Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 862 insertions, 0 deletions

diff --git a/include/osl/socket.h b/include/osl/socket.h
new file mode 100644
index 000000000..7f87da312
--- /dev/null
+++ b/include/osl/socket.h
@@ -0,0 +1,862 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+/*
+ * This file is part of LibreOffice published API.
+ */
+
+#ifndef INCLUDED_OSL_SOCKET_H
+#define INCLUDED_OSL_SOCKET_H
+
+#include "rtl/ustring.h"
+#include "osl/time.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* error returns */
+#define OSL_INADDR_NONE             0xffffffff
+#define OSL_INVALID_PORT (-1)
+
+/**@{ begin section types
+*/
+
+/**
+    Opaque datatype SocketAddr.
+*/
+typedef struct oslSocketAddrImpl * oslSocketAddr;
+
+/**
+    Represents the address-family of a socket
+*/
+typedef enum {
+    osl_Socket_FamilyInet,          /*!< IP (AF_INET)                           */
+    osl_Socket_FamilyIpx,           /*!< Novell IPX/SPX (AF_IPX)                */
+    osl_Socket_FamilyInvalid,       /*!< always last entry in enum!             */
+    osl_Socket_Family_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslAddrFamily;
+
+/**
+    represent a specific protocol within an address-family
+*/
+typedef enum {
+    osl_Socket_ProtocolIp,          /*!< for all af_inet                        */
+    osl_Socket_ProtocolIpx,         /*!< af_ipx datagram sockets (IPX)          */
+    osl_Socket_ProtocolSpx,         /*!< af_ipx seqpacket or stream for SPX     */
+    osl_Socket_ProtocolSpxII,       /*!< af_ipx seqpacket or stream for SPX II  */
+    osl_Socket_ProtocolInvalid,     /*!< always last entry in enum              */
+    osl_Socket_Protocol_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslProtocol;
+
+/**
+    Represents the type of a socket
+*/
+typedef enum {
+    osl_Socket_TypeStream,          /*!< stream socket                          */
+    osl_Socket_TypeDgram,           /*!< datagram socket                        */
+    osl_Socket_TypeRaw,             /*!< raw socket                             */
+    osl_Socket_TypeRdm,             /*!< connectionless, message-oriented,
+                                         reliably delivered message (RDM)
+                                         sockets                                */
+    osl_Socket_TypeSeqPacket,       /*!< connection-oriented and reliable
+                                         two-way transport of ordered byte
+                                         streams                                */
+    osl_Socket_TypeInvalid,         /*!< always last entry in enum              */
+    osl_Socket_Type_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslSocketType;
+
+
+/**
+    Represents socket-options
+*/
+typedef enum {
+    osl_Socket_OptionDebug,         /*!< record debugging info                  */
+    osl_Socket_OptionAcceptConn,    /*!< listen for connection                  */
+    osl_Socket_OptionReuseAddr,     /*!< bind to address already in use         */
+    osl_Socket_OptionKeepAlive,     /*!< use keep-alive                         */
+    osl_Socket_OptionDontRoute,     /*!< do not route packet, send direct to
+                                         interface addresses                    */
+    osl_Socket_OptionBroadcast,     /*!< send broadcast message                 */
+    osl_Socket_OptionUseLoopback,   /*!< socket receives copy of everything
+                                         sent on the socket                     */
+    osl_Socket_OptionLinger,        /*!< don't immediately close - "linger"
+                                         a while to allow for graceful
+                                         connection closure                     */
+    osl_Socket_OptionOOBinLine,     /*!< out-of-band (OOB) data placed in
+                                         normal input queue (i.e. OOB inline)   */
+    osl_Socket_OptionSndBuf,        /*!< send buffer                            */
+    osl_Socket_OptionRcvBuf,        /*!< receive buffer                         */
+    osl_Socket_OptionSndLowat,      /*!< send "low-water" mark - amount of
+                                         available space in send buffer for
+                                         select() to return "writable"          */
+    osl_Socket_OptionRcvLowat,      /*!< receive "low-water" mark - amount of
+                                         available space in receive buffer
+                                         for select() to receive "readable"     */
+    osl_Socket_OptionSndTimeo,      /*!< send timeout                           */
+    osl_Socket_OptionRcvTimeo,      /*!< receive timeout                        */
+    osl_Socket_OptionError,         /*!< socket error                           */
+    osl_Socket_OptionType,          /*!< returns socket type (e.g. datagram,
+                                         stream).                               */
+    osl_Socket_OptionTcpNoDelay,    /*!< disable TCP Nagle algorithm            */
+    osl_Socket_OptionInvalid,       /*!< always last entry in enum              */
+    osl_Socket_Option_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslSocketOption;
+
+/**
+    Represents the different socket-option levels
+*/
+typedef enum  {
+    osl_Socket_LevelSocket,
+    osl_Socket_LevelTcp,
+    osl_Socket_LevelInvalid,        /*!< always last entry in enum              */
+    osl_Socket_Level_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslSocketOptionLevel;
+
+/**
+    Represents flags to be used with send/recv-calls.
+*/
+typedef enum {
+    osl_Socket_MsgNormal,
+    osl_Socket_MsgOOB,
+    osl_Socket_MsgPeek,
+    osl_Socket_MsgDontRoute,
+    osl_Socket_MsgMaxIOVLen,
+    osl_Socket_MsgInvalid,          /*!< always last entry in enum              */
+    osl_Socket_Msg_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslSocketMsgFlag;
+
+/**
+    Used by shutdown to denote which end of the socket to "close".
+*/
+typedef enum {
+    osl_Socket_DirRead,
+    osl_Socket_DirWrite,
+    osl_Socket_DirReadWrite,
+    osl_Socket_DirInvalid,          /*!< always last entry in enum              */
+    osl_Socket_Dir_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslSocketDirection;
+
+/** Describes the various error socket error conditions, which may
+    occur */
+typedef enum {
+    osl_Socket_E_None,              /*!< no error                               */
+    osl_Socket_E_NotSocket,         /*!< Socket operation on non-socket         */
+    osl_Socket_E_DestAddrReq,       /*!< Destination address required           */
+    osl_Socket_E_MsgSize,           /*!< Message too long                       */
+    osl_Socket_E_Prototype,         /*!< Protocol wrong type for socket         */
+    osl_Socket_E_NoProtocol,        /*!< Protocol not available                 */
+    osl_Socket_E_ProtocolNoSupport, /*!< Protocol not supported                 */
+    osl_Socket_E_TypeNoSupport,     /*!< Socket type not supported              */
+    osl_Socket_E_OpNotSupport,      /*!< Operation not supported on socket      */
+    osl_Socket_E_PfNoSupport,       /*!< Protocol family not supported          */
+    osl_Socket_E_AfNoSupport,       /*!< Address family not supported by        */
+                                    /*!< protocol family                        */
+    osl_Socket_E_AddrInUse,         /*!< Address already in use                 */
+    osl_Socket_E_AddrNotAvail,      /*!< Can't assign requested address         */
+    osl_Socket_E_NetDown,           /*!< Network is down                        */
+    osl_Socket_E_NetUnreachable,    /*!< Network is unreachable                 */
+    osl_Socket_E_NetReset,          /*!< Network dropped connection because
+                                       of reset                                 */
+    osl_Socket_E_ConnAborted,       /*!< Software caused connection abort       */
+    osl_Socket_E_ConnReset,         /*!< Connection reset by peer               */
+    osl_Socket_E_NoBufferSpace,     /*!< No buffer space available              */
+    osl_Socket_E_IsConnected,       /*!< Socket is already connected            */
+    osl_Socket_E_NotConnected,      /*!< Socket is not connected                */
+    osl_Socket_E_Shutdown,          /*!< Can't send after socket shutdown       */
+    osl_Socket_E_TooManyRefs,       /*!< Too many references: can't splice      */
+    osl_Socket_E_TimedOut,          /*!< Connection timed out                   */
+    osl_Socket_E_ConnRefused,       /*!< Connection refused                     */
+    osl_Socket_E_HostDown,          /*!< Host is down                           */
+    osl_Socket_E_HostUnreachable,   /*!< No route to host                       */
+    osl_Socket_E_WouldBlock,        /*!< call would block on non-blocking socket */
+    osl_Socket_E_Already,           /*!< operation already in progress          */
+    osl_Socket_E_InProgress,        /*!< operation now in progress              */
+    osl_Socket_E_InvalidError,      /*!< unmapped error: always last entry in enum */
+    osl_Socket_E_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslSocketError;
+
+/** Common return codes of socket related functions.
+ */
+typedef enum {
+    osl_Socket_Ok,                  /*!< successful completion                  */
+    osl_Socket_Error,               /*!< error occurred, check
+                                         osl_getLastSocketError() for details   */
+    osl_Socket_TimedOut,            /*!< blocking operation timed out           */
+    osl_Socket_Interrupted,         /*!< blocking operation was interrupted     */
+    osl_Socket_InProgress,          /*!< nonblocking operation is in progress   */
+    osl_Socket_FORCE_EQUAL_SIZE = SAL_MAX_ENUM
+} oslSocketResult;
+
+typedef sal_uInt8 oslSocketIpxNetNumber[4];
+typedef sal_uInt8 oslSocketIpxNodeNumber[6];
+
+/**@} end section types
+*/
+
+/**@{ begin section oslSocket
+*/
+
+typedef struct oslSocketImpl * oslSocket;
+
+/** Create a socket of the specified Family and Type. The semantic of
+    the Protocol parameter depends on the given family and type.
+
+    @returns 0 if socket could not be created, otherwise you get a handle
+             to the allocated socket-datastructure.
+*/
+SAL_DLLPUBLIC oslSocket SAL_CALL osl_createSocket(
+                            oslAddrFamily Family,
+                            oslSocketType Type,
+                            oslProtocol Protocol);
+
+/** increases the refcount of the socket handle by one
+ */
+SAL_DLLPUBLIC void SAL_CALL osl_acquireSocket(oslSocket Socket);
+
+/** decreases the refcount of the socket handle by one.
+
+    If the refcount drops to zero, the underlying socket handle
+    is destroyed and becomes invalid.
+ */
+SAL_DLLPUBLIC void SAL_CALL osl_releaseSocket(oslSocket Socket);
+
+/** Retrieves the Address of the local end of the socket.
+    Note that a socket must be bound or connected before
+    a valid address can be returned.
+
+    @returns 0 if socket-address could not be created, otherwise you get
+             the created Socket-Address.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_getLocalAddrOfSocket(oslSocket Socket);
+
+/** Retrieves the Address of the remote end of the socket.
+    Note that a socket must be connected before
+    a valid address can be returned.
+    @retval 0 if socket-address could not be created, otherwise you get
+    the created Socket-Address.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_getPeerAddrOfSocket(oslSocket Socket);
+
+/** Binds the given address to the socket.
+    @param[in] Socket
+    @param[in] Addr
+    @retval sal_False if the bind failed
+    @retval sal_True if bind is successful
+    @see osl_getLastSocketError()
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_bindAddrToSocket(
+                           oslSocket Socket,
+                           oslSocketAddr Addr);
+
+/** Connects the socket to the given address.
+
+    @param[in] Socket a bound socket.
+    @param[in] Addr the peer address.
+    @param pTimeout Timeout value or NULL for blocking.
+
+    @retval osl_Socket_Ok on successful connection,
+    @retval osl_Socket_TimedOut if operation timed out,
+    @retval osl_Socket_Interrupted if operation was interrupted
+    @retval osl_Socket_Error if the connection failed.
+*/
+SAL_DLLPUBLIC oslSocketResult SAL_CALL osl_connectSocketTo(
+                              oslSocket Socket,
+                              oslSocketAddr Addr,
+                              const TimeValue* pTimeout);
+
+
+/** Prepares the socket to act as an acceptor of incoming connections.
+    You should call "listen" before you use "accept".
+    @param[in] Socket The socket to listen on.
+    @param[in] MaxPendingConnections denotes the length of the queue of
+    pending connections for this socket. If MaxPendingConnections is
+    -1, the systems default value will be used (Usually 5).
+    @retval sal_False if the listen failed.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_listenOnSocket(
+                            oslSocket Socket,
+                            sal_Int32 MaxPendingConnections);
+
+
+/** Waits for an ingoing connection on the socket.
+    This call blocks if there is no incoming connection present.
+    @param[in] Socket The socket to accept the connection on.
+    @param[in] pAddr if pAddr is != 0, the peers address is returned.
+    @retval 0 if the accept-call failed, otherwise you get a socket
+    representing the new connection.
+*/
+SAL_DLLPUBLIC oslSocket SAL_CALL osl_acceptConnectionOnSocket(
+                            oslSocket Socket,
+                            oslSocketAddr* pAddr);
+
+/** Tries to receive BytesToRead data from the connected socket,
+    if no error occurs. Note that incomplete recvs due to
+    packet boundaries may occur.
+
+    @param[in] Socket A connected socket to be used to listen on.
+    @param[out] pBuffer Points to a buffer that will be filled with the received
+    data.
+    @param[in] BytesToRead The number of bytes to read. pBuffer must have at least
+    this size.
+    @param[in] Flag Modifier for the call. Valid values are:
+    osl_Socket_MsgNormal
+    osl_Socket_MsgOOB
+    osl_Socket_MsgPeek
+    osl_Socket_MsgDontRoute
+    osl_Socket_MsgMaxIOVLen
+
+    @return the number of received bytes.
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_receiveSocket(
+                            oslSocket Socket,
+                            void* pBuffer,
+                            sal_uInt32 BytesToRead,
+                            oslSocketMsgFlag Flag);
+
+/** Tries to receives BufferSize data from the (usually unconnected)
+    (datagram-)socket, if no error occurs.
+
+    @param[in] Socket A bound socket to be used to listen for a datagram.
+    @param[out] SenderAddr A pointer to a created oslSocketAddr handle
+    or to a null handle. After the call, it will contain the constructed
+    oslSocketAddr of the datagrams sender. If pSenderAddr itself is 0,
+    it is ignored.
+    @param[out] pBuffer Points to a buffer that will be filled with the received
+    datagram.
+    @param[in] BufferSize The size of pBuffer.
+    @param[in] Flag Modifier for the call. Valid values are:
+    osl_Socket_MsgNormal
+    osl_Socket_MsgOOB
+    osl_Socket_MsgPeek
+    osl_Socket_MsgDontRoute
+    osl_Socket_MsgMaxIOVLen
+
+    @return the number of received bytes.
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_receiveFromSocket(
+                            oslSocket Socket,
+                            oslSocketAddr SenderAddr,
+                            void* pBuffer,
+                            sal_uInt32 BufferSize,
+                            oslSocketMsgFlag Flag);
+
+/** Tries to send BytesToSend data from the connected socket,
+    if no error occurs.
+
+    @param[in] Socket A connected socket.
+    @param[in] pBuffer Points to a buffer that contains the send-data.
+    @param[in] BytesToSend The number of bytes to send. pBuffer must have at least
+    this size.
+    @param[in] Flag Modifier for the call. Valid values are:
+    @li osl_Socket_MsgNormal
+    @li osl_Socket_MsgOOB
+    @li osl_Socket_MsgPeek
+    @li osl_Socket_MsgDontRoute
+    @li osl_Socket_MsgMaxIOVLen
+
+    @return the number of transferred bytes.
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_sendSocket(
+                            oslSocket Socket,
+                            const void* pBuffer,
+                            sal_uInt32 BytesToSend,
+                            oslSocketMsgFlag Flag);
+
+/** Tries to send one datagram with BytesToSend data to the given ReceiverAddr
+    via the (implicitly unconnected) datagram-socket.
+    Since there is only sent one packet, the function sends the data always complete
+    even with incomplete packet boundaries.
+
+    @param[in] Socket A bound or unbound socket. Socket will be bound
+    after a successful call.
+
+    @param[in] ReceiverAddr An initialized oslSocketAddress that contains
+    the destination address for this send.
+
+    @param[in] pBuffer Points to a buffer that contains the send-data.
+    @param[in] BytesToSend The number of bytes to send. pBuffer must have at least
+    this size.
+    @param[in] Flag
+    @parblock
+        Modifier for the call. Valid values are:
+        @li osl_Socket_MsgNormal
+        @li osl_Socket_MsgOOB
+        @li osl_Socket_MsgPeek
+        @li osl_Socket_MsgDontRoute
+        @li osl_Socket_MsgMaxIOVLen
+    @endparblock
+
+    @return the number of transferred bytes.
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_sendToSocket(
+                            oslSocket Socket,
+                            oslSocketAddr ReceiverAddr,
+                            const void* pBuffer,
+                            sal_uInt32 BytesToSend,
+                            oslSocketMsgFlag Flag);
+
+/** Checks if read operations will block.
+
+    You can specify a timeout-value in seconds/microseconds that denotes
+    how long the operation will block if the Socket is not ready.
+
+    @param Socket the Socket to perform the operation on.
+    @param pTimeout if NULL, the operation will block without a timeout.
+
+    @retval sal_True if read operations (recv, recvFrom, accept) on the Socket
+        will NOT block;
+    @retval sal_False if it would block or if an error occurred.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_isReceiveReady(
+                            oslSocket Socket,
+                            const TimeValue* pTimeout);
+
+/** Checks if send operations will block.
+    You can specify a timeout-value in seconds/microseconds that denotes
+    how long the operation will block if the Socket is not ready.
+
+    @param Socket the Socket to perform the operation on.
+    @param pTimeout if NULL, the operation will block without a timeout. Otherwise
+        the time define by timeout value.
+
+    @retval sal_True if send operations (send, sendTo) on the Socket
+    will NOT block
+    @retval sal_False if it would block or if an error occurred.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_isSendReady(
+                            oslSocket Socket,
+                            const TimeValue* pTimeout);
+
+/** Checks if a request for out-of-band data will block.
+    You can specify a timeout-value in seconds/microseconds that denotes
+    how long the operation will block if the Socket has no pending OOB data.
+
+    @param Socket the Socket to perform the operation on.
+    @param pTimeout if NULL, the operation will block without a timeout.
+
+    @retval sal_True if OOB-request operations (recv with appropriate flags)
+        on the Socket will NOT block
+    @retval sal_False if it would block or if an error occurred.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_isExceptionPending(
+                            oslSocket Socket,
+                            const TimeValue* pTimeout);
+
+/** Shuts down communication on a connected socket.
+    @param[in] Socket the Socket to perform the operation on.
+    @param[in] Direction
+    @parblock
+        Direction denotes which end of the socket should be closed:
+        @li osl_Socket_DirRead - closes read operations.
+        @li osl_Socket_DirReadWrite - closes write operations.
+        @li osl_Socket_DirWrite - closes read and write operations.
+    @endparblock
+
+    @retval sal_True if the socket could be closed down.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_shutdownSocket(
+                            oslSocket Socket,
+                            oslSocketDirection Direction);
+
+/** Retrieves attributes associated with the socket.
+
+    @param Socket is the socket to query.
+    @param Level
+    @parblock
+        Selects the level for which an option should be queried.
+        Valid values are:
+        @li osl_sol_socket - Socket Level
+        @li osl_sol_tcp - Level of Transmission Control Protocol
+    @endparblock
+
+    @param Option
+    @parblock
+        Denotes the option to query.  Valid values (depending on the Level) are:
+        @li osl_Socket_Option_Debug - (sal_Bool) Socket debug flag 1 = enabled, 0 = disabled.
+        @li osl_Socket_OptionAcceptConn
+        @li osl_Socket_OptionReuseAddr - (sal_Bool) Allows the socket to be bound to an address that is
+            already in use. 1 = multiple bound allowed, 0 = no multiple bounds allowed
+        @li osl_Socket_OptionKeepAlive (sal_Bool) Keepalive packets are sent by the underlying socket.
+            1 = enabled, 0 = disabled
+        @li osl_Socket_OptionDontRoute - (sal_Bool) Do not route: send directly to interface.
+            1 = do not route , 0 = routing possible
+        @li osl_Socket_OptionBroadcast - (sal_Bool) Transmission of broadcast messages are allowed on the socket.
+            1 = transmission allowed, 0 = transmission disallowed
+        @li osl_Socket_OptionUseLoopback
+        @li osl_Socket_OptionLinger (sal_Int32) Linger on close if unsent data is present.
+            0 = linger is off, > 0  = timeout in seconds.
+        @li osl_Socket_OptionOOBinLine
+        @li osl_Socket_OptionSndBuf (sal_Int32) Size of the send buffer in bytes. Data is sent after
+            SndTimeo or when the buffer is full. This allows faster writing to the socket.
+        @li osl_Socket_OptionRcvBuf (sal_Int32) Size of the receive buffer in bytes. Data is sent after
+        SndTimeo or when the buffer is full. This allows faster writing to the socket and larger packet sizes.
+        @li osl_Socket_OptionSndLowat
+        @li osl_Socket_OptionRcvLowat
+        @li osl_Socket_OptionSndTimeo (sal_Int32) Data is sent after this timeout. This allows gathering
+            of data to send larger packages but increases latency times.
+        @li osl_Socket_OptionRcvTimeo
+        @li osl_Socket_OptionError
+        @li osl_Socket_OptionType
+        @li osl_Socket_OptionTcpNoDelay Disables the Nagle algorithm for send coalescing. (Do not
+            collect data until a packet is full, instead send immediately.  This increases network traffic
+            but might improve latency-times.)
+            1 = disables the algorithm, 0 = keeps it enabled.
+
+        If not above mentioned otherwise, the options are only valid for level osl_Socket_LevelSocket.
+    @endparblock
+    @param pBuffer Pointer to a buffer large enough to take the desired attribute-value.
+    @param BufferLen contains the length of the Buffer.
+
+    @return -1 if an error occurred or else the size of the data copied into pBuffer.
+
+    @see osl_setSocketOption()
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_getSocketOption(
+                            oslSocket Socket,
+                            oslSocketOptionLevel Level,
+                            oslSocketOption Option,
+                            void* pBuffer,
+                            sal_uInt32 BufferLen);
+
+/** Sets the sockets attributes.
+
+    @param Socket is the socket to modify.
+    @param Level
+    @parblock
+        selects the level for which an option should be changed.
+        Valid values are:
+        @li osl_sol_socket - Socket Level
+        @li osl_sol_tcp - Level of Transmission Control Protocol
+    @endparblock
+    @param Option denotes the option to modify. See osl_setSocketOption() for more
+        details.
+    @param pBuffer Pointer to a Buffer which contains the attribute-value.
+    @param BufferLen contains the length of the Buffer.
+
+    @retval True if the option could be changed.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_setSocketOption(
+                            oslSocket Socket,
+                            oslSocketOptionLevel Level,
+                            oslSocketOption Option,
+                            void* pBuffer,
+                            sal_uInt32 BufferLen);
+
+/** Enables/disables non-blocking-mode of the socket.
+
+    @param Socket Change mode for this socket.
+    @param On sal_True enables non-blocking mode, sal_False disables non-blocking mode.
+
+    @retval sal_True if mode could be changed.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_enableNonBlockingMode(
+                            oslSocket Socket,
+                            sal_Bool On);
+
+
+/** Query state of non-blocking-mode of the socket.
+
+    @param Socket Query mode for this socket.
+
+    @retval True if non-blocking-mode is enabled.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_isNonBlockingMode(oslSocket Socket);
+
+/** Queries the socket for its type.
+
+    @param[in] Socket The socket to query.
+
+    @retval osl_Socket_TypeStream
+    @retval osl_Socket_TypeDgram
+    @retval osl_Socket_TypeRaw
+    @retval osl_Socket_TypeRdm
+    @retval osl_Socket_TypeSeqPacket
+    @retval osl_invalid_SocketType if an error occurred
+*/
+SAL_DLLPUBLIC oslSocketType SAL_CALL osl_getSocketType(oslSocket Socket);
+
+/** returns  a string which describes the last socket error.
+
+    @param[in] Socket The socket to query.
+    @param[out] strError The string that receives the error message.
+*/
+SAL_DLLPUBLIC void SAL_CALL osl_getLastSocketErrorDescription(
+                            oslSocket Socket,
+                            rtl_uString **strError);
+
+/** Returns a constant describing the last error for the socket system.
+
+    @retval osl_Socket_E_NONE if no error occurred
+    @retval osl_invalid_SocketError if an unknown (unmapped)
+            error occurred, otherwise an enum describing the error.
+*/
+SAL_DLLPUBLIC oslSocketError SAL_CALL osl_getLastSocketError(
+                            oslSocket Socket);
+
+/** Closes the socket terminating any ongoing dataflow.
+
+    @param[in] Socket The socket to close.
+ */
+SAL_DLLPUBLIC void SAL_CALL osl_closeSocket(oslSocket Socket);
+
+
+/** Retrieves n bytes from the stream and copies them into pBuffer.
+    The function avoids incomplete reads due to packet boundaries.
+
+    @param[in] Socket The socket to read from.
+    @param[out] pBuffer receives the read data.
+    @param[out] nSize the number of bytes to read. pBuffer must be large enough
+        to hold the n bytes!
+
+    @return the number of read bytes. The number will only be smaller than
+        n if an exceptional condition (e.g. connection closed) occurs.
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_readSocket(
+                            oslSocket Socket,
+                            void *pBuffer,
+                            sal_Int32 nSize);
+
+
+/** Writes n bytes from pBuffer to the stream. The method avoids
+    incomplete writes due to packet boundaries.
+
+    @param[out] Socket The socket to write to.
+    @param[in] pBuffer contains the data to be written.
+    @param[in] nSize the number of bytes to write.
+
+    @return the number of written bytes. The number will only be smaller than
+        nSize if an exceptional condition (e.g. connection closed) occurs.
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_writeSocket(
+                            oslSocket Socket,
+                            const void *pBuffer,
+                            sal_Int32 nSize);
+
+/**@} end section oslSocket
+*/
+/**@{ begin section oslSocketAddr
+*/
+
+/** Creates a socket-address for the given family.
+    @param Family If family == osl_Socket_FamilyInet the address is
+                  set to INADDR_ANY port 0.
+    @return 0 if address could not be created.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_createEmptySocketAddr(
+        oslAddrFamily Family);
+
+
+/** Creates a new SocketAddress and fills it from Addr.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_copySocketAddr(
+        oslSocketAddr Addr);
+
+/** Compares the values of two SocketAddresses.
+    @retval sal_True if both addresses denote the same socket address.
+    @retval sal_False if both addresses do not denote the same socket address.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_isEqualSocketAddr(
+    oslSocketAddr Addr1, oslSocketAddr Addr2);
+
+/** Uses the systems name-service interface to find an address for strHostname.
+    @param[in] strHostname The name for which you search for an address.
+    @return The desired address if one could be found, otherwise 0.
+    Don't forget to destroy the address if you don't need it any longer.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_resolveHostname(
+        rtl_uString *strHostname);
+
+/** Create an internet address usable for sending broadcast datagrams.
+    To limit the broadcast to your subnet, pass your hosts IP address
+    in dotted decimal notation as first argument.
+    @see    osl_sendToSocket()
+    @see    oslSocketAddr
+    @param[in]  strDottedAddr dotted decimal internet address, may be 0.
+    @param[in]  Port port number in host byte order.
+    @retval 0 if address could not be created.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_createInetBroadcastAddr(
+    rtl_uString *strDottedAddr, sal_Int32 Port);
+
+
+/** Create an internet-address, consisting of host address and port.
+    We interpret strDottedAddr as a dotted-decimal inet-addr
+    (e.g. "141.99.128.50").
+    @param[in] strDottedAddr  String with dotted address.
+    @param[in] Port  portnumber in host byte order.
+    @retval 0 if address could not be created.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_createInetSocketAddr (
+    rtl_uString *strDottedAddr, sal_Int32 Port);
+
+
+/** Frees all resources allocated by Addr. The handle Addr must not
+    be used after the call anymore.
+*/
+SAL_DLLPUBLIC void SAL_CALL osl_destroySocketAddr(
+        oslSocketAddr Addr);
+
+/** Looks up the port-number designated to the specified service/protocol-pair.
+    (e.g. "ftp" "tcp").
+    @retval OSL_INVALID_PORT if no appropriate entry was found, otherwise the port-number.
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_getServicePort(
+        rtl_uString *strServicename, rtl_uString *strProtocol);
+
+
+
+/** Retrieves the address-family from the Addr.
+    @return the family of the socket-address.
+    In case of an unknown family you get osl_Socket_FamilyInvalid.
+*/
+SAL_DLLPUBLIC oslAddrFamily SAL_CALL osl_getFamilyOfSocketAddr(
+        oslSocketAddr Addr);
+
+
+/** Retrieves the internet port-number of Addr.
+    @return the port-number of the address in host-byte order. If Addr
+    is not an address of type osl_Socket_FamilyInet, it returns OSL_INVALID_PORT
+*/
+SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_getInetPortOfSocketAddr(
+        oslSocketAddr Addr);
+
+
+/** Sets the Port of Addr.
+    @param[in] Addr the SocketAddr to perform the operation on.
+    @param[in] Port is expected in host byte-order.
+    @retval sal_False if Addr is not an inet-addr.
+*/
+SAL_DLLPUBLIC sal_Bool SAL_CALL osl_setInetPortOfSocketAddr(
+        oslSocketAddr Addr, sal_Int32 Port);
+
+
+/** Returns the hostname represented by Addr.
+    @param[in] Addr The socket address from which to extract the hostname.
+    @param[out] strHostname The hostname represented by the address. If
+    there is no hostname to be found, it returns 0.
+*/
+SAL_DLLPUBLIC oslSocketResult SAL_CALL osl_getHostnameOfSocketAddr(
+        oslSocketAddr Addr, rtl_uString **strHostname);
+
+
+/** Gets the address in dotted decimal format.
+
+    @param[in] Addr The socket address from which to extract the dotted decimal address.
+    @param[out] strDottedInetAddr Contains the dotted decimal address
+    (e.g. 141.99.20.34) represented by the address.
+
+    @retval If the address is invalid or not of type osl_Socket_FamilyInet, it returns 0.
+    @retval osl_Socket_Ok
+    @retval osl_Socket_Error
+*/
+SAL_DLLPUBLIC oslSocketResult SAL_CALL osl_getDottedInetAddrOfSocketAddr(
+        oslSocketAddr Addr, rtl_uString **strDottedInetAddr);
+
+/** Sets the addr field in the struct sockaddr with pByteSeq. pByteSeq must be in network byte order.
+ */
+SAL_DLLPUBLIC oslSocketResult SAL_CALL osl_setAddrOfSocketAddr(
+        oslSocketAddr Addr, sal_Sequence *pByteSeq );
+
+/** Returns the addr field in the struct sockaddr.
+    @param[in] Addr The socket address from which to extract the ipaddress.
+    @param[out] ppByteSeq After the call, *ppByteSeq contains the ipaddress
+                     in network byte order. *ppByteSeq may be 0 in case of an invalid socket handle.
+    @retval osl_Socket_Ok
+    @retval osl_Socket_Error
+ */
+SAL_DLLPUBLIC oslSocketResult SAL_CALL osl_getAddrOfSocketAddr(
+        oslSocketAddr Addr, sal_Sequence **ppByteSeq );
+
+/*
+    Opaque datatype HostAddr.
+*/
+typedef struct oslHostAddrImpl * oslHostAddr;
+
+
+/** Create an oslHostAddr from given hostname and socket address.
+    @param[in] strHostname The hostname to be stored.
+    @param[in] Addr The socket address to be stored.
+    @return The created address or 0 upon failure.
+*/
+SAL_DLLPUBLIC oslHostAddr SAL_CALL osl_createHostAddr(
+        rtl_uString *strHostname, const oslSocketAddr Addr);
+
+
+/** Create an oslHostAddr by resolving the given strHostname.
+    Successful name resolution should result in the fully qualified
+    domain name (FQDN) and its address as hostname and socket address
+    members of the resulting oslHostAddr.
+    @param[in] strHostname The hostname to be resolved.
+    @return The resulting address or 0 upon failure.
+*/
+SAL_DLLPUBLIC oslHostAddr SAL_CALL osl_createHostAddrByName(rtl_uString *strHostname);
+
+
+/** Create an oslHostAddr by reverse resolution of the given Addr.
+    Successful name resolution should result in the fully qualified
+    domain name (FQDN) and its address as hostname and socket address
+    members of the resulting oslHostAddr.
+    @param[in] Addr The socket address to be reverse resolved.
+    @return The resulting address or 0 upon failure.
+*/
+SAL_DLLPUBLIC oslHostAddr SAL_CALL osl_createHostAddrByAddr(const oslSocketAddr Addr);
+
+
+/** Create a copy of the given Addr.
+    @return The copied address or 0 upon failure.
+*/
+SAL_DLLPUBLIC oslHostAddr SAL_CALL osl_copyHostAddr(const oslHostAddr Addr);
+
+
+/** Frees all resources allocated by Addr. The handle Addr must not
+    be used after the call anymore.
+*/
+SAL_DLLPUBLIC void SAL_CALL osl_destroyHostAddr(oslHostAddr Addr);
+
+
+/** Get the hostname member of Addr.
+    @return The hostname or 0 upon failure.
+*/
+SAL_DLLPUBLIC void SAL_CALL osl_getHostnameOfHostAddr(const oslHostAddr Addr, rtl_uString **strHostname);
+
+
+/** Get the socket address member of Addr.
+    @return The socket address or 0 upon failure.
+*/
+SAL_DLLPUBLIC oslSocketAddr SAL_CALL osl_getSocketAddrOfHostAddr(const oslHostAddr Addr);
+
+/** Retrieve this machines hostname (NOT the FQDN)
+    @param  strLocalHostname out-parameter. The string that receives the local host name.
+    @retval sal_True upon success
+    @retval sal_False
+*/
+SAL_DLLPUBLIC oslSocketResult SAL_CALL osl_getLocalHostname(rtl_uString **strLocalHostname);
+
+
+/**@} end section oslHostAddr
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // INCLUDED_OSL_SOCKET_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */