Adding upstream version 4.2.2.upstream/4.2.2

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1367 insertions, 0 deletions

diff --git a/epan/wslua/wslua_file_handler.c b/epan/wslua/wslua_file_handler.c
new file mode 100644
index 0000000..f0c9ad8
--- /dev/null
+++ b/epan/wslua/wslua_file_handler.c
@@ -0,0 +1,1367 @@
+/*
+ * wslua_file_handler.c
+ *
+ * Wireshark's interface to the Lua Programming Language
+ * for custom file reading/writing.
+ *
+ * (c) 2014, Hadriel Kaplan <hadrielk@yahoo.com>
+ *
+ * Wireshark - Network traffic analyzer
+ * By Gerald Combs <gerald@wireshark.org>
+ * Copyright 1998 Gerald Combs
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#include "config.h"
+
+#include "wslua_file_common.h"
+
+#include <errno.h>
+#include <wiretap/file_wrappers.h>
+
+/* WSLUA_CONTINUE_MODULE File */
+
+
+WSLUA_CLASS_DEFINE(FileHandler,NOP);
+/*
+    A FileHandler object, created by a call to FileHandler.new(arg1, arg2, ...).
+    The FileHandler object lets you create a file-format reader, or writer, or
+    both, by setting your own read_open/read or write_open/write functions.
+
+    @since 1.11.3
+ */
+
+static int filehandler_cb_error_handler(lua_State* L) {
+    const gchar* error =  lua_tostring(L,1);
+    const gchar* functype = luaL_optstring(L, lua_upvalueindex(1), "UNKNOWN");
+    report_failure("Lua: Error During execution of FileHandler %s callback:\n %s",functype,error);
+    lua_pop(L, 1);
+    return 0;
+}
+
+static int push_error_handler(lua_State* L, const gchar* funcname) {
+    lua_pushstring(L, funcname);
+    lua_pushcclosure(L, filehandler_cb_error_handler, 1);
+    return 1;
+}
+
+
+/* Keep track of registered FileHandlers such that reloading plugins works. */
+static GSList *registered_file_handlers;
+
+/* During file routines, we cannot allow the FileHandler to get deregistered, since
+   that would change the GArray's in file_access.c and hilarity would ensue. So we
+   set this to true right before pcall(), and back to false afterwards */
+static gboolean in_routine = FALSE;
+
+static void
+report_error(int *err, gchar **err_info, const char *fmt, ...)
+{
+    va_list ap;
+    gchar *msg;
+
+    va_start(ap, fmt);
+    msg = ws_strdup_vprintf(fmt, ap);
+    va_end(ap);
+    if (err != NULL) {
+        *err = WTAP_ERR_INTERNAL;
+        *err_info = msg;
+    } else {
+        ws_warning("%s", msg);
+        g_free(msg);
+    }
+}
+
+/* This does the verification and setup common to all open/read/seek_read/close routines */
+#define INIT_FILEHANDLER_ROUTINE(name,retval,err,err_info) \
+    if (!fh) { \
+        report_error(err, err_info, "Error in file %s: no Lua FileHandler object", #name); \
+        return retval; \
+    } \
+    if (fh->removed) { \
+        return retval; \
+    } \
+    if (!fh->registered) { \
+        report_error(err, err_info, "Error in file %s: Lua FileHandler is not registered", #name); \
+        return retval; \
+    } \
+    if (!fh->L) { \
+        report_error(err, err_info, "Error in file %s: no FileHandler Lua state", #name); \
+        return retval; \
+    } \
+    if (fh->name##_ref == LUA_NOREF) { \
+        report_error(err, err_info, "Error in file %s: no FileHandler %s routine reference", #name, #name); \
+        return retval; \
+    } \
+    L = fh->L; \
+    lua_settop(L,0); \
+    push_error_handler(L, #name " routine"); \
+    lua_rawgeti(L, LUA_REGISTRYINDEX, fh->name##_ref); \
+    if (!lua_isfunction(L, -1)) { \
+        report_error(err, err_info, "Error in file %s: no FileHandler %s routine function in Lua", #name, #name); \
+        return retval; \
+    } \
+    /* now guard against deregistering during pcall() */ \
+    in_routine = TRUE
+
+#define END_FILEHANDLER_ROUTINE() \
+    /* now allow deregistering again */ \
+    in_routine = FALSE
+
+
+/* LUA_ERRGCMM is in Lua 5.2 only - making it 9 disables it */
+#ifndef LUA_ERRGCMM
+#define LUA_ERRGCMM 9
+#endif
+
+#define CASE_ERROR(name,err,err_info) \
+    case LUA_ERRRUN: \
+        report_error(err, err_info, "Run-time error while calling FileHandler %s routine", name); \
+        break; \
+    case LUA_ERRMEM: \
+        report_error(err, err_info, "Memory alloc error while calling FileHandler %s routine", name); \
+        break; \
+    case LUA_ERRERR: \
+        report_error(err, err_info, "Error in error handling while calling FileHandler %s routine", name); \
+        break; \
+    case LUA_ERRGCMM: \
+        report_error(err, err_info, "Error in garbage collector while calling FileHandler %s routine", name); \
+        break; \
+    default: \
+        ws_assert_not_reached(); \
+        break;
+
+/* some declarations */
+static gboolean
+wslua_filehandler_read(wtap *wth, wtap_rec *rec, Buffer *buf,
+                       int *err, gchar **err_info, gint64 *offset);
+static gboolean
+wslua_filehandler_seek_read(wtap *wth, gint64 seek_off, wtap_rec *rec, Buffer *buf,
+                            int *err, gchar **err_info);
+static void
+wslua_filehandler_close(wtap *wth);
+static void
+wslua_filehandler_sequential_close(wtap *wth);
+
+
+/* This is our one-and-only open routine for file handling.  When called by
+ * file_access.c, the wtap wth argument has a void* wslua_data that holds the specific
+ * FileHandler for the specific registered file format reader.  It has this because
+ * we passed it in when we registered the open routine.
+ * The open_file_* routines should return:
+ *  -1 on an I/O error;
+ *  1 if the file they're reading is one of the types it handles;
+ *  0 if the file they're reading isn't the type they're checking for.
+ * If the routine handles this type of file, it should set the "file_type"
+ * field in the "struct wtap" to the type of the file.
+ */
+static wtap_open_return_val
+wslua_filehandler_open(wtap *wth, int *err, gchar **err_info)
+{
+    FileHandler fh = (FileHandler)(wth->wslua_data);
+    wtap_open_return_val retval = WTAP_OPEN_NOT_MINE;
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfo *fc = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(read_open,WTAP_OPEN_ERROR,err,err_info);
+
+    create_wth_priv(L, wth);
+
+    fp = push_File(L, wth->fh);
+    fc = push_CaptureInfo(L, wth, TRUE);
+
+    errno = WTAP_ERR_CANT_OPEN;
+    switch ( lua_pcall(L,2,1,1) ) {
+        case 0:
+            retval = (wtap_open_return_val)wslua_optboolint(L,-1,0);
+            break;
+        CASE_ERROR("read_open",err,err_info)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+
+    if (retval == WTAP_OPEN_MINE) {
+        /* this is our file type - set the routines and settings into wtap */
+
+        if (fh->read_ref != LUA_NOREF) {
+            wth->subtype_read = wslua_filehandler_read;
+        }
+        else {
+            ws_warning("Lua file format module lacks a read routine");
+            return WTAP_OPEN_NOT_MINE;
+        }
+
+        /* when not having a seek_read routine a default will be used */
+        wth->subtype_seek_read = wslua_filehandler_seek_read;
+
+        /* it's ok to not have a close routine */
+        if (fh->read_close_ref != LUA_NOREF)
+            wth->subtype_close = wslua_filehandler_close;
+        else
+            wth->subtype_close = NULL;
+
+        /* it's ok to not have a sequential close routine */
+        if (fh->seq_read_close_ref != LUA_NOREF)
+            wth->subtype_sequential_close = wslua_filehandler_sequential_close;
+        else
+            wth->subtype_sequential_close = NULL;
+
+        wth->file_type_subtype = fh->file_type;
+    }
+    else if (retval == WTAP_OPEN_ERROR) {
+        /* open error - we *must* return an error code! */
+        if (err) {
+            *err = WTAP_ERR_CANT_OPEN;
+        }
+    }
+    else if (retval == WTAP_OPEN_NOT_MINE) {
+        /* not our file type */
+        remove_wth_priv(L, wth);
+    }
+    else {
+        /* not a valid return type */
+        if (err) {
+            *err = WTAP_ERR_INTERNAL;
+            *err_info = ws_strdup_printf("FileHandler read_open routine returned %d", retval);
+        }
+        retval = WTAP_OPEN_ERROR;
+    }
+
+    lua_settop(L,0);
+    return retval;
+}
+
+static gboolean
+wslua_filehandler_read_packet(wtap *wth, FILE_T wth_fh, wtap_rec *rec, Buffer *buf,
+                              int *err, gchar **err_info, gint64 *offset)
+{
+    FileHandler fh = (FileHandler)(wth->wslua_data);
+    int retval = -1;
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfo *fc = NULL;
+    FrameInfo *fi = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(read,FALSE,err,err_info);
+
+    /* Reset errno */
+    if (err) {
+        *err = errno = 0;
+    }
+
+    wtap_block_unref(rec->block);
+    rec->block = NULL;
+
+    fp = push_File(L, wth_fh);
+    fc = push_CaptureInfo(L, wth, FALSE);
+    fi = push_FrameInfo(L, rec, buf);
+
+    switch ( lua_pcall(L,3,1,1) ) {
+        case 0:
+            /*
+             * Return values for FileHandler:read():
+             * Integer is the number of read bytes.
+             * Boolean false indicates an error.
+             * XXX handling of boolean true is not documented. Currently it will
+             * succeed without advancing data offset. Should it fail instead?
+             */
+            if (lua_type(L, -1) == LUA_TNUMBER) {
+                *offset = wslua_togint64(L, -1);
+                retval = 1;
+                break;
+            }
+            retval = wslua_optboolint(L,-1,0);
+            break;
+        CASE_ERROR("read",err,err_info)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+    (*fi)->expired = TRUE;
+    lua_settop(L,0);
+
+    return (retval == 1);
+}
+
+/* The classic wtap read routine.  This returns TRUE if it found the next packet,
+ * else FALSE.
+ * If it finds a frame/packet, it should set the pseudo-header info (ie, let Lua set it).
+ * Also Lua needs to set data_offset to the beginning of the line we're returning.
+ * This will be the seek_off parameter when this frame is re-read.
+ */
+static gboolean
+wslua_filehandler_read(wtap *wth, wtap_rec *rec, Buffer *buf,
+                       int *err, gchar **err_info, gint64 *offset)
+{
+    return wslua_filehandler_read_packet(wth, wth->fh, rec, buf, err, err_info, offset);
+}
+
+static gboolean
+wslua_filehandler_seek_read_packet(wtap *wth, gint64 seek_off, wtap_rec *rec, Buffer *buf,
+                            int *err, gchar **err_info)
+{
+    FileHandler fh = (FileHandler)(wth->wslua_data);
+    int retval = -1;
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfo *fc = NULL;
+    FrameInfo *fi = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(seek_read,FALSE,err,err_info);
+
+    /* Reset errno */
+    if (err) {
+        *err = errno = 0;
+    }
+
+    wtap_block_unref(rec->block);
+    rec->block = NULL;
+
+    fp = push_File(L, wth->random_fh);
+    fc = push_CaptureInfo(L, wth, FALSE);
+    fi = push_FrameInfo(L, rec, buf);
+    lua_pushnumber(L, (lua_Number)seek_off);
+
+    switch ( lua_pcall(L,4,1,1) ) {
+        case 0:
+            /*
+             * Return values for FileHandler:seek_read():
+             * Boolean true for successful parsing, false/nil on error.
+             * Numbers (including zero) are interpreted as success for
+             * compatibility to match FileHandler:seek semantics.
+             * (Other values are unspecified/undocumented, but happen to be
+             * treated as success.)
+             */
+            retval = lua_toboolean(L, -1);
+            break;
+        CASE_ERROR("seek_read",err,err_info)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+    (*fi)->expired = TRUE;
+    lua_settop(L,0);
+
+    return (retval == 1);
+}
+
+/* Default FileHandler:seek_read() implementation.
+ * Do a standard file_seek() and then call FileHandler:read().
+ */
+static gboolean
+wslua_filehandler_seek_read_default(wtap *wth, gint64 seek_off, wtap_rec *rec, Buffer *buf,
+                                    int *err, gchar **err_info)
+{
+    gint64 offset = file_seek(wth->random_fh, seek_off, SEEK_SET, err);
+
+    if (offset < 0) {
+        return FALSE;
+    }
+
+    return wslua_filehandler_read_packet(wth, wth->random_fh, rec, buf, err, err_info, &offset);
+}
+
+/* Classic wtap seek_read function, called by wtap core.  This must return TRUE on
+ * success, FALSE on error.
+ */
+static gboolean
+wslua_filehandler_seek_read(wtap *wth, gint64 seek_off, wtap_rec *rec, Buffer *buf,
+                            int *err, gchar **err_info)
+{
+    FileHandler fh = (FileHandler)(wth->wslua_data);
+
+    if (fh->removed) {
+        /* Return success when removed during reloading Lua plugins */
+        return TRUE;
+    }
+
+    if (fh->seek_read_ref != LUA_NOREF) {
+        return wslua_filehandler_seek_read_packet(wth, seek_off, rec, buf, err, err_info);
+    } else {
+        return wslua_filehandler_seek_read_default(wth, seek_off, rec, buf, err, err_info);
+    }
+}
+
+/* Classic wtap close function, called by wtap core.
+ */
+static void
+wslua_filehandler_close(wtap *wth)
+{
+    FileHandler fh = (FileHandler)(wth->wslua_data);
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfo *fc = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(read_close,,NULL,NULL);
+
+    fp = push_File(L, wth->fh);
+    fc = push_CaptureInfo(L, wth, FALSE);
+
+    switch ( lua_pcall(L,2,1,1) ) {
+        case 0:
+            break;
+        CASE_ERROR("read_close",NULL,NULL)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    remove_wth_priv(L, wth);
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+    lua_settop(L,0);
+
+    return;
+}
+
+/* Classic wtap sequential close function, called by wtap core.
+ */
+static void
+wslua_filehandler_sequential_close(wtap *wth)
+{
+    FileHandler fh = (FileHandler)(wth->wslua_data);
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfo *fc = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(seq_read_close,,NULL,NULL);
+
+    fp = push_File(L, wth->fh);
+    fc = push_CaptureInfo(L, wth, FALSE);
+
+    switch ( lua_pcall(L,2,1,1) ) {
+        case 0:
+            break;
+        CASE_ERROR("seq_read_close",NULL,NULL)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+    lua_settop(L,0);
+
+    return;
+}
+
+
+/* basically a dummy function to use for can_write_encap so that the caller calls
+ * wslua_can_write_encap instead (which will be wslua_filehandler_can_write_encap)
+ */
+static int
+wslua_dummy_can_write_encap(int encap _U_)
+{
+    return WTAP_ERR_CHECK_WSLUA;
+}
+
+/* Similar to the classic wtap can_write_encap function.
+ * This returns 0 if the encap is ok for this file type.
+ */
+static int
+wslua_filehandler_can_write_encap(int encap, void* data)
+{
+    FileHandler fh = (FileHandler)(data);
+    int retval = WTAP_ERR_UNWRITABLE_ENCAP;
+    lua_State* L = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(can_write_encap,WTAP_ERR_UNWRITABLE_ENCAP,NULL,NULL);
+
+    lua_pushnumber(L, encap);
+
+    switch ( lua_pcall(L,1,1,1) ) {
+        case 0:
+            retval = wslua_optboolint(L,-1,WTAP_ERR_UNWRITABLE_ENCAP);
+            break;
+        CASE_ERROR("can_write_encap",NULL,NULL)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    /* the retval we got was either a 1 for true, 0 for false, or WTAP_ERR_UNWRITABLE_ENCAP;
+       but can_write_encap() expects 0 to be true/yes */
+    if (retval == 1) {
+        retval = 0;
+    } else if (retval == 0) {
+        retval = WTAP_ERR_UNWRITABLE_ENCAP;
+    }
+
+    return retval;
+}
+
+/* some declarations */
+static gboolean
+wslua_filehandler_dump(wtap_dumper *wdh, const wtap_rec *rec,
+                      const guint8 *pd, int *err, gchar **err_info);
+static gboolean
+wslua_filehandler_dump_finish(wtap_dumper *wdh, int *err, gchar **err_info);
+
+
+/* The classic wtap dump_open function.
+ * This returns 1 (TRUE) on success.
+ */
+static int
+wslua_filehandler_dump_open(wtap_dumper *wdh, int *err, gchar **err_info)
+{
+    FileHandler fh = (FileHandler)(wdh->wslua_data);
+    int retval = 0;
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfoConst *fc = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(write_open,0,err,err_info);
+
+    create_wdh_priv(L, wdh);
+
+    fp = push_Wdh(L, wdh);
+    fc = push_CaptureInfoConst(L,wdh);
+
+    /* Reset err */
+    if (err) {
+        *err = 0;
+    }
+
+    switch ( lua_pcall(L,2,1,1) ) {
+        case 0:
+            retval = wslua_optboolint(L,-1,0);
+            break;
+        CASE_ERROR("write_open",err,err_info)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+
+    if (retval == 1) {
+        /* this is our file type - set the routines and settings into wtap */
+
+        if (fh->write_ref != LUA_NOREF) {
+            wdh->subtype_write = wslua_filehandler_dump;
+        }
+        else {
+            ws_warning("FileHandler was not set with a write function, even though write_open() returned true");
+            return 0;
+        }
+
+        /* it's ok to not have a finish routine */
+        if (fh->write_close_ref != LUA_NOREF)
+            wdh->subtype_finish = wslua_filehandler_dump_finish;
+        else
+            wdh->subtype_finish = NULL;
+    }
+    else {
+        /* not our file type? */
+        remove_wdh_priv(L, wdh);
+    }
+
+    return retval;
+}
+
+/* The classic wtap dump routine.  This returns TRUE if it writes the current packet,
+ * else FALSE.
+*/
+static gboolean
+wslua_filehandler_dump(wtap_dumper *wdh, const wtap_rec *rec,
+                      const guint8 *pd, int *err, gchar **err_info)
+{
+    FileHandler fh = (FileHandler)(wdh->wslua_data);
+    int retval = -1;
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfoConst *fc = NULL;
+    FrameInfoConst *fi = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(write,FALSE,err,err_info);
+
+    /* Reset errno */
+    if (err) {
+        *err = errno = 0;
+    }
+
+    fp = push_Wdh(L, wdh);
+    fc = push_CaptureInfoConst(L,wdh);
+    fi = push_FrameInfoConst(L, rec, pd);
+
+    errno = WTAP_ERR_CANT_WRITE;
+    switch ( lua_pcall(L,3,1,1) ) {
+        case 0:
+            retval = wslua_optboolint(L,-1,0);
+            break;
+        CASE_ERROR("write",err,err_info)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+    (*fi)->expired = TRUE;
+
+    return (retval == 1);
+}
+
+/* The classic wtap dump_finish routine.  This returns TRUE if it
+ * writes out the last information cleanly, else FALSE.
+*/
+static gboolean
+wslua_filehandler_dump_finish(wtap_dumper *wdh, int *err, gchar **err_info)
+{
+    FileHandler fh = (FileHandler)(wdh->wslua_data);
+    int retval = -1;
+    lua_State* L = NULL;
+    File *fp = NULL;
+    CaptureInfoConst *fc = NULL;
+
+    INIT_FILEHANDLER_ROUTINE(write_close,FALSE,err,err_info);
+
+    /* Reset errno */
+    if (err) {
+        *err = errno = 0;
+    }
+
+    fp = push_Wdh(L, wdh);
+    fc = push_CaptureInfoConst(L,wdh);
+
+    errno = WTAP_ERR_CANT_CLOSE;
+    switch ( lua_pcall(L,2,1,1) ) {
+        case 0:
+            retval = wslua_optboolint(L,-1,0);
+            break;
+        CASE_ERROR("write_close",err,err_info)
+    }
+
+    END_FILEHANDLER_ROUTINE();
+
+    remove_wdh_priv(L, wdh);
+
+    (*fp)->expired = TRUE;
+    (*fc)->expired = TRUE;
+
+    return (retval == 1);
+}
+
+/*
+ * Prototype table of option support.
+ * We start out saying we don't support comments, and we don't mention
+ * other options.
+ */
+static const struct supported_option_type option_type_proto[] = {
+	{ OPT_COMMENT, OPTION_NOT_SUPPORTED }
+};
+
+/*
+ * Prototype table of block type support.
+ * We start out saying we only support packets.
+ */
+static const struct supported_block_type block_type_proto[] = {
+	{ WTAP_BLOCK_SECTION, BLOCK_NOT_SUPPORTED, 0, NULL },
+	{ WTAP_BLOCK_IF_ID_AND_INFO, BLOCK_NOT_SUPPORTED, 0, NULL },
+	{ WTAP_BLOCK_NAME_RESOLUTION, BLOCK_NOT_SUPPORTED, 0, NULL },
+	{ WTAP_BLOCK_IF_STATISTICS, BLOCK_NOT_SUPPORTED, 0, NULL },
+	{ WTAP_BLOCK_DECRYPTION_SECRETS, BLOCK_NOT_SUPPORTED, 0, NULL },
+	{ WTAP_BLOCK_PACKET, MULTIPLE_BLOCKS_SUPPORTED, 0, NULL },
+	{ WTAP_BLOCK_FT_SPECIFIC_REPORT, BLOCK_NOT_SUPPORTED, 0, NULL },
+	{ WTAP_BLOCK_FT_SPECIFIC_EVENT, BLOCK_NOT_SUPPORTED, 0, NULL }
+};
+
+#define NUM_LISTED_BLOCK_TYPES (sizeof block_type_proto / sizeof block_type_proto[0])
+
+WSLUA_CONSTRUCTOR FileHandler_new(lua_State* L) {
+    /* Creates a new FileHandler */
+#define WSLUA_ARG_FileHandler_new_DESCRIPTION 1 /* A description of the file type, for display purposes only. E.g., "Wireshark - pcapng" */
+#define WSLUA_ARG_FileHandler_new_NAME 2 /* The file type name, used to look up the file type in various places. E.g., "pcapng". Note: The name cannot already be in use. */
+#define WSLUA_ARG_FileHandler_new_INTERNAL_DESCRIPTION 3 /* Descriptive text about this file format, for internal display purposes only */
+#define WSLUA_ARG_FileHandler_new_TYPE 4 /* The type of FileHandler, "r"/"w"/"rw" for reader/writer/both, include "m" for magic, "s" for strong heuristic */
+
+    const gchar* description = luaL_checkstring(L,WSLUA_ARG_FileHandler_new_DESCRIPTION);
+    const gchar* name = luaL_checkstring(L,WSLUA_ARG_FileHandler_new_NAME);
+    const gchar* internal_description = luaL_checkstring(L,WSLUA_ARG_FileHandler_new_INTERNAL_DESCRIPTION);
+    const gchar* type = luaL_checkstring(L,WSLUA_ARG_FileHandler_new_TYPE);
+    FileHandler fh = (FileHandler) g_malloc0(sizeof(struct _wslua_filehandler));
+    struct supported_block_type *supported_blocks;
+
+    fh->is_reader = (strchr(type,'r') != NULL) ? TRUE : FALSE;
+    fh->is_writer = (strchr(type,'w') != NULL) ? TRUE : FALSE;
+
+    if (fh->is_reader && wtap_has_open_info(name)) {
+        g_free(fh);
+        return luaL_error(L, "FileHandler.new: '%s' name already exists for a reader!", name);
+    }
+
+    if (fh->is_writer && wtap_name_to_file_type_subtype(name) > -1) {
+        g_free(fh);
+        return luaL_error(L, "FileHandler.new: '%s' name already exists for a writer!", name);
+    }
+
+    fh->type = g_strdup(type);
+    fh->extensions = NULL;
+    fh->finfo.description = g_strdup(description);
+    fh->finfo.name = g_strdup(name);
+    fh->finfo.default_file_extension = NULL;
+    fh->finfo.additional_file_extensions = NULL;
+    fh->finfo.writing_must_seek = FALSE;
+    supported_blocks = (struct supported_block_type  *)g_memdup2(&block_type_proto, sizeof block_type_proto);
+    /*
+     * Add a list of options to the seciton block, interface block, and
+     * packet block, so the file handler can indicate comment support.
+     */
+    for (size_t i = 0; i < NUM_LISTED_BLOCK_TYPES; i++) {
+        switch (supported_blocks[i].type) {
+
+        case WTAP_BLOCK_SECTION:
+        case WTAP_BLOCK_IF_ID_AND_INFO:
+        case WTAP_BLOCK_PACKET:
+            supported_blocks[i].num_supported_options = OPTION_TYPES_SUPPORTED(option_type_proto);
+            supported_blocks[i].supported_options = (struct supported_option_type *)g_memdup2(&option_type_proto, sizeof option_type_proto);
+            break;
+
+        default:
+            break;
+        }
+    }
+    fh->finfo.num_supported_blocks = NUM_LISTED_BLOCK_TYPES;
+    fh->finfo.supported_blocks = supported_blocks;
+    fh->finfo.can_write_encap = NULL;
+    fh->finfo.dump_open = NULL;
+    /* this will be set to a new file_type when registered */
+    fh->file_type = WTAP_FILE_TYPE_SUBTYPE_UNKNOWN;
+
+    fh->internal_description = g_strdup(internal_description);
+    fh->L = L;
+    fh->read_open_ref = LUA_NOREF;
+    fh->read_ref = LUA_NOREF;
+    fh->seek_read_ref = LUA_NOREF;
+    fh->read_close_ref = LUA_NOREF;
+    fh->seq_read_close_ref = LUA_NOREF;
+    fh->write_open_ref = LUA_NOREF;
+    fh->write_ref = LUA_NOREF;
+    fh->write_close_ref = LUA_NOREF;
+    fh->can_write_encap_ref = LUA_NOREF;
+
+    fh->registered = FALSE;
+
+    pushFileHandler(L,fh);
+    WSLUA_RETURN(1); /* The newly created FileHandler object */
+}
+
+WSLUA_METAMETHOD FileHandler__tostring(lua_State* L) {
+    /* Generates a string of debug info for the FileHandler */
+    FileHandler fh = toFileHandler(L,1);
+
+    if (!fh) {
+        lua_pushstring(L,"FileHandler pointer is NULL!");
+    } else {
+        lua_pushfstring(L, "FileHandler(%s): description='%s', internal description='%s', read_open=%d, read=%d, write=%d",
+            fh->finfo.name, fh->finfo.description, fh->internal_description, fh->read_open_ref, fh->read_ref, fh->write_ref);
+    }
+
+    WSLUA_RETURN(1); /* String of debug information. */
+}
+
+static int FileHandler__gc(lua_State* L _U_) {
+    /* do NOT free FileHandler, it's never free'd */
+    /* TODO: handle this and other Lua things that should be free'd on exit, in a better way */
+    return 0;
+}
+
+/* A Lua File handler must not be expired, and must be either a reader or writer, and
+ * a *reader* one MUST at least define read_open, read, and seek_read funcs; and
+ * a *writer* one MUST at least define can_write_encap, write_open, and write funcs
+ */
+static gboolean verify_filehandler_complete(FileHandler fh) {
+    return ((fh->is_reader || fh->is_writer) &&
+            (!fh->is_reader ||
+             (fh->is_reader &&
+              fh->read_open_ref != LUA_NOREF &&
+              fh->read_ref      != LUA_NOREF)) &&
+            (!fh->is_writer ||
+             (fh->is_writer &&
+              fh->can_write_encap_ref != LUA_NOREF &&
+              fh->write_open_ref      != LUA_NOREF &&
+              fh->write_ref           != LUA_NOREF)) );
+}
+
+
+WSLUA_FUNCTION wslua_register_filehandler(lua_State* L) {
+    /* Register the FileHandler into Wireshark/TShark, so they can read/write this new format.
+       All functions and settings must be complete before calling this registration function.
+       This function cannot be called inside the reading/writing callback functions. */
+#define WSLUA_ARG_register_filehandler_FILEHANDLER 1 /* The FileHandler object to be registered */
+    FileHandler fh = checkFileHandler(L,WSLUA_ARG_register_filehandler_FILEHANDLER);
+
+    if (in_routine)
+        return luaL_error(L,"a FileHandler cannot be registered during reading/writing callback functions");
+
+    if (fh->registered)
+        return luaL_error(L,"this FileHandler is already registered");
+
+    if (!verify_filehandler_complete(fh))
+        return luaL_error(L,"this FileHandler is not complete enough to register");
+
+    if (fh->is_writer) {
+        if (fh->extensions && fh->extensions[0]) {
+            char *extension = g_strdup(fh->extensions);
+            char *extra_extensions = strchr(extension, ';');
+            if (extra_extensions) {
+                /* Split "cap;pcap" -> "cap" and "pcap" */
+                *extra_extensions++ = '\0';
+            }
+            fh->finfo.default_file_extension = extension;
+            fh->finfo.additional_file_extensions = extra_extensions;
+        }
+        fh->finfo.can_write_encap = wslua_dummy_can_write_encap;
+        fh->finfo.wslua_info = g_new0(wtap_wslua_file_info_t, 1);
+        fh->finfo.wslua_info->wslua_can_write_encap = wslua_filehandler_can_write_encap;
+        fh->finfo.wslua_info->wslua_data = (void*)(fh);
+        fh->finfo.dump_open = wslua_filehandler_dump_open;
+    }
+
+    fh->file_type = wtap_register_file_type_subtype(&(fh->finfo));
+
+    if (fh->is_reader) {
+        struct open_info oi = { NULL, OPEN_INFO_HEURISTIC, NULL, NULL, NULL, NULL };
+        oi.name = fh->finfo.name;
+        oi.open_routine = wslua_filehandler_open;
+        oi.extensions = fh->extensions;
+        oi.wslua_data = (void*)(fh);
+        if (strchr(fh->type,'m') != NULL) {
+            oi.type = OPEN_INFO_MAGIC;
+        } else {
+            oi.type = OPEN_INFO_HEURISTIC;
+        }
+        wtap_register_open_info(&oi, (strchr(fh->type,'s') != NULL));
+    }
+
+    fh->registered = TRUE;
+    registered_file_handlers = g_slist_prepend(registered_file_handlers, fh);
+
+    lua_pushnumber(L, fh->file_type);
+
+    WSLUA_RETURN(1); /* the new type number for this file reader/write */
+}
+
+static void
+wslua_deregister_filehandler_work(FileHandler fh)
+{
+    /* undo writing stuff, even if it wasn't a writer */
+    fh->finfo.can_write_encap = NULL;
+    if (fh->finfo.wslua_info) {
+        fh->finfo.wslua_info->wslua_can_write_encap = NULL;
+        fh->finfo.wslua_info->wslua_data = NULL;
+        g_free(fh->finfo.wslua_info);
+        fh->finfo.wslua_info = NULL;
+    }
+    g_free((char *)fh->finfo.default_file_extension);
+    fh->finfo.default_file_extension = NULL;
+    fh->finfo.additional_file_extensions = NULL;
+    fh->finfo.dump_open = NULL;
+
+    if (fh->file_type != WTAP_FILE_TYPE_SUBTYPE_UNKNOWN) {
+        wtap_deregister_file_type_subtype(fh->file_type);
+    }
+
+    if (fh->is_reader && wtap_has_open_info(fh->finfo.name)) {
+        wtap_deregister_open_info(fh->finfo.name);
+    }
+
+    fh->registered = FALSE;
+}
+
+WSLUA_FUNCTION wslua_deregister_filehandler(lua_State* L) {
+    /* Deregister the FileHandler from Wireshark/TShark, so it no longer gets used for reading/writing/display.
+       This function cannot be called inside the reading/writing callback functions. */
+#define WSLUA_ARG_deregister_filehandler_FILEHANDLER 1 /* The FileHandler object to be deregistered */
+    FileHandler fh = checkFileHandler(L,WSLUA_ARG_deregister_filehandler_FILEHANDLER);
+
+    if (in_routine)
+        return luaL_error(L,"A FileHandler cannot be deregistered during reading/writing callback functions");
+
+    if (!fh->registered)
+        return 0;
+
+    wslua_deregister_filehandler_work(fh);
+    registered_file_handlers = g_slist_remove(registered_file_handlers, fh);
+
+    return 0;
+}
+
+/* The following macros generate setter functions for Lua, for the following Lua
+   function references in _wslua_filehandler struct:
+    int read_open_ref;
+    int read_ref;
+    int seek_read_ref;
+    int read_close_ref;
+    int seq_read_close_ref;
+    int can_write_encap_ref;
+    int write_open_ref;
+    int write_ref;
+    int write_close_ref;
+*/
+
+/* WSLUA_ATTRIBUTE FileHandler_read_open WO The Lua function to be called when Wireshark opens a file for reading.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfo` object
+
+    The purpose of the Lua function set to this `read_open` field is to check if the file Wireshark is opening is of its type,
+    for example by checking for magic numbers or trying to parse records in the file, etc.  The more can be verified
+    the better, because Wireshark tries all file readers until it finds one that accepts the file, so accepting an
+    incorrect file prevents other file readers from reading their files.
+
+    The called Lua function should return true if the file is its type (it accepts it), false if not.  The Lua
+    function must also set the File offset position (using `file:seek()`) to where it wants it to be for its first
+    `read()` call.
+    */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,read_open);
+
+/* WSLUA_ATTRIBUTE FileHandler_read WO The Lua function to be called when Wireshark wants to read a packet from the file.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfo` object
+        3. A `FrameInfo` object
+
+    The purpose of the Lua function set to this `read` field is to read the next packet from the file, and setting the parsed/read
+    packet into the frame buffer using `FrameInfo.data = foo` or `FrameInfo:read_data(file, frame.captured_length)`.
+
+    The called Lua function should return the file offset/position number where the packet begins, or false if it hit an
+    error.  The file offset will be saved by Wireshark and passed into the set `seek_read()` Lua function later.
+    */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,read);
+
+/* WSLUA_ATTRIBUTE FileHandler_seek_read WO The Lua function to be called when Wireshark wants to read a packet from the file at the given offset.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfo` object
+        3. A `FrameInfo` object
+        4. The file offset number previously set by the `read()` function call
+
+    The called Lua function should return true if the read was successful, or false if it hit an error.
+    Since 2.4.0, a number is also acceptable to signal success, this allows for reuse of `FileHandler:read`:
+
+    [source,lua]
+    ----
+    local function fh_read(file, capture, frame) ... end
+    myfilehandler.read = fh_read
+
+    function myfilehandler.seek_read(file, capture, frame, offset)
+        if not file:seek("set", offset) then
+            -- Seeking failed, return failure
+            return false
+        end
+
+        -- Now try to read one frame
+        return fh_read(file, capture, frame)
+    end
+    ----
+
+    Since 3.6.0, it's possible to omit the `FileHandler:seek_read()` function to get a default seek_read implementation.
+ */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,seek_read);
+
+/* WSLUA_ATTRIBUTE FileHandler_read_close WO The Lua function to be called when Wireshark wants to close the read file completely.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfo` object
+
+    It is not necessary to set this field to a Lua function - FileHandler can be registered without doing so - it
+    is available in case there is memory/state to clear in your script when the file is closed. */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,read_close);
+
+/* WSLUA_ATTRIBUTE FileHandler_seq_read_close WO The Lua function to be called when Wireshark wants to close the sequentially-read file.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfo` object
+
+    It is not necessary to set this field to a Lua
+    function - FileHandler can be registered without doing so - it is available in case there is memory/state to clear in your script
+    when the file is closed for the sequential reading portion.  After this point, there will be no more calls to `read()`, only `seek_read()`. */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,seq_read_close);
+
+
+/* WSLUA_ATTRIBUTE FileHandler_can_write_encap WO The Lua function to be called when Wireshark wants to write a file,
+    by checking if this file writer can handle the wtap packet encapsulation(s).
+
+    When later called by Wireshark, the Lua function will be given a Lua number, which matches one of the encapsulations
+    in the Lua `wtap_encaps` table.  This might be the `wtap_encap.PER_PACKET` number, meaning the capture contains multiple
+    encapsulation types, and the file reader should only return true if it can handle multiple encap types in one file. The
+    function will then be called again, once for each encap type in the file, to make sure it can write each one.
+
+    If the Lua file writer can write the given type of encapsulation into a file, then it returns the boolean true, else false. */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,can_write_encap);
+
+/* WSLUA_ATTRIBUTE FileHandler_write_open WO The Lua function to be called when Wireshark opens a file for writing.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfoConst` object
+
+    The purpose of the Lua function set to this `write_open` field is similar to the read_open callback function:
+    to initialize things necessary for writing the capture to a file. For example, if the output file format has a
+    file header, then the file header should be written within this write_open function.
+
+    The called Lua function should return true on success, or false if it hit an error.
+
+    Also make sure to set the `FileHandler.write` (and potentially `FileHandler.write_finish`) functions before
+    returning true from this function. */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,write_open);
+
+/* WSLUA_ATTRIBUTE FileHandler_write WO The Lua function to be called when Wireshark wants to write a packet to the file.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfoConst` object
+        3. A `FrameInfoConst` object of the current frame/packet to be written
+
+    The purpose of the Lua function set to this `write` field is to write the next packet to the file.
+
+    The called Lua function should return true on success, or false if it hit an error. */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,write);
+
+/* WSLUA_ATTRIBUTE FileHandler_write_finish WO The Lua function to be called when Wireshark wants to close the written file.
+
+    When later called by Wireshark, the Lua function will be given:
+        1. A `File` object
+        2. A `CaptureInfoConst` object
+
+    It is not necessary to set this field to a Lua function - `FileHandler` can be registered without doing so - it is available
+    in case there is memory/state to clear in your script when the file is closed. */
+WSLUA_ATTRIBUTE_FUNC_SETTER(FileHandler,write_close);
+
+/* generate other member accessors setters/getters */
+
+/* WSLUA_ATTRIBUTE FileHandler_type RO The internal file type.  This is automatically set with a new
+    number when the FileHandler is registered. */
+WSLUA_ATTRIBUTE_NAMED_NUMBER_GETTER(FileHandler,type,file_type);
+
+/* WSLUA_ATTRIBUTE FileHandler_extensions RW One or more semicolon-separated file extensions that this file type usually uses.
+
+    For readers using heuristics to determine file type, Wireshark will try the readers of the file's
+    extension first, before trying other readers.  But ultimately Wireshark tries all file readers
+    for any file extension, until it finds one that accepts the file.
+
+    (Since 2.6) For writers, the first extension is used to suggest the default file extension. */
+WSLUA_ATTRIBUTE_STRING_GETTER(FileHandler,extensions);
+WSLUA_ATTRIBUTE_STRING_SETTER(FileHandler,extensions,TRUE);
+
+/* WSLUA_ATTRIBUTE FileHandler_writing_must_seek RW True if the ability to seek is required when writing
+    this file format, else false.
+
+    This will be checked by Wireshark when writing out to compressed
+    file formats, because seeking is not possible with compressed files. Usually a file writer only
+    needs to be able to seek if it needs to go back in the file to change something, such as a block or
+    file length value earlier in the file. */
+WSLUA_ATTRIBUTE_NAMED_BOOLEAN_GETTER(FileHandler,writing_must_seek,finfo.writing_must_seek);
+WSLUA_ATTRIBUTE_NAMED_BOOLEAN_SETTER(FileHandler,writing_must_seek,finfo.writing_must_seek);
+
+/* WSLUA_ATTRIBUTE FileHandler_writes_name_resolution RW True if the file format supports name resolution
+    records, else false. */
+static inline struct supported_block_type *
+safe_cast_away_block_type_const(const struct supported_block_type *arg)
+{
+    /*
+     * Cast away constness without a warning; we know we can do this
+     * because, for Lua file handlers, the table of supported block
+     * types is in allocated memory, so that we *can* modify it.
+     *
+     * The pointer in the file_type_subtype_info structure is a
+     * pointer to const because compiled file handlers will
+     * normally set it to point to a static const structure.
+     */
+DIAG_OFF_CAST_AWAY_CONST
+    return (struct supported_block_type *)arg;
+DIAG_ON_CAST_AWAY_CONST
+}
+
+WSLUA_ATTRIBUTE_GET(FileHandler,writes_name_resolution,{ \
+    gboolean supports_name_resolution = FALSE; \
+    for (size_t i = 0; i < obj->finfo.num_supported_blocks; i++) { \
+        /* \
+         * If WTAP_BLOCK_NAME_RESOLUTION is supported, name \
+         * resolution is supported. \
+         */ \
+        if (obj->finfo.supported_blocks[i].type == WTAP_BLOCK_NAME_RESOLUTION) { \
+            supports_name_resolution = (obj->finfo.supported_blocks[i].support != BLOCK_NOT_SUPPORTED); \
+            break; \
+        } \
+    } \
+    lua_pushboolean(L, supports_name_resolution); \
+});
+WSLUA_ATTRIBUTE_SET(FileHandler,writes_name_resolution, { \
+    gboolean supports_name_resolution; \
+    if (!lua_isboolean(L,-1) ) \
+        return luaL_error(L, "FileHandler's attribute`writes_name_resolution' must be a boolean"); \
+    supports_name_resolution = lua_toboolean(L,-1); \
+    /* \
+     * Update support for WTAP_BLOCK_NAME_RESOLUTION; the entry for \
+     * it should be there. \
+     */ \
+    for (size_t i = 0; i < obj->finfo.num_supported_blocks; i++) { \
+        if (obj->finfo.supported_blocks[i].type == WTAP_BLOCK_NAME_RESOLUTION) { \
+            struct supported_block_type *supported_blocks;
+            supported_blocks = safe_cast_away_block_type_const(obj->finfo.supported_blocks); \
+
+            supported_blocks[i].support = supports_name_resolution ? ONE_BLOCK_SUPPORTED : BLOCK_NOT_SUPPORTED; \
+            break; \
+        } \
+    } \
+});
+
+/* WSLUA_ATTRIBUTE FileHandler_supported_comment_types RW Set to the bit-wise OR'ed number representing
+    the type of comments the file writer supports writing, based on the numbers in the `wtap_comments` table. */
+static inline struct supported_option_type *
+safe_cast_away_option_type_const(const struct supported_option_type *arg)
+{
+    /*
+     * Cast away constness without a warning; we know we can do this
+     * because, for Lua file handlers, the table of supported option
+     * types is in allocated memory, so that we *can* modify it.
+     *
+     * The pointer in the file_type_subtype_info structure is a
+     * pointer to const because compiled file handlers will
+     * normally set it to point to a static const structure.
+     */
+DIAG_OFF_CAST_AWAY_CONST
+    return (struct supported_option_type *)arg;
+DIAG_ON_CAST_AWAY_CONST
+}
+
+WSLUA_ATTRIBUTE_GET(FileHandler,supported_comment_types,{ \
+    guint supported_comment_types = 0; \
+    for (size_t i = 0; i < obj->finfo.num_supported_blocks; i++) { \
+        size_t num_supported_options; \
+        const struct supported_option_type *supported_options;
+\
+        /* \
+         * Is this block type supported? \
+         */ \
+        if (obj->finfo.supported_blocks[i].support == BLOCK_NOT_SUPPORTED) { \
+            /* \
+             * No - skip it. \
+             */ \
+            continue; \
+        } \
+\
+        /* \
+         * Yes - what type of block is it? \
+         */ \
+        switch (obj->finfo.supported_blocks[i].type) { \
+\
+        case WTAP_BLOCK_SECTION: \
+            /* \
+             * Section block - does this block type support comments? \
+             */ \
+            num_supported_options = obj->finfo.supported_blocks[i].num_supported_options; \
+            supported_options = obj->finfo.supported_blocks[i].supported_options; \
+            for (size_t j = 0; j < num_supported_options; i++) { \
+                if (supported_options[i].opt == OPT_COMMENT) { \
+                    if (supported_options[i].support != OPTION_NOT_SUPPORTED) \
+                        supported_comment_types |= WTAP_COMMENT_PER_SECTION; \
+                    break; \
+                } \
+            } \
+            break; \
+\
+        case WTAP_BLOCK_IF_ID_AND_INFO: \
+            /* \
+             * Interface block - does this block type support comments? \
+             */ \
+            num_supported_options = obj->finfo.supported_blocks[i].num_supported_options; \
+            supported_options = obj->finfo.supported_blocks[i].supported_options; \
+            for (size_t j = 0; j < num_supported_options; i++) { \
+                if (supported_options[i].opt == OPT_COMMENT) { \
+                    if (supported_options[i].support != OPTION_NOT_SUPPORTED) \
+                        supported_comment_types |= WTAP_COMMENT_PER_INTERFACE; \
+                    break; \
+                } \
+            } \
+            break; \
+\
+        case WTAP_BLOCK_PACKET: \
+            /* \
+             * Packet block - does this block type support comments? \
+             */ \
+            num_supported_options = obj->finfo.supported_blocks[i].num_supported_options; \
+            supported_options = obj->finfo.supported_blocks[i].supported_options; \
+            for (size_t j = 0; j < num_supported_options; i++) { \
+                if (supported_options[i].opt == OPT_COMMENT) { \
+                    if (supported_options[i].support != OPTION_NOT_SUPPORTED) \
+                        supported_comment_types |= WTAP_COMMENT_PER_PACKET; \
+                    break; \
+                } \
+            } \
+            break; \
+\
+        default: \
+            break;\
+        } \
+    } \
+    lua_pushnumber(L, (lua_Number)supported_comment_types); \
+});
+WSLUA_ATTRIBUTE_SET(FileHandler,supported_comment_types, { \
+    guint supported_comment_types; \
+    size_t num_supported_options; \
+    struct supported_option_type *supported_options; \
+    if (!lua_isnumber(L,-1) ) \
+        return luaL_error(L, "FileHandler's attribute`supported_comment_types' must be a number"); \
+    supported_comment_types = wslua_toguint(L,-1); \
+    /* \
+     * Update support for comments in the relevant block types; the entries \
+     * for comments in those types should be there. \
+     */ \
+    for (size_t i = 0; i < obj->finfo.num_supported_blocks; i++) { \
+\
+        /* \
+         * Is this block type supported? \
+         */ \
+        if (obj->finfo.supported_blocks[i].support == BLOCK_NOT_SUPPORTED) { \
+            /* \
+             * No - skip it. \
+             */ \
+            continue; \
+        } \
+\
+        /* \
+         * Yes - what type of block is it? \
+         */ \
+        switch (obj->finfo.supported_blocks[i].type) { \
+\
+        case WTAP_BLOCK_SECTION: \
+            /* \
+             * Section block - update the comment support. \
+             */ \
+            num_supported_options = obj->finfo.supported_blocks[i].num_supported_options; \
+            supported_options = safe_cast_away_option_type_const(obj->finfo.supported_blocks[i].supported_options); \
+            for (size_t j = 0; j < num_supported_options; i++) { \
+                if (supported_options[i].opt == OPT_COMMENT) { \
+                    supported_options[i].support = \
+                        (supported_comment_types &= WTAP_COMMENT_PER_SECTION) ? \
+                            ONE_OPTION_SUPPORTED : OPTION_NOT_SUPPORTED ; \
+                    break; \
+                } \
+            } \
+            break; \
+\
+        case WTAP_BLOCK_IF_ID_AND_INFO: \
+            /* \
+             * Interface block - does this block type support comments? \
+             */ \
+            num_supported_options = obj->finfo.supported_blocks[i].num_supported_options; \
+            supported_options = safe_cast_away_option_type_const(obj->finfo.supported_blocks[i].supported_options); \
+            for (size_t j = 0; j < num_supported_options; i++) { \
+                if (supported_options[i].opt == OPT_COMMENT) { \
+                    supported_options[i].support = \
+                        (supported_comment_types &= WTAP_COMMENT_PER_INTERFACE) ? \
+                            ONE_OPTION_SUPPORTED : OPTION_NOT_SUPPORTED ; \
+                    break; \
+                } \
+            } \
+            break; \
+\
+        case WTAP_BLOCK_PACKET: \
+            /* \
+             * Packet block - does this block type support comments? \
+             */ \
+            num_supported_options = obj->finfo.supported_blocks[i].num_supported_options; \
+            supported_options = safe_cast_away_option_type_const(obj->finfo.supported_blocks[i].supported_options); \
+            for (size_t j = 0; j < num_supported_options; i++) { \
+                if (supported_options[i].opt == OPT_COMMENT) { \
+                    supported_options[i].support = \
+                        (supported_comment_types &= WTAP_COMMENT_PER_PACKET) ? \
+                            ONE_OPTION_SUPPORTED : OPTION_NOT_SUPPORTED ; \
+                    break; \
+                } \
+            } \
+            break; \
+\
+        default: \
+            break;\
+        } \
+    } \
+});
+
+/* This table is ultimately registered as a sub-table of the class' metatable,
+ * and if __index/__newindex is invoked then it calls the appropriate function
+ * from this table for getting/setting the members.
+ */
+WSLUA_ATTRIBUTES FileHandler_attributes[] = {
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,read_open),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,read),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,seek_read),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,read_close),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,seq_read_close),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,can_write_encap),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,write_open),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,write),
+    WSLUA_ATTRIBUTE_WOREG(FileHandler,write_close),
+    WSLUA_ATTRIBUTE_ROREG(FileHandler,type),
+    WSLUA_ATTRIBUTE_RWREG(FileHandler,extensions),
+    WSLUA_ATTRIBUTE_RWREG(FileHandler,writing_must_seek),
+    WSLUA_ATTRIBUTE_RWREG(FileHandler,writes_name_resolution),
+    WSLUA_ATTRIBUTE_RWREG(FileHandler,supported_comment_types),
+    { NULL, NULL, NULL }
+};
+
+WSLUA_METHODS FileHandler_methods[] = {
+    WSLUA_CLASS_FNREG(FileHandler,new),
+    { NULL, NULL }
+};
+
+WSLUA_META FileHandler_meta[] = {
+    WSLUA_CLASS_MTREG(FileHandler,tostring),
+    { NULL, NULL }
+};
+
+int FileHandler_register(lua_State* L) {
+    WSLUA_REGISTER_CLASS_WITH_ATTRS(FileHandler);
+    return 0;
+}
+
+int wslua_deregister_filehandlers(lua_State* L _U_) {
+    for (GSList *it = registered_file_handlers; it; it = it->next) {
+        FileHandler fh = (FileHandler)it->data;
+        wslua_deregister_filehandler_work(fh);
+
+        for (size_t i = 0; i < fh->finfo.num_supported_blocks; i++) {
+            g_free((struct supported_option_type *)fh->finfo.supported_blocks[i].supported_options);
+        }
+        g_free((struct supported_block_type  *)fh->finfo.supported_blocks);
+        g_free((char *)fh->extensions);
+        g_free((char *)fh->internal_description);
+        g_free((char *)fh->finfo.description);
+        g_free((char *)fh->finfo.name);
+        g_free(fh->type);
+
+        memset(fh, 0, sizeof(*fh));
+        fh->removed = TRUE;
+        proto_add_deregistered_data(fh);
+    }
+    g_slist_free(registered_file_handlers);
+    registered_file_handlers = NULL;
+    return 0;
+}
+
+
+/*
+ * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
+ *
+ * Local variables:
+ * c-basic-offset: 4
+ * tab-width: 8
+ * indent-tabs-mode: nil
+ * End:
+ *
+ * vi: set shiftwidth=4 tabstop=8 expandtab:
+ * :indentSize=4:tabSize=8:noTabs=true:
+ */