Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 147 insertions, 0 deletions

diff --git a/include/basegfx/polygon/b2dlinegeometry.hxx b/include/basegfx/polygon/b2dlinegeometry.hxx
new file mode 100644
index 000000000..e12dd7498
--- /dev/null
+++ b/include/basegfx/polygon/b2dlinegeometry.hxx
@@ -0,0 +1,147 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#pragma once
+
+#include <basegfx/numeric/ftools.hxx>
+#include <basegfx/polygon/b2dpolypolygon.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <com/sun/star/drawing/LineCap.hpp>
+#include <basegfx/basegfxdllapi.h>
+#include <basegfx/polygon/b2dpolygontriangulator.hxx>
+
+namespace basegfx::utils
+{
+        /** Create line start/end geometry element, mostly arrows and things like that.
+
+            @param rCandidate
+            The polygon which needs to get that line ends and needs to have two points
+            at least.
+
+            @param rArrow
+            The line start/end geometry. It is assumed that the tip is pointing
+            upwards. Result will be rotated and scaled to fit.
+
+            @param bStart
+            describes if creation is for start or end of candidate.
+
+            @param fWidth
+            defines the size of the element, it's describing the target width in X
+            of the arrow.
+
+            @param fDockingPosition needs to be in [0.0 ..1.0] range, where 0.0 means
+            that the tip of the arrow will be aligned with the polygon start, 1.0 means
+            the bottom. The default of 0.5 describes a centered arrow.
+
+            @param pConsumedLength
+            Using this parameter it is possible to get back how much from the candidate
+            geometry is overlapped by the created element (consumed).
+
+            @param fCandidateLength
+            This should contain the length of rCandidate to allow work without
+            again calculating the length (which may be expensive with beziers). If 0.0 is
+            given, the length is calculated on demand.
+
+            @param fShift
+            When it is necessary to count with the thickness of the line, it
+            makes sense to move the start position slightly - so define the shift.
+
+            @return
+            The Line start and end polygon, correctly rotated and scaled
+        */
+        BASEGFX_DLLPUBLIC B2DPolyPolygon createAreaGeometryForLineStartEnd(
+            const B2DPolygon& rCandidate,
+            const B2DPolyPolygon& rArrow,
+            bool bStart,
+            double fWidth,
+            double fCandidateLength, // 0.0 -> calculate self
+            double fDockingPosition, // 0->top, 1->bottom
+            double* pConsumedLength = nullptr,
+            double fShift = 0.0);
+
+        /** create filled polygon geometry for lines with a line width
+
+            This method will create bezier based, fillable polygons which
+            will resample the curve if it was extended for the given half
+            line width. It will remove extrema positions from contained
+            bezier segments and get as close as possible and defined by
+            the given parameters to the ideal result.
+
+            It will check edges for trivial bezier to avoid unnecessary
+            bezier polygons. Care is taken to produce the in-between
+            polygon points (the ones original on the source polygon) since
+            it has showed that without those, the raster converters leave
+            non-filled gaps.
+
+            @param rCandidate
+            The source polygon defining the hairline polygon path
+
+            @param fHalfLineWidth
+            The width of the line to one side
+
+            @param eJoin
+            The LineJoin if the edges meeting in a point do not have a C1
+            or C2 continuity
+
+            @param eCap
+            The kind of cap, which is added to the line.
+
+            @param fMaxAllowedAngle
+            Allows to hand over the maximum allowed angle between an edge and
+            it's control vectors. The smaller, the more subdivisions will be
+            needed to create the filled geometry. Allowed range is cropped to
+            [M_PI_2 .. 0.01 * M_PI_2].
+
+            @param fMaxPartOfEdge
+            Allows to influence from with relative length of a control vector
+            compared to its edge a split is forced. The smaller, the more
+            subdivisions will be needed to create the filled geometry. Allowed
+            range is cropped to [1.0 .. 0.01]
+
+            @param fMiterMinimumAngle
+            The minimum wanted angle between two edges when edge rounding
+            is using miter. When an edge is smaller than this (tighter)
+            the usual fallback to bevel is used. Allowed range is cropped
+            to [M_PI .. 0.01 * M_PI].
+
+            Commit 51b5b93092d6231615de470c62494c24e54828a1 needs
+            revert, we need the triangulation for X11 fat line drawing
+
+            @param pTriangles
+            If given, the method will additionally add the created geometry as
+            B2DTriangle's
+
+            @return
+            The tools::PolyPolygon containing the geometry of the extended line by
+            it's line width. Contains bezier segments and edge roundings as
+            needed and defined.
+        */
+        BASEGFX_DLLPUBLIC B2DPolyPolygon createAreaGeometry(
+            const B2DPolygon& rCandidate,
+            double fHalfLineWidth,
+            B2DLineJoin eJoin,
+            css::drawing::LineCap eCap,
+            double fMaxAllowedAngle = basegfx::deg2rad(12.5),
+            double fMaxPartOfEdge = 0.4,
+            double fMiterMinimumAngle = basegfx::deg2rad(15.0),
+            basegfx::triangulator::B2DTriangleVector* pTriangles = nullptr);
+
+} // end of namespace basegfx::utils
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */