diff options
Diffstat (limited to '')
| -rwxr-xr-x | tools/macos-setup.sh | 3865 |
1 files changed, 3865 insertions, 0 deletions
diff --git a/tools/macos-setup.sh b/tools/macos-setup.sh new file mode 100755 index 0000000..ec25bf7 --- /dev/null +++ b/tools/macos-setup.sh @@ -0,0 +1,3865 @@ +#!/bin/bash +# Setup development environment on macOS (tested with 10.6.8 and Xcode +# 3.2.6 and with 10.12.4 and Xcode 8.3). +# +# Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file) +# +# Wireshark - Network traffic analyzer +# By Gerald Combs <gerald@wireshark.org> +# Copyright 1998 Gerald Combs +# +# SPDX-License-Identifier: GPL-2.0-or-later + +shopt -s extglob + +# +# Get the major version of Darwin, so we can check the major macOS +# version. +# +DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'` + +# +# The minimum supported version of Qt is 5.9, so the minimum supported version +# of macOS is OS X 10.10 (Yosemite), aka Darwin 14.0. +# +if [[ $DARWIN_MAJOR_VERSION -lt 14 ]]; then + echo "This script does not support any versions of macOS before Yosemite" 1>&2 + exit 1 +fi + +# +# Get the processor architecture of Darwin. Currently supported: arm, i386 +# +DARWIN_PROCESSOR_ARCH=`uname -p` + +if [ "$DARWIN_PROCESSOR_ARCH" != "arm" -a "$DARWIN_PROCESSOR_ARCH" != "i386" ]; then + echo "This script does not support this processor architecture" 1>&2 + exit 1 +fi + +# +# Versions of packages to download and install. +# + +# +# We use curl, but older versions of curl in older macOS releases can't +# handle some sites - including the xz site. +# +# If the version of curl in the system is older than 7.54.0, download +# curl and install it. +# +current_curl_version=`curl --version | sed -n 's/curl \([0-9.]*\) .*/\1/p'` +current_curl_major_version="`expr $current_curl_version : '\([0-9][0-9]*\).*'`" +current_curl_minor_version="`expr $current_curl_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" +if [[ $current_curl_major_version -lt 7 || + ($current_curl_major_version -eq 7 && + $current_curl_minor_version -lt 54) ]]; then + CURL_VERSION=${CURL_VERSION-7.60.0} +fi + +# +# Some packages need xz to unpack their current source. +# XXX: tar, since macOS 10.9, can uncompress xz'ed tarballs, +# so perhaps we could get rid of this now? +# +XZ_VERSION=5.2.5 + +# +# Some packages need lzip to unpack their current source. +# +LZIP_VERSION=1.21 + +# +# The version of libPCRE on Catalina is insufficient to build glib due to +# missing UTF-8 support. +# +PCRE_VERSION=8.45 + +# +# CMake is required to do the build - and to build some of the +# dependencies. +# +CMAKE_VERSION=${CMAKE_VERSION-3.21.4} + +# +# Ninja isn't required, as make is provided with Xcode, but it is +# claimed to build faster than make. +# Comment it out if you don't want it. +# +NINJA_VERSION=${NINJA_VERSION-1.10.2} + +# +# The following libraries and tools are required even to build only TShark. +# +GETTEXT_VERSION=0.21 +GLIB_VERSION=2.76.6 +if [ "$GLIB_VERSION" ]; then + GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`" + GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + GLIB_MAJOR_MINOR_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION + GLIB_MAJOR_MINOR_DOTDOT_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_DOTDOT_VERSION +fi +PKG_CONFIG_VERSION=0.29.2 +# +# libgpg-error is required for libgcrypt. +# +LIBGPG_ERROR_VERSION=1.39 +# +# libgcrypt is required. +# +LIBGCRYPT_VERSION=1.8.7 +# +# libpcre2 is required. +# +PCRE2_VERSION=10.39 + +# +# One or more of the following libraries are required to build Wireshark. +# +# To override the version of Qt call the script with some of the variables +# set to the new values. Setting the variable to empty will disable building +# the toolkit and will uninstall # any version previously installed by the +# script, e.g. +# "QT_VERSION=5.10.1 ./macos-setup.sh" +# will build and install with QT 5.10.1. +# +QT_VERSION=${QT_VERSION-6.2.4} + +if [ "$QT_VERSION" ]; then + QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`" + QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION + QT_MAJOR_MINOR_DOTDOT_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION.$QT_DOTDOT_VERSION +fi + +# +# The following libraries are optional. +# Comment them out if you don't want them, but note that some of +# the optional libraries are required by other optional libraries. +# +LIBSMI_VERSION=0.4.8 +GNUTLS_VERSION=3.7.8 +if [ "$GNUTLS_VERSION" ]; then + # + # We'll be building GnuTLS, so we may need some additional libraries. + # We assume GnuTLS can work with Nettle; newer versions *only* use + # Nettle, not libgcrypt. + # + GNUTLS_MAJOR_VERSION="`expr $GNUTLS_VERSION : '\([0-9][0-9]*\).*'`" + GNUTLS_MINOR_VERSION="`expr $GNUTLS_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + NETTLE_VERSION=3.9.1 + + # + # And, in turn, Nettle requires GMP. + # + GMP_VERSION=6.3.0 + + # + # And p11-kit + P11KIT_VERSION=0.25.0 + + # Which requires libtasn1 + LIBTASN1_VERSION=4.19.0 +fi +# Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3 +# yet, and we need to check for compatibility issues (we'd want Lua +# scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua +# features present in all three versions) +LUA_VERSION=5.2.4 +SNAPPY_VERSION=1.1.10 +ZSTD_VERSION=1.5.5 +LIBXML2_VERSION=2.11.5 +LZ4_VERSION=1.9.4 +SBC_VERSION=2.0 +CARES_VERSION=1.19.1 +LIBSSH_VERSION=0.10.5 +# mmdbresolve +MAXMINDDB_VERSION=1.4.3 +NGHTTP2_VERSION=1.56.0 +NGHTTP3_VERSION=0.15.0 +SPANDSP_VERSION=0.0.6 +SPEEXDSP_VERSION=1.2.1 +if [ "$SPANDSP_VERSION" ]; then + # + # SpanDSP depends on libtiff. + # + LIBTIFF_VERSION=3.8.1 +fi +BCG729_VERSION=1.1.1 +# libilbc 3.0.0 & later link with absiel, which is released under Apache 2.0 +ILBC_VERSION=2.0.2 +OPUS_VERSION=1.4 + +# +# Is /usr/bin/python3 a working version of Python? It may be, as it +# might be a wrapper that runs the Python 3 that's part of Xcode. +# +if /usr/bin/python3 --version >/dev/null 2>&1 +then + # + # Yes - don't bother installing Python 3 from elsewhere + # + : +else + # + # No - install a Python package. + # + PYTHON3_VERSION=3.9.5 +fi +BROTLI_VERSION=1.0.9 +# minizip +ZLIB_VERSION=1.3 +# Uncomment to enable automatic updates using Sparkle +#SPARKLE_VERSION=2.1.0 + +# +# Asciidoctor is required to build the documentation. +# +ASCIIDOCTOR_VERSION=${ASCIIDOCTOR_VERSION-2.0.16} +ASCIIDOCTORPDF_VERSION=${ASCIIDOCTORPDF_VERSION-1.6.1} + +# +# GNU autotools. They're not supplied with the macOS versions we +# support, and we currently use them for minizip. +# +AUTOCONF_VERSION=2.71 +AUTOMAKE_VERSION=1.16.5 +LIBTOOL_VERSION=2.4.6 + +install_curl() { + if [ "$CURL_VERSION" -a ! -f curl-$CURL_VERSION-done ] ; then + echo "Downloading, building, and installing curl:" + [ -f curl-$CURL_VERSION.tar.bz2 ] || curl -L -O https://curl.haxx.se/download/curl-$CURL_VERSION.tar.bz2 || exit 1 + $no_build && echo "Skipping installation" && return + bzcat curl-$CURL_VERSION.tar.bz2 | tar xf - || exit 1 + cd curl-$CURL_VERSION + ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch curl-$CURL_VERSION-done + fi +} + +uninstall_curl() { + if [ ! -z "$installed_curl_version" ] ; then + echo "Uninstalling curl:" + cd curl-$installed_curl_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm curl-$installed_curl_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf curl-$installed_curl_version + rm -rf curl-$installed_curl_version.tar.bz2 + fi + + installed_curl_version="" + fi +} + +install_xz() { + if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then + echo "Downloading, building, and installing xz:" + [ -f xz-$XZ_VERSION.tar.bz2 ] || curl -L -O https://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1 + $no_build && echo "Skipping installation" && return + bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1 + cd xz-$XZ_VERSION + # + # This builds and installs liblzma, which libxml2 uses, and + # Wireshark uses liblzma, so we need to build this with + # all the minimum-deployment-version and SDK stuff. + # + CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch xz-$XZ_VERSION-done + fi +} + +uninstall_xz() { + if [ ! -z "$installed_xz_version" ] ; then + echo "Uninstalling xz:" + cd xz-$installed_xz_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm xz-$installed_xz_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf xz-$installed_xz_version + rm -rf xz-$installed_xz_version.tar.bz2 + fi + + installed_xz_version="" + fi +} + +install_lzip() { + if [ "$LZIP_VERSION" -a ! -f lzip-$LZIP_VERSION-done ] ; then + echo "Downloading, building, and installing lzip:" + [ -f lzip-$LZIP_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/lzip/lzip-$LZIP_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat lzip-$LZIP_VERSION.tar.gz | tar xf - || exit 1 + cd lzip-$LZIP_VERSION + ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch lzip-$LZIP_VERSION-done + fi +} + +uninstall_lzip() { + if [ ! -z "$installed_lzip_version" ] ; then + echo "Uninstalling lzip:" + cd lzip-$installed_lzip_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm lzip-$installed_lzip_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf lzip-$installed_lzip_version + rm -rf lzip-$installed_lzip_version.tar.gz + fi + + installed_lzip_version="" + fi +} + +install_pcre() { + if [ "$PCRE_VERSION" -a ! -f pcre-$PCRE_VERSION-done ] ; then + echo "Downloading, building, and installing pcre:" + [ -f pcre-$PCRE_VERSION.tar.bz2 ] || curl -L -O https://sourceforge.net/projects/pcre/files/pcre/$PCRE_VERSION/pcre-$PCRE_VERSION.tar.bz2 || exit 1 + $no_build && echo "Skipping installation" && return + bzcat pcre-$PCRE_VERSION.tar.bz2 | tar xf - || exit 1 + cd pcre-$PCRE_VERSION + ./configure --enable-unicode-properties || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch pcre-$PCRE_VERSION-done + fi +} + +uninstall_pcre() { + if [ ! -z "$installed_pcre_version" ] ; then + echo "Uninstalling pcre:" + cd pcre-$installed_pcre_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm pcre-$installed_pcre_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf pcre-$installed_pcre_version + rm -rf pcre-$installed_pcre_version.tar.bz2 + fi + + installed_pcre_version="" + fi +} + +install_pcre2() { + if [ "$PCRE2_VERSION" -a ! -f "pcre2-$PCRE2_VERSION-done" ] ; then + echo "Downloading, building, and installing pcre2:" + [ -f "pcre2-$PCRE2_VERSION.tar.bz2" ] || curl -L -O "https://github.com/PhilipHazel/pcre2/releases/download/pcre2-$PCRE2_VERSION/pcre2-10.39.tar.bz2" || exit 1 + $no_build && echo "Skipping installation" && return + bzcat "pcre2-$PCRE2_VERSION.tar.bz2" | tar xf - || exit 1 + cd "pcre2-$PCRE2_VERSION" + mkdir build_dir + cd build_dir + # https://github.com/Homebrew/homebrew-core/blob/master/Formula/pcre2.rb + # https://github.com/microsoft/vcpkg/blob/master/ports/pcre2/portfile.cmake + MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" \ + $DO_CMAKE -DBUILD_STATIC_LIBS=OFF -DBUILD_SHARED_LIBS=ON -DPCRE2_SUPPORT_JIT=ON -DPCRE2_SUPPORT_UNICODE=ON .. || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd ../.. + touch "pcre2-$PCRE2_VERSION-done" + fi +} + +uninstall_pcre2() { + if [ -n "$installed_pcre2_version" ] && [ -s "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt" ] ; then + echo "Uninstalling pcre2:" + # PCRE2 10.39 installs pcre2unicode.3 twice, so this will return an error. + while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt"; echo) + rm "pcre2-$installed_pcre2_version-done" + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf "pcre2-$installed_pcre2_version" + rm -rf "pcre2-$installed_pcre2_version.tar.bz2" + fi + + installed_pcre2_version="" + fi +} + +install_autoconf() { + if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then + echo "Downloading, building and installing GNU autoconf..." + [ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1 + cd autoconf-$AUTOCONF_VERSION + ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch autoconf-$AUTOCONF_VERSION-done + fi +} + +uninstall_autoconf() { + if [ ! -z "$installed_autoconf_version" ] ; then + # + # automake and libtool depend on this, so uninstall them. + # + uninstall_libtool "$@" + uninstall_automake "$@" + + echo "Uninstalling GNU autoconf:" + cd autoconf-$installed_autoconf_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm autoconf-$installed_autoconf_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf autoconf-$installed_autoconf_version + rm -rf autoconf-$installed_autoconf_version.tar.xz + fi + + installed_autoconf_version="" + fi +} + +install_automake() { + if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then + echo "Downloading, building and installing GNU automake..." + [ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1 + cd automake-$AUTOMAKE_VERSION + ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch automake-$AUTOMAKE_VERSION-done + fi +} + +uninstall_automake() { + if [ ! -z "$installed_automake_version" ] ; then + # + # libtool depends on this(?), so uninstall it. + # + uninstall_libtool "$@" + + echo "Uninstalling GNU automake:" + cd automake-$installed_automake_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm automake-$installed_automake_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf automake-$installed_automake_version + rm -rf automake-$installed_automake_version.tar.xz + fi + + installed_automake_version="" + fi +} + +install_libtool() { + if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then + echo "Downloading, building and installing GNU libtool..." + [ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1 + cd libtool-$LIBTOOL_VERSION + ./configure --program-prefix=g || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch libtool-$LIBTOOL_VERSION-done + fi +} + +uninstall_libtool() { + if [ ! -z "$installed_libtool_version" ] ; then + echo "Uninstalling GNU libtool:" + cd libtool-$installed_libtool_version + $DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool + $DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm libtool-$installed_libtool_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libtool-$installed_libtool_version + rm -rf libtool-$installed_libtool_version.tar.xz + fi + + installed_libtool_version="" + fi +} + +install_ninja() { + if [ "$NINJA_VERSION" -a ! -f ninja-$NINJA_VERSION-done ] ; then + echo "Downloading and installing Ninja:" + # + # Download the zipball, unpack it, and move the binary to + # /usr/local/bin. + # + [ -f ninja-mac-v$NINJA_VERSION.zip ] || curl -L -o ninja-mac-v$NINJA_VERSION.zip https://github.com/ninja-build/ninja/releases/download/v$NINJA_VERSION/ninja-mac.zip || exit 1 + $no_build && echo "Skipping installation" && return + unzip ninja-mac-v$NINJA_VERSION.zip + sudo mv ninja /usr/local/bin + touch ninja-$NINJA_VERSION-done + fi +} + +uninstall_ninja() { + if [ ! -z "$installed_ninja_version" ]; then + echo "Uninstalling Ninja:" + sudo rm /usr/local/bin/ninja + rm ninja-$installed_ninja_version-done + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + rm -f ninja-mac-v$installed_ninja_version.zip + fi + + installed_ninja_version="" + fi +} + +install_asciidoctor() { + if [ ! -f asciidoctor-${ASCIIDOCTOR_VERSION}-done ]; then + echo "Downloading and installing Asciidoctor:" + sudo gem install -V asciidoctor --version "=${ASCIIDOCTOR_VERSION}" + touch asciidoctor-${ASCIIDOCTOR_VERSION}-done + fi +} + +uninstall_asciidoctor() { + if [ ! -z "$installed_asciidoctor_version" ]; then + echo "Uninstalling Asciidoctor:" + sudo gem uninstall -V asciidoctor --version "=${installed_asciidoctor_version}" + rm asciidoctor-$installed_asciidoctor_version-done + + ##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version, + # whatever it might happen to be called. + # + ## rm -f asciidoctor-$installed_asciidoctor_version + ##fi + installed_asciidoctor_version="" + fi +} + +install_asciidoctorpdf() { + if [ ! -f asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done ]; then + ## XXX gem does not track dependencies that are installed for asciidoctor-pdf + ## record them for uninstallation + ## ttfunk, pdf-core, prawn, prawn-table, Ascii85, ruby-rc4, hashery, afm, pdf-reader, prawn-templates, public_suffix, addressable, css_parser, prawn-svg, prawn-icon, safe_yaml, thread_safe, polyglot, treetop, asciidoctor-pdf + echo "Downloading and installing Asciidoctor-pdf:" + sudo gem install -V asciidoctor-pdf --version "=${ASCIIDOCTORPDF_VERSION}" + touch asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done + fi +} + +uninstall_asciidoctorpdf() { + if [ ! -z "$installed_asciidoctorpdf_version" ]; then + echo "Uninstalling Asciidoctor:" + sudo gem uninstall -V asciidoctor-pdf --version "=${installed_asciidoctorpdf_version}" + ## XXX uninstall dependencies + rm asciidoctorpdf-$installed_asciidoctorpdf_version-done + + ##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version, + # whatever it might happen to be called. + # + ## rm -f asciidoctorpdf-$installed_asciidoctorpdf_version + ##fi + installed_asciidoctorpdf_version="" + fi +} + +install_cmake() { + if [ ! -f cmake-$CMAKE_VERSION-done ]; then + echo "Downloading and installing CMake:" + CMAKE_MAJOR_VERSION="`expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'`" + CMAKE_MINOR_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + CMAKE_MAJOR_MINOR_VERSION=$CMAKE_MAJOR_VERSION.$CMAKE_MINOR_VERSION + + # + # NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the + # package in question supports both 32-bit and 64-bit x86. + # + case "$CMAKE_MAJOR_VERSION" in + + 0|1|2) + echo "CMake $CMAKE_VERSION" is too old 1>&2 + ;; + + 3) + # + # Download the DMG and do a drag install, where "drag" means + # "mv". + # + # 3.1.1 to 3.19.1 have a Darwin-x86_64 DMG. + # 3.19.2 has a macos-universal DMG for 10.10 and later + # 3.19.3 and later have a macos-universal DMG for 10.13 and later, + # and a macos10.10-universal DMG for 10.10 and later. + # + if [ "$CMAKE_MINOR_VERSION" -lt 5 ]; then + echo "CMake $CMAKE_VERSION" is too old 1>&2 + elif [ "$CMAKE_MINOR_VERSION" -lt 19 -o \ + "$CMAKE_VERSION" = 3.19.0 -o \ + "$CMAKE_VERSION" = 3.19.1 ]; then + type="Darwin-x86_64" + elif [ "$CMAKE_VERSION" = 3.19.2 -o \ + "$DARWIN_MAJOR_VERSION" -ge 17 ]; then + type="macos-universal" + else + type="macos10.0-universal" + fi + [ -f cmake-$CMAKE_VERSION-$type.dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-$type.dmg || exit 1 + $no_build && echo "Skipping installation" && return + sudo hdiutil attach cmake-$CMAKE_VERSION-$type.dmg || exit 1 + sudo ditto /Volumes/cmake-$CMAKE_VERSION-$type/CMake.app /Applications/CMake.app || exit 1 + + # + # Plant the appropriate symbolic links in /usr/local/bin. + # It's a drag-install, so there's no installer to make them, + # and the CMake code to put them in place is lame, as + # + # 1) it defaults to /usr/bin, not /usr/local/bin; + # 2) it doesn't request the necessary root privileges; + # 3) it can't be run from the command line; + # + # so we do it ourselves. + # + for i in ccmake cmake cmake-gui cmakexbuild cpack ctest + do + sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i + done + sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-$type + ;; + + *) + ;; + esac + touch cmake-$CMAKE_VERSION-done + fi +} + +uninstall_cmake() { + if [ ! -z "$installed_cmake_version" ]; then + echo "Uninstalling CMake:" + installed_cmake_major_version="`expr $installed_cmake_version : '\([0-9][0-9]*\).*'`" + case "$installed_cmake_major_version" in + + 0|1|2) + echo "CMake $installed_cmake_version" is too old 1>&2 + ;; + + 3) + sudo rm -rf /Applications/CMake.app + for i in ccmake cmake cmake-gui cmakexbuild cpack ctest + do + sudo rm -f /usr/local/bin/$i + done + rm cmake-$installed_cmake_version-done + ;; + esac + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version, + # whatever it might happen to be called. + # + rm -f cmake-$installed_cmake_version-Darwin-x86_64.dmg + rm -f cmake-$installed_cmake_version-macos-universal.dmg + rm -f cmake-$installed_cmake_version-macos10.0-universal.dmg + fi + + installed_cmake_version="" + fi +} + +install_meson() { + # + # Install Meson with pip3 if we don't have it already. + # + if $MESON --version >/dev/null 2>&1 + then + # We have it. + : + else + sudo pip3 install meson + touch meson-done + fi +} + +uninstall_meson() { + # + # If we installed Meson, uninstal it with pip3. + # + if [ -f meson-done ] ; then + sudo pip3 uninstall meson + rm -f meson-done + fi +} + +install_pytest() { + # + # Install pytest with pip3 if we don't have it already. + # + if python3 -m pytest --version >/dev/null 2>&1 + then + # We have it. + : + else + sudo pip3 install pytest pytest-xdist + touch pytest-done + fi +} + +uninstall_pytest() { + # + # If we installed pytest, uninstal it with pip3. + # + if [ -f pytest-done ] ; then + sudo pip3 uninstall pytest pytest-xdist + rm -f pytest-done + fi +} + +install_gettext() { + if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then + echo "Downloading, building, and installing GNU gettext:" + [ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1 + cd gettext-$GETTEXT_VERSION + + # + # This is annoying. + # + # GNU gettext's configuration script checks for the presence of an + # implementation of iconv(). Not only does it check whether iconv() + # is available, *but* it checks for certain behavior *not* specified + # by POSIX that the GNU implementation provides, namely that an + # attempt to convert the UTF-8 for the EURO SYMBOL chaaracter to + # ISO 8859-1 results in an error. + # + # macOS, prior to Sierra, provided the GNU iconv library (as it's + # a POSIX API). + # + # Sierra appears to have picked up an implementation from FreeBSD + # (that implementation originated with the CITRUS project: + # + # http://citrus.bsdclub.org + # + # with additional work done to integrate it into NetBSD, and then + # adopted by FreeBSD with further work done). + # + # That implementation does *NOT* return an error in that case; instead, + # it transliterates the EURO SYMBOL to "EUR". + # + # Both behaviors conform to POSIX. + # + # This causes GNU gettext's configure script to conclude that it + # should not say iconv() is available. That, unfortunately, causes + # the build to fail with a linking error when trying to build + # libtextstyle (a library for which we have no use, that is offered + # as a separate library by the GNU project: + # + # https://www.gnu.org/software/gettext/libtextstyle/manual/libtextstyle.html + # + # and that is presumably bundled in GNU gettext because some gettext + # tool depends on it). The failure appears to be due to: + # + # libtextstyle's exported symbols file is generated from a + # template and a script that passes through only symbols + # that appear in a header file that declares the symbol + # as extern; + # + # one such header file declares iconv_ostream_create, but only + # if HAVE_ICONV is defined. + # + # the source file that defines iconv_ostream_create does so + # only if HAVE_ICONV is defined; + # + # the aforementioned script pays *NO ATTENTION* to #ifdefs, + # so it will include iconv_ostream_create in the list of + # symbols to export regardless of whether a working iconv() + # was found; + # + # the linker failing because it was told to export a symbol + # that doesn't exist. + # + # This is a collection of multiple messes: + # + # 1) not all versions of iconv() defaulting to "return an error + # if the target character set doesn't have a character that + # corresponds to the source character" and not offering a way + # to force that behavior; + # + # 2) either some parts of GNU gettext - and libraries bundled + # with it, for some mysterious reason - depending on the GNU + # behavior rather than assuming only what POSIX specifies, and + # the configure script checking for the GNU behavior and not + # setting HAVE_ICONV if it's not found; + # + # 3) the process for building the exported symbols file not + # removing symbols that won't exist in the build due to + # a "working" iconv() not being found; + # + # 4) the file that would define iconv_ostream_create() not + # defining as an always-failing stub if HAVE_ICONV isn't + # defined; + # + # 5) macOS's linker failing if a symbol is specified in an + # exported symbols file but not found, while other linkers + # just ignore it? (I add this because I'm a bit surprised + # that this has not been fixed, as I suspect it would fail + # on FreeBSD and possibly NetBSD as well, as I think their + # iconv()s also default to transliterating rather than failing + # if an input character has no corresponding character in + # the output encoding.) + # + # The Homebrew folks are aware of this and have reported it to + # Apple as a "feedback", for what that's worth: + # + # https://github.com/Homebrew/homebrew-core/commit/af3b4da5a096db3d9ee885e99ed29b33dec1f1c4 + # + # We adopt their fix, which is to run the configure script with + # "am_cv_func_iconv_works=y" as one of the arguments if it's + # running on Sonoma; in at least one test, doing so on Ventura + # caused the build to fail. + # + if [[ $DARWIN_MAJOR_VERSION -ge 23 ]]; then + workaround_arg="am_cv_func_iconv_works=y" + else + workaround_arg= + fi + CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure $workaround_arg || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch gettext-$GETTEXT_VERSION-done + fi +} + +uninstall_gettext() { + if [ ! -z "$installed_gettext_version" ] ; then + # + # GLib depends on this, so uninstall it. + # + uninstall_glib "$@" + + echo "Uninstalling GNU gettext:" + cd gettext-$installed_gettext_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm gettext-$installed_gettext_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf gettext-$installed_gettext_version + rm -rf gettext-$installed_gettext_version.tar.gz + fi + + installed_gettext_version="" + fi +} + +install_pkg_config() { + if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then + echo "Downloading, building, and installing pkg-config:" + [ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -L -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1 + cd pkg-config-$PKG_CONFIG_VERSION + ./configure --with-internal-glib || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch pkg-config-$PKG_CONFIG_VERSION-done + fi +} + +uninstall_pkg_config() { + if [ ! -z "$installed_pkg_config_version" ] ; then + echo "Uninstalling pkg-config:" + cd pkg-config-$installed_pkg_config_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm pkg-config-$installed_pkg_config_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf pkg-config-$installed_pkg_config_version + rm -rf pkg-config-$installed_pkg_config_version.tar.gz + fi + + installed_pkg_config_version="" + fi +} + +install_glib() { + if [ ! -f glib-$GLIB_VERSION-done ] ; then + echo "Downloading, building, and installing GLib:" + glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'` + # + # Starting with GLib 2.28.8, xz-compressed tarballs are available. + # + [ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O https://download.gnome.org/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1 + cd glib-$GLIB_VERSION + # + # First, determine where the system include files are. + # (It's not necessarily /usr/include.) There's a bit of a + # greasy hack here; pre-5.x versions of the developer tools + # don't support the --show-sdk-path option, and will produce + # no output, so includedir will be set to /usr/include + # (in those older versions of the developer tools, there is + # a /usr/include directory). + # + # We need this for several things we do later. + # + includedir=`SDKROOT="$SDKPATH" xcrun --show-sdk-path 2>/dev/null`/usr/include + # + # GLib's configuration procedure, whether autotools-based or + # Meson-based, really likes to use pkg-config to find libraries, + # including libffi. + # + # At least some versions of macOS provide libffi, but, as macOS + # doesn't provide pkg-config, they don't provide a .pc file for + # it, so the autotools-based configuration needs some trickery + # to get it to find the OS-supplied libffi, and the Meson-based + # configuration simply won't find it at all. + # + # So, if we have a system-provided libffi, but pkg-config + # doesn't find libffi, we construct a .pc file for that libffi, + # and install it in /usr/local/lib/pkgconfig. + # + # First, check whether pkg-config finds libffi but thinks its + # header files are in a non-existent directory. That probaby + # means that we generated the .pc file when some SDK was the + # appropriate choice, but Xcode has been updated since then + # and that SDK is no longer present. If so, we remove it, + # so that we will regenerate it if necessary, rather than + # trying to build with a bogus include directory. (Yes, this + # can happen, and has happened, causing mysterius build + # failures when "#include <ffi.h>" fails.) + # + if pkg-config libffi ; then + # We have a .pc file for libffi; what does it say the + # include directory is? + incldir=`pkg-config --variable=includedir libffi` + if [ ! -z "$incldir" -a ! -d "$incldir" ] ; then + # Bogus - remove it, assuming + $DO_RM /usr/local/lib/pkgconfig/libffi.pc + fi + fi + if pkg-config libffi ; then + # It found libffi; no need to install a .pc file, and we + # don't want to overwrite what's there already. + : + elif [ ! -e $includedir/ffi/ffi.h ] ; then + # We don't appear to have libffi as part of the system, so + # let the configuration process figure out what to do. + # + # We test for the header file, not the library, because, in + # Big Sur and later, there's no guarantee that, for a system + # shared library, there's a corresponding dylib file in + # /usr/lib. + : + else + # + # We have libffi, but pkg-config didn't find it; generate + # and install the .pc file. + # + + # + # Now generate the .pc file. + # + # We generate the contents of the .pc file by using cat with + # a here document containing a template for the file and + # piping that to a sed command that replaces @INCLUDEDIR@ in + # the template with the include directory we discovered + # above, so that the .pc file gives the compiler flags + # necessary to find the libffi headers (which are *not* + # necessarily in /usr/include, as per the above). + # + # The EOF marker for the here document is in quotes, to tell + # the shell not to do shell expansion, as .pc files use a + # syntax to refer to .pc file variables that looks like the + # syntax to refer to shell variables. + # + # The writing of the libffi.pc file is a greasy hack - the + # process of generating the contents of the .pc file writes + # to the standard output, but running the last process in + # the pipeline as root won't allow the shell that's + # *running* it to open the .pc file if we don't have write + # permission on /usr/local/lib/pkgconfig, so we need a + # program that creates a file and then reads from the + # standard input and writes to that file. UN*Xes have a + # program that does that; it's called "tee". :-) + # + # However, it *also* writes the file to the standard output, + # so we redirect that to /dev/null when we run it. + # + cat <<"EOF" | sed "s;@INCLUDEDIR@;$includedir;" | $DO_TEE_TO_PC_FILE /usr/local/lib/pkgconfig/libffi.pc >/dev/null +prefix=/usr +libdir=${prefix}/lib +includedir=@INCLUDEDIR@ + +Name: ffi +Description: Library supporting Foreign Function Interfaces +Version: 3.2.9999 +Libs: -L${libdir} -lffi +Cflags: -I${includedir}/ffi +EOF + fi + + # + # GLib 2.59.1 and later use Meson+Ninja as the build system. + # + case $GLIB_MAJOR_VERSION in + + 1) + echo "GLib $GLIB_VERSION" is too old 1>&2 + ;; + + *) + case $GLIB_MINOR_VERSION in + + [0-9]|1[0-9]|2[0-9]|3[0-7]) + echo "GLib $GLIB_VERSION" is too old 1>&2 + ;; + + 3[8-9]|4[0-9]|5[0-8]) + if [ ! -f ./configure ]; then + LIBTOOLIZE=glibtoolize ./autogen.sh + fi + # + # At least with the version of Xcode that comes with + # Leopard, /usr/include/ffi/fficonfig.h doesn't define + # MACOSX, which causes the build of GLib to fail for at + # least some versions of GLib. If we don't find + # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, + # explicitly define it. + # + # While we're at it, suppress -Wformat-nonliteral to + # avoid a case where clang's stricter rules on when not + # to complain about non-literal format arguments cause + # it to complain about code that's safe but it wasn't + # told that. See my comment #25 in GNOME bug 691608: + # + # https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25 + # + if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h + then + # It's defined, nothing to do + CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + else + CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + fi + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + ;; + + 59|[6-9][0-9]|[1-9][0-9][0-9]) + # + # 2.59.0 doesn't require Meson and Ninja, but it + # supports it, and I'm too lazy to add a dot-dot + # version check. + # + # Disable tests to work around + # + # https://gitlab.gnome.org/GNOME/glib/-/issues/2902 + # + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MESON -Dtests=false _build || exit 1 + ninja $MAKE_BUILD_OPTS -C _build || exit 1 + $DO_NINJA_INSTALL || exit 1 + ;; + *) + echo "Glib's put out 1000 2.x releases?" 1>&2 + ;; + + esac + esac + cd .. + touch glib-$GLIB_VERSION-done + fi +} + +uninstall_glib() { + if [ ! -z "$installed_glib_version" ] ; then + echo "Uninstalling GLib:" + cd glib-$installed_glib_version + installed_glib_major_version="`expr $installed_glib_version : '\([0-9][0-9]*\).*'`" + installed_glib_minor_version="`expr $installed_glib_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + installed_glib_dotdot_version="`expr $installed_glib_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + installed_glib_major_minor_version=$installed_glib_major_version.$installed_glib_minor_version + installed_glib_major_minor_dotdot_version=$installed_glib_major_version.$installed_glib_minor_version.$installed_glib_dotdot_version + # + # GLib 2.59.1 and later use Meson+Ninja as the build system. + # + case $installed_glib_major_version in + + 1) + $DO_MAKE_UNINSTALL || exit 1 + # + # This appears to delete dependencies out from under other + # Makefiles in the tree, causing it to fail. At least until + # that gets fixed, if it ever gets fixed, we just ignore the + # exit status of "make distclean" + # + # make distclean || exit 1 + make distclean || echo "Ignoring make distclean failure" 1>&2 + ;; + + *) + case $installed_glib_minor_version in + + [0-9]|1[0-9]|2[0-9]|3[0-9]|4[0-9]|5[0-8]) + $DO_MAKE_UNINSTALL || exit 1 + # + # This appears to delete dependencies out from under other + # Makefiles in the tree, causing it to fail. At least until + # that gets fixed, if it ever gets fixed, we just ignore the + # exit status of "make distclean" + # + # make distclean || exit 1 + make distclean || echo "Ignoring make distclean failure" 1>&2 + ;; + + 59|[6-9][0-9]|[1-9][0-9][0-9]) + # + # 2.59.0 doesn't require Meson and Ninja, but it + # supports it, and I'm too lazy to add a dot-dot + # version check. + # + $DO_NINJA_UNINSTALL || exit 1 + # + # For Meson+Ninja, we do the build in an _build + # subdirectory, so the equivalent of "make distclean" + # is just to remove the directory tree. + # + rm -rf _build + ;; + + *) + echo "Glib's put out 1000 2.x releases?" 1>&2 + ;; + esac + esac + cd .. + rm glib-$installed_glib_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf glib-$installed_glib_version + rm -rf glib-$installed_glib_version.tar.xz + fi + + installed_glib_version="" + fi +} + +install_qt() { + if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then + echo "Downloading and installing Qt:" + # + # What you get for this URL might just be a 302 Found reply, so use + # -L so we get redirected. + # + # 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg + # 5.2.0: qt-mac-opensource-{version}.dmg + # 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg + # 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg + # 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg + # 5.15 - 6.0: Offline installers no longer provided. + # ( https://download.qt.io/archive/qt/5.15/5.15.0/OFFLINE_README.txt ) + # XXX: We need a different approach for QT >= 5.15. One option would be to + # install https://github.com/miurahr/aqtinstall, either permanently or into + # a temporary venv. + # + case $QT_MAJOR_VERSION in + + 1|2|3|4) + echo "Qt $QT_VERSION" is too old 1>&2 + ;; + + 5) + case $QT_MINOR_VERSION in + + 0|1|2|3|4|5|6|7|8) + echo "Qt $QT_VERSION" is too old 1>&2 + ;; + + 9|10|11|12|13|14) + QT_VOLUME=qt-opensource-mac-x64-$QT_VERSION + ;; + *) + echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2 + ;; + + esac + [ -f $QT_VOLUME.dmg ] || curl -L -O https://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION/$QT_MAJOR_MINOR_DOTDOT_VERSION/$QT_VOLUME.dmg || exit 1 + $no_build && echo "Skipping installation" && return + sudo hdiutil attach $QT_VOLUME.dmg || exit 1 + + # + # Run the installer executable directly, so that we wait for + # it to finish. Then unmount the volume. + # + /Volumes/$QT_VOLUME/$QT_VOLUME.app/Contents/MacOS/$QT_VOLUME + sudo hdiutil detach /Volumes/$QT_VOLUME + touch qt-$QT_VERSION-done + ;; + *) + echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2 + ;; + esac + fi +} + +uninstall_qt() { + if [ ! -z "$installed_qt_version" ] ; then + echo "Uninstalling Qt:" + rm -rf $HOME/Qt$installed_qt_version + rm qt-$installed_qt_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded version. + # + # 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg + # 5.2.0: qt-mac-opensource-{version}.dmg + # 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg + # 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg + # 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg + # + installed_qt_major_version="`expr $installed_qt_version : '\([0-9][0-9]*\).*'`" + installed_qt_minor_version="`expr $installed_qt_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + installed_qt_dotdot_version="`expr $installed_qt_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + case $installed_qt_major_version in + + 1|2|3|4) + echo "Qt $installed_qt_version" is too old 1>&2 + ;; + + 5*) + case $installed_qt_minor_version in + + 0|1|2|3|4|5) + echo "Qt $installed_qt_version" is too old 1>&2 + ;; + + 6|7|8) + installed_qt_volume=qt-opensource-mac-x64-clang-$installed_qt_version.dmg + ;; + + 9|10|11|12|13|14) + installed_qt_volume=qt-opensource-mac-x64-$installed_qt_version.dmg + ;; + esac + esac + rm -f $installed_qt_volume + fi + + installed_qt_version="" + fi +} + +install_libsmi() { + if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then + echo "Downloading, building, and installing libsmi:" + [ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1 + cd libsmi-$LIBSMI_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch libsmi-$LIBSMI_VERSION-done + fi +} + +uninstall_libsmi() { + if [ ! -z "$installed_libsmi_version" ] ; then + echo "Uninstalling libsmi:" + cd libsmi-$installed_libsmi_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm libsmi-$installed_libsmi_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libsmi-$installed_libsmi_version + rm -rf libsmi-$installed_libsmi_version.tar.gz + fi + + installed_libsmi_version="" + fi +} + +install_libgpg_error() { + if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then + echo "Downloading, building, and installing libgpg-error:" + [ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1 + $no_build && echo "Skipping installation" && return + bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1 + cd libgpg-error-$LIBGPG_ERROR_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch libgpg-error-$LIBGPG_ERROR_VERSION-done + fi +} + +uninstall_libgpg_error() { + if [ ! -z "$installed_libgpg_error_version" ] ; then + # + # libgcrypt depends on this, so uninstall it. + # + uninstall_libgcrypt "$@" + + echo "Uninstalling libgpg-error:" + cd libgpg-error-$installed_libgpg_error_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm libgpg-error-$installed_libgpg_error_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libgpg-error-$installed_libgpg_error_version + rm -rf libgpg-error-$installed_libgpg_error_version.tar.bz2 + fi + + installed_libgpg_error_version="" + fi +} + +install_libgcrypt() { + if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then + # + # libgpg-error is required for libgcrypt. + # + if [ -z $LIBGPG_ERROR_VERSION ] + then + echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2 + exit 1 + fi + + echo "Downloading, building, and installing libgcrypt:" + [ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1 + cd libgcrypt-$LIBGCRYPT_VERSION + # + # The assembler language code is not compatible with the macOS + # x86 assembler (or is it an x86-64 vs. x86-32 issue?). + # + # libgcrypt expects gnu89, not c99/gnu99, semantics for + # "inline". See, for example: + # + # https://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html + # + CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch libgcrypt-$LIBGCRYPT_VERSION-done + fi +} + +uninstall_libgcrypt() { + if [ ! -z "$installed_libgcrypt_version" ] ; then + echo "Uninstalling libgcrypt:" + cd libgcrypt-$installed_libgcrypt_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm libgcrypt-$installed_libgcrypt_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libgcrypt-$installed_libgcrypt_version + rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz + fi + + installed_libgcrypt_version="" + fi +} + +install_gmp() { + if [ "$GMP_VERSION" -a ! -f gmp-$GMP_VERSION-done ] ; then + echo "Downloading, building, and installing GMP:" + [ -f gmp-$GMP_VERSION.tar.lz ] || curl -L -O https://gmplib.org/download/gmp/gmp-$GMP_VERSION.tar.lz || exit 1 + $no_build && echo "Skipping installation" && return + lzip -c -d gmp-$GMP_VERSION.tar.lz | tar xf - || exit 1 + cd gmp-$GMP_VERSION + # + # Create a fat binary: https://gmplib.org/manual/Notes-for-Package-Builds.html + # + # According to + # + # https://www.mail-archive.com/gmp-bugs@gmplib.org/msg01492.html + # + # and other pages, the Shiny New Linker in Xcode 15 causes this + # build to fail with "ld: branch8 out of range 384833 in + # ___gmpn_add_nc_x86_64"; linking with -ld64 is a workaround. + # + # For now, link with -ld64 on Xcode 15 and later. + # + XCODE_VERSION=`xcodebuild -version | sed -n 's;Xcode \(.*\);\1;p'` + XCODE_MAJOR_VERSION="`expr $XCODE_VERSION : '\([0-9][0-9]*\).*'`" + XCODE_MINOR_VERSION="`expr $XCODE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + XCODE_DOTDOT_VERSION="`expr $XCODE_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + if [ "$XCODE_MAJOR_VERSION" -ge 15 ] + then + LD64_FLAG="-ld64" + else + LD64_FLAG="" + fi + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS $LD64_FLAG" ./configure --enable-fat || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch gmp-$GMP_VERSION-done + fi +} + +uninstall_gmp() { + if [ ! -z "$installed_gmp_version" ] ; then + # + # Nettle depends on this, so uninstall it. + # + uninstall_nettle "$@" + + echo "Uninstalling GMP:" + cd gmp-$installed_gmp_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm gmp-$installed_gmp_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf gmp-$installed_gmp_version + rm -rf gmp-$installed_gmp_version.tar.lz + fi + + installed_gmp_version="" + fi +} + +install_libtasn1() { + if [ "$LIBTASN1_VERSION" -a ! -f libtasn1-$LIBTASN1_VERSION-done ] ; then + echo "Downloading, building, and installing libtasn1:" + [ -f libtasn1-$LIBTASN1_VERSION.tar.gz ] || curl -L -O https://ftpmirror.gnu.org/libtasn1/libtasn1-$LIBTASN1_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat libtasn1-$LIBTASN1_VERSION.tar.gz | tar xf - || exit 1 + cd libtasn1-$LIBTASN1_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch libtasn1-$LIBTASN1_VERSION-done + fi +} + +uninstall_libtasn1() { + if [ ! -z "$installed_libtasn1_version" ] ; then + # + # p11-kit depends on this, so uninstall it. + # + uninstall_p11_kit "$@" + + echo "Uninstalling libtasn1:" + cd libtasn1-$installed_libtasn1_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm libtasn1-$installed_libtasn1_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libtasn1-$installed_libtasn1_version + rm -rf libtasn1-$installed_libtasn1_version.tar.gz + fi + + installed_libtasn1_version="" + fi +} + +install_p11_kit() { + if [ "$P11KIT_VERSION" -a ! -f p11-kit-$P11KIT_VERSION-done ] ; then + echo "Downloading, building, and installing p11-kit:" + [ -f p11-kit-$P11KIT_VERSION.tar.xz ] || curl -L -O https://github.com/p11-glue/p11-kit/releases/download/$P11KIT_VERSION/p11-kit-$P11KIT_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat p11-kit-$P11KIT_VERSION.tar.xz | tar xf - || exit 1 + cd p11-kit-$P11KIT_VERSION + # + # Prior to Catalina, the libffi that's supplied with macOS + # doesn't support ffi_closure_alloc() or ffi_prep_closure_loc(), + # both of which are required by p11-kit if built with libffi. + # + # According to + # + # https://p11-glue.github.io/p11-glue/p11-kit/manual/devel-building.html + # + # libffi is used "for sharing of PKCS#11 modules between + # multiple callers in the same process. It is highly recommended + # that this dependency be treated as a required dependency.", + # but it's not clear that this matters to us, so we just + # configure p11-kit not to use libffi. + # + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -L/usr/local/lib" LIBS=-lintl ./configure --without-libffi --without-trust-paths || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch p11-kit-$P11KIT_VERSION-done + fi +} + +uninstall_p11_kit() { + if [ ! -z "$installed_p11_kit_version" ] ; then + # + # Nettle depends on this, so uninstall it. + # + uninstall_nettle "$@" + + echo "Uninstalling p11-kit:" + cd p11-kit-$installed_p11_kit_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm p11-kit-$installed_p11_kit_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf p11-kit-$installed_p11_kit_version + rm -rf p11-kit-$installed_p11_kit_version.tar.xz + fi + + installed_p11_kit_version="" + fi +} + +install_nettle() { + if [ "$NETTLE_VERSION" -a ! -f nettle-$NETTLE_VERSION-done ] ; then + echo "Downloading, building, and installing Nettle:" + [ -f nettle-$NETTLE_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/gnu/nettle/nettle-$NETTLE_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat nettle-$NETTLE_VERSION.tar.gz | tar xf - || exit 1 + cd nettle-$NETTLE_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I/usr/local/include" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -L/usr/local/lib" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch nettle-$NETTLE_VERSION-done + fi +} + +uninstall_nettle() { + if [ ! -z "$installed_nettle_version" ] ; then + # + # GnuTLS depends on this, so uninstall it. + # + uninstall_gnutls "$@" + + echo "Uninstalling Nettle:" + cd nettle-$installed_nettle_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm nettle-$installed_nettle_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf nettle-$installed_nettle_version + rm -rf nettle-$installed_nettle_version.tar.gz + fi + + installed_nettle_version="" + fi +} + +install_gnutls() { + if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then + # + # GnuTLS requires Nettle. + # + if [ -z $NETTLE_VERSION ] + then + echo "GnuTLS requires Nettle, but you didn't install Nettle" 1>&2 + exit 1 + fi + + echo "Downloading, building, and installing GnuTLS:" + if [[ $GNUTLS_MAJOR_VERSION -ge 3 ]] + then + # + # Starting with GnuTLS 3.x, the tarballs are compressed with + # xz rather than bzip2. + # + [ -f gnutls-$GNUTLS_VERSION.tar.xz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat gnutls-$GNUTLS_VERSION.tar.xz | tar xf - || exit 1 + else + [ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1 + $no_build && echo "Skipping installation" && return + bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1 + fi + cd gnutls-$GNUTLS_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I /usr/local/include" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I/usr/local/include/" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -L/usr/local/lib" ./configure --with-included-unistring --disable-guile || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch gnutls-$GNUTLS_VERSION-done + fi +} + +uninstall_gnutls() { + if [ ! -z "$installed_gnutls_version" ] ; then + echo "Uninstalling GnuTLS:" + cd gnutls-$installed_gnutls_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm gnutls-$installed_gnutls_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf gnutls-$installed_gnutls_version + rm -rf gnutls-$installed_gnutls_version.tar.bz2 + fi + + installed_gnutls_version="" + fi +} + +install_lua() { + if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then + echo "Downloading, building, and installing Lua:" + [ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O https://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1 + cd lua-$LUA_VERSION + make MYCFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" MYLDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MAKE_BUILD_OPTS macosx || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch lua-$LUA_VERSION-done + fi +} + +uninstall_lua() { + if [ ! -z "$installed_lua_version" ] ; then + echo "Uninstalling Lua:" + # + # Lua has no "make uninstall", so just remove stuff manually. + # There's no configure script, so there's no need for + # "make distclean", either; just do "make clean". + # + (cd /usr/local/bin; $DO_RM -f lua luac) + (cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp) + (cd /usr/local/lib; $DO_RM -f liblua.a) + (cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1) + cd lua-$installed_lua_version + make clean || exit 1 + cd .. + rm lua-$installed_lua_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf lua-$installed_lua_version + rm -rf lua-$installed_lua_version.tar.gz + fi + + installed_lua_version="" + fi +} + +install_snappy() { + if [ "$SNAPPY_VERSION" -a ! -f snappy-$SNAPPY_VERSION-done ] ; then + echo "Downloading, building, and installing snappy:" + [ -f snappy-$SNAPPY_VERSION.tar.gz ] || curl -L -o snappy-$SNAPPY_VERSION.tar.gz https://github.com/google/snappy/archive/$SNAPPY_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat snappy-$SNAPPY_VERSION.tar.gz | tar xf - || exit 1 + cd snappy-$SNAPPY_VERSION + if [ "$SNAPPY_VERSION" = "1.1.10" ] ; then + # This patch corresponds to https://github.com/google/snappy/commit/27f34a580be4a3becf5f8c0cba13433f53c21337 + patch -p0 <${topdir}/macosx-support-lib-patches/snappy-signed.patch || exit 1 + fi + mkdir build_dir + cd build_dir + # + # Build a shared library, because we'll be linking libwireshark, + # which is a C library, with libsnappy, and libsnappy is a C++ + # library and requires the C++ run time; the shared library + # will carry that dependency with it, so linking with it should + # Just Work. + # + MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE -DBUILD_SHARED_LIBS=YES -DSNAPPY_BUILD_BENCHMARKS=NO -DSNAPPY_BUILD_TESTS=NO ../ || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd ../.. + touch snappy-$SNAPPY_VERSION-done + fi +} + +uninstall_snappy() { + if [ ! -z "$installed_snappy_version" ] ; then + echo "Uninstalling snappy:" + cd snappy-$installed_snappy_version + # + # snappy uses cmake and doesn't support "make uninstall"; + # just remove what we know it installs. + # + # $DO_MAKE_UNINSTALL || exit 1 + if [ -s build_dir/install_manifest.txt ] ; then + while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat build_dir/install_manifest.txt; echo) + else + $DO_RM -f /usr/local/lib/libsnappy.1.1.8.dylib \ + /usr/local/lib/libsnappy.1.dylib \ + /usr/local/lib/libsnappy.dylib \ + /usr/local/include/snappy-c.h \ + /usr/local/include/snappy-sinksource.h \ + /usr/local/include/snappy-stubs-public.h \ + /usr/local/include/snappy.h \ + /usr/local/lib/cmake/Snappy/SnappyConfig.cmake \ + /usr/local/lib/cmake/Snappy/SnappyConfigVersion.cmake \ + /usr/local/lib/cmake/Snappy/SnappyTargets-noconfig.cmake \ + /usr/local/lib/cmake/Snappy/SnappyTargets.cmake || exit 1 + fi + # + # snappy uses cmake and doesn't support "make distclean"; + #.just remove the entire build directory. + # + # make distclean || exit 1 + rm -rf build_dir || exit 1 + cd .. + rm snappy-$installed_snappy_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf snappy-$installed_snappy_version + rm -rf snappy-$installed_snappy_version.tar.gz + fi + + installed_snappy_version="" + fi +} + +install_zstd() { + if [ "$ZSTD_VERSION" -a ! -f zstd-$ZSTD_VERSION-done ] ; then + echo "Downloading, building, and installing zstd:" + [ -f zstd-$ZSTD_VERSION.tar.gz ] || curl -L -O https://github.com/facebook/zstd/releases/download/v$ZSTD_VERSION/zstd-$ZSTD_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat zstd-$ZSTD_VERSION.tar.gz | tar xf - || exit 1 + cd zstd-$ZSTD_VERSION + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch zstd-$ZSTD_VERSION-done + fi +} + +uninstall_zstd() { + if [ ! -z "$installed_zstd_version" ] ; then + echo "Uninstalling zstd:" + cd zstd-$installed_zstd_version + $DO_MAKE_UNINSTALL || exit 1 + # + # zstd has no configure script, so there's no need for + # "make distclean", and the Makefile supplied with it + # has no "make distclean" rule; just do "make clean". + # + make clean || exit 1 + cd .. + rm zstd-$installed_zstd_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf zstd-$installed_zstd_version + rm -rf zstd-$installed_zstd_version.tar.gz + fi + + installed_zstd_version="" + fi +} + +install_libxml2() { + if [ "$LIBXML2_VERSION" -a ! -f libxml2-$LIBXML2_VERSION-done ] ; then + echo "Downloading, building, and installing libxml2:" + LIBXML2_MAJOR_VERSION="`expr $LIBXML2_VERSION : '\([0-9][0-9]*\).*'`" + LIBXML2_MINOR_VERSION="`expr $LIBXML2_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + LIBXML2_MAJOR_MINOR_VERSION=$LIBXML2_MAJOR_VERSION.$LIBXML2_MINOR_VERSION + [ -f libxml2-$LIBXML2_VERSION.tar.gz ] || curl -L -O https://download.gnome.org/sources/libxml2/$LIBXML2_MAJOR_MINOR_VERSION/libxml2-$LIBXML2_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat libxml2-$LIBXML2_VERSION.tar.xz | tar xf - || exit 1 + cd libxml2-$LIBXML2_VERSION + # + # At least on macOS 12.0.1 with Xcode 13.1, when we build + # libxml2, the linker complains that we don't have the right + # to link with the Python framework, so don't build with + # Python. + # + CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-python || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch libxml2-$LIBXML2_VERSION-done + fi +} + +uninstall_libxml2() { + if [ ! -z "$installed_libxml2_version" ] ; then + echo "Uninstalling libxml2:" + cd libxml2-$installed_libxml2_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm libxml2-$installed_libxml2_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libxml2-$installed_libxml2_version + rm -rf libxml2-$installed_libxml2_version.tar.xz + fi + + installed_libxml2_version="" + fi +} + +install_lz4() { + if [ "$LZ4_VERSION" -a ! -f lz4-$LZ4_VERSION-done ] ; then + echo "Downloading, building, and installing lz4:" + # + # lz4 switched from sequentially numbered releases, named rN, + # to vX.Y.Z-numbered releases. + # + # The old sequentially-numbered releases were in tarballs + # at https://github.com/lz4/lz4/archive/rN.tar.gz, which + # extract into an lz4-rN directory. + # + # THe new vX.Y.Z-numbered releases are in tarballs at + # https://github.com/lz4/lz4/archive/vX.Y.Z.tar.gz, which + # extract into an lz4-X.Y.Z directory - no, not lz4-vX.Y.Z, + # just lz4-X.Y.Z. + # + # We expect LZ4_VERSION to be set to rN for the sequentially- + # numbered releases and X.Y.Z - not vX.Y.Z - for the vX.Y.Z- + # numbered releases. We also tell Curl to download the tarball + # with a name that corresponds to the name of the target + # directory, so that it begins with "lz4-" and ends with either + # "rN" or "X.Y.Z", to match what almost all of the other + # support libraries do. + # + if [[ "$LZ4_VERSION" == r* ]] + then + [ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/$LZ4_VERSION.tar.gz || exit 1 + else + [ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/v$LZ4_VERSION.tar.gz || exit 1 + fi + $no_build && echo "Skipping installation" && return + gzcat lz4-$LZ4_VERSION.tar.gz | tar xf - || exit 1 + cd lz4-$LZ4_VERSION + # + # No configure script here, but it appears that if MOREFLAGS is + # set, that's added to CFLAGS, and those are combined with LDFLAGS + # and CXXFLAGS into FLAGS, which is used when building source + # files and libraries. + # + MOREFLAGS="-D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch lz4-$LZ4_VERSION-done + fi +} + +uninstall_lz4() { + if [ ! -z "$installed_lz4_version" ] ; then + echo "Uninstalling lz4:" + cd lz4-$installed_lz4_version + $DO_MAKE_UNINSTALL || exit 1 + # + # lz4's Makefile doesn't support "make distclean"; just do + # "make clean". Perhaps not using autotools means that + # there's no need for "make distclean". + # + # make distclean || exit 1 + make clean || exit 1 + cd .. + rm lz4-$installed_lz4_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + # "make install" apparently causes some stuff to be + # modified in the build tree, so, as it's done as + # root, that leaves stuff owned by root in the build + # tree. Therefore, we have to remove the build tree + # as root. + # + sudo rm -rf lz4-$installed_lz4_version + rm -rf lz4-$installed_lz4_version.tar.gz + fi + + installed_lz4_version="" + fi +} + +install_sbc() { + if [ "$SBC_VERSION" -a ! -f sbc-$SBC_VERSION-done ] ; then + echo "Downloading, building, and installing sbc:" + [ -f sbc-$SBC_VERSION.tar.gz ] || curl -L -O https://www.kernel.org/pub/linux/bluetooth/sbc-$SBC_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat sbc-$SBC_VERSION.tar.gz | tar xf - || exit 1 + cd sbc-$SBC_VERSION + if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then + CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS -U__ARM_NEON__" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1 + else + CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1 + fi + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch sbc-$SBC_VERSION-done + fi +} + +uninstall_sbc() { + if [ ! -z "$installed_sbc_version" ] ; then + echo "Uninstalling sbc:" + cd sbc-$installed_sbc_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm sbc-$installed_sbc_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf sbc-$installed_sbc_version + rm -rf sbc-$installed_sbc_version.tar.gz + fi + + installed_sbc_version="" + fi +} + +install_maxminddb() { + if [ "$MAXMINDDB_VERSION" -a ! -f maxminddb-$MAXMINDDB_VERSION-done ] ; then + echo "Downloading, building, and installing MaxMindDB API:" + [ -f libmaxminddb-$MAXMINDDB_VERSION.tar.gz ] || curl -L -O https://github.com/maxmind/libmaxminddb/releases/download/$MAXMINDDB_VERSION/libmaxminddb-$MAXMINDDB_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat libmaxminddb-$MAXMINDDB_VERSION.tar.gz | tar xf - || exit 1 + cd libmaxminddb-$MAXMINDDB_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch maxminddb-$MAXMINDDB_VERSION-done + fi +} + +uninstall_maxminddb() { + if [ ! -z "$installed_maxminddb_version" ] ; then + echo "Uninstalling MaxMindDB API:" + cd libmaxminddb-$installed_maxminddb_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm maxminddb-$installed_maxminddb_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libmaxminddb-$installed_maxminddb_version + rm -rf libmaxminddb-$installed_maxminddb_version.tar.gz + fi + + installed_maxminddb_version="" + fi +} + +install_c_ares() { + if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then + echo "Downloading, building, and installing C-Ares API:" + [ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O https://c-ares.org/download/c-ares-$CARES_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1 + cd c-ares-$CARES_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch c-ares-$CARES_VERSION-done + fi +} + +uninstall_c_ares() { + if [ ! -z "$installed_cares_version" ] ; then + echo "Uninstalling C-Ares API:" + cd c-ares-$installed_cares_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm c-ares-$installed_cares_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf c-ares-$installed_cares_version + rm -rf c-ares-$installed_cares_version.tar.gz + fi + + installed_cares_version="" + fi +} + +install_libssh() { + if [ "$LIBSSH_VERSION" -a ! -f libssh-$LIBSSH_VERSION-done ] ; then + echo "Downloading, building, and installing libssh:" + LIBSSH_MAJOR_VERSION="`expr $LIBSSH_VERSION : '\([0-9][0-9]*\).*'`" + LIBSSH_MINOR_VERSION="`expr $LIBSSH_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" + LIBSSH_MAJOR_MINOR_VERSION=$LIBSSH_MAJOR_VERSION.$LIBSSH_MINOR_VERSION + [ -f libssh-$LIBSSH_VERSION.tar.xz ] || curl -L -O https://www.libssh.org/files/$LIBSSH_MAJOR_MINOR_VERSION/libssh-$LIBSSH_VERSION.tar.xz + $no_build && echo "Skipping installation" && return + xzcat libssh-$LIBSSH_VERSION.tar.xz | tar xf - || exit 1 + cd libssh-$LIBSSH_VERSION + mkdir build + cd build + MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE -DWITH_GCRYPT=1 ../ || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd ../.. + touch libssh-$LIBSSH_VERSION-done + fi +} + +uninstall_libssh() { + if [ ! -z "$installed_libssh_version" ] ; then + echo "Uninstalling libssh:" + cd libssh-$installed_libssh_version + # + # libssh uses cmake and doesn't support "make uninstall"; + # just remove what we know it installs. + # + # $DO_MAKE_UNINSTALL || exit 1 + $DO_RM -rf /usr/local/lib/libssh* \ + /usr/local/include/libssh \ + /usr/local/lib/pkgconfig/libssh* \ + /usr/local/lib/cmake/libssh || exit 1 + # + # libssh uses cmake and doesn't support "make distclean"; + # just remove the entire build directory. + # + # make distclean || exit 1 + rm -rf build || exit 1 + cd .. + rm libssh-$installed_libssh_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf libssh-$installed_libssh_version + rm -rf libssh-$installed_libssh_version.tar.gz + fi + + installed_libssh_version="" + fi +} + +install_nghttp2() { + if [ "$NGHTTP2_VERSION" -a ! -f nghttp2-$NGHTTP2_VERSION-done ] ; then + echo "Downloading, building, and installing nghttp2:" + [ -f nghttp2-$NGHTTP2_VERSION.tar.xz ] || curl -L -O https://github.com/nghttp2/nghttp2/releases/download/v$NGHTTP2_VERSION/nghttp2-$NGHTTP2_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat nghttp2-$NGHTTP2_VERSION.tar.xz | tar xf - || exit 1 + cd nghttp2-$NGHTTP2_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch nghttp2-$NGHTTP2_VERSION-done + fi +} + +uninstall_nghttp2() { + if [ ! -z "$installed_nghttp2_version" ] ; then + echo "Uninstalling nghttp2:" + cd nghttp2-$installed_nghttp2_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm nghttp2-$installed_nghttp2_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf nghttp2-$installed_nghttp2_version + rm -rf nghttp2-$installed_nghttp2_version.tar.xz + fi + + installed_nghttp2_version="" + fi +} + +install_nghttp3() { + if [ "$NGHTTP3_VERSION" -a ! -f nghttp3-$NGHTTP3_VERSION-done ] ; then + echo "Downloading, building, and installing nghttp3:" + [ -f nghttp3-$NGHTTP3_VERSION.tar.xz ] || curl -L -O https://github.com/ngtcp2/nghttp3/releases/download/v$NGHTTP3_VERSION/nghttp3-$NGHTTP3_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + xzcat nghttp3-$NGHTTP3_VERSION.tar.xz | tar xf - || exit 1 + cd nghttp3-$NGHTTP3_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch nghttp3-$NGHTTP3_VERSION-done + fi +} + +uninstall_nghttp3() { + if [ ! -z "$installed_nghttp3_version" ] ; then + echo "Uninstalling nghttp3:" + cd nghttp3-$installed_nghttp3_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm nghttp3-$installed_nghttp3_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf nghttp3-$installed_nghttp3_version + rm -rf nghttp3-$installed_nghttp3_version.tar.xz + fi + + installed_nghttp3_version="" + fi +} + +install_libtiff() { + if [ "$LIBTIFF_VERSION" -a ! -f tiff-$LIBTIFF_VERSION-done ] ; then + echo "Downloading, building, and installing libtiff:" + [ -f tiff-$LIBTIFF_VERSION.tar.gz ] || + curl --fail -L -O https://download.osgeo.org/libtiff/tiff-$LIBTIFF_VERSION.tar.gz || + curl --fail -L -O https://download.osgeo.org/libtiff/old/tiff-$LIBTIFF_VERSION.tar.gz || + exit 1 + $no_build && echo "Skipping installation" && return + gzcat tiff-$LIBTIFF_VERSION.tar.gz | tar xf - || exit 1 + cd tiff-$LIBTIFF_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch tiff-$LIBTIFF_VERSION-done + fi +} + +uninstall_libtiff() { + if [ ! -z "$installed_libtiff_version" ] ; then + echo "Uninstalling libtiff:" + cd tiff-$installed_libtiff_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm tiff-$installed_libtiff_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf tiff-$installed_libtiff_version + rm -rf tiff-$installed_libtiff_version.tar.gz + fi + + installed_libtiff_version="" + fi +} + +install_spandsp() { + if [ "$SPANDSP_VERSION" -a ! -f spandsp-$SPANDSP_VERSION-done ] ; then + echo "Downloading, building, and installing SpanDSP:" + [ -f spandsp-$SPANDSP_VERSION.tar.gz ] || curl -L -O https://www.soft-switch.org/downloads/spandsp/spandsp-$SPANDSP_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat spandsp-$SPANDSP_VERSION.tar.gz | tar xf - || exit 1 + cd spandsp-$SPANDSP_VERSION + # + # Don't use -Wunused-but-set-variable, as it's not supported + # by all the gcc versions in the versions of Xcode that we + # support. + # + patch -p0 <${topdir}/macosx-support-lib-patches/spandsp-configure-patch || exit 1 + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch spandsp-$SPANDSP_VERSION-done + fi +} + +uninstall_spandsp() { + if [ ! -z "$installed_spandsp_version" ] ; then + echo "Uninstalling SpanDSP:" + cd spandsp-$installed_spandsp_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm spandsp-$installed_spandsp_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf spandsp-$installed_spandsp_version + rm -rf spandsp-$installed_spandsp_version.tar.gz + fi + + installed_spandsp_version="" + fi +} + +install_speexdsp() { + if [ "$SPEEXDSP_VERSION" -a ! -f speexdsp-$SPEEXDSP_VERSION-done ] ; then + echo "Downloading, building, and installing SpeexDSP:" + [ -f speexdsp-$SPEEXDSP_VERSION.tar.gz ] || curl -L -O https://ftp.osuosl.org/pub/xiph/releases/speex/speexdsp-$SPEEXDSP_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat speexdsp-$SPEEXDSP_VERSION.tar.gz | tar xf - || exit 1 + cd speexdsp-$SPEEXDSP_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch speexdsp-$SPEEXDSP_VERSION-done + fi +} + +uninstall_speexdsp() { + if [ ! -z "$installed_speexdsp_version" ] ; then + echo "Uninstalling SpeexDSP:" + cd speexdsp-$installed_speexdsp_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm speexdsp-$installed_speexdsp_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf speexdsp-$installed_speexdsp_version + rm -rf speexdsp-$installed_speexdsp_version.tar.gz + fi + + installed_speexdsp_version="" + fi +} + +install_bcg729() { + if [ "$BCG729_VERSION" -a ! -f bcg729-$BCG729_VERSION-done ] ; then + echo "Downloading, building, and installing bcg729:" + [ -f bcg729-$BCG729_VERSION.tar.gz ] || curl -L -O https://gitlab.linphone.org/BC/public/bcg729/-/archive/$BCG729_VERSION/bcg729-$BCG729_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat bcg729-$BCG729_VERSION.tar.gz | tar xf - || exit 1 + cd bcg729-$BCG729_VERSION + mkdir build_dir + cd build_dir + MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE ../ || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd ../.. + touch bcg729-$BCG729_VERSION-done + fi +} + +uninstall_bcg729() { + if [ ! -z "$installed_bcg729_version" ] ; then + echo "Uninstalling bcg729:" + cd bcg729-$installed_bcg729_version + # + # bcg729 uses cmake on macOS and doesn't support "make uninstall"; + # just remove what we know it installs. + # + # $DO_MAKE_UNINSTALL || exit 1 + $DO_RM -rf /usr/local/share/Bcg729 \ + /usr/local/lib/libbcg729* \ + /usr/local/include/bcg729 \ + /usr/local/lib/pkgconfig/libbcg729* || exit 1 + # + # bcg729 uses cmake on macOS and doesn't support "make distclean"; + # just remove the enire build directory. + # + # make distclean || exit 1 + rm -rf build_dir || exit 1 + cd .. + rm bcg729-$installed_bcg729_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf bcg729-$installed_bcg729_version + rm -rf bcg729-$installed_bcg729_version.tar.gz + fi + + installed_bcg729_version="" + fi +} + +install_ilbc() { + if [ -n "$ILBC_VERSION" ] && [ ! -f ilbc-$ILBC_VERSION-done ] ; then + echo "Downloading, building, and installing iLBC:" + [ -f libilbc-$ILBC_VERSION.tar.bz ] || curl --location --remote-name https://github.com/TimothyGu/libilbc/releases/download/v$ILBC_VERSION/libilbc-$ILBC_VERSION.tar.bz2 || exit 1 + $no_build && echo "Skipping installation" && return + bzcat libilbc-$ILBC_VERSION.tar.bz2 | tar xf - || exit 1 + cd libilbc-$ILBC_VERSION || exit 1 + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch ilbc-$ILBC_VERSION-done + fi +} + +uninstall_ilbc() { + if [ -n "$installed_ilbc_version" ] ; then + echo "Uninstalling iLBC:" + cd "libilbc-$installed_ilbc_version" || exit 1 + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm "ilbc-$installed_ilbc_version-done" + + if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf "libilbc-$installed_ilbc_version" + rm -rf "libilbc-$installed_ilbc_version.tar.bz2" + fi + + installed_ilbc_version="" + fi +} + +install_opus() { + if [ "$OPUS_VERSION" -a ! -f opus-$OPUS_VERSION-done ] ; then + echo "Downloading, building, and installing opus:" + [ -f opus-$OPUS_VERSION.tar.gz ] || curl -L -O https://downloads.xiph.org/releases/opus/opus-$OPUS_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat opus-$OPUS_VERSION.tar.gz | tar xf - || exit 1 + cd opus-$OPUS_VERSION + CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd .. + touch opus-$OPUS_VERSION-done + fi +} + +uninstall_opus() { + if [ ! -z "$installed_opus_version" ] ; then + echo "Uninstalling opus:" + cd opus-$installed_opus_version + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd .. + rm opus-$installed_opus_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf opus-$installed_opus_version + rm -rf opus-$installed_opus_version.tar.gz + fi + + installed_opus_version="" + fi +} + +install_python3() { + # The macos11 installer can be deployed to older versions, down to + # 10.9 (Mavericks), but is still considered experimental so continue + # to use the 64-bit installer (10.9) on earlier releases for now. + local macver=x10.9 + if [[ $DARWIN_MAJOR_VERSION -gt 19 ]]; then + # The macos11 installer is required for Arm-based Macs, which require + # macOS 11 Big Sur. Note that the package name is "11.0" (no x) for + # 3.9.1 but simply "11" for 3.9.2 (and later) + if [[ $PYTHON3_VERSION = 3.9.1 ]]; then + macver=11.0 + else + macver=11 + fi + fi + if [ "$PYTHON3_VERSION" -a ! -f python3-$PYTHON3_VERSION-done ] ; then + echo "Downloading and installing python3:" + [ -f python-$PYTHON3_VERSION-macos$macver.pkg ] || curl -L -O https://www.python.org/ftp/python/$PYTHON3_VERSION/python-$PYTHON3_VERSION-macos$macver.pkg || exit 1 + $no_build && echo "Skipping installation" && return + sudo installer -target / -pkg python-$PYTHON3_VERSION-macos$macver.pkg || exit 1 + touch python3-$PYTHON3_VERSION-done + + # + # On macOS, the pip3 installed from Python packages appears to + # install scripts /Library/Frameworks/Python.framework/Versions/M.N/bin, + # where M.N is the major and minor version of Python (the dot-dot + # release is irrelevant). + # + # Strip off any dot-dot component in $PYTHON3_VERSION. + # + python_version=`echo $PYTHON3_VERSION | sed 's/\([1-9][0-9]*\.[1-9][0-9]*\).*/\1/'` + # + # Now treat Meson as being in the directory in question. + # + MESON="/Library/Frameworks/Python.framework/Versions/$python_version/bin/meson" + else + # + # We're using the Python 3 that's in /usr/bin, the pip3 for + # which installs scripts in /usr/local/bin, so, when we + # install Meson, look for it there. + # + MESON=/usr/local/bin/meson + fi +} + +uninstall_python3() { + # Major version (e.g. "3.7") + local PYTHON_VERSION=${installed_python3_version%.*} + if [ ! -z "$installed_python3_version" ] ; then + echo "Uninstalling python3:" + frameworkdir="/Library/Frameworks/Python.framework/Versions/$PYTHON_VERSION" + sudo rm -rf "$frameworkdir" + sudo rm -rf "/Applications/Python $PYTHON_VERSION" + sudo find /usr/local/bin -maxdepth 1 -lname "*$frameworkdir/bin/*" -delete + # Remove three symlinks and empty directories. Removing directories + # might fail if for some reason multiple versions are installed. + sudo rm /Library/Frameworks/Python.framework/Headers + sudo rm /Library/Frameworks/Python.framework/Python + sudo rm /Library/Frameworks/Python.framework/Resources + sudo rmdir /Library/Frameworks/Python.framework/Versions + sudo rmdir /Library/Frameworks/Python.framework + sudo pkgutil --forget org.python.Python.PythonApplications-$PYTHON_VERSION + sudo pkgutil --forget org.python.Python.PythonDocumentation-$PYTHON_VERSION + sudo pkgutil --forget org.python.Python.PythonFramework-$PYTHON_VERSION + sudo pkgutil --forget org.python.Python.PythonUnixTools-$PYTHON_VERSION + rm python3-$installed_python3_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -f python-$installed_python3_version-macos11.pkg + rm -f python-$installed_python3_version-macos11.0.pkg + rm -f python-$installed_python3_version-macosx10.9.pkg + rm -f python-$installed_python3_version-macosx10.6.pkg + fi + + installed_python3_version="" + fi +} + +install_brotli() { + if [ "$BROTLI_VERSION" -a ! -f brotli-$BROTLI_VERSION-done ] ; then + echo "Downloading, building, and installing brotli:" + [ -f brotli-$BROTLI_VERSION.tar.gz ] || curl -L -o brotli-$BROTLI_VERSION.tar.gz https://github.com/google/brotli/archive/v$BROTLI_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat brotli-$BROTLI_VERSION.tar.gz | tar xf - || exit 1 + cd brotli-$BROTLI_VERSION + mkdir build_dir + cd build_dir + MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE ../ || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd ../.. + touch brotli-$BROTLI_VERSION-done + fi +} + +uninstall_brotli() { + if [ ! -z "$installed_brotli_version" ] ; then + echo "Uninstalling brotli:" + cd brotli-$installed_brotli_version + # + # brotli uses cmake on macOS and doesn't support "make uninstall"; + # just remove what we know it installs. + # + # $DO_MAKE_UNINSTALL || exit 1 + $DO_RM -rf /usr/local/bin/brotli \ + /usr/local/lib/libbrotli* \ + /usr/local/include/brotli \ + /usr/local/lib/pkgconfig/libbrotli* || exit 1 + # + # brotli uses cmake on macOS and doesn't support "make distclean"; + # just remove the enire build directory. + # + # make distclean || exit 1 + rm -rf build_dir || exit 1 + cd .. + rm brotli-$installed_brotli_version-done + + if [ "$#" -eq 1 -a "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf brotli-$installed_brotli_version + rm -rf brotli-$installed_brotli_version.tar.gz + fi + + installed_brotli_version="" + fi +} + +install_minizip() { + if [ "$ZLIB_VERSION" ] && [ ! -f minizip-$ZLIB_VERSION-done ] ; then + echo "Downloading, building, and installing zlib for minizip:" + [ -f zlib-$ZLIB_VERSION.tar.gz ] || curl -L -o zlib-$ZLIB_VERSION.tar.gz https://zlib.net/zlib-$ZLIB_VERSION.tar.gz || exit 1 + $no_build && echo "Skipping installation" && return + gzcat zlib-$ZLIB_VERSION.tar.gz | tar xf - || exit 1 + # + # minizip ships both with a minimal Makefile that doesn't + # support "make install", "make uninstall", or "make distclean", + # and with a Makefile.am file that, if we do an autoreconf, + # gives us a configure script, and a Makefile.in that, if we run + # the configure script, gives us a Makefile that supports ll of + # those targets, and that installs a pkg-config .pc file for + # minizip. + # + # So that's what we do. + # + cd zlib-$ZLIB_VERSION/contrib/minizip || exit 1 + LIBTOOLIZE=glibtoolize autoreconf --force --install + CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 + make $MAKE_BUILD_OPTS || exit 1 + $DO_MAKE_INSTALL || exit 1 + cd ../../.. + touch minizip-$ZLIB_VERSION-done + fi +} + +uninstall_minizip() { + if [ -n "$installed_minizip_version" ] ; then + echo "Uninstalling minizip:" + cd zlib-$installed_minizip_version/contrib/minizip + $DO_MAKE_UNINSTALL || exit 1 + make distclean || exit 1 + cd ../../.. + + rm minizip-$installed_minizip_version-done + + if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then + # + # Get rid of the previously downloaded and unpacked version. + # + rm -rf zlib-$installed_minizip_version + rm -rf zlib-$installed_minizip_version.tar.gz + fi + + installed_minizip_version="" + fi +} + +install_sparkle() { + if [ "$SPARKLE_VERSION" ] && [ ! -f sparkle-$SPARKLE_VERSION-done ] ; then + echo "Downloading and installing Sparkle:" + # + # Download the tarball and unpack it in /usr/local/Sparkle-x.y.z + # + [ -f Sparkle-$SPARKLE_VERSION.tar.xz ] || curl -L -o Sparkle-$SPARKLE_VERSION.tar.xz https://github.com/sparkle-project/Sparkle/releases/download/$SPARKLE_VERSION/Sparkle-$SPARKLE_VERSION.tar.xz || exit 1 + $no_build && echo "Skipping installation" && return + test -d "/usr/local/Sparkle-$SPARKLE_VERSION" || sudo mkdir "/usr/local/Sparkle-$SPARKLE_VERSION" + sudo tar -C "/usr/local/Sparkle-$SPARKLE_VERSION" -xpof Sparkle-$SPARKLE_VERSION.tar.xz + touch sparkle-$SPARKLE_VERSION-done + fi +} + +uninstall_sparkle() { + if [ -n "$installed_sparkle_version" ]; then + echo "Uninstalling Sparkle:" + sudo rm -rf "/usr/local/Sparkle-$installed_sparkle_version" + if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then + rm -f "Sparkle-$installed_sparkle_version.tar.xz" + fi + + installed_sparkle_version="" + fi +} + +install_all() { + # + # Check whether the versions we have installed are the versions + # requested; if not, uninstall the installed versions. + # + if [ ! -z "$installed_brotli_version" -a \ + "$installed_brotli_version" != "$BROTLI_VERSION" ] ; then + echo "Installed brotli version is $installed_brotli_version" + if [ -z "$BROTLI_VERSION" ] ; then + echo "brotli is not requested" + else + echo "Requested brotli version is $BROTLI_VERSION" + fi + uninstall_brotli -r + fi + + if [ ! -z "$installed_python3_version" -a \ + "$installed_python3_version" != "$PYTHON3_VERSION" ] ; then + echo "Installed python3 version is $installed_python3_version" + if [ -z "$PYTHON3_VERSION" ] ; then + echo "python3 is not requested" + else + echo "Requested python3 version is $PYTHON3_VERSION" + fi + uninstall_python3 -r + fi + + if [ ! -z "$installed_bcg729_version" -a \ + "$installed_bcg729_version" != "$BCG729_VERSION" ] ; then + echo "Installed bcg729 version is $installed_bcg729_version" + if [ -z "$BCG729_VERSION" ] ; then + echo "bcg729 is not requested" + else + echo "Requested bcg729 version is $BCG729_VERSION" + fi + uninstall_bcg729 -r + fi + + if [ -n "$installed_ilbc_version" ] \ + && [ "$installed_ilbc_version" != "$ILBC_VERSION" ] ; then + echo "Installed iLBC version is $installed_ilbc_version" + if [ -z "$ILBC_VERSION" ] ; then + echo "iLBC is not requested" + else + echo "Requested iLBC version is $ILBC_VERSION" + fi + uninstall_ilbc -r + fi + + if [ -n "$installed_opus_version" ] \ + && [ "$installed_opus_version" != "$OPUS_VERSION" ] ; then + echo "Installed opus version is $installed_opus_version" + if [ -z "$OPUS_VERSION" ] ; then + echo "opus is not requested" + else + echo "Requested opus version is $OPUS_VERSION" + fi + uninstall_opus -r + fi + + if [ ! -z "$installed_spandsp_version" -a \ + "$installed_spandsp_version" != "$SPANDSP_VERSION" ] ; then + echo "Installed SpanDSP version is $installed_spandsp_version" + if [ -z "$SPANDSP_VERSION" ] ; then + echo "spandsp is not requested" + else + echo "Requested SpanDSP version is $SPANDSP_VERSION" + fi + uninstall_spandsp -r + fi + + if [ ! -z "$installed_speexdsp_version" -a \ + "$installed_speexdsp_version" != "$SPEEXDSP_VERSION" ] ; then + echo "Installed SpeexDSP version is $installed_speexdsp_version" + if [ -z "$SPEEXDSP_VERSION" ] ; then + echo "speexdsp is not requested" + else + echo "Requested SpeexDSP version is $SPEEXDSP_VERSION" + fi + uninstall_speexdsp -r + fi + + if [ ! -z "$installed_libtiff_version" -a \ + "$installed_libtiff_version" != "$LIBTIFF_VERSION" ] ; then + echo "Installed libtiff version is $installed_libtiff_version" + if [ -z "$LIBTIFF_VERSION" ] ; then + echo "libtiff is not requested" + else + echo "Requested libtiff version is $LIBTIFF_VERSION" + fi + uninstall_libtiff -r + fi + + if [ ! -z "$installed_nghttp2_version" -a \ + "$installed_nghttp2_version" != "$NGHTTP2_VERSION" ] ; then + echo "Installed nghttp2 version is $installed_nghttp2_version" + if [ -z "$NGHTTP2_VERSION" ] ; then + echo "nghttp2 is not requested" + else + echo "Requested nghttp2 version is $NGHTTP2_VERSION" + fi + uninstall_nghttp2 -r + fi + + if [ ! -z "$installed_nghttp3_version" -a \ + "$installed_nghttp3_version" != "$NGHTTP3_VERSION" ] ; then + echo "Installed nghttp3 version is $installed_nghttp3_version" + if [ -z "$NGHTTP3_VERSION" ] ; then + echo "nghttp3 is not requested" + else + echo "Requested nghttp3 version is $NGHTTP3_VERSION" + fi + uninstall_nghttp3 -r + fi + + if [ ! -z "$installed_libssh_version" -a \ + "$installed_libssh_version" != "$LIBSSH_VERSION" ] ; then + echo "Installed libssh version is $installed_libssh_version" + if [ -z "$LIBSSH_VERSION" ] ; then + echo "libssh is not requested" + else + echo "Requested libssh version is $LIBSSH_VERSION" + fi + uninstall_libssh -r + fi + + if [ ! -z "$installed_cares_version" -a \ + "$installed_cares_version" != "$CARES_VERSION" ] ; then + echo "Installed C-Ares version is $installed_cares_version" + if [ -z "$CARES_VERSION" ] ; then + echo "C-Ares is not requested" + else + echo "Requested C-Ares version is $CARES_VERSION" + fi + uninstall_c_ares -r + fi + + if [ ! -z "$installed_maxminddb_version" -a \ + "$installed_maxminddb_version" != "$MAXMINDDB_VERSION" ] ; then + echo "Installed MaxMindDB API version is $installed_maxminddb_version" + if [ -z "$MAXMINDDB_VERSION" ] ; then + echo "MaxMindDB is not requested" + else + echo "Requested MaxMindDB version is $MAXMINDDB_VERSION" + fi + uninstall_maxminddb -r + fi + + if [ ! -z "$installed_sbc_version" -a \ + "$installed_sbc_version" != "$SBC_VERSION" ] ; then + echo "Installed SBC version is $installed_sbc_version" + if [ -z "$SBC_VERSION" ] ; then + echo "SBC is not requested" + else + echo "Requested SBC version is $SBC_VERSION" + fi + uninstall_sbc -r + fi + + if [ ! -z "$installed_lz4_version" -a \ + "$installed_lz4_version" != "$LZ4_VERSION" ] ; then + echo "Installed LZ4 version is $installed_lz4_version" + if [ -z "$LZ4_VERSION" ] ; then + echo "LZ4 is not requested" + else + echo "Requested LZ4 version is $LZ4_VERSION" + fi + uninstall_lz4 -r + fi + + if [ ! -z "$installed_libxml2_version" -a \ + "$installed_libxml2_version" != "$LIBXML2_VERSION" ] ; then + echo "Installed libxml2 version is $installed_libxml2_version" + if [ -z "$LIBXML2_VERSION" ] ; then + echo "libxml2 is not requested" + else + echo "Requested libxml2 version is $LIBXML2_VERSION" + fi + uninstall_libxml2 -r + fi + + if [ ! -z "$installed_snappy_version" -a \ + "$installed_snappy_version" != "$SNAPPY_VERSION" ] ; then + echo "Installed SNAPPY version is $installed_snappy_version" + if [ -z "$SNAPPY_VERSION" ] ; then + echo "SNAPPY is not requested" + else + echo "Requested SNAPPY version is $SNAPPY_VERSION" + fi + uninstall_snappy -r + fi + + if [ ! -z "$installed_lua_version" -a \ + "$installed_lua_version" != "$LUA_VERSION" ] ; then + echo "Installed Lua version is $installed_lua_version" + if [ -z "$LUA_VERSION" ] ; then + echo "Lua is not requested" + else + echo "Requested Lua version is $LUA_VERSION" + fi + uninstall_lua -r + fi + + if [ ! -z "$installed_gnutls_version" -a \ + "$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then + echo "Installed GnuTLS version is $installed_gnutls_version" + if [ -z "$GNUTLS_VERSION" ] ; then + echo "GnuTLS is not requested" + else + echo "Requested GnuTLS version is $GNUTLS_VERSION" + fi + uninstall_gnutls -r + fi + + if [ ! -z "$installed_nettle_version" -a \ + "$installed_nettle_version" != "$NETTLE_VERSION" ] ; then + echo "Installed Nettle version is $installed_nettle_version" + if [ -z "$NETTLE_VERSION" ] ; then + echo "Nettle is not requested" + else + echo "Requested Nettle version is $NETTLE_VERSION" + fi + uninstall_nettle -r + fi + + if [ ! -z "$installed_gmp_version" -a \ + "$installed_gmp_version" != "$GMP_VERSION" ] ; then + echo "Installed GMP version is $installed_gmp_version" + if [ -z "$GMP_VERSION" ] ; then + echo "GMP is not requested" + else + echo "Requested GMP version is $GMP_VERSION" + fi + uninstall_gmp -r + fi + + if [ ! -z "$installed_p11_kit_version" -a \ + "$installed_p11_kit_version" != "$P11KIT_VERSION" ] ; then + echo "Installed p11-kit version is $installed_p11_kit_version" + if [ -z "$P11KIT_VERSION" ] ; then + echo "p11-kit is not requested" + else + echo "Requested p11-kit version is $P11KIT_VERSION" + fi + uninstall_p11_kit -r + fi + + if [ ! -z "$installed_libtasn1_version" -a \ + "$installed_libtasn1_version" != "$LIBTASN1_VERSION" ] ; then + echo "Installed libtasn1 version is $installed_libtasn1_version" + if [ -z "$LIBTASN1_VERSION" ] ; then + echo "libtasn1 is not requested" + else + echo "Requested libtasn1 version is $LIBTASN1_VERSION" + fi + uninstall_libtasn1 -r + fi + + if [ ! -z "$installed_libgcrypt_version" -a \ + "$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then + echo "Installed libgcrypt version is $installed_libgcrypt_version" + if [ -z "$LIBGCRYPT_VERSION" ] ; then + echo "libgcrypt is not requested" + else + echo "Requested libgcrypt version is $LIBGCRYPT_VERSION" + fi + uninstall_libgcrypt -r + fi + + if [ ! -z "$installed_libgpg_error_version" -a \ + "$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then + echo "Installed libgpg-error version is $installed_libgpg_error_version" + if [ -z "$LIBGPG_ERROR_VERSION" ] ; then + echo "libgpg-error is not requested" + else + echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION" + fi + uninstall_libgpg_error -r + fi + + if [ ! -z "$installed_libsmi_version" -a \ + "$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then + echo "Installed libsmi version is $installed_libsmi_version" + if [ -z "$LIBSMI_VERSION" ] ; then + echo "libsmi is not requested" + else + echo "Requested libsmi version is $LIBSMI_VERSION" + fi + uninstall_libsmi -r + fi + + if [ ! -z "$installed_qt_version" -a \ + "$installed_qt_version" != "$QT_VERSION" ] ; then + echo "Installed Qt version is $installed_qt_version" + if [ -z "$QT_VERSION" ] ; then + echo "Qt is not requested" + else + echo "Requested Qt version is $QT_VERSION" + fi + uninstall_qt -r + fi + + if [ ! -z "$installed_glib_version" -a \ + "$installed_glib_version" != "$GLIB_VERSION" ] ; then + echo "Installed GLib version is $installed_glib_version" + if [ -z "$GLIB_VERSION" ] ; then + echo "GLib is not requested" + else + echo "Requested GLib version is $GLIB_VERSION" + fi + uninstall_glib -r + fi + + if [ ! -z "$installed_pkg_config_version" -a \ + "$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then + echo "Installed pkg-config version is $installed_pkg_config_version" + if [ -z "$PKG_CONFIG_VERSION" ] ; then + echo "pkg-config is not requested" + else + echo "Requested pkg-config version is $PKG_CONFIG_VERSION" + fi + uninstall_pkg_config -r + fi + + if [ ! -z "$installed_gettext_version" -a \ + "$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then + echo "Installed GNU gettext version is $installed_gettext_version" + if [ -z "$GETTEXT_VERSION" ] ; then + echo "GNU gettext is not requested" + else + echo "Requested GNU gettext version is $GETTEXT_VERSION" + fi + uninstall_gettext -r + fi + + if [ ! -z "$installed_ninja_version" -a \ + "$installed_ninja_version" != "$NINJA_VERSION" ] ; then + echo "Installed Ninja version is $installed_ninja_version" + if [ -z "$NINJA_VERSION" ] ; then + echo "Ninja is not requested" + else + echo "Requested Ninja version is $NINJA_VERSION" + fi + uninstall_ninja -r + fi + + if [ ! -z "$installed_asciidoctorpdf_version" -a \ + "$installed_asciidoctorpdf_version" != "$ASCIIDOCTORPDF_VERSION" ] ; then + echo "Installed Asciidoctor-pdf version is $installed_asciidoctorpdf_version" + if [ -z "$ASCIIDOCTORPDF_VERSION" ] ; then + echo "Asciidoctor-pdf is not requested" + else + echo "Requested Asciidoctor-pdf version is $ASCIIDOCTORPDF_VERSION" + fi + # XXX - really remove this? + # Or should we remember it as installed only if this script + # installed it? + # + uninstall_asciidoctorpdf -r + fi + + if [ ! -z "$installed_asciidoctor_version" -a \ + "$installed_asciidoctor_version" != "$ASCIIDOCTOR_VERSION" ] ; then + echo "Installed Asciidoctor version is $installed_asciidoctor_version" + if [ -z "$ASCIIDOCTOR_VERSION" ] ; then + echo "Asciidoctor is not requested" + else + echo "Requested Asciidoctor version is $ASCIIDOCTOR_VERSION" + fi + # XXX - really remove this? + # Or should we remember it as installed only if this script + # installed it? + # + uninstall_asciidoctor -r + fi + + if [ ! -z "$installed_cmake_version" -a \ + "$installed_cmake_version" != "$CMAKE_VERSION" ] ; then + echo "Installed CMake version is $installed_cmake_version" + if [ -z "$CMAKE_VERSION" ] ; then + echo "CMake is not requested" + else + echo "Requested CMake version is $CMAKE_VERSION" + fi + uninstall_cmake -r + fi + + if [ ! -z "$installed_libtool_version" -a \ + "$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then + echo "Installed GNU libtool version is $installed_libtool_version" + if [ -z "$LIBTOOL_VERSION" ] ; then + echo "GNU libtool is not requested" + else + echo "Requested GNU libtool version is $LIBTOOL_VERSION" + fi + uninstall_libtool -r + fi + + if [ ! -z "$installed_automake_version" -a \ + "$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then + echo "Installed GNU automake version is $installed_automake_version" + if [ -z "$AUTOMAKE_VERSION" ] ; then + echo "GNU automake is not requested" + else + echo "Requested GNU automake version is $AUTOMAKE_VERSION" + fi + uninstall_automake -r + fi + + if [ ! -z "$installed_autoconf_version" -a \ + "$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then + echo "Installed GNU autoconf version is $installed_autoconf_version" + if [ -z "$AUTOCONF_VERSION" ] ; then + echo "GNU autoconf is not requested" + else + echo "Requested GNU autoconf version is $AUTOCONF_VERSION" + fi + uninstall_autoconf -r + fi + + if [ ! -z "$installed_pcre_version" -a \ + "$installed_pcre_version" != "$PCRE_VERSION" ] ; then + echo "Installed pcre version is $installed_pcre_version" + if [ -z "$PCRE_VERSION" ] ; then + echo "pcre is not requested" + else + echo "Requested pcre version is $PCRE_VERSION" + fi + uninstall_pcre -r + fi + + if [ -n "$installed_pcre2_version" -a \ + "$installed_pcre2_version" != "$PCRE2_VERSION" ] ; then + echo "Installed pcre2 version is $installed_pcre2_version" + if [ -z "$PCRE2_VERSION" ] ; then + echo "pcre2 is not requested" + else + echo "Requested pcre2 version is $PCRE2_VERSION" + fi + uninstall_pcre2 -r + fi + + if [ ! -z "$installed_lzip_version" -a \ + "$installed_lzip_version" != "$LZIP_VERSION" ] ; then + echo "Installed lzip version is $installed_lzip_version" + if [ -z "$LZIP_VERSION" ] ; then + echo "lzip is not requested" + else + echo "Requested lzip version is $LZIP_VERSION" + fi + uninstall_lzip -r + fi + + if [ ! -z "$installed_xz_version" -a \ + "$installed_xz_version" != "$XZ_VERSION" ] ; then + echo "Installed xz version is $installed_xz_version" + if [ -z "$XZ_VERSION" ] ; then + echo "xz is not requested" + else + echo "Requested xz version is $XZ_VERSION" + fi + uninstall_xz -r + fi + + if [ ! -z "$installed_curl_version" -a \ + "$installed_curl_version" != "$CURL_VERSION" ] ; then + echo "Installed curl version is $installed_curl_version" + if [ -z "$CURL_VERSION" ] ; then + echo "curl is not requested" + else + echo "Requested curl version is $CURL_VERSION" + fi + uninstall_curl -r + fi + + if [ ! -z "$installed_minizip_version" -a \ + "$installed_minizip_version" != "$ZLIB_VERSION" ] ; then + echo "Installed minizip (zlib) version is $installed_minizip_version" + if [ -z "$ZLIB_VERSION" ] ; then + echo "minizip is not requested" + else + echo "Requested minizip (zlib) version is $ZLIB_VERSION" + fi + uninstall_minizip -r + fi + + if [ ! -z "$installed_sparkle_version" -a \ + "$installed_sparkle_version" != "$SPARKLE_VERSION" ] ; then + echo "Installed Sparkle version is $installed_sparkle_version" + if [ -z "$SPARKLE_VERSION" ] ; then + echo "Sparkle is not requested" + else + echo "Requested Sparkle version is $SPARKLE_VERSION" + fi + uninstall_sparkle -r + fi + + # + # Start with curl: we may need it to download and install xz. + # + install_curl + + # + # Now intall xz: it is the sole download format of glib later than 2.31.2. + # + install_xz + + install_lzip + + install_pcre + + install_autoconf + + install_automake + + install_libtool + + install_cmake + + install_pcre2 + + # + # Install Python 3 now; not only is it needed for the Wireshark + # build process, it's also needed for the Meson build system, + # which newer versions of GLib use as their build system. + # + install_python3 + + # + # Now install Meson and pytest. + # + install_meson + + install_pytest + + install_ninja + + install_asciidoctor + + install_asciidoctorpdf + + # + # Start with GNU gettext; GLib requires it, and macOS doesn't have it + # or a BSD-licensed replacement. + # + # At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2 + # by default, which causes, for example, stpncpy to be defined as + # a hairy macro that collides with the GNU gettext configure script's + # attempts to workaround AIX's lack of a declaration for stpncpy, + # with the result being a huge train wreck. Define _FORTIFY_SOURCE + # as 0 in an attempt to keep the trains on separate tracks. + # + install_gettext + + # + # GLib depends on pkg-config. + # By default, pkg-config depends on GLib; we break the dependency cycle + # by configuring pkg-config to use its own internal version of GLib. + # + install_pkg_config + + install_glib + + # + # Now we have reached a point where we can build everything but + # the GUI (Wireshark). + # + install_qt + + # + # Now we have reached a point where we can build everything including + # the GUI (Wireshark), but not with any optional features such as + # SNMP OID resolution, some forms of decryption, Lua scripting, playback + # of audio, or MaxMindDB mapping of IP addresses. + # + # We now conditionally download optional libraries to support them; + # the default is to download them all. + # + + install_libsmi + + install_libgpg_error + + install_libgcrypt + + install_gmp + + install_libtasn1 + + install_p11_kit + + install_nettle + + install_gnutls + + install_lua + + install_snappy + + install_zstd + + install_libxml2 + + install_lz4 + + install_sbc + + install_maxminddb + + install_c_ares + + install_libssh + + install_nghttp2 + + install_nghttp3 + + install_libtiff + + install_spandsp + + install_speexdsp + + install_bcg729 + + install_ilbc + + install_opus + + install_brotli + + install_minizip + + install_sparkle +} + +uninstall_all() { + if [ -d "${MACOSX_SUPPORT_LIBS}" ] + then + cd "${MACOSX_SUPPORT_LIBS}" + + # + # Uninstall items in the reverse order from the order in which they're + # installed. Only uninstall if the download/build/install process + # completed; uninstall the version that appears in the name of + # the -done file. + # + # We also do a "make distclean", so that we don't have leftovers from + # old configurations. + # + uninstall_sparkle + + uninstall_minizip + + uninstall_brotli + + uninstall_opus + + uninstall_ilbc + + uninstall_bcg729 + + uninstall_speexdsp + + uninstall_spandsp + + uninstall_libtiff + + uninstall_nghttp2 + + uninstall_nghttp3 + + uninstall_libssh + + uninstall_c_ares + + uninstall_maxminddb + + uninstall_snappy + + uninstall_zstd + + uninstall_libxml2 + + uninstall_lz4 + + uninstall_sbc + + uninstall_lua + + uninstall_gnutls + + uninstall_nettle + + uninstall_p11_kit + + uninstall_libtasn1 + + uninstall_gmp + + uninstall_libgcrypt + + uninstall_libgpg_error + + uninstall_libsmi + + uninstall_qt + + uninstall_glib + + uninstall_pkg_config + + uninstall_gettext + + uninstall_ninja + + # + # XXX - really remove this? + # Or should we remember it as installed only if this script + # installed it? + # + uninstall_asciidoctorpdf + + uninstall_asciidoctor + + uninstall_pytest + + uninstall_meson + + uninstall_python3 + + uninstall_cmake + + uninstall_libtool + + uninstall_automake + + uninstall_autoconf + + uninstall_pcre + + uninstall_lzip + + uninstall_xz + + uninstall_curl + fi +} + +# +# Do we have permission to write in /usr/local? +# +# If so, assume we have permission to write in its subdirectories. +# (If that's not the case, this test needs to check the subdirectories +# as well.) +# +# If not, do "make install", "make uninstall", "ninja install", +# "ninja uninstall", the removes for dependencies that don't support +# "make uninstall" or "ninja uninstall", the renames of [g]libtool*, +# and the writing of a libffi .pc file with sudo. +# +if [ -w /usr/local ] +then + DO_MAKE_INSTALL="make install" + DO_MAKE_UNINSTALL="make uninstall" + DO_NINJA_INSTALL="ninja -C _build install" + DO_NINJA_UNINSTALL="ninja -C _build uninstall" + DO_TEE_TO_PC_FILE="tee" + DO_RM="rm" + DO_MV="mv" +else + DO_MAKE_INSTALL="sudo make install" + DO_MAKE_UNINSTALL="sudo make uninstall" + DO_NINJA_INSTALL="sudo ninja -C _build install" + DO_NINJA_UNINSTALL="sudo ninja -C _build uninstall" + DO_TEE_TO_PC_FILE="sudo tee" + DO_RM="sudo rm" + DO_MV="sudo mv" +fi + +# +# When building with CMake, don't build libraries with an install path +# that begins with @rpath because that will cause binaries linked with it +# to use that path as the library to look for, and that will cause the +# run-time linker, at least on macOS 14 and later, not to find the library +# in /usr/local/lib unless you explicitly set DYLD_LIBRARY_PATH to include +# /usr/local/lib. That means that you get "didn't find libpcre" errors if +# you try to run binaries from a build unless you set DYLD_LIBRARYPATH to +# include /usr/local/lib. +# +# However, setting CMAKE_MACOSX_RPATH to OFF causes the installed +# library just to have the file name of the library as its install +# name. It needs to be the full installed path of the library in +# order to make running binaries from the build directory work, so +# we set CMAKE_INSTALL_NAME_DIR to /usr/local/lib. +# +# packaging/macosx/osx-app.sh will convert *all* libraries in +# the app bundle to have an @rpath install name, so this won't +# break anything there; it just fixes the ability to run from the +# build directory. +# +DO_CMAKE="cmake -DCMAKE_MACOSX_RPATH=OFF -DCMAKE_INSTALL_NAME_DIR=/usr/local/lib" + +# This script is meant to be run in the source root. The following +# code will attempt to get you there, but is not perfect (particulary +# if someone copies the script). + +topdir=`pwd`/`dirname $0`/.. +cd $topdir + +# Preference of the support libraries directory: +# ${MACOSX_SUPPORT_LIBS} +# ../macosx-support-libs +# ./macosx-support-libs (default if none exists) +if [ ! -d "${MACOSX_SUPPORT_LIBS}" ]; then + unset MACOSX_SUPPORT_LIBS +fi +if [ -d ../macosx-support-libs ]; then + MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-../macosx-support-libs} +else + MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-./macosx-support-libs} +fi + +# +# If we have SDKs available, the default target OS is the major version +# of the one we're running; get that and strip off the third component +# if present. +# +for i in /Developer/SDKs \ + /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ + /Library/Developer/CommandLineTools/SDKs +do + if [ -d "$i" ] + then + min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'` + break + fi +done + +# +# Parse command-line flags: +# +# -h - print help. +# -t <target> - build libraries so that they'll work on the specified +# version of macOS and later versions. +# -u - do an uninstall. +# -n - download all packages, but don't build or install. +# + +no_build=false + +while getopts ht:un name +do + case $name in + u) + do_uninstall=yes + ;; + n) + no_build=true + ;; + t) + min_osx_target="$OPTARG" + ;; + h|?) + echo "Usage: macos-setup.sh [ -t <target> ] [ -u ] [ -n ]" 1>&1 + exit 0 + ;; + esac +done + +# +# Get the version numbers of installed packages, if any. +# +if [ -d "${MACOSX_SUPPORT_LIBS}" ] +then + cd "${MACOSX_SUPPORT_LIBS}" + + installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'` + installed_lzip_version=`ls lzip-*-done 2>/dev/null | sed 's/lzip-\(.*\)-done/\1/'` + installed_pcre_version=`ls pcre-*-done 2>/dev/null | sed 's/pcre-\(.*\)-done/\1/'` + installed_pcre2_version=$(ls pcre2-*-done 2>/dev/null | sed 's/pcre2-\(.*\)-done/\1/') + installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'` + installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'` + installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'` + installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'` + installed_ninja_version=`ls ninja-*-done 2>/dev/null | sed 's/ninja-\(.*\)-done/\1/'` + installed_asciidoctor_version=`ls asciidoctor-*-done 2>/dev/null | sed 's/asciidoctor-\(.*\)-done/\1/'` + installed_asciidoctorpdf_version=`ls asciidoctorpdf-*-done 2>/dev/null | sed 's/asciidoctorpdf-\(.*\)-done/\1/'` + installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'` + installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'` + installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'` + installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'` + installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'` + installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'` + installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'` + installed_gmp_version=`ls gmp-*-done 2>/dev/null | sed 's/gmp-\(.*\)-done/\1/'` + installed_libtasn1_version=`ls libtasn1-*-done 2>/dev/null | sed 's/libtasn1-\(.*\)-done/\1/'` + installed_p11_kit_version=`ls p11-kit-*-done 2>/dev/null | sed 's/p11-kit-\(.*\)-done/\1/'` + installed_nettle_version=`ls nettle-*-done 2>/dev/null | sed 's/nettle-\(.*\)-done/\1/'` + installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'` + installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'` + installed_snappy_version=`ls snappy-*-done 2>/dev/null | sed 's/snappy-\(.*\)-done/\1/'` + installed_zstd_version=`ls zstd-*-done 2>/dev/null | sed 's/zstd-\(.*\)-done/\1/'` + installed_libxml2_version=`ls libxml2-*-done 2>/dev/null | sed 's/libxml2-\(.*\)-done/\1/'` + installed_lz4_version=`ls lz4-*-done 2>/dev/null | sed 's/lz4-\(.*\)-done/\1/'` + installed_sbc_version=`ls sbc-*-done 2>/dev/null | sed 's/sbc-\(.*\)-done/\1/'` + installed_maxminddb_version=`ls maxminddb-*-done 2>/dev/null | sed 's/maxminddb-\(.*\)-done/\1/'` + installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'` + installed_libssh_version=`ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/'` + installed_nghttp2_version=`ls nghttp2-*-done 2>/dev/null | sed 's/nghttp2-\(.*\)-done/\1/'` + installed_nghttp3_version=`ls nghttp3-*-done 2>/dev/null | sed 's/nghttp3-\(.*\)-done/\1/'` + installed_libtiff_version=`ls tiff-*-done 2>/dev/null | sed 's/tiff-\(.*\)-done/\1/'` + installed_spandsp_version=`ls spandsp-*-done 2>/dev/null | sed 's/spandsp-\(.*\)-done/\1/'` + installed_speexdsp_version=`ls speexdsp-*-done 2>/dev/null | sed 's/speexdsp-\(.*\)-done/\1/'` + installed_bcg729_version=`ls bcg729-*-done 2>/dev/null | sed 's/bcg729-\(.*\)-done/\1/'` + installed_ilbc_version=`ls ilbc-*-done 2>/dev/null | sed 's/ilbc-\(.*\)-done/\1/'` + installed_opus_version=`ls opus-*-done 2>/dev/null | sed 's/opus-\(.*\)-done/\1/'` + installed_python3_version=`ls python3-*-done 2>/dev/null | sed 's/python3-\(.*\)-done/\1/'` + installed_brotli_version=`ls brotli-*-done 2>/dev/null | sed 's/brotli-\(.*\)-done/\1/'` + installed_minizip_version=`ls minizip-*-done 2>/dev/null | sed 's/minizip-\(.*\)-done/\1/'` + installed_sparkle_version=`ls sparkle-*-done 2>/dev/null | sed 's/sparkle-\(.*\)-done/\1/'` + + cd $topdir +fi + +if [ "$do_uninstall" = "yes" ] +then + uninstall_all + exit 0 +fi + +# +# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if +# invoked without CFLAGS or CXXFLAGS being set in the environment. +# +# However, we *are* setting them in the environment, for our own +# nefarious purposes, so start them out as "-g -O2". +# +CFLAGS="-g -O2" +CXXFLAGS="-g -O2" + +# if no make options are present, set default options +if [ -z "$MAKE_BUILD_OPTS" ] ; then + # by default use 1.5x number of cores for parallel build + MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))" +fi + +# +# If we have a target release, look for the oldest SDK that's for an +# OS equal to or later than that one, and build libraries against it +# rather than against the headers and, more importantly, libraries +# that come with the OS, so that we don't end up with support libraries +# that only work on the OS version on which we built them, not earlier +# versions of the same release, or earlier releases if the minimum is +# earlier. +# +if [ ! -z "$min_osx_target" ] +then + # + # Get the major and minor version of the target release. + # We assume it'll be a while before there's a macOS 100. :-) + # + case "$min_osx_target" in + + [1-9][0-9].*) + # + # major.minor. + # + min_osx_target_major=`echo "$min_osx_target" | sed -n 's/\([1-9][0-9]*\)\..*/\1/p'` + min_osx_target_minor=`echo "$min_osx_target" | sed -n 's/[1-9][0-9]*\.\(.*\)/\1/p'` + ;; + + [1-9][0-9]) + # + # Just a major version number was specified; make the minor + # version 0. + # + min_osx_target_major="$min_osx_target" + min_osx_target_minor=0 + ;; + + *) + echo "macosx-setup.sh: Invalid target release $min_osx_target" 1>&2 + exit 1 + ;; + esac + + # + # Search each directory that might contain SDKs. + # + sdkpath="" + for sdksdir in /Developer/SDKs \ + /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ + /Library/Developer/CommandLineTools/SDKs + do + # + # Get a list of all the SDKs. + # + if ! test -d "$sdksdir" + then + # + # There is no directory with that name. + # Move on to the next one in the list, if any. + # + continue + fi + + # + # Get a list of all the SDKs in that directory, if any. + # We assume it'll be a while before there's a macOS 100. :-) + # + sdklist=`(cd "$sdksdir"; ls -d MacOSX[1-9][0-9].[0-9]*.sdk 2>/dev/null)` + + for sdk in $sdklist + do + # + # Get the major and minor version for this SDK. + # + sdk_major=`echo "$sdk" | sed -n 's/MacOSX\([1-9][0-9]*\)\..*\.sdk/\1/p'` + sdk_minor=`echo "$sdk" | sed -n 's/MacOSX[1-9][0-9]*\.\(.*\)\.sdk/\1/p'` + + # + # Is it for the deployment target or some later release? + # Starting with major 11, the minor version no longer matters. + # + if test "$sdk_major" -gt "$min_osx_target_major" -o \ + \( "$sdk_major" -eq "$min_osx_target_major" -a \ + \( "$sdk_major" -ge 11 -o \ + "$sdk_minor" -ge "$min_osx_target_minor" \) \) + then + # + # Yes, use it. + # + sdkpath="$sdksdir/$sdk" + break 2 + fi + done + done + + if [ -z "$sdkpath" ] + then + echo "macos-setup.sh: Couldn't find an SDK for macOS $min_osx_target or later" 1>&2 + exit 1 + fi + + SDKPATH="$sdkpath" + echo "Using the $sdk_major.$sdk_minor SDK" + + # + # Make sure there are links to /usr/local/include and /usr/local/lib + # in the SDK's usr/local. + # + if [ ! -e $SDKPATH/usr/local/include ] + then + if [ ! -d $SDKPATH/usr/local ] + then + sudo mkdir $SDKPATH/usr/local + fi + sudo ln -s /usr/local/include $SDKPATH/usr/local/include + fi + if [ ! -e $SDKPATH/usr/local/lib ] + then + if [ ! -d $SDKPATH/usr/local ] + then + sudo mkdir $SDKPATH/usr/local + fi + sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib + fi + + # + # Set the minimum OS version for which to build to the specified + # minimum target OS version, so we don't, for example, end up using + # linker features supported by the OS verson on which we're building + # but not by the target version. + # + VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target" + + # + # Compile and link against the SDK. + # + SDKFLAGS="-isysroot $SDKPATH" + +fi + +export CFLAGS +export CXXFLAGS + +# +# You need Xcode or the command-line tools installed to get the compilers (xcrun checks both). +# + if [ ! -x /usr/bin/xcrun ]; then + echo "Please install Xcode (app or command line) first (should be available on DVD or from the Mac App Store)." + exit 1 +fi + +if [ "$QT_VERSION" ]; then + # + # We need Xcode, not just the command-line tools, installed to build + # Qt. + # + # At least with Xcode 8, /usr/bin/xcodebuild --help fails if only + # the command-line tools are installed and succeeds if Xcode is + # installed. Unfortunately, it fails *with* Xcode 3, but + # /usr/bin/xcodebuild -version works with that and with Xcode 8. + # Hopefully it fails with only the command-line tools installed. + # + if /usr/bin/xcodebuild -version >/dev/null 2>&1; then + : + elif qmake --version >/dev/null 2>&1; then + : + else + echo "Please install Xcode first (should be available on DVD or from the Mac App Store)." + echo "The command-line build tools are not sufficient to build Qt." + echo "Alternatively build QT according to: https://gist.github.com/shoogle/750a330c851bd1a924dfe1346b0b4a08#:~:text=MacOS%2FQt%5C%20Creator-,Go%20to%20Qt%20Creator%20%3E%20Preferences%20%3E%20Build%20%26%20Run%20%3E%20Kits,for%20both%20compilers%2C%20not%20gcc%20." + exit 1 + fi +fi + +export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig + +# +# Do all the downloads and untarring in a subdirectory, so all that +# stuff can be removed once we've installed the support libraries. + +if [ ! -d "${MACOSX_SUPPORT_LIBS}" ] +then + mkdir "${MACOSX_SUPPORT_LIBS}" || exit 1 +fi +cd "${MACOSX_SUPPORT_LIBS}" + +install_all + +echo "" + +# +# Indicate what paths to use for pkg-config and cmake. +# +pkg_config_path=/usr/local/lib/pkgconfig +if [ "$QT_VERSION" ]; then + qt_base_path=$HOME/Qt$QT_VERSION/$QT_VERSION/clang_64 + pkg_config_path="$pkg_config_path":"$qt_base_path/lib/pkgconfig" + CMAKE_PREFIX_PATH="$CMAKE_PREFIX_PATH":"$qt_base_path/lib/cmake" +fi + +if $no_build; then + echo "All required dependencies downloaded. Run without -n to install them." + exit 0 +fi + +if [ "$QT_VERSION" ]; then + if [ -f qt-$QT_VERSION-done ]; then + echo "You are now prepared to build Wireshark." + else + echo "Qt was not installed; you will have to install it in order to build the" + echo "Wireshark application, but you can build all the command-line tools in" + echo "the Wireshark distribution." + echo "" + echo "See section 2.1.1. \"Build environment setup\" of the Wireshark Developer's" + echo "Guide for instructions on how to install Qt." + fi +else + echo "You did not install Qt; you will have to install it in order to build" + echo "the Wireshark application, but you can build all the command-line tools in" + echo "the Wireshark distribution." +fi +echo +echo "To build:" +echo +echo "export PKG_CONFIG_PATH=$pkg_config_path" +echo "export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH" +echo "export PATH=$PATH:$qt_base_path/bin" +echo +echo "mkdir build; cd build" +if [ ! -z "$NINJA_VERSION" ]; then + echo "cmake -G Ninja .." + echo "ninja wireshark_app_bundle logray_app_bundle # (Modify as needed)" + echo "ninja install/strip" +else + echo "cmake .." + echo "make $MAKE_BUILD_OPTS wireshark_app_bundle logray_app_bundle # (Modify as needed)" + echo "make install/strip" +fi +echo +echo "Make sure you are allowed capture access to the network devices" +echo "See: https://gitlab.com/wireshark/wireshark/-/wikis/CaptureSetup/CapturePrivileges" +echo + +exit 0 |