From 3b9b6d0b8e7f798023c9d109c490449d528fde80 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 17:59:48 +0200
Subject: Adding upstream version 1:9.18.19.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 bin/tests/system/mirror/tests.sh | 558 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 558 insertions(+)
 create mode 100644 bin/tests/system/mirror/tests.sh

(limited to 'bin/tests/system/mirror/tests.sh')

diff --git a/bin/tests/system/mirror/tests.sh b/bin/tests/system/mirror/tests.sh
new file mode 100644
index 0000000..dc6cffa
--- /dev/null
+++ b/bin/tests/system/mirror/tests.sh
@@ -0,0 +1,558 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+set -e
+
+. ../conf.sh
+
+DIGOPTS="-p ${PORT} -b 10.53.0.1 +dnssec +time=2 +tries=1 +multi"
+RNDCCMD="$RNDC -c ../common/rndc.conf -p ${CONTROLPORT} -s"
+
+# Wait until the transfer of the given zone to ns3 either completes
+# successfully or is aborted by a verification failure or a REFUSED response
+# from the primary.  Note that matching on any transfer status is deliberately
+# avoided because some checks performed by this test cause transfer attempts to
+# end with the "IXFR failed" status, which is followed by an AXFR retry and
+# this test needs to check what the result of the latter transfer attempt is.
+wait_for_transfer() {
+	zone=$1
+	for i in 1 2 3 4 5 6 7 8 9 10; do
+		# Wait until a "freeing transfer context" message is logged
+		# after one of the transfer results we are looking for is
+		# logged.  This is needed to prevent races when checking for
+		# "mirror zone is now in use" messages.
+		nextpartpeek ns3/named.run | \
+			awk "matched; /'$zone\/IN'.*Transfer status: (success|verify failure|REFUSED)/ {matched=1}" | \
+			grep "'$zone/IN'.*freeing transfer context" > /dev/null && return
+		sleep 1
+	done
+	echo_i "exceeded time limit waiting for proof of '$zone' being transferred to appear in ns3/named.run"
+	ret=1
+}
+
+# Wait until loading the given zone on the given server either completes
+# successfully for the specified serial number or fails.
+wait_for_load() {
+	zone=$1
+	serial=$2
+	log=$3
+	for i in 1 2 3 4 5 6 7 8 9 10; do
+		# Wait until a "zone_postload: (...): done" message is logged
+		# after one of the loading-related messages we are looking for
+		# is logged.  This is needed to prevent races when checking for
+		# "mirror zone is now in use" messages.
+		nextpartpeek $log | \
+			awk "matched; /$zone.*(loaded serial $serial|unable to load)/ {matched=1}" | \
+			grep "zone_postload: zone $zone/IN: done" > /dev/null && return
+		sleep 1
+	done
+	echo_i "exceeded time limit waiting for proof of '$zone' being loaded to appear in $log"
+	ret=1
+}
+
+# Trigger a reload of ns2 and wait until loading the given zone completes.
+reload_zone() {
+	zone=$1
+	serial=$2
+	rndc_reload ns2 10.53.0.2
+	wait_for_load $zone $serial ns2/named.run
+}
+
+status=0
+n=0
+
+ORIGINAL_SERIAL=$(awk '$2 == "SOA" {print $5}' ns2/verify.db.in)
+UPDATED_SERIAL_BAD=$((ORIGINAL_SERIAL + 1))
+UPDATED_SERIAL_GOOD=$((ORIGINAL_SERIAL + 2))
+
+n=$((n + 1))
+echo_i "checking that an unsigned mirror zone is rejected ($n)"
+ret=0
+wait_for_transfer verify-unsigned
+$DIG $DIGOPTS @10.53.0.3 +norec verify-unsigned SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null || ret=1
+grep "${ORIGINAL_SERIAL}.*; serial" dig.out.ns3.test$n > /dev/null && ret=1
+nextpartpeek ns3/named.run | grep "verify-unsigned.*Zone contains no DNSSEC keys" > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-unsigned.*mirror zone is now in use" > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that a mirror zone signed using an untrusted key is rejected ($n)"
+ret=0
+nextpartreset ns3/named.run
+wait_for_transfer verify-untrusted
+$DIG $DIGOPTS @10.53.0.3 +norec verify-untrusted SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null || ret=1
+grep "${ORIGINAL_SERIAL}.*; serial" dig.out.ns3.test$n > /dev/null && ret=1
+nextpartpeek ns3/named.run | grep "verify-untrusted.*No trusted DNSKEY found" > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-untrusted.*mirror zone is now in use" > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that a mirror zone signed using a CSK without the SEP bit set is accepted ($n)"
+ret=0
+nextpartreset ns3/named.run
+wait_for_transfer verify-csk
+$DIG $DIGOPTS @10.53.0.3 +norec verify-csk SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null && ret=1
+grep "${ORIGINAL_SERIAL}.*; serial" dig.out.ns3.test$n > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-csk.*mirror zone is now in use" > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that an AXFR of an incorrectly signed mirror zone is rejected ($n)"
+ret=0
+nextpartreset ns3/named.run
+wait_for_transfer verify-axfr
+$DIG $DIGOPTS @10.53.0.3 +norec verify-axfr SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null || ret=1
+grep "${UPDATED_SERIAL_BAD}.*; serial" dig.out.ns3.test$n > /dev/null && ret=1
+nextpartpeek ns3/named.run | grep "No correct ${DEFAULT_ALGORITHM} signature for verify-axfr SOA" > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-axfr.*mirror zone is now in use" > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that an AXFR of an updated, correctly signed mirror zone is accepted ($n)"
+ret=0
+nextpart ns3/named.run > /dev/null
+cat ns2/verify-axfr.db.good.signed > ns2/verify-axfr.db.signed
+reload_zone verify-axfr ${UPDATED_SERIAL_GOOD}
+$RNDCCMD 10.53.0.3 retransfer verify-axfr > /dev/null 2>&1
+wait_for_transfer verify-axfr
+$DIG $DIGOPTS @10.53.0.3 +norec verify-axfr SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null && ret=1
+grep "${UPDATED_SERIAL_GOOD}.*; serial" dig.out.ns3.test$n > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-axfr.*mirror zone is now in use" > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that an IXFR of an incorrectly signed mirror zone is rejected ($n)"
+nextpartreset ns3/named.run
+ret=0
+wait_for_transfer verify-ixfr
+# Sanity check: the initial, properly signed version of the zone should have
+# been announced as coming into effect.
+nextpart ns3/named.run | grep "verify-ixfr.*mirror zone is now in use" > /dev/null || ret=1
+# Make a copy of the original zone file for reuse in journal tests below.
+cp ns2/verify-ixfr.db.signed ns3/verify-journal.db.mirror
+# Wait 1 second so that the zone file timestamp changes and the subsequent
+# invocation of "rndc reload" triggers a zone reload.
+sleep 1
+cat ns2/verify-ixfr.db.bad.signed > ns2/verify-ixfr.db.signed
+reload_zone verify-ixfr ${UPDATED_SERIAL_BAD}
+# Make a copy of the bad zone journal for reuse in journal tests below.
+cp ns2/verify-ixfr.db.signed.jnl ns3/verify-journal.db.bad.mirror.jnl
+# Trigger IXFR.
+$RNDCCMD 10.53.0.3 refresh verify-ixfr > /dev/null 2>&1
+wait_for_transfer verify-ixfr
+# Ensure the transfer was incremental as expected.
+if [ $(nextpartpeek ns3/named.run | grep "verify-ixfr.*got incremental response" | wc -l) -eq 0 ]; then
+	echo_i "failed: did not get an incremental response"
+	ret=1
+fi
+# Ensure the new, bad version of the zone was not accepted.
+$DIG $DIGOPTS @10.53.0.3 +norec verify-ixfr SOA > dig.out.ns3.test$n 2>&1 || ret=1
+# A positive answer is expected as the original version of the "verify-ixfr"
+# zone should have been successfully verified.
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null && ret=1
+grep "${UPDATED_SERIAL_BAD}.*; serial" dig.out.ns3.test$n > /dev/null && ret=1
+nextpartpeek ns3/named.run | grep "No correct ${DEFAULT_ALGORITHM} signature for verify-ixfr SOA" > /dev/null || ret=1
+# Despite the verification failure for this IXFR, this mirror zone should still
+# be in use as its previous version should have been verified successfully.
+nextpartpeek ns3/named.run | grep "verify-ixfr.*mirror zone is no longer in use" > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that an IXFR of an updated, correctly signed mirror zone is accepted after AXFR failover ($n)"
+ret=0
+nextpart ns3/named.run > /dev/null
+# Wait 1 second so that the zone file timestamp changes and the subsequent
+# invocation of "rndc reload" triggers a zone reload.
+sleep 1
+cat ns2/verify-ixfr.db.good.signed > ns2/verify-ixfr.db.signed
+reload_zone verify-ixfr ${UPDATED_SERIAL_GOOD}
+# Make a copy of the good zone journal for reuse in journal tests below.
+cp ns2/verify-ixfr.db.signed.jnl ns3/verify-journal.db.good.mirror.jnl
+# Trigger IXFR.
+$RNDCCMD 10.53.0.3 refresh verify-ixfr > /dev/null 2>&1
+wait_for_transfer verify-ixfr
+# Ensure the new, good version of the zone was accepted.
+$DIG $DIGOPTS @10.53.0.3 +norec verify-ixfr SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null && ret=1
+grep "${UPDATED_SERIAL_GOOD}.*; serial" dig.out.ns3.test$n > /dev/null || ret=1
+# The log message announcing the mirror zone coming into effect should not have
+# been logged this time since the mirror zone in question is expected to
+# already be in use before this test case is checked.
+nextpartpeek ns3/named.run | grep "verify-ixfr.*mirror zone is now in use" > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that loading an incorrectly signed mirror zone from disk fails ($n)"
+ret=0
+nextpartreset ns3/named.run
+wait_for_load verify-load ${UPDATED_SERIAL_BAD} ns3/named.run
+$DIG $DIGOPTS @10.53.0.3 +norec verify-load SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null || ret=1
+grep "${UPDATED_SERIAL_BAD}.*; serial" dig.out.ns3.test$n > /dev/null && ret=1
+nextpartpeek ns3/named.run | grep "No correct ${DEFAULT_ALGORITHM} signature for verify-load SOA" > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-load.*mirror zone is now in use" > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "ensuring trust anchor telemetry queries are sent upstream for a mirror zone ($n)"
+ret=0
+# ns3 is started with "-T tat=3", so TAT queries should have already been sent.
+grep "_ta-[-0-9a-f]*/NULL" ns1/named.run > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that loading a correctly signed mirror zone from disk succeeds ($n)"
+ret=0
+stop_server --use-rndc --port ${CONTROLPORT} ns3
+cat ns2/verify-load.db.good.signed > ns3/verify-load.db.mirror
+nextpart ns3/named.run > /dev/null
+start_server --noclean --restart --port ${PORT} ns3
+wait_for_load verify-load ${UPDATED_SERIAL_GOOD} ns3/named.run
+$DIG $DIGOPTS @10.53.0.3 +norec verify-load SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null && ret=1
+grep "${UPDATED_SERIAL_GOOD}.*; serial" dig.out.ns3.test$n > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-load.*mirror zone is now in use" > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that loading a journal for an incorrectly signed mirror zone fails ($n)"
+ret=0
+stop_server --use-rndc --port ${CONTROLPORT} ns3
+cp ns3/verify-journal.db.mirror ns3/verify-ixfr.db.mirror
+cp ns3/verify-journal.db.bad.mirror.jnl ns3/verify-ixfr.db.mirror.jnl
+# Temporarily disable transfers of the "verify-ixfr" zone on ns2.  This is
+# required to reliably test whether the message announcing the mirror zone
+# coming into effect is not logged after a failed journal verification since
+# otherwise a corrected version of the zone may be transferred after
+# verification fails but before we look for the aforementioned log message.
+# (NOTE: Keep the embedded newline in the sed function list below.)
+sed '/^zone "verify-ixfr" {$/,/^};$/ {
+	s/10.53.0.3/10.53.0.254/
+}' ns2/named.conf > ns2/named.conf.modified
+mv ns2/named.conf.modified ns2/named.conf
+rndc_reconfig ns2 10.53.0.2
+nextpart ns3/named.run > /dev/null
+start_server --noclean --restart --port ${PORT} ns3
+wait_for_load verify-ixfr ${UPDATED_SERIAL_BAD} ns3/named.run
+$DIG $DIGOPTS @10.53.0.3 +norec verify-ixfr SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null || ret=1
+grep "${UPDATED_SERIAL_BAD}.*; serial" dig.out.ns3.test$n > /dev/null && ret=1
+nextpartpeek ns3/named.run | grep "No correct ${DEFAULT_ALGORITHM} signature for verify-ixfr SOA" > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-ixfr.*mirror zone is now in use" > /dev/null && ret=1
+# Restore transfers for the "verify-ixfr" zone on ns2.
+# (NOTE: Keep the embedded newline in the sed function list below.)
+sed '/^zone "verify-ixfr" {$/,/^};$/ {
+	s/10.53.0.254/10.53.0.3/
+}' ns2/named.conf > ns2/named.conf.modified
+mv ns2/named.conf.modified ns2/named.conf
+rndc_reconfig ns2 10.53.0.2
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that loading a journal for a correctly signed mirror zone succeeds ($n)"
+ret=0
+stop_server --use-rndc --port ${CONTROLPORT} ns3
+cp ns3/verify-journal.db.mirror ns3/verify-ixfr.db.mirror
+cp ns3/verify-journal.db.good.mirror.jnl ns3/verify-ixfr.db.mirror.jnl
+nextpart ns3/named.run > /dev/null
+start_server --noclean --restart --port ${PORT} ns3
+wait_for_load verify-ixfr ${UPDATED_SERIAL_GOOD} ns3/named.run
+$DIG $DIGOPTS @10.53.0.3 +norec verify-ixfr SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null && ret=1
+grep "${UPDATED_SERIAL_GOOD}.*; serial" dig.out.ns3.test$n > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "verify-ixfr.*mirror zone is now in use" > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking delegations sourced from a mirror zone ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 foo.example A +norec > dig.out.ns3.test$n 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null && ret=1
+# Check that a delegation containing a DS RRset and glue is present.
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null || ret=1
+grep "example.*IN.*NS" dig.out.ns3.test$n > /dev/null || ret=1
+grep "example.*IN.*DS" dig.out.ns3.test$n > /dev/null || ret=1
+grep "ns2.example.*A.*10.53.0.2" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that resolution involving a mirror zone works as expected ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 foo.example A > dig.out.ns3.test$n 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null || ret=1
+# Ensure ns1 was not queried.
+grep "query 'foo.example/A/IN'" ns1/named.run > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that non-recursive queries for names below mirror zone get responded from cache ($n)"
+ret=0
+# Issue a non-recursive query for an RRset which is expected to be in cache.
+$DIG $DIGOPTS @10.53.0.3 +norec foo.example. A > dig.out.ns3.test$n 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null || ret=1
+# Ensure the response is not a delegation.
+grep "ANSWER: 0" dig.out.ns3.test$n > /dev/null && ret=1
+grep "foo.example.*IN.*A.*127.0.0.1" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that delegations from cache which improve mirror zone delegations are properly handled ($n)"
+ret=0
+# First, issue a recursive query in order to cache an RRset which is not within
+# the mirror zone's bailiwick.
+$DIG $DIGOPTS @10.53.0.3 sub.example. NS > dig.out.ns3.test$n.1 2>&1 || ret=1
+# Ensure the child-side NS RRset is returned.
+grep "NOERROR" dig.out.ns3.test$n.1 > /dev/null || ret=1
+grep "ANSWER: 2" dig.out.ns3.test$n.1 > /dev/null || ret=1
+grep "sub.example.*IN.*NS" dig.out.ns3.test$n.1 > /dev/null || ret=1
+# Issue a non-recursive query for something below the cached zone cut.
+$DIG $DIGOPTS @10.53.0.3 +norec foo.sub.example. A > dig.out.ns3.test$n.2 2>&1 || ret=1
+# Ensure the cached NS RRset is returned in a delegation, along with the
+# parent-side DS RRset.
+grep "NOERROR" dig.out.ns3.test$n.2 > /dev/null || ret=1
+grep "ANSWER: 0" dig.out.ns3.test$n.2 > /dev/null || ret=1
+grep "sub.example.*IN.*NS" dig.out.ns3.test$n.2 > /dev/null || ret=1
+grep "sub.example.*IN.*DS" dig.out.ns3.test$n.2 > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking flags set in a DNSKEY response sourced from a mirror zone ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 . DNSKEY > dig.out.ns3.test$n 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* aa" dig.out.ns3.test$n > /dev/null && ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking flags set in a SOA response sourced from a mirror zone ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 . SOA > dig.out.ns3.test$n 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* aa" dig.out.ns3.test$n > /dev/null && ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that resolution succeeds with unavailable mirror zone data ($n)"
+ret=0
+wait_for_transfer initially-unavailable
+# Query for a record in a zone that is set up to be mirrored, but
+# untransferrable from the configured primary.  Resolution should still succeed.
+$DIG $DIGOPTS @10.53.0.3 foo.initially-unavailable. A > dig.out.ns3.test$n.1 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n.1 > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n.1 > /dev/null || ret=1
+# Sanity check: the authoritative server should have been queried.
+nextpart ns2/named.run | grep "query 'foo.initially-unavailable/A/IN'" > /dev/null || ret=1
+# Reconfigure ns2 so that the zone can be mirrored on ns3.
+sed '/^zone "initially-unavailable" {$/,/^};$/ {
+	s/10.53.0.254/10.53.0.3/
+}' ns2/named.conf > ns2/named.conf.modified
+mv ns2/named.conf.modified ns2/named.conf
+rndc_reconfig ns2 10.53.0.2
+# Flush the cache on ns3 and retransfer the mirror zone.
+$RNDCCMD 10.53.0.3 flush > /dev/null 2>&1
+nextpart ns3/named.run > /dev/null
+$RNDCCMD 10.53.0.3 retransfer initially-unavailable > /dev/null 2>&1
+wait_for_transfer initially-unavailable
+# Query for the same record again.  Resolution should still succeed.
+$DIG $DIGOPTS @10.53.0.3 foo.initially-unavailable. A > dig.out.ns3.test$n.2 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n.2 > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n.2 > /dev/null || ret=1
+# Ensure the authoritative server was not queried.
+nextpart ns2/named.run | grep "query 'foo.initially-unavailable/A/IN'" > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that resolution succeeds with expired mirror zone data ($n)"
+ret=0
+# Reconfigure ns2 so that the zone from the previous test can no longer be
+# mirrored on ns3.
+sed '/^zone "initially-unavailable" {$/,/^};$/ {
+	s/10.53.0.3/10.53.0.254/
+}' ns2/named.conf > ns2/named.conf.modified
+mv ns2/named.conf.modified ns2/named.conf
+rndc_reconfig ns2 10.53.0.2
+# Stop ns3, update the timestamp of the zone file to one far in the past, then
+# restart ns3.
+stop_server --use-rndc --port ${CONTROLPORT} ns3
+touch -t 200001010000 ns3/initially-unavailable.db.mirror
+nextpart ns3/named.run > /dev/null
+start_server --noclean --restart --port ${PORT} ns3
+# Ensure named attempts to retransfer the zone due to its expiry.
+wait_for_transfer initially-unavailable
+# Ensure the expected messages were logged.
+nextpartpeek ns3/named.run | grep "initially-unavailable.*expired" > /dev/null || ret=1
+nextpartpeek ns3/named.run | grep "initially-unavailable.*mirror zone is no longer in use" > /dev/null || ret=1
+# Query for a record in the expired zone.  Resolution should still succeed.
+$DIG $DIGOPTS @10.53.0.3 foo.initially-unavailable. A > dig.out.ns3.test$n 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null || ret=1
+# Sanity check: the authoritative server should have been queried.
+nextpart ns2/named.run | grep "query 'foo.initially-unavailable/A/IN'" > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that clients without cache access cannot retrieve mirror zone data ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 -b 10.53.0.3 +norec . SOA > dig.out.ns3.test$n 2>&1 || ret=1
+# Check response code and flags in the answer.
+grep "REFUSED" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that outgoing transfers of mirror zones are disabled by default ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 . AXFR > dig.out.ns3.test$n 2>&1 || ret=1
+grep "; Transfer failed" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that notifies are disabled by default for mirror zones ($n)"
+ret=0
+grep "initially-unavailable.*sending notifies" ns3/named.run > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking output of \"rndc zonestatus\" for a mirror zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 zonestatus . > rndc.out.ns3.test$n 2>&1
+grep "type: mirror" rndc.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that \"rndc reconfig\" properly handles a mirror -> secondary zone type change ($n)"
+ret=0
+# Sanity check before we start.
+$DIG $DIGOPTS @10.53.0.3 +norec verify-reconfig SOA > dig.out.ns3.test$n.1 2>&1 || ret=1
+grep "NOERROR" dig.out.ns3.test$n.1 > /dev/null || ret=1
+grep "flags:.* aa" dig.out.ns3.test$n.1 > /dev/null && ret=1
+grep "flags:.* ad" dig.out.ns3.test$n.1 > /dev/null || ret=1
+# Reconfigure the zone so that it is no longer a mirror zone.
+# (NOTE: Keep the embedded newline in the sed function list below.)
+sed '/^zone "verify-reconfig" {$/,/^};$/ {
+	s/type mirror;/type secondary;/
+}' ns3/named.conf > ns3/named.conf.modified
+mv ns3/named.conf.modified ns3/named.conf
+nextpart ns3/named.run > /dev/null
+rndc_reconfig ns3 10.53.0.3
+# Zones whose type was changed should not be reusable, which means the tested
+# zone should have been reloaded from disk.
+wait_for_load verify-reconfig ${ORIGINAL_SERIAL} ns3/named.run
+# Ensure responses sourced from the reconfigured zone have AA=1 and AD=0.
+$DIG $DIGOPTS @10.53.0.3 +norec verify-reconfig SOA > dig.out.ns3.test$n.2 2>&1 || ret=1
+grep "NOERROR" dig.out.ns3.test$n.2 > /dev/null || ret=1
+grep "flags:.* aa" dig.out.ns3.test$n.2 > /dev/null || ret=1
+grep "flags:.* ad" dig.out.ns3.test$n.2 > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that \"rndc reconfig\" properly handles a secondary -> mirror zone type change ($n)"
+ret=0
+# Put an incorrectly signed version of the zone in the zone file used by ns3.
+nextpart ns3/named.run > /dev/null
+cat ns2/verify-reconfig.db.bad.signed > ns3/verify-reconfig.db.mirror
+# Reconfigure the zone so that it is a mirror zone again.
+# (NOTE: Keep the embedded newline in the sed function list below.)
+sed '/^zone "verify-reconfig" {$/,/^};$/ {
+	s/type secondary;/type mirror;/
+}' ns3/named.conf > ns3/named.conf.modified
+mv ns3/named.conf.modified ns3/named.conf
+rndc_reconfig ns3 10.53.0.3
+# The reconfigured zone should fail verification.
+wait_for_load verify-reconfig ${UPDATED_SERIAL_BAD} ns3/named.run
+$DIG $DIGOPTS @10.53.0.3 +norec verify-reconfig SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "${UPDATED_SERIAL_BAD}.*; serial" dig.out.ns3.test$n > /dev/null && ret=1
+nextpart ns3/named.run | grep "No correct ${DEFAULT_ALGORITHM} signature for verify-reconfig SOA" > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that a mirror zone can be added using rndc ($n)"
+ret=0
+# Sanity check: the zone should not exist in the root zone.
+$DIG $DIGOPTS @10.53.0.3 +norec verify-addzone SOA > dig.out.ns3.test$n.1 2>&1 || ret=1
+grep "NXDOMAIN" dig.out.ns3.test$n.1 > /dev/null || ret=1
+grep "flags:.* aa" dig.out.ns3.test$n.1 > /dev/null && ret=1
+grep "flags:.* ad" dig.out.ns3.test$n.1 > /dev/null || ret=1
+# Mirror a zone which does not exist in the root zone.
+nextpart ns3/named.run > /dev/null
+$RNDCCMD 10.53.0.3 addzone verify-addzone '{ type mirror; primaries { 10.53.0.2; }; };' > rndc.out.ns3.test$n 2>&1 || ret=1
+wait_for_transfer verify-addzone
+# Check whether the mirror zone was added and whether it behaves as expected.
+$DIG $DIGOPTS @10.53.0.3 +norec verify-addzone SOA > dig.out.ns3.test$n.2 2>&1 || ret=1
+grep "NOERROR" dig.out.ns3.test$n.2 > /dev/null || ret=1
+grep "flags:.* aa" dig.out.ns3.test$n.2 > /dev/null && ret=1
+grep "flags:.* ad" dig.out.ns3.test$n.2 > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that a mirror zone can be deleted using rndc ($n)"
+ret=0
+# Remove the mirror zone added in the previous test.
+nextpart ns3/named.run > /dev/null
+$RNDCCMD 10.53.0.3 delzone verify-addzone > rndc.out.ns3.test$n 2>&1 || ret=1
+wait_for_log 20 "zone verify-addzone/IN: mirror zone is no longer in use; reverting to normal recursion" ns3/named.run || ret=1
+# Check whether the mirror zone was removed.
+$DIG $DIGOPTS @10.53.0.3 +norec verify-addzone SOA > dig.out.ns3.test$n 2>&1 || ret=1
+grep "NXDOMAIN" dig.out.ns3.test$n > /dev/null || ret=1
+grep "flags:.* aa" dig.out.ns3.test$n > /dev/null && ret=1
+grep "flags:.* ad" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1
-- 
cgit v1.2.3