From 5262a872f308b3b584c97d621992fb3877e392b8 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 05:10:08 +0200 Subject: Adding upstream version 5.6.1+really5.4.5. Signed-off-by: Daniel Baumann --- INSTALL | 765 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 765 insertions(+) create mode 100644 INSTALL (limited to 'INSTALL') diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..7ef2cb4 --- /dev/null +++ b/INSTALL @@ -0,0 +1,765 @@ + +XZ Utils Installation +===================== + + 0. Preface + 1. Supported platforms + 1.1. Compilers + 1.2. Platform-specific notes + 1.2.1. AIX + 1.2.2. IRIX + 1.2.3. MINIX 3 + 1.2.4. OpenVMS + 1.2.5. Solaris, OpenSolaris, and derivatives + 1.2.6. Tru64 + 1.2.7. Windows + 1.2.8. DOS + 1.2.9. z/OS + 1.3. Adding support for new platforms + 2. configure options + 2.1. Static vs. dynamic linking of liblzma + 2.2. Optimizing xzdec and lzmadec + 3. xzgrep and other scripts + 3.1. Dependencies + 3.2. PATH + 4. Tests + 4.1 Testing in parallel + 4.2 Cross compiling + 5. Troubleshooting + 5.1. "No C99 compiler was found." + 5.2. "No POSIX conforming shell (sh) was found." + 5.3. configure works but build fails at crc32_x86.S + 5.4. Lots of warnings about symbol visibility + 5.5. "make check" fails + 5.6. liblzma.so (or similar) not found when running xz + + +0. Preface +---------- + + If you aren't familiar with building packages that use GNU Autotools, + see the file INSTALL.generic for generic instructions before reading + further. + + If you are going to build a package for distribution, see also the + file PACKAGERS. It contains information that should help making the + binary packages as good as possible, but the information isn't very + interesting to those making local builds for private use or for use + in special situations like embedded systems. + + +1. Supported platforms +---------------------- + + XZ Utils are developed on GNU/Linux, but they should work on many + POSIX-like operating systems like *BSDs and Solaris, and even on + a few non-POSIX operating systems. + + +1.1. Compilers + + A C99 compiler is required to compile XZ Utils. If you use GCC, you + need at least version 3.x.x. GCC version 2.xx.x doesn't support some + C99 features used in XZ Utils source code, thus GCC 2 won't compile + XZ Utils. + + XZ Utils takes advantage of some GNU C extensions when building + with GCC. Because these extensions are used only when building + with GCC, it should be possible to use any C99 compiler. + + +1.2. Platform-specific notes + +1.2.1. AIX + + If you use IBM XL C compiler, pass CC=xlc_r to configure. If + you use CC=xlc instead, you must disable threading support + with --disable-threads (usually not recommended). + + +1.2.2. IRIX + + MIPSpro 7.4.4m has been reported to produce broken code if using + the -O2 optimization flag ("make check" fails). Using -O1 should + work. + + A problem has been reported when using shared liblzma. Passing + --disable-shared to configure works around this. Alternatively, + putting "-64" to CFLAGS to build a 64-bit version might help too. + + +1.2.3. MINIX 3 + + The default install of MINIX 3 includes Amsterdam Compiler Kit (ACK), + which doesn't support C99. Install GCC to compile XZ Utils. + + MINIX 3.1.8 and older have bugs in /usr/include/stdint.h, which has + to be patched before XZ Utils can be compiled correctly. See + . + + MINIX 3.2.0 and later use a different libc and aren't affected by + the above bug. + + XZ Utils doesn't have code to detect the amount of physical RAM and + number of CPU cores on MINIX 3. + + See section 5.4 in this file about symbol visibility warnings (you + may want to pass gl_cv_cc_visibility=no to configure). + + +1.2.4. OpenVMS + + XZ Utils can be built for OpenVMS, but the build system files + are not included in the XZ Utils source package. The required + OpenVMS-specific files are maintained by Jouk Jansen and can be + downloaded here: + + http://nchrem.tnw.tudelft.nl/openvms/software2.html#xzutils + + +1.2.5. Solaris, OpenSolaris, and derivatives + + The following linker error has been reported on some x86 systems: + + ld: fatal: relocation error: R_386_GOTOFF: ... + + This can be worked around by passing gl_cv_cc_visibility=no + as an argument to the configure script. + + test_scripts.sh in "make check" may fail if good enough tools are + missing from PATH (/usr/xpg4/bin or /usr/xpg6/bin). Nowadays + /usr/xpg4/bin is added to the script PATH by default on Solaris + (see --enable-path-for-scripts=PREFIX in section 2), but old xz + releases needed extra steps. See sections 5.5 and 3.2 for more + information. + + +1.2.6. Tru64 + + If you try to use the native C compiler on Tru64 (passing CC=cc to + configure), you may need the workaround mention in section 5.1 in + this file (pass also ac_cv_prog_cc_c99= to configure). + + +1.2.7. Windows + + If it is enough to build liblzma (no command line tools): + + - There is CMake support. It should be good enough to build + static liblzma or liblzma.dll with Visual Studio. The CMake + support may work with MinGW or MinGW-w64. Read the comment + in the beginning of CMakeLists.txt before running CMake! + + - There are Visual Studio project files under the "windows" + directory. See windows/INSTALL-MSVC.txt. In the future the + project files will be removed when CMake support is good + enough. Thus, please test the CMake version and help fix + possible issues. + + To build also the command line tools: + + - MinGW-w64 + MSYS (32-bit and 64-bit x86): This is used + for building the official binary packages for Windows. + There is windows/build.bash to ease packaging XZ Utils with + MinGW(-w64) + MSYS into a redistributable .zip or .7z file. + See windows/INSTALL-MinGW.txt for more information. + + - MinGW + MSYS (32-bit x86): I haven't recently tested this. + + - Cygwin 1.7.35 and later: NOTE that using XZ Utils >= 5.2.0 + under Cygwin older than 1.7.35 can lead to DATA LOSS! If + you must use an old Cygwin version, stick to XZ Utils 5.0.x + which is safe under older Cygwin versions. You can check + the Cygwin version with the command "cygcheck -V". + + It may be possible to build liblzma with other toolchains too, but + that will probably require writing a separate makefile. Building + the command line tools with non-GNU toolchains will be harder than + building only liblzma. + + Even if liblzma is built with MinGW(-w64), the resulting DLL can + be used by other compilers and linkers, including MSVC. See + windows/README-Windows.txt for details. + + +1.2.8. DOS + + There is a Makefile in the "dos" directory to build XZ Utils on + DOS using DJGPP. Support for long file names (LFN) is needed at + build time but the resulting xz.exe works without LFN support too. + See dos/INSTALL.txt and dos/README.txt for more information. + + +1.2.9. z/OS + + To build XZ Utils on z/OS UNIX System Services using xlc, pass + these options to the configure script: CC='xlc -qhaltonmsg=CCN3296' + CPPFLAS='-D_UNIX03_THREADS -D_XOPEN_SOURCE=600'. The first makes + xlc throw an error if a header file is missing, which is required + to make the tests in configure work. The CPPFLAGS are needed to + get pthread support (some other CPPFLAGS may work too; if there + are problems, try -D_UNIX95_THREADS instead of -D_UNIX03_THREADS). + + test_scripts.sh in "make check" will fail even if the scripts + actually work because the test data includes compressed files + with US-ASCII text. + + No other tests should fail. If test_files.sh fails, check that + the included .xz test files weren't affected by EBCDIC conversion. + + XZ Utils doesn't have code to detect the amount of physical RAM and + number of CPU cores on z/OS. + + +1.3. Adding support for new platforms + + If you have written patches to make XZ Utils to work on previously + unsupported platform, please send the patches to me! I will consider + including them to the official version. It's nice to minimize the + need of third-party patching. + + One exception: Don't request or send patches to change the whole + source package to C89. I find C99 substantially nicer to write and + maintain. However, the public library headers must be in C89 to + avoid frustrating those who maintain programs, which are strictly + in C89 or C++. + + +2. configure options +-------------------- + + In most cases, the defaults are what you want. Many of the options + below are useful only when building a size-optimized version of + liblzma or command line tools. + + --enable-encoders=LIST + --disable-encoders + Specify a comma-separated LIST of filter encoders to + build. See "./configure --help" for exact list of + available filter encoders. The default is to build all + supported encoders. + + If LIST is empty or --disable-encoders is used, no filter + encoders will be built and also the code shared between + encoders will be omitted. + + Disabling encoders will remove some symbols from the + liblzma ABI, so this option should be used only when it + is known to not cause problems. + + --enable-decoders=LIST + --disable-decoders + This is like --enable-encoders but for decoders. The + default is to build all supported decoders. + + --enable-match-finders=LIST + liblzma includes two categories of match finders: + hash chains and binary trees. Hash chains (hc3 and hc4) + are quite fast but they don't provide the best compression + ratio. Binary trees (bt2, bt3 and bt4) give excellent + compression ratio, but they are slower and need more + memory than hash chains. + + You need to enable at least one match finder to build the + LZMA1 or LZMA2 filter encoders. Usually hash chains are + used only in the fast mode, while binary trees are used to + when the best compression ratio is wanted. + + The default is to build all the match finders if LZMA1 + or LZMA2 filter encoders are being built. + + --enable-checks=LIST + liblzma support multiple integrity checks. CRC32 is + mandatory, and cannot be omitted. See "./configure --help" + for exact list of available integrity check types. + + liblzma and the command line tools can decompress files + which use unsupported integrity check type, but naturally + the file integrity cannot be verified in that case. + + Disabling integrity checks may remove some symbols from + the liblzma ABI, so this option should be used only when + it is known to not cause problems. + + --enable-external-sha256 + Try to use SHA-256 code from the operating system libc + or similar base system libraries. This doesn't try to + use OpenSSL or libgcrypt or such libraries. + + The reasons to use this option: + + - It makes liblzma slightly smaller. + + - It might improve SHA-256 speed if the implementation + in the operating is very good (but see below). + + External SHA-256 is disabled by default for two reasons: + + - On some operating systems the symbol names of the + SHA-256 functions conflict with OpenSSL's libcrypto. + This causes weird problems such as decompression + errors if an application is linked against both + liblzma and libcrypto. This problem affects at least + FreeBSD 10 and older and MINIX 3.3.0 and older, but + other OSes that provide a function "SHA256_Init" might + also be affected. FreeBSD 11 has the problem fixed. + NetBSD had the problem but it was fixed it in 2009 + already. OpenBSD uses "SHA256Init" and thus never had + a conflict with libcrypto. + + - The SHA-256 code in liblzma is faster than the SHA-256 + code provided by some operating systems. If you are + curious, build two copies of xz (internal and external + SHA-256) and compare the decompression (xz --test) + times: + + dd if=/dev/zero bs=1024k count=1024 \ + | xz -v -0 -Csha256 > foo.xz + time xz --test foo.xz + + --disable-microlzma + Don't build MicroLZMA encoder and decoder. This omits + lzma_microlzma_encoder() and lzma_microlzma_decoder() + API functions from liblzma. These functions are needed + by specific applications only. They were written for + erofs-utils but they may be used by others too. + + --disable-lzip-decoder + Disable decompression support for .lz (lzip) files. + This omits the API function lzma_lzip_decoder() from + liblzma and .lz support from the xz tool. + + --disable-xz + --disable-xzdec + --disable-lzmadec + --disable-lzmainfo + Don't build and install the command line tool mentioned + in the option name. + + NOTE: Disabling xz will skip some tests in "make check". + + NOTE: If xzdec is disabled and lzmadec is left enabled, + a dangling man page symlink lzmadec.1 -> xzdec.1 is + created. + + --disable-lzma-links + Don't create symlinks for LZMA Utils compatibility. + This includes lzma, unlzma, and lzcat. If scripts are + installed, also lzdiff, lzcmp, lzgrep, lzegrep, lzfgrep, + lzmore, and lzless will be omitted if this option is used. + + --disable-scripts + Don't install the scripts xzdiff, xzgrep, xzmore, xzless, + and their symlinks. + + --disable-doc + Don't install the documentation files to $docdir + (often /usr/doc/xz or /usr/local/doc/xz). Man pages + will still be installed. The $docdir can be changed + with --docdir=DIR. + + --disable-assembler + liblzma includes some assembler optimizations. Currently + there is only assembler code for CRC32 and CRC64 for + 32-bit x86. + + All the assembler code in liblzma is position-independent + code, which is suitable for use in shared libraries and + position-independent executables. So far only i386 + instructions are used, but the code is optimized for i686 + class CPUs. If you are compiling liblzma exclusively for + pre-i686 systems, you may want to disable the assembler + code. + + --disable-clmul-crc + Disable the use carryless multiplication for CRC + calculation even if compiler support for it is detected. + The code uses runtime detection of SSSE3, SSE4.1, and + CLMUL instructions on x86. On 32-bit x86 this currently + is used only if --disable-assembler is used (this might + be fixed in the future). The code works on E2K too. + + If using compiler options that unconditionally allow the + required extensions (-msse4.1 -mpclmul) then runtime + detection isn't used and the generic code is omitted. + + --enable-unaligned-access + Allow liblzma to use unaligned memory access for 16-bit, + 32-bit, and 64-bit loads and stores. This should be + enabled only when the hardware supports this, that is, + when unaligned access is fast. Some operating system + kernels emulate unaligned access, which is extremely + slow. This option shouldn't be used on systems that + rely on such emulation. + + Unaligned access is enabled by default on x86, x86-64, + big endian PowerPC, some ARM, and some ARM64 systems. + + --enable-unsafe-type-punning + This enables use of code like + + uint8_t *buf8 = ...; + *(uint32_t *)buf8 = ...; + + which violates strict aliasing rules and may result + in broken code. There should be no need to use this + option with recent GCC or Clang versions on any + arch as just as fast code can be generated in a safe + way too (using __builtin_assume_aligned + memcpy). + + However, this option might improve performance in some + other cases, especially with old compilers (for example, + GCC 3 and early 4.x on x86, GCC < 6 on ARMv6 and ARMv7). + + --enable-small + Reduce the size of liblzma by selecting smaller but + semantically equivalent version of some functions, and + omit precomputed lookup tables. This option tends to + make liblzma slightly slower. + + Note that while omitting the precomputed tables makes + liblzma smaller on disk, the tables are still needed at + run time, and need to be computed at startup. This also + means that the RAM holding the tables won't be shared + between applications linked against shared liblzma. + + This option doesn't modify CFLAGS to tell the compiler + to optimize for size. You need to add -Os or equivalent + flag(s) to CFLAGS manually. + + --enable-assume-ram=SIZE + On the most common operating systems, XZ Utils is able to + detect the amount of physical memory on the system. This + information is used by the options --memlimit-compress, + --memlimit-decompress, and --memlimit when setting the + limit to a percentage of total RAM. + + On some systems, there is no code to detect the amount of + RAM though. Using --enable-assume-ram one can set how much + memory to assume on these systems. SIZE is given as MiB. + The default is 128 MiB. + + Feel free to send patches to add support for detecting + the amount of RAM on the operating system you use. See + src/common/tuklib_physmem.c for details. + + --enable-threads=METHOD + Threading support is enabled by default so normally there + is no need to specify this option. + + Supported values for METHOD: + + yes Autodetect the threading method. If none + is found, configure will give an error. + + posix Use POSIX pthreads. This is the default + except on Windows outside Cygwin. + + win95 Use Windows 95 compatible threads. This + is compatible with Windows XP and later + too. This is the default for 32-bit x86 + Windows builds. Unless the compiler + supports __attribute__((__constructor__)), + the `win95' threading is incompatible with + --enable-small. + + vista Use Windows Vista compatible threads. The + resulting binaries won't run on Windows XP + or older. This is the default for Windows + excluding 32-bit x86 builds (that is, on + x86-64 the default is `vista'). + + no Disable threading support. This is the + same as using --disable-threads. + NOTE: If combined with --enable-small + and the compiler doesn't support + __attribute__((__constructor__)), the + resulting liblzma won't be thread safe, + that is, if a multi-threaded application + calls any liblzma functions from more than + one thread, something bad may happen. + + --enable-sandbox=METHOD + There is limited sandboxing support in the xz tool. If + built with sandbox support, it's used automatically when + (de)compressing exactly one file to standard output and + the options --files or --files0 weren't used. This is a + common use case, for example, (de)compressing .tar.xz + files via GNU tar. The sandbox is also used for + single-file `xz --test' or `xz --list'. + + Supported METHODs: + + auto Look for a supported sandboxing method + and use it if found. If no method is + found, then sandboxing isn't used. + This is the default. + + no Disable sandboxing support. + + capsicum + Use Capsicum (FreeBSD >= 10) for + sandboxing. If no Capsicum support + is found, configure will give an error. + + pledge Use pledge(2) (OpenBSD >= 5.9) for + sandboxing. If pledge(2) isn't found, + configure will give an error. + + --enable-symbol-versions + Use symbol versioning for liblzma. This is enabled by + default on GNU/Linux, other GNU-based systems, and + FreeBSD. + + --enable-debug + This enables the assert() macro and possibly some other + run-time consistency checks. It makes the code slower, so + you normally don't want to have this enabled. + + --enable-werror + If building with GCC, make all compiler warnings an error, + that abort the compilation. This may help catching bugs, + and should work on most systems. This has no effect on the + resulting binaries. + + --enable-path-for-scripts=PREFIX + If PREFIX isn't empty, PATH=PREFIX:$PATH will be set in + the beginning of the scripts (xzgrep and others). + The default is empty except on Solaris the default is + /usr/xpg4/bin. + + This can be useful if the default PATH doesn't contain + modern POSIX tools (as can be the case on Solaris) or if + one wants to ensure that the correct xz binary is in the + PATH for the scripts. Note that the latter use can break + "make check" if the prefixed PATH causes a wrong xz binary + (other than the one that was just built) to be used. + + Older xz releases support a different method for setting + the PATH for the scripts. It is described in section 3.2 + and is supported in this xz version too. + + +2.1. Static vs. dynamic linking of liblzma + + On 32-bit x86, linking against static liblzma can give a minor + speed improvement. Static libraries on x86 are usually compiled as + position-dependent code (non-PIC) and shared libraries are built as + position-independent code (PIC). PIC wastes one register, which can + make the code slightly slower compared to a non-PIC version. (Note + that this doesn't apply to x86-64.) + + If you want to link xz against static liblzma, the simplest way + is to pass --disable-shared to configure. If you want also shared + liblzma, run configure again and run "make install" only for + src/liblzma. + + +2.2. Optimizing xzdec and lzmadec + + xzdec and lzmadec are intended to be relatively small instead of + optimizing for the best speed. Thus, it is a good idea to build + xzdec and lzmadec separately: + + - To link the tools against static liblzma, pass --disable-shared + to configure. + + - To select somewhat size-optimized variant of some things in + liblzma, pass --enable-small to configure. + + - Tell the compiler to optimize for size instead of speed. + For example, with GCC, put -Os into CFLAGS. + + - xzdec and lzmadec will never use multithreading capabilities of + liblzma. You can avoid dependency on libpthread by passing + --disable-threads to configure. + + - There are and will be no translated messages for xzdec and + lzmadec, so it is fine to pass also --disable-nls to configure. + + - Only decoder code is needed, so you can speed up the build + slightly by passing --disable-encoders to configure. This + shouldn't affect the final size of the executables though, + because the linker is able to omit the encoder code anyway. + + If you have no use for xzdec or lzmadec, you can disable them with + --disable-xzdec and --disable-lzmadec. + + +3. xzgrep and other scripts +--------------------------- + +3.1. Dependencies + + POSIX shell (sh) and bunch of other standard POSIX tools are required + to run the scripts. The configure script tries to find a POSIX + compliant sh, but if it fails, you can force the shell by passing + gl_cv_posix_shell=/path/to/posix-sh as an argument to the configure + script. + + xzdiff (xzcmp/lzdiff/lzcmp) may use mktemp if it is available. As + a fallback xzdiff will use mkdir to securely create a temporary + directory. Having mktemp available is still recommended since the + mkdir fallback method isn't as robust as mktemp is. The original + mktemp can be found from . On GNU, most will + use the mktemp program from GNU coreutils instead of the original + implementation. Both mktemp versions are fine. + + In addition to using xz to decompress .xz files, xzgrep and xzdiff + use gzip, bzip2, and lzop to support .gz, bz2, and .lzo files. + + +3.2. PATH + + The method described below is supported by older xz releases. + It is supported by the current version too, but the newer + --enable-path-for-scripts=PREFIX described in section 2 may be + more convenient. + + The scripts assume that the required tools (standard POSIX utilities, + mktemp, and xz) are in PATH; the scripts don't set the PATH themselves + (except as described for --enable-path-for-scripts=PREFIX). Some + people like this while some think this is a bug. Those in the latter + group can easily patch the scripts before running the configure script + by taking advantage of a placeholder line in the scripts. + + For example, to make the scripts prefix /usr/bin:/bin to PATH: + + perl -pi -e 's|^#SET_PATH.*$|PATH=/usr/bin:/bin:\$PATH|' \ + src/scripts/xz*.in + + +4. Tests +-------- + + The test framework can be built and run by executing "make check" in + the build directory. The tests are a mix of executables and POSIX + shell scripts (sh). All tests should pass if the default configuration + is used. Disabling features through the configure options may cause + some tests to be skipped. If any tests do not pass, see section 5.5. + + +4.1. Testing in parallel + + The tests can be run in parallel using the "-j" make option on systems + that support it. For instance, "make -j4 check" will run up to four + tests simultaneously. + + +4.2. Cross compiling + + The tests can be built without running them: + + make check TESTS= + + The TESTS variable is the list of tests you wish to run. Leaving it + empty will compile the tests without running any. + + If the tests are copied to a target machine to execute, the test data + files in the directory tests/files must also be copied. The tests + search for the data files using the environment variable $srcdir, + expecting to find the data files under $srcdir/files/. If $srcdir + isn't set then it defaults to the current directory. + + The shell script tests can be copied from the source directory to the + target machine to execute. In addition to the test files, these tests + will expect the following relative file paths to execute properly: + + ./create_compress_files + ../config.h + ../src/xz/xz + ../src/xzdec/xzdec + ../src/scripts/xzdiff + ../src/scripts/xzgrep + + +5. Troubleshooting +------------------ + +5.1. "No C99 compiler was found." + + You need a C99 compiler to build XZ Utils. If the configure script + cannot find a C99 compiler and you think you have such a compiler + installed, set the compiler command by passing CC=/path/to/c99 as + an argument to the configure script. + + If you get this error even when you think your compiler supports C99, + you can override the test by passing ac_cv_prog_cc_c99= as an argument + to the configure script. The test for C99 compiler is not perfect (and + it is not as easy to make it perfect as it sounds), so sometimes this + may be needed. You will get a compile error if your compiler doesn't + support enough C99. + + +5.2. "No POSIX conforming shell (sh) was found." + + xzgrep and other scripts need a shell that (roughly) conforms + to POSIX. The configure script tries to find such a shell. If + it fails, you can force the shell to be used by passing + gl_cv_posix_shell=/path/to/posix-sh as an argument to the configure + script. Alternatively you can omit the installation of scripts and + this error by passing --disable-scripts to configure. + + +5.3. configure works but build fails at crc32_x86.S + + The easy fix is to pass --disable-assembler to the configure script. + + The configure script determines if assembler code can be used by + looking at the configure triplet; there is currently no check if + the assembler code can actually actually be built. The x86 assembler + code should work on x86 GNU/Linux, *BSDs, Solaris, Darwin, MinGW, + Cygwin, and DJGPP. On other x86 systems, there may be problems and + the assembler code may need to be disabled with the configure option. + + If you get this error when building for x86-64, you have specified or + the configure script has misguessed your architecture. Pass the + correct configure triplet using the --build=CPU-COMPANY-SYSTEM option + (see INSTALL.generic). + + +5.4. Lots of warnings about symbol visibility + + On some systems where symbol visibility isn't supported, GCC may + still accept the visibility options and attributes, which will make + configure think that visibility is supported. This will result in + many compiler warnings. You can avoid the warnings by forcing the + visibility support off by passing gl_cv_cc_visibility=no as an + argument to the configure script. This has no effect on the + resulting binaries, but fewer warnings looks nicer and may allow + using --enable-werror. + + +5.5. "make check" fails + + If the other tests pass but test_scripts.sh fails, then the problem + is in the scripts in src/scripts. Comparing the contents of + tests/xzgrep_test_output to tests/xzgrep_expected_output might + give a good idea about problems in xzgrep. One possibility is that + some tools are missing from the current PATH or the tools lack + support for some POSIX features. This can happen at least on + Solaris where the tools in /bin may be ancient but good enough + tools are available in /usr/xpg4/bin or /usr/xpg6/bin. For possible + fixes, see --enable-path-for-scripts=PREFIX in section 2 and the + older alternative method described in section 3.2 of this file. + + If tests other than test_scripts.sh fail, a likely reason is that + libtool links the test programs against an installed version of + liblzma instead of the version that was just built. This is + obviously a bug which seems to happen on some platforms. + A workaround is to uninstall the old liblzma versions first. + + If the problem isn't any of those described above, then it's likely + a bug in XZ Utils or in the compiler. See the platform-specific + notes in this file for possible known problems. Please report + a bug if you cannot solve the problem. See README for contact + information. + + +5.6. liblzma.so (or similar) not found when running xz + + If you installed the package with "make install" and get an error + about liblzma.so (or a similarly named file) being missing, try + running "ldconfig" to update the run-time linker cache (if your + operating system has such a command). + -- cgit v1.2.3