Adding upstream version 4.2.2.upstream/4.2.2

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 396 insertions, 0 deletions

diff --git a/epan/dissectors/packet-mac-lte.h b/epan/dissectors/packet-mac-lte.h
new file mode 100644
index 00000000..eadbce2f
--- /dev/null
+++ b/epan/dissectors/packet-mac-lte.h
@@ -0,0 +1,396 @@
+/* packet-mac-lte.h
+ *
+ * Martin Mathieson
+ *
+ * Wireshark - Network traffic analyzer
+ * By Gerald Combs <gerald@wireshark.org>
+ * Copyright 1998 Gerald Combs
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This header file may also be distributed under
+ * the terms of the BSD Licence as follows:
+ *
+ * Copyright (C) 2009 Martin Mathieson. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+
+#include "ws_symbol_export.h"
+
+/* radioType */
+#define FDD_RADIO 1
+#define TDD_RADIO 2
+
+/* Direction */
+#define DIRECTION_UPLINK   0
+#define DIRECTION_DOWNLINK 1
+
+/* rntiType */
+#define NO_RNTI     0
+#define P_RNTI      1
+#define RA_RNTI     2
+#define C_RNTI      3
+#define SI_RNTI     4
+#define SPS_RNTI    5
+#define M_RNTI      6
+#define SL_BCH_RNTI 7
+#define SL_RNTI     8
+#define SC_RNTI     9
+#define G_RNTI      10
+
+typedef enum mac_lte_oob_event {
+    ltemac_send_preamble,
+    ltemac_send_sr,
+    ltemac_sr_failure
+} mac_lte_oob_event;
+
+typedef enum mac_lte_dl_retx {
+    dl_retx_no,
+    dl_retx_yes,
+    dl_retx_unknown
+} mac_lte_dl_retx;
+
+typedef enum mac_lte_crc_status {
+    crc_fail = 0,
+    crc_success = 1,
+    crc_high_code_rate = 2,
+    crc_pdsch_lost = 3,
+    crc_duplicate_nonzero_rv = 4,
+    crc_false_dci = 5
+} mac_lte_crc_status;
+
+/* N.B. for SCellIndex-r13 extends to 31 */
+typedef enum mac_lte_carrier_id {
+    carrier_id_primary,
+    carrier_id_secondary_1,
+    carrier_id_secondary_2,
+    carrier_id_secondary_3,
+    carrier_id_secondary_4,
+    carrier_id_secondary_5,
+    carrier_id_secondary_6,
+    carrier_id_secondary_7
+} mac_lte_carrier_id;
+
+typedef enum mac_lte_ce_mode {
+    no_ce_mode = 0,
+    ce_mode_a = 1,
+    ce_mode_b = 2
+} mac_lte_ce_mode;
+
+typedef enum mac_lte_nb_mode {
+    no_nb_mode = 0,
+    nb_mode = 1
+} mac_lte_nb_mode;
+
+/* Context info attached to each LTE MAC frame */
+typedef struct mac_lte_info
+{
+    /* Needed for decode */
+    guint8          radioType;
+    guint8          direction;
+    guint8          rntiType;
+
+    /* Extra info to display */
+    guint16         rnti;
+    guint16         ueid;
+
+    /* Timing info */
+    guint16         sysframeNumber;
+    guint16         subframeNumber;
+    gboolean        sfnSfInfoPresent;
+
+    /* Optional field. More interesting for TDD (FDD is always -4 subframeNumber) */
+    gboolean        subframeNumberOfGrantPresent;
+    guint16         subframeNumberOfGrant;
+
+    /* Flag set only if doing PHY-level data test - i.e. there may not be a
+       well-formed MAC PDU so just show as raw data */
+    gboolean        isPredefinedData;
+
+    /* Length of DL PDU or UL grant size in bytes */
+    guint16         length;
+
+    /* 0=newTx, 1=first-retx, etc */
+    guint8          reTxCount;
+    guint8          isPHICHNACK; /* FALSE=PDCCH retx grant, TRUE=PHICH NACK */
+
+    /* UL only.  Indicates if the R10 extendedBSR-Sizes parameter is set */
+    gboolean        isExtendedBSRSizes;
+
+    /* UL only.  Indicates if the R10 simultaneousPUCCH-PUSCH parameter is set for PCell */
+    gboolean        isSimultPUCCHPUSCHPCell;
+
+    /* UL only.  Indicates if the R10 extendedBSR-Sizes parameter is set for PSCell */
+    gboolean        isSimultPUCCHPUSCHPSCell;
+
+    /* Status of CRC check. For UE it is DL only. For eNodeB it is UL
+       only. For an analyzer, it is present for both DL and UL. */
+    gboolean        crcStatusValid;
+    mac_lte_crc_status crcStatus;
+
+    /* Carrier ID */
+    mac_lte_carrier_id   carrierId;
+
+    /* DL only.  Is this known to be a retransmission? */
+    mac_lte_dl_retx dl_retx;
+
+    /* DL only. CE mode to be used for RAR decoding */
+    mac_lte_ce_mode ceMode;
+
+    /* DL and UL. NB-IoT mode of the UE */
+    mac_lte_nb_mode nbMode;
+
+    /* UL only, for now used for CE mode A RAR decoding */
+    guint8          nUlRb;
+
+    /* More Physical layer info (see direction above for which side of union to use) */
+    union {
+        struct mac_lte_ul_phy_info
+        {
+            guint8 present;  /* Remaining UL fields are present and should be displayed */
+            guint8 modulation_type;
+            guint8 tbs_index;
+            guint8 resource_block_length;
+            guint8 resource_block_start;
+            guint8 harq_id;
+            gboolean ndi;
+        } ul_info;
+        struct mac_lte_dl_phy_info
+        {
+            guint8 present; /* Remaining DL fields are present and should be displayed */
+            guint8 dci_format;
+            guint8 resource_allocation_type;
+            guint8 aggregation_level;
+            guint8 mcs_index;
+            guint8 redundancy_version_index;
+            guint8 resource_block_length;
+            guint8 harq_id;
+            gboolean ndi;
+            guint8   transport_block;  /* 0..1 */
+        } dl_info;
+    } detailed_phy_info;
+
+    /* Relating to out-of-band events */
+    /* N.B. dissector will only look to these fields if length is 0... */
+    mac_lte_oob_event  oob_event;
+    guint8             rapid;
+    guint8             rach_attempt_number;
+    #define MAX_SRs 20
+    guint16            number_of_srs;
+    guint16            oob_ueid[MAX_SRs];
+    guint16            oob_rnti[MAX_SRs];
+} mac_lte_info;
+
+ /* 0 to 10 and 32 to 38 */
+#define MAC_LTE_DATA_LCID_COUNT_MAX 18
+
+typedef struct mac_lte_tap_info {
+    /* Info from context */
+    guint16  rnti;
+    guint16  ueid;
+    guint8   rntiType;
+    guint8   isPredefinedData;
+    gboolean crcStatusValid;
+    mac_lte_crc_status   crcStatus;
+    guint8   direction;
+
+    guint8   isPHYRetx;
+    guint16  ueInTTI;
+
+    nstime_t mac_lte_time;
+
+    /* Number of bytes (which part is used depends upon context settings) */
+    guint32  single_number_of_bytes;
+    guint32  bytes_for_lcid[MAC_LTE_DATA_LCID_COUNT_MAX];
+    guint32  sdus_for_lcid[MAC_LTE_DATA_LCID_COUNT_MAX];
+    guint8   number_of_rars;
+    guint8   number_of_paging_ids;
+
+    /* Number of padding bytes includes padding subheaders and trailing padding */
+    guint16  padding_bytes;
+    guint16  raw_length;
+} mac_lte_tap_info;
+
+
+/* Accessor function to check if a frame was considered to be ReTx */
+int is_mac_lte_frame_retx(packet_info *pinfo, guint8 direction);
+
+/**********************************************************************/
+/* UDP framing format                                                 */
+/* -----------------------                                            */
+/* Several people have asked about dissecting MAC by framing          */
+/* PDUs over IP.  A suggested format over UDP has been created        */
+/* and implemented by this dissector, using the definitions           */
+/* below. A link to an example program showing you how to encode      */
+/* these headers and send LTE MAC PDUs on a UDP socket is             */
+/* provided at https://gitlab.com/wireshark/wireshark/-/wikis/MAC-LTE */
+/*                                                                    */
+/* A heuristic dissector (enabled by a preference) will               */
+/* recognise a signature at the beginning of these frames.            */
+/**********************************************************************/
+
+
+/* Signature.  Rather than try to define a port for this, or make the
+   port number a preference, frames will start with this string (with no
+   terminating NULL */
+#define MAC_LTE_START_STRING "mac-lte"
+
+/* Fixed fields.  This is followed by the following 3 mandatory fields:
+   - radioType (1 byte)
+   - direction (1 byte)
+   - rntiType (1 byte)
+   (where the allowed values are defined above */
+
+/* Optional fields. Attaching this info to frames will allow you
+   to show you display/filter/plot/add-custom-columns on these fields, so should
+   be added if available.
+   The format is to have the tag, followed by the value (there is no length field,
+   it's implicit from the tag) */
+
+#define MAC_LTE_RNTI_TAG            0x02
+/* 2 bytes, network order */
+
+#define MAC_LTE_UEID_TAG            0x03
+/* 2 bytes, network order */
+
+#define MAC_LTE_FRAME_SUBFRAME_TAG  0x04
+/* 2 bytes, network order, SFN is stored in 12 MSB and SF in 4 LSB */
+
+#define MAC_LTE_PREDEFINED_DATA_TAG 0x05
+/* 1 byte */
+
+#define MAC_LTE_RETX_TAG            0x06
+/* 1 byte */
+
+#define MAC_LTE_CRC_STATUS_TAG      0x07
+/* 1 byte */
+
+#define MAC_LTE_EXT_BSR_SIZES_TAG   0x08
+/* 0 byte */
+
+#define MAC_LTE_SEND_PREAMBLE_TAG   0x09
+/* 2 bytes, RAPID value (1 byte) followed by RACH attempt number (1 byte) */
+
+#define MAC_LTE_CARRIER_ID_TAG      0x0A
+/* 1 byte */
+
+#define MAC_LTE_PHY_TAG             0x0B
+/* variable length, length (1 byte) then depending on direction
+   in UL: modulation type (1 byte), TBS index (1 byte), RB length (1 byte),
+          RB start (1 byte), HARQ id (1 byte), NDI (1 byte)
+   in DL: DCI format (1 byte), resource allocation type (1 byte), aggregation level (1 byte),
+          MCS index (1 byte), redundancy version (1 byte), resource block length (1 byte),
+          HARQ id (1 byte), NDI (1 byte), TB (1 byte), DL reTx (1 byte) */
+
+#define MAC_LTE_SIMULT_PUCCH_PUSCH_PCELL_TAG  0x0C
+/* 0 byte */
+
+#define MAC_LTE_SIMULT_PUCCH_PUSCH_PSCELL_TAG 0x0D
+/* 0 byte */
+
+#define MAC_LTE_CE_MODE_TAG         0x0E
+/* 1 byte containing mac_lte_ce_mode enum value */
+
+#define MAC_LTE_NB_MODE_TAG         0x0F
+/* 1 byte containing mac_lte_nb_mode enum value */
+
+#define MAC_LTE_N_UL_RB_TAG         0x10
+/* 1 byte containing the number of UL resource blocks: 6, 15, 25, 50, 75 or 100 */
+
+#define MAC_LTE_SR_TAG              0x11
+/* 2 bytes for the number of items, followed by that number of ueid, rnti (2 bytes each) */
+
+
+/* MAC PDU. Following this tag comes the actual MAC PDU (there is no length, the PDU
+   continues until the end of the frame) */
+#define MAC_LTE_PAYLOAD_TAG 0x01
+
+
+/* Type to store parameters for configuring LCID->RLC channel settings for DRB */
+/* Some are optional, and may not be seen (e.g. on reestablishment) */
+typedef struct drb_mapping_t
+{
+    guint16    ueid;                /* Mandatory */
+    guint8     drbid;               /* Mandatory */
+    gboolean   lcid_present;
+    guint8     lcid;                /* Part of LogicalChannelConfig - optional */
+    gboolean   rlcMode_present;
+    guint8     rlcMode;             /* Part of RLC config - optional */
+    gboolean   rlc_ul_ext_li_field; /* Part of RLC config - optional */
+    gboolean   rlc_dl_ext_li_field; /* Part of RLC config - optional */
+    gboolean   rlc_ul_ext_am_sn;    /* Part of RLC config - optional */
+    gboolean   rlc_dl_ext_am_sn;    /* Part of RLC config - optional */
+    gboolean   um_sn_length_present;
+    guint8     um_sn_length;        /* Part of RLC config - optional */
+    gboolean   ul_priority_present;
+    guint8     ul_priority;         /* Part of LogicalChannelConfig - optional */
+    gboolean   pdcp_sn_size_present;
+    guint8     pdcp_sn_size;        /* Part of pdcp-Config - optional */
+} drb_mapping_t;
+
+
+/* Set details of an LCID -> drb channel mapping.  To be called from
+   configuration protocol (e.g. RRC) */
+void set_mac_lte_channel_mapping(drb_mapping_t *drb_mapping);
+
+
+/* Dedicated DRX config. Used to verify that a sensible config is given.
+   Also, beginning to configure MAC with this config and (optionally) show
+   DRX config and state (cycles/timers) attached to each UL/DL PDU! */
+typedef struct drx_config_t {
+    gboolean    configured;
+    guint32     frameNum;
+    guint32     previousFrameNum;
+
+    guint32     onDurationTimer;
+    guint32     inactivityTimer;
+    guint32     retransmissionTimer;
+    guint32     longCycle;
+    guint32     cycleOffset;
+    /* Optional Short cycle */
+    gboolean    shortCycleConfigured;
+    guint32     shortCycle;
+    guint32     shortCycleTimer;
+} drx_config_t;
+
+/* Functions to set/release up dedicated DRX config */
+void set_mac_lte_drx_config(guint16 ueid, drx_config_t *drx_config, packet_info *pinfo);
+void set_mac_lte_drx_config_release(guint16 ueid,  packet_info *pinfo);
+
+/* RRC can tell this dissector which RAPIDs are Group A, Group A&B */
+void set_mac_lte_rapid_ranges(guint groupA, guint all_RA);
+
+/* RRC can indicate whether extended BSR sizes are used */
+void set_mac_lte_extended_bsr_sizes(guint16 ueid, gboolean use_ext_bsr_sizes, packet_info *pinfo);
+
+/* RRC can indicate whether simultaneous PUCCH/PUSCH is used */
+typedef enum {
+    SIMULT_PUCCH_PUSCH_PCELL = 0,
+    SIMULT_PUCCH_PUSCH_PSCELL
+} simult_pucch_pusch_cell_type;
+void set_mac_lte_simult_pucch_pusch(guint16 ueid, simult_pucch_pusch_cell_type cell_type, gboolean use_simult_pucch_pusch, packet_info *pinfo);
+
+/* Functions to be called from outside this module (e.g. in a plugin, where mac_lte_info
+   isn't available) to get/set per-packet data */
+WS_DLL_PUBLIC
+mac_lte_info *get_mac_lte_proto_data(packet_info *pinfo);
+WS_DLL_PUBLIC
+void set_mac_lte_proto_data(packet_info *pinfo, mac_lte_info *p_mac_lte_info);
+
+/* Function to attempt to populate p_mac_lte_info using framing definition above */
+gboolean dissect_mac_lte_context_fields(struct mac_lte_info  *p_mac_lte_info, tvbuff_t *tvb,
+                                        packet_info *pinfo, proto_tree *tree, gint *p_offset);
+
+/*
+ * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
+ *
+ * Local variables:
+ * c-basic-offset: 4
+ * tab-width: 8
+ * indent-tabs-mode: nil
+ * End:
+ *
+ * vi: set shiftwidth=4 tabstop=8 expandtab:
+ * :indentSize=4:tabSize=8:noTabs=true:
+ */