Adding upstream version 115.7.0esr.upstream/115.7.0esr

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 503 insertions, 0 deletions

diff --git a/other-licenses/snappy/src/snappy-test.cc b/other-licenses/snappy/src/snappy-test.cc
new file mode 100644
index 0000000000..7eb490ac17
--- /dev/null
+++ b/other-licenses/snappy/src/snappy-test.cc
@@ -0,0 +1,503 @@
+// Copyright 2011 Google Inc. All Rights Reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+// Various stubs for the unit tests for the open-source version of Snappy.
+
+#include "snappy-test.h"
+
+#include <algorithm>
+#include <cstdarg>
+#include <cstdio>
+#include <cstdlib>
+#include <iostream>
+#include <string>
+
+namespace file {
+
+OptionsStub::OptionsStub() = default;
+OptionsStub::~OptionsStub() = default;
+
+const OptionsStub &Defaults() {
+  static OptionsStub defaults;
+  return defaults;
+}
+
+StatusStub::StatusStub() = default;
+StatusStub::StatusStub(const StatusStub &) = default;
+StatusStub &StatusStub::operator=(const StatusStub &) = default;
+StatusStub::~StatusStub() = default;
+
+bool StatusStub::ok() { return true; }
+
+StatusStub GetContents(const std::string &filename, std::string *output,
+                       const OptionsStub & /* options */) {
+  std::FILE *fp = std::fopen(filename.c_str(), "rb");
+  if (fp == nullptr) {
+    std::perror(filename.c_str());
+    std::exit(1);
+  }
+
+  output->clear();
+  while (!std::feof(fp)) {
+    char buffer[4096];
+    size_t bytes_read = std::fread(buffer, 1, sizeof(buffer), fp);
+    if (bytes_read == 0 && std::ferror(fp)) {
+      std::perror("fread");
+      std::exit(1);
+    }
+    output->append(buffer, bytes_read);
+  }
+
+  std::fclose(fp);
+  return StatusStub();
+}
+
+StatusStub SetContents(const std::string &file_name, const std::string &content,
+                       const OptionsStub & /* options */) {
+  std::FILE *fp = std::fopen(file_name.c_str(), "wb");
+  if (fp == nullptr) {
+    std::perror(file_name.c_str());
+    std::exit(1);
+  }
+
+  size_t bytes_written = std::fwrite(content.data(), 1, content.size(), fp);
+  if (bytes_written != content.size()) {
+    std::perror("fwrite");
+    std::exit(1);
+  }
+
+  std::fclose(fp);
+  return StatusStub();
+}
+
+}  // namespace file
+
+namespace snappy {
+
+std::string ReadTestDataFile(const std::string& base, size_t size_limit) {
+  std::string contents;
+  const char* srcdir = getenv("srcdir");  // This is set by Automake.
+  std::string prefix;
+  if (srcdir) {
+    prefix = std::string(srcdir) + "/";
+  }
+  file::GetContents(prefix + "testdata/" + base, &contents, file::Defaults()
+      ).ok();
+  if (size_limit > 0) {
+    contents = contents.substr(0, size_limit);
+  }
+  return contents;
+}
+
+std::string StrFormat(const char* format, ...) {
+  char buffer[4096];
+  std::va_list ap;
+  va_start(ap, format);
+  std::vsnprintf(buffer, sizeof(buffer), format, ap);
+  va_end(ap);
+  return buffer;
+}
+
+LogMessage::~LogMessage() { std::cerr << std::endl; }
+
+LogMessage &LogMessage::operator<<(const std::string &message) {
+  std::cerr << message;
+  return *this;
+}
+
+LogMessage &LogMessage::operator<<(int number) {
+  std::cerr << number;
+  return *this;
+}
+
+#ifdef _MSC_VER
+// ~LogMessageCrash calls std::abort() and therefore never exits. This is by
+// design, so temporarily disable warning C4722.
+#pragma warning(push)
+#pragma warning(disable : 4722)
+#endif
+
+LogMessageCrash::~LogMessageCrash() {
+  std::cerr << std::endl;
+  std::abort();
+}
+
+#ifdef _MSC_VER
+#pragma warning(pop)
+#endif
+
+#ifdef HAVE_LIBZ
+
+ZLib::ZLib()
+    : comp_init_(false),
+      uncomp_init_(false) {
+  Reinit();
+}
+
+ZLib::~ZLib() {
+  if (comp_init_)   { deflateEnd(&comp_stream_); }
+  if (uncomp_init_) { inflateEnd(&uncomp_stream_); }
+}
+
+void ZLib::Reinit() {
+  compression_level_ = Z_DEFAULT_COMPRESSION;
+  window_bits_ = MAX_WBITS;
+  mem_level_ =  8;  // DEF_MEM_LEVEL
+  if (comp_init_) {
+    deflateEnd(&comp_stream_);
+    comp_init_ = false;
+  }
+  if (uncomp_init_) {
+    inflateEnd(&uncomp_stream_);
+    uncomp_init_ = false;
+  }
+  first_chunk_ = true;
+}
+
+void ZLib::Reset() {
+  first_chunk_ = true;
+}
+
+// --------- COMPRESS MODE
+
+// Initialization method to be called if we hit an error while
+// compressing. On hitting an error, call this method before returning
+// the error.
+void ZLib::CompressErrorInit() {
+  deflateEnd(&comp_stream_);
+  comp_init_ = false;
+  Reset();
+}
+
+int ZLib::DeflateInit() {
+  return deflateInit2(&comp_stream_,
+                      compression_level_,
+                      Z_DEFLATED,
+                      window_bits_,
+                      mem_level_,
+                      Z_DEFAULT_STRATEGY);
+}
+
+int ZLib::CompressInit(Bytef *dest, uLongf *destLen,
+                       const Bytef *source, uLong *sourceLen) {
+  int err;
+
+  comp_stream_.next_in = (Bytef*)source;
+  comp_stream_.avail_in = (uInt)*sourceLen;
+  if ((uLong)comp_stream_.avail_in != *sourceLen) return Z_BUF_ERROR;
+  comp_stream_.next_out = dest;
+  comp_stream_.avail_out = (uInt)*destLen;
+  if ((uLong)comp_stream_.avail_out != *destLen) return Z_BUF_ERROR;
+
+  if ( !first_chunk_ )   // only need to set up stream the first time through
+    return Z_OK;
+
+  if (comp_init_) {      // we've already initted it
+    err = deflateReset(&comp_stream_);
+    if (err != Z_OK) {
+      LOG(WARNING) << "ERROR: Can't reset compress object; creating a new one";
+      deflateEnd(&comp_stream_);
+      comp_init_ = false;
+    }
+  }
+  if (!comp_init_) {     // first use
+    comp_stream_.zalloc = (alloc_func)0;
+    comp_stream_.zfree = (free_func)0;
+    comp_stream_.opaque = (voidpf)0;
+    err = DeflateInit();
+    if (err != Z_OK) return err;
+    comp_init_ = true;
+  }
+  return Z_OK;
+}
+
+// In a perfect world we'd always have the full buffer to compress
+// when the time came, and we could just call Compress().  Alas, we
+// want to do chunked compression on our webserver.  In this
+// application, we compress the header, send it off, then compress the
+// results, send them off, then compress the footer.  Thus we need to
+// use the chunked compression features of zlib.
+int ZLib::CompressAtMostOrAll(Bytef *dest, uLongf *destLen,
+                              const Bytef *source, uLong *sourceLen,
+                              int flush_mode) {   // Z_FULL_FLUSH or Z_FINISH
+  int err;
+
+  if ( (err=CompressInit(dest, destLen, source, sourceLen)) != Z_OK )
+    return err;
+
+  // This is used to figure out how many bytes we wrote *this chunk*
+  int compressed_size = comp_stream_.total_out;
+
+  // Some setup happens only for the first chunk we compress in a run
+  if ( first_chunk_ ) {
+    first_chunk_ = false;
+  }
+
+  // flush_mode is Z_FINISH for all mode, Z_SYNC_FLUSH for incremental
+  // compression.
+  err = deflate(&comp_stream_, flush_mode);
+
+  *sourceLen = comp_stream_.avail_in;
+
+  if ((err == Z_STREAM_END || err == Z_OK)
+      && comp_stream_.avail_in == 0
+      && comp_stream_.avail_out != 0 ) {
+    // we processed everything ok and the output buffer was large enough.
+    ;
+  } else if (err == Z_STREAM_END && comp_stream_.avail_in > 0) {
+    return Z_BUF_ERROR;                            // should never happen
+  } else if (err != Z_OK && err != Z_STREAM_END && err != Z_BUF_ERROR) {
+    // an error happened
+    CompressErrorInit();
+    return err;
+  } else if (comp_stream_.avail_out == 0) {     // not enough space
+    err = Z_BUF_ERROR;
+  }
+
+  assert(err == Z_OK || err == Z_STREAM_END || err == Z_BUF_ERROR);
+  if (err == Z_STREAM_END)
+    err = Z_OK;
+
+  // update the crc and other metadata
+  compressed_size = comp_stream_.total_out - compressed_size;  // delta
+  *destLen = compressed_size;
+
+  return err;
+}
+
+int ZLib::CompressChunkOrAll(Bytef *dest, uLongf *destLen,
+                             const Bytef *source, uLong sourceLen,
+                             int flush_mode) {   // Z_FULL_FLUSH or Z_FINISH
+  const int ret =
+    CompressAtMostOrAll(dest, destLen, source, &sourceLen, flush_mode);
+  if (ret == Z_BUF_ERROR)
+    CompressErrorInit();
+  return ret;
+}
+
+// This routine only initializes the compression stream once.  Thereafter, it
+// just does a deflateReset on the stream, which should be faster.
+int ZLib::Compress(Bytef *dest, uLongf *destLen,
+                   const Bytef *source, uLong sourceLen) {
+  int err;
+  if ( (err=CompressChunkOrAll(dest, destLen, source, sourceLen,
+                               Z_FINISH)) != Z_OK )
+    return err;
+  Reset();         // reset for next call to Compress
+
+  return Z_OK;
+}
+
+
+// --------- UNCOMPRESS MODE
+
+int ZLib::InflateInit() {
+  return inflateInit2(&uncomp_stream_, MAX_WBITS);
+}
+
+// Initialization method to be called if we hit an error while
+// uncompressing. On hitting an error, call this method before
+// returning the error.
+void ZLib::UncompressErrorInit() {
+  inflateEnd(&uncomp_stream_);
+  uncomp_init_ = false;
+  Reset();
+}
+
+int ZLib::UncompressInit(Bytef *dest, uLongf *destLen,
+                         const Bytef *source, uLong *sourceLen) {
+  int err;
+
+  uncomp_stream_.next_in = (Bytef*)source;
+  uncomp_stream_.avail_in = (uInt)*sourceLen;
+  // Check for source > 64K on 16-bit machine:
+  if ((uLong)uncomp_stream_.avail_in != *sourceLen) return Z_BUF_ERROR;
+
+  uncomp_stream_.next_out = dest;
+  uncomp_stream_.avail_out = (uInt)*destLen;
+  if ((uLong)uncomp_stream_.avail_out != *destLen) return Z_BUF_ERROR;
+
+  if ( !first_chunk_ )   // only need to set up stream the first time through
+    return Z_OK;
+
+  if (uncomp_init_) {    // we've already initted it
+    err = inflateReset(&uncomp_stream_);
+    if (err != Z_OK) {
+      LOG(WARNING)
+        << "ERROR: Can't reset uncompress object; creating a new one";
+      UncompressErrorInit();
+    }
+  }
+  if (!uncomp_init_) {
+    uncomp_stream_.zalloc = (alloc_func)0;
+    uncomp_stream_.zfree = (free_func)0;
+    uncomp_stream_.opaque = (voidpf)0;
+    err = InflateInit();
+    if (err != Z_OK) return err;
+    uncomp_init_ = true;
+  }
+  return Z_OK;
+}
+
+// If you compressed your data a chunk at a time, with CompressChunk,
+// you can uncompress it a chunk at a time with UncompressChunk.
+// Only difference bewteen chunked and unchunked uncompression
+// is the flush mode we use: Z_SYNC_FLUSH (chunked) or Z_FINISH (unchunked).
+int ZLib::UncompressAtMostOrAll(Bytef *dest, uLongf *destLen,
+                                const Bytef *source, uLong *sourceLen,
+                                int flush_mode) {  // Z_SYNC_FLUSH or Z_FINISH
+  int err = Z_OK;
+
+  if ( (err=UncompressInit(dest, destLen, source, sourceLen)) != Z_OK ) {
+    LOG(WARNING) << "UncompressInit: Error: " << err << " SourceLen: "
+                 << *sourceLen;
+    return err;
+  }
+
+  // This is used to figure out how many output bytes we wrote *this chunk*:
+  const uLong old_total_out = uncomp_stream_.total_out;
+
+  // This is used to figure out how many input bytes we read *this chunk*:
+  const uLong old_total_in = uncomp_stream_.total_in;
+
+  // Some setup happens only for the first chunk we compress in a run
+  if ( first_chunk_ ) {
+    first_chunk_ = false;                          // so we don't do this again
+
+    // For the first chunk *only* (to avoid infinite troubles), we let
+    // there be no actual data to uncompress.  This sometimes triggers
+    // when the input is only the gzip header, say.
+    if ( *sourceLen == 0 ) {
+      *destLen = 0;
+      return Z_OK;
+    }
+  }
+
+  // We'll uncompress as much as we can.  If we end OK great, otherwise
+  // if we get an error that seems to be the gzip footer, we store the
+  // gzip footer and return OK, otherwise we return the error.
+
+  // flush_mode is Z_SYNC_FLUSH for chunked mode, Z_FINISH for all mode.
+  err = inflate(&uncomp_stream_, flush_mode);
+
+  // Figure out how many bytes of the input zlib slurped up:
+  const uLong bytes_read = uncomp_stream_.total_in - old_total_in;
+  CHECK_LE(source + bytes_read, source + *sourceLen);
+  *sourceLen = uncomp_stream_.avail_in;
+
+  if ((err == Z_STREAM_END || err == Z_OK)  // everything went ok
+             && uncomp_stream_.avail_in == 0) {    // and we read it all
+    ;
+  } else if (err == Z_STREAM_END && uncomp_stream_.avail_in > 0) {
+    LOG(WARNING)
+      << "UncompressChunkOrAll: Received some extra data, bytes total: "
+      << uncomp_stream_.avail_in << " bytes: "
+      << std::string(reinterpret_cast<const char *>(uncomp_stream_.next_in),
+                     std::min(int(uncomp_stream_.avail_in), 20));
+    UncompressErrorInit();
+    return Z_DATA_ERROR;       // what's the extra data for?
+  } else if (err != Z_OK && err != Z_STREAM_END && err != Z_BUF_ERROR) {
+    // an error happened
+    LOG(WARNING) << "UncompressChunkOrAll: Error: " << err
+                 << " avail_out: " << uncomp_stream_.avail_out;
+    UncompressErrorInit();
+    return err;
+  } else if (uncomp_stream_.avail_out == 0) {
+    err = Z_BUF_ERROR;
+  }
+
+  assert(err == Z_OK || err == Z_BUF_ERROR || err == Z_STREAM_END);
+  if (err == Z_STREAM_END)
+    err = Z_OK;
+
+  *destLen = uncomp_stream_.total_out - old_total_out;  // size for this call
+
+  return err;
+}
+
+int ZLib::UncompressChunkOrAll(Bytef *dest, uLongf *destLen,
+                               const Bytef *source, uLong sourceLen,
+                               int flush_mode) {  // Z_SYNC_FLUSH or Z_FINISH
+  const int ret =
+    UncompressAtMostOrAll(dest, destLen, source, &sourceLen, flush_mode);
+  if (ret == Z_BUF_ERROR)
+    UncompressErrorInit();
+  return ret;
+}
+
+int ZLib::UncompressAtMost(Bytef *dest, uLongf *destLen,
+                          const Bytef *source, uLong *sourceLen) {
+  return UncompressAtMostOrAll(dest, destLen, source, sourceLen, Z_SYNC_FLUSH);
+}
+
+// We make sure we've uncompressed everything, that is, the current
+// uncompress stream is at a compressed-buffer-EOF boundary.  In gzip
+// mode, we also check the gzip footer to make sure we pass the gzip
+// consistency checks.  We RETURN true iff both types of checks pass.
+bool ZLib::UncompressChunkDone() {
+  assert(!first_chunk_ && uncomp_init_);
+  // Make sure we're at the end-of-compressed-data point.  This means
+  // if we call inflate with Z_FINISH we won't consume any input or
+  // write any output
+  Bytef dummyin, dummyout;
+  uLongf dummylen = 0;
+  if ( UncompressChunkOrAll(&dummyout, &dummylen, &dummyin, 0, Z_FINISH)
+       != Z_OK ) {
+    return false;
+  }
+
+  // Make sure that when we exit, we can start a new round of chunks later
+  Reset();
+
+  return true;
+}
+
+// Uncompresses the source buffer into the destination buffer.
+// The destination buffer must be long enough to hold the entire
+// decompressed contents.
+//
+// We only initialize the uncomp_stream once.  Thereafter, we use
+// inflateReset, which should be faster.
+//
+// Returns Z_OK on success, otherwise, it returns a zlib error code.
+int ZLib::Uncompress(Bytef *dest, uLongf *destLen,
+                     const Bytef *source, uLong sourceLen) {
+  int err;
+  if ( (err=UncompressChunkOrAll(dest, destLen, source, sourceLen,
+                                 Z_FINISH)) != Z_OK ) {
+    Reset();                           // let us try to compress again
+    return err;
+  }
+  if ( !UncompressChunkDone() )        // calls Reset()
+    return Z_DATA_ERROR;
+  return Z_OK;  // stream_end is ok
+}
+
+#endif  // HAVE_LIBZ
+
+}  // namespace snappy