#!/bin/bash # Setup development environment on macOS (tested with 10.6.8 and Xcode # 3.2.6 and with 10.12.4 and Xcode 8.3). # # Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file) # # Wireshark - Network traffic analyzer # By Gerald Combs # Copyright 1998 Gerald Combs # # SPDX-License-Identifier: GPL-2.0-or-later shopt -s extglob # # Get the major version of Darwin, so we can check the major macOS # version. # DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'` # # The minimum supported version of Qt is 5.9, so the minimum supported version # of macOS is OS X 10.10 (Yosemite), aka Darwin 14.0. # if [[ $DARWIN_MAJOR_VERSION -lt 14 ]]; then echo "This script does not support any versions of macOS before Yosemite" 1>&2 exit 1 fi # # Get the processor architecture of Darwin. Currently supported: arm, i386 # DARWIN_PROCESSOR_ARCH=`uname -p` if [ "$DARWIN_PROCESSOR_ARCH" != "arm" -a "$DARWIN_PROCESSOR_ARCH" != "i386" ]; then echo "This script does not support this processor architecture" 1>&2 exit 1 fi # # Versions of packages to download and install. # # # We use curl, but older versions of curl in older macOS releases can't # handle some sites - including the xz site. # # If the version of curl in the system is older than 7.54.0, download # curl and install it. # current_curl_version=`curl --version | sed -n 's/curl \([0-9.]*\) .*/\1/p'` current_curl_major_version="`expr $current_curl_version : '\([0-9][0-9]*\).*'`" current_curl_minor_version="`expr $current_curl_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" if [[ $current_curl_major_version -lt 7 || ($current_curl_major_version -eq 7 && $current_curl_minor_version -lt 54) ]]; then CURL_VERSION=${CURL_VERSION-7.60.0} fi # # Some packages need xz to unpack their current source. # XXX: tar, since macOS 10.9, can uncompress xz'ed tarballs, # so perhaps we could get rid of this now? # # DO NOT UPDATE THIS TO A COMPROMISED VERSION; see # # https://www.openwall.com/lists/oss-security/2024/03/29/4 # # https://access.redhat.com/security/cve/CVE-2024-3094 # # https://nvd.nist.gov/vuln/detail/CVE-2024-3094 # XZ_VERSION=5.2.5 # # Some packages need lzip to unpack their current source. # LZIP_VERSION=1.21 # # The version of libPCRE on Catalina is insufficient to build glib due to # missing UTF-8 support. # PCRE_VERSION=8.45 # # CMake is required to do the build - and to build some of the # dependencies. # CMAKE_VERSION=${CMAKE_VERSION-3.21.4} # # Ninja isn't required, as make is provided with Xcode, but it is # claimed to build faster than make. # Comment it out if you don't want it. # NINJA_VERSION=${NINJA_VERSION-1.10.2} # # The following libraries and tools are required even to build only TShark. # GETTEXT_VERSION=0.21 GLIB_VERSION=2.76.6 if [ "$GLIB_VERSION" ]; then GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`" GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GLIB_MAJOR_MINOR_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION GLIB_MAJOR_MINOR_DOTDOT_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_DOTDOT_VERSION fi PKG_CONFIG_VERSION=0.29.2 # # libgpg-error is required for libgcrypt. # LIBGPG_ERROR_VERSION=1.39 # # libgcrypt is required. # LIBGCRYPT_VERSION=1.8.7 # # libpcre2 is required. # PCRE2_VERSION=10.39 # # One or more of the following libraries are required to build Wireshark. # # To override the version of Qt call the script with some of the variables # set to the new values. Setting the variable to empty will disable building # the toolkit and will uninstall # any version previously installed by the # script, e.g. # "QT_VERSION=5.10.1 ./macos-setup.sh" # will build and install with QT 5.10.1. # QT_VERSION=${QT_VERSION-6.2.4} if [ "$QT_VERSION" ]; then QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`" QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION QT_MAJOR_MINOR_DOTDOT_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION.$QT_DOTDOT_VERSION fi # # The following libraries are optional. # Comment them out if you don't want them, but note that some of # the optional libraries are required by other optional libraries. # LIBSMI_VERSION=0.4.8 GNUTLS_VERSION=3.7.8 if [ "$GNUTLS_VERSION" ]; then # # We'll be building GnuTLS, so we may need some additional libraries. # We assume GnuTLS can work with Nettle; newer versions *only* use # Nettle, not libgcrypt. # GNUTLS_MAJOR_VERSION="`expr $GNUTLS_VERSION : '\([0-9][0-9]*\).*'`" GNUTLS_MINOR_VERSION="`expr $GNUTLS_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" NETTLE_VERSION=3.9.1 # # And, in turn, Nettle requires GMP. # GMP_VERSION=6.3.0 # # And p11-kit P11KIT_VERSION=0.25.0 # Which requires libtasn1 LIBTASN1_VERSION=4.19.0 fi # Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3 # yet, and we need to check for compatibility issues (we'd want Lua # scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua # features present in all three versions) LUA_VERSION=5.2.4 SNAPPY_VERSION=1.1.10 ZSTD_VERSION=1.5.5 LIBXML2_VERSION=2.11.5 LZ4_VERSION=1.9.4 SBC_VERSION=2.0 CARES_VERSION=1.19.1 LIBSSH_VERSION=0.10.5 # mmdbresolve MAXMINDDB_VERSION=1.4.3 NGHTTP2_VERSION=1.56.0 NGHTTP3_VERSION=0.15.0 SPANDSP_VERSION=0.0.6 SPEEXDSP_VERSION=1.2.1 if [ "$SPANDSP_VERSION" ]; then # # SpanDSP depends on libtiff. # LIBTIFF_VERSION=3.8.1 fi BCG729_VERSION=1.1.1 # libilbc 3.0.0 & later link with absiel, which is released under Apache 2.0 ILBC_VERSION=2.0.2 OPUS_VERSION=1.4 # # Is /usr/bin/python3 a working version of Python? It may be, as it # might be a wrapper that runs the Python 3 that's part of Xcode. # if /usr/bin/python3 --version >/dev/null 2>&1 then # # Yes - don't bother installing Python 3 from elsewhere # : else # # No - install a Python package. # PYTHON3_VERSION=3.9.5 fi BROTLI_VERSION=1.0.9 # minizip ZLIB_VERSION=1.3 # Uncomment to enable automatic updates using Sparkle #SPARKLE_VERSION=2.1.0 # # Asciidoctor is required to build the documentation. # ASCIIDOCTOR_VERSION=${ASCIIDOCTOR_VERSION-2.0.16} ASCIIDOCTORPDF_VERSION=${ASCIIDOCTORPDF_VERSION-1.6.1} # # GNU autotools. They're not supplied with the macOS versions we # support, and we currently use them for minizip. # AUTOCONF_VERSION=2.71 AUTOMAKE_VERSION=1.16.5 LIBTOOL_VERSION=2.4.6 install_curl() { if [ "$CURL_VERSION" -a ! -f curl-$CURL_VERSION-done ] ; then echo "Downloading, building, and installing curl:" [ -f curl-$CURL_VERSION.tar.bz2 ] || curl -L -O https://curl.haxx.se/download/curl-$CURL_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat curl-$CURL_VERSION.tar.bz2 | tar xf - || exit 1 cd curl-$CURL_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch curl-$CURL_VERSION-done fi } uninstall_curl() { if [ ! -z "$installed_curl_version" ] ; then echo "Uninstalling curl:" cd curl-$installed_curl_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm curl-$installed_curl_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf curl-$installed_curl_version rm -rf curl-$installed_curl_version.tar.bz2 fi installed_curl_version="" fi } install_xz() { if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then echo "Downloading, building, and installing xz:" [ -f xz-$XZ_VERSION.tar.bz2 ] || curl -L -O https://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1 cd xz-$XZ_VERSION # # This builds and installs liblzma, which libxml2 uses, and # Wireshark uses liblzma, so we need to build this with # all the minimum-deployment-version and SDK stuff. # CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch xz-$XZ_VERSION-done fi } uninstall_xz() { if [ ! -z "$installed_xz_version" ] ; then echo "Uninstalling xz:" cd xz-$installed_xz_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm xz-$installed_xz_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf xz-$installed_xz_version rm -rf xz-$installed_xz_version.tar.bz2 fi installed_xz_version="" fi } install_lzip() { if [ "$LZIP_VERSION" -a ! -f lzip-$LZIP_VERSION-done ] ; then echo "Downloading, building, and installing lzip:" [ -f lzip-$LZIP_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/lzip/lzip-$LZIP_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat lzip-$LZIP_VERSION.tar.gz | tar xf - || exit 1 cd lzip-$LZIP_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lzip-$LZIP_VERSION-done fi } uninstall_lzip() { if [ ! -z "$installed_lzip_version" ] ; then echo "Uninstalling lzip:" cd lzip-$installed_lzip_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm lzip-$installed_lzip_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf lzip-$installed_lzip_version rm -rf lzip-$installed_lzip_version.tar.gz fi installed_lzip_version="" fi } install_pcre() { if [ "$PCRE_VERSION" -a ! -f pcre-$PCRE_VERSION-done ] ; then echo "Downloading, building, and installing pcre:" [ -f pcre-$PCRE_VERSION.tar.bz2 ] || curl -L -O https://sourceforge.net/projects/pcre/files/pcre/$PCRE_VERSION/pcre-$PCRE_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat pcre-$PCRE_VERSION.tar.bz2 | tar xf - || exit 1 cd pcre-$PCRE_VERSION ./configure --enable-unicode-properties || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch pcre-$PCRE_VERSION-done fi } uninstall_pcre() { if [ ! -z "$installed_pcre_version" ] ; then echo "Uninstalling pcre:" cd pcre-$installed_pcre_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm pcre-$installed_pcre_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf pcre-$installed_pcre_version rm -rf pcre-$installed_pcre_version.tar.bz2 fi installed_pcre_version="" fi } install_pcre2() { if [ "$PCRE2_VERSION" -a ! -f "pcre2-$PCRE2_VERSION-done" ] ; then echo "Downloading, building, and installing pcre2:" [ -f "pcre2-$PCRE2_VERSION.tar.bz2" ] || curl -L -O "https://github.com/PhilipHazel/pcre2/releases/download/pcre2-$PCRE2_VERSION/pcre2-10.39.tar.bz2" || exit 1 $no_build && echo "Skipping installation" && return bzcat "pcre2-$PCRE2_VERSION.tar.bz2" | tar xf - || exit 1 cd "pcre2-$PCRE2_VERSION" mkdir build_dir cd build_dir # https://github.com/Homebrew/homebrew-core/blob/master/Formula/pcre2.rb # https://github.com/microsoft/vcpkg/blob/master/ports/pcre2/portfile.cmake MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" \ $DO_CMAKE -DBUILD_STATIC_LIBS=OFF -DBUILD_SHARED_LIBS=ON -DPCRE2_SUPPORT_JIT=ON -DPCRE2_SUPPORT_UNICODE=ON .. || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch "pcre2-$PCRE2_VERSION-done" fi } uninstall_pcre2() { if [ -n "$installed_pcre2_version" ] && [ -s "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt" ] ; then echo "Uninstalling pcre2:" # PCRE2 10.39 installs pcre2unicode.3 twice, so this will return an error. while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt"; echo) rm "pcre2-$installed_pcre2_version-done" if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf "pcre2-$installed_pcre2_version" rm -rf "pcre2-$installed_pcre2_version.tar.bz2" fi installed_pcre2_version="" fi } install_autoconf() { if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then echo "Downloading, building and installing GNU autoconf..." [ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1 cd autoconf-$AUTOCONF_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch autoconf-$AUTOCONF_VERSION-done fi } uninstall_autoconf() { if [ ! -z "$installed_autoconf_version" ] ; then # # automake and libtool depend on this, so uninstall them. # uninstall_libtool "$@" uninstall_automake "$@" echo "Uninstalling GNU autoconf:" cd autoconf-$installed_autoconf_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm autoconf-$installed_autoconf_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf autoconf-$installed_autoconf_version rm -rf autoconf-$installed_autoconf_version.tar.xz fi installed_autoconf_version="" fi } install_automake() { if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then echo "Downloading, building and installing GNU automake..." [ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1 cd automake-$AUTOMAKE_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch automake-$AUTOMAKE_VERSION-done fi } uninstall_automake() { if [ ! -z "$installed_automake_version" ] ; then # # libtool depends on this(?), so uninstall it. # uninstall_libtool "$@" echo "Uninstalling GNU automake:" cd automake-$installed_automake_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm automake-$installed_automake_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf automake-$installed_automake_version rm -rf automake-$installed_automake_version.tar.xz fi installed_automake_version="" fi } install_libtool() { if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then echo "Downloading, building and installing GNU libtool..." [ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1 cd libtool-$LIBTOOL_VERSION ./configure --program-prefix=g || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libtool-$LIBTOOL_VERSION-done fi } uninstall_libtool() { if [ ! -z "$installed_libtool_version" ] ; then echo "Uninstalling GNU libtool:" cd libtool-$installed_libtool_version $DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool $DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libtool-$installed_libtool_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libtool-$installed_libtool_version rm -rf libtool-$installed_libtool_version.tar.xz fi installed_libtool_version="" fi } install_ninja() { if [ "$NINJA_VERSION" -a ! -f ninja-$NINJA_VERSION-done ] ; then echo "Downloading and installing Ninja:" # # Download the zipball, unpack it, and move the binary to # /usr/local/bin. # [ -f ninja-mac-v$NINJA_VERSION.zip ] || curl -L -o ninja-mac-v$NINJA_VERSION.zip https://github.com/ninja-build/ninja/releases/download/v$NINJA_VERSION/ninja-mac.zip || exit 1 $no_build && echo "Skipping installation" && return unzip ninja-mac-v$NINJA_VERSION.zip sudo mv ninja /usr/local/bin touch ninja-$NINJA_VERSION-done fi } uninstall_ninja() { if [ ! -z "$installed_ninja_version" ]; then echo "Uninstalling Ninja:" sudo rm /usr/local/bin/ninja rm ninja-$installed_ninja_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then rm -f ninja-mac-v$installed_ninja_version.zip fi installed_ninja_version="" fi } install_asciidoctor() { if [ ! -f asciidoctor-${ASCIIDOCTOR_VERSION}-done ]; then echo "Downloading and installing Asciidoctor:" sudo gem install -V asciidoctor --version "=${ASCIIDOCTOR_VERSION}" touch asciidoctor-${ASCIIDOCTOR_VERSION}-done fi } uninstall_asciidoctor() { if [ ! -z "$installed_asciidoctor_version" ]; then echo "Uninstalling Asciidoctor:" sudo gem uninstall -V asciidoctor --version "=${installed_asciidoctor_version}" rm asciidoctor-$installed_asciidoctor_version-done ##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version, # whatever it might happen to be called. # ## rm -f asciidoctor-$installed_asciidoctor_version ##fi installed_asciidoctor_version="" fi } install_asciidoctorpdf() { if [ ! -f asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done ]; then ## XXX gem does not track dependencies that are installed for asciidoctor-pdf ## record them for uninstallation ## ttfunk, pdf-core, prawn, prawn-table, Ascii85, ruby-rc4, hashery, afm, pdf-reader, prawn-templates, public_suffix, addressable, css_parser, prawn-svg, prawn-icon, safe_yaml, thread_safe, polyglot, treetop, asciidoctor-pdf echo "Downloading and installing Asciidoctor-pdf:" sudo gem install -V asciidoctor-pdf --version "=${ASCIIDOCTORPDF_VERSION}" touch asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done fi } uninstall_asciidoctorpdf() { if [ ! -z "$installed_asciidoctorpdf_version" ]; then echo "Uninstalling Asciidoctor:" sudo gem uninstall -V asciidoctor-pdf --version "=${installed_asciidoctorpdf_version}" ## XXX uninstall dependencies rm asciidoctorpdf-$installed_asciidoctorpdf_version-done ##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version, # whatever it might happen to be called. # ## rm -f asciidoctorpdf-$installed_asciidoctorpdf_version ##fi installed_asciidoctorpdf_version="" fi } install_cmake() { if [ ! -f cmake-$CMAKE_VERSION-done ]; then echo "Downloading and installing CMake:" CMAKE_MAJOR_VERSION="`expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'`" CMAKE_MINOR_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" CMAKE_MAJOR_MINOR_VERSION=$CMAKE_MAJOR_VERSION.$CMAKE_MINOR_VERSION # # NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the # package in question supports both 32-bit and 64-bit x86. # case "$CMAKE_MAJOR_VERSION" in 0|1|2) echo "CMake $CMAKE_VERSION" is too old 1>&2 ;; 3) # # Download the DMG and do a drag install, where "drag" means # "mv". # # 3.1.1 to 3.19.1 have a Darwin-x86_64 DMG. # 3.19.2 has a macos-universal DMG for 10.10 and later # 3.19.3 and later have a macos-universal DMG for 10.13 and later, # and a macos10.10-universal DMG for 10.10 and later. # if [ "$CMAKE_MINOR_VERSION" -lt 5 ]; then echo "CMake $CMAKE_VERSION" is too old 1>&2 elif [ "$CMAKE_MINOR_VERSION" -lt 19 -o \ "$CMAKE_VERSION" = 3.19.0 -o \ "$CMAKE_VERSION" = 3.19.1 ]; then type="Darwin-x86_64" elif [ "$CMAKE_VERSION" = 3.19.2 -o \ "$DARWIN_MAJOR_VERSION" -ge 17 ]; then type="macos-universal" else type="macos10.0-universal" fi [ -f cmake-$CMAKE_VERSION-$type.dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-$type.dmg || exit 1 $no_build && echo "Skipping installation" && return sudo hdiutil attach cmake-$CMAKE_VERSION-$type.dmg || exit 1 sudo ditto /Volumes/cmake-$CMAKE_VERSION-$type/CMake.app /Applications/CMake.app || exit 1 # # Plant the appropriate symbolic links in /usr/local/bin. # It's a drag-install, so there's no installer to make them, # and the CMake code to put them in place is lame, as # # 1) it defaults to /usr/bin, not /usr/local/bin; # 2) it doesn't request the necessary root privileges; # 3) it can't be run from the command line; # # so we do it ourselves. # for i in ccmake cmake cmake-gui cmakexbuild cpack ctest do sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i done sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-$type ;; *) ;; esac touch cmake-$CMAKE_VERSION-done fi } uninstall_cmake() { if [ ! -z "$installed_cmake_version" ]; then echo "Uninstalling CMake:" installed_cmake_major_version="`expr $installed_cmake_version : '\([0-9][0-9]*\).*'`" case "$installed_cmake_major_version" in 0|1|2) echo "CMake $installed_cmake_version" is too old 1>&2 ;; 3) sudo rm -rf /Applications/CMake.app for i in ccmake cmake cmake-gui cmakexbuild cpack ctest do sudo rm -f /usr/local/bin/$i done rm cmake-$installed_cmake_version-done ;; esac if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version, # whatever it might happen to be called. # rm -f cmake-$installed_cmake_version-Darwin-x86_64.dmg rm -f cmake-$installed_cmake_version-macos-universal.dmg rm -f cmake-$installed_cmake_version-macos10.0-universal.dmg fi installed_cmake_version="" fi } install_meson() { # # Install Meson with pip3 if we don't have it already. # if $MESON --version >/dev/null 2>&1 then # We have it. : else sudo pip3 install meson touch meson-done fi } uninstall_meson() { # # If we installed Meson, uninstal it with pip3. # if [ -f meson-done ] ; then sudo pip3 uninstall meson rm -f meson-done fi } install_pytest() { # # Install pytest with pip3 if we don't have it already. # if python3 -m pytest --version >/dev/null 2>&1 then # We have it. : else sudo pip3 install pytest pytest-xdist touch pytest-done fi } uninstall_pytest() { # # If we installed pytest, uninstal it with pip3. # if [ -f pytest-done ] ; then sudo pip3 uninstall pytest pytest-xdist rm -f pytest-done fi } install_gettext() { if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then echo "Downloading, building, and installing GNU gettext:" [ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1 cd gettext-$GETTEXT_VERSION # # This is annoying. # # GNU gettext's configuration script checks for the presence of an # implementation of iconv(). Not only does it check whether iconv() # is available, *but* it checks for certain behavior *not* specified # by POSIX that the GNU implementation provides, namely that an # attempt to convert the UTF-8 for the EURO SYMBOL chaaracter to # ISO 8859-1 results in an error. # # macOS, prior to Sierra, provided the GNU iconv library (as it's # a POSIX API). # # Sierra appears to have picked up an implementation from FreeBSD # (that implementation originated with the CITRUS project: # # http://citrus.bsdclub.org # # with additional work done to integrate it into NetBSD, and then # adopted by FreeBSD with further work done). # # That implementation does *NOT* return an error in that case; instead, # it transliterates the EURO SYMBOL to "EUR". # # Both behaviors conform to POSIX. # # This causes GNU gettext's configure script to conclude that it # should not say iconv() is available. That, unfortunately, causes # the build to fail with a linking error when trying to build # libtextstyle (a library for which we have no use, that is offered # as a separate library by the GNU project: # # https://www.gnu.org/software/gettext/libtextstyle/manual/libtextstyle.html # # and that is presumably bundled in GNU gettext because some gettext # tool depends on it). The failure appears to be due to: # # libtextstyle's exported symbols file is generated from a # template and a script that passes through only symbols # that appear in a header file that declares the symbol # as extern; # # one such header file declares iconv_ostream_create, but only # if HAVE_ICONV is defined. # # the source file that defines iconv_ostream_create does so # only if HAVE_ICONV is defined; # # the aforementioned script pays *NO ATTENTION* to #ifdefs, # so it will include iconv_ostream_create in the list of # symbols to export regardless of whether a working iconv() # was found; # # the linker failing because it was told to export a symbol # that doesn't exist. # # This is a collection of multiple messes: # # 1) not all versions of iconv() defaulting to "return an error # if the target character set doesn't have a character that # corresponds to the source character" and not offering a way # to force that behavior; # # 2) either some parts of GNU gettext - and libraries bundled # with it, for some mysterious reason - depending on the GNU # behavior rather than assuming only what POSIX specifies, and # the configure script checking for the GNU behavior and not # setting HAVE_ICONV if it's not found; # # 3) the process for building the exported symbols file not # removing symbols that won't exist in the build due to # a "working" iconv() not being found; # # 4) the file that would define iconv_ostream_create() not # defining as an always-failing stub if HAVE_ICONV isn't # defined; # # 5) macOS's linker failing if a symbol is specified in an # exported symbols file but not found, while other linkers # just ignore it? (I add this because I'm a bit surprised # that this has not been fixed, as I suspect it would fail # on FreeBSD and possibly NetBSD as well, as I think their # iconv()s also default to transliterating rather than failing # if an input character has no corresponding character in # the output encoding.) # # The Homebrew folks are aware of this and have reported it to # Apple as a "feedback", for what that's worth: # # https://github.com/Homebrew/homebrew-core/commit/af3b4da5a096db3d9ee885e99ed29b33dec1f1c4 # # We adopt their fix, which is to run the configure script with # "am_cv_func_iconv_works=y" as one of the arguments if it's # running on Sonoma; in at least one test, doing so on Ventura # caused the build to fail. # if [[ $DARWIN_MAJOR_VERSION -ge 23 ]]; then workaround_arg="am_cv_func_iconv_works=y" else workaround_arg= fi CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure $workaround_arg || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gettext-$GETTEXT_VERSION-done fi } uninstall_gettext() { if [ ! -z "$installed_gettext_version" ] ; then # # GLib depends on this, so uninstall it. # uninstall_glib "$@" echo "Uninstalling GNU gettext:" cd gettext-$installed_gettext_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gettext-$installed_gettext_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gettext-$installed_gettext_version rm -rf gettext-$installed_gettext_version.tar.gz fi installed_gettext_version="" fi } install_pkg_config() { if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then echo "Downloading, building, and installing pkg-config:" [ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -L -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1 cd pkg-config-$PKG_CONFIG_VERSION ./configure --with-internal-glib || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch pkg-config-$PKG_CONFIG_VERSION-done fi } uninstall_pkg_config() { if [ ! -z "$installed_pkg_config_version" ] ; then echo "Uninstalling pkg-config:" cd pkg-config-$installed_pkg_config_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm pkg-config-$installed_pkg_config_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf pkg-config-$installed_pkg_config_version rm -rf pkg-config-$installed_pkg_config_version.tar.gz fi installed_pkg_config_version="" fi } install_glib() { if [ ! -f glib-$GLIB_VERSION-done ] ; then echo "Downloading, building, and installing GLib:" glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'` # # Starting with GLib 2.28.8, xz-compressed tarballs are available. # [ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O https://download.gnome.org/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1 cd glib-$GLIB_VERSION # # First, determine where the system include files are. # (It's not necessarily /usr/include.) There's a bit of a # greasy hack here; pre-5.x versions of the developer tools # don't support the --show-sdk-path option, and will produce # no output, so includedir will be set to /usr/include # (in those older versions of the developer tools, there is # a /usr/include directory). # # We need this for several things we do later. # includedir=`SDKROOT="$SDKPATH" xcrun --show-sdk-path 2>/dev/null`/usr/include # # GLib's configuration procedure, whether autotools-based or # Meson-based, really likes to use pkg-config to find libraries, # including libffi. # # At least some versions of macOS provide libffi, but, as macOS # doesn't provide pkg-config, they don't provide a .pc file for # it, so the autotools-based configuration needs some trickery # to get it to find the OS-supplied libffi, and the Meson-based # configuration simply won't find it at all. # # So, if we have a system-provided libffi, but pkg-config # doesn't find libffi, we construct a .pc file for that libffi, # and install it in /usr/local/lib/pkgconfig. # # First, check whether pkg-config finds libffi but thinks its # header files are in a non-existent directory. That probaby # means that we generated the .pc file when some SDK was the # appropriate choice, but Xcode has been updated since then # and that SDK is no longer present. If so, we remove it, # so that we will regenerate it if necessary, rather than # trying to build with a bogus include directory. (Yes, this # can happen, and has happened, causing mysterius build # failures when "#include " fails.) # if pkg-config libffi ; then # We have a .pc file for libffi; what does it say the # include directory is? incldir=`pkg-config --variable=includedir libffi` if [ ! -z "$incldir" -a ! -d "$incldir" ] ; then # Bogus - remove it, assuming $DO_RM /usr/local/lib/pkgconfig/libffi.pc fi fi if pkg-config libffi ; then # It found libffi; no need to install a .pc file, and we # don't want to overwrite what's there already. : elif [ ! -e $includedir/ffi/ffi.h ] ; then # We don't appear to have libffi as part of the system, so # let the configuration process figure out what to do. # # We test for the header file, not the library, because, in # Big Sur and later, there's no guarantee that, for a system # shared library, there's a corresponding dylib file in # /usr/lib. : else # # We have libffi, but pkg-config didn't find it; generate # and install the .pc file. # # # Now generate the .pc file. # # We generate the contents of the .pc file by using cat with # a here document containing a template for the file and # piping that to a sed command that replaces @INCLUDEDIR@ in # the template with the include directory we discovered # above, so that the .pc file gives the compiler flags # necessary to find the libffi headers (which are *not* # necessarily in /usr/include, as per the above). # # The EOF marker for the here document is in quotes, to tell # the shell not to do shell expansion, as .pc files use a # syntax to refer to .pc file variables that looks like the # syntax to refer to shell variables. # # The writing of the libffi.pc file is a greasy hack - the # process of generating the contents of the .pc file writes # to the standard output, but running the last process in # the pipeline as root won't allow the shell that's # *running* it to open the .pc file if we don't have write # permission on /usr/local/lib/pkgconfig, so we need a # program that creates a file and then reads from the # standard input and writes to that file. UN*Xes have a # program that does that; it's called "tee". :-) # # However, it *also* writes the file to the standard output, # so we redirect that to /dev/null when we run it. # cat <<"EOF" | sed "s;@INCLUDEDIR@;$includedir;" | $DO_TEE_TO_PC_FILE /usr/local/lib/pkgconfig/libffi.pc >/dev/null prefix=/usr libdir=${prefix}/lib includedir=@INCLUDEDIR@ Name: ffi Description: Library supporting Foreign Function Interfaces Version: 3.2.9999 Libs: -L${libdir} -lffi Cflags: -I${includedir}/ffi EOF fi # # GLib 2.59.1 and later use Meson+Ninja as the build system. # case $GLIB_MAJOR_VERSION in 1) echo "GLib $GLIB_VERSION" is too old 1>&2 ;; *) case $GLIB_MINOR_VERSION in [0-9]|1[0-9]|2[0-9]|3[0-7]) echo "GLib $GLIB_VERSION" is too old 1>&2 ;; 3[8-9]|4[0-9]|5[0-8]) if [ ! -f ./configure ]; then LIBTOOLIZE=glibtoolize ./autogen.sh fi # # At least with the version of Xcode that comes with # Leopard, /usr/include/ffi/fficonfig.h doesn't define # MACOSX, which causes the build of GLib to fail for at # least some versions of GLib. If we don't find # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, # explicitly define it. # # While we're at it, suppress -Wformat-nonliteral to # avoid a case where clang's stricter rules on when not # to complain about non-literal format arguments cause # it to complain about code that's safe but it wasn't # told that. See my comment #25 in GNOME bug 691608: # # https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25 # if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h then # It's defined, nothing to do CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 else CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 fi make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 ;; 59|[6-9][0-9]|[1-9][0-9][0-9]) # # 2.59.0 doesn't require Meson and Ninja, but it # supports it, and I'm too lazy to add a dot-dot # version check. # # Disable tests to work around # # https://gitlab.gnome.org/GNOME/glib/-/issues/2902 # CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MESON -Dtests=false _build || exit 1 ninja $MAKE_BUILD_OPTS -C _build || exit 1 $DO_NINJA_INSTALL || exit 1 ;; *) echo "Glib's put out 1000 2.x releases?" 1>&2 ;; esac esac cd .. touch glib-$GLIB_VERSION-done fi } uninstall_glib() { if [ ! -z "$installed_glib_version" ] ; then echo "Uninstalling GLib:" cd glib-$installed_glib_version installed_glib_major_version="`expr $installed_glib_version : '\([0-9][0-9]*\).*'`" installed_glib_minor_version="`expr $installed_glib_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" installed_glib_dotdot_version="`expr $installed_glib_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" installed_glib_major_minor_version=$installed_glib_major_version.$installed_glib_minor_version installed_glib_major_minor_dotdot_version=$installed_glib_major_version.$installed_glib_minor_version.$installed_glib_dotdot_version # # GLib 2.59.1 and later use Meson+Ninja as the build system. # case $installed_glib_major_version in 1) $DO_MAKE_UNINSTALL || exit 1 # # This appears to delete dependencies out from under other # Makefiles in the tree, causing it to fail. At least until # that gets fixed, if it ever gets fixed, we just ignore the # exit status of "make distclean" # # make distclean || exit 1 make distclean || echo "Ignoring make distclean failure" 1>&2 ;; *) case $installed_glib_minor_version in [0-9]|1[0-9]|2[0-9]|3[0-9]|4[0-9]|5[0-8]) $DO_MAKE_UNINSTALL || exit 1 # # This appears to delete dependencies out from under other # Makefiles in the tree, causing it to fail. At least until # that gets fixed, if it ever gets fixed, we just ignore the # exit status of "make distclean" # # make distclean || exit 1 make distclean || echo "Ignoring make distclean failure" 1>&2 ;; 59|[6-9][0-9]|[1-9][0-9][0-9]) # # 2.59.0 doesn't require Meson and Ninja, but it # supports it, and I'm too lazy to add a dot-dot # version check. # $DO_NINJA_UNINSTALL || exit 1 # # For Meson+Ninja, we do the build in an _build # subdirectory, so the equivalent of "make distclean" # is just to remove the directory tree. # rm -rf _build ;; *) echo "Glib's put out 1000 2.x releases?" 1>&2 ;; esac esac cd .. rm glib-$installed_glib_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf glib-$installed_glib_version rm -rf glib-$installed_glib_version.tar.xz fi installed_glib_version="" fi } install_qt() { if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then echo "Downloading and installing Qt:" # # What you get for this URL might just be a 302 Found reply, so use # -L so we get redirected. # # 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg # 5.2.0: qt-mac-opensource-{version}.dmg # 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg # 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg # 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg # 5.15 - 6.0: Offline installers no longer provided. # ( https://download.qt.io/archive/qt/5.15/5.15.0/OFFLINE_README.txt ) # XXX: We need a different approach for QT >= 5.15. One option would be to # install https://github.com/miurahr/aqtinstall, either permanently or into # a temporary venv. # case $QT_MAJOR_VERSION in 1|2|3|4) echo "Qt $QT_VERSION" is too old 1>&2 ;; 5) case $QT_MINOR_VERSION in 0|1|2|3|4|5|6|7|8) echo "Qt $QT_VERSION" is too old 1>&2 ;; 9|10|11|12|13|14) QT_VOLUME=qt-opensource-mac-x64-$QT_VERSION ;; *) echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2 ;; esac [ -f $QT_VOLUME.dmg ] || curl -L -O https://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION/$QT_MAJOR_MINOR_DOTDOT_VERSION/$QT_VOLUME.dmg || exit 1 $no_build && echo "Skipping installation" && return sudo hdiutil attach $QT_VOLUME.dmg || exit 1 # # Run the installer executable directly, so that we wait for # it to finish. Then unmount the volume. # /Volumes/$QT_VOLUME/$QT_VOLUME.app/Contents/MacOS/$QT_VOLUME sudo hdiutil detach /Volumes/$QT_VOLUME touch qt-$QT_VERSION-done ;; *) echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2 ;; esac fi } uninstall_qt() { if [ ! -z "$installed_qt_version" ] ; then echo "Uninstalling Qt:" rm -rf $HOME/Qt$installed_qt_version rm qt-$installed_qt_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded version. # # 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg # 5.2.0: qt-mac-opensource-{version}.dmg # 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg # 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg # 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg # installed_qt_major_version="`expr $installed_qt_version : '\([0-9][0-9]*\).*'`" installed_qt_minor_version="`expr $installed_qt_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" installed_qt_dotdot_version="`expr $installed_qt_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" case $installed_qt_major_version in 1|2|3|4) echo "Qt $installed_qt_version" is too old 1>&2 ;; 5*) case $installed_qt_minor_version in 0|1|2|3|4|5) echo "Qt $installed_qt_version" is too old 1>&2 ;; 6|7|8) installed_qt_volume=qt-opensource-mac-x64-clang-$installed_qt_version.dmg ;; 9|10|11|12|13|14) installed_qt_volume=qt-opensource-mac-x64-$installed_qt_version.dmg ;; esac esac rm -f $installed_qt_volume fi installed_qt_version="" fi } install_libsmi() { if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then echo "Downloading, building, and installing libsmi:" [ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1 cd libsmi-$LIBSMI_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libsmi-$LIBSMI_VERSION-done fi } uninstall_libsmi() { if [ ! -z "$installed_libsmi_version" ] ; then echo "Uninstalling libsmi:" cd libsmi-$installed_libsmi_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libsmi-$installed_libsmi_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libsmi-$installed_libsmi_version rm -rf libsmi-$installed_libsmi_version.tar.gz fi installed_libsmi_version="" fi } install_libgpg_error() { if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then echo "Downloading, building, and installing libgpg-error:" [ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1 cd libgpg-error-$LIBGPG_ERROR_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libgpg-error-$LIBGPG_ERROR_VERSION-done fi } uninstall_libgpg_error() { if [ ! -z "$installed_libgpg_error_version" ] ; then # # libgcrypt depends on this, so uninstall it. # uninstall_libgcrypt "$@" echo "Uninstalling libgpg-error:" cd libgpg-error-$installed_libgpg_error_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libgpg-error-$installed_libgpg_error_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libgpg-error-$installed_libgpg_error_version rm -rf libgpg-error-$installed_libgpg_error_version.tar.bz2 fi installed_libgpg_error_version="" fi } install_libgcrypt() { if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then # # libgpg-error is required for libgcrypt. # if [ -z $LIBGPG_ERROR_VERSION ] then echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2 exit 1 fi echo "Downloading, building, and installing libgcrypt:" [ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1 cd libgcrypt-$LIBGCRYPT_VERSION # # The assembler language code is not compatible with the macOS # x86 assembler (or is it an x86-64 vs. x86-32 issue?). # # libgcrypt expects gnu89, not c99/gnu99, semantics for # "inline". See, for example: # # https://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html # CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libgcrypt-$LIBGCRYPT_VERSION-done fi } uninstall_libgcrypt() { if [ ! -z "$installed_libgcrypt_version" ] ; then echo "Uninstalling libgcrypt:" cd libgcrypt-$installed_libgcrypt_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libgcrypt-$installed_libgcrypt_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libgcrypt-$installed_libgcrypt_version rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz fi installed_libgcrypt_version="" fi } install_gmp() { if [ "$GMP_VERSION" -a ! -f gmp-$GMP_VERSION-done ] ; then echo "Downloading, building, and installing GMP:" [ -f gmp-$GMP_VERSION.tar.lz ] || curl -L -O https://gmplib.org/download/gmp/gmp-$GMP_VERSION.tar.lz || exit 1 $no_build && echo "Skipping installation" && return lzip -c -d gmp-$GMP_VERSION.tar.lz | tar xf - || exit 1 cd gmp-$GMP_VERSION # # Create a fat binary: https://gmplib.org/manual/Notes-for-Package-Builds.html # # According to # # https://www.mail-archive.com/gmp-bugs@gmplib.org/msg01492.html # # and other pages, the Shiny New Linker in Xcode 15 causes this # build to fail with "ld: branch8 out of range 384833 in # ___gmpn_add_nc_x86_64"; linking with -ld64 is a workaround. # # For now, link with -ld64 on Xcode 15 and later. # XCODE_VERSION=`xcodebuild -version | sed -n 's;Xcode \(.*\);\1;p'` XCODE_MAJOR_VERSION="`expr $XCODE_VERSION : '\([0-9][0-9]*\).*'`" XCODE_MINOR_VERSION="`expr $XCODE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" XCODE_DOTDOT_VERSION="`expr $XCODE_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" if [ "$XCODE_MAJOR_VERSION" -ge 15 ] then LD64_FLAG="-ld64" else LD64_FLAG="" fi CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS $LD64_FLAG" ./configure --enable-fat || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gmp-$GMP_VERSION-done fi } uninstall_gmp() { if [ ! -z "$installed_gmp_version" ] ; then # # Nettle depends on this, so uninstall it. # uninstall_nettle "$@" echo "Uninstalling GMP:" cd gmp-$installed_gmp_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gmp-$installed_gmp_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gmp-$installed_gmp_version rm -rf gmp-$installed_gmp_version.tar.lz fi installed_gmp_version="" fi } install_libtasn1() { if [ "$LIBTASN1_VERSION" -a ! -f libtasn1-$LIBTASN1_VERSION-done ] ; then echo "Downloading, building, and installing libtasn1:" [ -f libtasn1-$LIBTASN1_VERSION.tar.gz ] || curl -L -O https://ftpmirror.gnu.org/libtasn1/libtasn1-$LIBTASN1_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libtasn1-$LIBTASN1_VERSION.tar.gz | tar xf - || exit 1 cd libtasn1-$LIBTASN1_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libtasn1-$LIBTASN1_VERSION-done fi } uninstall_libtasn1() { if [ ! -z "$installed_libtasn1_version" ] ; then # # p11-kit depends on this, so uninstall it. # uninstall_p11_kit "$@" echo "Uninstalling libtasn1:" cd libtasn1-$installed_libtasn1_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libtasn1-$installed_libtasn1_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libtasn1-$installed_libtasn1_version rm -rf libtasn1-$installed_libtasn1_version.tar.gz fi installed_libtasn1_version="" fi } install_p11_kit() { if [ "$P11KIT_VERSION" -a ! -f p11-kit-$P11KIT_VERSION-done ] ; then echo "Downloading, building, and installing p11-kit:" [ -f p11-kit-$P11KIT_VERSION.tar.xz ] || curl -L -O https://github.com/p11-glue/p11-kit/releases/download/$P11KIT_VERSION/p11-kit-$P11KIT_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat p11-kit-$P11KIT_VERSION.tar.xz | tar xf - || exit 1 cd p11-kit-$P11KIT_VERSION # # Prior to Catalina, the libffi that's supplied with macOS # doesn't support ffi_closure_alloc() or ffi_prep_closure_loc(), # both of which are required by p11-kit if built with libffi. # # According to # # https://p11-glue.github.io/p11-glue/p11-kit/manual/devel-building.html # # libffi is used "for sharing of PKCS#11 modules between # multiple callers in the same process. It is highly recommended # that this dependency be treated as a required dependency.", # but it's not clear that this matters to us, so we just # configure p11-kit not to use libffi. # CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -L/usr/local/lib" LIBS=-lintl ./configure --without-libffi --without-trust-paths || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch p11-kit-$P11KIT_VERSION-done fi } uninstall_p11_kit() { if [ ! -z "$installed_p11_kit_version" ] ; then # # Nettle depends on this, so uninstall it. # uninstall_nettle "$@" echo "Uninstalling p11-kit:" cd p11-kit-$installed_p11_kit_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm p11-kit-$installed_p11_kit_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf p11-kit-$installed_p11_kit_version rm -rf p11-kit-$installed_p11_kit_version.tar.xz fi installed_p11_kit_version="" fi } install_nettle() { if [ "$NETTLE_VERSION" -a ! -f nettle-$NETTLE_VERSION-done ] ; then echo "Downloading, building, and installing Nettle:" [ -f nettle-$NETTLE_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/gnu/nettle/nettle-$NETTLE_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat nettle-$NETTLE_VERSION.tar.gz | tar xf - || exit 1 cd nettle-$NETTLE_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I/usr/local/include" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -L/usr/local/lib" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch nettle-$NETTLE_VERSION-done fi } uninstall_nettle() { if [ ! -z "$installed_nettle_version" ] ; then # # GnuTLS depends on this, so uninstall it. # uninstall_gnutls "$@" echo "Uninstalling Nettle:" cd nettle-$installed_nettle_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm nettle-$installed_nettle_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf nettle-$installed_nettle_version rm -rf nettle-$installed_nettle_version.tar.gz fi installed_nettle_version="" fi } install_gnutls() { if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then # # GnuTLS requires Nettle. # if [ -z $NETTLE_VERSION ] then echo "GnuTLS requires Nettle, but you didn't install Nettle" 1>&2 exit 1 fi echo "Downloading, building, and installing GnuTLS:" if [[ $GNUTLS_MAJOR_VERSION -ge 3 ]] then # # Starting with GnuTLS 3.x, the tarballs are compressed with # xz rather than bzip2. # [ -f gnutls-$GNUTLS_VERSION.tar.xz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat gnutls-$GNUTLS_VERSION.tar.xz | tar xf - || exit 1 else [ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1 fi cd gnutls-$GNUTLS_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I /usr/local/include" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I/usr/local/include/" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -L/usr/local/lib" ./configure --with-included-unistring --disable-guile || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gnutls-$GNUTLS_VERSION-done fi } uninstall_gnutls() { if [ ! -z "$installed_gnutls_version" ] ; then echo "Uninstalling GnuTLS:" cd gnutls-$installed_gnutls_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gnutls-$installed_gnutls_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gnutls-$installed_gnutls_version rm -rf gnutls-$installed_gnutls_version.tar.bz2 fi installed_gnutls_version="" fi } install_lua() { if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then echo "Downloading, building, and installing Lua:" [ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O https://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1 cd lua-$LUA_VERSION make MYCFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" MYLDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MAKE_BUILD_OPTS macosx || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lua-$LUA_VERSION-done fi } uninstall_lua() { if [ ! -z "$installed_lua_version" ] ; then echo "Uninstalling Lua:" # # Lua has no "make uninstall", so just remove stuff manually. # There's no configure script, so there's no need for # "make distclean", either; just do "make clean". # (cd /usr/local/bin; $DO_RM -f lua luac) (cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp) (cd /usr/local/lib; $DO_RM -f liblua.a) (cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1) cd lua-$installed_lua_version make clean || exit 1 cd .. rm lua-$installed_lua_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf lua-$installed_lua_version rm -rf lua-$installed_lua_version.tar.gz fi installed_lua_version="" fi } install_snappy() { if [ "$SNAPPY_VERSION" -a ! -f snappy-$SNAPPY_VERSION-done ] ; then echo "Downloading, building, and installing snappy:" [ -f snappy-$SNAPPY_VERSION.tar.gz ] || curl -L -o snappy-$SNAPPY_VERSION.tar.gz https://github.com/google/snappy/archive/$SNAPPY_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat snappy-$SNAPPY_VERSION.tar.gz | tar xf - || exit 1 cd snappy-$SNAPPY_VERSION if [ "$SNAPPY_VERSION" = "1.1.10" ] ; then # This patch corresponds to https://github.com/google/snappy/commit/27f34a580be4a3becf5f8c0cba13433f53c21337 patch -p0 <${topdir}/macosx-support-lib-patches/snappy-signed.patch || exit 1 fi mkdir build_dir cd build_dir # # Build a shared library, because we'll be linking libwireshark, # which is a C library, with libsnappy, and libsnappy is a C++ # library and requires the C++ run time; the shared library # will carry that dependency with it, so linking with it should # Just Work. # MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE -DBUILD_SHARED_LIBS=YES -DSNAPPY_BUILD_BENCHMARKS=NO -DSNAPPY_BUILD_TESTS=NO ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch snappy-$SNAPPY_VERSION-done fi } uninstall_snappy() { if [ ! -z "$installed_snappy_version" ] ; then echo "Uninstalling snappy:" cd snappy-$installed_snappy_version # # snappy uses cmake and doesn't support "make uninstall"; # just remove what we know it installs. # # $DO_MAKE_UNINSTALL || exit 1 if [ -s build_dir/install_manifest.txt ] ; then while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat build_dir/install_manifest.txt; echo) else $DO_RM -f /usr/local/lib/libsnappy.1.1.8.dylib \ /usr/local/lib/libsnappy.1.dylib \ /usr/local/lib/libsnappy.dylib \ /usr/local/include/snappy-c.h \ /usr/local/include/snappy-sinksource.h \ /usr/local/include/snappy-stubs-public.h \ /usr/local/include/snappy.h \ /usr/local/lib/cmake/Snappy/SnappyConfig.cmake \ /usr/local/lib/cmake/Snappy/SnappyConfigVersion.cmake \ /usr/local/lib/cmake/Snappy/SnappyTargets-noconfig.cmake \ /usr/local/lib/cmake/Snappy/SnappyTargets.cmake || exit 1 fi # # snappy uses cmake and doesn't support "make distclean"; #.just remove the entire build directory. # # make distclean || exit 1 rm -rf build_dir || exit 1 cd .. rm snappy-$installed_snappy_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf snappy-$installed_snappy_version rm -rf snappy-$installed_snappy_version.tar.gz fi installed_snappy_version="" fi } install_zstd() { if [ "$ZSTD_VERSION" -a ! -f zstd-$ZSTD_VERSION-done ] ; then echo "Downloading, building, and installing zstd:" [ -f zstd-$ZSTD_VERSION.tar.gz ] || curl -L -O https://github.com/facebook/zstd/releases/download/v$ZSTD_VERSION/zstd-$ZSTD_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat zstd-$ZSTD_VERSION.tar.gz | tar xf - || exit 1 cd zstd-$ZSTD_VERSION make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch zstd-$ZSTD_VERSION-done fi } uninstall_zstd() { if [ ! -z "$installed_zstd_version" ] ; then echo "Uninstalling zstd:" cd zstd-$installed_zstd_version $DO_MAKE_UNINSTALL || exit 1 # # zstd has no configure script, so there's no need for # "make distclean", and the Makefile supplied with it # has no "make distclean" rule; just do "make clean". # make clean || exit 1 cd .. rm zstd-$installed_zstd_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf zstd-$installed_zstd_version rm -rf zstd-$installed_zstd_version.tar.gz fi installed_zstd_version="" fi } install_libxml2() { if [ "$LIBXML2_VERSION" -a ! -f libxml2-$LIBXML2_VERSION-done ] ; then echo "Downloading, building, and installing libxml2:" LIBXML2_MAJOR_VERSION="`expr $LIBXML2_VERSION : '\([0-9][0-9]*\).*'`" LIBXML2_MINOR_VERSION="`expr $LIBXML2_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" LIBXML2_MAJOR_MINOR_VERSION=$LIBXML2_MAJOR_VERSION.$LIBXML2_MINOR_VERSION [ -f libxml2-$LIBXML2_VERSION.tar.gz ] || curl -L -O https://download.gnome.org/sources/libxml2/$LIBXML2_MAJOR_MINOR_VERSION/libxml2-$LIBXML2_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat libxml2-$LIBXML2_VERSION.tar.xz | tar xf - || exit 1 cd libxml2-$LIBXML2_VERSION # # At least on macOS 12.0.1 with Xcode 13.1, when we build # libxml2, the linker complains that we don't have the right # to link with the Python framework, so don't build with # Python. # CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-python || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libxml2-$LIBXML2_VERSION-done fi } uninstall_libxml2() { if [ ! -z "$installed_libxml2_version" ] ; then echo "Uninstalling libxml2:" cd libxml2-$installed_libxml2_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libxml2-$installed_libxml2_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libxml2-$installed_libxml2_version rm -rf libxml2-$installed_libxml2_version.tar.xz fi installed_libxml2_version="" fi } install_lz4() { if [ "$LZ4_VERSION" -a ! -f lz4-$LZ4_VERSION-done ] ; then echo "Downloading, building, and installing lz4:" # # lz4 switched from sequentially numbered releases, named rN, # to vX.Y.Z-numbered releases. # # The old sequentially-numbered releases were in tarballs # at https://github.com/lz4/lz4/archive/rN.tar.gz, which # extract into an lz4-rN directory. # # THe new vX.Y.Z-numbered releases are in tarballs at # https://github.com/lz4/lz4/archive/vX.Y.Z.tar.gz, which # extract into an lz4-X.Y.Z directory - no, not lz4-vX.Y.Z, # just lz4-X.Y.Z. # # We expect LZ4_VERSION to be set to rN for the sequentially- # numbered releases and X.Y.Z - not vX.Y.Z - for the vX.Y.Z- # numbered releases. We also tell Curl to download the tarball # with a name that corresponds to the name of the target # directory, so that it begins with "lz4-" and ends with either # "rN" or "X.Y.Z", to match what almost all of the other # support libraries do. # if [[ "$LZ4_VERSION" == r* ]] then [ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/$LZ4_VERSION.tar.gz || exit 1 else [ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/v$LZ4_VERSION.tar.gz || exit 1 fi $no_build && echo "Skipping installation" && return gzcat lz4-$LZ4_VERSION.tar.gz | tar xf - || exit 1 cd lz4-$LZ4_VERSION # # No configure script here, but it appears that if MOREFLAGS is # set, that's added to CFLAGS, and those are combined with LDFLAGS # and CXXFLAGS into FLAGS, which is used when building source # files and libraries. # MOREFLAGS="-D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lz4-$LZ4_VERSION-done fi } uninstall_lz4() { if [ ! -z "$installed_lz4_version" ] ; then echo "Uninstalling lz4:" cd lz4-$installed_lz4_version $DO_MAKE_UNINSTALL || exit 1 # # lz4's Makefile doesn't support "make distclean"; just do # "make clean". Perhaps not using autotools means that # there's no need for "make distclean". # # make distclean || exit 1 make clean || exit 1 cd .. rm lz4-$installed_lz4_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # # "make install" apparently causes some stuff to be # modified in the build tree, so, as it's done as # root, that leaves stuff owned by root in the build # tree. Therefore, we have to remove the build tree # as root. # sudo rm -rf lz4-$installed_lz4_version rm -rf lz4-$installed_lz4_version.tar.gz fi installed_lz4_version="" fi } install_sbc() { if [ "$SBC_VERSION" -a ! -f sbc-$SBC_VERSION-done ] ; then echo "Downloading, building, and installing sbc:" [ -f sbc-$SBC_VERSION.tar.gz ] || curl -L -O https://www.kernel.org/pub/linux/bluetooth/sbc-$SBC_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat sbc-$SBC_VERSION.tar.gz | tar xf - || exit 1 cd sbc-$SBC_VERSION if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS -U__ARM_NEON__" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1 else CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1 fi make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch sbc-$SBC_VERSION-done fi } uninstall_sbc() { if [ ! -z "$installed_sbc_version" ] ; then echo "Uninstalling sbc:" cd sbc-$installed_sbc_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm sbc-$installed_sbc_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf sbc-$installed_sbc_version rm -rf sbc-$installed_sbc_version.tar.gz fi installed_sbc_version="" fi } install_maxminddb() { if [ "$MAXMINDDB_VERSION" -a ! -f maxminddb-$MAXMINDDB_VERSION-done ] ; then echo "Downloading, building, and installing MaxMindDB API:" [ -f libmaxminddb-$MAXMINDDB_VERSION.tar.gz ] || curl -L -O https://github.com/maxmind/libmaxminddb/releases/download/$MAXMINDDB_VERSION/libmaxminddb-$MAXMINDDB_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libmaxminddb-$MAXMINDDB_VERSION.tar.gz | tar xf - || exit 1 cd libmaxminddb-$MAXMINDDB_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch maxminddb-$MAXMINDDB_VERSION-done fi } uninstall_maxminddb() { if [ ! -z "$installed_maxminddb_version" ] ; then echo "Uninstalling MaxMindDB API:" cd libmaxminddb-$installed_maxminddb_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm maxminddb-$installed_maxminddb_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libmaxminddb-$installed_maxminddb_version rm -rf libmaxminddb-$installed_maxminddb_version.tar.gz fi installed_maxminddb_version="" fi } install_c_ares() { if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then echo "Downloading, building, and installing C-Ares API:" [ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O https://c-ares.org/download/c-ares-$CARES_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1 cd c-ares-$CARES_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch c-ares-$CARES_VERSION-done fi } uninstall_c_ares() { if [ ! -z "$installed_cares_version" ] ; then echo "Uninstalling C-Ares API:" cd c-ares-$installed_cares_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm c-ares-$installed_cares_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf c-ares-$installed_cares_version rm -rf c-ares-$installed_cares_version.tar.gz fi installed_cares_version="" fi } install_libssh() { if [ "$LIBSSH_VERSION" -a ! -f libssh-$LIBSSH_VERSION-done ] ; then echo "Downloading, building, and installing libssh:" LIBSSH_MAJOR_VERSION="`expr $LIBSSH_VERSION : '\([0-9][0-9]*\).*'`" LIBSSH_MINOR_VERSION="`expr $LIBSSH_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" LIBSSH_MAJOR_MINOR_VERSION=$LIBSSH_MAJOR_VERSION.$LIBSSH_MINOR_VERSION [ -f libssh-$LIBSSH_VERSION.tar.xz ] || curl -L -O https://www.libssh.org/files/$LIBSSH_MAJOR_MINOR_VERSION/libssh-$LIBSSH_VERSION.tar.xz $no_build && echo "Skipping installation" && return xzcat libssh-$LIBSSH_VERSION.tar.xz | tar xf - || exit 1 cd libssh-$LIBSSH_VERSION mkdir build cd build MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE -DWITH_GCRYPT=1 ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch libssh-$LIBSSH_VERSION-done fi } uninstall_libssh() { if [ ! -z "$installed_libssh_version" ] ; then echo "Uninstalling libssh:" cd libssh-$installed_libssh_version # # libssh uses cmake and doesn't support "make uninstall"; # just remove what we know it installs. # # $DO_MAKE_UNINSTALL || exit 1 $DO_RM -rf /usr/local/lib/libssh* \ /usr/local/include/libssh \ /usr/local/lib/pkgconfig/libssh* \ /usr/local/lib/cmake/libssh || exit 1 # # libssh uses cmake and doesn't support "make distclean"; # just remove the entire build directory. # # make distclean || exit 1 rm -rf build || exit 1 cd .. rm libssh-$installed_libssh_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libssh-$installed_libssh_version rm -rf libssh-$installed_libssh_version.tar.gz fi installed_libssh_version="" fi } install_nghttp2() { if [ "$NGHTTP2_VERSION" -a ! -f nghttp2-$NGHTTP2_VERSION-done ] ; then echo "Downloading, building, and installing nghttp2:" [ -f nghttp2-$NGHTTP2_VERSION.tar.xz ] || curl -L -O https://github.com/nghttp2/nghttp2/releases/download/v$NGHTTP2_VERSION/nghttp2-$NGHTTP2_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat nghttp2-$NGHTTP2_VERSION.tar.xz | tar xf - || exit 1 cd nghttp2-$NGHTTP2_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch nghttp2-$NGHTTP2_VERSION-done fi } uninstall_nghttp2() { if [ ! -z "$installed_nghttp2_version" ] ; then echo "Uninstalling nghttp2:" cd nghttp2-$installed_nghttp2_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm nghttp2-$installed_nghttp2_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf nghttp2-$installed_nghttp2_version rm -rf nghttp2-$installed_nghttp2_version.tar.xz fi installed_nghttp2_version="" fi } install_nghttp3() { if [ "$NGHTTP3_VERSION" -a ! -f nghttp3-$NGHTTP3_VERSION-done ] ; then echo "Downloading, building, and installing nghttp3:" [ -f nghttp3-$NGHTTP3_VERSION.tar.xz ] || curl -L -O https://github.com/ngtcp2/nghttp3/releases/download/v$NGHTTP3_VERSION/nghttp3-$NGHTTP3_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat nghttp3-$NGHTTP3_VERSION.tar.xz | tar xf - || exit 1 cd nghttp3-$NGHTTP3_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch nghttp3-$NGHTTP3_VERSION-done fi } uninstall_nghttp3() { if [ ! -z "$installed_nghttp3_version" ] ; then echo "Uninstalling nghttp3:" cd nghttp3-$installed_nghttp3_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm nghttp3-$installed_nghttp3_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf nghttp3-$installed_nghttp3_version rm -rf nghttp3-$installed_nghttp3_version.tar.xz fi installed_nghttp3_version="" fi } install_libtiff() { if [ "$LIBTIFF_VERSION" -a ! -f tiff-$LIBTIFF_VERSION-done ] ; then echo "Downloading, building, and installing libtiff:" [ -f tiff-$LIBTIFF_VERSION.tar.gz ] || curl --fail -L -O https://download.osgeo.org/libtiff/tiff-$LIBTIFF_VERSION.tar.gz || curl --fail -L -O https://download.osgeo.org/libtiff/old/tiff-$LIBTIFF_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat tiff-$LIBTIFF_VERSION.tar.gz | tar xf - || exit 1 cd tiff-$LIBTIFF_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch tiff-$LIBTIFF_VERSION-done fi } uninstall_libtiff() { if [ ! -z "$installed_libtiff_version" ] ; then echo "Uninstalling libtiff:" cd tiff-$installed_libtiff_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm tiff-$installed_libtiff_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf tiff-$installed_libtiff_version rm -rf tiff-$installed_libtiff_version.tar.gz fi installed_libtiff_version="" fi } install_spandsp() { if [ "$SPANDSP_VERSION" -a ! -f spandsp-$SPANDSP_VERSION-done ] ; then echo "Downloading, building, and installing SpanDSP:" [ -f spandsp-$SPANDSP_VERSION.tar.gz ] || curl -L -O https://www.soft-switch.org/downloads/spandsp/spandsp-$SPANDSP_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat spandsp-$SPANDSP_VERSION.tar.gz | tar xf - || exit 1 cd spandsp-$SPANDSP_VERSION # # Don't use -Wunused-but-set-variable, as it's not supported # by all the gcc versions in the versions of Xcode that we # support. # patch -p0 <${topdir}/macosx-support-lib-patches/spandsp-configure-patch || exit 1 CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch spandsp-$SPANDSP_VERSION-done fi } uninstall_spandsp() { if [ ! -z "$installed_spandsp_version" ] ; then echo "Uninstalling SpanDSP:" cd spandsp-$installed_spandsp_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm spandsp-$installed_spandsp_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf spandsp-$installed_spandsp_version rm -rf spandsp-$installed_spandsp_version.tar.gz fi installed_spandsp_version="" fi } install_speexdsp() { if [ "$SPEEXDSP_VERSION" -a ! -f speexdsp-$SPEEXDSP_VERSION-done ] ; then echo "Downloading, building, and installing SpeexDSP:" [ -f speexdsp-$SPEEXDSP_VERSION.tar.gz ] || curl -L -O https://ftp.osuosl.org/pub/xiph/releases/speex/speexdsp-$SPEEXDSP_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat speexdsp-$SPEEXDSP_VERSION.tar.gz | tar xf - || exit 1 cd speexdsp-$SPEEXDSP_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch speexdsp-$SPEEXDSP_VERSION-done fi } uninstall_speexdsp() { if [ ! -z "$installed_speexdsp_version" ] ; then echo "Uninstalling SpeexDSP:" cd speexdsp-$installed_speexdsp_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm speexdsp-$installed_speexdsp_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf speexdsp-$installed_speexdsp_version rm -rf speexdsp-$installed_speexdsp_version.tar.gz fi installed_speexdsp_version="" fi } install_bcg729() { if [ "$BCG729_VERSION" -a ! -f bcg729-$BCG729_VERSION-done ] ; then echo "Downloading, building, and installing bcg729:" [ -f bcg729-$BCG729_VERSION.tar.gz ] || curl -L -O https://gitlab.linphone.org/BC/public/bcg729/-/archive/$BCG729_VERSION/bcg729-$BCG729_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat bcg729-$BCG729_VERSION.tar.gz | tar xf - || exit 1 cd bcg729-$BCG729_VERSION mkdir build_dir cd build_dir MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch bcg729-$BCG729_VERSION-done fi } uninstall_bcg729() { if [ ! -z "$installed_bcg729_version" ] ; then echo "Uninstalling bcg729:" cd bcg729-$installed_bcg729_version # # bcg729 uses cmake on macOS and doesn't support "make uninstall"; # just remove what we know it installs. # # $DO_MAKE_UNINSTALL || exit 1 $DO_RM -rf /usr/local/share/Bcg729 \ /usr/local/lib/libbcg729* \ /usr/local/include/bcg729 \ /usr/local/lib/pkgconfig/libbcg729* || exit 1 # # bcg729 uses cmake on macOS and doesn't support "make distclean"; # just remove the enire build directory. # # make distclean || exit 1 rm -rf build_dir || exit 1 cd .. rm bcg729-$installed_bcg729_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf bcg729-$installed_bcg729_version rm -rf bcg729-$installed_bcg729_version.tar.gz fi installed_bcg729_version="" fi } install_ilbc() { if [ -n "$ILBC_VERSION" ] && [ ! -f ilbc-$ILBC_VERSION-done ] ; then echo "Downloading, building, and installing iLBC:" [ -f libilbc-$ILBC_VERSION.tar.bz ] || curl --location --remote-name https://github.com/TimothyGu/libilbc/releases/download/v$ILBC_VERSION/libilbc-$ILBC_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat libilbc-$ILBC_VERSION.tar.bz2 | tar xf - || exit 1 cd libilbc-$ILBC_VERSION || exit 1 CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch ilbc-$ILBC_VERSION-done fi } uninstall_ilbc() { if [ -n "$installed_ilbc_version" ] ; then echo "Uninstalling iLBC:" cd "libilbc-$installed_ilbc_version" || exit 1 $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm "ilbc-$installed_ilbc_version-done" if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf "libilbc-$installed_ilbc_version" rm -rf "libilbc-$installed_ilbc_version.tar.bz2" fi installed_ilbc_version="" fi } install_opus() { if [ "$OPUS_VERSION" -a ! -f opus-$OPUS_VERSION-done ] ; then echo "Downloading, building, and installing opus:" [ -f opus-$OPUS_VERSION.tar.gz ] || curl -L -O https://downloads.xiph.org/releases/opus/opus-$OPUS_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat opus-$OPUS_VERSION.tar.gz | tar xf - || exit 1 cd opus-$OPUS_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch opus-$OPUS_VERSION-done fi } uninstall_opus() { if [ ! -z "$installed_opus_version" ] ; then echo "Uninstalling opus:" cd opus-$installed_opus_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm opus-$installed_opus_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf opus-$installed_opus_version rm -rf opus-$installed_opus_version.tar.gz fi installed_opus_version="" fi } install_python3() { # The macos11 installer can be deployed to older versions, down to # 10.9 (Mavericks), but is still considered experimental so continue # to use the 64-bit installer (10.9) on earlier releases for now. local macver=x10.9 if [[ $DARWIN_MAJOR_VERSION -gt 19 ]]; then # The macos11 installer is required for Arm-based Macs, which require # macOS 11 Big Sur. Note that the package name is "11.0" (no x) for # 3.9.1 but simply "11" for 3.9.2 (and later) if [[ $PYTHON3_VERSION = 3.9.1 ]]; then macver=11.0 else macver=11 fi fi if [ "$PYTHON3_VERSION" -a ! -f python3-$PYTHON3_VERSION-done ] ; then echo "Downloading and installing python3:" [ -f python-$PYTHON3_VERSION-macos$macver.pkg ] || curl -L -O https://www.python.org/ftp/python/$PYTHON3_VERSION/python-$PYTHON3_VERSION-macos$macver.pkg || exit 1 $no_build && echo "Skipping installation" && return sudo installer -target / -pkg python-$PYTHON3_VERSION-macos$macver.pkg || exit 1 touch python3-$PYTHON3_VERSION-done # # On macOS, the pip3 installed from Python packages appears to # install scripts /Library/Frameworks/Python.framework/Versions/M.N/bin, # where M.N is the major and minor version of Python (the dot-dot # release is irrelevant). # # Strip off any dot-dot component in $PYTHON3_VERSION. # python_version=`echo $PYTHON3_VERSION | sed 's/\([1-9][0-9]*\.[1-9][0-9]*\).*/\1/'` # # Now treat Meson as being in the directory in question. # MESON="/Library/Frameworks/Python.framework/Versions/$python_version/bin/meson" else # # We're using the Python 3 that's in /usr/bin, the pip3 for # which installs scripts in /usr/local/bin, so, when we # install Meson, look for it there. # MESON=/usr/local/bin/meson fi } uninstall_python3() { # Major version (e.g. "3.7") local PYTHON_VERSION=${installed_python3_version%.*} if [ ! -z "$installed_python3_version" ] ; then echo "Uninstalling python3:" frameworkdir="/Library/Frameworks/Python.framework/Versions/$PYTHON_VERSION" sudo rm -rf "$frameworkdir" sudo rm -rf "/Applications/Python $PYTHON_VERSION" sudo find /usr/local/bin -maxdepth 1 -lname "*$frameworkdir/bin/*" -delete # Remove three symlinks and empty directories. Removing directories # might fail if for some reason multiple versions are installed. sudo rm /Library/Frameworks/Python.framework/Headers sudo rm /Library/Frameworks/Python.framework/Python sudo rm /Library/Frameworks/Python.framework/Resources sudo rmdir /Library/Frameworks/Python.framework/Versions sudo rmdir /Library/Frameworks/Python.framework sudo pkgutil --forget org.python.Python.PythonApplications-$PYTHON_VERSION sudo pkgutil --forget org.python.Python.PythonDocumentation-$PYTHON_VERSION sudo pkgutil --forget org.python.Python.PythonFramework-$PYTHON_VERSION sudo pkgutil --forget org.python.Python.PythonUnixTools-$PYTHON_VERSION rm python3-$installed_python3_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -f python-$installed_python3_version-macos11.pkg rm -f python-$installed_python3_version-macos11.0.pkg rm -f python-$installed_python3_version-macosx10.9.pkg rm -f python-$installed_python3_version-macosx10.6.pkg fi installed_python3_version="" fi } install_brotli() { if [ "$BROTLI_VERSION" -a ! -f brotli-$BROTLI_VERSION-done ] ; then echo "Downloading, building, and installing brotli:" [ -f brotli-$BROTLI_VERSION.tar.gz ] || curl -L -o brotli-$BROTLI_VERSION.tar.gz https://github.com/google/brotli/archive/v$BROTLI_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat brotli-$BROTLI_VERSION.tar.gz | tar xf - || exit 1 cd brotli-$BROTLI_VERSION mkdir build_dir cd build_dir MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" $DO_CMAKE ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch brotli-$BROTLI_VERSION-done fi } uninstall_brotli() { if [ ! -z "$installed_brotli_version" ] ; then echo "Uninstalling brotli:" cd brotli-$installed_brotli_version # # brotli uses cmake on macOS and doesn't support "make uninstall"; # just remove what we know it installs. # # $DO_MAKE_UNINSTALL || exit 1 $DO_RM -rf /usr/local/bin/brotli \ /usr/local/lib/libbrotli* \ /usr/local/include/brotli \ /usr/local/lib/pkgconfig/libbrotli* || exit 1 # # brotli uses cmake on macOS and doesn't support "make distclean"; # just remove the enire build directory. # # make distclean || exit 1 rm -rf build_dir || exit 1 cd .. rm brotli-$installed_brotli_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf brotli-$installed_brotli_version rm -rf brotli-$installed_brotli_version.tar.gz fi installed_brotli_version="" fi } install_minizip() { if [ "$ZLIB_VERSION" ] && [ ! -f minizip-$ZLIB_VERSION-done ] ; then echo "Downloading, building, and installing zlib for minizip:" [ -f zlib-$ZLIB_VERSION.tar.gz ] || curl -L -o zlib-$ZLIB_VERSION.tar.gz https://zlib.net/zlib-$ZLIB_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat zlib-$ZLIB_VERSION.tar.gz | tar xf - || exit 1 # # minizip ships both with a minimal Makefile that doesn't # support "make install", "make uninstall", or "make distclean", # and with a Makefile.am file that, if we do an autoreconf, # gives us a configure script, and a Makefile.in that, if we run # the configure script, gives us a Makefile that supports ll of # those targets, and that installs a pkg-config .pc file for # minizip. # # So that's what we do. # cd zlib-$ZLIB_VERSION/contrib/minizip || exit 1 LIBTOOLIZE=glibtoolize autoreconf --force --install CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../../.. touch minizip-$ZLIB_VERSION-done fi } uninstall_minizip() { if [ -n "$installed_minizip_version" ] ; then echo "Uninstalling minizip:" cd zlib-$installed_minizip_version/contrib/minizip $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd ../../.. rm minizip-$installed_minizip_version-done if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf zlib-$installed_minizip_version rm -rf zlib-$installed_minizip_version.tar.gz fi installed_minizip_version="" fi } install_sparkle() { if [ "$SPARKLE_VERSION" ] && [ ! -f sparkle-$SPARKLE_VERSION-done ] ; then echo "Downloading and installing Sparkle:" # # Download the tarball and unpack it in /usr/local/Sparkle-x.y.z # [ -f Sparkle-$SPARKLE_VERSION.tar.xz ] || curl -L -o Sparkle-$SPARKLE_VERSION.tar.xz https://github.com/sparkle-project/Sparkle/releases/download/$SPARKLE_VERSION/Sparkle-$SPARKLE_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return test -d "/usr/local/Sparkle-$SPARKLE_VERSION" || sudo mkdir "/usr/local/Sparkle-$SPARKLE_VERSION" sudo tar -C "/usr/local/Sparkle-$SPARKLE_VERSION" -xpof Sparkle-$SPARKLE_VERSION.tar.xz touch sparkle-$SPARKLE_VERSION-done fi } uninstall_sparkle() { if [ -n "$installed_sparkle_version" ]; then echo "Uninstalling Sparkle:" sudo rm -rf "/usr/local/Sparkle-$installed_sparkle_version" if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then rm -f "Sparkle-$installed_sparkle_version.tar.xz" fi installed_sparkle_version="" fi } install_all() { # # Check whether the versions we have installed are the versions # requested; if not, uninstall the installed versions. # if [ ! -z "$installed_brotli_version" -a \ "$installed_brotli_version" != "$BROTLI_VERSION" ] ; then echo "Installed brotli version is $installed_brotli_version" if [ -z "$BROTLI_VERSION" ] ; then echo "brotli is not requested" else echo "Requested brotli version is $BROTLI_VERSION" fi uninstall_brotli -r fi if [ ! -z "$installed_python3_version" -a \ "$installed_python3_version" != "$PYTHON3_VERSION" ] ; then echo "Installed python3 version is $installed_python3_version" if [ -z "$PYTHON3_VERSION" ] ; then echo "python3 is not requested" else echo "Requested python3 version is $PYTHON3_VERSION" fi uninstall_python3 -r fi if [ ! -z "$installed_bcg729_version" -a \ "$installed_bcg729_version" != "$BCG729_VERSION" ] ; then echo "Installed bcg729 version is $installed_bcg729_version" if [ -z "$BCG729_VERSION" ] ; then echo "bcg729 is not requested" else echo "Requested bcg729 version is $BCG729_VERSION" fi uninstall_bcg729 -r fi if [ -n "$installed_ilbc_version" ] \ && [ "$installed_ilbc_version" != "$ILBC_VERSION" ] ; then echo "Installed iLBC version is $installed_ilbc_version" if [ -z "$ILBC_VERSION" ] ; then echo "iLBC is not requested" else echo "Requested iLBC version is $ILBC_VERSION" fi uninstall_ilbc -r fi if [ -n "$installed_opus_version" ] \ && [ "$installed_opus_version" != "$OPUS_VERSION" ] ; then echo "Installed opus version is $installed_opus_version" if [ -z "$OPUS_VERSION" ] ; then echo "opus is not requested" else echo "Requested opus version is $OPUS_VERSION" fi uninstall_opus -r fi if [ ! -z "$installed_spandsp_version" -a \ "$installed_spandsp_version" != "$SPANDSP_VERSION" ] ; then echo "Installed SpanDSP version is $installed_spandsp_version" if [ -z "$SPANDSP_VERSION" ] ; then echo "spandsp is not requested" else echo "Requested SpanDSP version is $SPANDSP_VERSION" fi uninstall_spandsp -r fi if [ ! -z "$installed_speexdsp_version" -a \ "$installed_speexdsp_version" != "$SPEEXDSP_VERSION" ] ; then echo "Installed SpeexDSP version is $installed_speexdsp_version" if [ -z "$SPEEXDSP_VERSION" ] ; then echo "speexdsp is not requested" else echo "Requested SpeexDSP version is $SPEEXDSP_VERSION" fi uninstall_speexdsp -r fi if [ ! -z "$installed_libtiff_version" -a \ "$installed_libtiff_version" != "$LIBTIFF_VERSION" ] ; then echo "Installed libtiff version is $installed_libtiff_version" if [ -z "$LIBTIFF_VERSION" ] ; then echo "libtiff is not requested" else echo "Requested libtiff version is $LIBTIFF_VERSION" fi uninstall_libtiff -r fi if [ ! -z "$installed_nghttp2_version" -a \ "$installed_nghttp2_version" != "$NGHTTP2_VERSION" ] ; then echo "Installed nghttp2 version is $installed_nghttp2_version" if [ -z "$NGHTTP2_VERSION" ] ; then echo "nghttp2 is not requested" else echo "Requested nghttp2 version is $NGHTTP2_VERSION" fi uninstall_nghttp2 -r fi if [ ! -z "$installed_nghttp3_version" -a \ "$installed_nghttp3_version" != "$NGHTTP3_VERSION" ] ; then echo "Installed nghttp3 version is $installed_nghttp3_version" if [ -z "$NGHTTP3_VERSION" ] ; then echo "nghttp3 is not requested" else echo "Requested nghttp3 version is $NGHTTP3_VERSION" fi uninstall_nghttp3 -r fi if [ ! -z "$installed_libssh_version" -a \ "$installed_libssh_version" != "$LIBSSH_VERSION" ] ; then echo "Installed libssh version is $installed_libssh_version" if [ -z "$LIBSSH_VERSION" ] ; then echo "libssh is not requested" else echo "Requested libssh version is $LIBSSH_VERSION" fi uninstall_libssh -r fi if [ ! -z "$installed_cares_version" -a \ "$installed_cares_version" != "$CARES_VERSION" ] ; then echo "Installed C-Ares version is $installed_cares_version" if [ -z "$CARES_VERSION" ] ; then echo "C-Ares is not requested" else echo "Requested C-Ares version is $CARES_VERSION" fi uninstall_c_ares -r fi if [ ! -z "$installed_maxminddb_version" -a \ "$installed_maxminddb_version" != "$MAXMINDDB_VERSION" ] ; then echo "Installed MaxMindDB API version is $installed_maxminddb_version" if [ -z "$MAXMINDDB_VERSION" ] ; then echo "MaxMindDB is not requested" else echo "Requested MaxMindDB version is $MAXMINDDB_VERSION" fi uninstall_maxminddb -r fi if [ ! -z "$installed_sbc_version" -a \ "$installed_sbc_version" != "$SBC_VERSION" ] ; then echo "Installed SBC version is $installed_sbc_version" if [ -z "$SBC_VERSION" ] ; then echo "SBC is not requested" else echo "Requested SBC version is $SBC_VERSION" fi uninstall_sbc -r fi if [ ! -z "$installed_lz4_version" -a \ "$installed_lz4_version" != "$LZ4_VERSION" ] ; then echo "Installed LZ4 version is $installed_lz4_version" if [ -z "$LZ4_VERSION" ] ; then echo "LZ4 is not requested" else echo "Requested LZ4 version is $LZ4_VERSION" fi uninstall_lz4 -r fi if [ ! -z "$installed_libxml2_version" -a \ "$installed_libxml2_version" != "$LIBXML2_VERSION" ] ; then echo "Installed libxml2 version is $installed_libxml2_version" if [ -z "$LIBXML2_VERSION" ] ; then echo "libxml2 is not requested" else echo "Requested libxml2 version is $LIBXML2_VERSION" fi uninstall_libxml2 -r fi if [ ! -z "$installed_snappy_version" -a \ "$installed_snappy_version" != "$SNAPPY_VERSION" ] ; then echo "Installed SNAPPY version is $installed_snappy_version" if [ -z "$SNAPPY_VERSION" ] ; then echo "SNAPPY is not requested" else echo "Requested SNAPPY version is $SNAPPY_VERSION" fi uninstall_snappy -r fi if [ ! -z "$installed_lua_version" -a \ "$installed_lua_version" != "$LUA_VERSION" ] ; then echo "Installed Lua version is $installed_lua_version" if [ -z "$LUA_VERSION" ] ; then echo "Lua is not requested" else echo "Requested Lua version is $LUA_VERSION" fi uninstall_lua -r fi if [ ! -z "$installed_gnutls_version" -a \ "$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then echo "Installed GnuTLS version is $installed_gnutls_version" if [ -z "$GNUTLS_VERSION" ] ; then echo "GnuTLS is not requested" else echo "Requested GnuTLS version is $GNUTLS_VERSION" fi uninstall_gnutls -r fi if [ ! -z "$installed_nettle_version" -a \ "$installed_nettle_version" != "$NETTLE_VERSION" ] ; then echo "Installed Nettle version is $installed_nettle_version" if [ -z "$NETTLE_VERSION" ] ; then echo "Nettle is not requested" else echo "Requested Nettle version is $NETTLE_VERSION" fi uninstall_nettle -r fi if [ ! -z "$installed_gmp_version" -a \ "$installed_gmp_version" != "$GMP_VERSION" ] ; then echo "Installed GMP version is $installed_gmp_version" if [ -z "$GMP_VERSION" ] ; then echo "GMP is not requested" else echo "Requested GMP version is $GMP_VERSION" fi uninstall_gmp -r fi if [ ! -z "$installed_p11_kit_version" -a \ "$installed_p11_kit_version" != "$P11KIT_VERSION" ] ; then echo "Installed p11-kit version is $installed_p11_kit_version" if [ -z "$P11KIT_VERSION" ] ; then echo "p11-kit is not requested" else echo "Requested p11-kit version is $P11KIT_VERSION" fi uninstall_p11_kit -r fi if [ ! -z "$installed_libtasn1_version" -a \ "$installed_libtasn1_version" != "$LIBTASN1_VERSION" ] ; then echo "Installed libtasn1 version is $installed_libtasn1_version" if [ -z "$LIBTASN1_VERSION" ] ; then echo "libtasn1 is not requested" else echo "Requested libtasn1 version is $LIBTASN1_VERSION" fi uninstall_libtasn1 -r fi if [ ! -z "$installed_libgcrypt_version" -a \ "$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then echo "Installed libgcrypt version is $installed_libgcrypt_version" if [ -z "$LIBGCRYPT_VERSION" ] ; then echo "libgcrypt is not requested" else echo "Requested libgcrypt version is $LIBGCRYPT_VERSION" fi uninstall_libgcrypt -r fi if [ ! -z "$installed_libgpg_error_version" -a \ "$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then echo "Installed libgpg-error version is $installed_libgpg_error_version" if [ -z "$LIBGPG_ERROR_VERSION" ] ; then echo "libgpg-error is not requested" else echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION" fi uninstall_libgpg_error -r fi if [ ! -z "$installed_libsmi_version" -a \ "$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then echo "Installed libsmi version is $installed_libsmi_version" if [ -z "$LIBSMI_VERSION" ] ; then echo "libsmi is not requested" else echo "Requested libsmi version is $LIBSMI_VERSION" fi uninstall_libsmi -r fi if [ ! -z "$installed_qt_version" -a \ "$installed_qt_version" != "$QT_VERSION" ] ; then echo "Installed Qt version is $installed_qt_version" if [ -z "$QT_VERSION" ] ; then echo "Qt is not requested" else echo "Requested Qt version is $QT_VERSION" fi uninstall_qt -r fi if [ ! -z "$installed_glib_version" -a \ "$installed_glib_version" != "$GLIB_VERSION" ] ; then echo "Installed GLib version is $installed_glib_version" if [ -z "$GLIB_VERSION" ] ; then echo "GLib is not requested" else echo "Requested GLib version is $GLIB_VERSION" fi uninstall_glib -r fi if [ ! -z "$installed_pkg_config_version" -a \ "$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then echo "Installed pkg-config version is $installed_pkg_config_version" if [ -z "$PKG_CONFIG_VERSION" ] ; then echo "pkg-config is not requested" else echo "Requested pkg-config version is $PKG_CONFIG_VERSION" fi uninstall_pkg_config -r fi if [ ! -z "$installed_gettext_version" -a \ "$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then echo "Installed GNU gettext version is $installed_gettext_version" if [ -z "$GETTEXT_VERSION" ] ; then echo "GNU gettext is not requested" else echo "Requested GNU gettext version is $GETTEXT_VERSION" fi uninstall_gettext -r fi if [ ! -z "$installed_ninja_version" -a \ "$installed_ninja_version" != "$NINJA_VERSION" ] ; then echo "Installed Ninja version is $installed_ninja_version" if [ -z "$NINJA_VERSION" ] ; then echo "Ninja is not requested" else echo "Requested Ninja version is $NINJA_VERSION" fi uninstall_ninja -r fi if [ ! -z "$installed_asciidoctorpdf_version" -a \ "$installed_asciidoctorpdf_version" != "$ASCIIDOCTORPDF_VERSION" ] ; then echo "Installed Asciidoctor-pdf version is $installed_asciidoctorpdf_version" if [ -z "$ASCIIDOCTORPDF_VERSION" ] ; then echo "Asciidoctor-pdf is not requested" else echo "Requested Asciidoctor-pdf version is $ASCIIDOCTORPDF_VERSION" fi # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_asciidoctorpdf -r fi if [ ! -z "$installed_asciidoctor_version" -a \ "$installed_asciidoctor_version" != "$ASCIIDOCTOR_VERSION" ] ; then echo "Installed Asciidoctor version is $installed_asciidoctor_version" if [ -z "$ASCIIDOCTOR_VERSION" ] ; then echo "Asciidoctor is not requested" else echo "Requested Asciidoctor version is $ASCIIDOCTOR_VERSION" fi # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_asciidoctor -r fi if [ ! -z "$installed_cmake_version" -a \ "$installed_cmake_version" != "$CMAKE_VERSION" ] ; then echo "Installed CMake version is $installed_cmake_version" if [ -z "$CMAKE_VERSION" ] ; then echo "CMake is not requested" else echo "Requested CMake version is $CMAKE_VERSION" fi uninstall_cmake -r fi if [ ! -z "$installed_libtool_version" -a \ "$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then echo "Installed GNU libtool version is $installed_libtool_version" if [ -z "$LIBTOOL_VERSION" ] ; then echo "GNU libtool is not requested" else echo "Requested GNU libtool version is $LIBTOOL_VERSION" fi uninstall_libtool -r fi if [ ! -z "$installed_automake_version" -a \ "$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then echo "Installed GNU automake version is $installed_automake_version" if [ -z "$AUTOMAKE_VERSION" ] ; then echo "GNU automake is not requested" else echo "Requested GNU automake version is $AUTOMAKE_VERSION" fi uninstall_automake -r fi if [ ! -z "$installed_autoconf_version" -a \ "$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then echo "Installed GNU autoconf version is $installed_autoconf_version" if [ -z "$AUTOCONF_VERSION" ] ; then echo "GNU autoconf is not requested" else echo "Requested GNU autoconf version is $AUTOCONF_VERSION" fi uninstall_autoconf -r fi if [ ! -z "$installed_pcre_version" -a \ "$installed_pcre_version" != "$PCRE_VERSION" ] ; then echo "Installed pcre version is $installed_pcre_version" if [ -z "$PCRE_VERSION" ] ; then echo "pcre is not requested" else echo "Requested pcre version is $PCRE_VERSION" fi uninstall_pcre -r fi if [ -n "$installed_pcre2_version" -a \ "$installed_pcre2_version" != "$PCRE2_VERSION" ] ; then echo "Installed pcre2 version is $installed_pcre2_version" if [ -z "$PCRE2_VERSION" ] ; then echo "pcre2 is not requested" else echo "Requested pcre2 version is $PCRE2_VERSION" fi uninstall_pcre2 -r fi if [ ! -z "$installed_lzip_version" -a \ "$installed_lzip_version" != "$LZIP_VERSION" ] ; then echo "Installed lzip version is $installed_lzip_version" if [ -z "$LZIP_VERSION" ] ; then echo "lzip is not requested" else echo "Requested lzip version is $LZIP_VERSION" fi uninstall_lzip -r fi if [ ! -z "$installed_xz_version" -a \ "$installed_xz_version" != "$XZ_VERSION" ] ; then echo "Installed xz version is $installed_xz_version" if [ -z "$XZ_VERSION" ] ; then echo "xz is not requested" else echo "Requested xz version is $XZ_VERSION" fi uninstall_xz -r fi if [ ! -z "$installed_curl_version" -a \ "$installed_curl_version" != "$CURL_VERSION" ] ; then echo "Installed curl version is $installed_curl_version" if [ -z "$CURL_VERSION" ] ; then echo "curl is not requested" else echo "Requested curl version is $CURL_VERSION" fi uninstall_curl -r fi if [ ! -z "$installed_minizip_version" -a \ "$installed_minizip_version" != "$ZLIB_VERSION" ] ; then echo "Installed minizip (zlib) version is $installed_minizip_version" if [ -z "$ZLIB_VERSION" ] ; then echo "minizip is not requested" else echo "Requested minizip (zlib) version is $ZLIB_VERSION" fi uninstall_minizip -r fi if [ ! -z "$installed_sparkle_version" -a \ "$installed_sparkle_version" != "$SPARKLE_VERSION" ] ; then echo "Installed Sparkle version is $installed_sparkle_version" if [ -z "$SPARKLE_VERSION" ] ; then echo "Sparkle is not requested" else echo "Requested Sparkle version is $SPARKLE_VERSION" fi uninstall_sparkle -r fi # # Start with curl: we may need it to download and install xz. # install_curl # # Now intall xz: it is the sole download format of glib later than 2.31.2. # install_xz install_lzip install_pcre install_autoconf install_automake install_libtool install_cmake install_pcre2 # # Install Python 3 now; not only is it needed for the Wireshark # build process, it's also needed for the Meson build system, # which newer versions of GLib use as their build system. # install_python3 # # Now install Meson and pytest. # install_meson install_pytest install_ninja install_asciidoctor install_asciidoctorpdf # # Start with GNU gettext; GLib requires it, and macOS doesn't have it # or a BSD-licensed replacement. # # At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2 # by default, which causes, for example, stpncpy to be defined as # a hairy macro that collides with the GNU gettext configure script's # attempts to workaround AIX's lack of a declaration for stpncpy, # with the result being a huge train wreck. Define _FORTIFY_SOURCE # as 0 in an attempt to keep the trains on separate tracks. # install_gettext # # GLib depends on pkg-config. # By default, pkg-config depends on GLib; we break the dependency cycle # by configuring pkg-config to use its own internal version of GLib. # install_pkg_config install_glib # # Now we have reached a point where we can build everything but # the GUI (Wireshark). # install_qt # # Now we have reached a point where we can build everything including # the GUI (Wireshark), but not with any optional features such as # SNMP OID resolution, some forms of decryption, Lua scripting, playback # of audio, or MaxMindDB mapping of IP addresses. # # We now conditionally download optional libraries to support them; # the default is to download them all. # install_libsmi install_libgpg_error install_libgcrypt install_gmp install_libtasn1 install_p11_kit install_nettle install_gnutls install_lua install_snappy install_zstd install_libxml2 install_lz4 install_sbc install_maxminddb install_c_ares install_libssh install_nghttp2 install_nghttp3 install_libtiff install_spandsp install_speexdsp install_bcg729 install_ilbc install_opus install_brotli install_minizip install_sparkle } uninstall_all() { if [ -d "${MACOSX_SUPPORT_LIBS}" ] then cd "${MACOSX_SUPPORT_LIBS}" # # Uninstall items in the reverse order from the order in which they're # installed. Only uninstall if the download/build/install process # completed; uninstall the version that appears in the name of # the -done file. # # We also do a "make distclean", so that we don't have leftovers from # old configurations. # uninstall_sparkle uninstall_minizip uninstall_brotli uninstall_opus uninstall_ilbc uninstall_bcg729 uninstall_speexdsp uninstall_spandsp uninstall_libtiff uninstall_nghttp2 uninstall_nghttp3 uninstall_libssh uninstall_c_ares uninstall_maxminddb uninstall_snappy uninstall_zstd uninstall_libxml2 uninstall_lz4 uninstall_sbc uninstall_lua uninstall_gnutls uninstall_nettle uninstall_p11_kit uninstall_libtasn1 uninstall_gmp uninstall_libgcrypt uninstall_libgpg_error uninstall_libsmi uninstall_qt uninstall_glib uninstall_pkg_config uninstall_gettext uninstall_ninja # # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_asciidoctorpdf uninstall_asciidoctor uninstall_pytest uninstall_meson uninstall_python3 uninstall_cmake uninstall_libtool uninstall_automake uninstall_autoconf uninstall_pcre uninstall_lzip uninstall_xz uninstall_curl fi } # # Do we have permission to write in /usr/local? # # If so, assume we have permission to write in its subdirectories. # (If that's not the case, this test needs to check the subdirectories # as well.) # # If not, do "make install", "make uninstall", "ninja install", # "ninja uninstall", the removes for dependencies that don't support # "make uninstall" or "ninja uninstall", the renames of [g]libtool*, # and the writing of a libffi .pc file with sudo. # if [ -w /usr/local ] then DO_MAKE_INSTALL="make install" DO_MAKE_UNINSTALL="make uninstall" DO_NINJA_INSTALL="ninja -C _build install" DO_NINJA_UNINSTALL="ninja -C _build uninstall" DO_TEE_TO_PC_FILE="tee" DO_RM="rm" DO_MV="mv" else DO_MAKE_INSTALL="sudo make install" DO_MAKE_UNINSTALL="sudo make uninstall" DO_NINJA_INSTALL="sudo ninja -C _build install" DO_NINJA_UNINSTALL="sudo ninja -C _build uninstall" DO_TEE_TO_PC_FILE="sudo tee" DO_RM="sudo rm" DO_MV="sudo mv" fi # # When building with CMake, don't build libraries with an install path # that begins with @rpath because that will cause binaries linked with it # to use that path as the library to look for, and that will cause the # run-time linker, at least on macOS 14 and later, not to find the library # in /usr/local/lib unless you explicitly set DYLD_LIBRARY_PATH to include # /usr/local/lib. That means that you get "didn't find libpcre" errors if # you try to run binaries from a build unless you set DYLD_LIBRARYPATH to # include /usr/local/lib. # # However, setting CMAKE_MACOSX_RPATH to OFF causes the installed # library just to have the file name of the library as its install # name. It needs to be the full installed path of the library in # order to make running binaries from the build directory work, so # we set CMAKE_INSTALL_NAME_DIR to /usr/local/lib. # # packaging/macosx/osx-app.sh will convert *all* libraries in # the app bundle to have an @rpath install name, so this won't # break anything there; it just fixes the ability to run from the # build directory. # DO_CMAKE="cmake -DCMAKE_MACOSX_RPATH=OFF -DCMAKE_INSTALL_NAME_DIR=/usr/local/lib" # This script is meant to be run in the source root. The following # code will attempt to get you there, but is not perfect (particulary # if someone copies the script). topdir=`pwd`/`dirname $0`/.. cd $topdir # Preference of the support libraries directory: # ${MACOSX_SUPPORT_LIBS} # ../macosx-support-libs # ./macosx-support-libs (default if none exists) if [ ! -d "${MACOSX_SUPPORT_LIBS}" ]; then unset MACOSX_SUPPORT_LIBS fi if [ -d ../macosx-support-libs ]; then MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-../macosx-support-libs} else MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-./macosx-support-libs} fi # # If we have SDKs available, the default target OS is the major version # of the one we're running; get that and strip off the third component # if present. # for i in /Developer/SDKs \ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ /Library/Developer/CommandLineTools/SDKs do if [ -d "$i" ] then min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'` break fi done # # Parse command-line flags: # # -h - print help. # -t - build libraries so that they'll work on the specified # version of macOS and later versions. # -u - do an uninstall. # -n - download all packages, but don't build or install. # no_build=false while getopts ht:un name do case $name in u) do_uninstall=yes ;; n) no_build=true ;; t) min_osx_target="$OPTARG" ;; h|?) echo "Usage: macos-setup.sh [ -t ] [ -u ] [ -n ]" 1>&1 exit 0 ;; esac done # # Get the version numbers of installed packages, if any. # if [ -d "${MACOSX_SUPPORT_LIBS}" ] then cd "${MACOSX_SUPPORT_LIBS}" installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'` installed_lzip_version=`ls lzip-*-done 2>/dev/null | sed 's/lzip-\(.*\)-done/\1/'` installed_pcre_version=`ls pcre-*-done 2>/dev/null | sed 's/pcre-\(.*\)-done/\1/'` installed_pcre2_version=$(ls pcre2-*-done 2>/dev/null | sed 's/pcre2-\(.*\)-done/\1/') installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'` installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'` installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'` installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'` installed_ninja_version=`ls ninja-*-done 2>/dev/null | sed 's/ninja-\(.*\)-done/\1/'` installed_asciidoctor_version=`ls asciidoctor-*-done 2>/dev/null | sed 's/asciidoctor-\(.*\)-done/\1/'` installed_asciidoctorpdf_version=`ls asciidoctorpdf-*-done 2>/dev/null | sed 's/asciidoctorpdf-\(.*\)-done/\1/'` installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'` installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'` installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'` installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'` installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'` installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'` installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'` installed_gmp_version=`ls gmp-*-done 2>/dev/null | sed 's/gmp-\(.*\)-done/\1/'` installed_libtasn1_version=`ls libtasn1-*-done 2>/dev/null | sed 's/libtasn1-\(.*\)-done/\1/'` installed_p11_kit_version=`ls p11-kit-*-done 2>/dev/null | sed 's/p11-kit-\(.*\)-done/\1/'` installed_nettle_version=`ls nettle-*-done 2>/dev/null | sed 's/nettle-\(.*\)-done/\1/'` installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'` installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'` installed_snappy_version=`ls snappy-*-done 2>/dev/null | sed 's/snappy-\(.*\)-done/\1/'` installed_zstd_version=`ls zstd-*-done 2>/dev/null | sed 's/zstd-\(.*\)-done/\1/'` installed_libxml2_version=`ls libxml2-*-done 2>/dev/null | sed 's/libxml2-\(.*\)-done/\1/'` installed_lz4_version=`ls lz4-*-done 2>/dev/null | sed 's/lz4-\(.*\)-done/\1/'` installed_sbc_version=`ls sbc-*-done 2>/dev/null | sed 's/sbc-\(.*\)-done/\1/'` installed_maxminddb_version=`ls maxminddb-*-done 2>/dev/null | sed 's/maxminddb-\(.*\)-done/\1/'` installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'` installed_libssh_version=`ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/'` installed_nghttp2_version=`ls nghttp2-*-done 2>/dev/null | sed 's/nghttp2-\(.*\)-done/\1/'` installed_nghttp3_version=`ls nghttp3-*-done 2>/dev/null | sed 's/nghttp3-\(.*\)-done/\1/'` installed_libtiff_version=`ls tiff-*-done 2>/dev/null | sed 's/tiff-\(.*\)-done/\1/'` installed_spandsp_version=`ls spandsp-*-done 2>/dev/null | sed 's/spandsp-\(.*\)-done/\1/'` installed_speexdsp_version=`ls speexdsp-*-done 2>/dev/null | sed 's/speexdsp-\(.*\)-done/\1/'` installed_bcg729_version=`ls bcg729-*-done 2>/dev/null | sed 's/bcg729-\(.*\)-done/\1/'` installed_ilbc_version=`ls ilbc-*-done 2>/dev/null | sed 's/ilbc-\(.*\)-done/\1/'` installed_opus_version=`ls opus-*-done 2>/dev/null | sed 's/opus-\(.*\)-done/\1/'` installed_python3_version=`ls python3-*-done 2>/dev/null | sed 's/python3-\(.*\)-done/\1/'` installed_brotli_version=`ls brotli-*-done 2>/dev/null | sed 's/brotli-\(.*\)-done/\1/'` installed_minizip_version=`ls minizip-*-done 2>/dev/null | sed 's/minizip-\(.*\)-done/\1/'` installed_sparkle_version=`ls sparkle-*-done 2>/dev/null | sed 's/sparkle-\(.*\)-done/\1/'` cd $topdir fi if [ "$do_uninstall" = "yes" ] then uninstall_all exit 0 fi # # Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if # invoked without CFLAGS or CXXFLAGS being set in the environment. # # However, we *are* setting them in the environment, for our own # nefarious purposes, so start them out as "-g -O2". # CFLAGS="-g -O2" CXXFLAGS="-g -O2" # if no make options are present, set default options if [ -z "$MAKE_BUILD_OPTS" ] ; then # by default use 1.5x number of cores for parallel build MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))" fi # # If we have a target release, look for the oldest SDK that's for an # OS equal to or later than that one, and build libraries against it # rather than against the headers and, more importantly, libraries # that come with the OS, so that we don't end up with support libraries # that only work on the OS version on which we built them, not earlier # versions of the same release, or earlier releases if the minimum is # earlier. # if [ ! -z "$min_osx_target" ] then # # Get the major and minor version of the target release. # We assume it'll be a while before there's a macOS 100. :-) # case "$min_osx_target" in [1-9][0-9].*) # # major.minor. # min_osx_target_major=`echo "$min_osx_target" | sed -n 's/\([1-9][0-9]*\)\..*/\1/p'` min_osx_target_minor=`echo "$min_osx_target" | sed -n 's/[1-9][0-9]*\.\(.*\)/\1/p'` ;; [1-9][0-9]) # # Just a major version number was specified; make the minor # version 0. # min_osx_target_major="$min_osx_target" min_osx_target_minor=0 ;; *) echo "macosx-setup.sh: Invalid target release $min_osx_target" 1>&2 exit 1 ;; esac # # Search each directory that might contain SDKs. # sdkpath="" for sdksdir in /Developer/SDKs \ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ /Library/Developer/CommandLineTools/SDKs do # # Get a list of all the SDKs. # if ! test -d "$sdksdir" then # # There is no directory with that name. # Move on to the next one in the list, if any. # continue fi # # Get a list of all the SDKs in that directory, if any. # We assume it'll be a while before there's a macOS 100. :-) # sdklist=`(cd "$sdksdir"; ls -d MacOSX[1-9][0-9].[0-9]*.sdk 2>/dev/null)` for sdk in $sdklist do # # Get the major and minor version for this SDK. # sdk_major=`echo "$sdk" | sed -n 's/MacOSX\([1-9][0-9]*\)\..*\.sdk/\1/p'` sdk_minor=`echo "$sdk" | sed -n 's/MacOSX[1-9][0-9]*\.\(.*\)\.sdk/\1/p'` # # Is it for the deployment target or some later release? # Starting with major 11, the minor version no longer matters. # if test "$sdk_major" -gt "$min_osx_target_major" -o \ \( "$sdk_major" -eq "$min_osx_target_major" -a \ \( "$sdk_major" -ge 11 -o \ "$sdk_minor" -ge "$min_osx_target_minor" \) \) then # # Yes, use it. # sdkpath="$sdksdir/$sdk" break 2 fi done done if [ -z "$sdkpath" ] then echo "macos-setup.sh: Couldn't find an SDK for macOS $min_osx_target or later" 1>&2 exit 1 fi SDKPATH="$sdkpath" echo "Using the $sdk_major.$sdk_minor SDK" # # Make sure there are links to /usr/local/include and /usr/local/lib # in the SDK's usr/local. # if [ ! -e $SDKPATH/usr/local/include ] then if [ ! -d $SDKPATH/usr/local ] then sudo mkdir $SDKPATH/usr/local fi sudo ln -s /usr/local/include $SDKPATH/usr/local/include fi if [ ! -e $SDKPATH/usr/local/lib ] then if [ ! -d $SDKPATH/usr/local ] then sudo mkdir $SDKPATH/usr/local fi sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib fi # # Set the minimum OS version for which to build to the specified # minimum target OS version, so we don't, for example, end up using # linker features supported by the OS verson on which we're building # but not by the target version. # VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target" # # Compile and link against the SDK. # SDKFLAGS="-isysroot $SDKPATH" fi export CFLAGS export CXXFLAGS # # You need Xcode or the command-line tools installed to get the compilers (xcrun checks both). # if [ ! -x /usr/bin/xcrun ]; then echo "Please install Xcode (app or command line) first (should be available on DVD or from the Mac App Store)." exit 1 fi if [ "$QT_VERSION" ]; then # # We need Xcode, not just the command-line tools, installed to build # Qt. # # At least with Xcode 8, /usr/bin/xcodebuild --help fails if only # the command-line tools are installed and succeeds if Xcode is # installed. Unfortunately, it fails *with* Xcode 3, but # /usr/bin/xcodebuild -version works with that and with Xcode 8. # Hopefully it fails with only the command-line tools installed. # if /usr/bin/xcodebuild -version >/dev/null 2>&1; then : elif qmake --version >/dev/null 2>&1; then : else echo "Please install Xcode first (should be available on DVD or from the Mac App Store)." echo "The command-line build tools are not sufficient to build Qt." echo "Alternatively build QT according to: https://gist.github.com/shoogle/750a330c851bd1a924dfe1346b0b4a08#:~:text=MacOS%2FQt%5C%20Creator-,Go%20to%20Qt%20Creator%20%3E%20Preferences%20%3E%20Build%20%26%20Run%20%3E%20Kits,for%20both%20compilers%2C%20not%20gcc%20." exit 1 fi fi export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig # # Do all the downloads and untarring in a subdirectory, so all that # stuff can be removed once we've installed the support libraries. if [ ! -d "${MACOSX_SUPPORT_LIBS}" ] then mkdir "${MACOSX_SUPPORT_LIBS}" || exit 1 fi cd "${MACOSX_SUPPORT_LIBS}" install_all echo "" # # Indicate what paths to use for pkg-config and cmake. # pkg_config_path=/usr/local/lib/pkgconfig if [ "$QT_VERSION" ]; then qt_base_path=$HOME/Qt$QT_VERSION/$QT_VERSION/clang_64 pkg_config_path="$pkg_config_path":"$qt_base_path/lib/pkgconfig" CMAKE_PREFIX_PATH="$CMAKE_PREFIX_PATH":"$qt_base_path/lib/cmake" fi if $no_build; then echo "All required dependencies downloaded. Run without -n to install them." exit 0 fi if [ "$QT_VERSION" ]; then if [ -f qt-$QT_VERSION-done ]; then echo "You are now prepared to build Wireshark." else echo "Qt was not installed; you will have to install it in order to build the" echo "Wireshark application, but you can build all the command-line tools in" echo "the Wireshark distribution." echo "" echo "See section 2.1.1. \"Build environment setup\" of the Wireshark Developer's" echo "Guide for instructions on how to install Qt." fi else echo "You did not install Qt; you will have to install it in order to build" echo "the Wireshark application, but you can build all the command-line tools in" echo "the Wireshark distribution." fi echo echo "To build:" echo echo "export PKG_CONFIG_PATH=$pkg_config_path" echo "export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH" echo "export PATH=$PATH:$qt_base_path/bin" echo echo "mkdir build; cd build" if [ ! -z "$NINJA_VERSION" ]; then echo "cmake -G Ninja .." echo "ninja wireshark_app_bundle logray_app_bundle # (Modify as needed)" echo "ninja install/strip" else echo "cmake .." echo "make $MAKE_BUILD_OPTS wireshark_app_bundle logray_app_bundle # (Modify as needed)" echo "make install/strip" fi echo echo "Make sure you are allowed capture access to the network devices" echo "See: https://gitlab.com/wireshark/wireshark/-/wikis/CaptureSetup/CapturePrivileges" echo exit 0