Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 507 insertions, 0 deletions

diff --git a/cui/source/tabpages/labdlg.cxx b/cui/source/tabpages/labdlg.cxx
new file mode 100644
index 000000000..cb048426c
--- /dev/null
+++ b/cui/source/tabpages/labdlg.cxx
@@ -0,0 +1,507 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <swpossizetabpage.hxx>
+#include <svtools/unitconv.hxx>
+
+#include <svx/svddef.hxx>
+#include <svx/sxcecitm.hxx>
+#include <svx/sxcgitm.hxx>
+#include <svx/sxcllitm.hxx>
+#include <svx/sxctitm.hxx>
+
+#include <svx/dlgutil.hxx>
+#include <labdlg.hxx>
+#include <transfrm.hxx>
+#include <bitmaps.hlst>
+
+// define ----------------------------------------------------------------
+
+#define EXT_OPTIMAL     0
+#define EXT_FROM_TOP    1
+#define EXT_FROM_LEFT   2
+#define EXT_HORIZONTAL  3
+#define EXT_VERTICAL    4
+
+#define POS_TOP         0
+#define POS_MIDDLE      1
+#define POS_BOTTOM      2
+
+#define BMP_CAPTTYPE_1  1
+#define BMP_CAPTTYPE_2  2
+#define BMP_CAPTTYPE_3  3
+
+// static ----------------------------------------------------------------
+
+const WhichRangesContainer SvxCaptionTabPage::pCaptionRanges(
+    svl::Items<
+    SDRATTR_CAPTIONTYPE, SDRATTR_CAPTIONFIXEDANGLE,
+    SDRATTR_CAPTIONANGLE, SDRATTR_CAPTIONGAP,
+    SDRATTR_CAPTIONESCDIR, SDRATTR_CAPTIONESCISREL,
+    SDRATTR_CAPTIONESCREL, SDRATTR_CAPTIONESCABS,
+    SDRATTR_CAPTIONLINELEN, SDRATTR_CAPTIONFITLINELEN>);
+
+SvxCaptionTabPage::SvxCaptionTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
+    : SfxTabPage(pPage, pController, "cui/ui/calloutpage.ui", "CalloutPage", &rInAttrs)
+    , nCaptionType(SdrCaptionType::Type1)
+    , nGap(0)
+    , nEscDir(SdrCaptionEscDir::Horizontal)
+    , bEscRel(false)
+    , nEscAbs(0)
+    , nEscRel(0)
+    , nLineLen(0)
+    , bFitLineLen(false)
+    , nPosition(0)
+    , nExtension(0)
+    , rOutAttrs(rInAttrs)
+    , pView(nullptr)
+    , m_xMF_SPACING(m_xBuilder->weld_metric_spin_button("spacing", FieldUnit::MM))
+    , m_xLB_EXTENSION(m_xBuilder->weld_combo_box("extension"))
+    , m_xFT_BYFT(m_xBuilder->weld_label("byft"))
+    , m_xMF_BY(m_xBuilder->weld_metric_spin_button("by", FieldUnit::MM))
+    , m_xFT_POSITIONFT(m_xBuilder->weld_label("positionft"))
+    , m_xLB_POSITION(m_xBuilder->weld_combo_box("position"))
+    , m_xLineTypes(m_xBuilder->weld_combo_box("linetypes"))
+    , m_xFT_LENGTHFT(m_xBuilder->weld_label("lengthft"))
+    , m_xMF_LENGTH(m_xBuilder->weld_metric_spin_button("length", FieldUnit::MM))
+    , m_xCB_OPTIMAL(m_xBuilder->weld_check_button("optimal"))
+    , m_xCT_CAPTTYPE(new ValueSet(m_xBuilder->weld_scrolled_window("valuesetwin", true)))
+    , m_xCT_CAPTTYPEWin(new weld::CustomWeld(*m_xBuilder, "valueset", *m_xCT_CAPTTYPE))
+{
+    Size aSize(m_xCT_CAPTTYPE->GetDrawingArea()->get_ref_device().LogicToPixel(Size(187, 38), MapMode(MapUnit::MapAppFont)));
+    m_xCT_CAPTTYPEWin->set_size_request(aSize.Width(), aSize.Height());
+
+    assert(m_xLB_POSITION->get_count() == 6);
+    for (int i = 0;  i < 3; ++i)
+        m_aStrHorzList.push_back(m_xLB_POSITION->get_text(i));
+    for (int i = 3;  i < 6; ++i)
+        m_aStrVertList.push_back(m_xLB_POSITION->get_text(i));
+    m_xLB_POSITION->clear();
+
+    assert(m_xLineTypes->get_count() == 3);
+    std::vector<OUString> aLineTypes;
+    aLineTypes.reserve(3);
+    for (int i = 0; i < 3; ++i)
+        aLineTypes.push_back(m_xLineTypes->get_text(i));
+
+    static_assert(CAPTYPE_BITMAPS_COUNT == 3, "unexpected");
+    m_aBmpCapTypes[0] = Image(StockImage::Yes, RID_SVXBMP_LEGTYP1);
+    m_aBmpCapTypes[1] = Image(StockImage::Yes, RID_SVXBMP_LEGTYP2);
+    m_aBmpCapTypes[2] = Image(StockImage::Yes, RID_SVXBMP_LEGTYP3);
+
+    //------------install ValueSet--------------------------
+    m_xCT_CAPTTYPE->SetStyle( m_xCT_CAPTTYPE->GetStyle() | WB_ITEMBORDER | WB_DOUBLEBORDER | WB_NAMEFIELD );
+    m_xCT_CAPTTYPE->SetColCount(5);//XXX
+    m_xCT_CAPTTYPE->SetLineCount(1);
+    m_xCT_CAPTTYPE->SetSelectHdl(LINK( this, SvxCaptionTabPage, SelectCaptTypeHdl_Impl));
+
+    Image aImage;
+    m_xCT_CAPTTYPE->InsertItem(BMP_CAPTTYPE_1, aImage, aLineTypes[0]);
+    m_xCT_CAPTTYPE->InsertItem(BMP_CAPTTYPE_2, aImage, aLineTypes[1]);
+    m_xCT_CAPTTYPE->InsertItem(BMP_CAPTTYPE_3, aImage, aLineTypes[2]);
+
+    FillValueSet();
+
+    m_xLB_EXTENSION->connect_changed(LINK(this, SvxCaptionTabPage, ExtensionSelectHdl_Impl));
+    m_xLB_POSITION->connect_changed(LINK(this, SvxCaptionTabPage, PositionSelectHdl_Impl));
+    m_xCB_OPTIMAL->connect_toggled(LINK(this, SvxCaptionTabPage, LineOptHdl_Impl));
+}
+
+SvxCaptionTabPage::~SvxCaptionTabPage()
+{
+    m_xCT_CAPTTYPEWin.reset();
+    m_xCT_CAPTTYPE.reset();
+}
+
+void SvxCaptionTabPage::Construct()
+{
+    // set rectangle and working area
+    DBG_ASSERT( pView, "No valid View transferred!" );
+}
+
+bool SvxCaptionTabPage::FillItemSet( SfxItemSet*  _rOutAttrs)
+{
+    SfxItemPool*    pPool = _rOutAttrs->GetPool();
+    DBG_ASSERT( pPool, "Where is the pool?" );
+
+    MapUnit      eUnit;
+
+    nCaptionType = static_cast<SdrCaptionType>(m_xCT_CAPTTYPE->GetSelectedItemId()-1);
+
+    _rOutAttrs->Put( SdrCaptionTypeItem( nCaptionType ) );
+
+    if (m_xMF_SPACING->get_value_changed_from_saved())
+    {
+        eUnit = pPool->GetMetric( GetWhich( SDRATTR_CAPTIONGAP ) );
+        _rOutAttrs->Put( SdrCaptionGapItem( GetCoreValue(*m_xMF_SPACING, eUnit ) ) );
+    }
+
+    // special treatment!!! XXX
+    if( nCaptionType==SdrCaptionType::Type1 )
+    {
+        switch( nEscDir )
+        {
+            case SdrCaptionEscDir::Horizontal:     nEscDir=SdrCaptionEscDir::Vertical;break;
+            case SdrCaptionEscDir::Vertical:       nEscDir=SdrCaptionEscDir::Horizontal;break;
+            default: break;
+        }
+    }
+
+    _rOutAttrs->Put( SdrCaptionEscDirItem( nEscDir ) );
+
+    bEscRel = m_xLB_POSITION->get_visible();
+    _rOutAttrs->Put( SdrCaptionEscIsRelItem( bEscRel ) );
+
+    if( bEscRel )
+    {
+        tools::Long    nVal = 0;
+
+        switch (m_xLB_POSITION->get_active())
+        {
+            case POS_TOP:     nVal=0;break;
+            case POS_MIDDLE:  nVal=5000;break;
+            case POS_BOTTOM:  nVal=10000;break;
+        }
+        _rOutAttrs->Put( SdrCaptionEscRelItem( nVal ) );
+    }
+    else
+    {
+        if (m_xMF_BY->get_value_changed_from_saved())
+        {
+            eUnit = pPool->GetMetric( GetWhich( SDRATTR_CAPTIONESCABS ) );
+            _rOutAttrs->Put( SdrCaptionEscAbsItem( GetCoreValue(*m_xMF_BY, eUnit ) ) );
+        }
+    }
+
+    bFitLineLen = m_xCB_OPTIMAL->get_active();
+    _rOutAttrs->Put( SdrCaptionFitLineLenItem( bFitLineLen ) );
+
+    if( ! bFitLineLen )
+    {
+        if (m_xMF_LENGTH->get_value_changed_from_saved())
+        {
+            eUnit = pPool->GetMetric( GetWhich( SDRATTR_CAPTIONLINELEN ) );
+            _rOutAttrs->Put( SdrCaptionLineLenItem( GetCoreValue(*m_xMF_LENGTH, eUnit ) ) );
+        }
+    }
+
+//NYI-------------the angles have to be added here!!! XXX----------------------
+
+    return true;
+}
+
+void SvxCaptionTabPage::Reset( const SfxItemSet*  )
+{
+
+    //------------set metric-----------------------------
+
+    FieldUnit eFUnit = GetModuleFieldUnit( rOutAttrs );
+
+    switch ( eFUnit )
+    {
+        case FieldUnit::CM:
+        case FieldUnit::M:
+        case FieldUnit::KM:
+            eFUnit = FieldUnit::MM;
+            break;
+        default: ;//prevent warning
+    }
+    SetFieldUnit( *m_xMF_SPACING, eFUnit );
+    SetFieldUnit( *m_xMF_BY, eFUnit );
+    SetFieldUnit( *m_xMF_LENGTH, eFUnit );
+
+    SfxItemPool*    pPool = rOutAttrs.GetPool();
+    DBG_ASSERT( pPool, "Where is the pool?" );
+
+    sal_uInt16   nWhich;
+    MapUnit      eUnit;
+
+    nWhich = GetWhich( SDRATTR_CAPTIONESCABS );
+    eUnit = pPool->GetMetric( nWhich );
+    nEscAbs = static_cast<const SdrCaptionEscAbsItem&>( rOutAttrs.Get( nWhich ) ).GetValue();
+    SetMetricValue( *m_xMF_BY, nEscAbs, eUnit );
+    nEscAbs = m_xMF_BY->get_value(FieldUnit::NONE);
+
+    nWhich = GetWhich( SDRATTR_CAPTIONESCREL );
+    nEscRel = static_cast<tools::Long>(static_cast<const SdrCaptionEscRelItem&>( rOutAttrs.Get( nWhich ) ).GetValue());
+
+    //------- line length ----------
+    nWhich = GetWhich( SDRATTR_CAPTIONLINELEN );
+    eUnit = pPool->GetMetric( nWhich );
+    nLineLen = static_cast<const SdrCaptionLineLenItem&>( rOutAttrs.Get( nWhich ) ).GetValue();
+    SetMetricValue( *m_xMF_LENGTH, nLineLen, eUnit );
+    nLineLen = m_xMF_LENGTH->get_value(FieldUnit::NONE);
+
+    //------- distance to box ----------
+    nWhich = GetWhich( SDRATTR_CAPTIONGAP );
+    eUnit = pPool->GetMetric( nWhich );
+    nGap = static_cast<const SdrCaptionGapItem&>( rOutAttrs.Get( nWhich ) ).GetValue();
+    SetMetricValue( *m_xMF_SPACING, nGap, eUnit );
+    nGap = m_xMF_SPACING->get_value(FieldUnit::NONE);
+
+    nCaptionType = rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONTYPE ) ).GetValue();
+    bFitLineLen = static_cast<const SfxBoolItem&>( rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONFITLINELEN ) ) ).GetValue();
+    nEscDir = rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONESCDIR ) ).GetValue();
+    bEscRel = static_cast<const SfxBoolItem&>( rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONESCISREL ) ) ).GetValue();
+
+    // special treatment!!! XXX
+    if( nCaptionType==SdrCaptionType::Type1 )
+    {
+        switch( nEscDir )
+        {
+            case SdrCaptionEscDir::Horizontal:     nEscDir=SdrCaptionEscDir::Vertical;break;
+            case SdrCaptionEscDir::Vertical:       nEscDir=SdrCaptionEscDir::Horizontal;break;
+            default: break;
+        }
+    }
+
+    nPosition = POS_MIDDLE;
+    nExtension = EXT_OPTIMAL;
+
+    m_xMF_SPACING->set_value(nGap, FieldUnit::NONE);
+
+    if( nEscDir == SdrCaptionEscDir::Horizontal )
+    {
+        if( bEscRel )
+        {
+            if( nEscRel < 3333 )
+                nPosition = POS_TOP;
+            if( nEscRel > 6666 )
+                nPosition = POS_BOTTOM;
+            nExtension = EXT_HORIZONTAL;
+        }
+        else
+        {
+            nExtension = EXT_FROM_TOP;
+            m_xMF_BY->set_value(nEscAbs, FieldUnit::NONE);
+        }
+    }
+    else if( nEscDir == SdrCaptionEscDir::Vertical )
+    {
+        if( bEscRel )
+        {
+            if( nEscRel < 3333 )
+                nPosition = POS_TOP;
+            if( nEscRel > 6666 )
+                nPosition = POS_BOTTOM;
+            nExtension = EXT_VERTICAL;
+        }
+        else
+        {
+            nExtension = EXT_FROM_LEFT;
+            m_xMF_BY->set_value(nEscAbs, FieldUnit::NONE);
+        }
+    }
+    else if( nEscDir == SdrCaptionEscDir::BestFit )
+    {
+        nExtension = EXT_OPTIMAL;
+    }
+
+    m_xCB_OPTIMAL->set_active(bFitLineLen);
+    m_xMF_LENGTH->set_value(nLineLen, FieldUnit::NONE);
+
+    m_xLB_EXTENSION->set_active(nExtension);
+
+    SetupExtension_Impl( nExtension );
+    m_xCT_CAPTTYPE->SelectItem( static_cast<int>(nCaptionType)+1 ); // Enum starts at 0!
+    SetupType_Impl( nCaptionType );
+}
+
+std::unique_ptr<SfxTabPage> SvxCaptionTabPage::Create(weld::Container* pPage, weld::DialogController* pController,
+                                             const SfxItemSet* rOutAttrs)
+{
+    return std::make_unique<SvxCaptionTabPage>(pPage, pController, *rOutAttrs);
+}
+
+void SvxCaptionTabPage::SetupExtension_Impl( sal_uInt16 nType )
+{
+    switch( nType )
+    {
+        case EXT_OPTIMAL:
+        m_xMF_BY->show();
+        m_xFT_BYFT->show();
+        m_xFT_POSITIONFT->hide();
+        m_xLB_POSITION->hide();
+        nEscDir = SdrCaptionEscDir::BestFit;
+        break;
+
+        case EXT_FROM_TOP:
+        m_xMF_BY->show();
+        m_xFT_BYFT->show();
+        m_xFT_POSITIONFT->hide();
+        m_xLB_POSITION->hide();
+        nEscDir = SdrCaptionEscDir::Horizontal;
+        break;
+
+        case EXT_FROM_LEFT:
+        m_xMF_BY->show();
+        m_xFT_BYFT->show();
+        m_xFT_POSITIONFT->hide();
+        m_xLB_POSITION->hide();
+        nEscDir = SdrCaptionEscDir::Vertical;
+        break;
+
+        case EXT_HORIZONTAL:
+        m_xLB_POSITION->clear();
+        for (const OUString & i : m_aStrHorzList)
+            m_xLB_POSITION->append_text(i);
+        m_xLB_POSITION->set_active(nPosition);
+
+        m_xMF_BY->hide();
+        m_xFT_BYFT->hide();
+        m_xFT_POSITIONFT->show();
+        m_xLB_POSITION->show();
+        nEscDir = SdrCaptionEscDir::Horizontal;
+        break;
+
+        case EXT_VERTICAL:
+        m_xLB_POSITION->clear();
+        for (const OUString & i : m_aStrVertList)
+            m_xLB_POSITION->append_text(i);
+        m_xLB_POSITION->set_active(nPosition);
+
+        m_xMF_BY->hide();
+        m_xFT_BYFT->hide();
+        m_xFT_POSITIONFT->show();
+        m_xLB_POSITION->show();
+        nEscDir = SdrCaptionEscDir::Vertical;
+        break;
+    }
+}
+
+IMPL_LINK(SvxCaptionTabPage, ExtensionSelectHdl_Impl, weld::ComboBox&, rListBox, void)
+{
+    if (&rListBox == m_xLB_EXTENSION.get())
+    {
+        SetupExtension_Impl(m_xLB_EXTENSION->get_active());
+    }
+}
+
+IMPL_LINK(SvxCaptionTabPage, PositionSelectHdl_Impl, weld::ComboBox&, rListBox, void)
+{
+    if (&rListBox == m_xLB_POSITION.get())
+    {
+        nPosition = m_xLB_POSITION->get_active();
+    }
+}
+
+IMPL_LINK( SvxCaptionTabPage, LineOptHdl_Impl, weld::Toggleable&, rButton, void )
+{
+    if (&rButton != m_xCB_OPTIMAL.get())
+        return;
+
+    if (m_xCB_OPTIMAL->get_active() || !m_xCB_OPTIMAL->get_sensitive())
+    {
+        m_xFT_LENGTHFT->set_sensitive(false);
+        m_xMF_LENGTH->set_sensitive(false);
+    }
+    else
+    {
+        m_xFT_LENGTHFT->set_sensitive(true);
+        m_xMF_LENGTH->set_sensitive(true);
+    }
+}
+
+IMPL_LINK_NOARG(SvxCaptionTabPage, SelectCaptTypeHdl_Impl, ValueSet*, void)
+{
+    SetupType_Impl( static_cast<SdrCaptionType>(m_xCT_CAPTTYPE->GetSelectedItemId()) );
+}
+
+void SvxCaptionTabPage::SetupType_Impl( SdrCaptionType nType )
+{
+    switch( nType )
+    {
+        case SdrCaptionType::Type1:
+        case SdrCaptionType::Type2:
+            m_xFT_LENGTHFT->set_sensitive(false);
+            m_xCB_OPTIMAL->set_sensitive(false);
+            LineOptHdl_Impl(*m_xCB_OPTIMAL);
+            break;
+        case SdrCaptionType::Type3:
+        case SdrCaptionType::Type4:
+            m_xFT_LENGTHFT->set_sensitive(true);
+            m_xCB_OPTIMAL->set_sensitive(true);
+            LineOptHdl_Impl(*m_xCB_OPTIMAL);
+            break;
+    }
+}
+
+void SvxCaptionTabPage::FillValueSet()
+{
+    m_xCT_CAPTTYPE->SetItemImage(BMP_CAPTTYPE_1, m_aBmpCapTypes[0] );
+    m_xCT_CAPTTYPE->SetItemImage(BMP_CAPTTYPE_2, m_aBmpCapTypes[1] );
+    m_xCT_CAPTTYPE->SetItemImage(BMP_CAPTTYPE_3, m_aBmpCapTypes[2] );
+}
+
+SvxCaptionTabDialog::SvxCaptionTabDialog(weld::Window* pParent, const SdrView* pSdrView,
+    SvxAnchorIds nAnchorTypes)
+    : SfxTabDialogController(pParent, "cui/ui/calloutdialog.ui", "CalloutDialog")
+    , pView(pSdrView)
+    , nAnchorCtrls(nAnchorTypes)
+{
+    assert(pView); // No valid View transferred!
+
+    //different positioning page in Writer
+    if (nAnchorCtrls & (SvxAnchorIds::Paragraph | SvxAnchorIds::Character | SvxAnchorIds::Page | SvxAnchorIds::Fly))
+    {
+        AddTabPage("RID_SVXPAGE_SWPOSSIZE", SvxSwPosSizeTabPage::Create,
+            SvxSwPosSizeTabPage::GetRanges );
+        RemoveTabPage("RID_SVXPAGE_POSITION_SIZE");
+    }
+    else
+    {
+        AddTabPage("RID_SVXPAGE_POSITION_SIZE", SvxPositionSizeTabPage::Create,
+            SvxPositionSizeTabPage::GetRanges );
+        RemoveTabPage("RID_SVXPAGE_SWPOSSIZE");
+    }
+    AddTabPage("RID_SVXPAGE_CAPTION", SvxCaptionTabPage::Create,
+        SvxCaptionTabPage::GetRanges );
+}
+
+void SvxCaptionTabDialog::PageCreated(const OString& rId, SfxTabPage &rPage)
+{
+    if (rId == "RID_SVXPAGE_POSITION_SIZE")
+    {
+        static_cast<SvxPositionSizeTabPage&>( rPage ).SetView( pView );
+        static_cast<SvxPositionSizeTabPage&>( rPage ).Construct();
+        if( nAnchorCtrls & SvxAnchorIds::NoResize )
+            static_cast<SvxPositionSizeTabPage&>( rPage ).DisableResize();
+
+        if( nAnchorCtrls & SvxAnchorIds::NoProtect )
+            static_cast<SvxPositionSizeTabPage&>( rPage ).DisableProtect();
+    }
+    else if (rId == "RID_SVXPAGE_SWPOSSIZE")
+    {
+        SvxSwPosSizeTabPage& rSwPage = static_cast<SvxSwPosSizeTabPage&>(rPage);
+        rSwPage.EnableAnchorTypes(nAnchorCtrls);
+        rSwPage.SetValidateFramePosLink( aValidateLink );
+    }
+    else if (rId == "RID_SVXPAGE_CAPTION")
+    {
+        static_cast<SvxCaptionTabPage&>( rPage ).SetView( pView );
+        static_cast<SvxCaptionTabPage&>( rPage ).Construct();
+    }
+}
+
+void SvxCaptionTabDialog::SetValidateFramePosLink( const Link<SvxSwFrameValidation&,void>& rLink )
+{
+    aValidateLink = rLink;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */