Adding upstream version 115.7.0esr.upstream/115.7.0esr

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 1458 insertions, 0 deletions

diff --git a/toolkit/crashreporter/google-breakpad/android/common-functions.sh b/toolkit/crashreporter/google-breakpad/android/common-functions.sh
new file mode 100755
index 0000000000..c00e34f997
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/common-functions.sh
@@ -0,0 +1,372 @@
+# Copyright (c) 2012 Google Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+#     * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+#     * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Collection of common shell functions for 'run-checks.sh' et 'test-shell.sh'
+
+# All internal variables and functions use an underscore as a prefix
+# (e.g. _VERBOSE, _ALL_CLEANUPS, etc..).
+
+# Sanitize the environment
+export LANG=C
+export LC_ALL=C
+
+if [ "$BASH_VERSION" ]; then
+  set -o posix
+fi
+
+# Utility functions
+
+_ALL_CLEANUPS=
+
+# Register a function to be called when the script exits, even in case of
+# Ctrl-C, logout, etc.
+# $1: function name.
+atexit () {
+  if [ -z "$_ALL_CLEANUPS" ]; then
+    _ALL_CLEANUPS=$1
+    # Ensure a clean exit when the script is:
+    #  - Exiting normally (EXIT)
+    #  - Interrupted by Ctrl-C (INT)
+    #  - Interrupted by log out (HUP)
+    #  - Being asked to quit nicely (TERM)
+    #  - Being asked to quit and dump core (QUIT)
+    trap "_exit_cleanups \$?" EXIT INT HUP QUIT TERM
+  else
+    _ALL_CLEANUPS="$_ALL_CLEANUPS $1"
+  fi
+}
+
+# Called on exit if at least one function was registered with atexit
+# $1: final exit status code
+_exit_cleanups () {
+  local CLEANUP CLEANUPS
+  # Ignore calls to atexit during cleanups
+  CLEANUPS=$_ALL_CLEANUPS
+  _ALL_CLEANUPS=
+  for CLEANUP in $CLEANUPS; do
+    ($CLEANUP)
+  done
+  exit "$@"
+}
+
+
+
+
+# Dump a panic message then exit.
+# $1+: message
+panic () {
+  echo "ERROR: $@" >&2
+  exit 1
+}
+
+# If the previous command failed, dump a panic message then exit.
+# $1+: message.
+fail_panic () {
+  if [ $? != 0 ]; then
+    panic "$@"
+  fi;
+}
+
+_VERBOSE=0
+
+# Increase verbosity for dump/log/run/run2 functions
+increase_verbosity () {
+  _VERBOSE=$(( $_VERBOSE + 1 ))
+}
+
+# Decrease verbosity
+decrease_verbosity () {
+  _VERBOSE=$(( $_VERBOSE - 1 ))
+}
+
+# Returns success iff verbosity level is higher than a specific value
+# $1: verbosity level
+verbosity_is_higher_than () {
+  [ "$_VERBOSE" -gt "$1" ]
+}
+
+# Returns success iff verbosity level is lower than a specific value
+# $1: verbosity level
+verbosity_is_lower_than () {
+  [ "$_VERBOSE" -le "$1" ]
+}
+
+# Dump message to stdout, unless verbosity is < 0, i.e. --quiet was called
+# $1+: message
+dump () {
+  if [ "$_VERBOSE" -ge 0 ]; then
+    printf "%s\n" "$*"
+  fi
+}
+
+# If --verbose was used, dump a message to stdout.
+# $1+: message
+log () {
+  if [ "$_VERBOSE" -ge 1 ]; then
+    printf "%s\n" "$*"
+  fi
+}
+
+_RUN_LOG=
+
+# Set a run log file that can be used to collect the output of commands that
+# are not displayed.
+set_run_log () {
+  _RUN_LOG=$1
+}
+
+# Run a command. Output depends on $_VERBOSE:
+#   $_VERBOSE <= 0:  Run command, store output into the run log
+#   $_VERBOSE >= 1:  Dump command, run it, output goest to stdout
+# Note: Ideally, the command's output would go to the run log for $_VERBOSE >= 1
+#       but the 'tee' tool doesn't preserve the status code of its input pipe
+#       in case of error.
+run () {
+  local LOGILE
+  if [ "$_RUN_LOG" ]; then
+    LOGFILE=$_RUN_LOG
+  else
+    LOGFILE=/dev/null
+  fi
+
+  if [ "$_VERBOSE" -ge 1 ]; then
+    echo "COMMAND: $@"
+    "$@"
+  else
+    "$@" >>$LOGFILE 2>&1
+  fi
+}
+
+# Same as run(), but only dump command output for $_VERBOSE >= 2
+run2 () {
+  local LOGILE
+  if [ "$_RUN_LOG" ]; then
+    LOGFILE=$_RUN_LOG
+  else
+    LOGFILE=/dev/null
+  fi
+
+  if [ "$_VERBOSE" -ge 1 ]; then
+    echo "COMMAND: $@"
+  fi
+  if [ "$_VERBOSE" -ge 2 ]; then
+    "$@"
+  else
+    "$@" >>$LOGFILE 2>&1
+  fi
+}
+
+# Extract number of cores to speed up the builds
+# Out: number of CPU cores
+get_core_count () {
+  case $(uname -s) in
+    Linux)
+      grep -c -e '^processor' /proc/cpuinfo
+      ;;
+    Darwin)
+      sysctl -n hw.ncpu
+      ;;
+    CYGWIN*|*_NT-*)
+      echo $NUMBER_OF_PROCESSORS
+      ;;
+    *)
+      echo 1
+      ;;
+  esac
+}
+
+
+# Check for the Android ADB program.
+#
+# On success, return nothing, but updates internal variables so later calls to
+# adb_shell, adb_push, etc.. will work. You can get the path to the ADB program
+# with adb_get_program if needed.
+#
+# On failure, returns 1, and updates the internal adb error message, which can
+# be retrieved with adb_get_error.
+#
+# $1: optional ADB program path.
+# Return: success or failure.
+_ADB=
+_ADB_STATUS=
+_ADB_ERROR=
+
+adb_check () {
+  # First, try to find the executable in the path, or the SDK install dir.
+  _ADB=$1
+  if [ -z "$_ADB" ]; then
+    _ADB=$(which adb 2>/dev/null)
+    if [ -z "$_ADB" -a "$ANDROID_SDK_ROOT" ]; then
+      _ADB=$ANDROID_SDK_ROOT/platform-tools/adb
+      if [ ! -f "$_ADB" ]; then
+        _ADB=
+      fi
+    fi
+    if [ -z "$_ADB" ]; then
+      _ADB_STATUS=1
+      _ADB_ERROR="The Android 'adb' tool is not in your path."
+      return 1
+    fi
+  fi
+
+  log "Found ADB program: $_ADB"
+
+  # Check that it works correctly
+  local ADB_VERSION
+  ADB_VERSION=$("$_ADB" version 2>/dev/null)
+  case $ADB_VERSION in
+    "Android Debug Bridge "*) # Pass
+      log "Found ADB version: $ADB_VERSION"
+      ;;
+    *) # Fail
+      _ADB_ERROR="Your ADB binary reports a bad version ($ADB_VERSION): $_ADB"
+      _ADB_STATUS=1
+      return 1
+  esac
+
+  _ADB_STATUS=0
+  return 0
+}
+
+
+# Return the path to the Android ADB program, if correctly detected.
+# On failure, return the empty string.
+# Out: ADB program path (or empty on failure)
+# Return: success or failure.
+adb_get_program () {
+  # Return cached value as soon as possible.
+  if [ -z "$_ADB_STATUS" ]; then
+    adb_check $1
+  fi
+  echo "$_ADB"
+  return $_ADB_STATUS
+}
+
+# Return the error corresponding to the last ADB function failure.
+adb_get_error () {
+  echo "$_ADB_ERROR"
+}
+
+# Check that there is one device connected through ADB.
+# In case of failure, use adb_get_error to know why this failed.
+# $1: Optional adb program path
+# Return: success or failure.
+_ADB_DEVICE=
+_ADB_DEVICE_STATUS=
+adb_check_device () {
+  if [ "$_ADB_DEVICE_STATUS" ]; then
+    return $_ADB_DEVICE_STATUS
+  fi
+
+  # Check for ADB.
+  if ! adb_check $1; then
+    _ADB_DEVICE_STATUS=$_ADB_STATUS
+    return 1
+  fi
+
+  local ADB_DEVICES NUM_DEVICES FINGERPRINT
+
+  # Count the number of connected devices.
+  ADB_DEVICES=$("$_ADB" devices 2>/dev/null | awk '$2 == "device" { print $1; }')
+  NUM_DEVICES=$(echo "$ADB_DEVICES" | wc -l)
+  case $NUM_DEVICES in
+    0)
+      _ADB_ERROR="No Android device connected. Please connect one to your machine."
+      _ADB_DEVICE_STATUS=1
+      return 1
+      ;;
+    1) # Pass
+      # Ensure the same device will be called in later adb_shell calls.
+      export ANDROID_SERIAL=$ADB_DEVICES
+      ;;
+    *) # 2 or more devices.
+      if [ "$ANDROID_SERIAL" ]; then
+        ADB_DEVICES=$ANDROID_SERIAL
+        NUM_DEVICES=1
+      else
+        _ADB_ERROR="More than one Android device connected. \
+Please define ANDROID_SERIAL in your environment"
+        _ADB_DEVICE_STATUS=1
+        return 1
+      fi
+      ;;
+  esac
+
+  _ADB_DEVICE_STATUS=0
+  _ADB_DEVICE=$ADB_DEVICES
+
+  FINGERPRINT=$(adb_shell getprop ro.build.fingerprint)
+  log "Using ADB device: $ANDROID_SERIAL ($FINGERPRINT)"
+  return 0
+}
+
+# The 'adb shell' command is pretty hopeless, try to make sense of it by:
+#   1/ Removing trailing \r from line endings.
+#   2/ Ensuring the function returns the command's status code.
+#
+# $1+: Command
+# Out: command output (stdout + stderr combined)
+# Return: command exit status
+adb_shell () {
+  local RET ADB_LOG
+  # Check for ADB device.
+  adb_check_device || return 1
+  ADB_LOG=$(mktemp "${TMPDIR:-/tmp}/adb-XXXXXXXX")
+  "$_ADB" shell "$@" ";" echo \$? > "$ADB_LOG" 2>&1
+  sed -i -e 's![[:cntrl:]]!!g' "$ADB_LOG"  # Remove \r.
+  RET=$(sed -e '$!d' "$ADB_LOG")           # Last line contains status code.
+  sed -e '$d' "$ADB_LOG"                   # Print everything except last line.
+  rm -f "$ADB_LOG"
+  return $RET
+}
+
+# Push a file to a device.
+# $1: source file path
+# $2: device target file path
+# Return: success or failure.
+adb_push () {
+  adb_check_device || return 1
+  run "$_ADB" push "$1" "$2"
+}
+
+# Pull a file from a device
+# $1: device file path
+# $2: target host file path
+# Return: success or failure.
+adb_pull () {
+  adb_check_device || return 1
+  run "$_ADB" pull "$1" "$2"
+}
+
+# Same as adb_push, but will panic if the operations didn't succeed.
+adb_install () {
+  adb_push "$@"
+  fail_panic "Failed to install $1 to the Android device at $2"
+}
+
diff --git a/toolkit/crashreporter/google-breakpad/android/google_breakpad/Android.mk b/toolkit/crashreporter/google-breakpad/android/google_breakpad/Android.mk
new file mode 100644
index 0000000000..8618492774
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/google_breakpad/Android.mk
@@ -0,0 +1,104 @@
+# Copyright (c) 2012, Google Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+#     * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+#     * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# ndk-build module definition for the Google Breakpad client library
+#
+# To use this file, do the following:
+#
+#   1/ Include this file from your own Android.mk, either directly
+#      or with through the NDK's import-module function.
+#
+#   2/ Use the client static library in your project with:
+#
+#      LOCAL_STATIC_LIBRARIES += breakpad_client
+#
+#   3/ In your source code, include "src/client/linux/exception_handler.h"
+#      and use the Linux instructions to use it.
+#
+# This module works with either the STLport or GNU libstdc++, but you need
+# to select one in your Application.mk
+#
+
+# The top Google Breakpad directory.
+# We assume this Android.mk to be under 'android/google_breakpad'
+
+LOCAL_PATH := $(call my-dir)/../..
+
+# Defube the client library module, as a simple static library that
+# exports the right include path / linker flags to its users.
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := breakpad_client
+
+LOCAL_CPP_EXTENSION := .cc
+
+# Breakpad uses inline ARM assembly that requires the library
+# to be built in ARM mode. Otherwise, the build will fail with
+# cryptic assembler messages like:
+#   Compile++ thumb  : google_breakpad_client <= crash_generation_client.cc
+#   /tmp/cc8aMSoD.s: Assembler messages:
+#   /tmp/cc8aMSoD.s:132: Error: invalid immediate: 288 is out of range
+#   /tmp/cc8aMSoD.s:244: Error: invalid immediate: 296 is out of range
+LOCAL_ARM_MODE := arm
+
+# List of client source files, directly taken from Makefile.am
+LOCAL_SRC_FILES := \
+    src/client/linux/crash_generation/crash_generation_client.cc \
+    src/client/linux/dump_writer_common/thread_info.cc \
+    src/client/linux/dump_writer_common/ucontext_reader.cc \
+    src/client/linux/handler/exception_handler.cc \
+    src/client/linux/handler/minidump_descriptor.cc \
+    src/client/linux/log/log.cc \
+    src/client/linux/microdump_writer/microdump_writer.cc \
+    src/client/linux/minidump_writer/linux_dumper.cc \
+    src/client/linux/minidump_writer/linux_ptrace_dumper.cc \
+    src/client/linux/minidump_writer/minidump_writer.cc \
+    src/client/minidump_file_writer.cc \
+    src/common/convert_UTF.cc \
+    src/common/md5.cc \
+    src/common/string_conversion.cc \
+    src/common/linux/breakpad_getcontext.S \
+    src/common/linux/elfutils.cc \
+    src/common/linux/file_id.cc \
+    src/common/linux/guid_creator.cc \
+    src/common/linux/linux_libc_support.cc \
+    src/common/linux/memory_mapped_file.cc \
+    src/common/linux/safe_readlink.cc
+
+LOCAL_C_INCLUDES        := $(LOCAL_PATH)/src/common/android/include \
+                           $(LOCAL_PATH)/src \
+                           $(LSS_PATH)
+
+LOCAL_EXPORT_C_INCLUDES := $(LOCAL_C_INCLUDES)
+LOCAL_EXPORT_LDLIBS     := -llog
+
+include $(BUILD_STATIC_LIBRARY)
+
+# Done.
diff --git a/toolkit/crashreporter/google-breakpad/android/run-checks.sh b/toolkit/crashreporter/google-breakpad/android/run-checks.sh
new file mode 100755
index 0000000000..51d2d50231
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/run-checks.sh
@@ -0,0 +1,555 @@
+#!/bin/sh
+# Copyright (c) 2012 Google Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+#     * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+#     * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Sanitize the environment
+export LANG=C
+export LC_ALL=C
+
+if [ "$BASH_VERSION" ]; then
+  set -o posix
+fi
+
+PROGDIR=$(dirname "$0")
+PROGDIR=$(cd "$PROGDIR" && pwd)
+PROGNAME=$(basename "$0")
+
+. $PROGDIR/common-functions.sh
+
+DEFAULT_ABI="armeabi"
+VALID_ABIS="armeabi armeabi-v7a x86 mips"
+
+ABI=
+ADB=
+ALL_TESTS=
+ENABLE_M32=
+HELP=
+HELP_ALL=
+NDK_DIR=
+NO_CLEANUP=
+NO_DEVICE=
+NUM_JOBS=$(get_core_count)
+TMPDIR=
+
+for opt do
+  # The following extracts the value if the option is like --name=<value>.
+  optarg=$(expr -- $opt : '^--[^=]*=\(.*\)$')
+  case $opt in
+    --abi=*) ABI=$optarg;;
+    --adb=*) ADB=$optarg;;
+    --all-tests) ALL_TESTS=true;;
+    --enable-m32) ENABLE_M32=true;;
+    --help|-h|-?) HELP=TRUE;;
+    --help-all) HELP_ALL=true;;
+    --jobs=*) NUM_JOBS=$optarg;;
+    --ndk-dir=*) NDK_DIR=$optarg;;
+    --tmp-dir=*) TMPDIR=$optarg;;
+    --no-cleanup) NO_CLEANUP=true;;
+    --no-device) NO_DEVICE=true;;
+    --quiet) decrease_verbosity;;
+    --verbose) increase_verbosity;;
+    -*) panic "Invalid option '$opt', see --help for details.";;
+    *) panic "This script doesn't take any parameters. See --help for details."
+       ;;
+  esac
+done
+
+if [ "$HELP" -o "$HELP_ALL" ]; then
+  echo "\
+  Usage: $PROGNAME [options]
+
+  This script is used to check that your Google Breakpad source tree can
+  be properly built for Android, and that the client library and host tools
+  work properly together.
+"
+  if [ "$HELP_ALL" ]; then
+    echo "\
+  In more details, this script will:
+
+  - Rebuild the host version of Google Breakpad in a temporary
+    directory (with the Auto-tools based build system).
+
+  - Rebuild the Android client library with the Google Breakpad build
+    system (using autotools/configure). This requires that you define
+    ANDROID_NDK_ROOT in your environment to point to a valid Android NDK
+    installation directory, or use the --ndk-dir=<path> option.
+
+  - Rebuild the Android client library and a test crashing program with the
+    Android NDK build system (ndk-build).
+
+  - Require an Android device connected to your machine, and the 'adb'
+    tool in your path. They are used to:
+
+      - Install and  run a test crashing program.
+      - Extract the corresponding minidump from the device.
+      - Dump the symbols from the test program on the host with 'dump_syms'
+      - Generate a stack trace with 'minidump_stackwalk'
+      - Check the stack trace content for valid source file locations.
+
+    You can however skip this requirement and only test the builds by using
+    the --no-device flag.
+
+    By default, all generated files will be created in a temporary directory
+    that is removed when the script completion. If you want to inspect the
+    files, use the --no-cleanup option.
+
+    Finally, use --verbose to increase the verbosity level, this will help
+    you see which exact commands are being issues and their result. Use the
+    flag twice for even more output. Use --quiet to decrease verbosity
+    instead and run the script silently.
+
+    If you have a device connected, the script will probe it to determine
+    its primary CPU ABI, and build the test program for it. You can however
+    use the --abi=<name> option to override this (this can be useful to check
+    the secondary ABI, e.g. using --abi=armeabi to check that such a program
+    works correctly on an ARMv7-A device).
+
+    If you don't have a device connected, the test program will be built (but
+    not run) with the default '$DEFAULT_ABI' ABI. Again, you can use
+    --abi=<name> to override this. Valid ABI names are:
+
+        $VALID_ABIS
+
+    The script will only run the client library unit test on the device
+    by default. You can use --all-tests to also build and run the unit
+    tests for the Breakpad tools and processor, but be warned that this
+    adds several minutes of testing time. --all-tests will also run the
+    host unit tests suite.
+"
+
+  fi  # HELP_ALL
+
+  echo "\
+  Valid options:
+
+      --help|-h|-?     Display this message.
+      --help-all       Display extended help.
+      --enable-m32     Build 32-bit version of host tools.
+      --abi=<name>     Specify target CPU ABI [auto-detected].
+      --jobs=<count>   Run <count> build tasks in parallel [$NUM_JOBS].
+      --ndk-dir=<path> Specify NDK installation directory.
+      --tmp-dir=<path> Specify temporary directory (will be wiped-out).
+      --adb=<path>     Specify adb program path.
+      --no-cleanup     Don't remove temporary directory after completion.
+      --no-device      Do not try to detect devices, nor run crash test.
+      --all-tests      Run all unit tests (i.e. tools and processor ones too).
+      --verbose        Increase verbosity.
+      --quiet          Decrease verbosity."
+
+  exit 0
+fi
+
+TESTAPP_DIR=$PROGDIR/sample_app
+
+# Select NDK install directory.
+if [ -z "$NDK_DIR" ]; then
+  if [ -z "$ANDROID_NDK_ROOT" ]; then
+    panic "Please define ANDROID_NDK_ROOT in your environment, or use \
+--ndk-dir=<path>."
+  fi
+  NDK_DIR="$ANDROID_NDK_ROOT"
+  log "Found NDK directory: $NDK_DIR"
+else
+  log "Using NDK directory: $NDK_DIR"
+fi
+# Small sanity check.
+NDK_BUILD="$NDK_DIR/ndk-build"
+if [ ! -f "$NDK_BUILD" ]; then
+  panic "Your NDK directory is not valid (missing ndk-build): $NDK_DIR"
+fi
+
+# Ensure the temporary directory is deleted on exit, except if the --no-cleanup
+# option is used.
+
+clean_tmpdir () {
+  if [ "$TMPDIR" ]; then
+    if [ -z "$NO_CLEANUP" ]; then
+      log "Cleaning up: $TMPDIR"
+      rm -rf "$TMPDIR"
+    else
+      dump "Temporary directory contents preserved: $TMPDIR"
+    fi
+  fi
+  exit "$@"
+}
+
+atexit clean_tmpdir
+
+# If --tmp-dir=<path> is not used, create a temporary directory.
+# Otherwise, start by cleaning up the user-provided path.
+if [ -z "$TMPDIR" ]; then
+  TMPDIR=$(mktemp -d /tmp/$PROGNAME.XXXXXXXX)
+  fail_panic "Can't create temporary directory!"
+  log "Using temporary directory: $TMPDIR"
+else
+  if [ ! -d "$TMPDIR" ]; then
+    mkdir -p "$TMPDIR"
+    fail_panic "Can't create temporary directory: $TMPDIR"
+  else
+    log "Cleaning up temporary directory: $TMPDIR"
+    rm -rf "$TMPDIR"/*
+    fail_panic "Cannot cleanup temporary directory!"
+  fi
+fi
+
+if [ -z "$NO_DEVICE" ]; then
+  if ! adb_check_device $ADB; then
+    echo "$(adb_get_error)"
+    echo "Use --no-device to build the code without running any tests."
+    exit 1
+  fi
+fi
+
+BUILD_LOG="$TMPDIR/build.log"
+RUN_LOG="$TMPDIR/run.log"
+CRASH_LOG="$TMPDIR/crash.log"
+
+set_run_log "$RUN_LOG"
+
+TMPHOST="$TMPDIR/host-local"
+
+cd "$TMPDIR"
+
+# Build host version of the tools
+dump "Building host binaries."
+CONFIGURE_FLAGS=
+if [ "$ENABLE_M32" ]; then
+  CONFIGURE_FLAGS="$CONFIGURE_FLAGS --enable-m32"
+fi
+(
+  run mkdir "$TMPDIR/build-host" &&
+  run cd "$TMPDIR/build-host" &&
+  run2 "$PROGDIR/../configure" --prefix="$TMPHOST" $CONFIGURE_FLAGS &&
+  run2 make -j$NUM_JOBS install
+)
+fail_panic "Can't build host binaries!"
+
+if [ "$ALL_TESTS" ]; then
+  dump "Running host unit tests."
+  (
+    run cd "$TMPDIR/build-host" &&
+    run2 make -j$NUM_JOBS check
+  )
+  fail_panic "Host unit tests failed!!"
+fi
+
+TMPBIN=$TMPHOST/bin
+
+# Generate a stand-alone NDK toolchain
+
+# Extract CPU ABI and architecture from device, if any.
+if adb_check_device; then
+  DEVICE_ABI=$(adb_shell getprop ro.product.cpu.abi)
+  DEVICE_ABI2=$(adb_shell getprop ro.product.cpu.abi2)
+  if [ -z "$DEVICE_ABI" ]; then
+    panic "Can't extract ABI from connected device!"
+  fi
+  if [ "$DEVICE_ABI2" ]; then
+    dump "Found device ABIs: $DEVICE_ABI $DEVICE_ABI2"
+  else
+    dump "Found device ABI: $DEVICE_ABI"
+    DEVICE_ABI2=$DEVICE_ABI
+  fi
+
+  # If --abi=<name> is used, check that the device supports it.
+  if [ "$ABI" -a "$DEVICE_ABI" != "$ABI" -a "$DEVICE_ABI2" != "$ABI" ]; then
+    dump  "ERROR: Device ABI(s) do not match --abi command-line value ($ABI)!"
+    panic "Please use --no-device to skip device tests."
+  fi
+
+  if [ -z "$ABI" ]; then
+    ABI=$DEVICE_ABI
+    dump "Using CPU ABI: $ABI (device)"
+  else
+    dump "Using CPU ABI: $ABI (command-line)"
+  fi
+else
+  if [ -z "$ABI" ]; then
+    # No device connected, choose default ABI
+    ABI=$DEFAULT_ABI
+    dump "Using CPU ABI: $ABI (default)"
+  else
+    dump "Using CPU ABI: $ABI (command-line)"
+  fi
+fi
+
+# Check the ABI value
+VALID=
+for VALID_ABI in $VALID_ABIS; do
+  if [ "$ABI" = "$VALID_ABI" ]; then
+    VALID=true
+    break
+  fi
+done
+
+if [ -z "$VALID" ]; then
+  panic "Unknown CPU ABI '$ABI'. Valid values are: $VALID_ABIS"
+fi
+
+# Extract architecture name from ABI
+case $ABI in
+  armeabi*) ARCH=arm;;
+  *) ARCH=$ABI;;
+esac
+
+# Extract GNU configuration name
+case $ARCH in
+  arm)
+    GNU_CONFIG=arm-linux-androideabi
+    ;;
+  x86)
+    GNU_CONFIG=i686-linux-android
+    ;;
+  mips)
+    GNU_CONFIG=mipsel-linux-android
+    ;;
+  *)
+    GNU_CONFIG="$ARCH-linux-android"
+    ;;
+esac
+
+# Generate standalone NDK toolchain installation
+NDK_STANDALONE="$TMPDIR/ndk-$ARCH-toolchain"
+echo "Generating NDK standalone toolchain installation"
+mkdir -p "$NDK_STANDALONE"
+# NOTE: The --platform=android-9 is required to provide <regex.h> for GTest.
+run "$NDK_DIR/build/tools/make-standalone-toolchain.sh" \
+      --arch="$ARCH" \
+      --platform=android-9 \
+      --install-dir="$NDK_STANDALONE"
+fail_panic "Can't generate standalone NDK toolchain installation!"
+
+# Rebuild the client library, processor and tools with the auto-tools based
+# build system. Even though it's not going to be used, this checks that this
+# still works correctly.
+echo "Building full Android binaries with configure/make"
+TMPTARGET="$TMPDIR/target-local"
+(
+  PATH="$NDK_STANDALONE/bin:$PATH"
+  run mkdir "$TMPTARGET" &&
+  run mkdir "$TMPDIR"/build-target &&
+  run cd "$TMPDIR"/build-target &&
+  run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
+                               --host="$GNU_CONFIG" &&
+  run2 make -j$NUM_JOBS install
+)
+fail_panic "Could not rebuild Android binaries!"
+
+# Build and/or run unit test suite.
+# If --no-device is used, only rebuild it, otherwise, run in on the
+# connected device.
+if [ "$NO_DEVICE" ]; then
+  ACTION="Building"
+  # This is a trick to force the Makefile to ignore running the scripts.
+  TESTS_ENVIRONMENT="TESTS_ENVIRONMENT=true"
+else
+  ACTION="Running"
+  TESTS_ENVIRONMENT=
+fi
+
+(
+  PATH="$NDK_STANDALONE/bin:$PATH"
+  run cd "$TMPDIR"/build-target &&
+  # Reconfigure to only run the client unit test suite.
+  # This one should _never_ fail.
+  dump "$ACTION Android client library unit tests."
+  run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
+                               --host="$GNU_CONFIG" \
+                               --disable-tools \
+                               --disable-processor &&
+  run make -j$NUM_JOBS check $TESTS_ENVIRONMENT || exit $?
+
+  if [ "$ALL_TESTS" ]; then
+    dump "$ACTION Tools and processor unit tests."
+    # Reconfigure to run the processor and tools tests.
+    # Most of these fail for now, so do not worry about it.
+    run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
+                                 --host="$GNU_CONFIG" &&
+    run make -j$NUM_JOBS check $TESTS_ENVIRONMENT
+    if [ $? != 0 ]; then
+      dump "Tools and processor unit tests failed as expected. \
+Use --verbose for results."
+    fi                           
+  fi
+)
+fail_panic "Client library unit test suite failed!"
+
+# Copy sources to temporary directory
+PROJECT_DIR=$TMPDIR/project
+dump "Copying test program sources to: $PROJECT_DIR"
+run cp -r "$TESTAPP_DIR" "$PROJECT_DIR" &&
+run rm -rf "$PROJECT_DIR/obj" &&
+run rm -rf "$PROJECT_DIR/libs"
+fail_panic "Could not copy test program sources to: $PROJECT_DIR"
+
+# Build the test program with ndk-build.
+dump "Building test program with ndk-build"
+export NDK_MODULE_PATH="$PROGDIR"
+NDK_BUILD_FLAGS="-j$NUM_JOBS"
+if verbosity_is_higher_than 1; then
+  NDK_BUILD_FLAGS="$NDK_BUILD_FLAGS NDK_LOG=1 V=1"
+fi
+run "$NDK_DIR/ndk-build" -C "$PROJECT_DIR" $NDK_BUILD_FLAGS APP_ABI=$ABI
+fail_panic "Can't build test program!"
+
+# Unless --no-device was used, stop right here if ADB isn't in the path,
+# or there is no connected device.
+if [ "$NO_DEVICE" ]; then
+  dump "Done. Please connect a device to run all tests!"
+  clean_exit 0
+fi
+
+# Push the program to the device.
+TESTAPP=test_google_breakpad
+TESTAPP_FILE="$PROJECT_DIR/libs/$ABI/test_google_breakpad"
+if [ ! -f "$TESTAPP_FILE" ]; then
+  panic "Device requires '$ABI' binaries. None found!"
+fi
+
+# Run the program there
+dump "Installing test program on device"
+DEVICE_TMP=/data/local/tmp
+adb_push "$TESTAPP_FILE" "$DEVICE_TMP/"
+fail_panic "Cannot push test program to device!"
+
+dump "Running test program on device"
+adb_shell cd "$DEVICE_TMP" "&&" ./$TESTAPP > "$CRASH_LOG" 2>/dev/null
+if [ $? = 0 ]; then
+  panic "Test program did *not* crash as expected!"
+fi
+if verbosity_is_higher_than 0; then
+  echo -n "Crash log: "
+  cat "$CRASH_LOG"
+fi
+
+# Extract minidump from device
+MINIDUMP_NAME=$(awk '$1 == "Dump" && $2 == "path:" { print $3; }' "$CRASH_LOG")
+MINIDUMP_NAME=$(basename "$MINIDUMP_NAME")
+if [ -z "$MINIDUMP_NAME" ]; then
+  panic "Test program didn't write minidump properly!"
+fi
+
+dump "Extracting minidump: $MINIDUMP_NAME"
+adb_pull "$DEVICE_TMP/$MINIDUMP_NAME" .
+fail_panic "Can't extract minidump!"
+
+dump "Parsing test program symbols"
+if verbosity_is_higher_than 1; then
+  log "COMMAND: $TMPBIN/dump_syms \
+                $PROJECT_DIR/obj/local/$ABI/$TESTAPP >$TESTAPP.sym"
+fi
+"$TMPBIN/dump_syms" "$PROJECT_DIR/obj/local/$ABI/$TESTAPP" > $TESTAPP.sym
+fail_panic "dump_syms doesn't work!"
+
+VERSION=$(awk '$1 == "MODULE" { print $4; }' $TESTAPP.sym)
+dump "Found module version: $VERSION"
+if [ -z "$VERSION" ]; then
+  echo "ERROR: Can't find proper module version from symbol dump!"
+  head -n5 $TESTAPP.sym
+  clean_exit 1
+fi
+
+run mkdir -p "$TMPDIR/symbols/$TESTAPP/$VERSION"
+run mv $TESTAPP.sym "$TMPDIR/symbols/$TESTAPP/$VERSION/"
+
+dump "Generating stack trace"
+# Don't use 'run' to be able to send stdout and stderr to two different files.
+log "COMMAND: $TMPBIN/minidump_stackwalk $MINIDUMP_NAME symbols"
+"$TMPBIN/minidump_stackwalk" $MINIDUMP_NAME \
+                             "$TMPDIR/symbols" \
+                             > "$BUILD_LOG" 2>>"$RUN_LOG"
+fail_panic "minidump_stackwalk doesn't work!"
+
+dump "Checking stack trace content"
+
+if verbosity_is_higher_than 1; then
+  cat "$BUILD_LOG"
+fi
+
+# The generated stack trace should look like the following:
+#
+# Thread 0 (crashed)
+#  0  test_google_breakpad!crash [test_breakpad.cpp : 17 + 0x4]
+#      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
+#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
+#      sp = 0xbea2cb50    lr = 0x00009025    pc = 0x00008f84
+#     Found by: given as instruction pointer in context
+#  1  test_google_breakpad!main [test_breakpad.cpp : 25 + 0x3]
+#      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
+#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
+#      sp = 0xbea2cb50    pc = 0x00009025
+#     Found by: call frame info
+#  2  libc.so + 0x164e5
+#      r4 = 0x00008f64    r5 = 0xbea2cc34    r6 = 0x00000001    r7 = 0xbea2cc3c
+#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
+#      sp = 0xbea2cc18    pc = 0x400c34e7
+#     Found by: call frame info
+# ...
+#
+# The most important part for us is ensuring that the source location could
+# be extracted, so look at the 'test_breakpad.cpp' references here.
+#
+# First, extract all the lines with test_google_breakpad! in them, and
+# dump the corresponding crash location.
+#
+# Note that if the source location can't be extracted, the second field
+# will only be 'test_google_breakpad' without the exclamation mark.
+#
+LOCATIONS=$(awk '$2 ~ "^test_google_breakpad!.*" { print $3; }' "$BUILD_LOG")
+
+if [ -z "$LOCATIONS" ]; then
+  if verbosity_is_lower_than 1; then
+    cat "$BUILD_LOG"
+  fi
+  panic "No source location found in stack trace!"
+fi
+
+# Now check that they all match "[<source file>"
+BAD_LOCATIONS=
+for LOCATION in $LOCATIONS; do
+  case $LOCATION in
+    # Escape the opening bracket, or some shells like Dash will not
+    # match them properly.
+    \[*.cpp|\[*.cc|\[*.h) # These are valid source locations in our executable
+      ;;
+    *) # Everything else is not!
+      BAD_LOCATIONS="$BAD_LOCATIONS $LOCATION"
+      ;;
+  esac
+done
+
+if [ "$BAD_LOCATIONS" ]; then
+  dump "ERROR: Generated stack trace doesn't contain valid source locations:"
+  cat "$BUILD_LOG"
+  echo "Bad locations are: $BAD_LOCATIONS"
+  exit 1
+fi
+
+echo "All clear! Congratulations."
+
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/README b/toolkit/crashreporter/google-breakpad/android/sample_app/README
new file mode 100644
index 0000000000..aa19dbb447
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/sample_app/README
@@ -0,0 +1,32 @@
+This is a sample Android executable that can be used to test the
+Google Breakpad client library on Android.
+
+Its purpose is simply to crash and generate a minidump under /data/local/tmp.
+
+Build instructions:
+
+   cd android/sample_app
+   $NDK/ndk-build
+
+  Where $NDK points to a valid Android NDK installation.
+
+Usage instructions:
+
+   After buildind the test program, send it to a device, then run it as
+   the shell UID:
+
+     adb push libs/armeabi/test_google_breakpad /data/local/tmp
+     adb shell /data/local/tmp/test_google_breakpad
+
+   This will simply crash after dumping the name of the generated minidump
+   file.
+
+   See jni/test_breakpad.cpp for details.
+
+   Use 'armeabi-v7a' instead of 'armeabi' above to test the ARMv7-A version
+   of the binary.
+
+Note:
+   If you plan to use the library in a regular Android application, store
+   the minidump files either to your app-specific directory, or to the SDCard
+   (the latter requiring a specific permission).
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Android.mk b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Android.mk
new file mode 100644
index 0000000000..61487b52c1
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Android.mk
@@ -0,0 +1,44 @@
+# Copyright (c) 2012, Google Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+#     * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+#     * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := test_google_breakpad
+LOCAL_SRC_FILES := test_breakpad.cpp
+LOCAL_STATIC_LIBRARIES += breakpad_client
+include $(BUILD_EXECUTABLE)
+
+# If NDK_MODULE_PATH is defined, import the module, otherwise do a direct
+# includes. This allows us to build in all scenarios easily.
+ifneq ($(NDK_MODULE_PATH),)
+  $(call import-module,google_breakpad)
+else
+  include $(LOCAL_PATH)/../../google_breakpad/Android.mk
+endif
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Application.mk b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Application.mk
new file mode 100644
index 0000000000..9728017d3f
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/Application.mk
@@ -0,0 +1,32 @@
+# Copyright (c) 2012, Google Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+#     * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+#     * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+APP_STL := stlport_static
+APP_ABI := all
+APP_CXXFLAGS := -std=c++11 -D__STDC_LIMIT_MACROS
diff --git a/toolkit/crashreporter/google-breakpad/android/sample_app/jni/test_breakpad.cpp b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/test_breakpad.cpp
new file mode 100644
index 0000000000..9c4ebbb148
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/sample_app/jni/test_breakpad.cpp
@@ -0,0 +1,57 @@
+// Copyright (c) 2012, Google Inc.
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include <stdio.h>
+
+#include "client/linux/handler/exception_handler.h"
+#include "client/linux/handler/minidump_descriptor.h"
+
+namespace {
+
+bool DumpCallback(const google_breakpad::MinidumpDescriptor& descriptor,
+                  void* context,
+                  bool succeeded) {
+  printf("Dump path: %s\n", descriptor.path());
+  return succeeded;
+}
+
+void Crash() {
+  volatile int* a = reinterpret_cast<volatile int*>(NULL);
+  *a = 1;
+}
+
+}  // namespace
+
+int main(int argc, char* argv[]) {
+  google_breakpad::MinidumpDescriptor descriptor(".");
+  google_breakpad::ExceptionHandler eh(descriptor, NULL, DumpCallback,
+                                       NULL, true, -1);
+  Crash();
+  return 0;
+}
diff --git a/toolkit/crashreporter/google-breakpad/android/test-driver b/toolkit/crashreporter/google-breakpad/android/test-driver
new file mode 100755
index 0000000000..eaaac6b295
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/test-driver
@@ -0,0 +1,131 @@
+#! /bin/sh
+# test-driver - basic testsuite driver script.
+
+# Slightly modified for Android, see ANDROID comment below.
+
+scriptversion=2012-06-27.10; # UTC
+
+# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+# Make unconditional expansion of undefined variables an error.  This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+usage_error ()
+{
+  echo "$0: $*" >&2
+  print_usage >&2
+  exit 2
+}
+
+print_usage ()
+{
+  cat <<END
+Usage:
+  test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
+              [--expect-failure={yes|no}] [--color-tests={yes|no}]
+              [--enable-hard-errors={yes|no}] [--] TEST-SCRIPT
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
+END
+}
+
+# TODO: better error handling in option parsing (in particular, ensure
+# TODO: $log_file, $trs_file and $test_name are defined).
+test_name= # Used for reporting.
+log_file=  # Where to save the output of the test script.
+trs_file=  # Where to save the metadata of the test run.
+expect_failure=no
+color_tests=no
+enable_hard_errors=yes
+while test $# -gt 0; do
+  case $1 in
+  --help) print_usage; exit $?;;
+  --version) echo "test-driver $scriptversion"; exit $?;;
+  --test-name) test_name=$2; shift;;
+  --log-file) log_file=$2; shift;;
+  --trs-file) trs_file=$2; shift;;
+  --color-tests) color_tests=$2; shift;;
+  --expect-failure) expect_failure=$2; shift;;
+  --enable-hard-errors) enable_hard_errors=$2; shift;;
+  --) shift; break;;
+  -*) usage_error "invalid option: '$1'";;
+  esac
+  shift
+done
+
+if test $color_tests = yes; then
+  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
+  red='' # Red.
+  grn='' # Green.
+  lgn='' # Light green.
+  blu='' # Blue.
+  mgn='' # Magenta.
+  std=''     # No color.
+else
+  red= grn= lgn= blu= mgn= std=
+fi
+
+do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
+trap "st=129; $do_exit" 1
+trap "st=130; $do_exit" 2
+trap "st=141; $do_exit" 13
+trap "st=143; $do_exit" 15
+
+# Test script is run here.
+# ANDROID: old line was: "$@" > $log_file 2>&1
+progdir=$(dirname "$0")
+"$progdir/test-shell.sh" "$@" > $log_file 2>&1
+estatus=$?
+if test $enable_hard_errors = no && test $estatus -eq 99; then
+  estatus=1
+fi
+
+case $estatus:$expect_failure in
+  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
+  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
+  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
+  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
+  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
+  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
+esac
+
+# Report outcome to console.
+echo "${col}${res}${std}: $test_name"
+
+# Register the test result, and other relevant metadata.
+echo ":test-result: $res" > $trs_file
+echo ":global-test-result: $res" >> $trs_file
+echo ":recheck: $recheck" >> $trs_file
+echo ":copy-in-global-log: $gcopy" >> $trs_file
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/toolkit/crashreporter/google-breakpad/android/test-shell.sh b/toolkit/crashreporter/google-breakpad/android/test-shell.sh
new file mode 100755
index 0000000000..3677d8755a
--- /dev/null
+++ b/toolkit/crashreporter/google-breakpad/android/test-shell.sh
@@ -0,0 +1,131 @@
+#!/bin/sh
+#
+# Copyright (c) 2012 Google Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+#     * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+#     * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# A special shell wrapper that can be used to run the Google Breakpad unit
+# tests on a connected Android device.
+#
+# This is designed to be called from the Makefile during 'make check'
+#
+
+PROGDIR=$(dirname "$0")
+PROGNAME=$(basename "$0")
+. $PROGDIR/common-functions.sh
+
+# Extract test program name first.
+TEST_PROGRAM=$1
+shift
+
+if [ -z "$TEST_PROGRAM" ]; then
+  panic "No test program/script name on the command-line!"
+fi
+
+if [ ! -f "$TEST_PROGRAM" ]; then
+  panic "Can't find test program/script: $TEST_PROGRAM"
+fi
+
+# Create test directory on the device
+TEST_DIR=/data/local/tmp/test-google-breakpad-$$
+adb_shell mkdir "$TEST_DIR" ||
+    panic "Can't create test directory on device: $TEST_DIR"
+
+# Ensure that it is always removed when the script exits.
+clean_test_dir () {
+  # Don't care about success/failure, use '$ADB shell' directly.
+  adb_shell rm -r "$TEST_DIR"
+}
+
+atexit clean_test_dir
+
+TEST_PROGRAM_NAME=$(basename "$TEST_PROGRAM")
+TEST_PROGRAM_DIR=$(dirname "$TEST_PROGRAM")
+
+# Handle special case(s) here.
+DATA_FILES=
+case $TEST_PROGRAM_NAME in
+  linux_client_unittest)
+    # linux_client_unittest will call another executable at runtime, ensure
+    # it is installed too.
+    adb_install "$TEST_PROGRAM_DIR/linux_dumper_unittest_helper" "$TEST_DIR"
+    # linux_client_unittest loads a shared library at runtime, ensure it is
+    # installed too.
+    adb_install "$TEST_PROGRAM_DIR/linux_client_unittest_shlib" "$TEST_DIR"
+    ;;
+  basic_source_line_resolver_unittest)
+    DATA_FILES="module1.out \
+                module2.out \
+                module3_bad.out \
+                module4_bad.out"
+    ;;
+  exploitability_unittest)
+    DATA_FILES="scii_read_av.dmp \
+                ascii_read_av_block_write.dmp \
+                ascii_read_av_clobber_write.dmp \
+                ascii_read_av_conditional.dmp \
+                ascii_read_av_non_null.dmp \
+                ascii_read_av_then_jmp.dmp \
+                ascii_read_av_xchg_write.dmp \
+                ascii_write_av.dmp \
+                ascii_write_av_arg_to_call.dmp \
+                exec_av_on_stack.dmp \
+                null_read_av.dmp \
+                null_write_av.dmp \
+                read_av.dmp \
+                null_read_av.dmp \
+                write_av_non_null.dmp"
+    ;;
+  fast_source_line_resolver_unittest)
+    DATA_FILES="module0.out \
+                module1.out \
+                module2.out \
+                module3_bad.out \
+                module4_bad.out"
+    ;;
+  minidump_processor_unittest|minidump_unittest)
+    DATA_FILES="src/processor/testdata/minidump2.dmp"
+    ;;
+esac
+
+# Install the data files, their path is relative to the environment
+# variable 'srcdir'
+for FILE in $DATA_FILES; do
+  FILEDIR=src/processor/testdata/$(dirname "$FILE")
+  adb_shell mkdir -p "$TEST_DIR/$FILEDIR"
+  adb_install "${srcdir:-.}/$FILE" "$TEST_DIR"/"$FILE"
+done
+
+# Copy test program to device
+adb_install "$TEST_PROGRAM" "$TEST_DIR"
+
+# Run it
+adb_shell "cd $TEST_DIR && LD_LIBRARY_PATH=. ./$TEST_PROGRAM_NAME $@"
+
+# Note: exiting here will call cleanup_exit which will remove the temporary
+#       files from the device.