Adding upstream version 4.2.2.upstream/4.2.2

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1080 insertions, 0 deletions

diff --git a/text2pcap.c b/text2pcap.c
new file mode 100644
index 0000000..aa3a279
--- /dev/null
+++ b/text2pcap.c
@@ -0,0 +1,1080 @@
+/**-*-C-*-**********************************************************************
+ *
+ * text2pcap.c
+ *
+ * Utility to convert an ASCII hexdump into a libpcap-format capture file
+ *
+ * (c) Copyright 2001 Ashok Narayanan <ashokn@cisco.com>
+ *
+ * Wireshark - Network traffic analyzer
+ * By Gerald Combs <gerald@wireshark.org>
+ * Copyright 1998 Gerald Combs
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ *******************************************************************************/
+
+/*******************************************************************************
+ *
+ * This utility reads in an ASCII hexdump of this common format:
+ *
+ * 00000000  00 E0 1E A7 05 6F 00 10 5A A0 B9 12 08 00 46 00 .....o..Z.....F.
+ * 00000010  03 68 00 00 00 00 0A 2E EE 33 0F 19 08 7F 0F 19 .h.......3......
+ * 00000020  03 80 94 04 00 00 10 01 16 A2 0A 00 03 50 00 0C .............P..
+ * 00000030  01 01 0F 19 03 80 11 01 1E 61 00 0C 03 01 0F 19 .........a......
+ *
+ * Each bytestring line consists of an offset, one or more bytes, and
+ * text at the end. An offset is defined as a hex string of more than
+ * two characters. A byte is defined as a hex string of exactly two
+ * characters. The text at the end is ignored, as is any text before
+ * the offset. Bytes read from a bytestring line are added to the
+ * current packet only if all the following conditions are satisfied:
+ *
+ * - No text appears between the offset and the bytes (any bytes appearing after
+ *   such text would be ignored)
+ *
+ * - The offset must be arithmetically correct, i.e. if the offset is 00000020,
+ *   then exactly 32 bytes must have been read into this packet before this.
+ *   If the offset is wrong, the packet is immediately terminated
+ *
+ * A packet start is signaled by a zero offset.
+ *
+ * Lines starting with #TEXT2PCAP are directives. These allow the user
+ * to embed instructions into the capture file which allows text2pcap
+ * to take some actions (e.g. specifying the encapsulation
+ * etc.). Currently no directives are implemented.
+ *
+ * Lines beginning with # which are not directives are ignored as
+ * comments. Currently all non-hexdump text is ignored by text2pcap;
+ * in the future, text processing may be added, but lines prefixed
+ * with '#' will still be ignored.
+ *
+ * The output is a libpcap packet containing Ethernet frames by
+ * default. This program takes options which allow the user to add
+ * dummy Ethernet, IP and UDP, TCP or SCTP headers to the packets in order
+ * to allow dumps of L3 or higher protocols to be decoded.
+ *
+ * Considerable flexibility is built into this code to read hexdumps
+ * of slightly different formats. For example, any text prefixing the
+ * hexdump line is dropped (including mail forwarding '>'). The offset
+ * can be any hex number of four digits or greater.
+ *
+ * This converter cannot read a single packet greater than
+ * WTAP_MAX_PACKET_SIZE_STANDARD.  The snapshot length is automatically
+ * set to WTAP_MAX_PACKET_SIZE_STANDARD.
+ */
+
+#include <config.h>
+#define WS_LOG_DOMAIN  LOG_DOMAIN_MAIN
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <wsutil/file_util.h>
+#include <cli_main.h>
+#include <wsutil/cmdarg_err.h>
+#include <ui/text_import.h>
+#include <wsutil/version_info.h>
+#include <ui/failure_message.h>
+#include <wsutil/report_message.h>
+#include <wsutil/inet_addr.h>
+#include <wsutil/cpu_info.h>
+#include <wsutil/os_version_info.h>
+#include <wsutil/privileges.h>
+#include <wsutil/strtoi.h>
+
+#include <glib.h>
+
+#include <ws_exit_codes.h>
+#include <wsutil/str_util.h>
+#include <wsutil/strnatcmp.h>
+#include <wsutil/wslog.h>
+#include <wsutil/ws_getopt.h>
+
+#include <errno.h>
+
+#include "text2pcap.h"
+
+#include "wiretap/wtap.h"
+#include "wiretap/pcap-encap.h"
+
+/*--- Options --------------------------------------------------------------------*/
+
+/* Be quiet */
+static gboolean quiet = FALSE;
+
+/* Dummy Ethernet header */
+static gboolean hdr_ethernet = FALSE;
+#if 0
+/* XXX: Maybe add custom Ethernet Address options? */
+static guint8 hdr_eth_dest_addr[6] = {0x0a, 0x02, 0x02, 0x02, 0x02, 0x02};
+static guint8 hdr_eth_src_addr[6]  = {0x0a, 0x02, 0x02, 0x02, 0x02, 0x01};
+#endif
+static guint32 hdr_ethernet_proto = 0;
+
+/* Dummy IP header */
+static gboolean hdr_ip = FALSE;
+static gboolean hdr_ipv6 = FALSE;
+static gboolean have_hdr_ip_proto = FALSE;
+static guint8 hdr_ip_proto = 0;
+
+/* Destination and source addresses for IP header */
+static guint32 hdr_ip_dest_addr = 0;
+static guint32 hdr_ip_src_addr = 0;
+static ws_in6_addr hdr_ipv6_dest_addr = {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}};
+static ws_in6_addr hdr_ipv6_src_addr  = {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}};
+
+/* Dummy UDP header */
+static gboolean hdr_udp = FALSE;
+static guint32 hdr_dest_port = 0;
+static guint32 hdr_src_port  = 0;
+
+/* Dummy TCP header */
+static gboolean hdr_tcp = FALSE;
+
+/* Dummy SCTP header */
+static gboolean hdr_sctp = FALSE;
+static guint32 hdr_sctp_src  = 0;
+static guint32 hdr_sctp_dest = 0;
+static guint32 hdr_sctp_tag  = 0;
+
+/* Dummy DATA chunk header */
+static gboolean hdr_data_chunk = FALSE;
+static guint32 hdr_data_chunk_tsn  = 0;
+static guint16 hdr_data_chunk_sid  = 0;
+static guint16 hdr_data_chunk_ssn  = 0;
+static guint32 hdr_data_chunk_ppid = 0;
+
+/* Export PDU */
+static gboolean hdr_export_pdu = FALSE;
+
+/*--- Local data -----------------------------------------------------------------*/
+
+/* This is where we store the packet currently being built */
+static guint32 max_offset = WTAP_MAX_PACKET_SIZE_STANDARD;
+
+/* Time code of packet, derived from packet_preamble */
+static int      ts_fmt_iso = 0;
+
+/* Input file */
+static char *input_filename;
+static FILE       *input_file  = NULL;
+/* Output file */
+static char *output_filename;
+
+static wtap_dumper* wdh;
+
+/*----------------------------------------------------------------------
+ * Print usage string and exit
+ */
+static void
+print_usage (FILE *output)
+{
+    fprintf(output,
+            "\n"
+            "Usage: text2pcap [options] <infile> <outfile>\n"
+            "\n"
+            "where  <infile> specifies input  filename (use - for standard input)\n"
+            "      <outfile> specifies output filename (use - for standard output)\n"
+            "\n"
+            "Input:\n"
+            "  -o hex|oct|dec|none    parse offsets as (h)ex, (o)ctal, (d)ecimal, or (n)one;\n"
+            "                         default is hex.\n"
+            "  -t <timefmt>           treat the text before the packet as a date/time code;\n"
+            "                         <timefmt> is a format string supported by strptime,\n"
+            "                         with an optional %%f descriptor for fractional seconds.\n"
+            "                         Example: The time \"10:15:14.5476\" has the format code\n"
+            "                         \"%%H:%%M:%%S.%%f\"\n"
+            "                         The special format string ISO supports ISO-8601 times.\n"
+            "                         NOTE: Date/time fields from the current date/time are\n"
+            "                         used as the default for unspecified fields.\n"
+            "  -D                     the text before the packet starts with an I or an O,\n"
+            "                         indicating that the packet is inbound or outbound.\n"
+            "                         This is used when generating dummy headers if the\n"
+            "                         output format supports it (e.g. pcapng).\n"
+            "  -a                     enable ASCII text dump identification.\n"
+            "                         The start of the ASCII text dump can be identified\n"
+            "                         and excluded from the packet data, even if it looks\n"
+            "                         like a HEX dump.\n"
+            "                         NOTE: Do not enable it if the input file does not\n"
+            "                         contain the ASCII text dump.\n"
+            "  -r <regex>             enable regex mode. Scan the input using <regex>, a Perl\n"
+            "                         compatible regular expression matching a single packet.\n"
+            "                         Named capturing subgroups are used to identify fields:\n"
+            "                         <data> (mand.), and <time>, <dir>, and <seqno> (opt.)\n"
+            "                         The time field format is taken from the -t option\n"
+            "                         Example: -r '^(?<dir>[<>])\\s(?<time>\\d+:\\d\\d:\\d\\d.\\d+)\\s(?<data>[0-9a-fA-F]+)$'\n"
+            "                         could match a file with lines like\n"
+            "                         > 0:00:00.265620 a130368b000000080060\n"
+            "                         < 0:00:00.295459 a2010800000000000000000800000000\n"
+            "  -b 2|8|16|64           encoding base (radix) of the packet data in regex mode\n"
+            "                         (def: 16: hexadecimal) No effect in hexdump mode.\n"
+            "\n"
+            "Output:\n"
+            "  -F <capture type>      set the output file type; default is pcapng.\n"
+            "                         an empty \"-F\" option will list the file types.\n"
+            "  -E <encap type>        set the output file encapsulation type; default is\n"
+            "                         ether (Ethernet). An empty \"-E\" option will list\n"
+            "                         the encapsulation types.\n"
+            "  -l <typenum>           set the output file encapsulation type via link-layer\n"
+            "                         type number; default is 1 (Ethernet). See\n"
+            "                         https://www.tcpdump.org/linktypes.html for a list of\n"
+            "                         numbers.\n"
+            "                         Example: -l 7 for ARCNet packets.\n"
+            "  -m <max-packet>        max packet length in output; default is %d\n"
+            "  -N <intf-name>         assign name to the interface in the pcapng file.\n"
+            "\n"
+            "Prepend dummy header:\n"
+            "  -e <l3pid>             prepend dummy Ethernet II header with specified L3PID\n"
+            "                         (in HEX).\n"
+            "                         Example: -e 0x806 to specify an ARP packet.\n"
+            "  -i <proto>             prepend dummy IP header with specified IP protocol\n"
+            "                         (in DECIMAL).\n"
+            "                         Automatically prepends Ethernet header as well if\n"
+            "                         link-layer type is Ethernet.\n"
+            "                         Example: -i 46\n"
+            "  -4 <srcip>,<destip>    prepend dummy IPv4 header with specified\n"
+            "                         dest and source address.\n"
+            "                         Example: -4 10.0.0.1,10.0.0.2\n"
+            "  -6 <srcip>,<destip>    prepend dummy IPv6 header with specified\n"
+            "                         dest and source address.\n"
+            "                         Example: -6 2001:db8::b3ff:fe1e:8329,2001:0db8:85a3::8a2e:0370:7334\n"
+            "  -u <srcp>,<destp>      prepend dummy UDP header with specified\n"
+            "                         source and destination ports (in DECIMAL).\n"
+            "                         Automatically prepends Ethernet & IP headers as well.\n"
+            "                         Example: -u 1000,69 to make the packets look like\n"
+            "                         TFTP/UDP packets.\n"
+            "  -T <srcp>,<destp>      prepend dummy TCP header with specified\n"
+            "                         source and destination ports (in DECIMAL).\n"
+            "                         Automatically prepends Ethernet & IP headers as well.\n"
+            "                         Example: -T 50,60\n"
+            "  -s <srcp>,<dstp>,<tag> prepend dummy SCTP header with specified\n"
+            "                         source/dest ports and verification tag (in DECIMAL).\n"
+            "                         Automatically prepends Ethernet & IP headers as well.\n"
+            "                         Example: -s 30,40,34\n"
+            "  -S <srcp>,<dstp>,<ppi> prepend dummy SCTP header with specified\n"
+            "                         source/dest ports and verification tag 0.\n"
+            "                         Automatically prepends a dummy SCTP DATA\n"
+            "                         chunk header with payload protocol identifier ppi.\n"
+            "                         Example: -S 30,40,34\n"
+            "  -P <dissector>         prepend EXPORTED_PDU header with specified dissector\n"
+            "                         as the payload DISSECTOR_NAME tag.\n"
+            "                         Automatically sets link type to Upper PDU Export.\n"
+            "                         EXPORTED_PDU payload defaults to \"data\" otherwise.\n"
+            "\n",
+            WTAP_MAX_PACKET_SIZE_STANDARD);
+
+    ws_log_print_usage(output);
+
+    fprintf(output, "\n"
+            "Miscellaneous:\n"
+            "  -h, --help             display this help and exit\n"
+            "  -v, --version          print version information and exit\n"
+            "  -q                     don't report processed packet counts\n"
+            "");
+}
+
+/*
+ * Set the hdr_ip_proto parameter, and set the flag indicate that the
+ * parameter has been specified.
+ *
+ * XXX - catch the case where two different options set it differently?
+ */
+static void
+set_hdr_ip_proto(guint8 ip_proto)
+{
+    have_hdr_ip_proto = TRUE;
+    hdr_ip_proto = ip_proto;
+}
+
+static void
+list_capture_types(void) {
+    GArray *writable_type_subtypes;
+
+    cmdarg_err("The available capture file types for the \"-F\" flag are:\n");
+    writable_type_subtypes = wtap_get_writable_file_types_subtypes(FT_SORT_BY_NAME);
+    for (guint i = 0; i < writable_type_subtypes->len; i++) {
+        int ft = g_array_index(writable_type_subtypes, int, i);
+        fprintf(stderr, "    %s - %s\n", wtap_file_type_subtype_name(ft),
+            wtap_file_type_subtype_description(ft));
+    }
+    g_array_free(writable_type_subtypes, TRUE);
+}
+
+struct string_elem {
+    const char *sstr;   /* The short string */
+    const char *lstr;   /* The long string */
+};
+
+static gint
+string_nat_compare(gconstpointer a, gconstpointer b)
+{
+    return ws_ascii_strnatcmp(((const struct string_elem *)a)->sstr,
+        ((const struct string_elem *)b)->sstr);
+}
+
+static void
+string_elem_print(gpointer data, gpointer stream_ptr)
+{
+    fprintf((FILE *) stream_ptr, "    %s - %s\n",
+        ((struct string_elem *)data)->sstr,
+        ((struct string_elem *)data)->lstr);
+}
+
+static void
+list_encap_types(void) {
+    int i;
+    struct string_elem *encaps;
+    GSList *list = NULL;
+
+    encaps = g_new(struct string_elem, wtap_get_num_encap_types());
+    cmdarg_err("The available encapsulation types for the \"-E\" flag are:\n");
+    for (i = 0; i < wtap_get_num_encap_types(); i++) {
+        /* Exclude wtap encapsulations that require a pseudo header,
+         * because we won't setup one from the text we import and
+         * wiretap doesn't allow us to write 'raw' frames
+         */
+        if (!wtap_encap_requires_phdr(i)) {
+            encaps[i].sstr = wtap_encap_name(i);
+            if (encaps[i].sstr != NULL) {
+                encaps[i].lstr = wtap_encap_description(i);
+                list = g_slist_insert_sorted(list, &encaps[i], string_nat_compare);
+            }
+        }
+    }
+    g_slist_foreach(list, string_elem_print, stderr);
+    g_slist_free(list);
+    g_free(encaps);
+}
+
+static void
+cleanup_dump_params(wtap_dump_params *params)
+{
+    wtap_free_idb_info(params->idb_inf);
+    wtap_dump_params_cleanup(params);
+}
+
+/*----------------------------------------------------------------------
+ * Parse CLI options
+ */
+static int
+parse_options(int argc, char *argv[], text_import_info_t * const info, wtap_dump_params * const params)
+{
+    int   ret;
+    int   c;
+    char *p;
+    static const struct ws_option long_options[] = {
+        {"help", ws_no_argument, NULL, 'h'},
+        {"version", ws_no_argument, NULL, 'v'},
+        {0, 0, 0, 0 }
+    };
+    const char *interface_name = NULL;
+    /* Link-layer type; see https://www.tcpdump.org/linktypes.html for details */
+    guint32 pcap_link_type = 1;   /* Default is LINKTYPE_ETHERNET */
+    int file_type_subtype = WTAP_FILE_TYPE_SUBTYPE_UNKNOWN;
+    int wtap_encap_type = WTAP_ENCAP_ETHERNET;
+    int err;
+    char* err_info;
+    GError* gerror = NULL;
+    GRegex* regex = NULL;
+
+    info->mode = TEXT_IMPORT_HEXDUMP;
+    info->hexdump.offset_type = OFFSET_HEX;
+    info->regex.encoding = ENCODING_PLAIN_HEX;
+    info->payload = "data";
+
+    /* Initialize the version information. */
+    ws_init_version_info("Text2pcap", NULL, NULL);
+
+    /* Scan CLI parameters */
+    while ((c = ws_getopt_long(argc, argv, "hqab:De:E:F:i:l:m:nN:o:u:P:r:s:S:t:T:v4:6:", long_options, NULL)) != -1) {
+        switch (c) {
+        case 'h':
+            show_help_header("Generate a capture file from an ASCII hexdump of packets.");
+            print_usage(stdout);
+            exit(0);
+            break;
+        case 'q': quiet = TRUE; break;
+        case 'a': info->hexdump.identify_ascii = TRUE; break;
+        case 'D': info->hexdump.has_direction = TRUE; break;
+        case 'l':
+            pcap_link_type = (guint32)strtol(ws_optarg, NULL, 0);
+            wtap_encap_type = wtap_pcap_encap_to_wtap_encap(pcap_link_type);
+            break;
+        case 'm': max_offset = (guint32)strtol(ws_optarg, NULL, 0); break;
+        case 'n': cmdarg_err("'-n' is deprecated; the output format already defaults to pcapng."); break;
+        case 'N': interface_name = ws_optarg; break;
+        case 'b':
+        {
+            guint8 radix;
+            if (!ws_strtou8(ws_optarg, NULL, &radix)) {
+                cmdarg_err("Bad argument for '-b': %s", ws_optarg);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            switch (radix) {
+            case  2: info->regex.encoding = ENCODING_PLAIN_BIN; break;
+            case  8: info->regex.encoding = ENCODING_PLAIN_OCT; break;
+            case 16: info->regex.encoding = ENCODING_PLAIN_HEX; break;
+            case 64: info->regex.encoding = ENCODING_BASE64; break;
+            default:
+                cmdarg_err("Bad argument for '-b': %s", ws_optarg);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            break;
+        }
+
+        case 'o':
+            if (ws_optarg[0] != 'h' && ws_optarg[0] != 'o' && ws_optarg[0] != 'd' && ws_optarg[0] != 'n') {
+                cmdarg_err("Bad argument for '-o': %s", ws_optarg);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            switch (ws_optarg[0]) {
+            case 'o': info->hexdump.offset_type = OFFSET_OCT; break;
+            case 'h': info->hexdump.offset_type = OFFSET_HEX; break;
+            case 'd': info->hexdump.offset_type = OFFSET_DEC; break;
+            case 'n': info->hexdump.offset_type = OFFSET_NONE; break;
+            }
+            break;
+
+        case 'e':
+            hdr_ethernet = TRUE;
+            if (sscanf(ws_optarg, "%x", &hdr_ethernet_proto) < 1) {
+                cmdarg_err("Bad argument for '-e': %s", ws_optarg);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            break;
+
+        case 'E':
+            wtap_encap_type = wtap_name_to_encap(ws_optarg);
+            if (wtap_encap_type < 0) {
+                cmdarg_err("\"%s\" isn't a valid encapsulation type", ws_optarg);
+                list_encap_types();
+                return WS_EXIT_INVALID_OPTION;
+            }
+            break;
+
+        case 'F':
+            file_type_subtype = wtap_name_to_file_type_subtype(ws_optarg);
+            if  (file_type_subtype < 0) {
+                cmdarg_err("\"%s\" isn't a valid capture file type", ws_optarg);
+                list_capture_types();
+                return WS_EXIT_INVALID_OPTION;
+            }
+            break;
+
+        case 'i':
+        {
+            guint8 ip_proto;
+            if (!ws_strtou8(ws_optarg, NULL, &ip_proto)) {
+                cmdarg_err("Bad argument for '-i': %s", ws_optarg);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            set_hdr_ip_proto(ip_proto);
+            break;
+        }
+
+        case 'P':
+            hdr_export_pdu = TRUE;
+            info->payload = ws_optarg;
+            break;
+
+        case 'r':
+            info->mode = TEXT_IMPORT_REGEX;
+            if (regex != NULL) {
+                /* XXX: Used the option twice. Should we warn? */
+                g_regex_unref(regex);
+            }
+            regex = g_regex_new(ws_optarg, G_REGEX_DUPNAMES | G_REGEX_OPTIMIZE | G_REGEX_MULTILINE, G_REGEX_MATCH_NOTEMPTY, &gerror);
+            if (gerror) {
+                cmdarg_err("%s", gerror->message);
+                g_error_free(gerror);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            } else {
+                if (g_regex_get_string_number(regex, "data") == -1) {
+                    cmdarg_err("Regex missing capturing group data (use (?<data>(...)) )");
+                    g_regex_unref(regex);
+                    print_usage(stderr);
+                    return WS_EXIT_INVALID_OPTION;
+                }
+            }
+            break;
+
+        case 's':
+            hdr_sctp = TRUE;
+            hdr_data_chunk = FALSE;
+            hdr_tcp = FALSE;
+            hdr_udp = FALSE;
+            hdr_sctp_src   = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || (*p != ',' && *p != '\0')) {
+                cmdarg_err("Bad src port for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            if (*p == '\0') {
+                cmdarg_err("No dest port specified for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            p++;
+            ws_optarg = p;
+            hdr_sctp_dest = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || (*p != ',' && *p != '\0')) {
+                cmdarg_err("Bad dest port for '-s'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            if (*p == '\0') {
+                cmdarg_err("No tag specified for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            p++;
+            ws_optarg = p;
+            hdr_sctp_tag = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || *p != '\0') {
+                cmdarg_err("Bad tag for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+
+            set_hdr_ip_proto(132);
+            break;
+
+        case 'S':
+            hdr_sctp = TRUE;
+            hdr_data_chunk = TRUE;
+            hdr_tcp = FALSE;
+            hdr_udp = FALSE;
+            hdr_sctp_src   = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || (*p != ',' && *p != '\0')) {
+                cmdarg_err("Bad src port for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            if (*p == '\0') {
+                cmdarg_err("No dest port specified for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            p++;
+            ws_optarg = p;
+            hdr_sctp_dest = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || (*p != ',' && *p != '\0')) {
+                cmdarg_err("Bad dest port for '-s'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            if (*p == '\0') {
+                cmdarg_err("No ppi specified for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            p++;
+            ws_optarg = p;
+            hdr_data_chunk_ppid = (guint32)strtoul(ws_optarg, &p, 10);
+            if (p == ws_optarg || *p != '\0') {
+                cmdarg_err("Bad ppi for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+
+            set_hdr_ip_proto(132);
+            break;
+
+        case 't':
+            info->timestamp_format = ws_optarg;
+            if (!strcmp(ws_optarg, "ISO"))
+              ts_fmt_iso = 1;
+            break;
+
+        case 'u':
+            hdr_udp = TRUE;
+            hdr_tcp = FALSE;
+            hdr_sctp = FALSE;
+            hdr_data_chunk = FALSE;
+            hdr_src_port = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || (*p != ',' && *p != '\0')) {
+                cmdarg_err("Bad src port for '-u'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            if (*p == '\0') {
+                cmdarg_err("No dest port specified for '-u'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            p++;
+            ws_optarg = p;
+            hdr_dest_port = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || *p != '\0') {
+                cmdarg_err("Bad dest port for '-u'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            set_hdr_ip_proto(17);
+            break;
+
+        case 'T':
+            hdr_tcp = TRUE;
+            hdr_udp = FALSE;
+            hdr_sctp = FALSE;
+            hdr_data_chunk = FALSE;
+            hdr_src_port = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || (*p != ',' && *p != '\0')) {
+                cmdarg_err("Bad src port for '-T'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            if (*p == '\0') {
+                cmdarg_err("No dest port specified for '-u'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            p++;
+            ws_optarg = p;
+            hdr_dest_port = (guint32)strtol(ws_optarg, &p, 10);
+            if (p == ws_optarg || *p != '\0') {
+                cmdarg_err("Bad dest port for '-T'");
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+            set_hdr_ip_proto(6);
+            break;
+
+        case 'v':
+            show_version();
+            exit(0);
+            break;
+
+        case '4':
+        case '6':
+            p = strchr(ws_optarg, ',');
+
+            if (!p) {
+                cmdarg_err("Bad source param addr for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+
+            *p = '\0';
+            if (c == '6')
+            {
+                hdr_ipv6 = TRUE;
+                hdr_ip   = FALSE;
+            }
+            else
+            {
+                hdr_ip   = TRUE;
+                hdr_ipv6 = FALSE;
+            }
+            hdr_ethernet = TRUE;
+
+            if (hdr_ipv6 == TRUE) {
+                if (!ws_inet_pton6(ws_optarg, &hdr_ipv6_src_addr)) {
+                        cmdarg_err("Bad src addr -%c '%s'", c, p);
+                        print_usage(stderr);
+                        return WS_EXIT_INVALID_OPTION;
+                }
+            } else {
+                if (!ws_inet_pton4(ws_optarg, &hdr_ip_src_addr)) {
+                        cmdarg_err("Bad src addr -%c '%s'", c, p);
+                        print_usage(stderr);
+                        return WS_EXIT_INVALID_OPTION;
+                }
+            }
+
+            p++;
+            if (*p == '\0') {
+                cmdarg_err("No dest addr specified for '-%c'", c);
+                print_usage(stderr);
+                return WS_EXIT_INVALID_OPTION;
+            }
+
+            if (hdr_ipv6 == TRUE) {
+                if (!ws_inet_pton6(p, &hdr_ipv6_dest_addr)) {
+                        cmdarg_err("Bad dest addr for -%c '%s'", c, p);
+                        print_usage(stderr);
+                        return WS_EXIT_INVALID_OPTION;
+                }
+            } else {
+                if (!ws_inet_pton4(p, &hdr_ip_dest_addr)) {
+                        cmdarg_err("Bad dest addr for -%c '%s'", c, p);
+                        print_usage(stderr);
+                        return WS_EXIT_INVALID_OPTION;
+                }
+            }
+            break;
+
+
+        case '?':
+            switch(ws_optopt) {
+            case 'E':
+                list_encap_types();
+                return WS_EXIT_INVALID_OPTION;
+                break;
+            case 'F':
+                list_capture_types();
+                return WS_EXIT_INVALID_OPTION;
+                break;
+            }
+            /* FALLTHROUGH */
+
+        default:
+            print_usage(stderr);
+            return WS_EXIT_INVALID_OPTION;
+        }
+    }
+
+    if (ws_optind >= argc || argc-ws_optind < 2) {
+        cmdarg_err("Must specify input and output filename");
+        print_usage(stderr);
+        return WS_EXIT_INVALID_OPTION;
+    }
+
+    if (max_offset > WTAP_MAX_PACKET_SIZE_STANDARD) {
+        cmdarg_err("Maximum packet length cannot be more than %d bytes",
+                WTAP_MAX_PACKET_SIZE_STANDARD);
+        return WS_EXIT_INVALID_OPTION;
+    }
+
+    /* Some validation */
+
+    if (info->mode == TEXT_IMPORT_REGEX) {
+        info->regex.format = regex;
+        /* need option for data encoding */
+        if (g_regex_get_string_number(regex, "dir") > -1) {
+            /* XXX: Add parameter(s?) to specify these? */
+            info->regex.in_indication = "iI<";
+            info->regex.out_indication = "oO>";
+        }
+        if (g_regex_get_string_number(regex, "time") > -1 && info->timestamp_format == NULL) {
+            cmdarg_err("Regex with <time> capturing group requires time format (-t)");
+            return WS_EXIT_INVALID_OPTION;
+        }
+    }
+
+    if (have_hdr_ip_proto && !(hdr_ip || hdr_ipv6)) {
+        /*
+         * If we have an IP protocol to add to the header, but neither an
+         * IPv4 nor an IPv6 header was specified,  add an IPv4 header.
+         */
+        hdr_ip = TRUE;
+    }
+
+    if (!have_hdr_ip_proto && (hdr_ip || hdr_ipv6)) {
+        /* if -4 or -6 option is specified without an IP protocol then fail */
+        cmdarg_err("IP protocol requires a next layer protocol number");
+        return WS_EXIT_INVALID_OPTION;
+    }
+
+    if ((hdr_tcp || hdr_udp || hdr_sctp) && !(hdr_ip || hdr_ipv6)) {
+        /*
+         * If TCP (-T), UDP (-u) or SCTP (-s/-S) header options are specified
+         * but none of IPv4 (-4) or IPv6 (-6) options then add an IPv4 header
+         */
+        hdr_ip = TRUE;
+    }
+
+    if (hdr_export_pdu && wtap_encap_type != WTAP_ENCAP_WIRESHARK_UPPER_PDU) {
+        cmdarg_err("Export PDU (-P) requires WIRESHARK_UPPER_PDU link type (252)");
+        return WS_EXIT_INVALID_OPTION;
+    }
+
+    /* The other dummy headers require a IPv4 or IPv6 header. Allow
+     * encapsulation types of Ethernet (and add a Ethernet header in that
+     * case if we haven't already), or the appropriate raw IP types.
+     */
+    if (hdr_ip) {
+        switch (wtap_encap_type) {
+
+        case (WTAP_ENCAP_ETHERNET):
+            hdr_ethernet = TRUE;
+            hdr_ethernet_proto = 0x0800;
+            break;
+
+        case (WTAP_ENCAP_RAW_IP):
+        case (WTAP_ENCAP_RAW_IP4):
+            break;
+
+        default:
+            cmdarg_err("Dummy IPv4 header not supported with encapsulation %s (%s)", wtap_encap_description(wtap_encap_type), wtap_encap_name(wtap_encap_type));
+            return WS_EXIT_INVALID_OPTION;
+        }
+    } else if (hdr_ipv6) {
+        switch (wtap_encap_type) {
+
+        case (WTAP_ENCAP_ETHERNET):
+            hdr_ethernet = TRUE;
+            hdr_ethernet_proto = 0x86DD;
+            break;
+
+        case (WTAP_ENCAP_RAW_IP):
+        case (WTAP_ENCAP_RAW_IP6):
+            break;
+
+        default:
+            cmdarg_err("Dummy IPv6 header not supported with encapsulation %s (%s)", wtap_encap_description(wtap_encap_type), wtap_encap_name(wtap_encap_type));
+            return WS_EXIT_INVALID_OPTION;
+        }
+    }
+
+    if (strcmp(argv[ws_optind], "-") != 0) {
+        input_filename = argv[ws_optind];
+        if (info->mode == TEXT_IMPORT_REGEX) {
+            info->regex.import_text_GMappedFile = g_mapped_file_new(input_filename, TRUE, &gerror);
+            if (gerror) {
+                cmdarg_err("%s", gerror->message);
+                g_error_free(gerror);
+                return WS_EXIT_OPEN_ERROR;
+            }
+        } else {
+            input_file = ws_fopen(input_filename, "rb");
+            if (!input_file) {
+                open_failure_message(input_filename, errno, FALSE);
+                return WS_EXIT_OPEN_ERROR;
+            }
+        }
+    } else {
+        if (info->mode == TEXT_IMPORT_REGEX) {
+            /* text_import_regex requires a memory mapped file, so this likely
+             * won't work, unless the user has redirected a file (not a FIFO)
+             * to stdin, though that's pretty silly and unnecessary.
+             * XXX: We could read until EOF, write it to a temp file, and then
+             * mmap that (ugh)?
+             */
+            info->regex.import_text_GMappedFile = g_mapped_file_new_from_fd(0, TRUE, &gerror);
+            if (gerror) {
+                cmdarg_err("%s", gerror->message);
+                cmdarg_err("regex import requires memory-mapped I/O and cannot be used with terminals or pipes");
+                g_error_free(gerror);
+                return WS_EXIT_INVALID_OPTION;
+            }
+        }
+        input_filename = "Standard input";
+        input_file = stdin;
+    }
+
+    params->encap = wtap_encap_type;
+    params->snaplen = max_offset;
+    if (file_type_subtype == WTAP_FILE_TYPE_SUBTYPE_UNKNOWN) {
+        file_type_subtype = wtap_pcapng_file_type_subtype();
+    }
+    /* Request nanosecond precision. Most file formats only support one time
+     * precision and ignore this parameter (and the related options in the
+     * generated IDB), but it affects pcapng.
+     */
+    params->tsprec = WTAP_TSPREC_NSEC;
+    if ((ret = text_import_pre_open(params, file_type_subtype, input_filename, interface_name)) != EXIT_SUCCESS) {
+        cleanup_dump_params(params);
+        return ret;
+    }
+
+    if (strcmp(argv[ws_optind+1], "-") != 0) {
+        /* Write to a file.  Open the file. */
+        output_filename = argv[ws_optind+1];
+        wdh = wtap_dump_open(output_filename, file_type_subtype, WTAP_UNCOMPRESSED, params, &err, &err_info);
+    } else {
+        /* Write to the standard output. */
+        output_filename = "Standard output";
+        wdh = wtap_dump_open_stdout(file_type_subtype, WTAP_UNCOMPRESSED, params, &err, &err_info);
+    }
+
+    if (!wdh) {
+        cfile_dump_open_failure_message(output_filename, err, err_info,
+                                        file_type_subtype);
+        cleanup_dump_params(params);
+        return WS_EXIT_OPEN_ERROR;
+    }
+
+    info->import_text_filename = input_filename;
+    info->output_filename = output_filename;
+    info->hexdump.import_text_FILE = input_file;
+
+    info->encapsulation = wtap_encap_type;
+    info->wdh = wdh;
+
+    if (hdr_export_pdu) {
+        info->dummy_header_type = HEADER_EXPORT_PDU;
+    } else if (hdr_data_chunk) {
+        info->dummy_header_type = HEADER_SCTP_DATA;
+    } else if (hdr_sctp) {
+        info->dummy_header_type = HEADER_SCTP;
+    } else if (hdr_tcp) {
+        info->dummy_header_type = HEADER_TCP;
+    } else if (hdr_udp) {
+        info->dummy_header_type = HEADER_UDP;
+    } else if (hdr_ip) {
+        info->dummy_header_type = HEADER_IPV4;
+    } else if (hdr_ipv6) {
+        info->dummy_header_type = HEADER_IPV4;
+    } else if (hdr_ethernet) {
+        info->dummy_header_type = HEADER_ETH;
+    } else {
+        info->dummy_header_type = HEADER_NONE;
+    }
+    info->pid = hdr_ethernet_proto;
+    if (hdr_ip) {
+        info->ip_src_addr.ipv4 = hdr_ip_src_addr;
+        info->ip_dest_addr.ipv4 = hdr_ip_dest_addr;
+    } else if (hdr_ipv6) {
+        info->ipv6 = TRUE;
+        info->ip_src_addr.ipv6 = hdr_ipv6_src_addr;
+        info->ip_dest_addr.ipv6 = hdr_ipv6_dest_addr;
+    }
+    info->protocol = hdr_ip_proto;
+    if (hdr_sctp) {
+        info->src_port = hdr_sctp_src;
+        info->dst_port = hdr_sctp_dest;
+    } else {
+        info->src_port = hdr_src_port;
+        info->dst_port = hdr_dest_port;
+    }
+    info->tag = hdr_sctp_tag;
+    info->ppi = hdr_data_chunk_ppid;
+
+    info->max_frame_length = max_offset;
+
+    /* Display summary of our state */
+    if (!quiet) {
+        fprintf(stderr, "Input from: %s\n", input_filename);
+        fprintf(stderr, "Output to: %s\n",  output_filename);
+        fprintf(stderr, "Output format: %s\n", wtap_file_type_subtype_name(file_type_subtype));
+        if (hdr_ethernet) fprintf(stderr, "Generate dummy Ethernet header: Protocol: 0x%0X\n",
+                                  hdr_ethernet_proto);
+        if (hdr_ip) fprintf(stderr, "Generate dummy IP header: Protocol: %u\n",
+                            hdr_ip_proto);
+        if (hdr_ipv6) fprintf(stderr, "Generate dummy IPv6 header: Protocol: %u\n",
+                            hdr_ip_proto);
+        if (hdr_udp) fprintf(stderr, "Generate dummy UDP header: Source port: %u. Dest port: %u\n",
+                             hdr_src_port, hdr_dest_port);
+        if (hdr_tcp) fprintf(stderr, "Generate dummy TCP header: Source port: %u. Dest port: %u\n",
+                             hdr_src_port, hdr_dest_port);
+        if (hdr_sctp) fprintf(stderr, "Generate dummy SCTP header: Source port: %u. Dest port: %u. Tag: %u\n",
+                              hdr_sctp_src, hdr_sctp_dest, hdr_sctp_tag);
+        if (hdr_data_chunk) fprintf(stderr, "Generate dummy DATA chunk header: TSN: %u. SID: %u. SSN: %u. PPID: %u\n",
+                                    hdr_data_chunk_tsn, hdr_data_chunk_sid, hdr_data_chunk_ssn, hdr_data_chunk_ppid);
+    }
+
+    return EXIT_SUCCESS;
+}
+
+/*
+ * General errors and warnings are reported with an console message
+ * in text2pcap.
+ */
+static void
+text2pcap_cmdarg_err(const char *msg_format, va_list ap)
+{
+    fprintf(stderr, "text2pcap: ");
+    vfprintf(stderr, msg_format, ap);
+    fprintf(stderr, "\n");
+}
+
+/*
+ * Report additional information for an error in command-line arguments.
+ */
+static void
+text2pcap_cmdarg_err_cont(const char *msg_format, va_list ap)
+{
+    vfprintf(stderr, msg_format, ap);
+    fprintf(stderr, "\n");
+}
+
+int
+main(int argc, char *argv[])
+{
+    static const struct report_message_routines text2pcap_report_routines = {
+        failure_message,
+        failure_message,
+        open_failure_message,
+        read_failure_message,
+        write_failure_message,
+        cfile_open_failure_message,
+        cfile_dump_open_failure_message,
+        cfile_read_failure_message,
+        cfile_write_failure_message,
+        cfile_close_failure_message
+    };
+    int ret = EXIT_SUCCESS;
+    text_import_info_t info;
+    wtap_dump_params params;
+    guint64 bytes_written;
+
+    cmdarg_err_init(text2pcap_cmdarg_err, text2pcap_cmdarg_err_cont);
+
+    /* Initialize log handler early so we can have proper logging during startup. */
+    ws_log_init("text2pcap", vcmdarg_err);
+
+    /* Early logging command-line initialization. */
+    ws_log_parse_args(&argc, argv, vcmdarg_err, WS_EXIT_INVALID_OPTION);
+
+    ws_noisy("Finished log init and parsing command line log arguments");
+
+#ifdef _WIN32
+    create_app_running_mutex();
+#endif /* _WIN32 */
+
+    init_process_policies();
+    init_report_message("text2pcap", &text2pcap_report_routines);
+    wtap_init(TRUE);
+
+    memset(&info, 0, sizeof(info));
+    wtap_dump_params_init(&params, NULL);
+    if ((ret = parse_options(argc, argv, &info, &params)) != EXIT_SUCCESS) {
+        goto clean_exit;
+    }
+
+    ws_assert(input_file != NULL || info.regex.import_text_GMappedFile != NULL);
+    ws_assert(wdh != NULL);
+
+    ret = text_import(&info);
+
+    if (ws_log_get_level() >= LOG_LEVEL_DEBUG)
+        fprintf(stderr, "\n-------------------------\n");
+    if (!quiet) {
+        bytes_written = wtap_get_bytes_dumped(wdh);
+        fprintf(stderr, "Read %u potential packet%s, wrote %u packet%s (%" PRIu64 " byte%s including overhead).\n",
+                info.num_packets_read, plurality(info.num_packets_read, "", "s"),
+                info.num_packets_written, plurality(info.num_packets_written, "", "s"),
+                bytes_written, plurality(bytes_written, "", "s"));
+    }
+clean_exit:
+    if (input_file) {
+        fclose(input_file);
+    }
+    if (info.regex.import_text_GMappedFile) {
+        g_mapped_file_unref(info.regex.import_text_GMappedFile);
+    }
+    if (info.regex.format) {
+        g_regex_unref(info.regex.format);
+    }
+    if (wdh) {
+        int err;
+        char *err_info;
+        if (!wtap_dump_close(wdh, NULL, &err, &err_info)) {
+            cfile_close_failure_message(output_filename, err, err_info);
+            ret = 2;
+        }
+    }
+    cleanup_dump_params(&params);
+    return ret;
+}
+
+/*
+ * Editor modelines  -  https://www.wireshark.org/tools/modelines.html
+ *
+ * Local variables:
+ * c-basic-offset: 4
+ * tab-width: 8
+ * indent-tabs-mode: nil
+ * End:
+ *
+ * vi: set shiftwidth=4 tabstop=8 expandtab:
+ * :indentSize=4:tabSize=8:noTabs=true:
+ */