From 36d22d82aa202bb199967e9512281e9a53db42c9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 21:33:14 +0200 Subject: Adding upstream version 115.7.0esr. Signed-off-by: Daniel Baumann --- docs/nspr/reference/nspr_error_handling.rst | 206 ++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 docs/nspr/reference/nspr_error_handling.rst (limited to 'docs/nspr/reference/nspr_error_handling.rst') diff --git a/docs/nspr/reference/nspr_error_handling.rst b/docs/nspr/reference/nspr_error_handling.rst new file mode 100644 index 0000000000..df40678607 --- /dev/null +++ b/docs/nspr/reference/nspr_error_handling.rst @@ -0,0 +1,206 @@ +This chapter describes the functions for retrieving and setting errors +and the error codes set by NSPR. + +- `Error Type <#Error_Type>`__ +- `Error Functions <#Error_Functions>`__ +- `Error Codes <#Error_Codes>`__ + +For information on naming conventions for NSPR types, functions, and +macros, see `NSPR Naming +Conventions `__. + +.. _Error_Type: + +Error Type +---------- + + - :ref:`PRErrorCode` + +.. _Error_Functions: + +Error Functions +--------------- + + - :ref:`PR_SetError` + - :ref:`PR_SetErrorText` + - :ref:`PR_GetError` + - :ref:`PR_GetOSError` + - :ref:`PR_GetErrorTextLength` + - :ref:`PR_GetErrorText` + +.. _Error_Codes: + +Error Codes +----------- + +Error codes defined in ``prerror.h``: + +``PR_OUT_OF_MEMORY_ERROR`` + Insufficient memory to perform request. +``PR_BAD_DESCRIPTOR_ERROR`` + The file descriptor used as an argument in the preceding function is + invalid. +``PR_WOULD_BLOCK_ERROR`` + The operation would have blocked, which conflicts with the semantics + that have been established. +``PR_ACCESS_FAULT_ERROR`` + One of the arguments of the preceding function specified an invalid + memory address. +``PR_INVALID_METHOD_ERROR`` + The preceding function is invalid for the type of file descriptor + used. +``PR_ILLEGAL_ACCESS_ERROR`` + One of the arguments of the preceding function specified an invalid + memory address. +``PR_UNKNOWN_ERROR`` + Some unknown error has occurred. +``PR_PENDING_INTERRUPT_ERROR`` + The operation terminated because another thread has interrupted it + with :ref:`PR_Interrupt`. +``PR_NOT_IMPLEMENTED_ERROR`` + The preceding function has not been implemented. +``PR_IO_ERROR`` + The preceding I/O function encountered some sort of an error, perhaps + an invalid device. +``PR_IO_TIMEOUT_ERROR`` + The I/O operation has not completed in the time specified for the + preceding function. +``PR_IO_PENDING_ERROR`` + An I/O operation has been attempted on a file descriptor that is + currently busy with another operation. +``PR_DIRECTORY_OPEN_ERROR`` + The directory could not be opened. +``PR_INVALID_ARGUMENT_ERROR`` + One or more of the arguments to the function is invalid. +``PR_ADDRESS_NOT_AVAILABLE_ERROR`` + The network address (:ref:`PRNetAddr`) is not available (probably in + use). +``PR_ADDRESS_NOT_SUPPORTED_ERROR`` + The type of network address specified is not supported. +``PR_IS_CONNECTED_ERROR`` + An attempt to connect on an already connected network file + descriptor. +``PR_BAD_ADDRESS_ERROR`` + The network address specified is invalid (as reported by the + network). +``PR_ADDRESS_IN_USE_ERROR`` + Network address specified (:ref:`PRNetAddr`) is in use. +``PR_CONNECT_REFUSED_ERROR`` + The peer has refused to allow the connection to be established. +``PR_NETWORK_UNREACHABLE_ERROR`` + The network address specifies a host that is unreachable (perhaps + temporary). +``PR_CONNECT_TIMEOUT_ERROR`` + The connection attempt did not complete in a reasonable period of + time. +``PR_NOT_CONNECTED_ERROR`` + The preceding function attempted to use connected semantics on a + network file descriptor that was not connected. +``PR_LOAD_LIBRARY_ERROR`` + Failure to load a dynamic library. +``PR_UNLOAD_LIBRARY_ERROR`` + Failure to unload a dynamic library. +``PR_FIND_SYMBOL_ERROR`` + Symbol could not be found in the specified library. +``PR_INSUFFICIENT_RESOURCES_ERROR`` + There are insufficient system resources to process the request. +``PR_DIRECTORY_LOOKUP_ERROR`` + A directory lookup on a network address has failed. +``PR_TPD_RANGE_ERROR`` + Attempt to access a thread-private data index that is out of range of + any index that has been allocated to the process. +``PR_PROC_DESC_TABLE_FULL_ERROR`` + The process' table for holding open file descriptors is full. +``PR_SYS_DESC_TABLE_FULL_ERROR`` + The system's table for holding open file descriptors has been + exceeded. +``PR_NOT_SOCKET_ERROR`` + An attempt to use a non-network file descriptor on a network-only + operation. +``PR_NOT_TCP_SOCKET_ERROR`` + Attempt to perform a TCP specific function on a non-TCP file + descriptor. +``PR_SOCKET_ADDRESS_IS_BOUND_ERRO`` + Attempt to bind an address to a TCP file descriptor that is already + bound. +``PR_NO_ACCESS_RIGHTS_ERROR`` + Calling thread does not have privilege to perform the operation + requested. +``PR_OPERATION_NOT_SUPPORTED_ERRO`` + The requested operation is not supported by the platform. +``PR_PROTOCOL_NOT_SUPPORTED_ERROR`` + The host operating system does not support the protocol requested. +``PR_REMOTE_FILE_ERROR`` + Access to the remote file has been severed. +``PR_BUFFER_OVERFLOW_ERROR`` + The value retrieved is too large to be stored in the buffer provided. +``PR_CONNECT_RESET_ERROR`` + The (TCP) connection has been reset by the peer. +``PR_RANGE_ERROR`` + Unused. +``PR_DEADLOCK_ERROR`` + Performing the requested operation would have caused a deadlock. The + deadlock was avoided. +``PR_FILE_IS_LOCKED_ERROR`` + An attempt to acquire a lock on a file has failed because the file is + already locked. +``PR_FILE_TOO_BIG_ERROR`` + Completing the write or seek operation would have resulted in a file + larger than the system could handle. +``PR_NO_DEVICE_SPACE_ERROR`` + The device for storing the file is full. +``PR_PIPE_ERROR`` + Unused. +``PR_NO_SEEK_DEVICE_ERROR`` + Unused. +``PR_IS_DIRECTORY_ERROR`` + Attempt to perform a normal file operation on a directory. +``PR_LOOP_ERROR`` + Symbolic link loop. +``PR_NAME_TOO_LONG_ERROR`` + Filename is longer than allowed by the host operating system. +``PR_FILE_NOT_FOUND_ERROR`` + The requested file was not found. +``PR_NOT_DIRECTORY_ERROR`` + Attempt to perform directory specific operations on a normal file. +``PR_READ_ONLY_FILESYSTEM_ERROR`` + Attempt to write to a read-only file system. +``PR_DIRECTORY_NOT_EMPTY_ERROR`` + Attempt to delete a directory that is not empty. +``PR_FILESYSTEM_MOUNTED_ERROR`` + Attempt to delete or rename a file object while the file system is + busy. +``PR_NOT_SAME_DEVICE_ERROR`` + Request to rename a file to a file system on another device. +``PR_DIRECTORY_CORRUPTED_ERROR`` + The directory object in the file system is corrupted. +``PR_FILE_EXISTS_ERROR`` + Attempt to create or rename a file when the new name is already being + used. +``PR_MAX_DIRECTORY_ENTRIES_ERROR`` + Attempt to add new filename to directory would exceed the limit + allowed. +``PR_INVALID_DEVICE_STATE_ERROR`` + The device was in an invalid state to complete the desired operation. +``PR_DEVICE_IS_LOCKED_ERROR`` + The device needed to perform the desired request is locked. +``PR_NO_MORE_FILES_ERROR`` + There are no more entries in the directory. +``PR_END_OF_FILE_ERROR`` + Unexpectedly encountered end of file (Mac OS only). +``PR_FILE_SEEK_ERROR`` + An unexpected seek error (Mac OS only). +``PR_FILE_IS_BUSY_ERROR`` + The file is busy and the operation cannot be performed. +``PR_IN_PROGRESS_ERROR`` + The operation is still in progress (probably a nonblocking connect). +``PR_ALREADY_INITIATED_ERROR`` + The (retried) operation has already been initiated (probably a + nonblocking connect). +``PR_GROUP_EMPTY_ERROR`` + The wait group is empty. +``PR_INVALID_STATE_ERROR`` + The attempted operation is on an object that was in an improper state + to perform the request. +``PR_MAX_ERROR`` + Placeholder for the end of the list. -- cgit v1.2.3