Test VM - t-nt350 - Windows NT 3.5(0) no service pack
=====================================================

Setup:
 - Configure a VM t-nt350 with using the Windows NT 3.x settings, up
   the memory to 128MiB.
 - Enable COM1.
 - Make sure networking is NAT and PCNET.
 - Make sure you're using BusLogic for both HD and DVD-ROM.
 - Optionally set 486 as the CPU profile (may avoid install problems):
        VBoxManage modifyvm t-nt350 --cpu-profile "Intel 80486"
 - Install the OS.
        - You probably have to select the AMD PCNET Family Ethernet Adapter
          manually if detection fails.
        - Make sure to configure DHCP and DNS.
 - In the system settings:
        - Reduce the boot wait to 1 second.
        - Disable automatic reboot in recovery settings.
 - Check that you can ping stuff.
 - Insert the ValidationKit ISO and install the test execution service, see
   vboxtxs-readme.txt for details. Needs the NT 3.x bits.
 - Proceed as shown in readme_first.txt