd) { const uint32_t LastTdAddr = pEd->TailP & ED_PTR_MASK; Log(("ohciUnlinkIsocTdInList: Unlinking non-head ITD! TdAddr=%#010RX32 HeadTdAddr=%#010RX32 LastEdAddr=%#010RX32\n", TdAddr, pEd->HeadP & ED_PTR_MASK, LastTdAddr)); AssertMsgReturn(LastTdAddr != TdAddr, ("TdAddr=%#010RX32\n", TdAddr), false); uint32_t cIterations = 256; uint32_t CurTdAddr = pEd->HeadP & ED_PTR_MASK; while ( CurTdAddr != LastTdAddr && cIterations-- > 0) { OHCIITD ITd; ohciR3ReadITd(pDevIns, pThis, CurTdAddr, &ITd); if ((ITd.NextTD & ED_PTR_MASK) == TdAddr) { ITd.NextTD = (pITd->NextTD & ED_PTR_MASK) | (ITd.NextTD & ~ED_PTR_MASK); ohciR3WriteITd(pDevIns, pThis, CurTdAddr, &ITd, "ohciUnlinkIsocTdInList"); pITd->NextTD &= ~ED_PTR_MASK; return true; } /* next */ CurTdAddr = ITd.NextTD & ED_PTR_MASK; } Log(("ohciUnlinkIsocTdInList: TdAddr=%#010RX32 wasn't found in the list!!! (cIterations=%d)\n", TdAddr, cIterations)); return false; } /** A worker for ohciR3UnlinkTds(). */ static bool ohciR3UnlinkGeneralTdInList(PPDMDEVINS pDevIns, uint32_t TdAddr, POHCITD pTd, POHCIED pEd) { const uint32_t LastTdAddr = pEd->TailP & ED_PTR_MASK; Log(("ohciR3UnlinkGeneralTdInList: Unlinking non-head TD! TdAddr=%#010RX32 HeadTdAddr=%#010RX32 LastEdAddr=%#010RX32\n", TdAddr, pEd->HeadP & ED_PTR_MASK, LastTdAddr)); AssertMsgReturn(LastTdAddr != TdAddr, ("TdAddr=%#010RX32\n", TdAddr), false); uint32_t cIterations = 256; uint32_t CurTdAddr = pEd->HeadP & ED_PTR_MASK; while ( CurTdAddr != LastTdAddr && cIterations-- > 0) { OHCITD Td; ohciR3ReadTd(pDevIns, CurTdAddr, &Td); if ((Td.NextTD & ED_PTR_MASK) == TdAddr) { Td.NextTD = (pTd->NextTD & ED_PTR_MASK) | (Td.NextTD & ~ED_PTR_MASK); ohciR3WriteTd(pDevIns, CurTdAddr, &Td, "ohciR3UnlinkGeneralTdInList"); pTd->NextTD &= ~ED_PTR_MASK; return true; } /* next */ CurTdAddr = Td.NextTD & ED_PTR_MASK; } Log(("ohciR3UnlinkGeneralTdInList: TdAddr=%#010RX32 wasn't found in the list!!! (cIterations=%d)\n", TdAddr, cIterations)); return false; } /** * Unlinks the TDs that makes up the URB from the ED. * * @returns success indicator. true if successfully unlinked. * @returns false if the TD was not found in the list. */ static bool ohciR3UnlinkTds(PPDMDEVINS pDevIns, POHCI pThis, PVUSBURB pUrb, POHCIED pEd) { /* * Don't unlink more than once. */ if (pUrb->pHci->fUnlinked) return true; pUrb->pHci->fUnlinked = true; if (pUrb->enmType == VUSBXFERTYPE_ISOC) { for (unsigned iTd = 0; iTd < pUrb->pHci->cTds; iTd++) { POHCIITD pITd = (POHCIITD)&pUrb->paTds[iTd].TdCopy[0]; const uint32_t ITdAddr = pUrb->paTds[iTd].TdAddr; /* * Unlink the TD from the ED list. * The normal case is that it's at the head of the list. */ Assert((ITdAddr & ED_PTR_MASK) == ITdAddr); if ((pEd->HeadP & ED_PTR_MASK) == ITdAddr) { pEd->HeadP = (pITd->NextTD & ED_PTR_MASK) | (pEd->HeadP & ~ED_PTR_MASK); pITd->NextTD &= ~ED_PTR_MASK; } else { /* * It's probably somewhere in the list, not a unlikely situation with * the current isochronous code. */ if (!ohciR3UnlinkIsochronousTdInList(pDevIns, pThis, ITdAddr, pITd, pEd)) return false; } } } else { for (unsigned iTd = 0; iTd < pUrb->pHci->cTds; iTd++) { POHCITD pTd = (POHCITD)&pUrb->paTds[iTd].TdCopy[0]; const uint32_t TdAddr = pUrb->paTds[iTd].TdAddr; /** @todo r=bird: Messing with the toggle flag in prepare is probably not correct * when we encounter a STALL error, 4.3.1.3.7.2: ''If an endpoint returns a STALL * PID, the Host Controller retires the General TD with the ConditionCode set * to STALL and halts the endpoint. The CurrentBufferPointer, ErrorCount, and * dataToggle fields retain the values that they had at the start of the * transaction.'' */ /* update toggle and set data toggle carry */ pTd->hwinfo &= ~TD_HWINFO_TOGGLE; if ( pTd->hwinfo & TD_HWINFO_TOGGLE_HI ) { if ( !!(pTd->hwinfo & TD_HWINFO_TOGGLE_LO) ) /** @todo r=bird: is it just me or doesn't this make sense at all? */ pTd->hwinfo |= TD_HWINFO_TOGGLE_LO; else pTd->hwinfo &= ~TD_HWINFO_TOGGLE_LO; } else { if ( !!(pEd->HeadP & ED_HEAD_CARRY) ) /** @todo r=bird: is it just me or doesn't this make sense at all? */ pEd->HeadP |= ED_HEAD_CARRY; else pEd->HeadP &= ~ED_HEAD_CARRY; } /* * Unlink the TD from the ED list. * The normal case is that it's at the head of the list. */ Assert((TdAddr & ED_PTR_MASK) == TdAddr); if ((pEd->HeadP & ED_PTR_MASK) == TdAddr) { pEd->HeadP = (pTd->NextTD & ED_PTR_MASK) | (pEd->HeadP & ~ED_PTR_MASK); pTd->NextTD &= ~ED_PTR_MASK; } else { /* * The TD is probably somewhere in the list. * * This shouldn't ever happen unless there was a failure! Even on failure, * we can screw up the HCD state by picking out a TD from within the list * like this! If this turns out to be a problem, we have to find a better * solution. For now we'll hope the HCD handles it... */ if (!ohciR3UnlinkGeneralTdInList(pDevIns, TdAddr, pTd, pEd)) return false; } /* * Only unlink the first TD on error. * See comment in ohciR3RhXferCompleteGeneralURB(). */ if (pUrb->enmStatus != VUSBSTATUS_OK) break; } } return true; } /** * Checks that the transport descriptors associated with the URB * hasn't been changed in any way indicating that they may have been canceled. * * This rountine also updates the TD copies contained within the URB. * * @returns true if the URB has been canceled, otherwise false. * @param pDevIns The device instance. * @param pThis The OHCI instance. * @param pUrb The URB in question. * @param pEd The ED pointer (optional). */ static bool ohciR3HasUrbBeenCanceled(PPDMDEVINS pDevIns, POHCI pThis, PVUSBURB pUrb, PCOHCIED pEd) { if (!pUrb) return true; /* * Make sure we've got an endpoint descriptor so we can * check for tail TDs. */ OHCIED Ed; if (!pEd) { ohciR3ReadEd(pDevIns, pUrb->pHci->EdAddr, &Ed); pEd = &Ed; } if (pUrb->enmType == VUSBXFERTYPE_ISOC) { for (unsigned iTd = 0; iTd < pUrb->pHci->cTds; iTd++) { union { OHCIITD ITd; uint32_t au32[8]; } u; if ( (pUrb->paTds[iTd].TdAddr & ED_PTR_MASK) == (pEd->TailP & ED_PTR_MASK)) { Log(("%s: ohciR3HasUrbBeenCanceled: iTd=%d cTds=%d TdAddr=%#010RX32 canceled (tail)! [iso]\n", pUrb->pszDesc, iTd, pUrb->pHci->cTds, pUrb->paTds[iTd].TdAddr)); STAM_COUNTER_INC(&pThis->StatCanceledIsocUrbs); return true; } ohciR3ReadITd(pDevIns, pThis, pUrb->paTds[iTd].TdAddr, &u.ITd); if ( u.au32[0] != pUrb->paTds[iTd].TdCopy[0] /* hwinfo */ || u.au32[1] != pUrb->paTds[iTd].TdCopy[1] /* bp0 */ || u.au32[3] != pUrb->paTds[iTd].TdCopy[3] /* be */ || ( u.au32[2] != pUrb->paTds[iTd].TdCopy[2] /* NextTD */ && iTd + 1 < pUrb->pHci->cTds /* ignore the last one */) || u.au32[4] != pUrb->paTds[iTd].TdCopy[4] /* psw0&1 */ || u.au32[5] != pUrb->paTds[iTd].TdCopy[5] /* psw2&3 */ || u.au32[6] != pUrb->paTds[iTd].TdCopy[6] /* psw4&5 */ || u.au32[7] != pUrb->paTds[iTd].TdCopy[7] /* psw6&7 */ ) { Log(("%s: ohciR3HasUrbBeenCanceled: iTd=%d cTds=%d TdAddr=%#010RX32 canceled! [iso]\n", pUrb->pszDesc, iTd, pUrb->pHci->cTds, pUrb->paTds[iTd].TdAddr)); Log2((" %.*Rhxs (cur)\n" "!= %.*Rhxs (copy)\n", sizeof(u.ITd), &u.ITd, sizeof(u.ITd), &pUrb->paTds[iTd].TdCopy[0])); STAM_COUNTER_INC(&pThis->StatCanceledIsocUrbs); return true; } pUrb->paTds[iTd].TdCopy[2] = u.au32[2]; } } else { for (unsigned iTd = 0; iTd < pUrb->pHci->cTds; iTd++) { union { OHCITD Td; uint32_t au32[4]; } u; if ( (pUrb->paTds[iTd].TdAddr & ED_PTR_MASK) == (pEd->TailP & ED_PTR_MASK)) { Log(("%s: ohciR3HasUrbBeenCanceled: iTd=%d cTds=%d TdAddr=%#010RX32 canceled (tail)!\n", pUrb->pszDesc, iTd, pUrb->pHci->cTds, pUrb->paTds[iTd].TdAddr)); STAM_COUNTER_INC(&pThis->StatCanceledGenUrbs); return true; } ohciR3ReadTd(pDevIns, pUrb->paTds[iTd].TdAddr, &u.Td); if ( u.au32[0] != pUrb->paTds[iTd].TdCopy[0] /* hwinfo */ || u.au32[1] != pUrb->paTds[iTd].TdCopy[1] /* cbp */ || u.au32[3] != pUrb->paTds[iTd].TdCopy[3] /* be */ || ( u.au32[2] != pUrb->paTds[iTd].TdCopy[2] /* NextTD */ && iTd + 1 < pUrb->pHci->cTds /* ignore the last one */) ) { Log(("%s: ohciR3HasUrbBeenCanceled: iTd=%d cTds=%d TdAddr=%#010RX32 canceled!\n", pUrb->pszDesc, iTd, pUrb->pHci->cTds, pUrb->paTds[iTd].TdAddr)); Log2((" %.*Rhxs (cur)\n" "!= %.*Rhxs (copy)\n", sizeof(u.Td), &u.Td, sizeof(u.Td), &pUrb->paTds[iTd].TdCopy[0])); STAM_COUNTER_INC(&pThis->StatCanceledGenUrbs); return true; } pUrb->paTds[iTd].TdCopy[2] = u.au32[2]; } } return false; } /** * Returns the OHCI_CC_* corresponding to the VUSB status code. * * @returns OHCI_CC_* value. * @param enmStatus The VUSB status code. */ static uint32_t ohciR3VUsbStatus2OhciStatus(VUSBSTATUS enmStatus) { switch (enmStatus) { case VUSBSTATUS_OK: return OHCI_CC_NO_ERROR; case VUSBSTATUS_STALL: return OHCI_CC_STALL; case VUSBSTATUS_CRC: return OHCI_CC_CRC; case VUSBSTATUS_DATA_UNDERRUN: return OHCI_CC_DATA_UNDERRUN; case VUSBSTATUS_DATA_OVERRUN: return OHCI_CC_DATA_OVERRUN; case VUSBSTATUS_DNR: return OHCI_CC_DNR; case VUSBSTATUS_NOT_ACCESSED: return OHCI_CC_NOT_ACCESSED_1; default: Log(("pUrb->enmStatus=%#x!!!\n", enmStatus)); return OHCI_CC_DNR; } } /** * Lock the given OHCI controller instance. * * @param pThisCC The OHCI controller instance to lock, ring-3 edition. */ DECLINLINE(void) ohciR3Lock(POHCICC pThisCC) { RTCritSectEnter(&pThisCC->CritSect); # ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE /* Clear all caches here to avoid reading stale data from previous lock holders. */ ohciR3PhysReadCacheInvalidate(&pThisCC->CacheED); ohciR3PhysReadCacheInvalidate(&pThisCC->CacheTD); # endif } /** * Unlocks the given OHCI controller instance. * * @param pThisCC The OHCI controller instance to unlock, ring-3 edition. */ DECLINLINE(void) ohciR3Unlock(POHCICC pThisCC) { # ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE /* * Clear all caches here to avoid leaving stale data behind (paranoia^2, * already done in ohciR3Lock). */ ohciR3PhysReadCacheInvalidate(&pThisCC->CacheED); ohciR3PhysReadCacheInvalidate(&pThisCC->CacheTD); # endif RTCritSectLeave(&pThisCC->CritSect); } /** * Worker for ohciR3RhXferCompletion that handles the completion of * a URB made up of isochronous TDs. * * In general, all URBs should have status OK. */ static void ohciR3RhXferCompleteIsochronousURB(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, PVUSBURB pUrb /*, POHCIED pEd , int cFmAge*/) { /* * Copy the data back (if IN operation) and update the TDs. */ for (unsigned iTd = 0; iTd < pUrb->pHci->cTds; iTd++) { POHCIITD pITd = (POHCIITD)&pUrb->paTds[iTd].TdCopy[0]; const uint32_t ITdAddr = pUrb->paTds[iTd].TdAddr; const unsigned cFrames = ((pITd->HwInfo & ITD_HWINFO_FC) >> ITD_HWINFO_FC_SHIFT) + 1; unsigned R = (pUrb->pHci->u32FrameNo & ITD_HWINFO_SF) - (pITd->HwInfo & ITD_HWINFO_SF); if (R >= 8) R = 0; /* submitted ahead of time. */ /* * Only one case of TD level condition code is document, so * just set NO_ERROR here to reduce number duplicate code. */ pITd->HwInfo &= ~TD_HWINFO_CC; AssertCompile(OHCI_CC_NO_ERROR == 0); if (pUrb->enmStatus == VUSBSTATUS_OK) { /* * Update the frames and copy back the data. * We assume that we don't get incorrect lengths here. */ for (unsigned i = 0; i < cFrames; i++) { if ( i < R || pUrb->aIsocPkts[i - R].enmStatus == VUSBSTATUS_NOT_ACCESSED) { /* It should already be NotAccessed. */ pITd->aPSW[i] |= 0xe000; /* (Don't touch the 12th bit.) */ continue; } /* Update the PSW (save the offset first in case of a IN). */ uint32_t off = pITd->aPSW[i] & ITD_PSW_OFFSET; pITd->aPSW[i] = ohciR3VUsbStatus2OhciStatus(pUrb->aIsocPkts[i - R].enmStatus) >> (TD_HWINFO_CC_SHIFT - ITD_PSW_CC_SHIFT); if ( pUrb->enmDir == VUSBDIRECTION_IN && ( pUrb->aIsocPkts[i - R].enmStatus == VUSBSTATUS_OK || pUrb->aIsocPkts[i - R].enmStatus == VUSBSTATUS_DATA_UNDERRUN || pUrb->aIsocPkts[i - R].enmStatus == VUSBSTATUS_DATA_OVERRUN)) { /* Set the size. */ const unsigned cb = pUrb->aIsocPkts[i - R].cb; pITd->aPSW[i] |= cb & ITD_PSW_SIZE; /* Copy data. */ if (cb) { uint8_t *pb = &pUrb->abData[pUrb->aIsocPkts[i - R].off]; if (off + cb > 0x1000) { if (off < 0x1000) { /* both */ const unsigned cb0 = 0x1000 - off; ohciR3PhysWrite(pDevIns, (pITd->BP0 & ITD_BP0_MASK) + off, pb, cb0); ohciR3PhysWrite(pDevIns, pITd->BE & ITD_BP0_MASK, pb + cb0, cb - cb0); } else /* only in the 2nd page */ ohciR3PhysWrite(pDevIns, (pITd->BE & ITD_BP0_MASK) + (off & ITD_BP0_MASK), pb, cb); } else /* only in the 1st page */ ohciR3PhysWrite(pDevIns, (pITd->BP0 & ITD_BP0_MASK) + off, pb, cb); Log5(("packet %d: off=%#x cb=%#x pb=%p (%#x)\n" "%.*Rhxd\n", i + R, off, cb, pb, pb - &pUrb->abData[0], cb, pb)); //off += cb; } } } /* * If the last package ended with a NotAccessed status, set ITD CC * to DataOverrun to indicate scheduling overrun. */ if (pUrb->aIsocPkts[pUrb->cIsocPkts - 1].enmStatus == VUSBSTATUS_NOT_ACCESSED) pITd->HwInfo |= OHCI_CC_DATA_OVERRUN; } else { Log(("DevOHCI: Taking untested code path at line %d...\n", __LINE__)); /* * Most status codes only applies to the individual packets. * * If we get a URB level error code of this kind, we'll distribute * it to all the packages unless some other status is available for * a package. This is a bit fuzzy, and we will get rid of this code * before long! */ //if (pUrb->enmStatus != VUSBSTATUS_DATA_OVERRUN) { const unsigned uCC = ohciR3VUsbStatus2OhciStatus(pUrb->enmStatus) >> (TD_HWINFO_CC_SHIFT - ITD_PSW_CC_SHIFT); for (unsigned i = 0; i < cFrames; i++) pITd->aPSW[i] = uCC; } //else // pITd->HwInfo |= ohciR3VUsbStatus2OhciStatus(pUrb->enmStatus); } /* * Update the done queue interrupt timer. */ uint32_t DoneInt = (pITd->HwInfo & ITD_HWINFO_DI) >> ITD_HWINFO_DI_SHIFT; if ((pITd->HwInfo & TD_HWINFO_CC) != OHCI_CC_NO_ERROR) DoneInt = 0; /* It's cleared on error. */ if ( DoneInt != 0x7 && DoneInt < pThis->dqic) pThis->dqic = DoneInt; /* * Move on to the done list and write back the modified TD. */ # ifdef LOG_ENABLED if (!pThis->done) pThisCC->u32FmDoneQueueTail = pThis->HcFmNumber; # ifdef VBOX_STRICT ohciR3InDoneQueueAdd(pThisCC, ITdAddr); # endif # endif pITd->NextTD = pThis->done; pThis->done = ITdAddr; Log(("%s: ohciR3RhXferCompleteIsochronousURB: ITdAddr=%#010x EdAddr=%#010x SF=%#x (%#x) CC=%#x FC=%d " "psw0=%x:%x psw1=%x:%x psw2=%x:%x psw3=%x:%x psw4=%x:%x psw5=%x:%x psw6=%x:%x psw7=%x:%x R=%d\n", pUrb->pszDesc, ITdAddr, pUrb->pHci->EdAddr, pITd->HwInfo & ITD_HWINFO_SF, pThis->HcFmNumber, (pITd->HwInfo & ITD_HWINFO_CC) >> ITD_HWINFO_CC_SHIFT, (pITd->HwInfo & ITD_HWINFO_FC) >> ITD_HWINFO_FC_SHIFT, pITd->aPSW[0] >> ITD_PSW_CC_SHIFT, pITd->aPSW[0] & ITD_PSW_SIZE, pITd->aPSW[1] >> ITD_PSW_CC_SHIFT, pITd->aPSW[1] & ITD_PSW_SIZE, pITd->aPSW[2] >> ITD_PSW_CC_SHIFT, pITd->aPSW[2] & ITD_PSW_SIZE, pITd->aPSW[3] >> ITD_PSW_CC_SHIFT, pITd->aPSW[3] & ITD_PSW_SIZE, pITd->aPSW[4] >> ITD_PSW_CC_SHIFT, pITd->aPSW[4] & ITD_PSW_SIZE, pITd->aPSW[5] >> ITD_PSW_CC_SHIFT, pITd->aPSW[5] & ITD_PSW_SIZE, pITd->aPSW[6] >> ITD_PSW_CC_SHIFT, pITd->aPSW[6] & ITD_PSW_SIZE, pITd->aPSW[7] >> ITD_PSW_CC_SHIFT, pITd->aPSW[7] & ITD_PSW_SIZE, R)); ohciR3WriteITd(pDevIns, pThis, ITdAddr, pITd, "retired"); } RT_NOREF(pThisCC); } /** * Worker for ohciR3RhXferCompletion that handles the completion of * a URB made up of general TDs. */ static void ohciR3RhXferCompleteGeneralURB(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, PVUSBURB pUrb, POHCIED pEd, int cFmAge) { RT_NOREF(cFmAge); /* * Copy the data back (if IN operation) and update the TDs. */ unsigned cbLeft = pUrb->cbData; uint8_t *pb = &pUrb->abData[0]; for (unsigned iTd = 0; iTd < pUrb->pHci->cTds; iTd++) { POHCITD pTd = (POHCITD)&pUrb->paTds[iTd].TdCopy[0]; const uint32_t TdAddr = pUrb->paTds[iTd].TdAddr; /* * Setup a ohci transfer buffer and calc the new cbp value. */ OHCIBUF Buf; ohciR3BufInit(&Buf, pTd->cbp, pTd->be); uint32_t NewCbp; if (cbLeft >= Buf.cbTotal) NewCbp = 0; else { /* (len may have changed for short transfers) */ Buf.cbTotal = cbLeft; ohciR3BufUpdate(&Buf); Assert(Buf.cVecs >= 1); NewCbp = Buf.aVecs[Buf.cVecs-1].Addr + Buf.aVecs[Buf.cVecs-1].cb; } /* * Write back IN buffers. */ if ( pUrb->enmDir == VUSBDIRECTION_IN && ( pUrb->enmStatus == VUSBSTATUS_OK || pUrb->enmStatus == VUSBSTATUS_DATA_OVERRUN || pUrb->enmStatus == VUSBSTATUS_DATA_UNDERRUN) && Buf.cbTotal > 0) { Assert(Buf.cVecs > 0); /* Be paranoid */ if ( Buf.aVecs[0].cb > cbLeft || ( Buf.cVecs > 1 && Buf.aVecs[1].cb > (cbLeft - Buf.aVecs[0].cb))) { ohciR3RaiseUnrecoverableError(pDevIns, pThis, 1); return; } ohciR3PhysWrite(pDevIns, Buf.aVecs[0].Addr, pb, Buf.aVecs[0].cb); if (Buf.cVecs > 1) ohciR3PhysWrite(pDevIns, Buf.aVecs[1].Addr, pb + Buf.aVecs[0].cb, Buf.aVecs[1].cb); } /* advance the data buffer. */ cbLeft -= Buf.cbTotal; pb += Buf.cbTotal; /* * Set writeback field. */ /* zero out writeback fields for retirement */ pTd->hwinfo &= ~TD_HWINFO_CC; /* always update the CurrentBufferPointer; essential for underrun/overrun errors */ pTd->cbp = NewCbp; if (pUrb->enmStatus == VUSBSTATUS_OK) { pTd->hwinfo &= ~TD_HWINFO_ERRORS; /* update done queue interrupt timer */ uint32_t DoneInt = (pTd->hwinfo & TD_HWINFO_DI) >> 21; if ( DoneInt != 0x7 && DoneInt < pThis->dqic) pThis->dqic = DoneInt; Log(("%s: ohciR3RhXferCompleteGeneralURB: ED=%#010x TD=%#010x Age=%d enmStatus=%d cbTotal=%#x NewCbp=%#010RX32 dqic=%d\n", pUrb->pszDesc, pUrb->pHci->EdAddr, TdAddr, cFmAge, pUrb->enmStatus, Buf.cbTotal, NewCbp, pThis->dqic)); } else { Log(("%s: ohciR3RhXferCompleteGeneralURB: HALTED ED=%#010x TD=%#010x (age %d) pUrb->enmStatus=%d\n", pUrb->pszDesc, pUrb->pHci->EdAddr, TdAddr, cFmAge, pUrb->enmStatus)); pEd->HeadP |= ED_HEAD_HALTED; pThis->dqic = 0; /* "If the Transfer Descriptor is being retired with an error, * then the Done Queue Interrupt Counter is cleared as if the * InterruptDelay field were zero." */ switch (pUrb->enmStatus) { case VUSBSTATUS_STALL: pTd->hwinfo |= OHCI_CC_STALL; break; case VUSBSTATUS_CRC: pTd->hwinfo |= OHCI_CC_CRC; break; case VUSBSTATUS_DATA_UNDERRUN: pTd->hwinfo |= OHCI_CC_DATA_UNDERRUN; break; case VUSBSTATUS_DATA_OVERRUN: pTd->hwinfo |= OHCI_CC_DATA_OVERRUN; break; default: /* what the hell */ Log(("pUrb->enmStatus=%#x!!!\n", pUrb->enmStatus)); RT_FALL_THRU(); case VUSBSTATUS_DNR: pTd->hwinfo |= OHCI_CC_DNR; break; } } /* * Move on to the done list and write back the modified TD. */ # ifdef LOG_ENABLED if (!pThis->done) pThisCC->u32FmDoneQueueTail = pThis->HcFmNumber; # ifdef VBOX_STRICT ohciR3InDoneQueueAdd(pThisCC, TdAddr); # endif # endif pTd->NextTD = pThis->done; pThis->done = TdAddr; ohciR3WriteTd(pDevIns, TdAddr, pTd, "retired"); /* * If we've halted the endpoint, we stop here. * ohciR3UnlinkTds() will make sure we've only unliked the first TD. * * The reason for this is that while we can have more than one TD in a URB, real * OHCI hardware will only deal with one TD at the time and it's therefore incorrect * to retire TDs after the endpoint has been halted. Win2k will crash or enter infinite * kernel loop if we don't behave correctly. (See @bugref{1646}.) */ if (pEd->HeadP & ED_HEAD_HALTED) break; } RT_NOREF(pThisCC); } /** * Transfer completion callback routine. * * VUSB will call this when a transfer have been completed * in a one or another way. * * @param pInterface Pointer to OHCI::ROOTHUB::IRhPort. * @param pUrb Pointer to the URB in question. */ static DECLCALLBACK(void) ohciR3RhXferCompletion(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb) { POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); LogFlow(("%s: ohciR3RhXferCompletion: EdAddr=%#010RX32 cTds=%d TdAddr0=%#010RX32\n", pUrb->pszDesc, pUrb->pHci->EdAddr, pUrb->pHci->cTds, pUrb->paTds[0].TdAddr)); ohciR3Lock(pThisCC); int cFmAge = ohciR3InFlightRemoveUrb(pThis, pThisCC, pUrb); /* Do nothing requiring memory access if the HC encountered an unrecoverable error. */ if (!(pThis->intr_status & OHCI_INTR_UNRECOVERABLE_ERROR)) { pThis->fIdle = false; /* Mark as active */ /* get the current end point descriptor. */ OHCIED Ed; ohciR3ReadEd(pDevIns, pUrb->pHci->EdAddr, &Ed); /* * Check that the URB hasn't been canceled and then try unlink the TDs. * * We drop the URB if the ED is marked halted/skip ASSUMING that this * means the HCD has canceled the URB. * * If we succeed here (i.e. not dropping the URB), the TdCopy members will * be updated but not yet written. We will delay the writing till we're done * with the data copying, buffer pointer advancing and error handling. */ if (pUrb->enmStatus == VUSBSTATUS_UNDO) { /* Leave the TD alone - the HCD doesn't want us talking to the device. */ Log(("%s: ohciR3RhXferCompletion: CANCELED {ED=%#010x cTds=%d TD0=%#010x age %d}\n", pUrb->pszDesc, pUrb->pHci->EdAddr, pUrb->pHci->cTds, pUrb->paTds[0].TdAddr, cFmAge)); STAM_COUNTER_INC(&pThis->StatDroppedUrbs); ohciR3Unlock(pThisCC); return; } bool fHasBeenCanceled = false; if ( (Ed.HeadP & ED_HEAD_HALTED) || (Ed.hwinfo & ED_HWINFO_SKIP) || cFmAge < 0 || (fHasBeenCanceled = ohciR3HasUrbBeenCanceled(pDevIns, pThis, pUrb, &Ed)) || !ohciR3UnlinkTds(pDevIns, pThis, pUrb, &Ed) ) { Log(("%s: ohciR3RhXferCompletion: DROPPED {ED=%#010x cTds=%d TD0=%#010x age %d} because:%s%s%s%s%s!!!\n", pUrb->pszDesc, pUrb->pHci->EdAddr, pUrb->pHci->cTds, pUrb->paTds[0].TdAddr, cFmAge, (Ed.HeadP & ED_HEAD_HALTED) ? " ep halted" : "", (Ed.hwinfo & ED_HWINFO_SKIP) ? " ep skip" : "", (Ed.HeadP & ED_PTR_MASK) != pUrb->paTds[0].TdAddr ? " ep head-changed" : "", cFmAge < 0 ? " td not-in-flight" : "", fHasBeenCanceled ? " td canceled" : "")); NOREF(fHasBeenCanceled); STAM_COUNTER_INC(&pThis->StatDroppedUrbs); ohciR3Unlock(pThisCC); return; } /* * Complete the TD updating and write the back. * When appropriate also copy data back to the guest memory. */ if (pUrb->enmType == VUSBXFERTYPE_ISOC) ohciR3RhXferCompleteIsochronousURB(pDevIns, pThis, pThisCC, pUrb /*, &Ed , cFmAge*/); else ohciR3RhXferCompleteGeneralURB(pDevIns, pThis, pThisCC, pUrb, &Ed, cFmAge); /* finally write back the endpoint descriptor. */ ohciR3WriteEd(pDevIns, pUrb->pHci->EdAddr, &Ed); } ohciR3Unlock(pThisCC); } /** * Handle transfer errors. * * VUSB calls this when a transfer attempt failed. This function will respond * indicating whether to retry or complete the URB with failure. * * @returns true if the URB should be retired. * @returns false if the URB should be retried. * @param pInterface Pointer to OHCI::ROOTHUB::IRhPort. * @param pUrb Pointer to the URB in question. */ static DECLCALLBACK(bool) ohciR3RhXferError(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb) { POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); /* * Isochronous URBs can't be retried. */ if (pUrb->enmType == VUSBXFERTYPE_ISOC) return true; /* * Don't retry on stall. */ if (pUrb->enmStatus == VUSBSTATUS_STALL) { Log2(("%s: ohciR3RhXferError: STALL, giving up.\n", pUrb->pszDesc)); return true; } ohciR3Lock(pThisCC); bool fRetire = false; /* * Check if the TDs still are valid. * This will make sure the TdCopy is up to date. */ const uint32_t TdAddr = pUrb->paTds[0].TdAddr; /** @todo IMPORTANT! we must check if the ED is still valid at this point!!! */ if (ohciR3HasUrbBeenCanceled(pDevIns, pThis, pUrb, NULL)) { Log(("%s: ohciR3RhXferError: TdAddr0=%#x canceled!\n", pUrb->pszDesc, TdAddr)); fRetire = true; } else { /* * Get and update the error counter. */ POHCITD pTd = (POHCITD)&pUrb->paTds[0].TdCopy[0]; unsigned cErrs = (pTd->hwinfo & TD_HWINFO_ERRORS) >> TD_ERRORS_SHIFT; pTd->hwinfo &= ~TD_HWINFO_ERRORS; cErrs++; pTd->hwinfo |= (cErrs % TD_ERRORS_MAX) << TD_ERRORS_SHIFT; ohciR3WriteTd(pDevIns, TdAddr, pTd, "ohciR3RhXferError"); if (cErrs >= TD_ERRORS_MAX - 1) { Log2(("%s: ohciR3RhXferError: too many errors, giving up!\n", pUrb->pszDesc)); fRetire = true; } else Log2(("%s: ohciR3RhXferError: cErrs=%d: retrying...\n", pUrb->pszDesc, cErrs)); } ohciR3Unlock(pThisCC); return fRetire; } /** * Service a general transport descriptor. */ static bool ohciR3ServiceTd(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, VUSBXFERTYPE enmType, PCOHCIED pEd, uint32_t EdAddr, uint32_t TdAddr, uint32_t *pNextTdAddr, const char *pszListName) { RT_NOREF(pszListName); /* * Read the TD and setup the buffer data. */ OHCITD Td; ohciR3ReadTd(pDevIns, TdAddr, &Td); OHCIBUF Buf; ohciR3BufInit(&Buf, Td.cbp, Td.be); *pNextTdAddr = Td.NextTD & ED_PTR_MASK; /* * Determine the direction. */ VUSBDIRECTION enmDir; switch (pEd->hwinfo & ED_HWINFO_DIR) { case ED_HWINFO_OUT: enmDir = VUSBDIRECTION_OUT; break; case ED_HWINFO_IN: enmDir = VUSBDIRECTION_IN; break; default: switch (Td.hwinfo & TD_HWINFO_DIR) { case TD_HWINFO_OUT: enmDir = VUSBDIRECTION_OUT; break; case TD_HWINFO_IN: enmDir = VUSBDIRECTION_IN; break; case 0: enmDir = VUSBDIRECTION_SETUP; break; default: Log(("ohciR3ServiceTd: Invalid direction!!!! Td.hwinfo=%#x Ed.hwdinfo=%#x\n", Td.hwinfo, pEd->hwinfo)); ohciR3RaiseUnrecoverableError(pDevIns, pThis, 2); return false; } break; } pThis->fIdle = false; /* Mark as active */ /* * Allocate and initialize a new URB. */ PVUSBURB pUrb = VUSBIRhNewUrb(pThisCC->RootHub.pIRhConn, pEd->hwinfo & ED_HWINFO_FUNCTION, VUSB_DEVICE_PORT_INVALID, enmType, enmDir, Buf.cbTotal, 1, NULL); if (!pUrb) return false; /* retry later... */ pUrb->EndPt = (pEd->hwinfo & ED_HWINFO_ENDPOINT) >> ED_HWINFO_ENDPOINT_SHIFT; pUrb->fShortNotOk = !(Td.hwinfo & TD_HWINFO_ROUNDING); pUrb->enmStatus = VUSBSTATUS_OK; pUrb->pHci->EdAddr = EdAddr; pUrb->pHci->fUnlinked = false; pUrb->pHci->cTds = 1; pUrb->paTds[0].TdAddr = TdAddr; pUrb->pHci->u32FrameNo = pThis->HcFmNumber; AssertCompile(sizeof(pUrb->paTds[0].TdCopy) >= sizeof(Td)); memcpy(pUrb->paTds[0].TdCopy, &Td, sizeof(Td)); /* copy data if out bound transfer. */ pUrb->cbData = Buf.cbTotal; if ( Buf.cbTotal && Buf.cVecs > 0 && enmDir != VUSBDIRECTION_IN) { /* Be paranoid. */ if ( Buf.aVecs[0].cb > pUrb->cbData || ( Buf.cVecs > 1 && Buf.aVecs[1].cb > (pUrb->cbData - Buf.aVecs[0].cb))) { ohciR3RaiseUnrecoverableError(pDevIns, pThis, 3); VUSBIRhFreeUrb(pThisCC->RootHub.pIRhConn, pUrb); return false; } ohciR3PhysRead(pDevIns, Buf.aVecs[0].Addr, pUrb->abData, Buf.aVecs[0].cb); if (Buf.cVecs > 1) ohciR3PhysRead(pDevIns, Buf.aVecs[1].Addr, &pUrb->abData[Buf.aVecs[0].cb], Buf.aVecs[1].cb); } /* * Submit the URB. */ ohciR3InFlightAdd(pThis, pThisCC, TdAddr, pUrb); Log(("%s: ohciR3ServiceTd: submitting TdAddr=%#010x EdAddr=%#010x cbData=%#x\n", pUrb->pszDesc, TdAddr, EdAddr, pUrb->cbData)); ohciR3Unlock(pThisCC); int rc = VUSBIRhSubmitUrb(pThisCC->RootHub.pIRhConn, pUrb, &pThisCC->RootHub.Led); ohciR3Lock(pThisCC); if (RT_SUCCESS(rc)) return true; /* Failure cleanup. Can happen if we're still resetting the device or out of resources. */ Log(("ohciR3ServiceTd: failed submitting TdAddr=%#010x EdAddr=%#010x pUrb=%p!!\n", TdAddr, EdAddr, pUrb)); ohciR3InFlightRemove(pThis, pThisCC, TdAddr); return false; } /** * Service a the head TD of an endpoint. */ static bool ohciR3ServiceHeadTd(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, VUSBXFERTYPE enmType, PCOHCIED pEd, uint32_t EdAddr, const char *pszListName) { /* * Read the TD, after first checking if it's already in-flight. */ uint32_t TdAddr = pEd->HeadP & ED_PTR_MASK; if (ohciR3IsTdInFlight(pThisCC, TdAddr)) return false; # if defined(VBOX_STRICT) || defined(LOG_ENABLED) ohciR3InDoneQueueCheck(pThisCC, TdAddr); # endif return ohciR3ServiceTd(pDevIns, pThis, pThisCC, enmType, pEd, EdAddr, TdAddr, &TdAddr, pszListName); } /** * Service one or more general transport descriptors (bulk or interrupt). */ static bool ohciR3ServiceTdMultiple(PPDMDEVINS pDevIns, POHCI pThis, VUSBXFERTYPE enmType, PCOHCIED pEd, uint32_t EdAddr, uint32_t TdAddr, uint32_t *pNextTdAddr, const char *pszListName) { RT_NOREF(pszListName); /* * Read the TDs involved in this URB. */ struct OHCITDENTRY { /** The TD. */ OHCITD Td; /** The associated OHCI buffer tracker. */ OHCIBUF Buf; /** The TD address. */ uint32_t TdAddr; /** Pointer to the next element in the chain (stack). */ struct OHCITDENTRY *pNext; } Head; POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); # ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE ohciR3PhysReadCacheInvalidate(&pThisCC->CacheTD); # endif /* read the head */ ohciR3ReadTd(pDevIns, TdAddr, &Head.Td); ohciR3BufInit(&Head.Buf, Head.Td.cbp, Head.Td.be); Head.TdAddr = TdAddr; Head.pNext = NULL; /* combine with more TDs. */ struct OHCITDENTRY *pTail = &Head; unsigned cbTotal = pTail->Buf.cbTotal; unsigned cTds = 1; while ( (pTail->Buf.cbTotal == 0x1000 || pTail->Buf.cbTotal == 0x2000) && !(pTail->Td.hwinfo & TD_HWINFO_ROUNDING) /* This isn't right for *BSD, but let's not . */ && (pTail->Td.NextTD & ED_PTR_MASK) != (pEd->TailP & ED_PTR_MASK) && cTds < 128) { struct OHCITDENTRY *pCur = (struct OHCITDENTRY *)alloca(sizeof(*pCur)); pCur->pNext = NULL; pCur->TdAddr = pTail->Td.NextTD & ED_PTR_MASK; ohciR3ReadTd(pDevIns, pCur->TdAddr, &pCur->Td); ohciR3BufInit(&pCur->Buf, pCur->Td.cbp, pCur->Td.be); /* Don't combine if the direction doesn't match up. There can't actually be * a mismatch for bulk/interrupt EPs unless the guest is buggy. */ if ( (pCur->Td.hwinfo & (TD_HWINFO_DIR)) != (Head.Td.hwinfo & (TD_HWINFO_DIR))) break; pTail->pNext = pCur; pTail = pCur; cbTotal += pCur->Buf.cbTotal; cTds++; } /* calc next TD address */ *pNextTdAddr = pTail->Td.NextTD & ED_PTR_MASK; /* * Determine the direction. */ VUSBDIRECTION enmDir; switch (pEd->hwinfo & ED_HWINFO_DIR) { case ED_HWINFO_OUT: enmDir = VUSBDIRECTION_OUT; break; case ED_HWINFO_IN: enmDir = VUSBDIRECTION_IN; break; default: Log(("ohciR3ServiceTdMultiple: WARNING! Ed.hwdinfo=%#x bulk or interrupt EP shouldn't rely on the TD for direction...\n", pEd->hwinfo)); switch (Head.Td.hwinfo & TD_HWINFO_DIR) { case TD_HWINFO_OUT: enmDir = VUSBDIRECTION_OUT; break; case TD_HWINFO_IN: enmDir = VUSBDIRECTION_IN; break; default: Log(("ohciR3ServiceTdMultiple: Invalid direction!!!! Head.Td.hwinfo=%#x Ed.hwdinfo=%#x\n", Head.Td.hwinfo, pEd->hwinfo)); ohciR3RaiseUnrecoverableError(pDevIns, pThis, 4); return false; } break; } pThis->fIdle = false; /* Mark as active */ /* * Allocate and initialize a new URB. */ PVUSBURB pUrb = VUSBIRhNewUrb(pThisCC->RootHub.pIRhConn, pEd->hwinfo & ED_HWINFO_FUNCTION, VUSB_DEVICE_PORT_INVALID, enmType, enmDir, cbTotal, cTds, "ohciR3ServiceTdMultiple"); if (!pUrb) /* retry later... */ return false; Assert(pUrb->cbData == cbTotal); pUrb->enmType = enmType; pUrb->EndPt = (pEd->hwinfo & ED_HWINFO_ENDPOINT) >> ED_HWINFO_ENDPOINT_SHIFT; pUrb->enmDir = enmDir; pUrb->fShortNotOk = !(pTail->Td.hwinfo & TD_HWINFO_ROUNDING); pUrb->enmStatus = VUSBSTATUS_OK; pUrb->pHci->cTds = cTds; pUrb->pHci->EdAddr = EdAddr; pUrb->pHci->fUnlinked = false; pUrb->pHci->u32FrameNo = pThis->HcFmNumber; /* Copy data and TD information. */ unsigned iTd = 0; uint8_t *pb = &pUrb->abData[0]; for (struct OHCITDENTRY *pCur = &Head; pCur; pCur = pCur->pNext, iTd++) { /* data */ if ( cbTotal && enmDir != VUSBDIRECTION_IN && pCur->Buf.cVecs > 0) { ohciR3PhysRead(pDevIns, pCur->Buf.aVecs[0].Addr, pb, pCur->Buf.aVecs[0].cb); if (pCur->Buf.cVecs > 1) ohciR3PhysRead(pDevIns, pCur->Buf.aVecs[1].Addr, pb + pCur->Buf.aVecs[0].cb, pCur->Buf.aVecs[1].cb); } pb += pCur->Buf.cbTotal; /* TD info */ pUrb->paTds[iTd].TdAddr = pCur->TdAddr; AssertCompile(sizeof(pUrb->paTds[iTd].TdCopy) >= sizeof(pCur->Td)); memcpy(pUrb->paTds[iTd].TdCopy, &pCur->Td, sizeof(pCur->Td)); } /* * Submit the URB. */ ohciR3InFlightAddUrb(pThis, pThisCC, pUrb); Log(("%s: ohciR3ServiceTdMultiple: submitting cbData=%#x EdAddr=%#010x cTds=%d TdAddr0=%#010x\n", pUrb->pszDesc, pUrb->cbData, EdAddr, cTds, TdAddr)); ohciR3Unlock(pThisCC); int rc = VUSBIRhSubmitUrb(pThisCC->RootHub.pIRhConn, pUrb, &pThisCC->RootHub.Led); ohciR3Lock(pThisCC); if (RT_SUCCESS(rc)) return true; /* Failure cleanup. Can happen if we're still resetting the device or out of resources. */ Log(("ohciR3ServiceTdMultiple: failed submitting pUrb=%p cbData=%#x EdAddr=%#010x cTds=%d TdAddr0=%#010x - rc=%Rrc\n", pUrb, cbTotal, EdAddr, cTds, TdAddr, rc)); /* NB: We cannot call ohciR3InFlightRemoveUrb() because the URB is already gone! */ for (struct OHCITDENTRY *pCur = &Head; pCur; pCur = pCur->pNext, iTd++) ohciR3InFlightRemove(pThis, pThisCC, pCur->TdAddr); return false; } /** * Service the head TD of an endpoint. */ static bool ohciR3ServiceHeadTdMultiple(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, VUSBXFERTYPE enmType, PCOHCIED pEd, uint32_t EdAddr, const char *pszListName) { /* * First, check that it's not already in-flight. */ uint32_t TdAddr = pEd->HeadP & ED_PTR_MASK; if (ohciR3IsTdInFlight(pThisCC, TdAddr)) return false; # if defined(VBOX_STRICT) || defined(LOG_ENABLED) ohciR3InDoneQueueCheck(pThisCC, TdAddr); # endif return ohciR3ServiceTdMultiple(pDevIns, pThis, enmType, pEd, EdAddr, TdAddr, &TdAddr, pszListName); } /** * A worker for ohciR3ServiceIsochronousEndpoint which unlinks a ITD * that belongs to the past. */ static bool ohciR3ServiceIsochronousTdUnlink(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, POHCIITD pITd, uint32_t ITdAddr, uint32_t ITdAddrPrev, PVUSBURB pUrb, POHCIED pEd, uint32_t EdAddr) { LogFlow(("%s%sohciR3ServiceIsochronousTdUnlink: Unlinking ITD: ITdAddr=%#010x EdAddr=%#010x ITdAddrPrev=%#010x\n", pUrb ? pUrb->pszDesc : "", pUrb ? ": " : "", ITdAddr, EdAddr, ITdAddrPrev)); /* * Do the unlinking. */ const uint32_t ITdAddrNext = pITd->NextTD & ED_PTR_MASK; if (ITdAddrPrev) { /* Get validate the previous TD */ int iInFlightPrev = ohciR3InFlightFind(pThisCC, ITdAddrPrev); AssertMsgReturn(iInFlightPrev >= 0, ("ITdAddr=%#RX32\n", ITdAddrPrev), false); PVUSBURB pUrbPrev = pThisCC->aInFlight[iInFlightPrev].pUrb; if (ohciR3HasUrbBeenCanceled(pDevIns, pThis, pUrbPrev, pEd)) /* ensures the copy is correct. */ return false; /* Update the copy and write it back. */ POHCIITD pITdPrev = ((POHCIITD)pUrbPrev->paTds[0].TdCopy); pITdPrev->NextTD = (pITdPrev->NextTD & ~ED_PTR_MASK) | ITdAddrNext; ohciR3WriteITd(pDevIns, pThis, ITdAddrPrev, pITdPrev, "ohciR3ServiceIsochronousEndpoint"); } else { /* It's the head node. update the copy from the caller and write it back. */ pEd->HeadP = (pEd->HeadP & ~ED_PTR_MASK) | ITdAddrNext; ohciR3WriteEd(pDevIns, EdAddr, pEd); } /* * If it's in flight, just mark the URB as unlinked (there is only one ITD per URB atm). * Otherwise, retire it to the done queue with an error and cause a done line interrupt (?). */ if (pUrb) { pUrb->pHci->fUnlinked = true; if (ohciR3HasUrbBeenCanceled(pDevIns, pThis, pUrb, pEd)) /* ensures the copy is correct (paranoia). */ return false; POHCIITD pITdCopy = ((POHCIITD)pUrb->paTds[0].TdCopy); pITd->NextTD = pITdCopy->NextTD &= ~ED_PTR_MASK; } else { pITd->HwInfo &= ~ITD_HWINFO_CC; pITd->HwInfo |= OHCI_CC_DATA_OVERRUN; pITd->NextTD = pThis->done; pThis->done = ITdAddr; pThis->dqic = 0; } ohciR3WriteITd(pDevIns, pThis, ITdAddr, pITd, "ohciR3ServiceIsochronousTdUnlink"); return true; } /** * A worker for ohciR3ServiceIsochronousEndpoint which submits the specified TD. * * @returns true on success. * @returns false on failure to submit. * @param pDevIns The device instance. * @param pThis The OHCI controller instance data, shared edition. * @param pThisCC The OHCI controller instance data, ring-3 edition. * @param pITd The transfer descriptor to service. * @param ITdAddr The address of the transfer descriptor in gues memory. * @param R The start packet (frame) relative to the start of frame in HwInfo. * @param pEd The OHCI endpoint descriptor. * @param EdAddr The endpoint descriptor address in guest memory. */ static bool ohciR3ServiceIsochronousTd(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, POHCIITD pITd, uint32_t ITdAddr, const unsigned R, PCOHCIED pEd, uint32_t EdAddr) { /* * Determine the endpoint direction. */ VUSBDIRECTION enmDir; switch (pEd->hwinfo & ED_HWINFO_DIR) { case ED_HWINFO_OUT: enmDir = VUSBDIRECTION_OUT; break; case ED_HWINFO_IN: enmDir = VUSBDIRECTION_IN; break; default: Log(("ohciR3ServiceIsochronousTd: Invalid direction!!!! Ed.hwdinfo=%#x\n", pEd->hwinfo)); ohciR3RaiseUnrecoverableError(pDevIns, pThis, 5); return false; } /* * Extract the packet sizes and calc the total URB size. */ struct { uint16_t cb; uint16_t off; } aPkts[ITD_NUM_PSW]; /* first entry (R) */ uint32_t cbTotal = 0; if (((uint32_t)pITd->aPSW[R] >> ITD_PSW_CC_SHIFT) < (OHCI_CC_NOT_ACCESSED_0 >> TD_HWINFO_CC_SHIFT)) { Log(("ITdAddr=%RX32 PSW%d.CC=%#x < 'Not Accessed'!\n", ITdAddr, R, pITd->aPSW[R] >> ITD_PSW_CC_SHIFT)); /* => Unrecoverable Error*/ pThis->intr_status |= OHCI_INTR_UNRECOVERABLE_ERROR; return false; } uint16_t offPrev = aPkts[0].off = (pITd->aPSW[R] & ITD_PSW_OFFSET); /* R+1..cFrames */ const unsigned cFrames = ((pITd->HwInfo & ITD_HWINFO_FC) >> ITD_HWINFO_FC_SHIFT) + 1; for (unsigned iR = R + 1; iR < cFrames; iR++) { const uint16_t PSW = pITd->aPSW[iR]; const uint16_t off = aPkts[iR - R].off = (PSW & ITD_PSW_OFFSET); cbTotal += aPkts[iR - R - 1].cb = off - offPrev; if (off < offPrev) { Log(("ITdAddr=%RX32 PSW%d.offset=%#x < offPrev=%#x!\n", ITdAddr, iR, off, offPrev)); /* => Unrecoverable Error*/ ohciR3RaiseUnrecoverableError(pDevIns, pThis, 6); return false; } if (((uint32_t)PSW >> ITD_PSW_CC_SHIFT) < (OHCI_CC_NOT_ACCESSED_0 >> TD_HWINFO_CC_SHIFT)) { Log(("ITdAddr=%RX32 PSW%d.CC=%#x < 'Not Accessed'!\n", ITdAddr, iR, PSW >> ITD_PSW_CC_SHIFT)); /* => Unrecoverable Error*/ ohciR3RaiseUnrecoverableError(pDevIns, pThis, 7); return false; } offPrev = off; } /* calc offEnd and figure out the size of the last packet. */ const uint32_t offEnd = (pITd->BE & 0xfff) + (((pITd->BE & ITD_BP0_MASK) != (pITd->BP0 & ITD_BP0_MASK)) << 12) + 1 /* BE is inclusive */; if (offEnd < offPrev) { Log(("ITdAddr=%RX32 offEnd=%#x < offPrev=%#x!\n", ITdAddr, offEnd, offPrev)); /* => Unrecoverable Error*/ ohciR3RaiseUnrecoverableError(pDevIns, pThis, 8); return false; } cbTotal += aPkts[cFrames - 1 - R].cb = offEnd - offPrev; Assert(cbTotal <= 0x2000); pThis->fIdle = false; /* Mark as active */ /* * Allocate and initialize a new URB. */ PVUSBURB pUrb = VUSBIRhNewUrb(pThisCC->RootHub.pIRhConn, pEd->hwinfo & ED_HWINFO_FUNCTION, VUSB_DEVICE_PORT_INVALID, VUSBXFERTYPE_ISOC, enmDir, cbTotal, 1, NULL); if (!pUrb) /* retry later... */ return false; pUrb->EndPt = (pEd->hwinfo & ED_HWINFO_ENDPOINT) >> ED_HWINFO_ENDPOINT_SHIFT; pUrb->fShortNotOk = false; pUrb->enmStatus = VUSBSTATUS_OK; pUrb->pHci->EdAddr = EdAddr; pUrb->pHci->cTds = 1; pUrb->pHci->fUnlinked = false; pUrb->pHci->u32FrameNo = pThis->HcFmNumber; pUrb->paTds[0].TdAddr = ITdAddr; AssertCompile(sizeof(pUrb->paTds[0].TdCopy) >= sizeof(*pITd)); memcpy(pUrb->paTds[0].TdCopy, pITd, sizeof(*pITd)); # if 0 /* color the data */ memset(pUrb->abData, 0xfe, cbTotal); # endif /* copy the data */ if ( cbTotal && enmDir != VUSBDIRECTION_IN) { const uint32_t off0 = pITd->aPSW[R] & ITD_PSW_OFFSET; if (off0 < 0x1000) { if (offEnd > 0x1000) { /* both pages. */ const unsigned cb0 = 0x1000 - off0; ohciR3PhysRead(pDevIns, (pITd->BP0 & ITD_BP0_MASK) + off0, &pUrb->abData[0], cb0); ohciR3PhysRead(pDevIns, pITd->BE & ITD_BP0_MASK, &pUrb->abData[cb0], offEnd & 0xfff); } else /* a portion of the 1st page. */ ohciR3PhysRead(pDevIns, (pITd->BP0 & ITD_BP0_MASK) + off0, pUrb->abData, offEnd - off0); } else /* a portion of the 2nd page. */ ohciR3PhysRead(pDevIns, (pITd->BE & UINT32_C(0xfffff000)) + (off0 & 0xfff), pUrb->abData, cbTotal); } /* setup the packets */ pUrb->cIsocPkts = cFrames - R; unsigned off = 0; for (unsigned i = 0; i < pUrb->cIsocPkts; i++) { pUrb->aIsocPkts[i].enmStatus = VUSBSTATUS_NOT_ACCESSED; pUrb->aIsocPkts[i].off = off; off += pUrb->aIsocPkts[i].cb = aPkts[i].cb; } Assert(off == cbTotal); /* * Submit the URB. */ ohciR3InFlightAdd(pThis, pThisCC, ITdAddr, pUrb); Log(("%s: ohciR3ServiceIsochronousTd: submitting cbData=%#x cIsocPkts=%d EdAddr=%#010x TdAddr=%#010x SF=%#x (%#x)\n", pUrb->pszDesc, pUrb->cbData, pUrb->cIsocPkts, EdAddr, ITdAddr, pITd->HwInfo & ITD_HWINFO_SF, pThis->HcFmNumber)); ohciR3Unlock(pThisCC); int rc = VUSBIRhSubmitUrb(pThisCC->RootHub.pIRhConn, pUrb, &pThisCC->RootHub.Led); ohciR3Lock(pThisCC); if (RT_SUCCESS(rc)) return true; /* Failure cleanup. Can happen if we're still resetting the device or out of resources. */ Log(("ohciR3ServiceIsochronousTd: failed submitting pUrb=%p cbData=%#x EdAddr=%#010x cTds=%d ITdAddr0=%#010x - rc=%Rrc\n", pUrb, cbTotal, EdAddr, 1, ITdAddr, rc)); ohciR3InFlightRemove(pThis, pThisCC, ITdAddr); return false; } /** * Service an isochronous endpoint. */ static void ohciR3ServiceIsochronousEndpoint(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, POHCIED pEd, uint32_t EdAddr) { /* * We currently process this as if the guest follows the interrupt end point chaining * hierarchy described in the documenation. This means that for an isochronous endpoint * with a 1 ms interval we expect to find in-flight TDs at the head of the list. We will * skip over all in-flight TDs which timeframe has been exceed. Those which aren't in * flight but which are too late will be retired (possibly out of order, but, we don't * care right now). * * When we reach a TD which still has a buffer which is due for take off, we will * stop iterating TDs. If it's in-flight, there isn't anything to be done. Otherwise * we will push it onto the runway for immediate take off. In this process we * might have to complete buffers which didn't make it on time, something which * complicates the kind of status info we need to keep around for the TD. * * Note: We're currently not making any attempt at reassembling ITDs into URBs. * However, this will become necessary because of EMT scheduling and guest * like linux using one TD for each frame (simple but inefficient for us). */ OHCIITD ITd; uint32_t ITdAddr = pEd->HeadP & ED_PTR_MASK; uint32_t ITdAddrPrev = 0; uint32_t u32NextFrame = UINT32_MAX; const uint16_t u16CurFrame = pThis->HcFmNumber; for (;;) { /* check for end-of-chain. */ if ( ITdAddr == (pEd->TailP & ED_PTR_MASK) || !ITdAddr) break; /* * If isochronous endpoints are around, don't slow down the timer. Getting the timing right * is difficult enough as it is. */ pThis->fIdle = false; /* * Read the current ITD and check what we're supposed to do about it. */ ohciR3ReadITd(pDevIns, pThis, ITdAddr, &ITd); const uint32_t ITdAddrNext = ITd.NextTD & ED_PTR_MASK; const int16_t R = u16CurFrame - (uint16_t)(ITd.HwInfo & ITD_HWINFO_SF); /* 4.3.2.3 */ const int16_t cFrames = ((ITd.HwInfo & ITD_HWINFO_FC) >> ITD_HWINFO_FC_SHIFT) + 1; if (R < cFrames) { /* * It's inside the current or a future launch window. * * We will try maximize the TD in flight here to deal with EMT scheduling * issues and similar stuff which will screw up the time. So, we will only * stop submitting TD when we reach a gap (in time) or end of the list. */ if ( R < 0 /* (a future frame) */ && (uint16_t)u32NextFrame != (uint16_t)(ITd.HwInfo & ITD_HWINFO_SF)) break; if (ohciR3InFlightFind(pThisCC, ITdAddr) < 0) if (!ohciR3ServiceIsochronousTd(pDevIns, pThis, pThisCC, &ITd, ITdAddr, R < 0 ? 0 : R, pEd, EdAddr)) break; ITdAddrPrev = ITdAddr; } else { # if 1 /* * Ok, the launch window for this TD has passed. * If it's not in flight it should be retired with a DataOverrun status (TD). * * Don't remove in-flight TDs before they complete. * Windows will, upon the completion of another ITD it seems, check for if * any other TDs has been unlinked. If we unlink them before they really * complete all the packet status codes will be NotAccessed and Windows * will fail the URB with status USBD_STATUS_ISOCH_REQUEST_FAILED. * * I don't know if unlinking TDs out of order could cause similar problems, * time will show. */ int iInFlight = ohciR3InFlightFind(pThisCC, ITdAddr); if (iInFlight >= 0) ITdAddrPrev = ITdAddr; else if (!ohciR3ServiceIsochronousTdUnlink(pDevIns, pThis, pThisCC, &ITd, ITdAddr, ITdAddrPrev, NULL, pEd, EdAddr)) { Log(("ohciR3ServiceIsochronousEndpoint: Failed unlinking old ITD.\n")); break; } # else /* BAD IDEA: */ /* * Ok, the launch window for this TD has passed. * If it's not in flight it should be retired with a DataOverrun status (TD). * * If it's in flight we will try unlink it from the list prematurely to * help the guest to move on and shorten the list we have to walk. We currently * are successful with the first URB but then it goes too slowly... */ int iInFlight = ohciR3InFlightFind(pThis, ITdAddr); if (!ohciR3ServiceIsochronousTdUnlink(pThis, &ITd, ITdAddr, ITdAddrPrev, iInFlight < 0 ? NULL : pThis->aInFlight[iInFlight].pUrb, pEd, EdAddr)) { Log(("ohciR3ServiceIsochronousEndpoint: Failed unlinking old ITD.\n")); break; } # endif } /* advance to the next ITD */ ITdAddr = ITdAddrNext; u32NextFrame = (ITd.HwInfo & ITD_HWINFO_SF) + cFrames; } } /** * Checks if a endpoints has TDs queued and is ready to have them processed. * * @returns true if it's ok to process TDs. * @param pEd The endpoint data. */ DECLINLINE(bool) ohciR3IsEdReady(PCOHCIED pEd) { return (pEd->HeadP & ED_PTR_MASK) != (pEd->TailP & ED_PTR_MASK) && !(pEd->HeadP & ED_HEAD_HALTED) && !(pEd->hwinfo & ED_HWINFO_SKIP); } /** * Checks if an endpoint has TDs queued (not necessarily ready to have them processed). * * @returns true if endpoint may have TDs queued. * @param pEd The endpoint data. */ DECLINLINE(bool) ohciR3IsEdPresent(PCOHCIED pEd) { return (pEd->HeadP & ED_PTR_MASK) != (pEd->TailP & ED_PTR_MASK) && !(pEd->HeadP & ED_HEAD_HALTED); } /** * Services the bulk list. * * On the bulk list we must reassemble URBs from multiple TDs using heuristics * derived from USB tracing done in the guests and guest source code (when available). */ static void ohciR3ServiceBulkList(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { # ifdef LOG_ENABLED if (g_fLogBulkEPs) ohciR3DumpEdList(pDevIns, pThisCC, pThis->bulk_head, "Bulk before", true); if (pThis->bulk_cur) Log(("ohciR3ServiceBulkList: bulk_cur=%#010x before listprocessing!!! HCD have positioned us!!!\n", pThis->bulk_cur)); # endif /* * ", HC will start processing the Bulk list and will set BF [BulkListFilled] to 0" * - We've simplified and are always starting at the head of the list and working * our way thru to the end each time. */ pThis->status &= ~OHCI_STATUS_BLF; pThis->fBulkNeedsCleaning = false; pThis->bulk_cur = 0; uint32_t EdAddr = pThis->bulk_head; uint32_t cIterations = 256; while (EdAddr && (pThis->ctl & OHCI_CTL_BLE) && (cIterations-- > 0)) { OHCIED Ed; /* Bail if previous processing ended up in the unrecoverable error state. */ if (pThis->intr_status & OHCI_INTR_UNRECOVERABLE_ERROR) break; ohciR3ReadEd(pDevIns, EdAddr, &Ed); Assert(!(Ed.hwinfo & ED_HWINFO_ISO)); /* the guest is screwing us */ if (ohciR3IsEdReady(&Ed)) { pThis->status |= OHCI_STATUS_BLF; pThis->fBulkNeedsCleaning = true; # if 1 /* * After we figured out that all the TDs submitted for dealing with MSD * read/write data really makes up on single URB, and that we must * reassemble these TDs into an URB before submitting it, there is no * longer any need for servicing anything other than the head *URB* * on a bulk endpoint. */ ohciR3ServiceHeadTdMultiple(pDevIns, pThis, pThisCC, VUSBXFERTYPE_BULK, &Ed, EdAddr, "Bulk"); # else /* * This alternative code was used before we started reassembling URBs from * multiple TDs. We keep it handy for debugging. */ uint32_t TdAddr = Ed.HeadP & ED_PTR_MASK; if (!ohciR3IsTdInFlight(pThis, TdAddr)) { do { if (!ohciR3ServiceTdMultiple(pThis, VUSBXFERTYPE_BULK, &Ed, EdAddr, TdAddr, &TdAddr, "Bulk")) { LogFlow(("ohciR3ServiceBulkList: ohciR3ServiceTdMultiple -> false\n")); break; } if ( (TdAddr & ED_PTR_MASK) == (Ed.TailP & ED_PTR_MASK) || !TdAddr /* paranoia */) { LogFlow(("ohciR3ServiceBulkList: TdAddr=%#010RX32 Ed.TailP=%#010RX32\n", TdAddr, Ed.TailP)); break; } ohciR3ReadEd(pDevIns, EdAddr, &Ed); /* It might have been updated on URB completion. */ } while (ohciR3IsEdReady(&Ed)); } # endif } else { if (Ed.hwinfo & ED_HWINFO_SKIP) { LogFlow(("ohciR3ServiceBulkList: Ed=%#010RX32 Ed.TailP=%#010RX32 SKIP\n", EdAddr, Ed.TailP)); /* If the ED is in 'skip' state, no transactions on it are allowed and we must * cancel outstanding URBs, if any. */ uint32_t TdAddr = Ed.HeadP & ED_PTR_MASK; PVUSBURB pUrb = ohciR3TdInFlightUrb(pThisCC, TdAddr); if (pUrb) pThisCC->RootHub.pIRhConn->pfnCancelUrbsEp(pThisCC->RootHub.pIRhConn, pUrb); } } /* Trivial loop detection. */ if (EdAddr == (Ed.NextED & ED_PTR_MASK)) break; /* Proceed to the next endpoint. */ EdAddr = Ed.NextED & ED_PTR_MASK; } # ifdef LOG_ENABLED if (g_fLogBulkEPs) ohciR3DumpEdList(pDevIns, pThisCC, pThis->bulk_head, "Bulk after ", true); # endif } /** * Abort outstanding transfers on the bulk list. * * If the guest disabled bulk list processing, we must abort any outstanding transfers * (that is, cancel in-flight URBs associated with the list). This is required because * there may be outstanding read URBs that will never get a response from the device * and would block further communication. */ static void ohciR3UndoBulkList(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { # ifdef LOG_ENABLED if (g_fLogBulkEPs) ohciR3DumpEdList(pDevIns, pThisCC, pThis->bulk_head, "Bulk before", true); if (pThis->bulk_cur) Log(("ohciR3UndoBulkList: bulk_cur=%#010x before list processing!!! HCD has positioned us!!!\n", pThis->bulk_cur)); # endif /* This flag follows OHCI_STATUS_BLF, but BLF doesn't change when list processing is disabled. */ pThis->fBulkNeedsCleaning = false; uint32_t EdAddr = pThis->bulk_head; uint32_t cIterations = 256; while (EdAddr && (cIterations-- > 0)) { OHCIED Ed; ohciR3ReadEd(pDevIns, EdAddr, &Ed); Assert(!(Ed.hwinfo & ED_HWINFO_ISO)); /* the guest is screwing us */ if (ohciR3IsEdPresent(&Ed)) { uint32_t TdAddr = Ed.HeadP & ED_PTR_MASK; if (ohciR3IsTdInFlight(pThisCC, TdAddr)) { LogFlow(("ohciR3UndoBulkList: Ed=%#010RX32 Ed.TailP=%#010RX32 UNDO\n", EdAddr, Ed.TailP)); PVUSBURB pUrb = ohciR3TdInFlightUrb(pThisCC, TdAddr); if (pUrb) pThisCC->RootHub.pIRhConn->pfnCancelUrbsEp(pThisCC->RootHub.pIRhConn, pUrb); } } /* Trivial loop detection. */ if (EdAddr == (Ed.NextED & ED_PTR_MASK)) break; /* Proceed to the next endpoint. */ EdAddr = Ed.NextED & ED_PTR_MASK; } } /** * Services the control list. * * The control list has complex URB assembling, but that's taken * care of at VUSB level (unlike the other transfer types). */ static void ohciR3ServiceCtrlList(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { # ifdef LOG_ENABLED if (g_fLogControlEPs) ohciR3DumpEdList(pDevIns, pThisCC, pThis->ctrl_head, "Ctrl before", true); if (pThis->ctrl_cur) Log(("ohciR3ServiceCtrlList: ctrl_cur=%010x before list processing!!! HCD have positioned us!!!\n", pThis->ctrl_cur)); # endif /* * ", HC will start processing the list and will set ControlListFilled to 0" * - We've simplified and are always starting at the head of the list and working * our way thru to the end each time. */ pThis->status &= ~OHCI_STATUS_CLF; pThis->ctrl_cur = 0; uint32_t EdAddr = pThis->ctrl_head; uint32_t cIterations = 256; while ( EdAddr && (pThis->ctl & OHCI_CTL_CLE) && (cIterations-- > 0)) { OHCIED Ed; /* Bail if previous processing ended up in the unrecoverable error state. */ if (pThis->intr_status & OHCI_INTR_UNRECOVERABLE_ERROR) break; ohciR3ReadEd(pDevIns, EdAddr, &Ed); Assert(!(Ed.hwinfo & ED_HWINFO_ISO)); /* the guest is screwing us */ if (ohciR3IsEdReady(&Ed)) { # if 1 /* * Control TDs depends on order and stage. Only one can be in-flight * at any given time. OTOH, some stages are completed immediately, * so we process the list until we've got a head which is in-flight * or reach the end of the list. */ do { if ( !ohciR3ServiceHeadTd(pDevIns, pThis, pThisCC, VUSBXFERTYPE_CTRL, &Ed, EdAddr, "Control") || ohciR3IsTdInFlight(pThisCC, Ed.HeadP & ED_PTR_MASK)) { pThis->status |= OHCI_STATUS_CLF; break; } ohciR3ReadEd(pDevIns, EdAddr, &Ed); /* It might have been updated on URB completion. */ } while (ohciR3IsEdReady(&Ed)); # else /* Simplistic, for debugging. */ ohciR3ServiceHeadTd(pThis, VUSBXFERTYPE_CTRL, &Ed, EdAddr, "Control"); pThis->status |= OHCI_STATUS_CLF; # endif } /* Trivial loop detection. */ if (EdAddr == (Ed.NextED & ED_PTR_MASK)) break; /* Proceed to the next endpoint. */ EdAddr = Ed.NextED & ED_PTR_MASK; } # ifdef LOG_ENABLED if (g_fLogControlEPs) ohciR3DumpEdList(pDevIns, pThisCC, pThis->ctrl_head, "Ctrl after ", true); # endif } /** * Services the periodic list. * * On the interrupt portion of the periodic list we must reassemble URBs from multiple * TDs using heuristics derived from USB tracing done in the guests and guest source * code (when available). */ static void ohciR3ServicePeriodicList(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { /* * Read the list head from the HCCA. */ const unsigned iList = pThis->HcFmNumber % OHCI_HCCA_NUM_INTR; uint32_t EdAddr; ohciR3GetDWords(pDevIns, pThis->hcca + iList * sizeof(EdAddr), &EdAddr, 1); # ifdef LOG_ENABLED const uint32_t EdAddrHead = EdAddr; if (g_fLogInterruptEPs) { char sz[48]; RTStrPrintf(sz, sizeof(sz), "Int%02x before", iList); ohciR3DumpEdList(pDevIns, pThisCC, EdAddrHead, sz, true); } # endif /* * Iterate the endpoint list. */ unsigned cIterations = 128; while (EdAddr && (pThis->ctl & OHCI_CTL_PLE) && (cIterations-- > 0)) { OHCIED Ed; /* Bail if previous processing ended up in the unrecoverable error state. */ if (pThis->intr_status & OHCI_INTR_UNRECOVERABLE_ERROR) break; ohciR3ReadEd(pDevIns, EdAddr, &Ed); if (ohciR3IsEdReady(&Ed)) { /* * "There is no separate head pointer of isochronous transfers. The first * isochronous Endpoint Descriptor simply links to the last interrupt * Endpoint Descriptor." */ if (!(Ed.hwinfo & ED_HWINFO_ISO)) { /* * Presently we will only process the head URB on an interrupt endpoint. */ ohciR3ServiceHeadTdMultiple(pDevIns, pThis, pThisCC, VUSBXFERTYPE_INTR, &Ed, EdAddr, "Periodic"); } else if (pThis->ctl & OHCI_CTL_IE) { /* * Presently only the head ITD. */ ohciR3ServiceIsochronousEndpoint(pDevIns, pThis, pThisCC, &Ed, EdAddr); } else break; } else { if (Ed.hwinfo & ED_HWINFO_SKIP) { Log3(("ohciR3ServicePeriodicList: Ed=%#010RX32 Ed.TailP=%#010RX32 SKIP\n", EdAddr, Ed.TailP)); /* If the ED is in 'skip' state, no transactions on it are allowed and we must * cancel outstanding URBs, if any. */ uint32_t TdAddr = Ed.HeadP & ED_PTR_MASK; PVUSBURB pUrb = ohciR3TdInFlightUrb(pThisCC, TdAddr); if (pUrb) pThisCC->RootHub.pIRhConn->pfnCancelUrbsEp(pThisCC->RootHub.pIRhConn, pUrb); } } /* Trivial loop detection. */ if (EdAddr == (Ed.NextED & ED_PTR_MASK)) break; /* Proceed to the next endpoint. */ EdAddr = Ed.NextED & ED_PTR_MASK; } # ifdef LOG_ENABLED if (g_fLogInterruptEPs) { char sz[48]; RTStrPrintf(sz, sizeof(sz), "Int%02x after ", iList); ohciR3DumpEdList(pDevIns, pThisCC, EdAddrHead, sz, true); } # endif } /** * Update the HCCA. * * @param pDevIns The device instance. * @param pThis The OHCI controller instance data, shared edition. * @param pThisCC The OHCI controller instance data, ring-3 edition. */ static void ohciR3UpdateHCCA(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { OCHIHCCA hcca; ohciR3PhysRead(pDevIns, pThis->hcca + OHCI_HCCA_OFS, &hcca, sizeof(hcca)); hcca.frame = RT_H2LE_U16((uint16_t)pThis->HcFmNumber); hcca.pad = 0; bool fWriteDoneHeadInterrupt = false; if ( pThis->dqic == 0 && (pThis->intr_status & OHCI_INTR_WRITE_DONE_HEAD) == 0) { uint32_t done = pThis->done; if (pThis->intr_status & ~( OHCI_INTR_MASTER_INTERRUPT_ENABLED | OHCI_INTR_OWNERSHIP_CHANGE | OHCI_INTR_WRITE_DONE_HEAD) ) done |= 0x1; hcca.done = RT_H2LE_U32(done); pThis->done = 0; pThis->dqic = 0x7; Log(("ohci: Writeback Done (%#010x) on frame %#x (age %#x)\n", hcca.done, pThis->HcFmNumber, pThis->HcFmNumber - pThisCC->u32FmDoneQueueTail)); # ifdef LOG_ENABLED ohciR3DumpTdQueue(pDevIns, pThisCC, hcca.done & ED_PTR_MASK, "DoneQueue"); # endif Assert(RT_OFFSETOF(OCHIHCCA, done) == 4); # if defined(VBOX_STRICT) || defined(LOG_ENABLED) ohciR3InDoneQueueZap(pThisCC); # endif fWriteDoneHeadInterrupt = true; } Log3(("ohci: Updating HCCA on frame %#x\n", pThis->HcFmNumber)); ohciR3PhysWriteMeta(pDevIns, pThis->hcca + OHCI_HCCA_OFS, (uint8_t *)&hcca, sizeof(hcca)); if (fWriteDoneHeadInterrupt) ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_WRITE_DONE_HEAD); RT_NOREF(pThisCC); } /** * Go over the in-flight URB list and cancel any URBs that are no longer in use. * This occurs when the host removes EDs or TDs from the lists and we don't notice * the sKip bit. Such URBs must be promptly canceled, otherwise there is a risk * they might "steal" data destined for another URB. */ static void ohciR3CancelOrphanedURBs(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { bool fValidHCCA = !( pThis->hcca >= OHCI_HCCA_MASK || pThis->hcca < ~OHCI_HCCA_MASK); unsigned i, cLeft; int j; uint32_t EdAddr; PVUSBURB pUrb; /* If the HCCA is not currently valid, or there are no in-flight URBs, * there's nothing to do. */ if (!fValidHCCA || !pThisCC->cInFlight) return; /* Initially mark all in-flight URBs as inactive. */ for (i = 0, cLeft = pThisCC->cInFlight; cLeft && i < RT_ELEMENTS(pThisCC->aInFlight); i++) { if (pThisCC->aInFlight[i].pUrb) { pThisCC->aInFlight[i].fInactive = true; cLeft--; } } Assert(cLeft == 0); # ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE /* Get hcca data to minimize calls to ohciR3GetDWords/PDMDevHlpPCIPhysRead. */ uint32_t au32HCCA[OHCI_HCCA_NUM_INTR]; ohciR3GetDWords(pDevIns, pThis->hcca, au32HCCA, OHCI_HCCA_NUM_INTR); # endif /* Go over all bulk/control/interrupt endpoint lists; any URB found in these lists * is marked as active again. */ for (i = 0; i < OHCI_HCCA_NUM_INTR + 2; i++) { switch (i) { case OHCI_HCCA_NUM_INTR: EdAddr = pThis->bulk_head; break; case OHCI_HCCA_NUM_INTR + 1: EdAddr = pThis->ctrl_head; break; default: # ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE EdAddr = au32HCCA[i]; # else ohciR3GetDWords(pDevIns, pThis->hcca + i * sizeof(EdAddr), &EdAddr, 1); # endif break; } unsigned cIterED = 128; while ( EdAddr && (cIterED-- > 0)) { OHCIED Ed; OHCITD Td; ohciR3ReadEd(pDevIns, EdAddr, &Ed); uint32_t TdAddr = Ed.HeadP & ED_PTR_MASK; uint32_t TailP = Ed.TailP & ED_PTR_MASK; unsigned cIterTD = 0; if ( !(Ed.hwinfo & ED_HWINFO_SKIP) && (TdAddr != TailP)) { # ifdef VBOX_WITH_OHCI_PHYS_READ_CACHE ohciR3PhysReadCacheInvalidate(&pThisCC->CacheTD); # endif do { ohciR3ReadTd(pDevIns, TdAddr, &Td); j = ohciR3InFlightFind(pThisCC, TdAddr); if (j > -1) pThisCC->aInFlight[j].fInactive = false; TdAddr = Td.NextTD & ED_PTR_MASK; /* See #8125. * Sometimes the ED is changed by the guest between ohciR3ReadEd above and here. * Then the code reads TD pointed by the new TailP, which is not allowed. * Luckily Windows guests have Td.NextTD = 0 in the tail TD. * Also having a real TD at 0 is very unlikely. * So do not continue. */ if (TdAddr == 0) break; /* Failsafe for temporarily looped lists. */ if (++cIterTD == 128) break; } while (TdAddr != (Ed.TailP & ED_PTR_MASK)); } /* Trivial loop detection. */ if (EdAddr == (Ed.NextED & ED_PTR_MASK)) break; /* Proceed to the next endpoint. */ EdAddr = Ed.NextED & ED_PTR_MASK; } } /* In-flight URBs still marked as inactive are not used anymore and need * to be canceled. */ for (i = 0, cLeft = pThisCC->cInFlight; cLeft && i < RT_ELEMENTS(pThisCC->aInFlight); i++) { if (pThisCC->aInFlight[i].pUrb) { cLeft--; pUrb = pThisCC->aInFlight[i].pUrb; if ( pThisCC->aInFlight[i].fInactive && pUrb->enmState == VUSBURBSTATE_IN_FLIGHT && pUrb->enmType != VUSBXFERTYPE_CTRL) pThisCC->RootHub.pIRhConn->pfnCancelUrbsEp(pThisCC->RootHub.pIRhConn, pUrb); } } Assert(cLeft == 0); } /** * Generate a Start-Of-Frame event, and set a timer for End-Of-Frame. */ static void ohciR3StartOfFrame(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { # ifdef LOG_ENABLED const uint32_t status_old = pThis->status; # endif /* * Update HcFmRemaining.FRT and update start of frame time. */ pThis->frt = pThis->fit; pThis->SofTime += pThis->cTicksPerFrame; /* * Check that the HCCA address isn't bogus. Linux 2.4.x is known to start * the bus with a hcca of 0 to work around problem with a specific controller. */ bool fValidHCCA = !( pThis->hcca >= OHCI_HCCA_MASK || pThis->hcca < ~OHCI_HCCA_MASK); # if 1 /* * Update the HCCA. * Should be done after SOF but before HC read first ED in this frame. */ if (fValidHCCA) ohciR3UpdateHCCA(pDevIns, pThis, pThisCC); # endif /* "After writing to HCCA, HC will set SF in HcInterruptStatus" - guest isn't executing, so ignore the order! */ ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_START_OF_FRAME); if (pThis->fno) { ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_FRAMENUMBER_OVERFLOW); pThis->fno = 0; } /* If the HCCA address is invalid, we're quitting here to avoid doing something which cannot be reported to the HCD. */ if (!fValidHCCA) { Log(("ohciR3StartOfFrame: skipping hcca part because hcca=%RX32 (our 'valid' range: %RX32-%RX32)\n", pThis->hcca, ~OHCI_HCCA_MASK, OHCI_HCCA_MASK)); return; } /* * Periodic EPs. */ if (pThis->ctl & OHCI_CTL_PLE) ohciR3ServicePeriodicList(pDevIns, pThis, pThisCC); /* * Control EPs. */ if ( (pThis->ctl & OHCI_CTL_CLE) && (pThis->status & OHCI_STATUS_CLF) ) ohciR3ServiceCtrlList(pDevIns, pThis, pThisCC); /* * Bulk EPs. */ if ( (pThis->ctl & OHCI_CTL_BLE) && (pThis->status & OHCI_STATUS_BLF)) ohciR3ServiceBulkList(pDevIns, pThis, pThisCC); else if ((pThis->status & OHCI_STATUS_BLF) && pThis->fBulkNeedsCleaning) ohciR3UndoBulkList(pDevIns, pThis, pThisCC); /* If list disabled but not empty, abort endpoints. */ # if 0 /* * Update the HCCA after processing the lists and everything. A bit experimental. * * ASSUME the guest won't be very upset if a TD is completed, retired and handed * back immediately. The idea is to be able to retire the data and/or status stages * of a control transfer together with the setup stage, thus saving a frame. This * behaviour is should be perfectly ok, since the setup (and maybe data) stages * have already taken at least one frame to complete. * * But, when implementing the first synchronous virtual USB devices, we'll have to * verify that the guest doesn't choke when having a TD returned in the same frame * as it was submitted. */ ohciR3UpdateHCCA(pThis); # endif # ifdef LOG_ENABLED if (pThis->status ^ status_old) { uint32_t val = pThis->status; uint32_t chg = val ^ status_old; NOREF(chg); Log2(("ohciR3StartOfFrame: HcCommandStatus=%#010x: %sHCR=%d %sCLF=%d %sBLF=%d %sOCR=%d %sSOC=%d\n", val, chg & RT_BIT(0) ? "*" : "", val & 1, chg & RT_BIT(1) ? "*" : "", (val >> 1) & 1, chg & RT_BIT(2) ? "*" : "", (val >> 2) & 1, chg & RT_BIT(3) ? "*" : "", (val >> 3) & 1, chg & (3<<16)? "*" : "", (val >> 16) & 3)); } # endif } /** * Updates the HcFmNumber and FNO registers. */ static void ohciR3BumpFrameNumber(POHCI pThis) { const uint16_t u16OldFmNumber = pThis->HcFmNumber++; if ((u16OldFmNumber ^ pThis->HcFmNumber) & RT_BIT(15)) pThis->fno = 1; } /** * Callback for periodic frame processing. */ static DECLCALLBACK(bool) ohciR3StartFrame(PVUSBIROOTHUBPORT pInterface, uint32_t u32FrameNo) { RT_NOREF(u32FrameNo); POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); ohciR3Lock(pThisCC); /* Reset idle detection flag */ pThis->fIdle = true; # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS physReadStatsReset(&g_PhysReadState); # endif if (!(pThis->intr_status & OHCI_INTR_UNRECOVERABLE_ERROR)) { /* Frame boundary, so do EOF stuff here. */ ohciR3BumpFrameNumber(pThis); if ( (pThis->dqic != 0x7) && (pThis->dqic != 0)) pThis->dqic--; /* Clean up any URBs that have been removed. */ ohciR3CancelOrphanedURBs(pDevIns, pThis, pThisCC); /* Start the next frame. */ ohciR3StartOfFrame(pDevIns, pThis, pThisCC); } # ifdef VBOX_WITH_OHCI_PHYS_READ_STATS physReadStatsPrint(&g_PhysReadState); # endif ohciR3Unlock(pThisCC); return pThis->fIdle; } /** * @interface_method_impl{VUSBIROOTHUBPORT,pfnFrameRateChanged} */ static DECLCALLBACK(void) ohciR3FrameRateChanged(PVUSBIROOTHUBPORT pInterface, uint32_t u32FrameRate) { POHCICC pThisCC = VUSBIROOTHUBPORT_2_OHCI(pInterface); PPDMDEVINS pDevIns = pThisCC->pDevInsR3; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); Assert(u32FrameRate <= OHCI_DEFAULT_TIMER_FREQ); pThis->cTicksPerFrame = pThis->u64TimerHz / u32FrameRate; if (!pThis->cTicksPerFrame) pThis->cTicksPerFrame = 1; pThis->cTicksPerUsbTick = pThis->u64TimerHz >= VUSB_BUS_HZ ? pThis->u64TimerHz / VUSB_BUS_HZ : 1; } /** * Start sending SOF tokens across the USB bus, lists are processed in * next frame */ static void ohciR3BusStart(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC) { pThisCC->RootHub.pIRhConn->pfnPowerOn(pThisCC->RootHub.pIRhConn); pThis->dqic = 0x7; Log(("ohci: Bus started\n")); pThis->SofTime = PDMDevHlpTMTimeVirtGet(pDevIns); int rc = pThisCC->RootHub.pIRhConn->pfnSetPeriodicFrameProcessing(pThisCC->RootHub.pIRhConn, OHCI_DEFAULT_TIMER_FREQ); AssertRC(rc); } /** * Stop sending SOF tokens on the bus */ static void ohciR3BusStop(POHCICC pThisCC) { int rc = pThisCC->RootHub.pIRhConn->pfnSetPeriodicFrameProcessing(pThisCC->RootHub.pIRhConn, 0); AssertRC(rc); pThisCC->RootHub.pIRhConn->pfnPowerOff(pThisCC->RootHub.pIRhConn); } /** * Move in to resume state */ static void ohciR3BusResume(PPDMDEVINS pDevIns, POHCI pThis, POHCICC pThisCC, bool fHardware) { pThis->ctl &= ~OHCI_CTL_HCFS; pThis->ctl |= OHCI_USB_RESUME; LogFunc(("fHardware=%RTbool RWE=%s\n", fHardware, (pThis->ctl & OHCI_CTL_RWE) ? "on" : "off")); if (fHardware && (pThis->ctl & OHCI_CTL_RWE)) ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_RESUME_DETECT); ohciR3BusStart(pDevIns, pThis, pThisCC); } /* Power a port up or down */ static void ohciR3RhPortPower(POHCIROOTHUBR3 pRh, unsigned iPort, bool fPowerUp) { POHCIHUBPORT pPort = &pRh->aPorts[iPort]; bool fOldPPS = !!(pPort->fReg & OHCI_PORT_PPS); LogFlowFunc(("iPort=%u fPowerUp=%RTbool\n", iPort, fPowerUp)); if (fPowerUp) { /* power up */ if (pPort->fAttached) pPort->fReg |= OHCI_PORT_CCS; if (pPort->fReg & OHCI_PORT_CCS) pPort->fReg |= OHCI_PORT_PPS; if (pPort->fAttached && !fOldPPS) VUSBIRhDevPowerOn(pRh->pIRhConn, OHCI_PORT_2_VUSB_PORT(iPort)); } else { /* power down */ pPort->fReg &= ~(OHCI_PORT_PPS | OHCI_PORT_CCS | OHCI_PORT_PSS | OHCI_PORT_PRS); if (pPort->fAttached && fOldPPS) VUSBIRhDevPowerOff(pRh->pIRhConn, OHCI_PORT_2_VUSB_PORT(iPort)); } } #endif /* IN_RING3 */ /** * Read the HcRevision register. */ static VBOXSTRICTRC HcRevision_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); Log2(("HcRevision_r() -> 0x10\n")); *pu32Value = 0x10; /* OHCI revision 1.0, no emulation. */ return VINF_SUCCESS; } /** * Write to the HcRevision register. */ static VBOXSTRICTRC HcRevision_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t u32Value) { RT_NOREF(pDevIns, pThis, iReg, u32Value); Log2(("HcRevision_w(%#010x) - denied\n", u32Value)); ASSERT_GUEST_MSG_FAILED(("Invalid operation!!! u32Value=%#010x\n", u32Value)); return VINF_SUCCESS; } /** * Read the HcControl register. */ static VBOXSTRICTRC HcControl_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); uint32_t ctl = pThis->ctl; Log2(("HcControl_r -> %#010x - CBSR=%d PLE=%d IE=%d CLE=%d BLE=%d HCFS=%#x IR=%d RWC=%d RWE=%d\n", ctl, ctl & 3, (ctl >> 2) & 1, (ctl >> 3) & 1, (ctl >> 4) & 1, (ctl >> 5) & 1, (ctl >> 6) & 3, (ctl >> 8) & 1, (ctl >> 9) & 1, (ctl >> 10) & 1)); *pu32Value = ctl; return VINF_SUCCESS; } /** * Write the HcControl register. */ static VBOXSTRICTRC HcControl_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(iReg); /* log it. */ uint32_t chg = pThis->ctl ^ val; NOREF(chg); Log2(("HcControl_w(%#010x) => %sCBSR=%d %sPLE=%d %sIE=%d %sCLE=%d %sBLE=%d %sHCFS=%#x %sIR=%d %sRWC=%d %sRWE=%d\n", val, chg & 3 ? "*" : "", val & 3, chg & RT_BIT(2) ? "*" : "", (val >> 2) & 1, chg & RT_BIT(3) ? "*" : "", (val >> 3) & 1, chg & RT_BIT(4) ? "*" : "", (val >> 4) & 1, chg & RT_BIT(5) ? "*" : "", (val >> 5) & 1, chg & (3 << 6)? "*" : "", (val >> 6) & 3, chg & RT_BIT(8) ? "*" : "", (val >> 8) & 1, chg & RT_BIT(9) ? "*" : "", (val >> 9) & 1, chg & RT_BIT(10) ? "*" : "", (val >> 10) & 1)); if (val & ~0x07ff) Log2(("Unknown bits %#x are set!!!\n", val & ~0x07ff)); /* see what changed and take action on that. */ uint32_t old_state = pThis->ctl & OHCI_CTL_HCFS; uint32_t new_state = val & OHCI_CTL_HCFS; #ifdef IN_RING3 pThis->ctl = val; if (new_state != old_state) { POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); switch (new_state) { case OHCI_USB_OPERATIONAL: LogRel(("OHCI: USB Operational\n")); ohciR3BusStart(pDevIns, pThis, pThisCC); break; case OHCI_USB_SUSPEND: ohciR3BusStop(pThisCC); LogRel(("OHCI: USB Suspended\n")); break; case OHCI_USB_RESUME: LogRel(("OHCI: USB Resume\n")); ohciR3BusResume(pDevIns, pThis, pThisCC, false /* not hardware */); break; case OHCI_USB_RESET: { LogRel(("OHCI: USB Reset\n")); ohciR3BusStop(pThisCC); /** @todo This should probably do a real reset, but we don't implement * that correctly in the roothub reset callback yet. check it's * comments and argument for more details. */ pThisCC->RootHub.pIRhConn->pfnReset(pThisCC->RootHub.pIRhConn, false /* don't do a real reset */); break; } } } #else /* !IN_RING3 */ RT_NOREF(pDevIns); if ( new_state != old_state ) { Log2(("HcControl_w: state changed -> VINF_IOM_R3_MMIO_WRITE\n")); return VINF_IOM_R3_MMIO_WRITE; } pThis->ctl = val; #endif /* !IN_RING3 */ return VINF_SUCCESS; } /** * Read the HcCommandStatus register. */ static VBOXSTRICTRC HcCommandStatus_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { uint32_t status = pThis->status; Log2(("HcCommandStatus_r() -> %#010x - HCR=%d CLF=%d BLF=%d OCR=%d SOC=%d\n", status, status & 1, (status >> 1) & 1, (status >> 2) & 1, (status >> 3) & 1, (status >> 16) & 3)); *pu32Value = status; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcCommandStatus register. */ static VBOXSTRICTRC HcCommandStatus_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, iReg); /* log */ uint32_t chg = pThis->status ^ val; NOREF(chg); Log2(("HcCommandStatus_w(%#010x) => %sHCR=%d %sCLF=%d %sBLF=%d %sOCR=%d %sSOC=%d\n", val, chg & RT_BIT(0) ? "*" : "", val & 1, chg & RT_BIT(1) ? "*" : "", (val >> 1) & 1, chg & RT_BIT(2) ? "*" : "", (val >> 2) & 1, chg & RT_BIT(3) ? "*" : "", (val >> 3) & 1, chg & (3<<16)? "!!!":"", (pThis->status >> 16) & 3)); if (val & ~0x0003000f) Log2(("Unknown bits %#x are set!!!\n", val & ~0x0003000f)); /* SOC is read-only */ val = (val & ~OHCI_STATUS_SOC); #ifdef IN_RING3 /* "bits written as '0' remain unchanged in the register" */ pThis->status |= val; if (pThis->status & OHCI_STATUS_HCR) { LogRel(("OHCI: Software reset\n")); ohciR3DoReset(pDevIns, pThis, PDMDEVINS_2_DATA_CC(pDevIns, POHCICC), OHCI_USB_SUSPEND, false /* N/A */); } #else if ((pThis->status | val) & OHCI_STATUS_HCR) { LogFlow(("HcCommandStatus_w: reset -> VINF_IOM_R3_MMIO_WRITE\n")); return VINF_IOM_R3_MMIO_WRITE; } pThis->status |= val; #endif return VINF_SUCCESS; } /** * Read the HcInterruptStatus register. */ static VBOXSTRICTRC HcInterruptStatus_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { uint32_t val = pThis->intr_status; Log2(("HcInterruptStatus_r() -> %#010x - SO=%d WDH=%d SF=%d RD=%d UE=%d FNO=%d RHSC=%d OC=%d\n", val, val & 1, (val >> 1) & 1, (val >> 2) & 1, (val >> 3) & 1, (val >> 4) & 1, (val >> 5) & 1, (val >> 6) & 1, (val >> 30) & 1)); *pu32Value = val; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcInterruptStatus register. */ static VBOXSTRICTRC HcInterruptStatus_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(iReg); uint32_t res = pThis->intr_status & ~val; uint32_t chg = pThis->intr_status ^ res; NOREF(chg); int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CsIrq, VINF_IOM_R3_MMIO_WRITE); if (rc != VINF_SUCCESS) return rc; Log2(("HcInterruptStatus_w(%#010x) => %sSO=%d %sWDH=%d %sSF=%d %sRD=%d %sUE=%d %sFNO=%d %sRHSC=%d %sOC=%d\n", val, chg & RT_BIT(0) ? "*" : "", res & 1, chg & RT_BIT(1) ? "*" : "", (res >> 1) & 1, chg & RT_BIT(2) ? "*" : "", (res >> 2) & 1, chg & RT_BIT(3) ? "*" : "", (res >> 3) & 1, chg & RT_BIT(4) ? "*" : "", (res >> 4) & 1, chg & RT_BIT(5) ? "*" : "", (res >> 5) & 1, chg & RT_BIT(6) ? "*" : "", (res >> 6) & 1, chg & RT_BIT(30)? "*" : "", (res >> 30) & 1)); if ( (val & ~0xc000007f) && val != 0xffffffff /* ignore clear-all-like requests from xp. */) Log2(("Unknown bits %#x are set!!!\n", val & ~0xc000007f)); /* "The Host Controller Driver may clear specific bits in this * register by writing '1' to bit positions to be cleared" */ pThis->intr_status &= ~val; ohciUpdateInterruptLocked(pDevIns, pThis, "HcInterruptStatus_w"); PDMDevHlpCritSectLeave(pDevIns, &pThis->CsIrq); return VINF_SUCCESS; } /** * Read the HcInterruptEnable register */ static VBOXSTRICTRC HcInterruptEnable_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { uint32_t val = pThis->intr; Log2(("HcInterruptEnable_r() -> %#010x - SO=%d WDH=%d SF=%d RD=%d UE=%d FNO=%d RHSC=%d OC=%d MIE=%d\n", val, val & 1, (val >> 1) & 1, (val >> 2) & 1, (val >> 3) & 1, (val >> 4) & 1, (val >> 5) & 1, (val >> 6) & 1, (val >> 30) & 1, (val >> 31) & 1)); *pu32Value = val; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Writes to the HcInterruptEnable register. */ static VBOXSTRICTRC HcInterruptEnable_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(iReg); uint32_t res = pThis->intr | val; uint32_t chg = pThis->intr ^ res; NOREF(chg); int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CsIrq, VINF_IOM_R3_MMIO_WRITE); if (rc != VINF_SUCCESS) return rc; Log2(("HcInterruptEnable_w(%#010x) => %sSO=%d %sWDH=%d %sSF=%d %sRD=%d %sUE=%d %sFNO=%d %sRHSC=%d %sOC=%d %sMIE=%d\n", val, chg & RT_BIT(0) ? "*" : "", res & 1, chg & RT_BIT(1) ? "*" : "", (res >> 1) & 1, chg & RT_BIT(2) ? "*" : "", (res >> 2) & 1, chg & RT_BIT(3) ? "*" : "", (res >> 3) & 1, chg & RT_BIT(4) ? "*" : "", (res >> 4) & 1, chg & RT_BIT(5) ? "*" : "", (res >> 5) & 1, chg & RT_BIT(6) ? "*" : "", (res >> 6) & 1, chg & RT_BIT(30) ? "*" : "", (res >> 30) & 1, chg & RT_BIT(31) ? "*" : "", (res >> 31) & 1)); if (val & ~0xc000007f) Log2(("Uknown bits %#x are set!!!\n", val & ~0xc000007f)); pThis->intr |= val; ohciUpdateInterruptLocked(pDevIns, pThis, "HcInterruptEnable_w"); PDMDevHlpCritSectLeave(pDevIns, &pThis->CsIrq); return VINF_SUCCESS; } /** * Reads the HcInterruptDisable register. */ static VBOXSTRICTRC HcInterruptDisable_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { #if 1 /** @todo r=bird: "On read, the current value of the HcInterruptEnable register is returned." */ uint32_t val = pThis->intr; #else /* old code. */ uint32_t val = ~pThis->intr; #endif Log2(("HcInterruptDisable_r() -> %#010x - SO=%d WDH=%d SF=%d RD=%d UE=%d FNO=%d RHSC=%d OC=%d MIE=%d\n", val, val & 1, (val >> 1) & 1, (val >> 2) & 1, (val >> 3) & 1, (val >> 4) & 1, (val >> 5) & 1, (val >> 6) & 1, (val >> 30) & 1, (val >> 31) & 1)); *pu32Value = val; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Writes to the HcInterruptDisable register. */ static VBOXSTRICTRC HcInterruptDisable_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(iReg); uint32_t res = pThis->intr & ~val; uint32_t chg = pThis->intr ^ res; NOREF(chg); int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CsIrq, VINF_IOM_R3_MMIO_WRITE); if (rc != VINF_SUCCESS) return rc; Log2(("HcInterruptDisable_w(%#010x) => %sSO=%d %sWDH=%d %sSF=%d %sRD=%d %sUE=%d %sFNO=%d %sRHSC=%d %sOC=%d %sMIE=%d\n", val, chg & RT_BIT(0) ? "*" : "", res & 1, chg & RT_BIT(1) ? "*" : "", (res >> 1) & 1, chg & RT_BIT(2) ? "*" : "", (res >> 2) & 1, chg & RT_BIT(3) ? "*" : "", (res >> 3) & 1, chg & RT_BIT(4) ? "*" : "", (res >> 4) & 1, chg & RT_BIT(5) ? "*" : "", (res >> 5) & 1, chg & RT_BIT(6) ? "*" : "", (res >> 6) & 1, chg & RT_BIT(30) ? "*" : "", (res >> 30) & 1, chg & RT_BIT(31) ? "*" : "", (res >> 31) & 1)); /* Don't bitch about invalid bits here since it makes sense to disable * interrupts you don't know about. */ pThis->intr &= ~val; ohciUpdateInterruptLocked(pDevIns, pThis, "HcInterruptDisable_w"); PDMDevHlpCritSectLeave(pDevIns, &pThis->CsIrq); return VINF_SUCCESS; } /** * Read the HcHCCA register (Host Controller Communications Area physical address). */ static VBOXSTRICTRC HcHCCA_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { Log2(("HcHCCA_r() -> %#010x\n", pThis->hcca)); *pu32Value = pThis->hcca; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcHCCA register (Host Controller Communications Area physical address). */ static VBOXSTRICTRC HcHCCA_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t Value) { Log2(("HcHCCA_w(%#010x) - old=%#010x new=%#010x\n", Value, pThis->hcca, Value & OHCI_HCCA_MASK)); pThis->hcca = Value & OHCI_HCCA_MASK; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Read the HcPeriodCurrentED register. */ static VBOXSTRICTRC HcPeriodCurrentED_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { Log2(("HcPeriodCurrentED_r() -> %#010x\n", pThis->per_cur)); *pu32Value = pThis->per_cur; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcPeriodCurrentED register. */ static VBOXSTRICTRC HcPeriodCurrentED_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { Log(("HcPeriodCurrentED_w(%#010x) - old=%#010x new=%#010x (This is a read only register, only the linux guys don't respect that!)\n", val, pThis->per_cur, val & ~7)); //AssertMsgFailed(("HCD (Host Controller Driver) should not write to HcPeriodCurrentED! val=%#010x (old=%#010x)\n", val, pThis->per_cur)); AssertMsg(!(val & 7), ("Invalid alignment, val=%#010x\n", val)); pThis->per_cur = val & ~7; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Read the HcControlHeadED register. */ static VBOXSTRICTRC HcControlHeadED_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { Log2(("HcControlHeadED_r() -> %#010x\n", pThis->ctrl_head)); *pu32Value = pThis->ctrl_head; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcControlHeadED register. */ static VBOXSTRICTRC HcControlHeadED_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { Log2(("HcControlHeadED_w(%#010x) - old=%#010x new=%#010x\n", val, pThis->ctrl_head, val & ~7)); AssertMsg(!(val & 7), ("Invalid alignment, val=%#010x\n", val)); pThis->ctrl_head = val & ~7; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Read the HcControlCurrentED register. */ static VBOXSTRICTRC HcControlCurrentED_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { Log2(("HcControlCurrentED_r() -> %#010x\n", pThis->ctrl_cur)); *pu32Value = pThis->ctrl_cur; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcControlCurrentED register. */ static VBOXSTRICTRC HcControlCurrentED_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { Log2(("HcControlCurrentED_w(%#010x) - old=%#010x new=%#010x\n", val, pThis->ctrl_cur, val & ~7)); AssertMsg(!(pThis->ctl & OHCI_CTL_CLE), ("Illegal write! HcControl.ControlListEnabled is set! val=%#010x\n", val)); AssertMsg(!(val & 7), ("Invalid alignment, val=%#010x\n", val)); pThis->ctrl_cur = val & ~7; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Read the HcBulkHeadED register. */ static VBOXSTRICTRC HcBulkHeadED_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { Log2(("HcBulkHeadED_r() -> %#010x\n", pThis->bulk_head)); *pu32Value = pThis->bulk_head; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcBulkHeadED register. */ static VBOXSTRICTRC HcBulkHeadED_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { Log2(("HcBulkHeadED_w(%#010x) - old=%#010x new=%#010x\n", val, pThis->bulk_head, val & ~7)); AssertMsg(!(val & 7), ("Invalid alignment, val=%#010x\n", val)); pThis->bulk_head = val & ~7; /** @todo The ATI OHCI controller on my machine enforces 16-byte address alignment. */ RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Read the HcBulkCurrentED register. */ static VBOXSTRICTRC HcBulkCurrentED_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { Log2(("HcBulkCurrentED_r() -> %#010x\n", pThis->bulk_cur)); *pu32Value = pThis->bulk_cur; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcBulkCurrentED register. */ static VBOXSTRICTRC HcBulkCurrentED_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { Log2(("HcBulkCurrentED_w(%#010x) - old=%#010x new=%#010x\n", val, pThis->bulk_cur, val & ~7)); AssertMsg(!(pThis->ctl & OHCI_CTL_BLE), ("Illegal write! HcControl.BulkListEnabled is set! val=%#010x\n", val)); AssertMsg(!(val & 7), ("Invalid alignment, val=%#010x\n", val)); pThis->bulk_cur = val & ~7; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Read the HcDoneHead register. */ static VBOXSTRICTRC HcDoneHead_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { Log2(("HcDoneHead_r() -> 0x%#08x\n", pThis->done)); *pu32Value = pThis->done; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcDoneHead register. */ static VBOXSTRICTRC HcDoneHead_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, pThis, iReg, val); Log2(("HcDoneHead_w(0x%#08x) - denied!!!\n", val)); /*AssertMsgFailed(("Illegal operation!!! val=%#010x\n", val)); - OS/2 does this */ return VINF_SUCCESS; } /** * Read the HcFmInterval (Fm=Frame) register. */ static VBOXSTRICTRC HcFmInterval_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { uint32_t val = (pThis->fit << 31) | (pThis->fsmps << 16) | (pThis->fi); Log2(("HcFmInterval_r() -> 0x%#08x - FI=%d FSMPS=%d FIT=%d\n", val, val & 0x3fff, (val >> 16) & 0x7fff, val >> 31)); *pu32Value = val; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcFmInterval (Fm = Frame) register. */ static VBOXSTRICTRC HcFmInterval_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, iReg); /* log */ uint32_t chg = val ^ ((pThis->fit << 31) | (pThis->fsmps << 16) | pThis->fi); NOREF(chg); Log2(("HcFmInterval_w(%#010x) => %sFI=%d %sFSMPS=%d %sFIT=%d\n", val, chg & 0x00003fff ? "*" : "", val & 0x3fff, chg & 0x7fff0000 ? "*" : "", (val >> 16) & 0x7fff, chg >> 31 ? "*" : "", (val >> 31) & 1)); if (pThis->fi != (val & OHCI_FMI_FI)) { Log(("ohci: FrameInterval: %#010x -> %#010x\n", pThis->fi, val & OHCI_FMI_FI)); AssertMsg(pThis->fit != ((val >> OHCI_FMI_FIT_SHIFT) & 1), ("HCD didn't toggle the FIT bit!!!\n")); } /* update */ pThis->fi = val & OHCI_FMI_FI; pThis->fit = (val & OHCI_FMI_FIT) >> OHCI_FMI_FIT_SHIFT; pThis->fsmps = (val & OHCI_FMI_FSMPS) >> OHCI_FMI_FSMPS_SHIFT; return VINF_SUCCESS; } /** * Read the HcFmRemaining (Fm = Frame) register. */ static VBOXSTRICTRC HcFmRemaining_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(iReg); uint32_t Value = pThis->frt << 31; if ((pThis->ctl & OHCI_CTL_HCFS) == OHCI_USB_OPERATIONAL) { /* * Being in USB operational state guarantees SofTime was set already. */ uint64_t tks = PDMDevHlpTMTimeVirtGet(pDevIns) - pThis->SofTime; if (tks < pThis->cTicksPerFrame) /* avoid muldiv if possible */ { uint16_t fr; tks = ASMMultU64ByU32DivByU32(1, tks, pThis->cTicksPerUsbTick); fr = (uint16_t)(pThis->fi - tks); Value |= fr; } } Log2(("HcFmRemaining_r() -> %#010x - FR=%d FRT=%d\n", Value, Value & 0x3fff, Value >> 31)); *pu32Value = Value; return VINF_SUCCESS; } /** * Write to the HcFmRemaining (Fm = Frame) register. */ static VBOXSTRICTRC HcFmRemaining_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, pThis, iReg, val); Log2(("HcFmRemaining_w(%#010x) - denied\n", val)); AssertMsgFailed(("Invalid operation!!! val=%#010x\n", val)); return VINF_SUCCESS; } /** * Read the HcFmNumber (Fm = Frame) register. */ static VBOXSTRICTRC HcFmNumber_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); uint32_t val = (uint16_t)pThis->HcFmNumber; Log2(("HcFmNumber_r() -> %#010x - FN=%#x(%d) (32-bit=%#x(%d))\n", val, val, val, pThis->HcFmNumber, pThis->HcFmNumber)); *pu32Value = val; return VINF_SUCCESS; } /** * Write to the HcFmNumber (Fm = Frame) register. */ static VBOXSTRICTRC HcFmNumber_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, pThis, iReg, val); Log2(("HcFmNumber_w(%#010x) - denied\n", val)); AssertMsgFailed(("Invalid operation!!! val=%#010x\n", val)); return VINF_SUCCESS; } /** * Read the HcPeriodicStart register. * The register determines when in a frame to switch from control&bulk to periodic lists. */ static VBOXSTRICTRC HcPeriodicStart_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); Log2(("HcPeriodicStart_r() -> %#010x - PS=%d\n", pThis->pstart, pThis->pstart & 0x3fff)); *pu32Value = pThis->pstart; return VINF_SUCCESS; } /** * Write to the HcPeriodicStart register. * The register determines when in a frame to switch from control&bulk to periodic lists. */ static VBOXSTRICTRC HcPeriodicStart_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, iReg); Log2(("HcPeriodicStart_w(%#010x) => PS=%d\n", val, val & 0x3fff)); if (val & ~0x3fff) Log2(("Unknown bits %#x are set!!!\n", val & ~0x3fff)); pThis->pstart = val; /** @todo r=bird: should we support setting the other bits? */ return VINF_SUCCESS; } /** * Read the HcLSThreshold register. */ static VBOXSTRICTRC HcLSThreshold_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, pThis, iReg); Log2(("HcLSThreshold_r() -> %#010x\n", OHCI_LS_THRESH)); *pu32Value = OHCI_LS_THRESH; return VINF_SUCCESS; } /** * Write to the HcLSThreshold register. * * Docs are inconsistent here: * * "Neither the Host Controller nor the Host Controller Driver are allowed to change this value." * * "This value is calculated by HCD with the consideration of transmission and setup overhead." * * The register is marked "R/W" the HCD column. * */ static VBOXSTRICTRC HcLSThreshold_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, pThis, iReg, val); Log2(("HcLSThreshold_w(%#010x) => LST=0x%03x(%d)\n", val, val & 0x0fff, val & 0x0fff)); AssertMsg(val == OHCI_LS_THRESH, ("HCD tried to write bad LS threshold: 0x%x (see function header)\n", val)); /** @todo the HCD can change this. */ return VINF_SUCCESS; } /** * Read the HcRhDescriptorA register. */ static VBOXSTRICTRC HcRhDescriptorA_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { RT_NOREF(pDevIns, iReg); uint32_t val = pThis->RootHub.desc_a; #if 0 /* annoying */ Log2(("HcRhDescriptorA_r() -> %#010x - NDP=%d PSM=%d NPS=%d DT=%d OCPM=%d NOCP=%d POTGT=%#x\n", val, val & 0xff, (val >> 8) & 1, (val >> 9) & 1, (val >> 10) & 1, (val >> 11) & 1, (val >> 12) & 1, (val >> 24) & 0xff)); #endif *pu32Value = val; return VINF_SUCCESS; } /** * Write to the HcRhDescriptorA register. */ static VBOXSTRICTRC HcRhDescriptorA_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, iReg); uint32_t chg = val ^ pThis->RootHub.desc_a; NOREF(chg); Log2(("HcRhDescriptorA_w(%#010x) => %sNDP=%d %sPSM=%d %sNPS=%d %sDT=%d %sOCPM=%d %sNOCP=%d %sPOTGT=%#x - %sPowerSwitching Set%sPower\n", val, chg & 0xff ?"!!!": "", val & 0xff, (chg >> 8) & 1 ? "*" : "", (val >> 8) & 1, (chg >> 9) & 1 ? "*" : "", (val >> 9) & 1, (chg >> 10) & 1 ?"!!!": "", 0, (chg >> 11) & 1 ? "*" : "", (val >> 11) & 1, (chg >> 12) & 1 ? "*" : "", (val >> 12) & 1, (chg >> 24)&0xff? "*" : "", (val >> 24) & 0xff, val & OHCI_RHA_NPS ? "No" : "", val & OHCI_RHA_PSM ? "Port" : "Global")); if (val & ~0xff001fff) Log2(("Unknown bits %#x are set!!!\n", val & ~0xff001fff)); if ((val & (OHCI_RHA_NDP | OHCI_RHA_DT)) != OHCI_NDP_CFG(pThis)) { Log(("ohci: invalid write to NDP or DT in roothub descriptor A!!! val=0x%.8x\n", val)); val &= ~(OHCI_RHA_NDP | OHCI_RHA_DT); val |= OHCI_NDP_CFG(pThis); } pThis->RootHub.desc_a = val; return VINF_SUCCESS; } /** * Read the HcRhDescriptorB register. */ static VBOXSTRICTRC HcRhDescriptorB_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { uint32_t val = pThis->RootHub.desc_b; Log2(("HcRhDescriptorB_r() -> %#010x - DR=0x%04x PPCM=0x%04x\n", val, val & 0xffff, val >> 16)); *pu32Value = val; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcRhDescriptorB register. */ static VBOXSTRICTRC HcRhDescriptorB_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { RT_NOREF(pDevIns, iReg); uint32_t chg = pThis->RootHub.desc_b ^ val; NOREF(chg); Log2(("HcRhDescriptorB_w(%#010x) => %sDR=0x%04x %sPPCM=0x%04x\n", val, chg & 0xffff ? "!!!" : "", val & 0xffff, chg >> 16 ? "!!!" : "", val >> 16)); if ( pThis->RootHub.desc_b != val ) Log(("ohci: unsupported write to root descriptor B!!! 0x%.8x -> 0x%.8x\n", pThis->RootHub.desc_b, val)); pThis->RootHub.desc_b = val; return VINF_SUCCESS; } /** * Read the HcRhStatus (Rh = Root Hub) register. */ static VBOXSTRICTRC HcRhStatus_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { uint32_t val = pThis->RootHub.status; if (val & (OHCI_RHS_LPSC | OHCI_RHS_OCIC)) Log2(("HcRhStatus_r() -> %#010x - LPS=%d OCI=%d DRWE=%d LPSC=%d OCIC=%d CRWE=%d\n", val, val & 1, (val >> 1) & 1, (val >> 15) & 1, (val >> 16) & 1, (val >> 17) & 1, (val >> 31) & 1)); *pu32Value = val; RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; } /** * Write to the HcRhStatus (Rh = Root Hub) register. */ static VBOXSTRICTRC HcRhStatus_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { #ifdef IN_RING3 POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); /* log */ uint32_t old = pThis->RootHub.status; uint32_t chg; if (val & ~0x80038003) Log2(("HcRhStatus_w: Unknown bits %#x are set!!!\n", val & ~0x80038003)); if ( (val & OHCI_RHS_LPSC) && (val & OHCI_RHS_LPS) ) Log2(("HcRhStatus_w: Warning both CGP and SGP are set! (Clear/Set Global Power)\n")); if ( (val & OHCI_RHS_DRWE) && (val & OHCI_RHS_CRWE) ) Log2(("HcRhStatus_w: Warning both CRWE and SRWE are set! (Clear/Set Remote Wakeup Enable)\n")); /* write 1 to clear OCIC */ if ( val & OHCI_RHS_OCIC ) pThis->RootHub.status &= ~OHCI_RHS_OCIC; /* SetGlobalPower */ if ( val & OHCI_RHS_LPSC ) { unsigned i; Log2(("ohci: global power up\n")); for (i = 0; i < OHCI_NDP_CFG(pThis); i++) ohciR3RhPortPower(&pThisCC->RootHub, i, true /* power up */); } /* ClearGlobalPower */ if ( val & OHCI_RHS_LPS ) { unsigned i; Log2(("ohci: global power down\n")); for (i = 0; i < OHCI_NDP_CFG(pThis); i++) ohciR3RhPortPower(&pThisCC->RootHub, i, false /* power down */); } if ( val & OHCI_RHS_DRWE ) pThis->RootHub.status |= OHCI_RHS_DRWE; if ( val & OHCI_RHS_CRWE ) pThis->RootHub.status &= ~OHCI_RHS_DRWE; chg = pThis->RootHub.status ^ old; Log2(("HcRhStatus_w(%#010x) => %sCGP=%d %sOCI=%d %sSRWE=%d %sSGP=%d %sOCIC=%d %sCRWE=%d\n", val, chg & 1 ? "*" : "", val & 1, (chg >> 1) & 1 ?"!!!": "", (val >> 1) & 1, (chg >> 15) & 1 ? "*" : "", (val >> 15) & 1, (chg >> 16) & 1 ? "*" : "", (val >> 16) & 1, (chg >> 17) & 1 ? "*" : "", (val >> 17) & 1, (chg >> 31) & 1 ? "*" : "", (val >> 31) & 1)); RT_NOREF(pDevIns, iReg); return VINF_SUCCESS; #else /* !IN_RING3 */ RT_NOREF(pDevIns, pThis, iReg, val); return VINF_IOM_R3_MMIO_WRITE; #endif /* !IN_RING3 */ } /** * Read the HcRhPortStatus register of a port. */ static VBOXSTRICTRC HcRhPortStatus_r(PPDMDEVINS pDevIns, PCOHCI pThis, uint32_t iReg, uint32_t *pu32Value) { const unsigned i = iReg - 21; uint32_t val = pThis->RootHub.aPorts[i].fReg | OHCI_PORT_PPS; /* PortPowerStatus: see todo on power in _w function. */ if (val & OHCI_PORT_PRS) { #ifdef IN_RING3 RTThreadYield(); #else Log2(("HcRhPortStatus_r: yield -> VINF_IOM_R3_MMIO_READ\n")); return VINF_IOM_R3_MMIO_READ; #endif } if (val & (OHCI_PORT_PRS | OHCI_PORT_CLEAR_CHANGE_MASK)) Log2(("HcRhPortStatus_r(): port %u: -> %#010x - CCS=%d PES=%d PSS=%d POCI=%d RRS=%d PPS=%d LSDA=%d CSC=%d PESC=%d PSSC=%d OCIC=%d PRSC=%d\n", i, val, val & 1, (val >> 1) & 1, (val >> 2) & 1, (val >> 3) & 1, (val >> 4) & 1, (val >> 8) & 1, (val >> 9) & 1, (val >> 16) & 1, (val >> 17) & 1, (val >> 18) & 1, (val >> 19) & 1, (val >> 20) & 1)); *pu32Value = val; RT_NOREF(pDevIns); return VINF_SUCCESS; } #ifdef IN_RING3 /** * Completion callback for the vusb_dev_reset() operation. * @thread EMT. */ static DECLCALLBACK(void) ohciR3PortResetDone(PVUSBIDEVICE pDev, uint32_t uPort, int rc, void *pvUser) { RT_NOREF(pDev); Assert(uPort >= 1); PPDMDEVINS pDevIns = (PPDMDEVINS)pvUser; POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); POHCIHUBPORT pPort = &pThis->RootHub.aPorts[uPort - 1]; if (RT_SUCCESS(rc)) { /* * Successful reset. */ Log2(("ohciR3PortResetDone: Reset completed.\n")); pPort->fReg &= ~(OHCI_PORT_PRS | OHCI_PORT_PSS | OHCI_PORT_PSSC); pPort->fReg |= OHCI_PORT_PES | OHCI_PORT_PRSC; } else { /* desperate measures. */ if ( pPort->fAttached && VUSBIRhDevGetState(pThisCC->RootHub.pIRhConn, uPort) == VUSB_DEVICE_STATE_ATTACHED) { /* * Damn, something weird happened during reset. We'll pretend the user did an * incredible fast reconnect or something. (probably not gonna work) */ Log2(("ohciR3PortResetDone: The reset failed (rc=%Rrc)!!! Pretending reconnect at the speed of light.\n", rc)); pPort->fReg = OHCI_PORT_CCS | OHCI_PORT_CSC; } else { /* * The device have / will be disconnected. */ Log2(("ohciR3PortResetDone: Disconnected (rc=%Rrc)!!!\n", rc)); pPort->fReg &= ~(OHCI_PORT_PRS | OHCI_PORT_PSS | OHCI_PORT_PSSC | OHCI_PORT_PRSC); pPort->fReg |= OHCI_PORT_CSC; } } /* Raise roothub status change interrupt. */ ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_ROOT_HUB_STATUS_CHANGE); } /** * Sets a flag in a port status register but only set it if a device is * connected, if not set ConnectStatusChange flag to force HCD to reevaluate * connect status. * * @returns true if device was connected and the flag was cleared. */ static bool ohciR3RhPortSetIfConnected(PPDMDEVINS pDevIns, POHCI pThis, int iPort, uint32_t fValue) { /* * Writing a 0 has no effect */ if (fValue == 0) return false; /* * If CurrentConnectStatus is cleared we set ConnectStatusChange. */ if (!(pThis->RootHub.aPorts[iPort].fReg & OHCI_PORT_CCS)) { pThis->RootHub.aPorts[iPort].fReg |= OHCI_PORT_CSC; ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_ROOT_HUB_STATUS_CHANGE); return false; } bool fRc = !(pThis->RootHub.aPorts[iPort].fReg & fValue); /* set the bit */ pThis->RootHub.aPorts[iPort].fReg |= fValue; return fRc; } #endif /* IN_RING3 */ /** * Write to the HcRhPortStatus register of a port. */ static VBOXSTRICTRC HcRhPortStatus_w(PPDMDEVINS pDevIns, POHCI pThis, uint32_t iReg, uint32_t val) { #ifdef IN_RING3 const unsigned i = iReg - 21; POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); POHCIHUBPORT p = &pThis->RootHub.aPorts[i]; uint32_t old_state = p->fReg; # ifdef LOG_ENABLED /* * Log it. */ static const char *apszCmdNames[32] = { "ClearPortEnable", "SetPortEnable", "SetPortSuspend", "!!!ClearSuspendStatus", "SetPortReset", "!!!5", "!!!6", "!!!7", "SetPortPower", "ClearPortPower", "!!!10", "!!!11", "!!!12", "!!!13", "!!!14", "!!!15", "ClearCSC", "ClearPESC", "ClearPSSC", "ClearOCIC", "ClearPRSC", "!!!21", "!!!22", "!!!23", "!!!24", "!!!25", "!!!26", "!!!27", "!!!28", "!!!29", "!!!30", "!!!31" }; Log2(("HcRhPortStatus_w(%#010x): port %u:", val, i)); for (unsigned j = 0; j < RT_ELEMENTS(apszCmdNames); j++) if (val & (1 << j)) Log2((" %s", apszCmdNames[j])); Log2(("\n")); # endif /* Write to clear any of the change bits: CSC, PESC, PSSC, OCIC and PRSC */ if (val & OHCI_PORT_CLEAR_CHANGE_MASK) p->fReg &= ~(val & OHCI_PORT_CLEAR_CHANGE_MASK); if (val & OHCI_PORT_CLRPE) { p->fReg &= ~OHCI_PORT_PES; Log2(("HcRhPortStatus_w(): port %u: DISABLE\n", i)); } if (ohciR3RhPortSetIfConnected(pDevIns, pThis, i, val & OHCI_PORT_PES)) Log2(("HcRhPortStatus_w(): port %u: ENABLE\n", i)); if (ohciR3RhPortSetIfConnected(pDevIns, pThis, i, val & OHCI_PORT_PSS)) Log2(("HcRhPortStatus_w(): port %u: SUSPEND - not implemented correctly!!!\n", i)); if (val & OHCI_PORT_PRS) { if (ohciR3RhPortSetIfConnected(pDevIns, pThis, i, val & OHCI_PORT_PRS)) { PVM pVM = PDMDevHlpGetVM(pDevIns); p->fReg &= ~OHCI_PORT_PRSC; VUSBIRhDevReset(pThisCC->RootHub.pIRhConn, OHCI_PORT_2_VUSB_PORT(i), false /* don't reset on linux */, ohciR3PortResetDone, pDevIns, pVM); } else if (p->fReg & OHCI_PORT_PRS) { /* the guest is getting impatient. */ Log2(("HcRhPortStatus_w(): port %u: Impatient guest!\n", i)); RTThreadYield(); } } if (!(pThis->RootHub.desc_a & OHCI_RHA_NPS)) { /** @todo To implement per-device power-switching * we need to check PortPowerControlMask to make * sure it isn't gang powered */ if (val & OHCI_PORT_CLRPP) ohciR3RhPortPower(&pThisCC->RootHub, i, false /* power down */); if (val & OHCI_PORT_PPS) ohciR3RhPortPower(&pThisCC->RootHub, i, true /* power up */); } /** @todo r=frank: ClearSuspendStatus. Timing? */ if (val & OHCI_PORT_CLRSS) { ohciR3RhPortPower(&pThisCC->RootHub, i, true /* power up */); pThis->RootHub.aPorts[i].fReg &= ~OHCI_PORT_PSS; pThis->RootHub.aPorts[i].fReg |= OHCI_PORT_PSSC; ohciR3SetInterrupt(pDevIns, pThis, OHCI_INTR_ROOT_HUB_STATUS_CHANGE); } if (p->fReg != old_state) { uint32_t res = p->fReg; uint32_t chg = res ^ old_state; NOREF(chg); Log2(("HcRhPortStatus_w(%#010x): port %u: => %sCCS=%d %sPES=%d %sPSS=%d %sPOCI=%d %sRRS=%d %sPPS=%d %sLSDA=%d %sCSC=%d %sPESC=%d %sPSSC=%d %sOCIC=%d %sPRSC=%d\n", val, i, chg & 1 ? "*" : "", res & 1, (chg >> 1) & 1 ? "*" : "", (res >> 1) & 1, (chg >> 2) & 1 ? "*" : "", (res >> 2) & 1, (chg >> 3) & 1 ? "*" : "", (res >> 3) & 1, (chg >> 4) & 1 ? "*" : "", (res >> 4) & 1, (chg >> 8) & 1 ? "*" : "", (res >> 8) & 1, (chg >> 9) & 1 ? "*" : "", (res >> 9) & 1, (chg >> 16) & 1 ? "*" : "", (res >> 16) & 1, (chg >> 17) & 1 ? "*" : "", (res >> 17) & 1, (chg >> 18) & 1 ? "*" : "", (res >> 18) & 1, (chg >> 19) & 1 ? "*" : "", (res >> 19) & 1, (chg >> 20) & 1 ? "*" : "", (res >> 20) & 1)); } RT_NOREF(pDevIns); return VINF_SUCCESS; #else /* !IN_RING3 */ RT_NOREF(pDevIns, pThis, iReg, val); return VINF_IOM_R3_MMIO_WRITE; #endif /* !IN_RING3 */ } /** * Register descriptor table */ static const OHCIOPREG g_aOpRegs[] = { { "HcRevision", HcRevision_r, HcRevision_w }, /* 0 */ { "HcControl", HcControl_r, HcControl_w }, /* 1 */ { "HcCommandStatus", HcCommandStatus_r, HcCommandStatus_w }, /* 2 */ { "HcInterruptStatus", HcInterruptStatus_r, HcInterruptStatus_w }, /* 3 */ { "HcInterruptEnable", HcInterruptEnable_r, HcInterruptEnable_w }, /* 4 */ { "HcInterruptDisable", HcInterruptDisable_r, HcInterruptDisable_w }, /* 5 */ { "HcHCCA", HcHCCA_r, HcHCCA_w }, /* 6 */ { "HcPeriodCurrentED", HcPeriodCurrentED_r, HcPeriodCurrentED_w }, /* 7 */ { "HcControlHeadED", HcControlHeadED_r, HcControlHeadED_w }, /* 8 */ { "HcControlCurrentED", HcControlCurrentED_r, HcControlCurrentED_w }, /* 9 */ { "HcBulkHeadED", HcBulkHeadED_r, HcBulkHeadED_w }, /* 10 */ { "HcBulkCurrentED", HcBulkCurrentED_r, HcBulkCurrentED_w }, /* 11 */ { "HcDoneHead", HcDoneHead_r, HcDoneHead_w }, /* 12 */ { "HcFmInterval", HcFmInterval_r, HcFmInterval_w }, /* 13 */ { "HcFmRemaining", HcFmRemaining_r, HcFmRemaining_w }, /* 14 */ { "HcFmNumber", HcFmNumber_r, HcFmNumber_w }, /* 15 */ { "HcPeriodicStart", HcPeriodicStart_r, HcPeriodicStart_w }, /* 16 */ { "HcLSThreshold", HcLSThreshold_r, HcLSThreshold_w }, /* 17 */ { "HcRhDescriptorA", HcRhDescriptorA_r, HcRhDescriptorA_w }, /* 18 */ { "HcRhDescriptorB", HcRhDescriptorB_r, HcRhDescriptorB_w }, /* 19 */ { "HcRhStatus", HcRhStatus_r, HcRhStatus_w }, /* 20 */ /* The number of port status register depends on the definition * of OHCI_NDP_MAX macro */ { "HcRhPortStatus[0]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 21 */ { "HcRhPortStatus[1]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 22 */ { "HcRhPortStatus[2]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 23 */ { "HcRhPortStatus[3]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 24 */ { "HcRhPortStatus[4]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 25 */ { "HcRhPortStatus[5]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 26 */ { "HcRhPortStatus[6]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 27 */ { "HcRhPortStatus[7]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 28 */ { "HcRhPortStatus[8]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 29 */ { "HcRhPortStatus[9]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 30 */ { "HcRhPortStatus[10]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 31 */ { "HcRhPortStatus[11]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 32 */ { "HcRhPortStatus[12]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 33 */ { "HcRhPortStatus[13]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 34 */ { "HcRhPortStatus[14]", HcRhPortStatus_r, HcRhPortStatus_w }, /* 35 */ }; /* Quick way to determine how many op regs are valid. Since at least one port must * be configured (and no more than 15), there will be between 22 and 36 registers. */ #define NUM_OP_REGS(pohci) (21 + OHCI_NDP_CFG(pohci)) AssertCompile(RT_ELEMENTS(g_aOpRegs) > 21); AssertCompile(RT_ELEMENTS(g_aOpRegs) <= 36); /** * @callback_method_impl{FNIOMMMIONEWREAD} */ static DECLCALLBACK(VBOXSTRICTRC) ohciMmioRead(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS off, void *pv, unsigned cb) { POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); RT_NOREF(pvUser); /* Paranoia: Assert that IOMMMIO_FLAGS_READ_DWORD works. */ AssertReturn(cb == sizeof(uint32_t), VERR_INTERNAL_ERROR_3); AssertReturn(!(off & 0x3), VERR_INTERNAL_ERROR_4); /* * Validate the register and call the read operator. */ VBOXSTRICTRC rc; const uint32_t iReg = off >> 2; if (iReg < NUM_OP_REGS(pThis)) rc = g_aOpRegs[iReg].pfnRead(pDevIns, pThis, iReg, (uint32_t *)pv); else { Log(("ohci: Trying to read register %u/%u!!!\n", iReg, NUM_OP_REGS(pThis))); rc = VINF_IOM_MMIO_UNUSED_FF; } return rc; } /** * @callback_method_impl{FNIOMMMIONEWWRITE} */ static DECLCALLBACK(VBOXSTRICTRC) ohciMmioWrite(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS off, void const *pv, unsigned cb) { POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); RT_NOREF(pvUser); /* Paranoia: Assert that IOMMMIO_FLAGS_WRITE_DWORD_ZEROED works. */ AssertReturn(cb == sizeof(uint32_t), VERR_INTERNAL_ERROR_3); AssertReturn(!(off & 0x3), VERR_INTERNAL_ERROR_4); /* * Validate the register and call the read operator. */ VBOXSTRICTRC rc; const uint32_t iReg = off >> 2; if (iReg < NUM_OP_REGS(pThis)) rc = g_aOpRegs[iReg].pfnWrite(pDevIns, pThis, iReg, *(uint32_t const *)pv); else { Log(("ohci: Trying to write to register %u/%u!!!\n", iReg, NUM_OP_REGS(pThis))); rc = VINF_SUCCESS; } return rc; } #ifdef IN_RING3 /** * Saves the state of the OHCI device. * * @returns VBox status code. * @param pDevIns The device instance. * @param pSSM The handle to save the state to. */ static DECLCALLBACK(int) ohciR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); LogFlow(("ohciR3SaveExec:\n")); int rc = pDevIns->pHlpR3->pfnSSMPutStructEx(pSSM, pThis, sizeof(*pThis), 0 /*fFlags*/, &g_aOhciFields[0], NULL); AssertRCReturn(rc, rc); /* Save the periodic frame rate so we can we can tell if the bus was started or not when restoring. */ return pDevIns->pHlpR3->pfnSSMPutU32(pSSM, VUSBIRhGetPeriodicFrameRate(pThisCC->RootHub.pIRhConn)); } /** * Loads the state of the OHCI device. * * @returns VBox status code. * @param pDevIns The device instance. * @param pSSM The handle to the saved state. * @param uVersion The data unit version number. * @param uPass The data pass. */ static DECLCALLBACK(int) ohciR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; int rc; LogFlow(("ohciR3LoadExec:\n")); Assert(uPass == SSM_PASS_FINAL); NOREF(uPass); if (uVersion >= OHCI_SAVED_STATE_VERSION_EOF_TIMER) rc = pHlp->pfnSSMGetStructEx(pSSM, pThis, sizeof(*pThis), 0 /*fFlags*/, &g_aOhciFields[0], NULL); else if (uVersion == OHCI_SAVED_STATE_VERSION_8PORTS) rc = pHlp->pfnSSMGetStructEx(pSSM, pThis, sizeof(*pThis), 0 /*fFlags*/, &g_aOhciFields8Ports[0], NULL); else AssertMsgFailedReturn(("%d\n", uVersion), VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION); AssertRCReturn(rc, rc); /* * Get the frame rate / started indicator. * * For older versions there is a timer saved here. We'll skip it and deduce * the periodic frame rate from the host controller functional state. */ if (uVersion > OHCI_SAVED_STATE_VERSION_EOF_TIMER) { rc = pHlp->pfnSSMGetU32(pSSM, &pThisCC->uRestoredPeriodicFrameRate); AssertRCReturn(rc, rc); } else { rc = pHlp->pfnSSMSkipToEndOfUnit(pSSM); AssertRCReturn(rc, rc); uint32_t fHcfs = pThis->ctl & OHCI_CTL_HCFS; switch (fHcfs) { case OHCI_USB_OPERATIONAL: case OHCI_USB_RESUME: pThisCC->uRestoredPeriodicFrameRate = OHCI_DEFAULT_TIMER_FREQ; break; default: pThisCC->uRestoredPeriodicFrameRate = 0; break; } } /** @todo could we restore the frame rate here instead of in ohciR3Resume? */ return VINF_SUCCESS; } /** * Reset notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ohciR3Reset(PPDMDEVINS pDevIns) { POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); LogFlow(("ohciR3Reset:\n")); /* * There is no distinction between cold boot, warm reboot and software reboots, * all of these are treated as cold boots. We are also doing the initialization * job of a BIOS or SMM driver. * * Important: Don't confuse UsbReset with hardware reset. Hardware reset is * just one way of getting into the UsbReset state. */ ohciR3DoReset(pDevIns, pThis, pThisCC, OHCI_USB_RESET, true /* reset devices */); } /** * Resume notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ohciR3Resume(PPDMDEVINS pDevIns) { POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); LogFlowFunc(("\n")); /* Restart the frame thread if it was active when the loaded state was saved. */ uint32_t uRestoredPeriodicFR = pThisCC->uRestoredPeriodicFrameRate; pThisCC->uRestoredPeriodicFrameRate = 0; if (uRestoredPeriodicFR) { LogFlowFunc(("Bus was active, enable periodic frame processing (rate: %u)\n", uRestoredPeriodicFR)); int rc = pThisCC->RootHub.pIRhConn->pfnSetPeriodicFrameProcessing(pThisCC->RootHub.pIRhConn, uRestoredPeriodicFR); AssertRC(rc); } } /** * Info handler, device version. Dumps OHCI control registers. * * @param pDevIns Device instance which registered the info. * @param pHlp Callback functions for doing output. * @param pszArgs Argument string. Optional and specific to the handler. */ static DECLCALLBACK(void) ohciR3InfoRegs(PPDMDEVINS pDevIns, PCDBGFINFOHLP pHlp, const char *pszArgs) { RT_NOREF(pszArgs); POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); uint32_t val, ctl, status; /* Control register */ ctl = pThis->ctl; pHlp->pfnPrintf(pHlp, "HcControl: %08x - CBSR=%d PLE=%d IE=%d CLE=%d BLE=%d HCFS=%#x IR=%d RWC=%d RWE=%d\n", ctl, ctl & 3, (ctl >> 2) & 1, (ctl >> 3) & 1, (ctl >> 4) & 1, (ctl >> 5) & 1, (ctl >> 6) & 3, (ctl >> 8) & 1, (ctl >> 9) & 1, (ctl >> 10) & 1); /* Command status register */ status = pThis->status; pHlp->pfnPrintf(pHlp, "HcCommandStatus: %08x - HCR=%d CLF=%d BLF=%d OCR=%d SOC=%d\n", status, status & 1, (status >> 1) & 1, (status >> 2) & 1, (status >> 3) & 1, (status >> 16) & 3); /* Interrupt status register */ val = pThis->intr_status; pHlp->pfnPrintf(pHlp, "HcInterruptStatus: %08x - SO=%d WDH=%d SF=%d RD=%d UE=%d FNO=%d RHSC=%d OC=%d\n", val, val & 1, (val >> 1) & 1, (val >> 2) & 1, (val >> 3) & 1, (val >> 4) & 1, (val >> 5) & 1, (val >> 6) & 1, (val >> 30) & 1); /* Interrupt enable register */ val = pThis->intr; pHlp->pfnPrintf(pHlp, "HcInterruptEnable: %08x - SO=%d WDH=%d SF=%d RD=%d UE=%d FNO=%d RHSC=%d OC=%d MIE=%d\n", val, val & 1, (val >> 1) & 1, (val >> 2) & 1, (val >> 3) & 1, (val >> 4) & 1, (val >> 5) & 1, (val >> 6) & 1, (val >> 30) & 1, (val >> 31) & 1); /* HCCA address register */ pHlp->pfnPrintf(pHlp, "HcHCCA: %08x\n", pThis->hcca); /* Current periodic ED register */ pHlp->pfnPrintf(pHlp, "HcPeriodCurrentED: %08x\n", pThis->per_cur); /* Control ED registers */ pHlp->pfnPrintf(pHlp, "HcControlHeadED: %08x\n", pThis->ctrl_head); pHlp->pfnPrintf(pHlp, "HcControlCurrentED: %08x\n", pThis->ctrl_cur); /* Bulk ED registers */ pHlp->pfnPrintf(pHlp, "HcBulkHeadED: %08x\n", pThis->bulk_head); pHlp->pfnPrintf(pHlp, "HcBulkCurrentED: %08x\n", pThis->bulk_cur); /* Done head register */ pHlp->pfnPrintf(pHlp, "HcDoneHead: %08x\n", pThis->done); /* Done head register */ pHlp->pfnPrintf(pHlp, "HcDoneHead: %08x\n", pThis->done); /* Root hub descriptor A */ val = pThis->RootHub.desc_a; pHlp->pfnPrintf(pHlp, "HcRhDescriptorA: %08x - NDP=%d PSM=%d NPS=%d DT=%d OCPM=%d NOCP=%d POTPGT=%d\n", val, (uint8_t)val, (val >> 8) & 1, (val >> 9) & 1, (val >> 10) & 1, (val >> 11) & 1, (val >> 12) & 1, (uint8_t)(val >> 24)); /* Root hub descriptor B */ val = pThis->RootHub.desc_b; pHlp->pfnPrintf(pHlp, "HcRhDescriptorB: %08x - DR=%#04x PPCM=%#04x\n", val, (uint16_t)val, (uint16_t)(val >> 16)); /* Root hub status register */ val = pThis->RootHub.status; pHlp->pfnPrintf(pHlp, "HcRhStatus: %08x - LPS=%d OCI=%d DRWE=%d LPSC=%d OCIC=%d CRWE=%d\n\n", val, val & 1, (val >> 1) & 1, (val >> 15) & 1, (val >> 16) & 1, (val >> 17) & 1, (val >> 31) & 1); /* Port status registers */ for (unsigned i = 0; i < OHCI_NDP_CFG(pThis); ++i) { val = pThis->RootHub.aPorts[i].fReg; pHlp->pfnPrintf(pHlp, "HcRhPortStatus%02d: CCS=%d PES =%d PSS =%d POCI=%d PRS =%d PPS=%d LSDA=%d\n" " %08x - CSC=%d PESC=%d PSSC=%d OCIC=%d PRSC=%d\n", i, val & 1, (val >> 1) & 1, (val >> 2) & 1,(val >> 3) & 1, (val >> 4) & 1, (val >> 8) & 1, (val >> 9) & 1, val, (val >> 16) & 1, (val >> 17) & 1, (val >> 18) & 1, (val >> 19) & 1, (val >> 20) & 1); } } /** * Destruct a device instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @returns VBox status code. * @param pDevIns The device instance data. */ static DECLCALLBACK(int) ohciR3Destruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); POHCICC pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCICC); if (RTCritSectIsInitialized(&pThisCC->CritSect)) RTCritSectDelete(&pThisCC->CritSect); PDMDevHlpCritSectDelete(pDevIns, &pThis->CsIrq); /* * Tear down the per endpoint in-flight tracking... */ return VINF_SUCCESS; } /** * @interface_method_impl{PDMDEVREG,pfnConstruct,OHCI constructor} */ static DECLCALLBACK(int) ohciR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); POHCIR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, POHCIR3); /* * Init instance data. */ pThisCC->pDevInsR3 = pDevIns; PPDMPCIDEV pPciDev = pDevIns->apPciDevs[0]; PDMPCIDEV_ASSERT_VALID(pDevIns, pPciDev); PDMPciDevSetVendorId(pPciDev, 0x106b); PDMPciDevSetDeviceId(pPciDev, 0x003f); PDMPciDevSetClassProg(pPciDev, 0x10); /* OHCI */ PDMPciDevSetClassSub(pPciDev, 0x03); PDMPciDevSetClassBase(pPciDev, 0x0c); PDMPciDevSetInterruptPin(pPciDev, 0x01); #ifdef VBOX_WITH_MSI_DEVICES PDMPciDevSetStatus(pPciDev, VBOX_PCI_STATUS_CAP_LIST); PDMPciDevSetCapabilityList(pPciDev, 0x80); #endif pThisCC->RootHub.pOhci = pThis; pThisCC->RootHub.IBase.pfnQueryInterface = ohciR3RhQueryInterface; pThisCC->RootHub.IRhPort.pfnGetAvailablePorts = ohciR3RhGetAvailablePorts; pThisCC->RootHub.IRhPort.pfnGetUSBVersions = ohciR3RhGetUSBVersions; pThisCC->RootHub.IRhPort.pfnAttach = ohciR3RhAttach; pThisCC->RootHub.IRhPort.pfnDetach = ohciR3RhDetach; pThisCC->RootHub.IRhPort.pfnReset = ohciR3RhReset; pThisCC->RootHub.IRhPort.pfnXferCompletion = ohciR3RhXferCompletion; pThisCC->RootHub.IRhPort.pfnXferError = ohciR3RhXferError; pThisCC->RootHub.IRhPort.pfnStartFrame = ohciR3StartFrame; pThisCC->RootHub.IRhPort.pfnFrameRateChanged = ohciR3FrameRateChanged; /* USB LED */ pThisCC->RootHub.Led.u32Magic = PDMLED_MAGIC; pThisCC->RootHub.ILeds.pfnQueryStatusLed = ohciR3RhQueryStatusLed; /* * Read configuration. */ PDMDEV_VALIDATE_CONFIG_RETURN(pDevIns, "Ports", ""); /* Number of ports option. */ uint32_t cPorts; int rc = pDevIns->pHlpR3->pfnCFGMQueryU32Def(pCfg, "Ports", &cPorts, OHCI_NDP_DEFAULT); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("OHCI configuration error: failed to read Ports as integer")); if (cPorts == 0 || cPorts > OHCI_NDP_MAX) return PDMDevHlpVMSetError(pDevIns, VERR_INVALID_PARAMETER, RT_SRC_POS, N_("OHCI configuration error: Ports must be in range [%u,%u]"), 1, OHCI_NDP_MAX); /* Store the configured NDP; it will be used everywhere else from now on. */ pThis->RootHub.desc_a = cPorts; /* * Register PCI device and I/O region. */ rc = PDMDevHlpPCIRegister(pDevIns, pPciDev); if (RT_FAILURE(rc)) return rc; #ifdef VBOX_WITH_MSI_DEVICES PDMMSIREG MsiReg; RT_ZERO(MsiReg); MsiReg.cMsiVectors = 1; MsiReg.iMsiCapOffset = 0x80; MsiReg.iMsiNextOffset = 0x00; rc = PDMDevHlpPCIRegisterMsi(pDevIns, &MsiReg); if (RT_FAILURE(rc)) { PDMPciDevSetCapabilityList(pPciDev, 0x0); /* That's OK, we can work without MSI */ } #endif rc = PDMDevHlpPCIIORegionCreateMmio(pDevIns, 0, 4096, PCI_ADDRESS_SPACE_MEM, ohciMmioWrite, ohciMmioRead, NULL /*pvUser*/, IOMMMIO_FLAGS_READ_DWORD | IOMMMIO_FLAGS_WRITE_DWORD_ZEROED | IOMMMIO_FLAGS_DBGSTOP_ON_COMPLICATED_WRITE, "USB OHCI", &pThis->hMmio); AssertRCReturn(rc, rc); /* * Register the saved state data unit. */ rc = PDMDevHlpSSMRegisterEx(pDevIns, OHCI_SAVED_STATE_VERSION, sizeof(*pThis), NULL, NULL, NULL, NULL, NULL, ohciR3SaveExec, NULL, NULL, ohciR3LoadExec, NULL); AssertRCReturn(rc, rc); /* * Attach to the VBox USB RootHub Driver on LUN #0. */ rc = PDMDevHlpDriverAttach(pDevIns, 0, &pThisCC->RootHub.IBase, &pThisCC->RootHub.pIBase, "RootHub"); if (RT_FAILURE(rc)) { AssertMsgFailed(("Configuration error: No roothub driver attached to LUN #0!\n")); return rc; } pThisCC->RootHub.pIRhConn = PDMIBASE_QUERY_INTERFACE(pThisCC->RootHub.pIBase, VUSBIROOTHUBCONNECTOR); AssertMsgReturn(pThisCC->RootHub.pIRhConn, ("Configuration error: The driver doesn't provide the VUSBIROOTHUBCONNECTOR interface!\n"), VERR_PDM_MISSING_INTERFACE); /* * Attach status driver (optional). */ PPDMIBASE pBase; rc = PDMDevHlpDriverAttach(pDevIns, PDM_STATUS_LUN, &pThisCC->RootHub.IBase, &pBase, "Status Port"); if (RT_SUCCESS(rc)) pThisCC->RootHub.pLedsConnector = PDMIBASE_QUERY_INTERFACE(pBase, PDMILEDCONNECTORS); else if (rc != VERR_PDM_NO_ATTACHED_DRIVER) { AssertMsgFailed(("Failed to attach to status driver. rc=%Rrc\n", rc)); return rc; } /* Set URB parameters. */ rc = VUSBIRhSetUrbParams(pThisCC->RootHub.pIRhConn, sizeof(VUSBURBHCIINT), sizeof(VUSBURBHCITDINT)); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("OHCI: Failed to set URB parameters")); /* * Take down the virtual clock frequence for use in ohciR3FrameRateChanged(). * (Used to be a timer, thus the name.) */ pThis->u64TimerHz = PDMDevHlpTMTimeVirtGetFreq(pDevIns); /* * Critical sections: explain */ rc = PDMDevHlpCritSectInit(pDevIns, &pThis->CsIrq, RT_SRC_POS, "OHCI#%uIrq", iInstance); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("OHCI: Failed to create critical section")); rc = RTCritSectInit(&pThisCC->CritSect); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("OHCI: Failed to create critical section")); /* * Do a hardware reset. */ ohciR3DoReset(pDevIns, pThis, pThisCC, OHCI_USB_RESET, false /* don't reset devices */); # ifdef VBOX_WITH_STATISTICS /* * Register statistics. */ PDMDevHlpSTAMRegister(pDevIns, &pThis->StatCanceledIsocUrbs, STAMTYPE_COUNTER, "CanceledIsocUrbs", STAMUNIT_OCCURENCES, "Detected canceled isochronous URBs."); PDMDevHlpSTAMRegister(pDevIns, &pThis->StatCanceledGenUrbs, STAMTYPE_COUNTER, "CanceledGenUrbs", STAMUNIT_OCCURENCES, "Detected canceled general URBs."); PDMDevHlpSTAMRegister(pDevIns, &pThis->StatDroppedUrbs, STAMTYPE_COUNTER, "DroppedUrbs", STAMUNIT_OCCURENCES, "Dropped URBs (endpoint halted, or URB canceled)."); # endif /* * Register debugger info callbacks. */ PDMDevHlpDBGFInfoRegister(pDevIns, "ohci", "OHCI control registers.", ohciR3InfoRegs); # if 0/*def DEBUG_bird*/ // g_fLogInterruptEPs = true; g_fLogControlEPs = true; g_fLogBulkEPs = true; # endif return VINF_SUCCESS; } #else /* !IN_RING3 */ /** * @callback_method_impl{PDMDEVREGR0,pfnConstruct} */ static DECLCALLBACK(int) ohciRZConstruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); POHCI pThis = PDMDEVINS_2_DATA(pDevIns, POHCI); int rc = PDMDevHlpMmioSetUpContext(pDevIns, pThis->hMmio, ohciMmioWrite, ohciMmioRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); return VINF_SUCCESS; } #endif /* !IN_RING3 */ const PDMDEVREG g_DeviceOHCI = { /* .u32version = */ PDM_DEVREG_VERSION, /* .uReserved0 = */ 0, /* .szName = */ "usb-ohci", /* .fFlags = */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RZ | PDM_DEVREG_FLAGS_NEW_STYLE, /* .fClass = */ PDM_DEVREG_CLASS_BUS_USB, /* .cMaxInstances = */ ~0U, /* .uSharedVersion = */ 42, /* .cbInstanceShared = */ sizeof(OHCI), /* .cbInstanceCC = */ sizeof(OHCICC), /* .cbInstanceRC = */ 0, /* .cMaxPciDevices = */ 1, /* .cMaxMsixVectors = */ 0, /* .pszDescription = */ "OHCI USB controller.\n", #if defined(IN_RING3) /* .pszRCMod = */ "VBoxDDRC.rc", /* .pszR0Mod = */ "VBoxDDR0.r0", /* .pfnConstruct = */ ohciR3Construct, /* .pfnDestruct = */ ohciR3Destruct, /* .pfnRelocate = */ NULL, /* .pfnMemSetup = */ NULL, /* .pfnPowerOn = */ NULL, /* .pfnReset = */ ohciR3Reset, /* .pfnSuspend = */ NULL, /* .pfnResume = */ ohciR3Resume, /* .pfnAttach = */ NULL, /* .pfnDetach = */ NULL, /* .pfnQueryInterface = */ NULL, /* .pfnInitComplete = */ NULL, /* .pfnPowerOff = */ NULL, /* .pfnSoftReset = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RING0) /* .pfnEarlyConstruct = */ NULL, /* .pfnConstruct = */ ohciRZConstruct, /* .pfnDestruct = */ NULL, /* .pfnFinalDestruct = */ NULL, /* .pfnRequest = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RC) /* .pfnConstruct = */ ohciRZConstruct, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #else # error "Not in IN_RING3, IN_RING0 or IN_RC!" #endif /* .u32VersionEnd = */ PDM_DEVREG_VERSION }; #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */